標準號 |
中文名稱 |
英文名稱 |
| BS EN 60068-2-58-1999 |
環境試驗.試驗方法.試驗Td.軟釬焊性、噴涂金屬耐融化性和表面裝配設備(SMD)耐焊接熱的試驗方法 |
Environmental testing - Test methods - Test Td - Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) |
| BS EN 60068-2-58-2004 |
環境試驗.試驗方法.試驗Td.表面安裝設備用可焊性、耐金屬溶融和耐焊接熱的試驗方法 |
|
| BS EN 60068-2-59-1991 |
環境試驗.第2部分:試驗.試驗Fe和導則.第59部分:振動(正弦拍頻法) |
Environmental testing - Test methods - Test Fe and guidance - Vibration (sine-beat method) |
| BS EN 60068-2-6-1996 |
基本環境試驗規程.第2部分:試驗.第6節:試驗Fc:振動(正弦波) |
Environmental testing - Test methods - Test Fc - Vibration (sinusoidal) |
| BS EN 60068-2-60-1996 |
環境試驗.第2部分:試驗.第60節:試驗Ke:流動混合氣體的腐蝕試驗 |
Environmental testing - Test methods - Test Ke - Flowing mixed gas corrosion test |
| BS EN 60068-2-61-1994 |
環境試驗.第2部分:試驗.第61節:試驗2/ABDM.氣候順序 |
Environmental testing - Test methods - Test Z/ABDM - Climatic sequence |
| BS EN 60068-2-64-1995 |
環境試驗.第2部分第64節:試驗方法.試驗Fh:振動、寬帶隨機抽樣(數字控制) |
Environmental testing - Test methods - Test Fh - Vibration, broad-band random (digital control) and guidance |
| BS EN 60068-2-65-1995 |
環境試驗.第2部分:試驗方法.第65節:試驗Fg:振動、聲響感應 |
(Environmental testing - Test methods - Test Fg - Vibration, acoustically induced) |
| BS EN 60068-2-66-1995 |
環境試驗.第2部分:試驗方法.試驗Cx穩態濕熱(非飽合加壓水蒸氣) |
(Environmental testing - Test methods - Test Cx - Damp heat, steady state (unsaturated pressurized vapour)) |
| BS EN 60068-2-67-1996 |
環境試驗規程.試驗方法.CY試驗.件初始條件下的濕熱試驗,沖擊試驗,加速試驗 |
(Environmental testing - Test methods - Test Cy - Damp heat, steady state, accelerated test primarily intended for components) |
| BS EN 60068-2-68-1996 |
環境試驗.第2部分:試驗方法.試驗L:塵和砂 |
(Environmental testing - Test methods - Test L. Dust and sand) |
| BS EN 60068-2-69-1996 |
環境試驗規程.第2部分:試驗.第69節:試驗Te:潤濕平衡法對表面鑲嵌技術用電子件的軟釬焊試驗 |
(Environmental testing - Test methods - Tests - Test Te - Solderability testing of electronic components for surface mount technology by the wetting balance method) |
| BS EN 60068-2-7-1993 |
環境試驗.試驗方法.試驗Ga和導則.穩態加速度 |
(Environmental testing - Test methods - Test Ga and guidance - Acceleration, steady state) |
| BS EN 60068-2-70-1996 |
環境試驗.試驗方法.試驗Xb:手和手指磨擦引起的字母及標記的磨蝕 |
(Environmental testing - Test methods - Test Xb - Abrasion of markings and letterings caused by rubbing of fingers and hands) |
| BS EN 60068-2-74-2000 |
環境試驗.試驗方法.試驗Xc:流體污染試驗 |
(Environmental testing - Test methods - Test Xc: Fluid contamination) |
| BS EN 60068-2-75-1997 |
環境試驗.試驗方法.試驗Eh.捶擊試驗 |
(Environmental testing - Test methods - Test Eh - Hammer tests) |
| BS EN 60068-2-77-1999 |
環境試驗.試驗方法.整體強度和沖擊 |
(Environmental testing - Test methods - Body strength and impact shock) |
| BS EN 60068-2-78-2002 |
環境試驗.試驗方法.試驗室:濕熱、穩定狀態 |
(Environmental testing - Test methods - Test Cab - Damp heat, steady state) |
| BS EN 60068-2-81-2003 |
環境試驗.試驗方法.試驗Ei.沖擊.沖擊響應頻譜合成 |
(Environmental testing - Test methods - Test Ei - Shock - Shock response spectrum synthesis) |
| BS EN 60068-2-9-2000 |
環境試驗.試驗方法.試驗.太陽輻射試驗指南 |
(Environmental testing - Test methods - Tests - Guidance for solar radiation testing) |
| BS EN 60068-3-1-1999 |
環境試驗.指南.低溫和干熱試驗 |
(Environmental testing - Guidance - Cold and dry heat tests) |
| BS EN 60068-3-2-1999 |
環境試驗.指南.組合溫度/低氣壓試驗 |
(Environmental testing - Guidance - Combined temperature/low air pressure tests) |
| BS EN 60068-3-3-1991 |
環境試驗.指南.環境試驗.其它.第3節:設備的抗震試驗方法指南 |
(Environmental testing - Guidance - Environmental testing - Miscellaneous - Guide to seismic test methods for equipment) |
| BS EN 60068-3-4-2002 |
環境試驗.指南.濕熱試驗 |
(Environmental testing - Guidance - Damp heat tests) |
| BS EN 60068-3-5-2002 |
環境試驗.指南.溫度室性能的確定 |
(Environmental testing - Guidance - Confirmation of the performance of temperature chambers) |
| BS EN 60068-3-6-2002 |
環境試驗.指南.溫度/潮濕室性能的確定 |
(Environmental testing - Guidance - Confirmation of the performance of temperature/humidity chambers) |
| BS EN 60068-3-7-2002 |
環境試驗.指南.試驗A和B(加載)用溫度室內的測量 |
(Environmental testing - Guidance - Measurements in temperature chambers for tests A and B (with load)) |
| BS EN 60068-3-8-2004 |
環境檢驗.導則.振動試驗的選擇 |
|
| BS EN 60068-3-8-2004 |
環境試驗.配套文件和指南.在振動試驗中選擇 |
|
| BS EN 60068-4-1996 |
環境試驗.規范編制者用材料.試驗總結 |
(Environmental testing - Information for specification writers - Test summaries) |
| BS EN 60068-5-2-2000 |
環境試驗.試驗方法起草指南.術語和定義 |
(Environmental testing - Guide to drafting of test methods - Terms and definitions) |
| BS EN 60071-1-1996 |
絕緣配合.第1部分:術語、定義、原理和規則 |
(Insulation co-ordination - Definitions, principles and rules) |
| BS EN 60071-2-1997 |
絕緣配合.應用指南 |
(Insulation co-ordination - Application guide) |
| BS EN 60073-2002 |
人機接口、標記和識別用基本和安全原理.顯示設備和調節器的編碼原理 |
(Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators) |
| BS EN 60076-1-1997 |
電力變壓器.第1部分:通則 |
(Power transformers - General) |
| BS EN 60076-10-2001 |
電力變壓器.聲音水平的測定 |
(Power transformers - Determination of sound levels) |
| BS EN 60076-2-1997 |
電力變壓器.升溫 |
(Power transformers - Temperature rise) |
| BS EN 60076-3-2001 |
電力變壓器.絕緣水平和介質性能試驗以及空氣中的外部間隙 |
(Power transformers - Insulation levels, dielectric tests and external clearances in air) |
| BS EN 60076-4-2002 |
電力變壓器.電光脈沖和開關脈沖測試指南.電力變壓器和電抗器 |
(Power transformers - Guide to the lightning impulse and switching impulse testing - Power transformers and reactors) |
| BS EN 60076-5-2001 |
電力變壓器.耐短路性 |
(Power transformers - Ability to withstand short circuit) |
| BS EN 60077-1-2003 |
鐵路設施.機車車輛用電氣設備.一般服務條件和一般規則 |
(Railway applications - Electric equipment for rolling stock - General service conditions and general rules) |
| BS EN 60077-2-2003 |
鐵路設施.機車車輛用電氣設備.一般規則 |
(Railway applications - Electric equipment for rolling stock - Electrotechnical components - General rules) |
| BS EN 60077-3-2003 |
鐵路設施.機車車輛用電氣設備.直流斷路器規則 |
(Railway applications - Electric equipment for rolling stock - Electrotechnical components - Rules for d.c. circuit-breakers) |
| BS EN 60077-4-2003 |
鐵路設施.機車車輛用電氣設備.電工件.交流斷路器規則 |
(Railway applications - Electric equipment for rolling stock - Electrotechnical components - Rules for AC circuit-breakers) |
| BS EN 60077-5-2003 |
鐵路設施.鐵路機車用電氣設備.電工組件.高壓熔斷器用規則 |
(Railway applications - Electric equipment for rolling stock - Electrotechnical components - Rules for HV fuses) |
| BS EN 60079-0-2004 |
爆炸性氣體環境用電氣設備.一般要求 |
|
| BS EN 60079-1-2004 |
爆炸性氣體環境用電氣設備.防火封裝d型 |
|
| BS EN 60079-10-2003 |
爆炸性氣體氣壓用電氣設備.危險場所的分類 |
(Electrical apparatus for explosive gas atmospheres - Classification of hazardous areas) |
| BS EN 60079-14-2003 |
爆炸性氣體環境用電氣設備.危險場所(礦井除外)中的電氣裝置 |
(Electrical apparatus for explosive gas atmospheres - Electrical installations in hazardous areas (other than mines)) |
| BS EN 60079-15-2003 |
爆炸性氣體環境用電氣設備.防護型“n“ |
(Electrical apparatus for explosive gas atmospheres - Type of protection “n“) |
| BS EN 60079-17-2003 |
爆炸性氣體氣壓用電氣設備.危險場所(礦井除外)電氣設備的檢驗和維護 |
(Electrical apparatus for explosive gas atmospheres - Inspection and maintenance of electrical installations in hazardous areas (other than mines)) |
| BS EN 60079-18-2004 |
爆炸性氣體環境用電氣設備.封裝保護m型電氣設備類的建造、試驗和標記 |
|
| BS EN 60079-2-2004 |
爆炸性氣體環境用電氣設備.壓力封裝型p |
|
| BS EN 60079-25-2004 |
爆炸性氣體環境用電氣設備.本安型系統 |
|
| BS EN 60079-7-2003 |
爆炸性氣體環境用電氣設備.增安型“e“ |
(Electrical apparatus for explosive gas atmospheres - Increased safety “e“) |
| BS EN 60081-1998 |
雙帽熒光燈.性能規范 |
(Double-capped fluorescent lamps - Performance specifications) |
| BS EN 60085-2004 |
電氣絕緣.耐熱性分類 |
|
| BS EN 60086-1-2001 |
原電池.概述 |
(Primary batteries - General) |
| BS EN 60086-2-2001 |
原電池組.物理和電氣規范 |
(Primary batteries - Physical and electrical specifications) |
| BS EN 60086-3-1996 |
原電池.第3部分:手表用電池 |
(Primary batteries - Watch batteries) |
| BS EN 60086-4-2000 |
原電池.鋰電池的安全標準. |
(Primary batteries - Safety standard for lithium batteries) |
| BS EN 60086-5-2001 |
原電池.含水電解質的電池的安全 |
(Primary batteries - Safety of batteries with aqueous electrolyte) |
| BS EN 60086-5-2005 |
原電池.含水電解質電池安全 |
|
| BS EN 60092-507-2000 |
船用電氣設備.游艇 |
(Electrical installations in ships - Pleasure craft) |
| BS EN 60094-1-1994 |
磁帶錄音和放音系統.第1部分:一般條件和要求規范 |
(Magnetic tape sound recording and reproducing systems - Specification for general conditions and requirements) |
| BS EN 60094-2-1996 |
校準磁帶 |
(Magnetic tape sound recording and reproducing systems - Calibration tapes) |
| BS EN 60094-3-1990 |
磁帶錄音和放音系統.磁帶錄音和放音設備特性的測量方法 |
(Magnetic tape sound recording and reproducing systems - Methods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape) |
| BS EN 60094-4-1987 |
磁帶錄音和放音系統.第4部分:磁帶的機械特性 |
(Magnetic tape sound recording and reproducing systems - Mechanical magnetic tape properties) |
| BS EN 60094-5-1989 |
磁帶錄音和還音系統.磁帶的特性規范 |
(Magnetic tape sound recording and reproducing systems - Specification for electrical magnetic tape properties) |
| BS EN 60094-7-1994 |
磁帶錄音和放音系統.商用和家用盒式錄音磁帶 |
(Magnetic tape sound recording and reproducing systems - Specification for cassettes for commercial tape records and domestic use) |
| BS EN 60095-2-1993 |
鉛酸啟動蓄電池組.第2部分:蓄電池尺寸和端子尺寸及標志 |
(Lead-acid starter batteries - Dimensions of batteries and dimensions and marking of terminals) |
| BS EN 60095-4-1993 |
鉛酸啟動蓄電池組.第4部分:重型商用車輛用蓄電池組的尺寸 |
(Lead-acid starter batteries - Dimensions of batteries for heavy commercial vehicles) |
| BS EN 60097-1993 |
印制電路的網格系統規范 |
(Specification for grid systems for printed circuits) |
| BS EN 60099-1-1994 |
過電壓限制器.交流系統過電壓限制器的非線性電阻器類型 |
(Surge arresters - Non-linear resistor type gapped surge arrestors for a.c. systems) |
| BS EN 60099-4-1993 |
電涌放電器.第4部分:交流系統用無氣隙金屬氧化物電涌放電器 |
(Surge arresters - Metal-oxide surge arresters without gaps for a.c. systems) |
| BS EN 60099-4-2004 |
避雷器.第4部分:交流電系統用無間隙金屬氧化物避雷器 |
|
| BS EN 60099-5-1997 |
過電壓限制器.選擇和應用的推薦方法 |
(Surge arresters - Selection and application recommendations) |
| BS EN 601-1995 |
鋁和鋁合金.鑄件.與食品接觸用鑄件的化學組成 |
(Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with food) |
| BS EN 601-2004 |
鋁和鋁合金.鑄件.與食品接觸用鑄件的化學成分 |
|
| BS EN 601-2004 |
鋁和鋁合金.鑄件.與食品接觸用鑄件的化學成分 |
|
| BS EN 60107-1-1997 |
電視廣播傳輸接收機的測量方法.第1部分:一般原理.顯示器上無線電和視頻頻率的測量 |
(Methods of measurement on receivers for television broadcast transmission - General considerations - Measurements on displays at radio and video frequencies) |
| BS EN 60107-2-1997 |
電視廣播傳輸接收機的測量方法.第2部分:聲頻通道.單音通道用一般方法 |
(Methods of measurement on receivers for television broadcast transmission - Audio channels - General methods and methods for monophonic channels) |
| BS EN 60107-5-1999 |
電視廣播傳輸接收機的測量方法.用NICAM兩頻道數字聲音系統的多頻道聲音電視接收器的電氣測量 |
(Methods of measurement on receivers for television broadcast transmission - Electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system) |
| BS EN 60107-7-1997 |
電視廣播傳輸接收機的測量方法.HDTV顯示器 |
(Methods of measurement on receivers for television broadcast transmission - HDTV displays) |
| BS EN 60107-8-1997 |
電視廣播傳輸接收機的測量方法.第8部分:D2-MAC信息包設備上的測量 |
(Methods of measurement on receivers for television broadcast transmission - Measurements on D2-MAC/packet equipment) |
| BS EN 60110-1-1998 |
感應加熱安裝的電力電容器.概述 |
(Power capacitors for induction heating installations - General) |
| BS EN 60112-2003 |
固體絕緣材料的比較起痕指數和耐泄痕指數的測定方法 |
(Method for the determination of the proof and the comparative tracking indices of solid insulating materials) |
| BS EN 60115-1-2002 |
電子設備用固定電阻器.總規范 |
(Fixed resistors for use in electronic equipment - Generic specification) |
| BS EN 60115-9-1-2004 |
電子設備用固定電阻器.空白詳細規范.帶可單獨測量電阻器的表面安裝固定電阻網絡.評定水平EZ |
|
| BS EN 60115-9-1-2004 |
電子設備用固定電阻器.空白詳細規范.帶可單獨測量電阻器的固定表面安裝電阻網絡.評定等級EZ |
|
| BS EN 60115-9-2004 |
電子設備用固定電阻器.分規范.帶可單獨測量電阻器的表面安裝固定電阻網絡 |
|
| BS EN 60118-0-1984 |
助聽器.電聲特性測量方法 |
(Hearing aids - Methods for measurement of electroacoustical characteristics) |
| BS EN 60118-1-1995 |
助聽器.提供有感應線圈的助聽器 |
(Hearing aids - Hearing aids with induction pick-up coil input) |
| BS EN 60118-12-1997 |
助聽器.第12部分:電子連接器系統的尺寸 |
(Hearing aids - Dimensions of electrical connector systems) |
| BS EN 60118-13-1998 |
助聽器.電磁兼容性(EMC).產品標準 |
(Hearing aids - Electromagnetic compatibility (EMC) - Product standard) |
| BS EN 60118-14-1998 |
助聽器.數字接口裝置規范 |
(Hearing aids - Specification of a digital interface device) |
| BS EN 60118-2-1996 |
助聽器.第2部分:帶自動增益控制電路助聽器電聲特性的測量方法 |
(Hearing aids - Methods for measurement of electroacoustical characteristics of hearing aids with automatic gain control circuits) |
| BS EN 60118-4-1998 |
助聽器.助聽用音頻感應環路的磁場強度 |
(Hearing aids - Magnetic field strength in audio-frequency induction loops for hearing aid purposes) |
| BS EN 60118-6-1999 |
助聽器.助聽器用電氣輸入電路的特性 |
(Hearing aids - Characteristics of electrical input circuits for hearing aids) |
| BS EN 60118-7-1985 |
助聽器.交貨質量檢驗用助聽器的性能測量方法 |
(Hearing aids - Methods for measurement of the performance characteristics of hearing aids for quality inspection on delivery) |
| BS EN 60122-1-2003 |
經過質量評定的石英晶體件.總規范 |
(Quartz crystal units of assessed quality - Generic specification) |
| BS EN 60122-3-2002 |
質量評定過的石英晶體件.標準外形和引線連接 |
(Quartz crystal units of assessed quality - Standard outlines and lead connections) |
| BS EN 60127-1-1991 |
小型熔斷器.第1部分:小型熔斷器定義和小型熔斷片的一般要求 |
(Miniature fuses - Definitions for miniature fuses and general requirements for miniature fuse-links) |
| BS EN 60127-10-2002 |
小型熔斷器.小型熔斷器的用戶指南 |
(Miniature fuses - User guide for miniature fuses) |
| BS EN 60127-2-2003 |
微型熔斷器.管式熔斷體 |
(Miniature fuses - Cartridge fuse-links) |
| BS EN 60127-3-1996 |
微型熔斷器.超微型熔斷體 |
(Miniature fuses - Specification for sub-miniature fuse-links) |
| BS EN 60127-4-1998 |
小型熔斷器.普通模數熔斷鏈(UMF) |
(Miniature fuses - Universal modular fuse-links (UMF)) |
| BS EN 60127-5-1991 |
小型熔斷器.小型熔絲鏈質量評定指南 |
(Miniature fuses - Guide for the quality assessment of miniature fuse-links) |
| BS EN 60127-6-1994 |
小型熔斷器.小型管狀熔斷片用熔斷器支持件 |
(Miniature fuses - Fuse-holders for miniature cartridge fuse-links) |
| BS EN 60130-17-1999 |
頻率低于3MHz的連接器.使用可充電電池的允許多向連接的互連裝置的詳細規范 |
(Connectors for frequencies below 3 MHz - Detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries) |
| BS EN 60130-9-2001 |
3MHz以下頻率的連接器.無線電和相關聲音設備的環形連接器 |
(Connectors for frequencies below 3 MHz - Circular connectors for radio and associated sound equipment) |
| BS EN 60133-2001 |
由磁性氧化物和相關部件制造的芯尺寸 |
(Dimensions of pot-cores made of magnetic oxides and associated parts) |
| BS EN 60137-2003 |
交流電壓1000V以上絕緣套管 |
(Insulated bushings for alternating voltages above 1000 V) |
| BS EN 60139-2001 |
陰極射線管的外形圖的準備及其部件、連接和量規 |
(Preparation of outline drawings for cathode-ray tubes, their components, connections and gauges) |
| BS EN 60143-1-1993 |
電力系統用串聯電容器.第1部分:概述.工作性能.檢驗和測量.安全要求.建造規范 |
(Series capacitors for power systems - General - Performance, testing and rating - Safety requirements - Guide for installation) |
| BS EN 60143-1-2005 |
電力系統用串聯電容器.總則 |
|
| BS EN 60143-2-1995 |
電力系統用串聯電容器.串聯電容器組用保護裝置. |
(Series capacitors for power systems - Protective equipment for series capacitor banks) |
| BS EN 60143-3-1998 |
電力系統用串聯電容器.內部熔斷器 |
(Series capacitors for power systems - Internal fuses) |
| BS EN 60146-2-2000 |
半導體變流器.一般要求和線路換向變流器.包括直流變換器的自換向變流器 |
(Semiconductor convertors - General requirements and line commutated convertors - Self-commutated semiconductor converters including direct d.c. converters) |
| BS EN 60154-1-1996 |
波導法蘭.一般要求 |
(Flanges for waveguides - General requirements) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com