標準號 |
中文名稱 |
英文名稱 |
| BS 5871-1-2001 |
燃氣爐、對流式加熱器、回火鍋爐和有裝飾性燃料效果燃氣器具規格.用1類、2類、3類家用燃氣的燃氣爐、對流式 |
(Specification for installation of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances - Gas fires, convector heaters, fire/back boilers and heating stoves (1st, 2) |
| BS 5871-2-2001 |
燃氣爐、對流式加熱器、回火鍋爐和裝飾性燃料效應燃氣器具安裝規范.第2部分:輸入熱量不超過15kW的插入式燃 |
(Specification for installation of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances - Inset live fuel effect gas fires of heat input not exceeding 15 kW, and fi) |
| BS 5871-3-2001 |
燃氣爐、對流式加熱器、回火鍋爐和裝飾性燃料效應燃氣器具安裝規范. 第3部分:輸入熱量不超過20kW的裝飾性燃 |
(Specification for installation of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances - Decorative fuel effect gas appliances of heat input not exceeding 20 kW (2) |
| BS 5873-1-1980 |
教學家具.第1部分:教育機構用的桌椅的標志和完成及功能規格 |
(Educational furniture - Specification for functional dimensions, identification and finish of chairs and tables for educational institutions) |
| BS 5873-2-1991 |
教學家具.第2部分:教育機構用的椅子強度及穩定性規范 |
(Educational furniture - Specification for strength and stability of chairs for educational institutions) |
| BS 5873-3-1985 |
教學家具.第3部分:教育機構用的桌子的強度及穩定性規范 |
(Educational furniture - Specification for strength and stability of tables for educational institutions) |
| BS 5873-4-1998 |
教學家具.教育機構用的儲存家具的強度及穩定性規范 |
(Educational furniture - Specification for strength and stability of storage furniture for educational institutions) |
| BS 5873-5-1998 |
教育設施.教育機構固定保護存儲設施的安全性規范. |
(Educational furniture - Specification for security of fixed secure storage furniture for educational institutions) |
| BS 5876-1980 |
電視接收機主觀觀察試驗指南 |
(Guide for subjective viewing tests for television receivers) |
| BS 5877-1980 |
無線電收音機主觀收聽試驗指南 |
(Guide for subjective listening tests for sound radio receivers) |
| BS 5879-1980 |
紙浸水后尺寸變化的測量方法 |
(Method for measurement of dimensional change of paper after immersion in water) |
| BS 5880-1990 |
紙和紙板浸水后吸水量的測定方法 |
(Method for determination of water absorption of paper and board after immersion in water) |
| BS 5881-1980 |
整塊纖維板單層重量(克數)的測定方法 |
(Method for determination of grammage of single layers of solid fibreboard) |
| BS 5882-1996 |
核設施全面質量保證方案規范 |
(Specification for a total quality assurance programme for nuclear installations) |
| BS 5883-1996 |
水面游泳護目眼鏡規范 |
(Specification for surface swimming goggles) |
| BS 5884-1999 |
磁性材料.弱磁性材料的相對磁導率的測定方法 |
(Magnetic materials - Methods for the determination of the relative magnetic permeability of feebly magnetic materials) |
| BS 5886-1980 |
石棉水泥管路的現場壓力試驗方法 |
(Methods for field pressure testing of asbestos-cement pipelines) |
| BS 5889-1989 |
單一組分槍噴式硅酮基密封劑 |
(Specification for one-part gun grade silicone-based sealants) |
| BS 5890-1980 |
電容器和電阻器標志用顏色的選擇指南 |
(Guide for choice of colours to be used for the marking of capacitors and resistors) |
| BS 5891-1980 |
農用掛車及牽引機具的環形連結器規范 |
(Specification for ring-type hitches on agricultural trailers and towed implements) |
| BS 5892-2-1992 |
鐵路車輛材料.第2部分:鍛造和軋制的輪體規范 |
(Railway rolling stock materials - Specification for forged and rolled wheel centres) |
| BS 5892-3-1992 |
鐵路車輛材料.第3部分:牽引車輛及其以外的客貨車輛單個車輪規范 |
(Railway rolling stock materials - Specification for monobloc wheels for traction and trailing stock) |
| BS 5892-4-1992 |
鐵路車輛材料.第4部分:煅造和軋制輪箍規范 |
(Railway rolling stock materials - Specification for forged and rolled tyres) |
| BS 5892-5-1987 |
鐵路車輛材料(米制).第5部分:輪箍式車輪扣環用條鋼規范 |
(Railway rolling stock materials - Specification for steel bars for retaining rings for tyred wheels) |
| BS 5892-6-1992 |
鐵路車輛材料.第6部分:牽引車輛及其以外的客貨車輛輪組規范 |
(Railway rolling stock materials - Specification for wheelsets for traction and trailing stock) |
| BS 5895-1980 |
實驗室裝置用硼硅酸鹽玻璃管規范 |
(Specification for borosilicate glass tubing for laboratory apparatus) |
| BS 5896-1980 |
預應力混凝土用高抗拉鋼絲絞合線規范 |
(Specification for high tensile steel wire and strand for the prestressing of concrete) |
| BS 5898-1980 |
實驗室用容量玻璃器皿的設計及制作原理規范 |
(Specification for principles of design and construction of volumetric glassware for laboratory use) |
| BS 5900-1999 |
帶部分封閉車箱、無升降機井空間的住宅用電梯規范 |
(Specification for powered domestic lifts with partially enclosed cars and no lift-well enclosures) |
| BS 5904-1980 |
計算機程序設計語言RTL/2規范 |
(Specification for computer programming language RTL/2) |
| BS 5905-1980 |
計算機程序設計語言CORAL66規范 |
(Specification for computer programming language CORAL 66) |
| BS 5906-1980 |
建筑物內固體廢棄物的存放及就地處理實用規程 |
(Code of practice for storage and on-site treatment of solid waste from buildings) |
| BS 5908-1990 |
化學及化學工業防火實用規程 |
(Code of practice for fire precautions in the chemical and allied industries) |
| BS 5909-1980 |
無氧銅的硬殼密著力試驗方法 |
(Method for scale adhesion test for oxygen-free copper) |
| BS 5911-1-2002 |
預制混凝土管、管配件和輔助制品.具有軟接頭的非加筋、加筋混凝土管(包括套管)和管配件規范 |
(Precast concrete pipes, fittings and ancillary products - Specification for unreinforced and reinforced concrete pipes (including jacking pipes) and fittings with flexible joints (complementary to BS) |
| BS 5911-103-1994 |
預制混凝土管和混凝土附件產品.帶柔性接頭的預應非壓力管和配件的規范 |
(Precast concrete pipes, fittings and ancillary products - Specification for prestressed non-pressure pipes and fittings with flexible joints) |
| BS 5911-110-1992 |
下水道和污水工程用預制混凝土管道和配件.S型管道和配件(包括多孔管)規范 |
(Precast concrete pipes, fittings and ancillary products - Specification for ogee pipes and fittings (including perforated)) |
| BS 5911-114-1992 |
下水道和污水工程用預制混凝土管道和配件.第114部分:多孔管道規范 |
(Precast concrete pipes, fittings and ancillary products - Specification for porous pipes) |
| BS 5911-230-1994 |
預制混凝土管道、配件及輔助混凝土產品.第230部分:道路集水溝及集水溝封蓋物厚板材的規范 |
(Precast concrete pipes, fittings and ancillary products - Specification for road gullies and gully cover slabs) |
| BS 5911-3-2002 |
預制混凝土管、管配件和輔助制品.未加筋和加筋混凝土人孔及滲水坑規范 |
(Precast concrete pipes, fittings and ancillary products - Specification for unreinforced and reinforced concrete manholes and soakaways (complementary to BS EN 1917:2002)) |
| BS 5911-4-2002 |
預制混凝土管、管配件和輔助制品.未加筋和加筋混凝土觀察孔規范 |
(Precast concrete pipes, fittings and ancillary products - Specification for unreinforced and reinforced concrete inspection chambers (complementary to BS EN 1917:2002)) |
| BS 5911-5-2004 |
預制混凝土管、配件和輔助制品.帶軟接頭的預應力非壓力管道和配件的規范 |
|
| BS 5911-6-2004 |
預制混凝土管、配件和輔助制品.道路集水溝和集水溝封蓋厚板材的規范 |
|
| BS 5911-6-2004 |
混凝土管和輔助混凝土制品.道路集水溝和集水溝封蓋厚板材的規范 |
|
| BS 5912-1980 |
直柄鉆頭及機鉸刀用轉動榫及套筒的尺寸規范 |
(Specification for dimensions of driving tenons and sockets for parallel shank drills and machine reamers) |
| BS 5915-1980 |
礦井口容器中放射性礦石檢定和分選規范 |
(Specification for equipment for minehead assay and sorting radioactive ores in containers) |
| BS 5918-1989 |
家用熱水太陽能加熱系統的實用規程 |
(Code of practice for solar heating systems for domestic hot water) |
| BS 5920-1980 |
鋪地織物試樣尺寸的測定方法 |
(Method for determination of dimensions of textile floor covering test specimens) |
| BS 5922-1980 |
實驗室用玻璃冷凝器規范 |
(Specification for glass condensers for laboratory use) |
| BS 5923-2-1980 |
橡膠的化學分析方法.第2部分:橡膠制品鋅含量測定用EDTA滴定法 |
(Methods for chemical analysis of rubber - EDTA titrimetric method for determination of zinc content of rubber products) |
| BS 5924-1989 |
電阻焊及其類似加工設備的結構和裝置的安全要求規范 |
(Specification for safety requirements for the construction and the installation of equipment for resistance welding and allied processes) |
| BS 5925-1991 |
自然通風的通風原理和設計實施規程 |
(Code of practice for ventilation principles and designing for natural ventilation) |
| BS 5927-1980 |
石棉水泥管道敷設指南 |
(Guide for laying of asbestos-cement pipelines) |
| BS 5929-1-1986 |
食品感官分析方法.第1部分:方法論通用指南 |
(Methods for sensory analysis of food - General guide to methodology) |
| BS 5929-10-1999 |
食品的感官分析法.食品顏色評估的一般指南和試驗方法 |
(Methods for sensory analysis of food - General guidance and test method for assessment of the colour of foods) |
| BS 5929-2-1982 |
食品感官分析方法.第2部分:配對對照試驗 |
(Methods for sensory analysis of food - Paired comparison test) |
| BS 5929-3-1984 |
食品感官分析方法.第3部分:三角形試驗 |
(Methods for sensory analysis of food - Triangular test) |
| BS 5929-4-1986 |
食品感官分析方法.第4部分:香味型法 |
(Methods for sensory analysis of food - Flavour profile methods) |
| BS 5929-5-1988 |
食品感官分析方法.第5部分:“Ａ”和“非Ａ”試驗 |
(Methods for sensory analysis of food - ’A’-’not A’ test) |
| BS 5929-6-1989 |
食品的感官分析法.第6部分:等級法 |
(Methods for sensory analysis of food - Ranking) |
| BS 5929-7-1992 |
食品感官分析方法.第7部分:味覺靈敏度的測定 |
(Methods for sensory analysis of food - Investigating sensitivity of taste) |
| BS 5929-8-1992 |
食品感官分析方法.雙三試驗法 |
(Methods for sensory analysis of food - Duo-trio test) |
| BS 5929-9-1992 |
食品的感官分析法.第9部分:對鑒定人員進行氣味檢測和辨別的培訓和傳授 |
(Methods for sensory analysis of food - Initiation and training of assessors in the detection and recognition of odours) |
| BS 593-1990 |
實驗室溫度計規范 |
(Specification for laboratory thermometers) |
| BS 5930-1999 |
廠址調查實施規范 |
(Code of practice for site investigations) |
| BS 5931-1980 |
鋪砌區用的現場邊緣部分機械鋪設實用規程 |
(Code of practice for machine laid in situ edge details for paved areas) |
| BS 5934-1980 |
連續機械裝卸設備空載時帶式輸送機的操縱動力和拉力的計算方法 |
(Method for calculation of operating power and tensile forces in belt conveyors with carrying idlers on continuous mechanical handling equipment) |
| BS 5935-1980 |
軟磁性材料制環形帶繞鐵芯規范 |
(Specification for toroidal strip-wound cores made of magnetically soft material) |
| BS 5938-1-1984 |
電信用感應器及變壓器鐵芯.第1部分:測量方法 |
(Cores for inductors and transformers for telecommunications - Methods of measurement) |
| BS 5938-2-1980 |
電信用感應器及變壓器鐵芯.第2部分:性能規范制訂指南 |
(Cores for inductors and transformers for telecommunications - Guide to the drafting of performance specifications) |
| BS 5939-1995 |
谷物及谷物制品的術語詞匯 |
(Glossary of terms for cereals and cereal products) |
| BS 594 Pt.2-1992 |
道路和其他鋪砌區用熱壓地瀝青.第2部分:碾壓地瀝青的運輸、敷設和壓實規范 |
(Hot rolled asphalt for roads and other paved areas. Specification for the transport, laying and compaction of rolled asphalt) |
| BS 594-1-2003 |
道路和其他鋪砌區用熱壓制瀝青.組分材料與地瀝青混合物規范 |
(Hot rolled asphalt for roads and other paved areas - Specification for constituent materials and asphalt mixtures) |
| BS 594-2-2003 |
道路和其他鋪砌區用熱壓制瀝青.熱壓制瀝青的運輸、鋪設和壓實規范 |
(Hot rolled asphalt for roads and other paved areas - Specification for transport, laying and compaction of hot rolled asphalt) |
| BS 5941-1980 |
1英寸標準電容式傳聲器在自由場和壓力靈敏度之間的差值規范 |
(Specification for values for the difference between free-field and pressure sensitivity levels for one-inch standard condenser microphones) |
| BS 5942-1-1980 |
高保真度音頻設備及系統.最低性能要求.第1部分:一般要求規范 |
(High fidelity audio equipment and systems; minimum performance requirements - Specification for general requirements) |
| BS 5942-11-1989 |
高保真度音響設備及系統.最低性能要求.車輛(例如汽車)用高保真度系統的規范.一般要求 |
(High fidelity audio equipment and systems; minimum performance requirements - Specification for high fidelity systems for use in vehicles (for example, motor cars); general requirements) |
| BS 5942-12-1989 |
高保真度音響設備及系統.最低性能要求.第12部分:電視調諧器音頻輸出規范 |
(High fidelity audio equipment and systems; minimum performance requirements - Specification for the sound output of television tuners) |
| BS 5942-13-1989 |
高保真度音響設備及系統.最低性能要求.車輛(如:汽車)用高保真系統規范.調頻無線電調諧裝置 |
(High fidelity audio equipment and systems; minimum performance requirements - Specification for high fidelity systems for use in vehicles (for example, motor cars); FM radio tuner units) |
| BS 5942-2-1987 |
高保真度音頻設備及系統.最低性能要求.第2部分:調頻無線電調諧器規范 |
(High fidelity audio equipment and systems; minimum performance requirements - Specification for FM radio tuners) |
| BS 5942-3-1980 |
高保真度音頻設備及系統.最低性能要求.第3部分:電唱設備和盒式磁帶規范 |
(High fidelity audio equipment and systems; minimum performance requirements - Specification for record playing equipment and cartridges) |
| BS 5942-4-1980 |
高保真度音頻設備及系統.最低性能要求.第4部分:磁性錄音和放音設備規范 |
(High fidelity audio equipment and systems; minimum performance requirements - Specification for magnetic recording and reproducing equipment) |
| BS 5942-5-1983 |
高保真度音頻設備及系統.最低性能要求.第5部分:傳聲器規范 |
(High fidelity audio equipment and systems; minimum performance requirements - Specification for microphones) |
| BS 5942-7-1987 |
高保真度音頻設備及系統.最低性能要求 第7部分:揚聲器規范 |
(High fidelity audio equipment and systems; minimum performance requirements - Specification for loudspeakers) |
| BS 5942-8-1987 |
高保真度音頻設備及系統.最低性能要求.第8部分:組合設備規范 |
(High fidelity audio equipment and systems; minimum performance requirements - Specification for combination equipment) |
| BS 5943-1980 |
矯形鞋靴的測量及記錄方法 |
(Methods for measurement and recording for orthopaedic footwear) |
| BS 5944-1-1992 |
液壓動力系統和部件所產生的空氣噪聲的測量.第1部分:泵的試驗方法 |
(Measurement of airborne noise from hydraulic fluid power systems and components - Method of test for pumps) |
| BS 5944-2-1992 |
液壓動力系統和部件所產生的空氣噪聲的測量.第2部分:電動機的試驗方法 |
(Measurement of airborne noise from hydraulic fluid power systems and components - Method of test for motors) |
| BS 5944-4-1984 |
液壓動力系統和部件所產生的空氣噪音的測量.第4部分:流量和壓力控制閥聲功率級的測定方法 |
(Measurement of airborne noise from hydraulic fluid power systems and components - Method of determining sound power levels from valves controlling flow and pressure) |
| BS 5944-5-1985 |
液壓動力系統和部件所產生的空氣噪音的測量.第5部分:使用消聲室測定泵的聲功率級的簡易方法 |
(Measurement of airborne noise from hydraulic fluid power systems and components - Simplified method of determining sound power levels from pumps using an anechoic chamber) |
| BS 5944-6-1992 |
液壓動力系統和部件所產生的空氣噪音的測量.第6部分:利用平行六面體傳聲器陳列的泵的試驗方法 |
(Measurement of airborne noise from hydraulic fluid power systems and components - Method of test for pumps using a parallelepiped microphone array) |
| BS 5946-1980 |
測定苯酚-甲醛泡沫塑料燃燒特性的試驗方法 |
(Method of test for determination of the punking behaviour of phenol-formaldehyde foam) |
| BS 5947-1992 |
包括驗收條件的農用輪式拖拉機保護座艙及機架的靜負荷試驗方法 |
(Method of test for static loading of protective cabs and frames for agricultural wheeled tractors, including acceptance conditions) |
| BS 5950-1-2001 |
建筑中使用的鋼制結構.設計的實施規范.軋制和焊接型材 |
(Structural use of steelwork in building - Code of practice for design - Rolled and welded sections) |
| BS 5950-2-2001 |
建筑物中使用的鋼制件.材料、制造和裝配規范.軋制及焊接型材 |
(Structural use of steelwork in building - Specification for materials, fabrication and erection - Rolled and welded sections) |
| BS 5950-3.1-1990 |
建筑中使用的鋼制結構.第3部分:復合結構的設計.第1節:單一或連續復合梁設計的實用規程 |
(Structural use of steelwork in building - Design in composite construction - Code of practice for design of simple and continuous composite beams) |
| BS 5950-4-1994 |
建筑中使用的鋼制結構.用成型鋼制作復合厚板材的設計實用規程 |
(Structural use of steelwork in building - Code of practice for design of composite slabs with profiled steel sheeting) |
| BS 5950-5-1998 |
建筑物構架結構應用.冷變形薄量規部分設計規程. |
(Structural use of steelwork in building - Code of practice for design of cold formed thin gauge sections) |
| BS 5950-6-1995 |
建筑物中使用的結構鋼制件.第6部分:薄壁鋼板設計實施規程 |
(Structural use of steelwork in building - Code of practice for design of light gauge profiled steel sheeting) |
| BS 5950-7-1992 |
建筑物中使用的鋼制件.第7部分:材料和工藝規范:冷加工型材 |
(Structural use of steelwork in building - Specification for materials and workmanship: cold formed sections) |
| BS 5950-8-2003 |
建筑中使用的鋼制結構.耐火性設計實施規程 |
(Structural use of steelwork in building - Code of practice for fire resistant design) |
| BS 5950-9-1994 |
建筑用鋼制件.應力外殼設計實施法規 |
(Structural use of steelwork in building - Code of practice for stressed skin design) |
| BS 5952-1980 |
電子設備用的白云母件規范 |
(Specification for muscovite mica components for electronic equipment) |
| BS 5954-2-1985 |
482.6mm(19in)系列的機械結構尺寸.第2部分:框架結構的機殼和高跨比規范 |
(Dimensions of mechanical structures of the 482.6 mm (19 in) series - Specification for cabinets and pitches of rack structures) |
| BS 5954-3-1985 |
482.6mm(19in)系列的機械結構尺寸.第3部分:小框架與其插件規范 |
(Dimensions of mechanical structures of the 482.6 mm (19 in) series - Specification for subracks and associated plug-in units) |
| BS 5955-6-1980 |
塑料管道工程(熱塑性塑料).第6部分:自重排水和下水道用未增塑聚氯乙烯管道工程安裝實用規程 |
(Plastics pipework (thermoplastics materials) - Code of practice for the installation of unplasticized PVC pipework for gravity drains and sewers) |
| BS 5955-8-2001 |
塑料管道工程(熱塑性塑料).家用冷、熱水設施和建筑物中加熱系統用的熱塑性塑料管道工程及其配件的安裝規范 |
(Plastics pipework (thermoplastics materials) - Specification for the installation of thermoplastic pipes and associated fittings for use in domestic hot and cold services and heating systems in buildi) |
| BS 5958-1-1992 |
有害靜電控制用實用規程.總設想 |
(Code of practice for control of undesirable static electricity - General considerations) |
| BS 5958-2-1992 |
控制靜電干擾實用規程.特殊工業環境用推薦規程 |
(Code of practice for control of undesirable static electricity - Recommendations for particular industrial situations) |
| BS 5960-1980 |
復印機技術規格頁最低限度信息規范 |
(Specification for minimum information to be included in specification sheets of duplicators) |
| BS 5961-1980 |
電絕緣用塑料薄膜及薄片摩擦系數的測定方法 |
(Method for determination of coefficients of friction of plastic film and sheeting for use as electrical insulation) |
| BS 5962-1980 |
萘規范(包括試驗方法) |
(Specifications for naphthalene (including test methods)) |
| BS 5964-1-1990 |
建筑放樣和測量.第1部分:測量、計劃和組織方法與驗收準則 |
(Building setting out and measurement - Methods of measuring, planning and organization and acceptance criteria) |
| BS 5964-2-1996 |
房屋的測量方法.定線和測量.第2部分:測量點和測量目標 |
(Building setting out and measurement - Measuring stations and targets) |
| BS 5964-3-1996 |
房屋的放樣和測量方法.第3部分:調查及測量設備采購用清單 |
(Building setting out and measurement - Check-lists for the procurement of surveys and measurement services) |
| BS 5965-1980 |
手動平衡式載人住宅電梯規范 |
(Specification for manually driven balanced personal homelifts) |
| BS 5970-2001 |
溫度范圍從-100℃至+870℃的管道工程及設備隔熱的實施規程 |
(Code of practice for thermal insulation of pipework and equipment in the temperature range of -100 鳦 to +870 鳦) |
| BS 5972-1980 |
道路照明用光電控制裝置規范 |
(Specification for photoelectric control units for road lighting) |
| BS 5973-1993 |
鋼制通道和工作腳手架和專用腳手架結構實用規程 |
(Code of practice for access and working scaffolds and special scaffold structures in steel) |
| BS 5974-1990 |
臨時安裝的懸掛的腳手架和入口設備實用規程 |
(Code of practice for temporarily installed suspended scaffolds and access equipment) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com