標準號 |
中文名稱 |
英文名稱 |
| BS 6349-2-1988 |
海上建筑實用規程.試驗.試驗Ea指南:沖擊碼頭圍墻突堤及系船柱的設計 |
(Maritime structures - Design of quay walls, jetties and dolphins) |
| BS 6349-3-1988 |
海上建筑實用規程.干船塢、閘、滑臺以及造船用船臺、船吊及船塢與閘門的設計 |
(Maritime structures - Design of dry docks, locks, slipways and shipbuilding berths, shiplifts and dock and lock gates) |
| BS 6349-4-1994 |
海上建筑實用規程.第4部分:護舷系統和系泊系統的設計 |
(Maritime structures - Code of practice for design of fendering and mooring systems) |
| BS 6349-5-1991 |
海工建筑物.疏浚和土地填筑的實施規范 |
(Maritime structures - Code of practice for dredging and land reclamation) |
| BS 6349-6-1989 |
海上建筑實用規程.沿海停泊所和浮動建筑的設計 |
(Maritime structures - Design of inshore moorings and floating structures) |
| BS 6349-7-1991 |
海上建筑.第7部分:防波堤設計、施工導則 |
(Maritime structures - Guide to the design and construction of breakwaters) |
| BS 6350-1983 |
炸魚和炸土豆塊用的燃?xì)庠钜?guī)范 |
(Specification for gas heated fish and chip frying ranges) |
| BS 6351-1-1983 |
電表面加熱.第1部分:電表面加熱裝置規范 |
(Electric surface heating - Specification for electric surface heating devices) |
| BS 6351-2-1983 |
電表面加熱.第2部分:電表面加熱系統的設計指南 |
(Electric surface heating - Guide to the design of electric surface heating systems) |
| BS 6351-3-1983 |
電表面加熱.第3部分:電表面加熱系統的安裝、調試和維修實用規程 |
(Electric surface heating - Code of practice for the installation, testing and maintenance of electric surface heating systems) |
| BS 6352-1983 |
帶磨砂玻璃接頭的燒瓶規范 |
(Specification for flasks with ground glass joints) |
| BS 6353-1983 |
煤礦中地下擴音通信設備系統 |
(Specification for underground loudspeaker communication systems in coal mines) |
| BS 6354-1983 |
縮微閱讀機的屏幕亮度、對比度和反射率的測量方法 |
(Method for measuring the screen luminance, contrast and reflectance of microform readers) |
| BS 6356-1-1997 |
農作物防護用噴霧設備.噴嘴的試驗方法 |
(Spraying equipment for crop protection - Method of test for sprayer nozzles) |
| BS 6356-10-1997 |
作物保護噴霧設備.農業水壓噴霧器容積/公頃調整系統試驗方法 |
(Spraying equipment for crop protection - Test method for volume/hectare adjustment systems of agricultural hydraulic pressure sprayers) |
| BS 6356-11-1997 |
作物保護.農業噴灌設備.總殘留物量的測定 |
(Spraying equipment for crop protection - Agricultural sprayers - Determination of the volume of total residual) |
| BS 6356-12-1997 |
作物保護設備.噴霧咀.識別色碼 |
(Spraying equipment for crop protection - Sprayer nozzles - Colour coding for identification) |
| BS 6356-13-1997 |
作物保護噴物設備.空氣輻助噴霧器.噴嘴旋軸螺母的尺寸 |
(Spraying equipment for crop protection - Air-assisted sprayers - Dimensions of nozzle swivel nuts) |
| BS 6356-14-1997 |
作物保護設備.噴霧設備.第14部分:農業噴霧機的試驗方法 |
(Spraying equipment for crop protection - Test methods for hydraulic sprayers) |
| BS 6356-15-1997 |
作物保護用噴霧設備.典型布置方案 |
(Spraying equipment for crop protection - Typical layout) |
| BS 6356-16-1997 |
作物保護用噴霧設備.有關組件的技術規范 |
(Spraying equipment for crop protection - Technical specifications related to components) |
| BS 6356-2-1985 |
農作物防護用噴霧設備.第2部分:噴嘴與壓力計的連接尺寸規范 |
(Spraying equipment for crop protection - Specification for connecting dimensions for nozzles and manometers) |
| BS 6356-3-1985 |
農作物防護用噴霧設備.第3部分:連接旋壓螺紋尺寸規范 |
(Spraying equipment for crop protection - Specification for dimensions of connection threading) |
| BS 6356-4-1989 |
農作物保護用噴霧設備.第4部分:田間噴嘴性能極限規范 |
(Spraying equipment for crop protection - Specification for performance limits for field spraying nozzles) |
| BS 6356-5-1992 |
農作物保護用噴霧設備.第5部分:藥罐公稱容積和注入孔直徑規范 |
(Spraying equipment for crop protection - Specification for tank nominal volume and filling hole diameter) |
| BS 6356-6-1992 |
農作物保護用噴霧設備.第6部分:有插接固定裝置噴嘴的連接尺寸規范 |
(Spraying equipment for crop protection - Specification for connecting dimensions for nozzles with bayonet fixing) |
| BS 6356-7-1993 |
農作物保護用噴霧設備.第7部分:典型數據表設計 |
(Spraying equipment for crop protection - Guide for typical data sheet layout) |
| BS 6356-8-1996 |
作物保護用噴霧設備.吸入裝料斗的規范 |
(Spraying equipment for crop protection - Specification for induction hoppers) |
| BS 6356-9-1996 |
農作物保護用噴霧設備.第9部分:液體組份封閉傳輸系統的規范 |
(Spraying equipment for crop protection - Specification for systems for closed transfer of liquid formulations) |
| BS 6359-1983 |
縮微平片標題涂層(彩色條)的尺寸和位置規范 |
(Specification for dimensions and position of microfiche heading coating (colour stripe)) |
| BS 6360-1991 |
絕緣電纜和軟線用導線規范 |
(Specification for conductors in insulated cables and cords) |
| BS 6361-1988 |
電氣控制液壓設備用三相插接件規范 |
(Specification for three-pin plug connectors for electrically controlled fluid power equipment) |
| BS 6362-1990 |
適用于按BS21壓密接合管及配件的螺紋進行攻絲的不銹鋼管規范 |
(Specification for stainless steel tubes suitable for screwing in accordance with BS 21 ’Pipe threads for tubes and fittings where pressure-tight joints are made on the threads’) |
| BS 6364-1984 |
制冷設備用閥規范 |
(Specification for valves for cryogenic service) |
| BS 6365-1983 |
精密深度游標卡尺規范 |
(Specification for precision vernier depth gauges) |
| BS 6366-1983 |
橄欖球靴用飾釘規范 |
(Specification for studs for rugby football boots) |
| BS 6368-1983 |
鐵氧體或鐵粉制造的軸向引線磁芯規范 |
(Specification for axial lead cores made of magnetic oxides or iron powder) |
| BS 6371-1983 |
未出版文獻的引文推薦規范 |
(Recommendations for citation of unpublished documents) |
| BS 6374-1-1985 |
加工工業用聚合材料制的設備襯套.第1部分:熱塑塑料片制的襯套規范 |
(Lining of equipment with polymeric materials for the process idustries - Specification for lining with sheet thermoplastics) |
| BS 6374-2-1984 |
加工工業用聚合材料制的設備襯套.第2部分:非熱塑性塑料片制的襯套規范 |
(Lining of equipment with polymeric materials for the process industries - Specification for lining with non-sheet applied thermoplastics) |
| BS 6374-3-1984 |
加工工業用聚合材料制的設備襯套.第3部分:烘干熱固性樹脂襯套規范 |
(Lining of equipment with polymeric materials for the process industries - Specification for lining with stoved thermosetting resins) |
| BS 6374-4-1984 |
加工工業用聚合材料制的設備襯套.第4部分:冷固化處理的熱固性樹脂制襯套規范 |
(Lining of equipment with polymeric materials for the process industries - Specification for lining with cold curing thermosetting resins) |
| BS 6374-5-1985 |
加工工業用聚合材料制的設備襯套.第5部分:橡膠制襯套規范 |
(Lining of equipment with polymeric materials for the process industries - Specification for lining with rubbers) |
| BS 6375-1-1989 |
窗的性能.第1部分:不透風雨度的分類(包括選擇和規范的指南) |
(Performance of windows - Classification for weathertightness (including guidance on selection and specification)) |
| BS 6375-1-2004 |
窗的性能.第1部分:不透風雨度的分類、選擇指南和規范 |
|
| BS 6375-1-2004 |
門窗的性能.防風雨性的分類、選擇指南和規范 |
|
| BS 6375-2-1987 |
窗的性能.開關和強度特性規范 |
(Performance of windows - Specification for operation and strength characteristics) |
| BS 6376-1-1983 |
化學分析試劑.第1部分:試驗方法 |
(Reagents for chemical analysis - Methods of test) |
| BS 6376-2-1984 |
化學分析試劑.第2部分:規范(第1系列) |
(Reagents for chemical analysis - Specifications (first series)) |
| BS 6376-3-1990 |
化學分析試劑.第3部分:規范(第2系列) |
(Reagents for chemical analysis - Specifications (second series)) |
| BS 6379-1-1983 |
咖啡和咖啡制品的取樣.第1部分:袋裝生咖啡豆的取樣方法 |
(Sampling of coffee and coffee products - Method of sampling green coffee in bags) |
| BS 6379-3-1983 |
咖啡和咖啡制品的取樣.第3部分:生咖啡豆取樣用咖啡豆取樣器規范 |
(Sampling of coffee and coffee products - Specification for a coffee trier for sampling green coffee) |
| BS 6379-4-1991 |
咖啡和咖啡制品的取樣.第4部分:感官分析用生咖啡豆的樣品制備方法 |
(Sampling of coffee and coffee products - Method for preparation of samples of green coffee for use in sensory analysis) |
| BS 638-4-1996 |
電弧焊用電源、設備和附件.電焊電纜規范 |
(Arc welding power sources, equipment and accessories - Specification for welding cables) |
| BS 6380-1997 |
符合BS EN 590和BS 2869 A2及D級的柴油燃料和氣體油的冷氣候使用及低溫性能導則 |
(Guide to low temperature properties and cold weather use of diesel fuels and gas oils conforming to BS EN 590 and classes A2 and D of BS 2869) |
| BS 6381-1983 |
制圖板規范 |
(Specification for drawing boards) |
| BS 6384-1983 |
農機車輛制動性能的測定方法 |
(Methods for determination of braking performance of agricultural and forestry vehicles) |
| BS 6385-1996 |
林業機械.絞車.性能要求 |
(Machinery for forestry - Winches - Performance requirements) |
| BS 6387-1994 |
在著火狀態下能保證電路工作的電纜的性能要求規范 |
(Specification for performance requirements for cables required to maintain circuit integrity under fire conditions) |
| BS 6388-1-1991 |
紙和紙板的加速老化.105℃時干熱處理法 |
(Accelerated ageing of paper and board - Method for dry heat treatment at 105 鳦) |
| BS 6388-2-1987 |
紙和紙板的加速老化.120℃或150℃時的干熱處理方法 |
(Accelerated ageing of paper and board - Method for dry heat treatment at 120 鳦 or 150 鳦) |
| BS 6388-3-1996 |
紙和紙板的加速老化.在80℃和65%相對濕度時的濕熱處理方法 |
(Accelerated ageing of paper and board - Method for moist heat treatment at 80 鳦 and 65% relative humidity) |
| BS 6389-1983 |
農業拖拉機駕駛員視野的測定方法 |
(Methods for determination of operator’s field of vision for agricultural tractors) |
| BS 6391-1983 |
滅火用不透水扁軟管與軟管導管規范 |
(Specification for non-percolating layflat delivery hoses and hose assemblies for fire fighting purposes) |
| BS 6392-0-1983 |
工業用乙醇試驗.第0部分:總則 |
(Testing of ethanol for industrial use - General introduction) |
| BS 6392-1-1983 |
工業用乙醇試驗.第1部分:堿度檢測或?qū)Ψ犹岫鹊臏y(cè)定方法 |
(Testing of ethanol for industrial use - Method for detection of alkalinity or determination of acidity to phenolphthalein) |
| BS 6392-2-1983 |
工業用乙醇試驗.第2部分:少量的羰基化合物含量的測定方法(光度法) |
(Testing of ethanol for industrial use - Method for determination of carbonyl compounds content present in small amounts (photometric method)) |
| BS 6392-3-1983 |
工業用乙醇試驗.第3部分:中等量的羰基化合物含量的測定方法 |
(滴定分析法(Testing of ethanol for industrial use - Method for determination of carbonyl compounds content present in moderate amounts (titrimetric method)) |
| BS 6392-4-1983 |
工業用乙醇試驗.第4部分:醛含量的測定方法 |
(Testing of ethanol for industrial use - Method for determination of aldehydes content) |
| BS 6392-5-1983 |
工業用乙醇試驗.第5部分:水混溶性試驗方法 |
(Testing of ethanol for industrial use - Method of test for miscibility with water) |
| BS 6392-6-1983 |
工業用乙醇試驗.甲醇含量[0.01%(V/V)至0.20%(V/V)]的測定方法(光度法) |
(Testing of ethanol for industrial use - Method for determination of methanol content [0.01% (V/V) to 0.20% (V/V)](photometric method)) |
| BS 6392-7-1983 |
工業用乙醇試驗.甲醇含量[0.10%(V/V)至1.50%(V/V)]的測定方法(目視比色法) |
(Testing of ethanol for industrial use - Method for determination of methanol content [0.10% (V/V) to 1.50% (V/V)] (visual colorimetric method)) |
| BS 6392-8-1983 |
工業用乙醇試驗.第8部分:酯含量的測定方法 |
(Testing of ethanol for industrial use - Method for determination of esters content) |
| BS 6392-9-1983 |
工業用乙醇試驗.第9部分:用高錳酸鹽退色時間的方法來測定乙醇含量 |
(Testing of ethanol for industrial use - Method for determination of permanganate time) |
| BS 6393-1987 |
表面結構測量用探針式儀器規范 |
(Specification for calibration of stylus instruments) |
| BS 6394-1-1983 |
乳和乳制品中的微量素.第1部分:銅含量的測定方法(參考法) |
(Trace elements in milk and milk products - Method for the determination of copper content (reference method)) |
| BS 6394-2-1985 |
乳和乳制品中的微量素.第2部分:鐵含量的測定方法(參考法) |
(Trace elements in milk and milk products - Method for the determination of iron content (reference method)) |
| BS 6395-1983 |
目測織物疵點記數方法 |
(Method for numerical designation of fabric faults by visual inspection) |
| BS 6396-2002 |
辦公室家具和辦公室屏幕的電器系統規范 |
(Electrical systems in office furniture and office screens - Specification) |
| BS 6397-1983 |
繪制頻率特性和極坐標圖用標度和尺寸規范 |
(Specification for scales and sizes for plotting frequency characteristics and polar diagrams) |
| BS 6398-1983 |
磚石瀝青砌鋪防潮層規范 |
(Specification for bitumen damp-proof courses for masonry) |
| BS 6399-1-1996 |
建筑物的負荷設計.自重和加載實用規程 |
(Loading for buildings - Code of practice for dead and imposed loads) |
| BS 6399-2-1997 |
建筑物的負荷設計.風荷載實施規程 |
(Loading for buildings - Code of practice for wind loads) |
| BS 6399-3-1988 |
建筑物的負荷設計.第3部分:屋頂加載實用指南 |
(Loading for buildings - Code of practice for imposed roof loads) |
| BS 64-1992 |
鐵路魚尾板用的標準和高強度鋼螺栓和螺母規范 |
(Specification for normal and high strength steel bolts and nuts for railway rail fishplates) |
| BS 6400-1-2002 |
最大額定容量不超過 6m |
(Specification for installation of domestic-sized gas meters maximum rated capacity not exceeding 6 mUP3/h (2nd and 3rd family gases) - Low pressure (2nd family gases)) |
| BS 6401-1983 |
材料發出煙霧的光學比密度的實驗室測量方法 |
(Method for measurement, in the laboratory, of the specific optical density of smoke generated by materials) |
| BS 6403-1983 |
與英國用戶電報通信網連接使用單通道音頻的簡易用戶電報終端規范 |
(Specification for simple telex terminals using single channel voice frequency signalling for connection to British Telecommunications telex network) |
| BS 6404-12-1993 |
磁性材料.第12部分:層間隔熱涂層保溫性能的評定方法指南 |
(Magnetic materials - Guide to methods of assessment of temperature capability of interlaminar insulation coatings) |
| BS 6404-13-1996 |
磁性材料.第13部分:帶電的帶鋼和鋼板的密度、電阻率和疊層系數的測量方法 |
(Magnetic materials - Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip) |
| BS 6404-20-1996 |
磁性材料.第20部分:絕緣覆層的電阻和溫度的分類 |
(Magnetic materials - Resistance and temperature classification of insulation coatings) |
| BS 6404-8.1-2001 |
磁性材料.特定材料.硬磁性材料 |
(Magnetic materials - Individual materials - Magnetically hard materials) |
| BS 6404-8.6-1989 |
磁性材料.第8部分:特定材料.第6節:軟磁性金屬材料 |
(Magnetic materials - Individual materials - Specification for soft magnetic metallic materials) |
| BS 6405-1984 |
一般工程用非校準的短節鋼鏈(品級30)規范:1類與2類 |
(Specification for non-calibrated short link steel chain (grade 30) for general engineering purposes: class 1 and 2) |
| BS 6407-1-1983 |
零售用柜式托盤.第1部分:300Kg承載力的可拆疊式柜平托盤規范 |
(Cage pallets for retail use - Specification for collapsible cage pallets rated at 300 kg) |
| BS 6407-2-1984 |
零售用柜式托盤.第2部分:300Kg承載力的可折疊柜式平托盤安全儲運 |
(Cage pallets for retail use - Guide to the safe handling and use of collapsible cage pallets rated at 300 kg) |
| BS 6408-1983 |
涂層織物制的雨衣規范 |
(Specification for clothing made from coated fabrics for protection against wet weather) |
| BS 641-1951 |
通用小鉚釘尺寸 |
(Dimensions of small rivets for general purposes) |
| BS 6410-1991 |
濾紙的試驗方法 |
(Methods of test for filter papers) |
| BS 6413-2-1983 |
潤滑油、工業用油和有關產品(L級).第2部分:系列F 的分類(立軸軸承、軸承和聯合離合器) |
(Lubricants, industrial oils and related products (class L) - Classification for family F (spindle bearings, bearings and associated clutches)) |
| BS 6413-3.1-1988 |
潤滑油、工業用油和有關產品(L級).第3部分:系列D的分類(壓縮機).第1節:空氣壓縮機 |
(Lubricants, industrial oils and related products (class L) - Classification for family D (compressors) - Air compressors) |
| BS 6413-3.2-1989 |
潤滑油、工業用油和有關產品(L級).第3部分:系列D的分類(壓縮機).第2節:氣體和制冷壓縮機 |
(Lubricants, industrial oils and related products (class L) - Classification for family D (compressors) - Gas and refrigeration compressors) |
| BS 6413-5-1988 |
潤滑油、工業用油和有關產品(L級).第5部分:系列T的分類(渦輪) |
(Lubricants, industrial oils and related products (class L) - Classification for family T (turbines)) |
| BS 6413-6-1991 |
潤滑油、工業用油和有關產品(L類).C系列(齒輪)用分類 |
(Lubricants, industrial oils and related products (class L) - Classification for family C (gears)) |
| BS 6413-7-1988 |
潤滑油、工業用油和有關產品(L級).第7部分:系列M的分類( 金屬加工) |
(Lubricants, industrial oils and related products (class L) - Classification for family M (metalworking)) |
| BS 6413-8-1988 |
潤滑油、工業用油和有關產品(L級).第8部分:系列R的分類(暫時防腐保護) |
(Lubricants, industrial oils and related products (class L) - Classification for family R (temporary protection against corrosion)) |
| BS 6413-9-1988 |
潤滑油、工業用油和有關產品(L級).第9部分:系列X的分類(潤滑脂) |
(Lubricants, industrial oils and related products (class L) - Classification for family X (greases)) |
| BS 6414-1983 |
振動和沖擊隔振器的性能規定方法 |
(Method for specifying characteristics of vibration and shock isolators) |
| BS 6416-1983 |
螺母與螺釘?shù)难b配工具術語詞匯 |
(Nomenclature for assembly tools for screws and nuts) |
| BS 6419-1983 |
土方機械牽引桿拉力的測量方法 |
(Method for measurement of drawbar pull of earth-moving machinery) |
| BS 6422-1983 |
土方工程用裝載機和前裝載挖土機鏟斗容積的測定方法 |
(Method for volumetric rating of loader and front loading excavator buckets used for earth-moving) |
| BS 6423-1983 |
電壓小于和等于 650V的電氣開關設備和控制裝置維修實用規范 |
(Code of practice for maintenance of electrical switchgear and controlgear for voltages up to and including 1 kV) |
| BS 6429-1989 |
BS4730(ISO646)和BS6692Pt.2(ISO6937-2)與CCITT國際電報No.2(ITA2)字母兩種編碼字符集之間的變換方法 |
(Method for conversion between the two coded character sets of BS 4730 (ISO 646) and BS 6692:Part 2 (ISO 6937-2) and the CCITT international telegraph alphabet No. 2 (ITA 2)) |
| BS 643-1970 |
澆制鋼絲繩端頭用白色合金錠規范 |
(Specification for white metal ingots for capping steel wire ropes) |
| BS 6431-1-1983 |
地面瓷磚和墻面瓷磚.第1部分:分類和標記:包括定義和特性規范 |
(Ceramic floor and wall tiles - Specification for classification and marking, including definitions and characteristics) |
| BS 6431-13-1986 |
地面瓷磚和墻面瓷磚.第13部分:按莫氏測定表面擦痕硬度的方法 |
(Ceramic floor and wall tiles - Method for determination of scratch hardness of surface according to Mohs) |
| BS 6431-1984 |
地面瓷磚和墻面瓷磚.第19部分:耐化學腐蝕性能的測定方法.釉面磚 |
(Ceramic floor and wall tiles. Method for determination of chemical resistance. Glazed tiles) |
| BS 6431-2-1984 |
地面瓷磚和墻面瓷磚.第2部分:低吸水率(E 小于或和等于3%)的擠壓成形瓷磚規范.A1類 |
(Ceramic floor and wall tiles - Specification for extruded ceramic tiles with a low water absorption (E) |
| BS 6431-3.1-1986 |
地面瓷磚和墻面瓷磚.吸水率E大于3%、小于或等于6%的擠壓成型瓷磚規范.A11a類.一般產品規范 |
(Ceramic floor and wall tiles - Extruded ceramic tiles with a water absorption of 3%) |
| BS 6431-3.2-1986 |
地面瓷磚和墻面瓷磚.吸水率E大于3%、小于或等于6%的擠壓成型瓷磚規范.A11a類.產品(法國的和比利時的terre c |
(Ceramic floor and wall tiles - Extruded ceramic tiles with a water absorption of 3%) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com