標準號 |
中文名稱 |
英文名稱 |
| BS 2S 143-1976 |
鉻-鎳-銅-鉬抗腐蝕鋼(沉淀硬化)坯,棒,鍛件和部件(930-1080MPa)規范 |
(Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel (precipitation hardening) billets, bars, forgings and parts(930-1080 MPa)) |
| BS 2S 146-1976 |
含4%鎳-鉻-鉬空冷淬硬鋼(真空電弧重熔)方坯、棒材、鍛件及零件規范(1760-1960MPa;限定等圓斷面100mm) |
(Specification for 4% nickel-chromium-molybdenum air-hardening steel (vacuum arc remelted) billets, bars, forgings and parts (1760-1960 MPa: limiting ruling section 100 mm)) |
| BS 2S 147-1976 |
制造螺栓、螺母用的含0.5%鎳-鉻-鉬鋼棒規范 |
(Specification for 0.5% nickel-chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts) |
| BS 2S 149-1976 |
鍛制螺栓和螺母用的含1.75%鎳-鉻-鉬鋼棒規范 |
(Specification for 1.75% nickel-chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts) |
| BS 2S 201-2004 |
碳鋼線材、鉛淬火冷拉碳鋼絲和彈簧.高負載的不接地線.規范 |
|
| BS 2S 201-2004 |
碳鋼線材、鉛淬火冷拉碳鋼絲和彈簧.高負載的不接地線.規范 |
|
| BS 2S 510-1970 |
碳鋼薄板和帶材規范(430/540 MPa)(適用于焊接) |
(Specification for carbon steel sheet and strip (430/540 MPa) (suitable for welding)) |
| BS 2S 511-1970 |
深拉碳薄鋼板和帶材的規范(280/400 MPa)(適用于焊接) |
(Specification for deep drawing carbon steel sheet and strip (280/400 MPa) (suitable for welding)) |
| BS 2S 513-1970 |
彈簧鋼帶材規范 |
(Specification for spring steel strip) |
| BS 2S 514-1969 |
碳錳鋼薄板和帶材規范(淬火和回火條件:77/100MPa)(適用于焊接) |
(Specification for carbon-manganese steel sheet and strip (for use in the hardened and tempered condition: 770/1000 MPa) (suitable for welding)) |
| BS 2S 515-1969 |
碳錳鋼薄板和帶材規范(退火的)(退火條件:46/59MPa)(適用于焊接) |
(Specification for carbon-manganese steel sheet and strip (softened) (for use in the softened condition: 460/600 MPa) (suitable for welding)) |
| BS 2S 92-1964 |
航空材料規范.碳錳鋼(適用于焊接)(40/55噸力/平方英寸;限定等圓斷面4英寸) |
(Specification for aircraft material - Carbon-manganese steel (suitable for welding) (40/55 tonf/sq in: limiting ruling section 4 in)) |
| BS 2S 93-1964 |
航空材料規范.40號鋼碳(正火的)(35/45噸力/平方英寸;限定等圓斷面6英寸) |
(Specification for aircraft material - ’40’ carbon steel (normalized) (35/45 tonf/sq in: limiting ruling section 6 in)) |
| BS 2S 97-1964 |
航空材料規范.每百含2 |
(Specification for aircraft material - 2) |
| BS 2S 98-1964 |
航空材料規范.每百含2 |
(Specification for aircraft material - 2) |
| BS 2SP 1-1927 |
航空材料規范.鉤環 |
(Specification for aircraft material - Shackles) |
| BS 2SP 101-104-1956 |
航空用旋轉套筒、張力傳動桿和鍛壓鋼絲繩末端接頭(統一螺紋)規范 |
(Specifications for turnbarrels, tension rods and swaged cable-end connections (Unified threads) for aircraft) |
| BS 2SP 105-1955 |
航空用預成型鋼絲繩(W9)的鍛壓鋼絲繩端組件(統一螺紋)規范 |
(Specification for swaged cable-end assemblies (Unified threads) for preformed steel wire rope (W.9) for aircraft) |
| BS 2SP 106-1955 |
航空用預成型不腐蝕鋼絲繩(W.11)的鍛壓鋼絲繩端組件(統一螺紋)規范 |
(Specification for swaged cable-end assemblies (Unified threads) for preformed non-corrodible steel wire rope (W.11) for aircraft) |
| BS 2SP 142 and SP 143-1973 |
按BS L 86(SP 142)和BS L 37(SP 143)材料制成的截成圓角的100°埋頭整體鉚釘規范 |
(Specification for solid rivets with 100 ?countersunk truncated radiused head made from BS L 86 (SP 142) and BS L 37 (SP 143) materials) |
| BS 2SP 148-150-1979 |
鋁合金統一墊圈規范 |
(Specification for Unified aluminium alloy washers) |
| BS 2SP 151-153-1979 |
合金鋼統一墊圈規范 |
(Specification for Unified alloy steel washers) |
| BS 2SP 154-156-1979 |
耐腐蝕鋼統一墊圈規范 |
(Specification for Unified corrosion-resistant steel washers) |
| BS 2SP 157-163-1973 |
根據BS L 86(SP 157和163)、BS L 58(SP 160-161)、BS L 37(SP 162)和DTD 204(SP 158-159)材料制成的有通用 |
(Specification for solid rivets with universal head made from BS L 86 (SP 157 and 163), BS L 58 (SP 160 and 161), BS L 37 (SP 162) and DTD 204 (SP 158 and 159) materials) |
| BS 2SP 47-1957 |
航空用單盤簧墊圈 |
(Single coil spring washers for aircraft) |
| BS 2SP 7-1943 |
航空材料規范.叉形接頭(高強度型)(尺寸自4B.A.至) |
(Specification for aircraft material - Fork joints (high tensile type) (for sizes No. 4 B.A. to) |
| BS 2SP 77 to 2SP 80-1973 |
圓頭形鋁和鋁合金鉚釘規范 |
(Specification for snap head aluminium and aluminium alloy rivets) |
| BS 2SP 81 and 2SP 82-1973 |
圓頭形高鎳銅合金鉚釘規范 |
(Specification for snap head high nickel-copper alloy rivets) |
| BS 2SP 83 to 85-1973 |
蘑菇頭鋁合金鉚釘規范 |
(Specification for mushroom head aluminium alloy rivets) |
| BS 2SP 87 and 2SP 88-1973 |
100°埋頭高鎳銅合金鉚釘規范 |
(Specification for 100 ?countersunk head high nickel-copper alloy rivets) |
| BS 2SP 91-92-1973 |
航空用碳素鋼蝸桿傳動夾子規范 |
(Specification for carbon steel worm drive clamps for aircraft) |
| BS 2SP 93-1974 |
航空航天用彈性保護墊圈(丙烯腈-丁二烯)規范 |
(Specification for elastomeric grommets (acrylonitrile-butadiene) for aerospace use) |
| BS 2SP 95-1974 |
航空航天用彈性保護墊圈(聚氯丁)規范 |
(Specification for elastomeric grommets (polychloroprene) for aerospace use) |
| BS 2SP 96-1982 |
內卡環(英制尺寸)規范 |
(Specification for internal retaining rings (imperial sizes)) |
| BS 2T 57-1972 |
4/1鎳-鉻鋼管規范 |
(1150 N/mm(Specification for 4/1 nickel-chromium steel tube (1150 N/mmUP2)) |
| BS 2T 66-1980 |
19/10鉻-鎳耐腐蝕鋼管規范(鈮穩定的:550MPa)(可焊接) |
(Specification for 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 550 MPa) (weldable)) |
| BS 2T 68-1980 |
冷拔18/10鉻-鎳耐腐蝕鋼管規范(鈮穩定的:800MPa)(可焊接) |
(Specification for cold drawn 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 800 MPa) (weldable)) |
| BS 2TA 1-1974 |
商用純鈦板材和帶材規范(抗拉強度290-420MPa) |
(Specification for sheet and strip of commercially pure titanium (tensile strength 290-420 MPa)) |
| BS 2TA 10-1974 |
鈦鋁釩合金板材規范(抗拉強度960-1270MPa) |
(Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 960-1270 MPa)) |
| BS 2TA 100-1973 |
鍛造鈦和鈦合金的檢驗和試驗規程 |
(Procedure for inspection and testing of wrought titanium and titanium alloys) |
| BS 2TA 11-1974 |
鈦鋁釩合金機加工棒材和型材規范(抗拉強度900-1160MPa)(限定等圓斷面150mm) |
(Specification for bar and section for machining of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm)) |
| BS 2TA 12-1974 |
鈦鋁釩合金鍛坯規范(抗拉強度900-1160MPa)(限定等圓斷面150mm) |
(Specification for forging stock of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm)) |
| BS 2TA 13-1974 |
鈦鋁釩合金鍛件規范(抗拉強度900-1160MPa)(限定等圓斷面150mm) |
(Specification for forgings of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm)) |
| BS 2TA 2-1973 |
商用純鈦板材和帶材規范 |
(抗拉強度390-540 N/mm(Specification for sheet and strip of commercially pure titanium (tensile strength 390-540 N/mmUP2)) |
| BS 2TA 21-1973 |
鈦銅合金板材和帶材規范(抗拉強度540-700MPa) |
(Specification for sheet and strip of titanium-copper alloy (tensile strength 540-700 MPa)) |
| BS 2TA 22-1973 |
鈦銅合金棒材和型材規范 |
(抗拉強度540-770 N/mm(Specification for bar and section for machining of titanium-copper alloy (tensile strength 540-770 N/mmUP2)) |
| BS 2TA 23-1973 |
鈦銅合金鍛坯規范 |
(抗拉強度540-770 N/mm(Specification for forging stock of titanium-copper alloy (tensile strength 540-770 N/mmUP2)) |
| BS 2TA 24-1973 |
鈦銅合金鍛件規范 |
(抗拉強度540-770 N/mm(Specification for forgings of titanium-copper alloy (tensile strength 540-770 N/mmUP2)) |
| BS 2TA 28-1974 |
鈦鋁釩合金鍛坯和線材規范(抗拉強度1100-1300MPa)(限定等圓斷面20mm)(主要供符合英國標準A系列要求的緊固件 |
() |
| BS 2TA 3-1973 |
商用機加工純鈦棒材和型材規范 |
(抗拉強度390-540 N/mm(Specification for bar and section for machining of commercially pure titanium (tensile strength 390-540 N/mmUP2)) |
| BS 2TA 4-1973 |
商用純鈦鍛造坯料規范 |
(抗拉強度390-540 N/mm(Specification for forging stock of commercially pure titanium (tensile strength 390-540 N/mmUP2)) |
| BS 2TA 5-1973 |
商用純鈦鍛件規范 |
(抗拉強度390-540 N/mm(Specification for forgings of commercially pure titanium (tensile strength 390-540 N/mmUP2)) |
| BS 2TA 6-1973 |
商用純鈦板材和帶材規范 |
(抗拉強度570-730 N/mm(Specification for sheet and strip of commercially pure titanium (tensile strength 570-730 N/mmUP2)) |
| BS 2TA 7-1973 |
商用純鈦機加工棒材和型材規范 |
(抗拉強度540-740 N/mm(Specification for bar and section for machining of commercially pure titanium (tensile strength 540-740 N/mmUP2)) |
| BS 2TA 8-1973 |
商用純鈦鍛造坯料規范 |
(抗拉強度540-740 N/mm(Specification for forging stock of commercially pure titanium (tensile strength 540-740 N/mmUP2)) |
| BS 2TA 9-1973 |
商用純鈦鍛件規范 |
(抗拉強度540-740 N/mm(Specification for forgings of commercially pure titanium (tensile strength 540-740 N/mmUP2)) |
| BS 2V 35-1966 |
航空用膠合板規范 |
(Specification for plywood for aeronautical purposes) |
| BS 2V 37-1968 |
精加工過的西加方杉木材規范 |
(Specification for Sitka spruce as finished timber) |
| BS 2W 11-1967 |
航空用材料規范.預制耐腐蝕鋼絲繩 |
(Specification for aircraft material - Preformed corrosion-resisting steel wire rope) |
| BS 2W 12-1989 |
預制鍍鋅碳素鋼絲繩規范(米制和英制系列) |
(Specification for preformed zinc coated carbon steel wire rope (metric and inch series)) |
| BS 2X 26-2001 |
覆蓋飛機的織物的涂布和精整 |
(Doping and finishing schemes for fabric covered aircraft) |
| BS 2X 27-1991 |
航空航天用纖維素表面光飾方案規范 |
(Specification for cellulose finishing scheme for aerospace purposes) |
| BS 2X 32-1998 |
空間飛行目的用預處理蝕刻油漆膩子的規范 |
(Specification for pre-treatment etch primer for aerospace purposes) |
| BS 2X 33-1998 |
航空航天用的兩組份環氧膩子規范 |
(Specification for two component epoxy primer for aerospace purposes) |
| BS 2X 34-1998 |
空間飛行目的用的兩組份的聚氨酯精整規范 |
(Specification for two component polyurethane finish for aerospace purposes) |
| BS 2X 35-2003 |
航空航天用選擇性可除去的中間涂層 |
(Selectively removable intermediate coating for aerospace purposes) |
| BS 3012-1970 |
普通低密度與中密度聚乙烯板規范 |
(Specification for low and intermediate density polythene sheet for general purposes) |
| BS 3015-1991 |
機械振動與沖擊的名詞術語匯編 |
(Glossary of terms relating to mechanical vibration and shock) |
| BS 302-3-1987 |
絞合鋼絲繩.第3部分:船用鍍鋅鋼絲繩規范 |
(Stranded steel wire ropes - Specification for zinc coated ropes for ships) |
| BS 302-5-1987 |
絞合鋼絲繩.第5部分:牽引用鋼絲繩規范 |
(Stranded steel wire ropes - Specification for ropes for hauling purposes) |
| BS 302-6-1987 |
絞合鋼絲繩.第6部分:礦井提升用鋼絲繩規范 |
(Stranded steel wire ropes - Specification for ropes for mine hoisting) |
| BS 302-7-1989 |
絞合鋼絲繩.第7部分:通用大直徑鋼絲繩規范 |
(Stranded steel wire ropes - Specification for large diameter ropes for general purposes) |
| BS 302-8-1989 |
絞合鋼絲繩.第8部分:高斷裂荷載鋼絲繩規范 |
(Stranded steel wire ropes - Specification for higher breaking load ropes) |
| BS 303-1991 |
涂料用鉛鉻綠顏料規范 |
(Specification for lead chrome green pigments for paints) |
| BS 3031-1996 |
鉛酸蓄電池用硫酸規范 |
(Specification for sulfuric acid used in lead-acid batteries) |
| BS 3036-1958 |
半封閉式熔斷器(額定電流 100A及以下.接地電壓240V)規范 |
(Specification - Semi-enclosed electric fuses (ratings up to 100 amperes and 240 volts to earth)) |
| BS 3037-1-1958 |
起重機軌輪用輪箍規范.第1部分:雙法蘭平行輪距輪箍 |
(Specification for tyres for crane rail wheels - Double-flanged parallel-tread tyres) |
| BS 3037-2-1975 |
起重機軌輪用輪箍規范.第2部分:鍛制或軋制雙法蘭鋼軌輪與鋼輪箍(米制單位)規范 |
(Specification for tyres for crane rail wheels - Forged or rolled steel double flanged rail wheels and tyres (metric units)) |
| BS 3041-1-1977 |
射頻連接器.第1部分:一般要求與測量方法規范 |
(Radio-frequency connectors - Specification for general requirements and measuring methods) |
| BS 3041-12-1981 |
射頻連接器.第12部分:螺紋連接、非匹配的(超高頻型)射頻同軸連接器規范 |
(Radio-frequency connectors - Specification for r.f. coaxial connectors with screw coupling, unmatched (type UHF)) |
| BS 3041-2-1977 |
射頻連接器.第2部分:同軸非匹配連接器規范 |
(Radio-frequency connectors - Specification for coaxial unmatched connector) |
| BS 3041-7-1996 |
射頻連接器.第7部分:有卡口鎖的內徑為9,5mm(o.374 in)的輸出導電體的射頻同軸連接器 |
(Radio-frequency connectors - R.F. coaxial connectors with inner diameter of output conductor 9,5 mm (0,374 in) with bayonet lock - Characteristic impedance 50 ohms (Type C)) |
| BS 3043-1973 |
醫療放射照相已沖洗的X射線膠片的儲存袋規范 |
(Specification for storage envelopes for processed X-ray films for medical radiography) |
| BS 3044-1991 |
辦公室用家具的設計和選擇中人類工效學原則指南 |
(Guide to ergonomics principles in the design and selection of office furniture) |
| BS 3046-1981 |
懸掛式軟墻面裝飾層膠粘劑規范 |
(Specification for adhesives for hanging flexible wallcoverings) |
| BS 3047-1988 |
廣告畫的尺寸規范 |
(Specification for sizes of posters) |
| BS 3048-1958 |
煙道氣體連續取樣與自動分析規程.指示器與記錄儀 |
(Code for the continuous sampling and automatic analysis of flue gases: indicators and recorders) |
| BS 3054-1959 |
消防員用橡膠絕緣把斧頭規范 |
(Specification for fireman’s axe with rubber insulated handle) |
| BS 3056-1-1985 |
耐火磚的尺寸.第1部分:多用途耐火磚規范 |
(Sizes of refractory bricks - Specification for multi-purpose bricks) |
| BS 3056-2-1985 |
耐火磚的尺寸.第2部分:玻璃熔爐用耐火磚規范 |
(Sizes of refractory bricks - Specification for bricks for use in glass-melting furnaces) |
| BS 3056-3-1986 |
耐火磚的尺寸.第3部分:旋轉水泥窯用耐火磚規范 |
(Sizes of refractory bricks - Specification for bricks for rotary cement kilns) |
| BS 3056-4-1985 |
耐火磚的尺寸.第4部分:電弧爐頂用耐火磚規范 |
Sizes of refractory bricks - Specification for bricks for electric arc furnace roofs |
| BS 3056-7-1992 |
耐火磚的尺寸.第7部分:煉鋼用堿性磚規范 |
(Sizes of refractory bricks - Specification for basic bricks for steel making) |
| BS 3056-8-1987 |
耐火磚的尺寸.第8部分:鋼鐵水包用磚規范 |
Sizes of refractory bricks - Specification for bricks for ladles |
| BS 3062-1985 |
眼鏡鏡片材料規范 |
Specification for ophthalmic lens materials |
| BS 3063-1965 |
管法蘭襯墊尺寸規范 |
Specification for dimensions of gaskets for pipe flanges |
| BS 3064-1978 |
米制正弦規與正弦臺(組合工作臺除外)規范 |
Specification for metric sine bars and sine tables (excluding compound tables) |
| BS 3065-2001 |
電阻焊.電阻焊設備.機械和電要求 |
(Resistance welding - Resistance welding equipment - Mechanical and electrical requirements) |
| BS 3066-1995 |
工程用冷鑿及相關用途工具規范 |
(Specification for engineers’ cold chisels and allied tools) |
| BS 3071-1986 |
鎳銅合金鑄件規范 |
(Specification for nickel-copper alloy castings) |
| BS 3072-1990 |
鎳與鎳合金規范:薄板材和中厚板材 |
(Specification for nickel and nickel alloys: sheet and plate) |
| BS 3073-1977 |
鎳和鎳合金帶材規范 |
(Specification for nickel and nickel alloys: strip) |
| BS 3074-1990 |
鎳與鎳合金無縫管規范 |
(Specification for nickel and nickel alloys: seamless tube) |
| BS 3075-1976 |
鎳與鎳合金線材規范 |
(Specification for nickel and nickel alloys: wire) |
| BS 3076-1990 |
鎳與鎳合金棒材規范 |
(Specification for nickel and nickel alloys: bar) |
| BS 3083-1988 |
普通熱浸涂鋅和熱浸涂鋁鋅波紋鋼板規范 |
(Specification for hot-dip zinc coated and hot-dip aluminium/zinc coated corrugated steel sheets for general purposes) |
| BS 3084-1992 |
拉鏈規范 |
(Specification for slide fasteners) |
| BS 3087-1-1991 |
夾扭鉗與剪斷鉗.第1部分:緒論 |
(Pliers and nippers - General introduction) |
| BS 3087-10-1991 |
夾扭鉗和剪斷鉗.第10部分:非ISO標準化工具尺寸規范 |
(Pliers and nippers - Specification for dimensions of tools not standardized by ISO) |
| BS 3087-11-1991 |
夾扭鉗和剪斷鉗.第11部分:伸縮結合式剪斷鉗的尺寸和試用值規范 |
(Pliers and nippers - Specification for dimensions and test values of slip joint pliers) |
| BS 3087-12-1991 |
夾扭鉗和剪斷鉗.第12部分:工人用夾鉗尺寸和結構試用值規范 |
(Pliers and nippers - Specification for dimensions and test values of construction worker’s pincers) |
| BS 3087-13-1991 |
夾扭鉗和剪斷鉗.第13部分:木工用夾鉗尺寸和試用值規范 |
Pliers and nippers - Specification for dimensions and test values of carpenter`s pincers |
| BS 3087-14-1991 |
夾扭鉗和剪斷鉗.第14部分:多用途滑動點夾扭鉗尺寸和試用值規范 |
(Pliers and nippers - Specification for dimensions and test values of multiple slip joint pliers) |
| BS 3087-2-1986 |
夾扭鉗與剪斷鉗.第2部分:術語 |
(Pliers and nippers - Nomenclature) |
| BS 3087-3-1986 |
夾扭鉗和剪斷鉗.第3部分:一般要求規范 |
(Pliers and nippers - Specification for general requirements) |
| BS 3087-4-1988 |
夾扭鉗和剪斷鉗.第4部分:試驗方法 |
(Pliers and nippers - Methods of test) |
| BS 3087-5-1986 |
夾扭鉗和剪斷鉗.第5部分:抓取與操縱用鉗子尺寸規范 |
(Pliers and nippers - Specification for dimensions of pliers for gripping and manipulating) |
| BS 3087-6-1986 |
夾扭鉗和剪斷鉗.第6部分:工程技術人員和養路工人用鉗子的尺寸規范 |
(Pliers and nippers - Specification for dimensions of engineers and lineman’s pliers) |
| BS 3087-7-1996 |
老虎鉗和剪斷鉗.第7部分:杠桿式旁剪鉗、中心剪絲鉗和斜嘴鉗尺寸規范 |
(Pliers and nippers - Specification for dimensions of lever assisted side cutting pliers, end and diagonal cutting nippers) |
| BS 3087-8-1986 |
夾扭鉗和剪斷鉗.第8部分:中心剪絲鉗尺寸規范 |
(Pliers and nippers - Specification for dimensions of end cutting nippers) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com