標準號 |
中文名稱 |
英文名稱 |
| BS 4839-2-1974 |
吹塑聚烯烴容器規范.第2部分:容量大于5L和小于60L的容器 |
(Plastics containers - Containers over 5 litres and up to 60 litres capacity) |
| BS 4840-1-1985 |
硬聚氨脂(PUR)泡沫塑料塊.第1部分:運輸容器和絕緣運輸車身用聚氨脂(PUR)泡沫塑料規范 |
(Rigid polyurethane (PUR) foam in slab form - Specification for PUR foam for use in transport containers and insulated vehicle bodies) |
| BS 4840-2-1994 |
硬聚氨基(PUR)泡沫塑料塊.冷藏箱、冷藏室及冷庫用聚氨脂泡沫塑料規范 |
(Rigid polyurethane (PUR) foam in slab form - Specification for PUR foam for use in refrigerator cabinets, cold rooms and stores) |
| BS 4841-1-1993 |
建筑用聚氨酯(PUR)和聚異氰尿酸酯(PIR)泡沫.第1部分:一般用途層壓板 |
(Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam for building applications - Specification for laminated board for general purposes) |
| BS 4841-2-1975 |
建筑用硬氨酯泡沫塑料規范.第2部分:用作墻和頂棚隔層的層壓板 |
(Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam for building applications - Laminated board for use as a wall and ceiling insulation) |
| BS 4841-3-1994 |
建筑用硬氨酯泡沫塑料規范.第3部分:組合屋頂?shù)捻敯甯魺嵊脦ё詣?dòng)粘附增強飾面的兩種層壓板(屋頂板) |
(Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam for building applications - Specification for two types of laminated board (roofboards) with auto-adhesively bonded reinforcing facings for use) |
| BS 4842-1984 |
外部建筑和液態有機涂覆的板材及預成型鋁合金擠壓件精整用板材和預成型鋁合金擠壓件液態有機涂層的規范 |
() |
| BS 4845-1-1972 |
50kg-5000kg小發貨重量的散裝或袋裝家用人造無煙固體燃料的取樣方法.第1部分:焦炭的取樣 |
(Methods for sampling manufactured domestic solid smokeless fuels in small consignments of mass 50 kg to 5000 kg either in bulk or in bags - Sampling of coke) |
| BS 4845-2-1979 |
50kg-5000kg小發貨重量的散裝或袋裝家用人選無煙固體燃料的取樣方法.第2部分:固體無煙燃料(除焦炭外)的取樣 |
(Methods for sampling manufactured domestic solid smokeless fuels in small consignments of mass 50 kg to 5000 kg either in bulk or in bags - Sampling of solid smokeless fuels other than coke) |
| BS 4847-1989 |
聲錄放設備速度波動的測量方法 |
(Method of measurement of speed fluctuations in sound recording and reproducing equipment) |
| BS 4854-1972 |
礦用乘人車規范 |
(Specification for cars for manriding in mines) |
| BS 4856-1-1972 |
風機盤管供暖裝置、單供熱器和單供冷器的試驗和評定方法.第1部分:加熱負荷的熱性能及體積特性;無附加導 |
(Methods for testing and rating fan coil units, unit heaters and unit coolers - Thermal and volumetric performance for heating duties; without additional ducting) |
| BS 4856-2-1975 |
風機盤管供暖裝置,單供熱器和單供冷器的試驗和評定方法.第2部分:冷卻負荷的熱性能及體積特性.無附加導 |
(Methods for testing and rating fan coil units, unit heaters and unit coolers - Thermal and volumetric performance for cooling duties: without additional ducting) |
| BS 4856-3-1975 |
風機盤管供暖裝置,單供熱器和單供冷器的試驗和評定方法.第3部分:加熱與冷卻負荷的熱性能及體積特性;有 |
(Methods for testing and rating fan coil units, unit heaters and unit coolers - Thermal and volumetric performance for heating and cooling duties; with additional ducting) |
| BS 4856-4-1997 |
風機盤管供暖裝置、單供熱器和單供冷器的試驗和評定方法.第4部分:使用混響室對風機盤管供暖裝置、單 |
(Methods for testing and rating fan coil units, unit heaters and unit coolers - Determination of sound power levels of fan coil units, unit heaters and unit coolers using reverberating rooms) |
| BS 4857-1-1972 |
空氣分配系統的終端再熱裝置的試驗與評定方法.第1部分:熱性能及空氣動力學特性 |
(Methods for testing and rating terminal reheat units for air distribution systems - Thermal and aerodynamic performance) |
| BS 4857-2-1978 |
空氣分配系統的終端再熱裝置的試驗與評定方法.第2部分:聲學試驗和評定 |
(Methods for testing and rating terminal reheat units for air distribution systems - Acoustic testing and rating) |
| BS 4859-1989 |
聚烯烴絲紡織品試驗方法 |
(Methods for test for fabrics produced from polyolefin tape yarns) |
| BS 4868-1972 |
建筑用成型薄鋁板規范 |
(Specification for profiled aluminium sheet for building) |
| BS 4871-3-1985 |
按認可焊接工藝操作的焊工鑒定考試規范.第3部分:金屬管與管板接頭之間的電弧焊 |
(Specification for approval testing of welders working to approved welding procedures - Arc welding of tube to tube-plate joints in metallic materials) |
| BS 4872-1-1982 |
焊接工藝不需認可時焊工的鑒定考試規范.第1部分:鋼的熔焊 |
(Specification for approval testing of welders when welding procedure approval is not required - Fusion welding of steel) |
| BS 4872-2-1976 |
焊接工藝不需認可時焊工的鑒定考試規范.第2部分:鋁及鋁合金的鎢極惰性氣體保護電弧焊或熔化極惰性氣體保護 |
(Specification for approval testing of welders when welding procedure approval is not required - TIG or MIG welding of aluminium and its alloys) |
| BS 4873-1986 |
鋁合金窗規范 |
(Specification for aluminium alloy windows) |
| BS 4873-2004 |
鋁合金窗 |
|
| BS 4875-1-2001 |
家具的強度和穩定性.椅和凳的強度測定方法 |
(Strength and stability of furniture - Requirements for the strength and durability of the structure of domestic and contract seating) |
| BS 4875-5-2001 |
家具的強度和穩定性.家用和定做用桌子及小臺車的強度、耐用性和穩定性要求 |
(Strength and stability of furniture - Requirements for strength, durability and stability of tables and trolleys for domestic and contract use) |
| BS 4875-7-1998 |
家具穩定性和強度.儲存家具耐力和強度的測定 |
(Strength and stability of furniture - Methods for determination of strength and durability of storage furniture) |
| BS 4875-8-1998 |
家具穩定性和強度.非家用儲存家具耐力和強度的測定方法 |
(Strength and stability of furniture - Methods for determination of stability of non-domestic storage furniture) |
| BS 4876-1984 |
家用有煙道燃油器具的性能要求(包括試驗方法)規范 |
(Specification for performance requirements for domestic flued oil burning appliances (including test procedures)) |
| BS 4877-1972 |
核反應堆裝置的一般原理推薦標準 |
(Recommendations for general principles of nuclear reactor instrumentation) |
| BS 4878-1973 |
礦和露天礦用(V型入口)大型牽引鋼索滑輪規范 |
(Specification for large (vee-throated) haulage rope pulleys for mines and quarries) |
| BS 4879-1973 |
冰淇淋與冷凍糖果包裝用涂臘紙板規范 |
(Specification for waxed board for packaging ice cream and frozen confectionery) |
| BS 4880-1-1973 |
小便池規范.第1部分:不銹鋼板制小便池 |
(Specification for urinals - Stainless steel slab urinals) |
| BS 4881-1993 |
聚丙稀薄膜芯線.電線和股線規范 |
(Specification for polypropylene film cords, lines and twines) |
| BS 4884-1-1992 |
技術手冊.第1部分:基本信息的表示規范 |
(Technical manuals - Specification for presentation of essential information) |
| BS 4884-2-1993 |
技術手冊.第2部分:內容規則 |
(Technical manuals - Guide to content) |
| BS 4884-3-1993 |
技術手冊.第3部分:表述規則 |
(Technical manuals - Guide to presentation) |
| BS 4886-1988 |
醫院用床架規范 |
(Specification for hospital bedsteads) |
| BS 4887-1-1986 |
灰漿摻和料.第1部分:引氣劑(增塑)規范 |
(Mortar admixtures - Specification for air-entraining (plasticizing) admixtures) |
| BS 4887-2-1987 |
灰漿摻和料.第2部分:緩凝劑規范 |
(Mortar admixtures - Specification for set retarding admixtures) |
| BS 489-1999 |
渦輪機潤滑劑規范 |
(Specification for turbine lubricants) |
| BS 4894-1993 |
通用開口鉚釘規范(米制系列) |
(Specification for bifurcated rivets for general purpose use (metric series)) |
| BS 4895-1981 |
一般用半空心管形鉚釘規范 |
(Specification for semi-tubular rivets for general purpose use) |
| BS 4896-1973 |
紙漿灰分的測定方法 |
(Method for the determination of ash of pulp) |
| BS 4897-4-1983 |
紙漿的痕量金屬含量.用高碘酸鈉光度測量法和火焰原子吸收光譜法測定錳含量的方法 |
(Trace metal contents of pulps - Method for determination of manganese content by sodium periodate photometric and flame atomic absorption spectrometric methods) |
| BS 4898-1973 |
鏈桿提升機規范 |
(Specification for chain lever hoists) |
| BS 4899-1-1991 |
技術手冊內容的用戶要求指南.第1部分:內容 |
(Guide to user’s requirements for technical manuals (based on the principles of BS 4884): Content) |
| BS 4899-2-1992 |
技術手冊用戶要求指南(根據BS 4884原則).第2部分:表達法 |
(Guide to user’s requirements for technical manuals (based on the principles of BS 4884): Presentation) |
| BS 490-10.1-1983 |
輸送機與提升機傳動帶.物理性能試驗.導言 |
(Conveyor and elevator belting - Testing for physical properties - Introduction) |
| BS 490-10.5-1984 |
輸送機與提升機傳動帶.物理性能試驗.橡膠覆層的抗拉強度和斷裂伸長的測定方法 |
(Conveyor and elevator belting - Testing for physical properties - Method for determination of tensile strength and elongation at break of rubber covers) |
| BS 490-10.7-1984 |
輸送機與提升機傳動帶.物理性能試驗.環狀帶長度的測定方法 |
(Conveyor and elevator belting - Testing for physical properties - Method for determination of length of an endless belt) |
| BS 490-11.2-1991 |
輸送機與提升機傳動帶.第11部分:安全試驗方法.第2節:低能量和高能量丙烷隧道試驗 |
(Conveyor and elevator belting - Methods of test for safety - Low energy and high energy propane gallery tests) |
| BS 4900-1976 |
建筑用釉層顏色規范 |
(Specification for vitreous enamel colours for building purposes) |
| BS 4901-1976 |
建筑用塑料顏色規范 |
(Specification for plastics colours for building purposes) |
| BS 4904-1978 |
建筑用外部圍護墻顏色規范 |
(Specification for external cladding colours for building purposes) |
| BS 4921-1988 |
鋼鐵件上的鍍鋅層規范 |
(Specification for sherardized coatings on iron or steel) |
| BS 4926-1973 |
二氯酚規范 |
(Specification for dichlorophen) |
| BS 4927-1-1974 |
紙、棉、絲或人造絲包銅線規范.圓線 |
(Specification for paper-, cotton-, silk- or rayon-covered copper conductors - Round wire) |
| BS 4929-2-1973 |
常作用扭矩式鋼質六角螺母規范.第2部分:統一英制系列 |
(Specification for steel hexagon prevailing-torque type nuts - Unified (inch) series) |
| BS 493-1995 |
墻壁通風用通氣空心磚和花柵規范 |
(Specification for airbricks and gratings for wall ventilation) |
| BS 4933-1973 |
ISO 米制粗制帽罩頭和沉頭螺拴、螺釘和六角螺母規范 |
(Specification for ISO metric black cup and countersunk head bolts and screws with hexagon nuts) |
| BS 4937-30-1993 |
國際熱耦參考表.第30部分:延伸和補償電纜.公差和鑒定系統 |
(International thermocouple reference tables - Extension and compensating cables - Tolerances and identification system) |
| BS 4938-1-1982 |
牛奶污垢含量.第1部分:污垢含量的測定方法(比較法) |
(Dirt content of milk - Method for the determination of dirt content (reference method)) |
| BS 4938-2-1982 |
牛奶污垢含量.第2部分:可見污垢含量的測定方法(快速法) |
(Dirt content of milk - Method for the determination of visible dirt content (rapid method)) |
| BS 4938-2P-1982 |
牛奶污垢含量.第2p部分:牛奶中可見污垢含量測定方法(快速法)的攝影標準 |
(Dirt content of milk - Photographic standards for the method for the determination of visible dirt content of milk (rapid method)) |
| BS 4939-1987 |
鋪地織物承受長期靜態重負荷后厚度損失的測定方法 |
(Method for determination of thickness loss of textile floor coverings after prolonged heavy static loading) |
| BS 4940-1-1994 |
建筑產品及服務技術信息.管理指南 |
(Technical information on construction products and services - Guide for management) |
| BS 4940-2-1994 |
建筑產品及服務技術信息.內容和編排指南 |
(Technical information on construction products and services - Guide to content and arrangement) |
| BS 4940-3-1994 |
建筑產品及服務技術信息.操作指南 |
(Technical information on construction products and services - Guide to presentation) |
| BS 4942 Pt.3-1981 |
提升用短環節鏈.第3部分:M(4)級校準鏈規范 |
(Short link chain for lifting purposes. Specification for grade M (4) calibrated chain) |
| BS 4948-1994 |
室內裝飾織物的物體接觸可見污染的評定方法 |
(Method for assessment of the visible soiling by body contact of upholstery fabrics) |
| BS 4950-1973 |
工程用噴涂和熔融金屬覆層規范 |
(Specification for sprayed and fused metal coatings for engineering purposes) |
| BS 4952-1992 |
彈性織物的試驗方法 |
(Methods of test for elastic fabrics) |
| BS 4954-1-1973 |
空氣分配系統用感應裝置的試驗及評定方法.第1部分:熱特性和空氣動力學特性 |
(Methods for testing and rating induction units for air distribution systems - Thermal and aerodynamic performance) |
| BS 4954-2-1978 |
空氣分配系統用感應裝置的試驗及評定方法.第2部分:聲學試驗和評定 |
(Methods for testing and rating induction units for air distribution systems - Acoustic testing and rating) |
| BS 4956-1973 |
拉絲用熱軋圓鋼棒的尺寸與公差規范 |
(Specification for dimensions and tolerances of hot rolled round steel rods for wire drawing) |
| BS 4962-1989 |
田間地下排水用塑料管和配件規范 |
(Specification for plastics pipes and fittings for use as subsoil field drains) |
| BS 4963-1973 |
高壓電氣設備用空心絕緣子試驗規范 |
(Specification for tests on hollow insulators for use in high voltage electrical equipment) |
| BS 4965-1999 |
彩色疊層塑料面膠合板和鑲板 |
(Decorative laminated plastics sheet veneered boards and panels) |
| BS 4966-1991 |
煉焦?fàn)t用硅質耐火材料規范 |
(Specification for silica refractories for use in coke ovens) |
| BS 4968-70-1973 |
鄰苯二甲酸二異丁酯、鄰苯二甲酸二異辛酯及癸二酸二異辛酯規范 |
(Specifications for di-isobutyl phthalate, di-isooctyl phthalate, di-isooctyl sebacate) |
| BS 4971-2002 |
文獻保護用修復和有關處理方法.推薦 |
(Repair and allied processes for the conservation of documents - Recommendations) |
| BS 4973-1-1973 |
襯里規范.第1部分:非織造縫入襯里 |
(Interlinings - Nonwoven sew-in interlinings) |
| BS 4973-2-1973 |
襯里規范.第2部分:非織造熱融襯里 |
(Interlinings - Nonwoven fusible interlinings) |
| BS 4973-3-1976 |
襯里規范.第3部分:機織和針織熱融襯里 |
(Interlinings - Woven and knitted fusible interlinings) |
| BS 4973-4-1990 |
襯里規范.第4部分:織造縫入襯里 |
(Interlinings - Specification for woven sew-in interlinings) |
| BS 4974-1975 |
鉛酸電池用水規范 |
(Specification for water for lead-acid batteries) |
| BS 4975-1990 |
核工程用預應力混凝土壓力容器規范 |
(Specification for prestressed concrete pressure vessels for nuclear engineering) |
| BS 4978-1996 |
軟木的外觀強度等級規范. |
(Specification for visual strength grading of softwood) |
| BS 498-1990 |
粗銼和鉗工銼規范 |
(Specification for rasps and engineers’ files) |
| BS 4981-1984 |
世界鞋號的鞋靴尺寸和標號制規范 |
(Specification for Mondopoint footwear sizing and marking system) |
| BS 4985-1973 |
用特?cái)?shù)制的整數值代替慣用的紗線支數的換算表 |
(Conversion table for replacing traditional yarn numbers by rounded values in the Tex System) |
| BS 4987-1-2003 |
道路及其它鋪砌區的碎石路面(瀝青混凝土).組分材料和混合物規范 |
(Coated macadam (asphalt concrete) for roads and other paved areas - Specification for constituent materials and for mixtures) |
| BS 4987-2-2003 |
道路及其它鋪砌區的碎石路面(瀝青混凝土).運輸、鋪設和壓實規范 |
(Coated macadam (asphalt concrete) for roads and other paved areas - Specification for transport, laying and compaction) |
| BS 499-1 Supplement-1992 |
焊接術語與符號.補充.電焊設備的定義 |
(Welding terms and symbols - Supplement - Definitions for electric welding equipment) |
| BS 499-2C-1999 |
焊接術語與符號.圖表中的歐洲電弧焊接符號 |
(Welding terms and symbols - European arc welding symbols in chart form) |
| BS 4991-1974 |
丙烯共聚物承壓管規范 |
(Specification for propylene copolymer pressure pipe) |
| BS 4993-1-1974 |
工業用氟化鋁的試驗方法.第1部分:氟含量的測定 |
(Methods of test for aluminium fluoride for industrial use - Determination of fluorine content) |
| BS 4993-10-1983 |
工業用氟化鋁的試驗方法.第10部分:磷含量的測定 |
(Methods of test for aluminium fluoride for industrial use - Determination of phosphorus content) |
| BS 4993-2-1974 |
工業用氟化鋁的試驗方法.第2部分:鐵含量的測定 |
(Methods of test for aluminium fluoride for industrial use - Determination of iron content) |
| BS 4993-3-1974 |
工業用氟化鋁的試驗方法.第3部分:硅含量的測定 |
(Methods of test for aluminium fluoride for industrial use - Determination of silica content) |
| BS 4993-4-1980 |
工業用氟化鋁的試驗方法.第4部分:試樣的制備和貯存 |
(Methods of test for aluminium fluoride for industrial use - Preparation and storage of test samples) |
| BS 4993-5-1980 |
工業用氟化鋁的試驗方法.第5部分:含水量的測定(卡爾費希爾法) |
(Methods of test for aluminium fluoride for industrial use - Determination of moisture content (Karl Fischer method)) |
| BS 4993-6-1980 |
工業用氟化鋁的試驗方法.第6部分:含水量的測定(重量法) |
(Methods of test for aluminium fluoride for industrial use - Determination of moisture content (gravimetric method)) |
| BS 4993-7-1980 |
工業用氟化鋁的試驗方法.第7部分:鈉含量的測定 |
(Methods of test for aluminium fluoride for industrial use - Determination of sodium content) |
| BS 4993-8-1980 |
工業用氟化鋁的試驗方法.第8部分:硫酸鹽含量的測定 |
(Methods of test for aluminium fluoride for industrial use - Determination of sulphate content) |
| BS 4993-9-1980 |
工業用氟化鋁的試驗方法.第9部分:硫含量的測定(x射線熒光光譜測定法) |
(Methods of test for aluminium fluoride for industrial use - Determination of sulphur content (X-ray fluorescence spectrometric method)) |
| BS 4994-1987 |
增強塑料容器及桶的設計和結構規范 |
(Specification for design and construction of vessels and tanks in reinforced plastics) |
| BS 4995-1973 |
透鏡及光學系統紗幕眩光指數測量的推薦標準 |
(Recommendations for measurement of the veiling glare index of lenses and optical systems) |
| BS 4996-1973 |
動力線載波通信系統用線路陷波器規范 |
(Specification for line traps for power line carrier systems) |
| BS 4998-1985 |
模塑熱塑性塑料吸塵箱(蓋除外)規范 |
(Specification for moulded thermoplastics dustbins (excluding lids)) |
| BS 4999-0-1987 |
旋轉電機的一般要求.第0部分:一般介紹和其他部件的介紹 |
(General requirements for rotating electrical machines - General introduction and information on other Parts) |
| BS 4999-103-1987 |
旋轉電機的一般要求.第103部分:符號規范 |
(General requirements for rotating electrical machines - Specification for symbols) |
| BS 4999-103-2004 |
旋轉電機的一般要求.符號規范 |
|
| BS 4999-111-1987 |
旋轉電機的一般要求.第111部分:額定電壓小于和等于交流660V的電動機的內裝式熱防護規范 |
(General requirements for rotating electrical machines - Specification for built-in thermal protection for electric motors rated at 660 volts a.c. and below) |
| BS 4999-140-1987 |
旋轉電機的一般要求.第140部分:交流同步發電機的電壓調節和并聯運行規范 |
(General requirements for rotating electrical machines - Specification for voltage regulation and parallel operation of a.c. synchronous generators) |
| BS 4999-141-1987 |
旋轉電機的一般要求.第141部分:標準尺寸規范 |
(General requirements for rotating electrical machines - Specification for standard dimensions) |
| BS 4999-141-2004 |
旋轉電機的一般要求.標準尺寸規范 |
|
| BS 4999-142-1987 |
旋轉電機的一般要求.第142部分:機械性能--振動規范 |
(General requirements for rotating electrical machines - Specification for mechanical performance: vibration) |
| BS 4999-143-1987 |
旋轉電機的一般要求.第143部分:試驗規范 |
(General requirements for rotating electrical machines - Specification for tests) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com