標準號 |
中文名稱 |
英文名稱 |
| BS 5306-5.2-1984 |
住房用滅火裝置及設備.第5部分:哈朗(聚四氟乙烯)滅火系統.第2節:哈朗(聚四氟乙烯)211全溢流裝置 |
(Code of practice for fire extinguishing installations and equipment on premises - Halon systems - Halon 1211 total flooding systems) |
| BS 5306-6.1-1988 |
住房用滅火裝置及設備.第6部分:泡沫滅火系統.第1節:低發泡泡沫滅火系統規范 |
(Fire extinguishing installations and equipment on premises - Foam systems - Specification for low expansion foam systems) |
| BS 5306-6.2-1989 |
住房用滅火裝置及設備.第6部分:泡沫滅火系統.第2節:中、高發泡泡沫滅火系統規范 |
(Fire extinguishing installations and equipment on premises - Foam systems - Specification for medium and high expansion foam systems) |
| BS 5306-8-2000 |
住房用滅火裝置及設備.便攜式滅火機的選擇和安裝實施規程 |
(Fire extinguishing installations and equipment on premises - Selection and installation of portable fire extinguishers - Code of practice) |
| BS 5307-1976 |
普通球鎖沖床規范 |
(Specification - Basic ball-lock punches) |
| BS 5308-1-1986 |
儀器用電纜.第1部分:聚乙烯絕緣電纜規范 |
(Instrumentation cables - Specification for polyethylene insulated cables) |
| BS 5308-2-1986 |
儀器用電纜.第2部分:聚氯乙烯絕緣電纜規范 |
(Instrumentation cables - Specification for PVC insulated cables) |
| BS 5309-1-1976 |
化學制品的取樣方法.第1部分:序言和一般原則 |
(Methods for sampling chemical products - Introduction and general principles) |
| BS 5309-2-1976 |
化學制品的取樣方法.第2部分:燃氣取樣 |
(Methods for sampling chemical products - Sampling of gases) |
| BS 5309-3-1976 |
化學制品的取樣方法.第3部分:液體取樣 |
(Methods for sampling chemical products - Sampling of liquids) |
| BS 5309-4-1976 |
化學制品的取樣方法.第4部分:固體取樣 |
(Methods for sampling chemical products - Sampling of solids) |
| BS 5315-1991 |
一般用軟管夾(蝸桿驅動)規范(米制系列) |
(Specification for hose clamps (worm drive type) for general purpose use (metric series)) |
| BS 5317-1976 |
米制長度量棒及其附件規范 |
(Specification - Metric length bars and their accessories) |
| BS 5325-2001 |
鋪地織物的鋪設.實施規程 |
(Installation of textile floor coverings - Code of practice) |
| BS 5326-1976 |
內孔拉刀和控制夾頭定位裝置規范 |
(Specification - Internal broaching tools and pull chuck locations) |
| BS 5327-1976 |
流體動力裝置用后直角彎頭規范 |
(Specification - Swept elbow bends for fluid power applications) |
| BS 5328 Pt.2-1997 |
混凝土.第2部分:混凝土扳合料的確定方法 |
(Concrete. Methods for specifying concrete mixes) |
| BS 5328 Pt.3-1990 |
混凝土.第3部分:混凝土生產和運輸中所用方法的規格 |
(Concrete. Specification for the procedures to be used in producing and transporting concrete) |
| BS 5328 Pt.4-1990 |
混凝土.第4部分:混凝土取樣、試驗和合格評定所用方法的規格 |
(Concrete. Specification for the procedures to be used in sampling, testing and assessing compliance of concrete) |
| BS 5330-1976 |
估計噪聲造成的聽覺障礙可能性的試驗方法 |
(Method of test for estimating the risk of hearing handicap due to noise exposure) |
| BS 5332-1982 |
用于串行記錄的產生和交換的數據單規范 |
(Specification for data elements for the generation and exchange of serials records) |
| BS 5335-1-1991 |
歐洲大陸被子.第1部分:被子填充物(除羽毛和/或羽絨外)規范 |
(Continental quilts - Specification for quilts containing fillings other than feather and/or down) |
| BS 5335-2-1991 |
歐洲大陸被子.第2部分:被子填充物(羽毛和/或羽絨毛)規范 |
(Continental quilts - Specification for quilts filled with feather and/or down) |
| BS 5336-1976 |
高磁通密度變壓器用鐵氧體鐵芯規范 |
(Specification - Cores made of ferromagnetic oxides for use in high flux density transformers) |
| BS 5338-1976 |
工程用鋅合金壓模鑄件規程 |
(Code of practice for zinc alloy pressure die casting for engineering) |
| BS 5339-1976 |
液態化學制品顏色按黑曾(Hazen)單位(鉑-鈷度標)的測量方法 |
(Method of measurement of colour in Hazen units (platinum-cobalt scale) of liquid chemical products) |
| BS 5341-5-1976 |
往復式內燃機用小于和等于200mm直徑的活塞環.第5部分:環槽 |
(Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Ring grooves) |
| BS 5341-6.1-1992 |
往復式內燃機用直徑小于和等于200mm的活塞環.第6部分:詞匯.檢驗方法和總規范.第1節;詞匯 |
(Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Vocabulary, inspection methods and generic specifications - Vocabulary) |
| BS 5341-6.5-1992 |
往復式內燃機用直徑小于和等于200mm的活塞環.第6部分:詞匯.檢驗方法和總規范.第5節:質量要求 |
(Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Vocabularly, inspection methods and generic specifications - Quality requirements) |
| BS 5341-7.2-1992 |
往復式內燃機用直徑小于和等于200mm的活塞環.單片環的設計、尺寸和名稱.刮油環規范 |
(Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Designs, dimensions and designations for single piece rings - Specification for scraper rings) |
| BS 5341-7.3.1-1992 |
往復式內燃機用直徑小于和等于200mm的活塞環.單片環的設計、尺寸和名稱.楔表面和半楔表面壓縮環.楔表面環的 |
(Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Designs, dimensions and designations for single piece rings - Keystone and half keystone compression rings - Specific) |
| BS 5341-7.4-1992 |
往復式內燃機用直徑小于和等于200mm的活塞環.單片環的設計、尺寸和名稱.油控制環的規范 |
(Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Designs, dimensions and designations for single piece rings - Specification for oil control rings) |
| BS 5341-8.1-1992 |
往復式 內燃機用直徑小于和等于200mm的活塞環.第8部分:多片組合式控油環的設計、尺寸和命名.第1節:盤簧加壓 |
(Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Designs, dimensions and designations for multi-piece oil control rings - Specification for coil-spring-loaded oil con) |
| BS 5342-1985 |
高壓飽和蒸汽用橡膠管規范 |
(Specification for rubber hoses for high-pressure saturated steam) |
| BS 5343-2-1991 |
氣體檢測管.第2部分:遠距氣體檢測管規范 |
(Gas detector tubes - Specification for long term gas detector tubes) |
| BS 5344-1985 |
旋轉和沖擊氣動工具的性能試驗方法 |
(Methods for performance tests for rotary and percussive pneumatic tools) |
| BS 5346-1976 |
ISO 米制梯形螺紋規范 |
(Specification - ISO metric trapezoidal screw threads) |
| BS 5347-1976 |
電信和電子設備中的變壓器和感應線圈用的硅鐵帶繞鐵芯規范 |
(Specification for silicon-iron strip-wound cores for use in transformers and inductors for telecommunications and electronic equipment) |
| BS 5348-2-1989 |
肉類和肉類制品的取樣方法.第2部分:檢測微生物用的試驗樣品的制備 |
(Methods for sampling meat and meat products - Preparation of test samples for microbiological examination) |
| BS 5350-0-1987 |
粘合劑的試驗方法.一般說明 |
(Methods of test for adhesives - General introduction) |
| BS 5350-A1-1976 |
粘合劑的試驗方法.粘附體.粘附體的制備 |
(Methods of test for adhesives - Adherends - Adherend preparation) |
| BS 5350-A2-1990 |
粘合劑的試驗方法.粘附體.被粘材料的選擇導則 |
(Methods of test for adhesives - Adherends - Guide to the selection of adherend materials) |
| BS 5350-B1-1978 |
粘合劑的試驗方法.密度的測定 |
(Methods of test for adhesives - Determination of density) |
| BS 5350-B2-1976 |
粘合劑的試驗方法.粘合劑.固體物含量的測定 |
(Methods of test for adhesives - Adhesives - Determination of solids content) |
| BS 5350-B5-1976 |
粘合劑的試驗方法.膠凝時間的測定 |
(Methods of test for adhesives - Determination of gelation time) |
| BS 5350-B8-1991 |
粘合劑的試驗方法.粘合劑.粘度的測定 |
(Methods of test for adhesives - Adhesives - Determination of viscosity) |
| BS 5350-B9-1984 |
粘合劑的試驗方法.粘合劑.抗下垂測定(施加后流下) |
(Methods of test for adhesives - Adhesives - Determination of resistance to sagging (flow after application)) |
| BS 5350-C1-1986 |
粘合劑的試驗方法.粘結部位的機械試驗.粘結部位抗劈裂強度的測定 |
(Methods of test for adhesives - Adhesively bonded joints: mechanical tests - Determination of cleavage strength of adhesive bonds) |
| BS 5350-C13-1990 |
粘合劑的試驗方法.粘結部位的機械試驗.爬升式滾筒剝離試驗 |
(Methods of test for adhesives - Adhesively bonded joints: mechanical tests - Climbing drum peel test) |
| BS 5350-C14-1979 |
粘合劑的試驗方法.粘結部位:機械試驗.剛性對剛性組件的90度剝離試驗 |
(Methods of test for adhesives - Adhesively bonded joints: mechanical tests - 90 ?peel test for a rigid-to-rigid assembly) |
| BS 5350-C15-1990 |
粘合劑的試驗方法.粘結部位的機械試驗.在壓縮剪切下粘接強度的測定 |
(Methods of test for adhesives - Adhesively bonded joints: mechanical tests - Determination of bond strength in compressive shear) |
| BS 5350-C5-2002 |
粘合劑的試驗方法.硬質被粘物抗縱向剪切粘結強度的測定 |
(Methods of test for adhesives - Determination of bond strength in longitudinal shear for rigid adherends) |
| BS 5350-C6-1990 |
粘合劑的試驗方法.粘結部位的機械試驗.膠合板在直接拉伸下膠結強度的測定 |
(Methods of test for adhesives - Adhesively bonded joints: mechanical tests - Determination of bond strength in direct tension in sandwich panels) |
| BS 5350-C7-1990 |
粘合劑的試驗方法.粘結部位的機械試驗.蠕變和耐持續施加力的測定 |
(Methods of test for adhesives - Adhesively bonded joints: mechanical tests - Determination of creep and resistance to sustained application of force) |
| BS 5350-D4-1976 |
粘合劑的試驗方法.粘接連接部位:著色可能性的測定 |
(Methods of test for adhesives - Adhesively bonded joints: environmental tests - Determination of staining potential) |
| BS 5350-E1-1976 |
粘合劑的試驗方法.試驗數據的取樣和分析.統計分析指南 |
(Methods of test for adhesives - Sampling and analysis of test data - Guide to statistical analysis) |
| BS 5350-E2-1979 |
粘合劑的試驗方法.試驗數據的取樣和分析.取樣指南 |
(Methods of test for adhesives - Sampling and analysis of test data - Guide to sampling) |
| BS 5350-G2-1987 |
粘合劑的試驗方法.厭氧粘合劑的試驗.厭氧粘合劑的靜抗剪強度的測定 |
(Methods of test for adhesives - Tests on anaerobic adhesives - Determination of static shear strength of anaerobic adhesives) |
| BS 5350-G3-1987 |
粘合劑的試驗方法.放在金屬表面上的厭氧粘合劑性能的測定 |
(Methods of test for adhesives - Determination of ability of anaerobic adhesives to set on metal surfaces) |
| BS 5350-H1-1981 |
粘合劑的試驗方法.第H1部分:應用設備中熱熔粘合劑熱穩定性的測定 |
(Methods of test for adhesives - Determination of heat stability of hot melt adhesives in the application equipment) |
| BS 5350-H2-1982 |
粘合劑的試驗方法.熱熔粘合劑物理試驗.低溫撓性及冷爆裂溫度的測定 |
(Methods of test for adhesives - Physical tests on hot-melt adhesives - Determination of low temperature flexibility or cold crack temperature) |
| BS 5350-H3-1984 |
粘合劑的試驗方法.熱熔粘合劑物理試驗.熱熔粘合劑耐熱性的測定 |
(Methods of test for adhesives - Physical tests on hot-melt adhesives - Determination of heat resistance of hot-melt adhesives) |
| BS 5350-H4-1984 |
粘合劑的試驗方法.熱熔粘合劑的物理試驗.熱熔粘合劑的最大斷開時間測定(熱爐法) |
(Methods of test for adhesives - Physical tests on hot-melt adhesives - Determination of maximum open time of hot-melt adhesives (oven method)) |
| BS 5351-1986 |
石油、石油化工及類似工業用鋼球閥規范 |
(Specification for steel ball valves for the petroleum, petrochemical and allied industries) |
| BS 5353-1989 |
鋼塞閥規范 |
(Specification for steel plug valves) |
| BS 5355-1976 |
可液化氣體和不可液化氣體的填充率和擴張壓力規范 |
(Specification for filling ratios and developed pressures for liquefiable and permanent gases) |
| BS 5357-1995 |
安全窗用玻璃的安裝實用規程 |
(Code of practice for installation of security glazing) |
| BS 5367-1976 |
砂布、砂紙和砂帶的尺寸 |
(Dimensions of coated abrasives) |
| BS 5368-1-1976 |
窗的試驗方法.第1部分:透氣性試驗 |
(Methods of testing windows - Air permeability test) |
| BS 5368-4-1978 |
窗的試驗方法.第4部分:試驗報告的格式 |
(Methods of testing windows - Form of test report) |
| BS 5372-1997 |
額定電壓為600/1000V和1900/3700V的銅或鋁導體多芯擠制固體介電絕緣電纜終端的尺寸規范 |
(Specification for dimensions of cable terminations for multi-core extruded solid dielectric insulated distribution cables of rated voltages 600/1000 V and 1900/3300 V having copper or aluminium conduc) |
| BS 5377-1-1988 |
用棉制對比布評定洗滌效果.第1部分:棉制對比布的制備及使用規范 |
(Assessment of laundering effects by means of a cotton control cloth - Specification for preparation and use of the cotton control cloth) |
| BS 5377-2-1990 |
用棉制對比布評定洗滌效果.第2部分:潔凈棉制對比布試驗與分析方法 |
(Assessment of laundering effects by means of a cotton control cloth - Methods of analysis and test for the unsoiled cotton control cloth) |
| BS 5378-2-1980 |
安全信號及顏色.第2部分:材料的比色及光度特性規范 |
(Safety signs and colours - Specification for colorimetric and photometric properties of materials) |
| BS 5380-1984 |
用O 型圈密封及G 系列緊固螺紋的液壓系流入口及連接螺栓規范 |
(Specification for hydraulic port and stud coupling using ’O’-ring sealing and ’G’ series fastening threads) |
| BS 5381-2-1998 |
煙草和煙草制品物理特性的測定方法.用激光束測量儀器對卷煙和過濾棒標準直徑的測定 |
(Methods for determination of physical properties of tobacco and tobacco products - Nominal diameter of cigarettes and filter rods using a laser beam measuring apparatus) |
| BS 5381-4-1998 |
煙草和煙草制品物理特性的測定方法.用于卷煙紙、過濾嘴、過濾連接紙的材料空氣滲透性的測定 |
(Methods for determination of physical properties of tobacco and tobacco products - Determination of air permeability of materials used as cigarette papers, filter plug wrap and filter joining paper) |
| BS 5381-5-1999 |
煙草和煙草制品物理性能的測定方法.香煙的抗拉性和過濾嘴的壓降性能 |
(Methods for determination of physical properties of tobacco and tobacco products - Draw resistance of cigarettes and pressure drop of filter rods) |
| BS 5381-7-1997 |
煙草和煙草制品物理性能的測定方法.用旋轉籠測定過濾嘴端煙草損失 |
(Methods for determination of physical properties of tobacco and tobacco products - Loss of tobacco from cigarette ends using a rotating cylindrical cage) |
| BS 5381-8-1997 |
煙草和煙草制品物理性能的測定方法.用旋轉立方盒測定卷煙末端煙草損失 |
(Methods for determination of physical properties of tobacco and tobacco products - Loss of tobacco from cigarette ends using a rotating cubic box (sismelatophore)) |
| BS 5383-1986 |
鋼鎳合金及鈦合金制金屬管及管道系統零件的材料標志與顏色編碼規范 |
(Specification for material identification of steel, nickel alloy and titanium alloy tubes by continuous character marking and colour coding of steel tubes) |
| BS 5385-1-1995 |
墻和地貼瓷磚.第1部分:在普通情況下室內用墻貼瓷磚及錦磚的設計與鋪砌實用規程 |
(Wall and floor tiling - Code of practice for the design and installation of internal ceramic and natural stone wall tiling and mosaics in normal conditions) |
| BS 5385-2-1992 |
墻和鋪地面磚.第2部分:外墻用陶瓷磚及錦磚的設計和安裝的實用規程(包括琉璃磚和彩瓷磚) |
(Wall and floor tiling - Code of practice for the design and installation of external ceramic wall tiling and mosaics (including terra cotta and faience tiles)) |
| BS 5385-3-1989 |
貼墻和貼地瓷磚.第3部分:陶瓷地面磚和錦磚 |
(Wall and floor tiling - Code of practice for the design and installation of ceramic floor tiles and mosaics) |
| BS 5385-4-1992 |
墻和鋪地面磚.第4部分:特殊條件下貼瓷磚和馬賽克實用規程 |
(Wall and floor tiling - Code of practice for tiling and mosaics in specific conditions) |
| BS 5385-5-1994 |
墻和地面貼磚.第5部分:水磨石貼磚和石板、天然石和混合方塊鋪地面的設計和安裝實用規程 |
(Wall and floor tiling - Code of practice for the design and installation of terrazzo tile and slab, natural stone and composition block floorings) |
| BS 5386-6-1991 |
燃氣設備規范.帶強制對流式灶的家用烹飪炊具的規范 |
(Specification for gas burning appliances - Specification for domestic gas cooking appliances with forced-convection ovens) |
| BS 5388-1976 |
噴頭規范 |
(Specification for spray taps) |
| BS 5391-1-1976 |
丙烯腈-丁二烯-苯乙烯(ABS)壓力管規范.第1部分:工業用管 |
(Specification for acrylonitrile-butadiene-styrene (ABS) pressure pipe - Pipe for industrial uses) |
| BS 5392-1-1976 |
丙烯腈-丁二烯-苯乙烯(ABS)壓力管配件規范.第1部分:工業用管配件 |
(Specification for acrylonitrile-butadiene-styrene (ABS) fittings for use with ABS pressure pipe - Fittings for use with pipe for industrial uses) |
| BS 5395-1-2000 |
樓梯、梯子和走道.單跑樓梯和斜踏步的設計、制造和維修的實施規范 |
(Stairs, ladders and walkways - Code of practice for the design, construction and maintenance of straight stairs and winders) |
| BS 5395-2-1984 |
樓梯、梯子和走道.旋轉式和盤旋式樓梯設計實用規程 |
(Stairs, ladders and walkways - Code of practice for the design of helical and spiral stairs) |
| BS 5396-1976 |
船用固定式滅火器的無縫鋼二氧化碳容器規范 |
(Specification for seamless steel CO) |
| BS 5397-6-1990 |
高級數據鏈路控制規程.第6部分:多鏈程序規范 |
(High-level data link control (HDLC) procedures - Specification for multilink procedures) |
| BS 5398-1976 |
漁網的綴合與連結法分類 |
(Classification of methods for mounting and joining of fishing nets) |
| BS 5400-1-1988 |
鋼、混凝土及混合結構橋.第1部分:一般說明 |
(Steel, concrete and composite bridges - General statement) |
| BS 5400-10-1980 |
鋼、混凝土及混合結構橋.第10部分:評價疲勞強度的實用規范 |
(Steel, concrete and composite bridges - Code of practice for fatigue) |
| BS 5400-10C-1999 |
鋼混凝土混合橋梁.疲勞的詳細分類圖 |
(Steel, concrete and composite bridges - Charts for classification of details for fatigue) |
| BS 5400-3-2000 |
鋼、混凝土及混合結構橋.鋼橋設計的實施規程 |
(Steel, concrete and composite bridges - Code of practice for design of steel bridges) |
| BS 5400-4-1990 |
鋼、混凝土及混合結構橋.第4部分:混凝土橋設計實用規程 |
(Steel, concrete and composite bridges - Code of practice for design of concrete bridges) |
| BS 5400-5-1979 |
鋼、混凝土及混合結構橋.第5部分:混合結構橋設計實用規范 |
(Steel, concrete and composite bridges - Code of practice for design of composite bridges) |
| BS 5400-6-1999 |
鋼混凝土混合橋梁.材料,工藝和鋼的規格 |
(Steel, concrete and composite bridges - Specification for materials and workmanship, steel) |
| BS 5400-7-1978 |
鋼、混凝土及混合結構橋.第7部分:材料和加工質量、混凝土、鋼筋及預應力鋼筋束規范 |
(Steel, concrete and composite bridges - Specification for materials and workmanship, concrete, reinforcement and prestressing tendons) |
| BS 5400-8-1978 |
鋼、混凝土及混合結構橋.第8部分:材料和加工質量、混凝土、鋼筋及預應力鋼筋束推薦規范 |
(Steel, concrete and composite bridges - Recommendations for materials and workmanship, concrete, reinforcement and prestressing tendons) |
| BS 5400-9.1-1983 |
鋼、混凝土及混合結構橋.橋支承架.橋支承架設計實施規程 |
(Steel, concrete and composite bridges - Bridge bearings - Code of practice for design of bridge bearings) |
| BS 5400-9.2-1983 |
鋼、混凝土及混合結構橋.橋支承架.橋支承架的材料、加工和安裝規范 |
(Steel, concrete and composite bridges - Bridge bearings - Specification for materials, manufacture and installation of bridge bearings) |
| BS 5401-1990 |
農林用拖拉機及機具操作人員手冊的信息量和表述方法 |
(Guide to information content and presentation of operators’ manuals provided for tractors and machinery for agriculture and forestry) |
| BS 5402-1976 |
病人用手推車規范 |
(Specification for patient trolleys) |
| BS 5404-1-1976 |
塑料實驗室容器規范.第1部分:燒杯 |
(Specification for plastics laboratory ware - Beakers) |
| BS 5404-2-1977 |
塑料實驗室容器規范.第2部分:有刻度的量筒 |
(Specification for plastics laboratory ware - Graduated measuring cylinders) |
| BS 5404-3-1977 |
塑料實驗室容器規范.第3部分:濾液漏斗 |
(Specification for plastics laboratory ware - Filter funnels) |
| BS 5404-4-1979 |
塑料實驗室容器規范.第4部分:洗滌瓶 |
(Specification for plastics laboratory ware - Wash bottles) |
| BS 5406-1-1988 |
家用及類似電氣設備在供電系統內引起的干擾.術語詞匯 |
(Disturbances in supply systems caused by household appliances and similar electrical equipment - Glossary of terms) |
| BS 5409-1-1976 |
尼龍管規范.第1部分:主要用于氣動裝置的11型及12型全增塑尼龍管 |
(Specification for nylon tubing - Fully plasticized nylon tubing types 11 and 12 for use primarily in pneumatic installations) |
| BS 5409-2-1978 |
尼龍管規范.第2部分:主要用于汽車工業的11型及12型增塑或未增塑的尼龍管 |
(Specification for nylon tubing - Plasticized and unplasticized nylon tubing types 11 and 12 for use primarily in the automobile industry) |
| BS 5410-1-1998 |
燃油規范.輸出功率小于和等于45KW的環流供暖及熱水供應用鍋爐裝置 |
(Code of practice for oil firing - Installations up to 45 kW output capacity for space heating and hot water supply purposes) |
| BS 5410-2-1978 |
燃油實施規范.空間加熱、熱水和蒸汽供應設備用輸出功率為大于和等于45kW的裝置 |
(Code of practice for oil firing - Installations of 45 kW and above output capacity for space heating, hot water and steam supply services) |
| BS 5410-3-1976 |
燃油實用規程.第3部分:加熱爐、火爐、烤爐及其他工業用鍋爐裝置 |
(Code of practice for oil firing - Installations for furnaces, kilns, ovens and other industrial purposes) |
| BS 5412-1996 |
適用于最大PN 10、最低液壓0.01MPa(0.1bar)的低阻單一和復合龍頭組件 |
(額定尺寸(Specification for low-resistance single taps and combination tap assemblies (nominal size) |
| BS 5414-1976 |
漁網網紗伸長度測定的試驗方法 |
(Method of test for determination of elongation of netting yarns for fishing nets) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com