標準號 |
中文名稱 |
英文名稱 |
| BS EN 13872-2004 |
平整和/或找平復合物的試驗方法.尺寸變化的測定 |
|
| BS EN 13876-2004 |
運輸.后勤和服務.貨物運輸鏈.貨物運輸服務提供的實施規則 |
|
| BS EN 13877-1-2004 |
混凝土鋪面. 材料 |
|
| BS EN 13877-2-2005 |
混凝土路面.混凝土路面的功能要求 |
|
| BS EN 13878-2003 |
休閑度假用旅行房車.術語和定義 |
(Leisure accommodation vehicles - Terms and definitions) |
| BS EN 13879-2002 |
人造木板.邊沿彎曲性能的測定 |
(Wood-based panels - Determination of edgewise bending properties) |
| BS EN 1388-1-1996 |
與食品接觸的材料和物品.硅化表面.第1部分:測定從陶瓷品中釋放的鉛和鎘 |
(Materials and articles in contact with foodstuffs - Silicate surfaces - Determination of the release of lead and cadmium from ceramic ware) |
| BS EN 1388-2-1996 |
與食品接觸的材料和物品.硅化表面.第2部分:除陶瓷品外測定從硅化表面釋放的鉛和鎘 |
(Materials and articles in contact with foodstuffs - Silicate surfaces - Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware) |
| BS EN 13880-1-2003 |
熱用接縫密封膠.25 鳦時密度測定的試驗方法 |
(Hot applied joint sealants - Test method for the determination of density at 25 鳦) |
| BS EN 13880-10-2003 |
熱用接縫密封膠.連續膨脹和壓縮后粘結性測定的試驗方法 |
(Hot applied joint sealants - Test method for the determination of adhesion and cohesion following continuous extension and compression) |
| BS EN 13880-11-2003 |
熱用密封膠.功能試驗用瀝青試驗塊滲透性及與瀝青路面兼容性測定的試驗方法 |
(Hot applied joint sealants - Test method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with asphalt pavements) |
| BS EN 13880-12-2003 |
熱用接縫密封膠.粘結試驗用混凝土試驗塊生產的試驗方法(配方法) |
(Hot applied joint sealants - Test method for the manufacture of concrete test blocks for bond testing (recipe methods)) |
| BS EN 13880-13-2003 |
熱用填縫密封膠.非連續伸展性測定的試驗方法(粘附試驗) |
(Hot applied joint sealants - Test method for the determination of the discontinuous extension (adherence test)) |
| BS EN 13880-2-2003 |
熱用接縫密封膠.25 鳦時針入度測定的試驗方法 |
(Hot applied joint sealants - Test method for the determination of cone penetration at 25 鳦) |
| BS EN 13880-3-2003 |
熱用密封膠.滲透性和恢復性(回彈性)測定的試驗方法 |
(Hot applied joint sealants - Test method for the determination of penetration and recovery (resilience)) |
| BS EN 13880-4-2003 |
熱用密封膠.耐熱性測定的試驗方法.穿透值的變化 |
(Hot applied joint sealants - Test method for the determination of heat resistance - Change in penetration value) |
| BS EN 13880-5-2004 |
熱用接縫密封膠.抗流動性測定的試驗方法 |
|
| BS EN 13880-6-2004 |
熱用密封膠.試驗用樣品制備的方法 |
|
| BS EN 13880-7-2003 |
熱用接縫密封膠.接縫密封膠功能檢驗 |
(Hot applied joint sealants - Function testing of joint sealants) |
| BS EN 13880-8-2003 |
熱用接縫密封膠.燃料浸漬后耐燃料接縫密封膠重量變化的測定用試驗方法 |
(Hot applied joint sealants - Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion) |
| BS EN 13880-9-2003 |
熱用密封膠.與瀝青路面兼容性的測定的試驗方法 |
(Hot applied joint sealants - Test method for the determination of compatibility with asphalt pavements) |
| BS EN 13885-2005 |
食品加工機.剪斷機.安全和衛生要求 |
|
| BS EN 13886-2005 |
食品加工機械.裝有電動攪拌器和/或混合器的蒸煮罐.安全和衛生要求 |
|
| BS EN 13887-2003 |
結構膠粘劑.膠粘劑粘結前金屬和塑料表面制備指南 |
(Structural adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding) |
| BS EN 13888-2002 |
磁磚用泥漿.定義和規范 |
(Grouts for tiles - Definitions and specifications) |
| BS EN 13889-2003 |
一般提升用鍛鋼卸扣.D形和弓形卸扣.等級為6.安全 |
(Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6. Safety) |
| BS EN 1389-2004 |
高級工業陶瓷.陶瓷復合材料.物理性能.密度和表觀孔隙率的測定 |
|
| BS EN 13890-2002 |
工作場所空氣.空氣粒子中金屬和類金屬的測量程序.要求和試驗方法 |
(Workplace atmospheres - Procedures for measuring metals and metalloids in airborne particles - Requirements and test methods) |
| BS EN 13891-2004 |
拉伸皮帶材料.拉伸皮帶材料的選擇和使用指南 |
|
| BS EN 13892-1-2002 |
找平層材料的試驗方法.抽樣、做標記和切割試驗樣品 |
(Methods of test for screed materials - Sampling, making and curing specimens for test) |
| BS EN 13892-2-2002 |
找平層材料的試驗方法.彎曲和壓縮強度的測定 |
(Methods of test for screed materials - Determination of flexural and compressive strength) |
| BS EN 13892-3-2004 |
找平層材料的試驗方法.Boehme耐磨性的測定 |
|
| BS EN 13892-4-2002 |
找平層材料的試驗方法.BCA耐磨性的測定 |
(Methods of test for screed materials - Determination of wear resistance-BCA) |
| BS EN 13892-5-2003 |
找平層材料的試驗方法.磨損層用找平層材料耐滾動輪磨損的測定 |
(Methods of test for screed materials - Determination of wear resistance to rolling wheel of screed material for wearing layer) |
| BS EN 13892-6-2002 |
找平層材料的試驗方法.表面硬度的測定 |
(Methods of test for screed materials - Determination of surface hardness) |
| BS EN 13892-7-2003 |
找平層材料的試驗方法.有地板覆蓋物時找平層材料耐滾動輪磨損的測定 |
(Methods of test for screed materials - Determination of wear resistance to rolling wheel of screed material with floor coverings) |
| BS EN 13892-8-2002 |
找平層材料的試驗方法.粘結強度的測定 |
(Methods of test for screed materials - Determination of bond strength) |
| BS EN 13893-2002 |
彈性地板覆蓋物、疊層地板覆蓋物和鋪地織物.干地板表面動態磨擦系數的測量 |
(Resilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces) |
| BS EN 13894-2-2002 |
混凝土結構的修理和保護產品及系統.試驗方法.硬化后,在動態負載下疲勞強度的測定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of fatigue under dynamic loading - After hardening) |
| BS EN 13895-2003 |
織物.單絲.抗拉特性的測定 |
(Textiles - Monofilaments - Determination of tensile properties) |
| BS EN 13898-2003 |
機床.安全.冷金屬鋸床 |
(Machine tools - Safety - Sawing machines for cold metal) |
| BS EN 13899-2003 |
滾軸運動設備.旱冰鞋.安全要求和試驗方法 |
(Roller sports equipment - Roller skates - Safety requirements and test methods) |
| BS EN 139-1995 |
呼吸保護裝置.與全罩式面罩、半罩式面罩或口罩一起使用的壓縮空氣導管呼吸裝置.要求、試驗和標志 |
(Respiratory protective devices - Compressed air line breathing apparatus for use with a full face mask, half mask or a mouthpiece assembly - Requirements, testing, marking) |
| BS EN 13900-1-2003 |
顏料和填充劑.擴散方法和在塑料中可擴散性的評估.概述 |
(Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - General introduction) |
| BS EN 13900-2-2003 |
顏料和填充劑.擴散方法和在塑料中可擴散性的評估.用兩輥磨測定色彩特點和在增塑聚氯乙烯中的易擴散性 |
(Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-ro) |
| BS EN 13900-3-2003 |
顏料和填充劑.擴散方法和在塑料中可擴散性的評估.用兩輥磨測定色彩特點和炭黑及彩色顏料在聚乙烯中的易擴散 |
(Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylen) |
| BS EN 13900-4-2004 |
顏料和填充劑.擴散方法和在塑料中可擴散性的評定.用雙輥研磨機測定聚乙烯中白顏料的顏色性能和易擴散性 |
|
| BS EN 13904-2003 |
衛生設備旋塞用低阻力淋浴出水口 |
(Low resistance shower outlets for sanitary tapware) |
| BS EN 13905-2003 |
衛生設備旋塞用低阻力淋浴軟管 |
(Low resistance shower hoses for sanitary tapware) |
| BS EN 13906-1-2002 |
圓形金屬絲和棒材制柱形螺旋彈簧.計算和設計.壓縮彈簧 |
(Cylindrical helical springs made from round wire and bar - Calculation and design - Compression springs) |
| BS EN 13906-2-2002 |
由圓形金屬絲和棒材制成園柱形螺旋彈簧.計算和設計.伸展彈簧 |
(Cylindrical helical springs made from round wire and bar - Calculation and design - Extension springs) |
| BS EN 13906-3-2002 |
由圓形金屬絲和棒材制成園柱形螺旋彈簧.計算和設計.扭轉彈簧 |
(Cylindrical helical springs made from round wire and bar - Calculation and design - Torsion springs) |
| BS EN 1391-1998 |
皮革和鞋靴材料用膠粘劑.評估材料粘合程度的方法.最低要求和材料分類 |
(Adhesives for leather and footwear materials - A method for evaluating the bondability of materials - Minimum requirements and material classification) |
| BS EN 13911-2004 |
消防員防護服.消防員用頭盔的要求和試驗方法 |
|
| BS EN 13913-2003 |
鐵路設施.橡膠懸掛部件.彈性體基機械部件 |
(Railway applications - Rubber suspension components - Elastomer-based mechanical parts) |
| BS EN 13914-1-2005 |
外部粉刷和內部粉刷的設計、準備和實施.外部粉刷 |
|
| BS EN 13918-2003 |
氣焊設備.焊接、切割和相關工藝用儲氣瓶上的組合流量計調節器.分類、規范和試驗 |
(Gas welding equipment - Integrated flowmeter regulators used on cylinders for welding, cutting and allied processes - Classification, specification and tests) |
| BS EN 13919-2002 |
天然石材試驗方法.在潮濕環境中二氧化硫的作用下天然石材耐老化的測定 |
(Natural stone test methods - Determination of resistance to ageing by SODOWN2 action in the presence of humidity) |
| BS EN 1392-1998 |
皮革和鞋靴材料用膠粘劑.溶劑膠和分散膠粘劑.特定條件下測量粘合強度的試驗方法 |
(Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Test methods for measuring the bond strength under specified conditions) |
| BS EN 13920-1-2003 |
鋁和鋁合金.廢料.一般要求、取樣和試驗 |
(Aluminium and aluminium alloys - Scrap - General requirements, sampling and tests) |
| BS EN 13920-10-2003 |
鋁和鋁合金.廢料.含鋁制廢飲料罐的廢料 |
(Aluminium and aluminium alloys - Scrap - Scrap consisting of used aluminium beverage cans) |
| BS EN 13920-11-2003 |
鋁和鋁合金.廢料.含鋁銅散熱器的廢料 |
(Aluminium and aluminium alloys - Scrap - Scrap consisting of aluminium-copper radiators) |
| BS EN 13920-12-2003 |
鋁和鋁合金.廢料.含單一合金的車床切屑 |
(Aluminium and aluminium alloys - Scrap - Turnings consisting of one single alloy) |
| BS EN 13920-13-2003 |
鋁和鋁合金.廢料.含兩種或多種合金的混合車床切屑 |
(Aluminium and aluminium alloys - Scrap - Mixed turnings consisting of two or more alloys) |
| BS EN 13920-14-2003 |
鋁和鋁合金.廢料.廢鋁包裝件 |
(Aluminium and aluminium alloys - Scrap - Scrap from post-consumer aluminium packagings) |
| BS EN 13920-15-2003 |
鋁和鋁合金.廢料.廢鋁包裝件中已去除涂層的鋁廢料 |
(Aluminium and aluminium alloys - Scrap - Decoated aluminium scrap from post-consumer aluminium packagings) |
| BS EN 13920-16-2003 |
鋁和鋁合金.廢料.含浮渣、鐵渣、溢出物和金屬粒子的廢料 |
(Aluminium and aluminium alloys - Scrap - Scrap consisting of skimmings, drosses, spills and metallics) |
| BS EN 13920-2-2003 |
鋁和鋁合金.廢料.非合金廢鋁 |
(Aluminium and aluminium alloys - Scrap - Unalloyed aluminium scrap) |
| BS EN 13920-3-2003 |
鋁和鋁合金.廢料.廢金屬絲和電纜 |
(Aluminium and aluminium alloys - Scrap - Wire and cable scrap) |
| BS EN 13920-4-2003 |
鋁和鋁合金.廢料.含單一鍛造合金的廢料 |
(Aluminium and aluminium alloys - Scrap - Scrap consisting of one single wrought alloy) |
| BS EN 13920-5-2003 |
鋁和鋁合金.廢料.含同一系列兩種或多種鍛造合金的廢料 |
(Aluminium and aluminium alloys - Scrap - Scrap consisting of two or more wrought alloys of the same series) |
| BS EN 13920-6-2003 |
鋁和鋁合金.廢料.含兩種或多種鍛造合金的廢料 |
(Aluminium and aluminium alloys - Scrap - Scrap consisting of two or more wrought alloys) |
| BS EN 13920-7-2003 |
鋁和鋁合金.廢料.鑄件廢料 |
(Aluminium and aluminium alloys - Scrap - Scrap consisting of castings) |
| BS EN 13920-8-2003 |
鋁和鋁合金.廢料.為實施鋁分離工藝必須采用粉碎工藝時產生的非鐵材料廢料 |
(Aluminium and aluminium alloys - Scrap - Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes) |
| BS EN 13920-9-2003 |
鋁和鋁合金.廢料.被粉碎的非鐵材料在鋁分離工藝中產生的廢料 |
(Aluminium and aluminium alloys - Scrap - Scrap from aluminium separation processes of non-ferrous shredded materials) |
| BS EN 13922-2003 |
危險物品運輸用罐.罐的輔助設備.液體燃料防溢流系統 |
(Tanks for transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels) |
| BS EN 13925-1-2003 |
無損檢驗.來自多晶和非晶材料的X射線衍射.通用原理 |
(Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - General principles) |
| BS EN 13925-2-2003 |
無損檢驗.來自多晶和非晶材料的X射線衍射.程序 |
(Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Procedures) |
| BS EN 13925-3-2005 |
無損檢驗.多晶和非晶材料的X射線衍射.儀器 |
|
| BS EN 13926-2003 |
表面活性劑.烷氧基衍生物.羥基值的測定.N-甲基咪唑法 |
(Surface active agents - Alkoxylated derivatives - Determination of hydroxyl value - N-methyl imidazole method) |
| BS EN 13927-2003 |
無損檢驗.目視檢驗.設備 |
(Non-destructive testing - Visual testing - Equipment) |
| BS EN 1393-1997 |
塑料管道系統.玻璃增強熱固性塑料(GRP)管.初始徑向拉伸特性的測定 |
(Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial longitudinal tensile properties) |
| BS EN 13938-1-2004 |
民用爆炸物.推進劑和火箭推進劑.要求 |
|
| BS EN 13938-1-2004 |
民用爆炸物.推進劑和火箭推進劑.要求 |
|
| BS EN 13938-2-2004 |
民用爆炸物.推進劑和火箭推進劑.抗靜電能的測定 |
|
| BS EN 13938-2-2004 |
民用爆炸物.推進劑和火箭推進劑.抗靜電能的測定 |
|
| BS EN 13938-3-2003 |
民用爆炸物.推進劑和火箭推進劑.爆燃到爆炸過渡時間的測定 |
(Explosives for civil uses - Propellants and rocket propellants - Determination of deflagration to detonation transition) |
| BS EN 13938-5-2004 |
民用爆炸物.推進劑和火箭推進劑.氣孔和裂縫的測定 |
|
| BS EN 13938-5-2004 |
民用爆炸物.推進劑和火箭推進劑.氣孔和裂縫的測定 |
|
| BS EN 13938-6-2004 |
民用爆炸物.推進劑和火箭推進劑.固態火箭推進劑.抑制劑涂層完整性的測定指南 |
|
| BS EN 13938-7-2004 |
民用爆炸物.推進劑和火箭推進劑.黑火藥特性的測定 |
|
| BS EN 1394-1997 |
塑料管道系統.玻璃纖維增強熱固性塑料(GRP)管.外表初始圓周抗拉強度的測定 |
(Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength) |
| BS EN 13941-2003 |
直接加熱的預絕緣粘結管系統的設計和安裝 |
(Design and installation of preinsulated bonded pipe systems for direct heating) |
| BS EN 13942-2003 |
石油和天然氣工業.管道輸送.管道閥 |
(Petroleum and natural gas industries - Pipeline transportation - Pipeline valves) |
| BS EN 13946-2003 |
水質.河水中底棲硅藻類常規取樣和預處理的指導性標準 |
(Water quality - Guidance standard for the routine sampling and pretreatment of benthic diatoms from rivers) |
| BS EN 13949-2003 |
呼吸設備.與壓縮的Nitrox和氧氣一起使用的開路自主式潛水儀.要求、試驗、標記 |
(Respiratory equipment - Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen - Requirements, testing, marking) |
| BS EN 1395-1996 |
熱噴涂.熱噴涂設備的驗收檢驗 |
(Thermal spraying - Acceptance inspection of thermal spraying equipment) |
| BS EN 13951-2003 |
液泵.安全要求.農產品設備.使用中衛生保證的設計原則 |
(Liquid pumps - Safety requirements - Agrifoodstuffs equipment - Design rules to ensure hygiene in use) |
| BS EN 13952-2003 |
石油液化氣(LPG)罐.填充規程 |
(LPG cylinders - Filling procedures) |
| BS EN 13953-2003 |
液化石油氣(LPG)用移動式可填充儲氣瓶的減壓安全閥 |
(Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)) |
| BS EN 13955-2002 |
表面活性劑.離子型表面活性劑的克拉夫特點和溶解性的測定 |
(Surface active agents - Determination of Krafft point and solubility of ionic surface active agents) |
| BS EN 13956-2005 |
防水用彈性薄板.屋頂防水用塑料和橡膠薄板.定義和特性 |
|
| BS EN 13957-2003 |
鋁和鋁合金.一般用途擠壓圓形盤管.規范 |
(Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification) |
| BS EN 13958-2003 |
鋁和鋁合金.一般用途冷拉圓形盤管.規范 |
(Aluminium and aluminium alloys - Cold drawn, round coiled tube for general applications - Specification) |
| BS EN 1396-1997 |
鋁及鋁合金.一般用途的成卷涂覆薄板和帶材規范 |
(Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications) |
| BS EN 13964-2004 |
吊頂.要求和試驗方法 |
|
| BS EN 13964-2004 |
吊頂.要求和試驗方法 |
|
| BS EN 13965-1-2004 |
廢棄物的特性.術語.材料相關術語和定義 |
|
| BS EN 13965-1-2004 |
廢棄物的特性.術語.材料相關術語和定義 |
|
| BS EN 13965-2-2004 |
廢棄物的特性.術語.管理相關術語和定義 |
|
| BS EN 13966-1-2003 |
液態涂層材料用霧化及噴涂設備輸送效率的測定.平板條 |
(Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials - Flat panels) |
| BS EN 1397-1999 |
熱交換器.液體循環加熱的電扇線圈件.性能穩定性的試驗過程 |
(Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance) |
| BS EN 13970-2005 |
防水用柔性薄板.瀝青水蒸氣控制層.定義和特性 |
|
| BS EN 13971-2003 |
碳酸鹽石灰材料.活性測定.鹽酸的電位滴定法 |
(Carbonate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid) |
| BS EN 13972-2002 |
硬質塑料容器. |
(Rigid plastic containers - Definition of nominal, brimful and total capacity and measurement of brimful and total capacity) |
| BS EN 13973-2002 |
硬質塑料容器.排水能力測定方法 |
(Rigid plastics containers - Method for determination of drainability) |
| BS EN 13974-2002 |
硬質塑料容器.尺寸、重量和體積的公差規范 |
(Rigid plastics containers - Specification of tolerance for dimensions, weight and volume) |
| BS EN 13975-2003 |
實驗室條件下診斷用醫療裝置的驗收試驗用取樣規程.統計特性 |
(Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - Statistical aspects) |
| BS EN 13976-1-2004 |
營救系統.嬰兒保溫箱的運輸.接口條件 |
|
| BS EN 13976-2-2004 |
營救系統.嬰兒保溫箱的運輸.系統要求 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com