標準號 |
中文名稱 |
英文名稱 |
| BS EN 26891-1991 |
木結構.機械緊固件接頭.強度和變形特性測定的一般原則 |
(Timber structures - Joints made with mechanical fasteners - General principles for the determination of strength and deformation characteristics) |
| BS EN 269-1995 |
呼吸保護裝置.包括護罩的動力推動新鮮空氣軟管呼吸裝置規范 |
(Respiratory protective devices - Specification for powered fresh air hose breathing apparatus incorporating a hood) |
| BS EN 26922-1989 |
粘合劑.對接頭抗拉強度的測定 |
(Adhesives - Determination of tensile strength of butt joints) |
| BS EN 26927-1991 |
房屋建造.勾縫用品.密封劑.詞匯 |
(Building construction - Jointing products - Sealants - Vocabulary) |
| BS EN 2693-1994 |
鋁合金.AL-P5086-H111.0.3-6mm的薄板和帶材 |
(Aluminium alloy - AL-P5086-H111 - Sheet and strip 0,3 mm) |
| BS EN 2693-2005 |
航空航天系列.AL-P5086-H111鋁合金.0.3mm≤a≤6mm 薄板和帶材 |
|
| BS EN 2694-1994 |
鋁合金.AL-P6061-T6或T62.寬0.4-6mm的薄板和帶材 |
(Aluminium alloy - AL-P6061-T6 or T62 - Sheet and strip 0,4 mm) |
| BS EN 2694-2005 |
航空航天系列.AL-P6061-T6或T62鋁合金.0.4mm≤a≤6mm 薄板和帶材 |
|
| BS EN 26948-1991 |
自動汽水分離器生產和性能試驗規范 |
(Specification for production and performance characteristic tests for automatic steam traps) |
| BS EN 2695-1994 |
鋁合金.AL-P6081-T6.0.3mm≤a≤6mm的板材和帶材 |
(Aluminium alloy - AL-P6081-T6 - Sheet and strip 0,3 mm) |
| BS EN 2695-2005 |
航空航天系列.AL-P6081-T6鋁合金.0.3mm≤a≤6mm薄板和帶材 |
|
| BS EN 2696-1994 |
鋁合金.AL-P7075-T6或T62.0.4mm≤a≤6mm的板材和帶材 |
(Aluminium alloy - AL-P7075-T6 or T62 - Sheet and strip 0,4 mm) |
| BS EN 2696-2005 |
航空航天系列.AL-P7075-T6或T62鋁合金.0.4mm≤a≤6mm 薄板和帶材 |
|
| BS EN 270-1995 |
呼吸保護裝置.包括防護罩的壓縮空氣導管呼吸裝置.要求、試驗和標志 |
(Respiratory protective devices - Compressed air line breathing apparatus incorporating a hood - Requirements, testing, marking) |
| BS EN 27023-1993 |
包裝袋.檢驗用空袋取樣方法 |
(Packaging - Sacks - Method of sampling empty sacks for testing) |
| BS EN 271-1995 |
呼吸保護設備.噴砂操作用包括防護罩的壓縮空氣導管呼吸裝置或動力推動新鮮空氣軟管呼吸裝置.要求、檢驗和標 |
(Respiratory protective devices - Compressed air line or powered fresh air hose breathing apparatus incorporating a hood for use in abrasive blasting operations - Requirements, testing, marking) |
| BS EN 27201-1-1990 |
防火.滅火介質.鹵代烴.聚四氟乙烯1211和1301的規范 |
(Fire protection - Fire extinguishing media - Halogenated hydrocarbons - Specifications for halon 1211 and halon 1301) |
| BS EN 27201-2-1994 |
防火.滅火用介質.鹵化烴.安全裝卸和運輸過程的實施規范 |
(Fire protection - Fire extinguishing media - Halogenated hydrocarbons - Code of practice for safe handling and transfer procedures) |
| BS EN 27213-1982 |
試驗用紙漿取樣的方法 |
(Method for sampling pulps for testing) |
| BS EN 27243-1994 |
熱環境.根據濕球玻璃溫度計指示數對操作人員熱影響的估算 |
(Hot environments - Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature)) |
| BS EN 27286-1992 |
電阻焊設備用圖形符號 |
(Graphical symbols for resistance welding equipment) |
| BS EN 273-1992 |
木材防腐劑.對竹粉蠹蟲預防作用的測定(實驗室法) |
(Wood preservatives - Determination of the curative action against Lyctus brunneus (Stephens) (laboratory method)) |
| BS EN 27326-1991 |
橡膠和塑料軟管.靜態條件下耐臭氧性的評定 |
(Rubber and plastics hoses - Assessment of ozone resistance under static conditions) |
| BS EN 27372-1992 |
商貿數據交換.商貿數據指南 |
(Trade data interchange - Trade data elements directory) |
| BS EN 27390-1991 |
房層建筑.連接件.耐變形性的測定 |
(Building construction - Jointing products - Determination of resistance to flow) |
| BS EN 274-1-2002 |
衛生器具用下水道管件要求 |
(Waste fitting for sanitary appliances - Requirements) |
| BS EN 274-2-2002 |
衛生器具用下水道管件的試驗方法 |
(Waste fitting for sanitary appliances - Test methods) |
| BS EN 274-3-2002 |
衛生器具用下水道管件的質量控制 |
(Waste fitting for sanitary appliances - Quality control) |
| BS EN 2743-2002 |
航空航天系列.纖維增強塑料.未老化材料測試前整理的標準程序 |
(Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials) |
| BS EN 27434-1992 |
一字槽錐端緊定螺釘 |
(Slotted set screws with cone point) |
| BS EN 27435-1992 |
一字槽長圓柱端緊定螺釘 |
(Slotted set screws with long dog point) |
| BS EN 27436-1992 |
一字槽凹端緊定螺釘 |
(Slotted set screws with cup point) |
| BS EN 2744-1992 |
非金屬材料.優選的試驗溫度 |
(Non-metallic materials - Preferred test temperatures) |
| BS EN 2746-1998 |
玻璃纖維增強塑料.彎曲試驗.三點彎曲法 |
(Glass fibre reinforced plastics - Flexural test - Three point bend method) |
| BS EN 2747-1998 |
玻璃纖維增強塑料.抗拉試驗 |
(Glass fibre reinforced plastics - Tensile test) |
| BS EN 275-1992 |
木材防腐劑.抗水蛀木蟲防護能力的測定 |
(Wood preservatives - Determination of the protective effectiveness against marine borers) |
| BS EN 2752-1990 |
帶鏜孔縮徑系列自鎖固定雙耳系緊螺母的規范.等類:1100MPa/235℃ |
(Specification for nuts, anchor, self locking fixed, two lug, reduced series, with counterbore - Classification: 1100 MPa/235 鳦) |
| BS EN 2753-1996 |
MoS2潤滑的鍍鎘合金鋼制單耳有鏜孔自鎖固定系緊螺母.等級:1100MPa(室溫)/235℃ |
(Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy steel, cadmium plated, MoSDOWN2 lubricated - Classification - 1100 MPa (at ambient temperature) / 235 鳦) |
| BS EN 27627-1-1993 |
硬質金屬.火焰原子吸收光譜法化學分析.第1部分:一般要求 |
(Hardmetals - Chemical analysis by flame atomic absorption spectrometry - General requirements) |
| BS EN 27627-2-1993 |
硬質金屬.用火焰原子吸收光譜法進行化學分析.第2部分:0.001-0.02%(m/m)含量鈣、鉀、鎂和鈉測定 |
(Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 % (m/m)) |
| BS EN 27627-3-1993 |
硬質金屬.用火焰原子吸收光譜法進行化學分析.第3部分:0.01-0.5%(m/m)鈷、鐵、錳和鎳的測定 |
(Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 % (m/m)) |
| BS EN 27627-4-1993 |
硬質金屬.用火焰原子吸收光譜法進行化學分析.第4部分:0.01-0.5%(m/m)含量鉬、鈦和釩的測定 |
(Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 % (m/m)) |
| BS EN 27627-5-1993 |
硬質金屬.用火焰原子吸收光譜法進行化學分析.第5部分:0.5-2%(m/m)含量鈷、鐵、鉬、鎳、鈦和釩的測定 |
(Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 % (m/m)) |
| BS EN 27627-6-1993 |
硬質金屬.用火焰原子吸收光譜法進行化學分析.第6部分:0.01-2.0%(m/m)鉻含量的測定 |
(Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Determination of chromium in contents 0,01 to 2 % (m/m)) |
| BS EN 277-1996 |
食品運輸袋.聚炳烯織物袋 |
(Sacks for the transport of food aid - Sacks made of woven polypropylene fabric) |
| BS EN 27721-1992 |
沉頭螺釘?shù)念^形和測量 |
(Countersunk head screws - Head configuration and gauging) |
| BS EN 27740-1992 |
帶可拆卸刀片的外科手術刀尺寸規范 |
(Specification for dimensions of surgical scalpels with detatchable blades) |
| BS EN 27787-3-1992 |
牙科用旋轉器械.切割工具.第3部分:銑床用硬質合金刀具 |
(Specification for dental rotary instruments - Cutters - Carbide laboratory cutters for milling machines) |
| BS EN 278-1991 |
采用壓力達200毫巴可燃?xì)怏w的家用器具膜片用橡膠材料規范 |
(Specification for rubber materials for diaphragms in domestic appliances using combustible gases up to 200 mbar) |
| BS EN 2781-1998 |
非金屬材料.結構膠粘劑.試驗方法.初始厚度的測定 |
(Non-metallic materials - Structural adhesives - Test methods - Determination of the primer thickness) |
| BS EN 27828-1985 |
水質.生物取樣法.水生海底大型無脊椎動物手網取樣指南 |
(Water quality - Methods for biological testing - Methods of biological sampling: guidance on handnet sampling of aquatic benthic macro-invertebrates) |
| BS EN 27841-1991 |
自動汽水分離器蒸汽損失的測定方法 |
(Methods for determination of steam loss of automatic steam traps) |
| BS EN 27842-1991 |
自動汽水分離器排放量的測定方法 |
(Methods for determination of discharge capacity of automatic steam traps) |
| BS EN 27888-1993 |
水質.電導率測定方法 |
(Water quality - Method for the determination of electrical conductivity) |
| BS EN 279-1991 |
采用壓力達200毫巴可燃?xì)怏w的家用器具靜態密封用均質橡膠材料規范 |
(Specification for homogenous rubber materials for dynamic seals in domestic appliances using combustible gases up to 200 mbar) |
| BS EN 2790-1991 |
帶自潤滑套和嚙合量為1.5雙螺紋PH1的螺紋軸的自動調節滑動軸承連桿可調端頭.尺寸和負載 |
(Rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank with engagement: 1.5 thread - Dimensions and loads) |
| BS EN 2791-1991 |
嚙合量為1.5(雙)螺紋直徑的單叉螺紋軸可調連桿端頭.尺寸和負載 |
(Rod ends, adjustable, single fork and threaded shank with engagement: 1.5 thread diameter - Dimensions and loads) |
| BS EN 2792-1991 |
嚙合量為1.5 |
(Rod ends, adjustable, double fork and threaded shank with engagement: 1.5 thread diameter - Dimensions and loads) |
| BS EN 27931-1992 |
電阻焊設備的絕緣帽和套規范 |
(Specification for insulation caps and bushes for resistance welding equipment) |
| BS EN 2794-003-1999 |
溫度補償?shù)念~定電流為20A至50A的單極電路斷路器.米制螺紋終端.產品標準 |
(Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A. Metric thread terminals - Product standard) |
| BS EN 2794-004-1999 |
溫度補償?shù)念~定電流為20A至50A的單極電路斷路器.UNC螺紋終端.產品標準 |
(Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A. UNC thread terminals - Product standard) |
| BS EN 27941-1994 |
石油及其產品的試驗方法.商用丙烷和丁烷.氣相色譜分析 |
(Methods of test for petroleum and its products - Commercial propane and butane - Analysis by gas chromatography) |
| BS EN 27963-1992 |
超聲波焊縫探傷用2號校驗塊規范 |
(Specification for calibration block No. 2 for ultrasonic examination of welds) |
| BS EN 27965-1-1993 |
包裝袋.第1部分:墜落試驗.紙袋 |
(Packaging - Sacks - Drop test - Paper sacks) |
| BS EN 280-2001 |
移動提升工作臺.設計計算.穩定性標準.建造.安全.檢驗和試驗 |
(Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests) |
| BS EN 28029-1987 |
塑料軟管.織物增強的通用可拆卸水管規范 |
(Plastics hose - General purpose collapsible water hose, textile reinforced - Specification) |
| BS EN 28033-1992 |
橡膠和塑料軟管.零件間粘著力的測定 |
(Rubber and plastics hose - Determination of adhesion between components) |
| BS EN 28049-1992 |
鎳鐵彈丸.抽樣分析 |
(Ferronickel shot - Sampling for analysis) |
| BS EN 28050-1992 |
鎳鐵塊或片.抽樣分析 |
(Ferronickel ingots or pieces - Sampling for analysis) |
| BS EN 28064-1989 |
信息處理.寬12.7mm(0.5in)的磁帶卷盤.規格16、18和22 |
(Information processing - Reels for 12,7 mm (0,5 in) wide magnetic tapes - Sizes 16, 18 and 22) |
| BS EN 2808-1997 |
鈦和鈦合金陽極氧化 |
(Anodizing of titanium and titanium alloys) |
| BS EN 2809-2001 |
航空航天系列.螺母.六角形.槽頭/齒形緊固件,高度降低,常規交叉形,耐熱鋼,鍍銀的緊固件,分級.900MPa |
(Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, silver plated - Classification - 900 MPa (at ambient temperature)/650 鳦) |
| BS EN 28094-1994 |
輸送機用鋼絲簾布輸送帶.涂覆到夾芯層的粘附強度試驗 |
(Steel cord conveyor belts - Adhesion strength test of the cover to the core layer) |
| BS EN 2810-2001 |
航空航天系列.鈍化、耐熱鋼制、標準對邊、高度降低的槽頭/齒形頭六角螺母.等級:900MPa(室溫)/650℃ |
(Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification: 900 MPa (at ambient temperature)/650 鳦) |
| BS EN 28167-1992 |
電阻焊的凸出部位規范 |
(Specification for projections for resistance welding) |
| BS EN 28187-1992 |
家用冷藏冷凍設備.冷藏冷凍箱.性能和試驗方法 |
(Household refrigerating appliances - Refrigerator-freezers - Characteristics and test methods) |
| BS EN 282-1997 |
雪崩警告.發送/接收系統.安全要求和試驗 |
(Avalanche beacons - Transmitter/receiver systems - Safety requirements and testing) |
| BS EN 28206-1992 |
氧氣切割機的驗收試驗.可復現準確度.操作特性 |
(Acceptance tests for oxygen cutting machines - Reproducible accuracy - Operational characteristics) |
| BS EN 28233-1992 |
熱塑性塑料閥門的扭矩試驗方法 |
(Thermoplastics valves - Torque - Test method) |
| BS EN 28265-1989 |
水質.為淺淡水中多石底層上的水底大無脊椎動物而設計和使用定量取樣器 |
(Water quality - Biological methods - Methods of biological sampling: guidance on the design and use of quantitative samplers for benthic macro-invertebrates on stony substrata in shallow freshwater) |
| BS EN 2828-1993 |
拋光金屬涂層的粘結性試驗 |
Adhesion test for metallic coatings by burnishing |
| BS EN 2829-1995 |
用噴丸加工法做金屬覆層的附著力試驗 |
(Adhesion test for metallic coatings by shot peening) |
| BS EN 283-1991 |
交換體.試驗 |
(Swap bodies - Testing) |
| BS EN 2830-1993 |
用剪切法對金屬鍍層的附著試驗 |
(Adhesion test for metallic coatings by shearing action) |
| BS EN 2831-1993 |
鋼的氫脆性.慢速彎曲試驗 |
(Hydrogen embrittlement of steels - Test by slow bending) |
| BS EN 28317-1993 |
防兒童拆卸的包裝.可重復使用包裝件的要求和試驗程序 |
(Child-resistant packaging - Requirements and testing procedures for reclosable packages) |
| BS EN 2832-1993 |
鋼的氫脆性.V切口試件試驗 |
Hydrogen embrittlement of steels - Notched specimen test |
| BS EN 28339-1991 |
房層建筑.連接件.密封劑.抗拉特性的測定 |
Building construction - Jointing products - Sealants - Determination of tensile properties |
| BS EN 28340-1991 |
房層建筑.連接件.保持延伸條件下抗拉特性的測定 |
Building construction - Jointing products - Sealants - Determination of tensile properties at maintained extension |
| BS EN 28362-1-1993 |
注射容器及附件.第1部分:玻璃管注射瓶 |
(Injection containers for injectables and accessories - Injection vials made of glass tubing) |
| BS EN 28362-2-1993 |
注射容器及附件.第2部分:注射瓶的封口 |
(Injection containers for injectables and accessories - Closures for injection vials) |
| BS EN 28362-4-1993 |
注射容器及附件.第4部分:模制玻璃制的注射瓶 |
(Injection containers for injectables and accessories - Injection vials made of moulded glass) |
| BS EN 28394-1991 |
房層建筑.連接件.單組分密封劑可擠壓性的測定 |
(Building construction - Jointing products - Determination of extrudability of one-component sealants) |
| BS EN 284-1992 |
交換體.C級交換體.尺寸和一般要求 |
(Swap bodies - Swap bodies of class C. Dimensions and general requirements) |
| BS EN 28430-1-1992 |
點焊.電極夾具.第1部分:錐形接頭錐度1:10 |
(Specification for resistance spot welding - Electrode holders - Taper fixing 1:10) |
| BS EN 28430-2-1992 |
點焊.電極夾具.第2部分:莫氏錐形接頭 |
(Specification for resistance spot welding - Electrode holders - Morse taper fixing) |
| BS EN 28430-3-1992 |
點焊.電極夾具.第3部分:端推力直柄接頭 |
(Specification for resistance spot welding - Electrode holders - Parallel shank fixing for end thrust) |
| BS EN 28474-1987 |
滿包運輸包裝件.耐浸水的性能測定方法 |
(Complete, filled transport packages - Method for determination of resistance to immersion in water) |
| BS EN 285-1997 |
清毒.蒸汽消毒器.大型消毒器 |
(Sterilization - Steam sterilizers - Large sterilizers) |
| BS EN 2851-1992 |
除發動機外的零部件和組件的標志.圖紙上表示 |
(Marking of parts and assemblies other than engines - Indications on drawings) |
| BS EN 28510-1-1991 |
膠粘劑.軟料與硬料粘合試樣組件剝離試驗.90°剝離 |
(Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - 90 ?Peel) |
| BS EN 28510-2-1991 |
膠粘劑.軟料與硬料粘合試樣組件剝離試驗.180°剝離 |
(Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Adhesives - Peel test for a flexible-bonded to-rigid test specimen assembly - 180 ?Peel) |
| BS EN 2858-1-1994 |
鈦和鈦合金鍛坯和鍛件技術規范.第1部分:一般要求 |
(Titanium and titanium alloys - Forging stock and forgings - Technical specifications - General requirements) |
| BS EN 2858-2-1994 |
鈦和鈦合金鍛坯和鍛件技術規范.第2部分:鍛坯 |
(Titanium and titanium alloys - Forging stock and forgings - Technical specification - Forging stock) |
| BS EN 2858-3-1994 |
鈦和鈦合金鍛坯和鍛件技術規范.第3部分:預行生產鍛件和生產鍛件 |
(Titanium and titanium alloys - Forging stock and forgings - Technical specifications - Pre-production and production forgings) |
| BS EN 2859-1995 |
鍍鎘合金鋼制標準六角頭緊公差標準柄短螺紋螺栓.等級:1100MPa(室溫)/235℃ |
(Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 鳦) |
| BS EN 286-1-1998 |
專用于空氣或氮?dú)獾暮唵畏鞘芑饓毫θ萜?一般用途壓力容器 |
Simple unfired pressure vessels designed to contain air or nitrogen - Pressure vessels for general purposes |
| BS EN 286-2-1992 |
裝空氣或氮?dú)庥煤唵尾挥没鸺訜岬膲毫θ萜?汽車和拖車氣動剎車和輔助系統用壓力容器規范 |
(Simple unfired pressure vessels designed to contain air or nitrogen - Specification for pressure vessels for air braking and auxiliary systems for motor vehicles and their trailers) |
| BS EN 286-3-1995 |
裝空氣或氮?dú)庥玫牟唤鸬囊话銐毫θ萜?第3部分:用于鐵路運輸車輛空氣制動和輔助氣動設備的鋼制壓力容器 |
(Simple unfired pressure vessels designed to contain air or nitrogen - Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock) |
| BS EN 286-4-1995 |
裝空氣或氮?dú)庥玫牟唤鸬囊话銐毫θ萜?第4部分:用于鐵路運輸車輛空氣制動和輔助氣動設備的鋁合金壓力容器 |
(Simple unfired pressure vessels designed to contain air or nitrogen - Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock) |
| BS EN 28601-1989 |
信息交換中日期和時間表示規范 |
(Specification for representation of dates and times in information interchange) |
| BS EN 28630-1-1988 |
使用13262次磁通變換/弧度在每側80磁道上調頻錄制的數據交換用130mm(5.25in)盒式軟磁盤的制作和使用指南.尺 |
(Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange, using modified frequency modulation recording at 13 262 ftprad, on 80 tracks each side - Dimensional, p) |
| BS EN 28630-2-1988 |
使用13262次磁通變換/弧度在每側80磁道上調頻錄制的數據交換130mm(5.25in)盒式軟磁盤的制作和使用指南.77磁 |
(Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange, using modified frequency modulation recording at 13 262 ftprad, on 80 tracks each side - Track format A) |
| BS EN 28630-3-1988 |
使用13262次磁通變換/弧度在每側80磁道上調頻錄制的數據交換130mm(5.25in)盒式軟磁盤的制作和使用指南.80磁 |
(Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange, using modified frequency modulation recording at 13 262 ftprad, on 80 tracks each side - Track format B) |
| BS EN 28653-1993 |
珠寶.戒指尺寸.定義.測量和命名 |
(Jewellery - Ring-sizes - Definition, measurement and designation) |
| BS EN 28654-1993 |
金合金的顏色.顏色和命名的定義和范圍 |
(Colours of gold alloys - Definition, range of colours and designation) |
| BS EN 28659-1992 |
熱塑性塑料閥門.疲勞強度.試驗方法 |
(Thermoplastics valves - Fatigue strength - Test method) |
| BS EN 28662-1-1993 |
手持式便攜電動工具.手柄振動測量.總則 |
(Hand-held portable power tools - Measurement of vibrations at the handle - General) |
| BS EN 28662-2-1995 |
手持便攜電動工具.手柄振動測量.鑿錘和鉚錘 |
(Hand-held portable power tools - Measurement of vibrations at the handle - Chipping hammers and riveting hammers) |
| BS EN 28662-3-1995 |
手持便攜電動工具.手柄振動測量.巖石鉆和旋轉錘頭 |
(Hand-held portable power tools - Measurement of vibrations at the handle - Rock drills and rotary hammers) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com