標準號 |
中文名稱 |
英文名稱 |
| BS EN 1778-2000 |
焊接熱塑結構特征值.熱塑設備的設計模和可允許應力的測定 |
(Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment) |
| BS EN 1779-1999 |
無損檢驗.漏泄試驗.方法和技術選擇標準 |
(Non-destructive testing - Leak testing - Criteria for method and technique selection) |
| BS EN 1780-1-2002 |
鋁和鋁合金.再熔、母合金和鑄件的非合金和合金鋁錠的命名.數字命名系統 |
(Aluminium and aluminium alloys - Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings - Numerical designation system) |
| BS EN 1780-2-2002 |
鋁和鋁合金.再熔、母合金和鑄件的非合金和合金鋁錠的命名.基于化學符號的命名系統 |
(Aluminium and aluminium alloys - Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings - Chemical symbol based designation system) |
| BS EN 1780-3-2002 |
鋁和鋁合金.再熔、母合金和鑄件的非合金和合金鋁錠的命名.化學成份的書寫規則 |
(Aluminium and aluminium alloys - Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings - Writing rules for chemical composition) |
| BS EN 1782-1998 |
氣管導管和連接器 |
(Tracheal tubes and connectors) |
| BS EN 1783-1997 |
火柴.性能要求、安全和分類 |
(Matches - Performance requirements, safety and classification) |
| BS EN 1784-2003 |
食品.經過照射處理含脂肪的食品的檢測.碳?xì)浠衔锏臍庀嗌V分析 |
(Foodstuffs - Detection of irradiated food containing fat - Gas chromatographic analysis of hydrocarbons) |
| BS EN 1785-2003 |
食品.經過照射處理含脂肪食品的檢測.2烷基環丁酮的氣相色譜/質譜分析 |
(Foodstuffs - Detection of irradiated food containing fat - Gas chromatographic/mass spectrometric analysis of 2-alkylcyclobutanones) |
| BS EN 1786-1997 |
食品.電子自旋共振光譜儀對含骨食品的輻射檢驗 |
(Foodstuffs - Detection of irradiated food containing bone - Method by ESR spectroscopy) |
| BS EN 1787-2000 |
食物.ESR光譜法檢測含纖維素經過輻射的食品 |
(Foodstuffs - Detection of irradiated food containing cellulose by ESR spectroscopy) |
| BS EN 1788-2001 |
食品.可與硅酸鹽礦物隔絕的輻照食品的熱致發光檢測 |
(Foodstuffs - Thermoluminescence detection of irradiated food from which silicate minerals can be isolated) |
| BS EN 1789-2000 |
醫用車輛和其設備.道路救護車 |
(Medical vehicles and their equipment - Road ambulances) |
| BS EN 179-1998 |
建筑硬件.由水平把手或推板控制的緊急出口裝置.要求和試驗方法 |
(Building hardware - Emergency exit devices operated by a lever handle or push pad - Requirements and test methods) |
| BS EN 1790-1998 |
道路標記材料.預制道路標記 |
(Road marking materials - Preformed road markings) |
| BS EN 1791-1997 |
表面活性劑.脂肪烷基乙烷胺氧化物.胺氧化物含量測定 |
(Surface active agents - Fatty alkyl dimethyl amine oxides - Determination of the amine oxide content) |
| BS EN 1792-2003 |
焊接.焊接和相關工藝術語的多語種對照表 |
(Welding - Multilingual list of terms for welding and related processes) |
| BS EN 1793-1-1998 |
道路交通阻塞噪音減低裝置.測定聲學性能的試驗方法.聲音吸收的內在特性 |
(Road traffic noise reducing devices - Test method for determining the acoustic performance - Intrinsic characteristics of sound absorption) |
| BS EN 1793-2-1998 |
道路交通的噪音減低系統.聲學性能測定的試驗方法.空載聲隔絕的固有特性 |
(Road traffic noise reducing devices - Test method for determining the acoustic performance - Intrinsic characteristics of airborne sound insulation) |
| BS EN 1793-3-1998 |
道路交通的噪音減低系統.聲學性能測定的試驗方法.標準化交通噪音頻譜 |
(Road traffic noise reducing devices - Test method for determining the acoustic performance - Normalized traffic noise spectrum) |
| BS EN 1794-1-2003 |
道路交通噪聲降低設備.非聲學性能.機械性能和穩定性要求 |
(Road traffic noise reducing devices - Non-acoustic performance - Mechanical performance and stability requirements) |
| BS EN 1795-1998 |
可移動煤氣罐(不含LPG).煤氣服務政策的改變步驟 |
(Transportable gas cylinders (excluding LPG) - Procedures for change of gas service) |
| BS EN 1797-1-1998 |
低溫容器.氣體/材料可混用性.氧可混用性 |
(Cryogenic vessels - Gas/material compatibility - Oxygen compatibility) |
| BS EN 1797-2001 |
低溫容器.氣體/材料可混用性 |
(Cryogenic vessels - Gas/material compatibility) |
| BS EN 1799-1999 |
混凝土結構的防護和修理的產品和系統.試驗方法.應用于混凝土表面的結構膠粘劑的適應性的測量方法 |
(Products and systems for the protection and repair of concrete structures - Test methods - Tests to measure the suitability of structural bonding agents for application to concrete surface) |
| BS EN 1800-1999 |
可移動氣瓶.乙炔瓶.基本要求和定義 |
(Transportable gas cylinders - Acetylene cylinders - Basic requirements and definitions) |
| BS EN 1801-1999 |
可移動鋼瓶.單乙炔瓶的填充條件 |
(Transportable gas cylinders - Filling conditions for single acetylene cylinders) |
| BS EN 180101-1995 |
電子器件質量評定協調體系規范.固定光纖衰減器空白詳細規范 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification: fixed fibre optic attenuators) |
| BS EN 1802-2002 |
可運輸儲氣瓶.無縫鋁合金儲氣瓶的周期性檢驗和測試 |
(Transportable gas cylinders - Periodic inspection and testing of seamless aluminium alloy gas cylinders) |
| BS EN 1803-2002 |
可運輸儲氣瓶.焊接炭素鋼儲氣瓶的周期性檢驗和測試 |
(Transportable gas cylinders - Periodic inspection and testing of welded carbon steel gas cylinders) |
| BS EN 1804-1-2002 |
地礦機械.液壓礦頂支撐物的安全要求.支撐裝置及一般要求 |
(Machines for underground mines - Safety requirements for hydraulic powered roof supports - Support units and general requirements) |
| BS EN 1806-2000 |
煙囪.單壁粘土/陶瓷煙道磚塊.要求和試驗方法 |
(Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods) |
| BS EN 1807-1999 |
木工機械的安全.帶鋸機械 |
(Safety of woodworking machines - Band sawing machines) |
| BS EN 1808-1999 |
懸吊設備的安全性要求.設計計算、穩定性標準和結構.試驗 |
(Safety requirements on suspended access equipment - Design calculations, stability criteria, construction - Tests) |
| BS EN 1809-1998 |
潛水附件.浮力補償器.功能和安全要求.試驗方法 |
(Diving accessories - Buoyancy compensators - Functional and safety requirements, test methods) |
| BS EN 1810-1998 |
體穿孔后用組件.火焰原子吸收分光光度法測定鎳含量的參考試驗方法 |
(Body-piercing post assemblies - Reference test method for determination of nickel content by flame atomic absorption spectrometry) |
| BS EN 181000-1995 |
電子件用質量評定協調系統.總規范.纖維光學分流裝置 |
(Harmonized system of quality assessment for electronic components - Generic specification - Fibre optic branching devices) |
| BS EN 1811-1999 |
由直接和延長與皮膚接觸的產品中鎳釋放的參考試驗方法 |
(Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin) |
| BS EN 181101-1995 |
電子器件質量評定協調體系.光纖分路器件的空白詳細規范.型號:非波長選擇的星形、發射分光離器/連光器 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification: fibre optic branching devices - Type: non wavelength selective transmissive star) |
| BS EN 181102-1995 |
光纖分路器件的空白詳細規范.型號:非波長選擇的星形、多路調制/解調制器 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification: fibre optic branching devices - Type: wavelength selective transmission star) |
| BS EN 181103-1998 |
電子件質量評估的協調系統.空白詳細規范.光纖分支裝置.型號:電信應用的非波長選擇傳輸星型三相繞阻 |
(Harmonized system of quality assessment for electronic components - Blank detail specification: fibre optic branching devices - Type: non wavelength selective transmissive star for telecommunication a) |
| BS EN 181104-1998 |
電子件質量評估的協調系統.空白詳細規范.光纖分支裝置.型號:電信應用的波長選擇傳輸星型三相繞阻 |
(Harmonized system of quality assessment for electronic components - Blank detail specification: fibre optic branching devices - Type: wavelength selective transmissive star for telecommunication appli) |
| BS EN 1813-1998 |
鋪地織物.用耐蘑機械對羊毛織物完整性的測定 |
(Textile floor coverings - Determination of wool fibre integrity using an abrasion machine) |
| BS EN 1814-1998 |
織物地板鋪面.用改良威特曼鼓試驗測定抗在剪切邊角上的損害力 |
(Textile floor coverings - Determination of resistance to damage at cut edges using the modified Vettermann drum test) |
| BS EN 1814-2005 |
鋪地織物.用改良威特曼鼓試驗測定在剪邊處的抗損壞性 |
|
| BS EN 1815-1998 |
彈性和織物地板鋪面.靜電性能評估 |
(Resilient and textile floor coverings - Assessment of static electrical propensity) |
| BS EN 1816-1998 |
彈性地板覆蓋物.帶有泡沫背面的相同和不同種光滑橡膠地板覆蓋物規范 |
(Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing) |
| BS EN 1817-1998 |
彈性地板覆蓋物.相同和不同種光滑橡膠地板覆蓋物規范 |
(Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings) |
| BS EN 1818-1999 |
彈性地板覆蓋物.承載重小腳輪效果的測定 |
(Resilient floor coverings - Determination of the effect of loaded heavy duty castors) |
| BS EN 1820-1997 |
麻醉儲藏袋 |
(Anaesthetic reservoir bags) |
| BS EN 1821-1-1997 |
電動道路車輛.道路運行能力的測量.純電動車輛 |
(Electrically propelled road vehicles - Measurement of road operating ability - Pure electric vehicles) |
| BS EN 1821-2-1999 |
電動道路車輛.道路運行能力的測量.熱電動復合動力車 |
(Electrically propelled road vehicles - Measurement of road operating ability - Thermal electric hybrid vehicles) |
| BS EN 1822-1-1998 |
高效空氣過濾器(HEPA和ULPA).分類、性能試驗和標記 |
(High efficiency air filters (HEPA and ULPA) - Classification, performance testing, marking) |
| BS EN 1822-2-1998 |
高效空氣過濾器(HEPA和ULPA).氣溶膠產品、測量設備、粒子計數統計 |
(High efficiency air filters (HEPA and ULPA) - Aerosol production, measuring equipment, particle counting statistics) |
| BS EN 1822-3-1998 |
高效空氣過濾器(HEPA和ULPA).試驗扁平片狀過濾媒介 |
(High efficiency air filters (HEPA and ULPA) - Testing flat sheet filter media) |
| BS EN 1822-4-2000 |
高效空氣過濾器(HEPA和ULPA).過濾器件泄漏性的測定 |
(High efficiency air filters (HEPA and ULPA) - Determining leakage of filter element (scan method)) |
| BS EN 1822-5-2000 |
高效空氣過濾器(HEPA和ULPA).過濾器件的效率測定 |
(High efficiency air filters (HEPA and ULPA) - Determining the efficiency of filter element) |
| BS EN 1824-1998 |
道路標記材料.道路試驗 |
(Road marking materials - Road trials) |
| BS EN 1825-2-2002 |
油脂分離器.標準尺寸的選擇、安裝、操作和維護 |
(Grease separators - Selection of nominal size, installation, operation and maintenance) |
| BS EN 1826-1997 |
生物工藝學.大比例方法和生產.原材料監督控制方法 |
(Biotechnology - Large-scale process and production - Control procedures for raw materials) |
| BS EN 1827-1999 |
呼吸保護裝置.防氣體或氣體和微�；蛑环牢⒘５臒o吸氣閥和帶分離式過濾器的半面罩.要求、試驗和標記 |
(Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking) |
| BS EN 1828-2002 |
健康信息.外科程序用分類和編碼系統的目錄結構 |
(Health informatics - Categorial structure for classifications and coding systems of surgical procedures) |
| BS EN 1834-1-2000 |
往復式內燃發動機.用在潛在爆炸氣體環境下發動機結構和設計的安全要求.用在可燃?xì)怏w和蒸氣環境的II組發動機 |
(Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Group II engines for use in flammable gas and vapo) |
| BS EN 1834-2-2000 |
往復式內燃發動機.用在潛在爆炸氣體環境下發動機結構和設計的安全要求.用在地下工作時對沼氣和/或可燃性塵 |
(Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Group I engines for use in underground workings su) |
| BS EN 1834-3-2000 |
往復式內燃發動機.用在潛在爆炸氣體環境下發動機結構和設計的安全要求.用在可燃灰塵環境下的II組發動機 |
(Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Group II engines for use in flammable dust atmosph) |
| BS EN 1835-2000 |
呼吸保護裝置.連接頭盔和頭罩的輕型結構壓縮空氣的線狀呼吸裝置.要求,試驗,標記 |
(Respiratory protective devices - Light duty construction compressed air line breathing apparatus incorporating a helmet or a hood - Requirements, testing, marking) |
| BS EN 1836-1997 |
個人眼睛防護.常規使用的太陽鏡和濾光鏡 |
(Personal eye protection - Sunglasses and sunglare filters for general use) |
| BS EN 1837-1999 |
機械的安全.機械的整體照明 |
(Safety of machinery - Integral lighting of machines) |
| BS EN 1838-1999 |
照明設備.應急燈 |
(Lighting applications - Emergency lighting) |
| BS EN 1839-2004 |
氣體和蒸氣爆炸極限的測定 |
|
| BS EN 1841-1999 |
膠粘劑.地板覆蓋物和墻壁覆蓋物用膠粘劑的試驗方法.與膠粘劑粘接的油氈地板覆蓋物尺寸變化的測定 |
(Adhesives - Test methods for floor coverings and wall coverings - Determination of dimensional changes of a linoleum floor covering in contact with an adhesive) |
| BS EN 1842-1997 |
塑料.熱固性聚合物(SMC-BMC).壓制�？s測定 |
(Plastics - Thermoset moulding compounds (SMC-BMC) - Determination of compression moulding shrinkage) |
| BS EN 1844-2001 |
防水軟板.耐臭氧性測定.屋頂防水用塑料和橡膠薄板 |
(Flexible sheets for waterproofing - Determination of resistance to ozone - Plastic and rubber sheets for roof waterproofing) |
| BS EN 1845-1999 |
制靴機械.靴模機.安全要求 |
(Footwear manufacturing machines - Footwear moulding machines - Safety requirements) |
| BS EN 1846-1-1998 |
消防車和救援車.命名和名稱與符號 |
(Firefighting and rescue service vehicles - Nomenclature and designation) |
| BS EN 1846-2-2002 |
消防車和救援車.安全和性能的一般要求 |
(Firefighting and rescue service vehicles - Common requirements - Safety and performance) |
| BS EN 1846-3-2004 |
消防車和救援車.固定安裝設備.安全和性能 |
|
| BS EN 1847-2001 |
防水柔性層.防水塑料和橡膠片.暴露于液體化學藥品包括水的方法 |
(Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Methods for exposure to liquid chemicals including water) |
| BS EN 1848-1-2000 |
防水柔性板.長度,寬度和垂直度的測定.屋頂防水用瀝青板 |
(Flexible sheets for waterproofing - Determination of length, width and straightness - Bitumen sheets for roof waterproofing) |
| BS EN 1848-2-2001 |
防水軟板.長度、寬度和平直度的測定.屋頂防水用塑料和橡膠薄板 |
(Flexible sheets for waterproofing - Determination of length, width and straightness - Plastic and rubber sheets for roof waterproofing) |
| BS EN 1849-1-2000 |
防水柔性板.厚度和單位面積質量的測定.屋頂防水用瀝青板 |
(Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Bitumen sheets for roof waterproofing) |
| BS EN 1849-2-2001 |
防水軟板.厚度和單位面積質量的測定.屋頂防水用塑料和橡膠薄板 |
(Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Plastic and rubber sheets for roof waterproofing) |
| BS EN 1850-1-2000 |
防水柔性板.可視缺陷的測定.屋頂防水用瀝青板 |
(Flexible sheets for waterproofing - Determination of visible defects - Bitumen sheets for roof waterproofing) |
| BS EN 1850-2-2001 |
防水軟板.可視缺陷的測定.屋頂防水用塑料和橡膠薄板 |
(Flexible sheets for waterproofing - Determination of visible defects - Plastic and rubber sheets for roof waterproofing) |
| BS EN 1852-1-1998 |
無壓地下排水管和下水道用塑料管道系統.聚丙烯(PP).管道,管配件及系統用規范 |
(Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Specifications for pipes, fittings and the system) |
| BS EN 1853-1999 |
農業機械.帶傾卸車身的掛車.安全 |
(Agricultural machinery - Trailers with tipping body - Safety) |
| BS EN 1854-1997 |
氣燃器和氣燃器具的壓力感受裝置 |
Pressure sensing devices for gas burners and gas burning appliances |
| BS EN 1856-1-2003 |
煙囪.金屬煙囪的要求.系統煙囪產品 |
(Chimneys - Requirements for metal chimneys - System chimney products) |
| BS EN 1857-2003 |
煙囪.組件.混凝土煙道襯塊 |
(Chimneys - Components - Concrete flue liners) |
| BS EN 1858-2003 |
煙囪.組件.混凝土煙道磚 |
(Chimneys - Components - Concrete flue blocks) |
| BS EN 1859-2000 |
煙囪.金屬煙囪.試驗方法 |
(Chimneys - Metal chimneys - Test methods) |
| BS EN 1860-1-2003 |
燒烤用器具、固體燃料和點火器.燒烤用固體燃料.要求和試驗方法 |
(Appliances, solid fuels and firelighters for barbecueing - Barbecues burning solid fuels - Requirements and test methods) |
| BS EN 1860-2-2005 |
燒烤用器具、固體燃料和點火器.燒烤木炭和燒烤木炭成型煤.要求和試驗方法 |
|
| BS EN 1860-3-2003 |
燒烤用器具、固體燃料和點火器.燒烤用固體燃料點燃用點火器.要求和試驗方法 |
(Appliances, solid fuels and firelighters for barbecueing - Firelighters for igniting solid fuels for use in barbecue appliances - Requirements and test methods) |
| BS EN 186000-1-1994 |
電子器件的質量評定協調系統.光纖和光纜的連接設備.總規范.要求,試驗方法和合格批準程序 |
(Harmonized system of quality assessment for electronic components - Generic specification - Connector sets for optical fibres and cables - Requirements, test methods and qualification approval procedu) |
| BS EN 186001-1994 |
電子氣件質量評定協調體系.空白詳細規范.光纖和光纜連接器空白詳細規范.Ⅰ類環境 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification - Connectors for optical fibres and cables - Environmental category I) |
| BS EN 186002-1994 |
電子電氣器件質量評定體系.光纖和光纜連接器空白詳細規范.II類環境 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification - Connector for optical fibres and cables - Environmental category II) |
| BS EN 186003-1994 |
電子電氣器件質量評定體系.光纖和光纜連接器空白詳細規范.III類環境 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification - Connector for optical fibres and cables - Environmental category III) |
| BS EN 186004-1994 |
電子電氣器件質量評定體系.光纖和光纜連接器空白詳細規范.IV類環境 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification - Connector for optical fibres and cables - Environmental category IV) |
| BS EN 186005-1994 |
電子電氣器件質量評定體系.光纖和光纜連接器空白詳細規范.V類環境 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification - Connector for optical fibres and cables - Environmental category V) |
| BS EN 186006-1-1996 |
電子件的質量評定協調體系.空白詳細規范.軍用光纖和光纜連接器.環境等級VI |
(Harmonized system of quality assessment for electronic components - Blank detail specification - Connectors for optical fibres and cables for military use - Environmental category VI) |
| BS EN 1861-1998 |
制冷系統和熱泵.系統流量圖,管道和設備圖.布局和符號 |
(Refrigerating systems and heat pumps - System flow diagrams and piping and instrument diagrams - Layout and symbols) |
| BS EN 186100-1995 |
電子器件質量評定體系.光纖光纜連接器件分規范.F-SMA型 |
(Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Types F-SMA) |
| BS EN 186110-1995 |
電子器件質量評定體系.光纖光纜連接器件分規范.FC型 |
(Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type FC) |
| BS EN 186130-1996 |
電子件的質量評定體系.LSA型光纖和光纜連接器裝置分規范 |
(Harmonized system of quality assessment for electronic components - Sectional specification - Connector sets for optical fibres and cables - Type LSA) |
| BS EN 186150-1997 |
OCCA-BU型光學纖維織物和電纜用連接器成套設備 |
(Connector sets for optical fibres and cables - Type OCCA-BU) |
| BS EN 186160-1997 |
OCCA-PC型光學纖維織物和電纜用連接器成套設備 |
(Connector sets for optical fibres and cables - Type OCCA-PC) |
| BS EN 186170-1998 |
電子電氣器件質量評定體系.分規范.光纖和電纜連接裝置.RCC型 |
(Harmonized system of quality assessment for electronic components - Sectional specification:connector sets for optical fibres and cables - Type RCC) |
| BS EN 186180-1996 |
電子件的質量評定體系.LSB型光纖和光纜連接器裝置分規范 |
(Harmonized system of quality assessment for electronic components - Sectional specification - Connector sets for optical fibres and cables - Type LSB) |
| BS EN 1862-1998 |
塑料管道系統.玻璃增強熱固塑料管(GRP).暴露于化學環境的隨后相關蠕變因子的測定 |
(Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the relative flexural creep factor following exposure to a chemical environment) |
| BS EN 186210-1996 |
電子件質量評定協調體系.分規范:光纖和光纜用連接裝置.CF08型 |
(Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type CF08) |
| BS EN 186220-1996 |
電子件的質量評定體系.LSC型光纖和光纜連接器裝置分規范 |
(Harmonized system of quality assessment for electronic components - Sectional specification: Connector sets for optical fibres and cables - Type LSC) |
| BS EN 186230-1996 |
電子件的質量評定體系.LSF型光纖和光纜連接器裝置分規范 |
(Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type LSF) |
| BS EN 186240-1996 |
光纖和光纜用MT型連接器組分規范 |
(Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type MT) |
| BS EN 186260-1998 |
電子器件質量評定協調體系.分規范:光纖和電纜連接件.SC型 |
(Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type SC) |
| BS EN 186270-1998 |
電子器件質量評定協調體系.分規范:光纖和電纜連接件.LSH型 |
(Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type LSH) |
| BS EN 186290-1998 |
電子器件質量評定協調體系.光纖和電纜連接件.MPO型 |
(Harmonized system of quality assessment for electronic components - Connector sets for optical fibres and cables - Type MPO) |
| BS EN 1863-1-2000 |
建筑物用玻璃.熱增強鈉鈣玻璃.定義和說明 |
(Glass in buildings - Heat strengthened soda lime silicate glass - Definition and description) |
| BS EN 1863-2-2004 |
建筑玻璃.熱增強鈉鈣玻璃.合格評價.產品標準 |
|
| BS EN 1863-2-2004 |
建筑玻璃.熱增強鈉鈣玻璃.合格評價.產品標準 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com