標準號 |
中文名稱 |
英文名稱 |
| BS 6955-13-1994 |
振動和沖擊傳感器的校正.基本應變靈敏度的試驗方法 |
(Calibration of vibration and shock pick-ups - Method of test for base strain sensitivity) |
| BS 6955-14-1994 |
振動和沖擊傳感器的校正.鋼滑輪上的無衰減加速度計的共振頻率的試驗方法 |
(Calibration of vibration and shock pick-ups - Method of test for resonance frequency of undamped accelerometers on a steel block) |
| BS 6955-15-1994 |
振動和沖擊傳感器的校正.聲學靈敏度的試驗方法 |
(Calibration of vibration and shock pick-ups - Method of test for acoustic sensitivity) |
| BS 6955-16-1994 |
振動和沖擊傳感器的校正.安裝扭矩靈敏度的試驗方法 |
(Calibration of vibration and shock pick-ups - Method of test for mounting torque sensitivity) |
| BS 6955-17-1994 |
振動和沖擊傳感器的校正.固定溫度靈敏度的試驗方法 |
(Calibration of vibration and shock pick-ups - Method of test for fixed temperature sensitivity) |
| BS 6955-18-1994 |
振動和沖擊傳感器的校正.瞬變溫度靈敏度的檢測方法 |
(Calibration of vibration and shock pick-ups - Method of test for transient temperature sensitivity) |
| BS 6955-19-1994 |
振動和沖擊傳感器的校正.磁場靈敏度的試驗方法 |
(Calibration of vibration and shock pick-ups - Method of test for magnetic field sensitivity) |
| BS 6955-1994 |
振動和沖擊傳感器的校正.磁場靈敏度的試驗方法 |
(Calibration of vibration and shock pick-ups. Method of test for magnetic field sensitivity) |
| BS 6955-2-1994 |
振動和沖擊傳感器的校正.主沖擊的輕切校正法 |
(Calibration of vibration and shock pick-ups - Methods for primary shock calibration by light cutting) |
| BS 6955-22-1997 |
振動和沖擊拾音器的校正.加速度計共振試驗.一般方法 |
(Calibration of vibration and shock pick-ups - Accelerometer resonance testing - General methods) |
| BS 6955-4-1994 |
振動和沖擊傳感器的校正.二級沖擊的校正法 |
(Calibration of vibration and shock pick-ups - Method for secondary shock calibration) |
| BS 6955-5-1994 |
振動和沖擊傳感器的校正.地球引力引起的振動和沖擊的校正法 |
(Calibration of vibration and shock pick-ups - Method for calibration by earth’s gravitation) |
| BS 6955-6-1994 |
振動和沖擊傳感器的校正.一級振動的低頻校正法 |
(Calibration of vibration and shock pick-ups - Method for primary vibration calibration at low frequencies) |
| BS 6955-7-1994 |
振動和沖擊傳感器的校正.離心力引起的振動和沖擊的初級校正方法 |
(Calibration of vibration and shock pick-ups - Methods for primary calibration by centrifuge) |
| BS 6955-8-1994 |
振動和沖擊傳感器的校正.雙離心力引起的振動和沖擊的初級校正方法 |
(Calibration of vibration and shock pick-ups - Method for primary calibration by dual centrifuge) |
| BS 6955-9-1994 |
振動和沖擊傳感器的校正.相角引起的二級振動的校正方法 |
(Calibration of vibration and shock pick-ups - Method for secondary vibration calibration by comparison of phase angles) |
| BS 6956-1-1988 |
接合材料和化合物.波形金屬接合環規范 |
(Jointing materials and compounds - Specification for corrugated metal joint rings) |
| BS 6956-5-1992 |
接合材料和化合物.用于水、低壓飽和蒸汽的接合材料和化合物規范.一類燃氣(不包括煤氣)和二類燃氣 |
(Jointing materials and compounds - Specification for jointing compounds for use with water, low pressure saturated steam, 1st family gases (excluding coal gas) and 2nd family gases) |
| BS 6958-1-1988 |
用改進的頻率調制在每面80磁道上以7958磁通變換/弧度(ftprad)、5.3tpmm(135tpi)記錄的數據交換用90mm(3.5in |
(Guide to construction and use of 90 mm (3.5 in) flexible disk cartridges for data interchange, using modified frequency modulation recording at 7958 ftprad, 5.3 tpmm (135 tpi) on 80 tracks on each sid) |
| BS 6958-2-1988 |
用改進的頻率調制在每面80磁道上以7958磁通變換/弧度(ftprad)、5.3tpmm(135tpi)記錄的數據交換用90mm(3.5in |
(Guide to construction and use of 90 mm (3.5 in) flexible disk cartridges for data interchange, using modified frequency modulation recording at 7958 ftprad, 5.3 tpmm (135 tpi) on 80 tracks on each sid) |
| BS 696-1-1989 |
牛奶和牛奶制品中脂肪含量的測定(蓋爾伯法).第1部分:儀器規范 |
(Determination of fat content of milk and milk products (Gerber method) - Specification for apparatus) |
| BS 696-2-1989 |
牛奶和牛奶制品中脂肪含量的測定(蓋爾伯法).第2部分:方法 |
(Determination of fat content of milk and milk products (Gerber method) - Methods) |
| BS 6965-1-1988 |
箱用紙板的折皺性能.90°折疊的折痕恢復的測定方法 |
(Creasing properties of carton board - Method for determination of crease recovery (spring back) of 90 ?fold) |
| BS 697-1986 |
電工用橡膠手套規范 |
(Specification for rubber gloves for electrical purposes) |
| BS 6972-1988 |
家用、輕工業及商用的照明器支承耦合器的一般要求規范 |
(Specification for general requirements for luminaire supporting couplers for domestic, light industrial and commercial use) |
| BS 6978-1-1988 |
播種機.第1部分:單粒播種機的試驗方法 |
(Seed drills - Methods of test for single seed drills) |
| BS 6978-2-1990 |
播種機.第2部分:行列式條播機試驗方法 |
(Seed drills - Methods of test for seed drills for rows) |
| BS 6979-1989 |
機動壓力機的靜載撓度的測量方法 |
(Method for measurement of static deflection of power presses) |
| BS 6981-1988 |
羊毛含酸量的測定方法 |
(Method for determination of acid content of wool) |
| BS 6986-1-1988 |
速溶茶的分析.第1部分:取樣方法 |
(Analysis of instant tea - Methods of sampling) |
| BS 6986-2-1988 |
速溶茶的分析.第2部分:散裝和壓實體積密度的測定方法 |
(Analysis of instant tea - Methods for determination of free-flow and compacted bulk densities) |
| BS 6986-3-1990 |
速溶茶的分析.水分含量的測定方法(130℃時的質量損失) |
(Analysis of instant tea - Method for determination of moisture content (loss in mass at 103 鳦)) |
| BS 6986-4-1990 |
速溶茶的分析.第4部分:總灰分的測定方法 |
(Analysis of instant tea - Method for determination of total ash) |
| BS 6988-1989 |
熱壓帶對底板包裝材料粘合力的測定方法 |
(Method for determination of the adhesion of autoclave tape to tray wrap material) |
| BS 6989-1989 |
松散物料儲存設備的安全指南 |
(Guide to safety of storage equipment for loose bulk materials) |
| BS 6990-1989 |
含有處理液體或其殘留液的鋼管焊接的實施規程 |
(Code of practice for welding on steel pipes containing process fluids or their residuals) |
| BS 6991-1990 |
家用、商業和輕工業用6/10A雙極耐天氣影響電連接器規范 |
(Specification for 6/10 A, two-pole weather-resistant couplers for household, commercial and light industrial equipment) |
| BS 6993-2-1990 |
門窗玻璃的熱和輻射特性.第2部分:U值直接測量方法(熱透射率法) |
(Thermal and radiometric properties of glazing - Method for direct measurement of U-value (thermal transmittance)) |
| BS 6995-1997 |
丁苯橡膠(聚合乳液和聚合溶液型)的硫化特性的估算方法 |
(Method for evaluation of vulcanization characteristics of styrene-butadiene rubber (SBR, YSBR) (emulsion and solution-polymerized types)) |
| BS 6996-2003 |
耐礦物油的丙烯腈-丁二烯橡膠化合物規范 |
(Mineral oil resistant acrylonitrile-butadiene rubber compounds - Specification) |
| BS 6997-1990 |
使用BS 6996丁腈橡膠制成的橡膠環形密封圈(’O’形圈)規范 |
(Specification for elastomeric toroidal sealing rings (’O’-rings) manufactured from acrylonitrile-butadiene rubbers complying with BS 6996) |
| BS 6999-1989 |
用于采用固體燃料最大輸出功率為45kW的燃燒設備的搪瓷低碳鋼煙道管、其他部件和附件的規范 |
(Specification for vitreous-enamelled low-carbon-steel flue pipes, other components and accessories for solid-fuel-burning appliances with a rated output of 45 kW) |
| BS 6F 100-1998 |
空間飛行用織物的檢驗和試驗程序 |
(Procedure for inspection and testing of textiles for aerospace purposes) |
| BS 6F 37-1990 |
航空航天用570g/m*m和640g/m*m棉粗帆布纖維規范 |
(Specification for 570 g/mUP2 and 640 g/mUP2 cotton canvas fabrics for aerospace purposes) |
| BS 6F 55-1991 |
航空航天用345g/m*m和415g/m*m棉粗帆布規范 |
(Specification for 345 g/mUP2 and 415 g/mUP2 cotton canvas fabrics suitable for aerospace purposes) |
| BS 6G 205-1-1995 |
飛行器用蓄電池.鉛酸電池規范 |
(Secondary batteries for aircraft - Specification for lead-acid batteries) |
| BS 6L 16-1985 |
99%鋁薄板材和帶材規范(回火號為H14或H24) |
(Specification for sheet and strip of 99% aluminium (temper designation H14 or H24)) |
| BS 6L 17-1985 |
99%鋁薄板材和帶材規范(回火號為0) |
(Specification for sheet and strip of 99% aluminium (temper designation-O)) |
| BS 6SP 4-2000 |
強度級別為880/1080MPa的帶頭的.平桿的,鉆頭的,鋼合金和耐腐蝕鋼制的銷釘 |
(Pins headed, plain shank, drilled, steel alloy and corrosion resisting steel with a strength class 880 / 1 080 MPa) |
| BS 6V 3-1943 |
航空材料規范.航空用高強度膠合板 |
(Specification for aircraft material - High strength plywood for aircraft) |
| BS 6W 8-1938 |
航空用系桿(型鍛的)(包括4B.A.1/2英寸B.S.F) |
(Tie rods (swaged) (No. 4 B.A. to) |
| BS 700-1-1982 |
刻度移液管.第1部分:一般要求規范 |
Graduated pipettes - Specification for general requirements |
| BS 700-2-1982 |
刻度移液管.第2部分:不規定等待時間移液管 |
Graduated pipettes - Specification for pipettes for which no waiting time is specified |
| BS 700-3-1982 |
刻度移液管.第3部分:吹出式移液管規范 |
Graduated pipettes - Specification for blow-out pipettes |
| BS 7000-1-1999 |
設計管理系統.革新管理指南 |
(Design management systems - Guide to managing innovation) |
| BS 7000-10-1995 |
設計管理系統.第10部分:設計管理用術語匯編 |
(Design management systems - Glossary of terms used in design management) |
| BS 7000-2-1997 |
設計管理系統.產品生產管理設計的管理指南 |
(Design management systems - Guide to managing the design of manufactured products) |
| BS 7000-3-1994 |
設計管理系統.第3部分:管理設備設計指南 |
(Design management systems - Guide to managing service design) |
| BS 7000-4-1996 |
設計管理系統.建筑設計的管理指南 |
(Design management systems - Guide to managing design in construction) |
| BS 7000-5-2001 |
設計管理系統.過時設計管理指南 |
Design management systems - Design management systems - Guide to managing obsolescence |
| BS 7000-6-2005 |
設計管理系統.包含設計的管理.指南 |
|
| BS 7001-1988 |
標準化照明器支承耦合器的互換性及安全性規范 |
Specification for interchangeability and safety of a standardized luminaire supporting coupler |
| BS 7005-1988 |
蒸汽壓縮致冷系統用碳鋼非用火壓力容器的設計和制造規范 |
Specification for design and manufacture of carbon steel unfired pressure vessels for use in vapour compression refrigeration systems |
| BS 7006-1989 |
農用拖曳式滾壓器規范 |
Specification for trailed agricultural rollers |
| BS 7007-1-1988 |
研磨制品.第1部分:截錐形研磨套筒的尺寸和標記規范 |
Abrasive products. Specification for dimensions and designation of truncated cone abrasive sleeves |
| BS 7007-2-1994 |
研磨制品.第2部分:帶軸砂輪的設計和尺寸規范 |
Abrasive products - Specification for designation and dimensions of coated abrasive flap wheels with shafts |
| BS 7007-3-1988 |
磨料制品.第3部分:非標準涂層磨料制品尺寸公差規范 |
Abrasive products - Specification for dimensional tolerances on non-standard coated abrasive products |
| BS 7007-5-1994 |
磨料產品.尺寸和公差規范及砂帶牌號 |
Abrasive products - Specification for dimensions, tolerances and designation of abrasive belts |
| BS 7007-6-1994 |
磨削產品.磨削板材的尺寸、公差、及名稱與符號的規范 |
Abrasive products - Specification for dimensions, tolerances and designation of abrasive sheets |
| BS 7009-1988 |
實時X射線照相術在焊接檢驗中的應用 |
(Guide to application of real-time radiography to weld inspection) |
| BS 701-1953 |
啤酒釀造用麥芽漿瓶規范 |
Specification for brewers` mash flask |
| BS 7010-1988 |
塑料模壓件尺寸公差系統的實用規程 |
Code of practice for a system of tolerances for the dimensions of plastics mouldings |
| BS 7011-0-1989 |
光學顯微鏡的消耗性附屬品.第0部分:一般介紹 |
Consumable accessories for light microscopes - General introduction |
| BS 7011-1.1-1998 |
光學顯微鏡用可消耗附屬用品.浸油.一般用途浸油的規范 |
Consumable accessories for light microscopes - Immersion oils - Specification for immersion oils for general use |
| BS 7011-2.1-1989 |
光學顯微鏡的消耗性附屬品.第2部分:顯微鏡載物玻璃片.第1節:尺寸和光學特性的規范 |
Consumable accessories for light microscopes - Slides - Specification for dimensions and optical properties |
| BS 7011-2.2-1998 |
光學顯微鏡的消耗性附屬品.顯微鏡載玻片.精加工材料和質量規范 |
Consumable accessories for light microscopes - Slides - Specification for materials and quality of finish |
| BS 7011-3.1-1989 |
光學顯微鏡的消耗性附屬品.第3部分:蓋玻璃.第1節:尺寸和光學特性規范 |
(Consumable accessories for light microscopes - Cover glasses - Specification for dimensions and optical properties) |
| BS 7011-3.2-1998 |
光學顯微鏡的消耗性附屬品.蓋玻片.精加工材料和質量規范 |
Consumable accessories for light microscopes - Cover glasses - Specification for materials and quality of finish |
| BS 7012-0-1989 |
光學顯微鏡.第0部分:一般介紹 |
Light microscopes - General introduction |
| BS 7012-1-1998 |
光學顯微鏡.顯微鏡成像部件放大能力規范 |
(Light microscopes - Specification for the magnifying power of microscope imaging components) |
| BS 7012-10.1-1998 |
光學顯微鏡.立體顯微鏡的最低要求.一般用途立體顯微鏡 |
(Light microscopes - Minimum requirements for stereo microscopes - Stereo microscopes for general use) |
| BS 7012-10.2-1997 |
光學顯微鏡.立體顯微鏡的最低要求.高性能顯微鏡 |
(Light microscopes - Minimum requirements for stereo microscopes - High performance microscopes) |
| BS 7012-10.4-1998 |
光學顯微鏡.立體顯微鏡的最低要求.提供給使用者的信息 |
(Light microscopes - Minimum requirements for stereo microscopes - Information provided to the user) |
| BS 7012-11-1998 |
光學顯微鏡.提供給使用者的信息 |
(Light microscopes - Information provided to the user) |
| BS 7012-12-1997 |
光學顯微鏡.第12部分:偏光顯微鏡的基準系統 |
(Light microscopes - Reference system of polarized light microscopy) |
| BS 7012-13-1997 |
光學顯微鏡.35mm SLR照相機用接口連接器(T型螺紋適用) |
Light microscopes - Interfacing connection for 35 mm SLR photo cameras (T-thread adaptation) |
| BS 7012-14-1997 |
光學顯微鏡.立體顯微鏡作標記 |
(Light microscopes - Marking of stereomicroscopes) |
| BS 7012-15-1997 |
光學顯微鏡.物鏡和目鏡上作標記 |
(Light microscopes - Marking of objectives and eyepieces) |
| BS 7012-16-2001 |
光學顯微鏡.可更換目鏡的直徑 |
(Light microscopes - Diameter of interchangeable eyepieces) |
| BS 7012-3-1997 |
光學顯微鏡.長度160mm的鏡筒成像距離的有關機械參考平面 |
(Light microscopes - Imaging distances related to mechanical reference planes for tube length 160 mm) |
| BS 7012-4.1-1998 |
光學顯微鏡.顯微鏡物鏡和物鏡旋座的規范.螺紋類型RMS(4/5in和1/36in) |
(Light microscopes - Specification for microscope objective and nosepiece screw threads - Screw thread type RMS (4/5 in x 1/36 in)) |
| BS 7012-6-1998 |
光學顯微鏡.光譜濾波器規范 |
(Light microscopes - Specification for spectral filters) |
| BS 7012-8-1997 |
光學顯微鏡.目鏡用分度鏡 |
(Light microscopes - Graticules for eyepieces) |
| BS 7012-9-1997 |
光學顯微鏡.第9部分:C型分界面聯接器規范 |
(Light microscopes - Specification for interfacing connection type C) |
| BS 7014-1989 |
中文的拉丁化指南 |
Guide to the romanization of Chinese |
| BS 7016-1-1988 |
往復式內燃機的零件部件和系統.第1部分:結構與外殼的術語詞匯 |
Components and systems of reciprocating internal combustion engines - Glossary of terms for structure and external covers |
| BS 7016-2-1988 |
往復式內燃機的零件部件和系統.第2部分:主動齒輪的術語詞匯 |
(Components and systems of reciprocating internal combustion engines - Glossary of terms for main running gear) |
| BS 7016-3-1988 |
往復式內燃機的零件部件和系統.第3部分:閥門、凸輸軸傳動和驅動機構的術語詞匯 |
Components and systems of reciprocating internal combustion engines - Glossary of terms for valves, camshaft drive and actuating mechanisms |
| BS 7016-4-1988 |
往復式內燃機的零件部件和系統.第4部分:增壓與進氣和排氣管道系統的術語詞匯 |
(Components and systems of reciprocating internal combustion engines - Glossary of terms for pressure charging and air/exhaust gas ducting systems) |
| BS 7016-6-1992 |
往復式內燃機的零部件和系統.第6部分:潤滑系統用術語詞匯 |
(Components and systems of reciprocating internal combustion engines - Glossary of terms for lubricating systems) |
| BS 7016-7-1999 |
往復式內燃機的件和系統.控制系統 |
(Components and systems of reciprocating internal combustion engines - Governing systems) |
| BS 7016-8-1996 |
往復式內燃機的零件部件和系統.第8部分:起動系統的術語詞匯 |
(Components and systems of reciprocating internal combustion engines - Glossary of terms for starting systems) |
| BS 7016-9-1997 |
往復式內燃機的件和系統.控制和監測系統 |
(Components and systems of reciprocating internal combustion engines - Control and monitoring systems) |
| BS 7019-1989 |
用于電壓為6.6KV及其以下系統(主要用于礦山)的、采用全屏蔽400A栓接方式防火電纜的連接裝置和轉接裝置規范 |
(Specification for fully screened 400 A bolted flameproof cable couplers and adaptors for use on systems up to and including 6.6 kV, primarily for use in mines) |
| BS 7020-1-1989 |
鐵礦石分析.第1部分:化學分析用預干燥試驗樣品的制備方法 |
Analysis of iron ores - Method for the preparation of pre-dried test samples for chemical analysis |
| BS 7020-10.2-1989 |
鐵礦石分析.銅含量的測定方法.火焰原子吸收光譜測定法 |
(Analysis of iron ores - Methods for the determination of copper content - Flame atomic absorption spectrometric method) |
| BS 7020-11.1-1993 |
鐵礦石分析.第11部分:釩含量測定方法.第1節:BPHA分光光度測定法 |
(Analysis of iron ores - Methods for the determination of vanadium content - BPHA spectrophotometric method) |
| BS 7020-11.2-1993 |
鐵礦石分析.第11部分:釩含量測定方法.第2節:火焰原子吸收光光度測定法 |
Analysis of iron ores - Methods for the determination of vanadium content - Flame atomic absorption spectrometric method |
| BS 7020-12-1989 |
鐵礦石分析.第12部分:鈦含量的測定方法:分光光度分析法 |
Analysis of iron ores - Method for the determination of titanium content: spectrophotometric method |
| BS 7020-13-1989 |
鐵礦石分析.第13部分:砷含量的測定方法:分光光度分析法 |
Analysis of iron ores - Method for the determination of arsenic content: spectrophotometric method |
| BS 7020-15-1993 |
鐵礦石分析.第15部分:鈣含量測定方法.火焰原子吸收光譜測定法 |
(Analysis of iron ores - Methods for the determination of calcium content: flame atomic absorption spectrometric method) |
| BS 7020-16-1993 |
鐵礦石分析.第16部分:鎳和/或鉻含量測定方法:火焰原子吸收光度測定法 |
(Analysis of iron ores - Methods for the determination of nickel and/or chromium contents: flame atomic absorption spectrometric method) |
| BS 7020-17-1989 |
鐵礦石分析.第17部分:鉛和(或)鋅含量的測定方法:火焰原子吸收光譜測定法 |
Analysis of iron ores - Method for the determination of lead and/or zinc contents: flame atomic absorption spectrometric method |
| BS 7020-18-1993 |
鐵礦石分析.第18部分:鎂含量測定方法:火焰原子吸收光度測定法 |
(Analysis of iron ores - Methods for the determination of magnesium content: flame atomic absorption spectrometric method) |
| BS 7020-19-1989 |
鐵礦石分析.氟含量的測定方法:離子選擇電極法 |
(Analysis of iron ores - Method for the determination of fluorine content: ion-selective electrode method) |
| BS 7020-1989 |
鐵礦石分析.第19部分:氟含量的測定方法:離子選擇電極法 |
(Analysis of iron ores. Method for the determination of fluorine content: ion-selective electrode method) |
| BS 7020-20-1990 |
鐵礦石分析.第20部分:水可溶氯化物含量測定:離子選擇電極法 |
(Analysis of iron ores - Method for the determination of water soluble chloride content: ion-selective electrode method) |
| BS 7020-22-1990 |
鐵礦石分析.第22部分:酸溶鐵(II)含量測定方法:滴定法 |
(Analysis of iron ores - Method for the determination of acid-soluble iron (II) content: titrimetric method) |
| BS 7020-3-1989 |
鐵礦石分析.第3部分:化合水含量的測定方法 |
(Analysis of iron ores - Method for the determination of combined water content) |
| BS 7020-4.2-1990 |
鐵礦石分析.第4部分:總鐵含量的測定方法.第2節:氯化鈦(III)還原法 |
(Analysis of iron ores - Method for the determination of total iron content - Titanium (III) chloride reduction methods) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com