標準號 |
中文名稱 |
英文名稱 |
| BS AU 143c Extract-1984 |
道路車輛控制、指示、信號裝置符號規范.復制用符號的印制 |
(Specification for symbols for controls, indicators and tell-tales for road vehicles - Print of symbols for reproduction purposes) |
| BS AU 143f-1996 |
道路車輛用控制符號、指示器和警報器的規范 |
(Specification for symbols for controls, indicators and tell-tales for road vehicles) |
| BS AU 144f-1988 |
翻新和商業車輛輪胎規范 |
(Specification for retreaded car and commercial vehicle tyres) |
| BS AU 145d-1998 |
向后反光的汽車號碼牌規范 |
(Specification for retroreflecting number plates) |
| BS AU 146b-1970 |
載重量不超過7.25噸的半掛車的標準自動滾柱式聯軸節規范 |
(Specification for standard automatic roller-type coupling for semi-trailers not exceeding 7) |
| BS AU 149a-1980 |
牽引車與掛車之間的6V或12V電氣系統的連接器技術規范:12N型(普通) |
(Specification for electrical connections between towing vehicles and trailers with 6 V or 12 V electrical equipment: type 12 N (normal)) |
| BS AU 152-1970 |
車輛的尾端標記牌規范 |
(Specification for rear marking plates for vehicles) |
| BS AU 156-1971 |
汽車前照燈與輔助頭燈燈光射向調準推薦規范 |
(Recommendations for aiming of headlamps and auxiliary lamps on motor vehicles) |
| BS AU 159f-1997 |
用于公共高速公路機動車輪胎的檢修規范 |
(Specification for repairs to tyres for motor vehicles used on the public highway) |
| BS AU 162a-1976 |
前照燈燈光射向調整裝置規范 |
(Specification for headlamp optical aiming devices) |
| BS AU 163a-1985 |
道路車輛氣壓、制動設備壓力試驗采用的連接法規范 |
(Specification for pressure test connection for compressed-air pneumatic braking equipment for road vehicles) |
| BS AU 164-1977 |
道路車輛在碰撞試驗中的沖擊速度測量規范 |
(Specification for measurement of impact velocity in collision tests on road vehicles) |
| BS AU 168-1978 |
汽車用有機材料制擋風玻璃生霧性能的測定方法 |
(Method for determination of the windscreen fogging characteristics of organic trim materials in motor vehicles) |
| BS AU 169a-1992 |
農業和林業用車輛、拖拉機和機械的內部裝飾材料燃燒性能的測定方法 |
(Method for determination of burning behaviour of interior materials for road vehicles, and tractors and machinery for agriculture and forestry) |
| BS AU 16a-1989 |
電纜連接件(最大連續額定電流17.5A)規范 |
(Specification for electrical cable connectors (17.5 A maximum continuous rating)) |
| BS AU 170-1979 |
后視鏡反射系數的測量方法 |
(Methods for measurement of reflectance of rear view mirrors) |
| BS AU 174-1-1979 |
道路車輛用非石油基制動液的液壓制動系統.第1部分:非石油基標準液 |
(Hydraulic brake systems, using non-petroleum base brake fluids for road vehicles - Specification for non-petroleum base reference fluids) |
| BS AU 174-2-1985 |
道路車輛用非石油基制動液的液壓制動系統.第2部分:非石油基制動液 |
(Hydraulic brake systems, using non-petroleum base brake fluids for road vehicles - Specification for non-petroleum base brake fluid) |
| BS AU 175-1b-1983 |
車輛識別號碼(VIN).第1b部分:容量與結構 |
(Vehicle identification numbers (VIN) - Specification for content and structure) |
| BS AU 175-2b-1983 |
車輛識別號碼(VIN).第2b部分:世界制造商識別碼(WMI)規則規范 |
(Vehicle identification numbers (VIN) - Specification for world manufacturer identifier (WMI) codes) |
| BS AU 175-3b-1983 |
車輛識別號碼(VIN).第3b部分:附件和定位規范 |
(Vehicle identification numbers (VIN) - Specification for location and attachment) |
| BS AU 175-4-1997 |
車輛識別號碼.可視車輛識別號碼規范 |
(Vehicle identification numbers (VIN) - Specification for a visible vehicle identification number) |
| BS AU 176-1980 |
按駕駛員視線確定安裝后視鏡的方法 |
(Method for establishment of eyellipses for Driver’s eye location) |
| BS AU 177a-1980 |
帶6V或12V電壓的電氣設備的牽引車和掛車之間電氣連接器規范:12S型(補充) |
(Specification for electrical connections between towing vehicles and trailers with 6 V or 12 V electrical equipment: type 12 S (supplementary)) |
| BS AU 178a-1992 |
道路車輛安全玻璃規范 |
(Specification for road vehicle safety glass) |
| BS AU 180-2-1982 |
制動襯墊.第2部分:制動襯墊材料的內抗剪強度的測量方法 |
(Brake linings - Method for measurement of internal shear strength of lining material) |
| BS AU 180-4-1982 |
制動襯墊.第4部分:對圓盤形制動墊尺寸及形狀熱效應的測定方法 |
(Brake linings - Method for determining effects of heat on dimensions and form of disc brake pads) |
| BS AU 180-5-1983 |
制動襯墊.第5部分:制動襯墊的抗水、抗鹽水溶液、抗油和制動液性能的測定方法 |
(Brake linings - Method for determining resistance to water, saline solution, oil and brake fluid of brake lining material) |
| BS AU 180-6-1982 |
制動襯墊.第6部分:因腐蝕造成與鐵配合表面粘合的評定方法 |
(Brake linings - Method for assessment of seizure to ferrous mating surface due to corrosion) |
| BS AU 181-1982 |
可拆卸車體系統的連接面尺寸規范 |
(Specification for interface dimensions for demountable vehicle body systems) |
| BS AU 182-1982 |
道路車輛用塑料安全玻璃窗材料規范 |
(Specification for plastics safety glazing materials for use in road vehicles) |
| BS AU 184-1982 |
世界各地道路車輛制造商的標識符號(WMPI)規范 |
(Specification for world parts manufacturer identifier code (WPMI) for road vehicles) |
| BS AU 187-2000 |
牽引客車和小型運貨車用的牽引繩索組件 |
(Tow rope assemblies for towing passenger cars and light vans) |
| BS AU 188-1983 |
道路車輛用牽引繩、纜、桿的固定規范 |
(Specification for anchorages for towing ropes, cables or bars for road vehicles) |
| BS AU 189-1983 |
道路車輛平穩轉彎性能的試驗方法規范 |
(Method of test for steady state cornering behaviour for road vehicles) |
| BS AU 190-1983 |
拖載達到2000kg的掛車三角形拉桿上超限裝置安裝面尺寸和固定螺栓規范 |
(Specification for interface dimensions and fixing bolts for the mounting of overrun devices on delta shaped drawbars of trailers up to 2000 kg) |
| BS AU 192-1983 |
大篷車質量與尺寸的術語詞匯 |
(Glossary of terms for masses and dimensions of caravans) |
| BS AU 193a-1990 |
機動腳踏車和摩托車的排氣系統更換規范 |
(Specification for replacement motor cycle and moped exhaust systems) |
| BS AU 194-1984 |
掛車和牽引車之間電氣連接性能規范 |
(Specification for performance of electrical connections between towing vehicles and trailers) |
| BS AU 196-1984 |
24V掛車防拖死制動系統和牽引車之間電氣連接規范 |
(Specification for electrical connections between 24 V trailer antilock braking systems and towing vehicles) |
| BS AU 197-1984 |
牽引車和帶有24V電氣設備的掛車之間的電氣連接規范:24N型(普通) |
(Specification for electrical connections between towing vehicles and trailers with 24 V electrical equipment: type 24 N (normal)) |
| BS AU 198-1984 |
帶有24V電氣設備的牽引車和掛車之間的電氣連接規范:24S型(補充) |
(Specification for electrical connections between towing vehicles and trailers with 24 V electrical equipment: type 24 S (supplementary)) |
| BS AU 199a-1997 |
轎車中手控裝置、指示器和信號裝置的位置規范 |
(Specification for location of hand controls, indicators and tell-tales in passenger cars) |
| BS AU 1c-1989 |
半掛車“50“牽引座主銷尺寸規范 |
(Specification for dimensions of ’50’ fifth wheel king pin for semi-trailers) |
| BS AU 200-1a-1984 |
載重車輛用減少噴濺裝置.第1a部分:輪胎滴水存水裝置的設計規范 |
(Spray reducing devices for heavy goods vehicles - Specification for design of containment devices) |
| BS AU 200-2a-1984 |
載重車輛用減少噴濺裝置.第2a部分:排除裝置以及空氣或水的分離物質及設備的性能 |
(Spray reducing devices for heavy goods vehicles - Specification for performance of suppression material and devices, and air/water separating material and devices) |
| BS AU 201-2-1985 |
繼電器和閃光燈.第2部分:道路車輛繼電器接線端的布置與功能標識規范 |
(Relays and flashers - Specification for arrangement and functional attribution of relay terminals for road vehicles) |
| BS AU 203a-1988 |
商用道路車輛的動力輸出裝置和輔助驅動裝置之間連接尺寸規范 |
(Specification for dimensions of couplings between power take offs (PTOs) and ancillary driven units on commercial road vehicles) |
| BS AU 205-1986 |
公路車輛靜態剎車效應試驗方法 |
(Method of test for effect of braking on steady state cornering behaviour of road vehicles) |
| BS AU 206-1-1986 |
道路車輛診斷系統.第1部分:術語詞匯 |
(Diagnostic systems for road vehicles - Glossary) |
| BS AU 206-2-1986 |
道路車輛診斷系統.第2部分:診斷試驗機圖形符號規范 |
(Diagnostic systems for road vehicles - Specification for graphical symbols for diagnostic testers) |
| BS AU 206-3-1986 |
公路車輛診斷系統.第3部分:試驗點火系統的一般要求規范 |
(Diagnostic systems for road vehicles - Specification for general requirements for testing ignition systems) |
| BS AU 206-4-1986 |
公路車輛診斷系統.第4部分:試驗電子系統的一般要求規范 |
(Diagnostic systems for road vehicles - Specification for general requirements for testing electronic systems) |
| BS AU 207-1986 |
汽車收音機安裝腔尺寸規范 |
(Specification for dimensions of car radio installation space) |
| BS AU 209-0-1996 |
車輛安全.車輛安全設備和裝置應用指南 |
(Vehicle security - Guide to the application of security devices/systems to vehicles) |
| BS AU 209-1a-1992 |
車輛安全規范.客車和其他派生車輛的鎖的裝置 |
(Vehicle security - Specification for locking systems for passenger cars and car derived vehicles) |
| BS AU 209-2-1987 |
車輛安全性.汽車內文娛和通訊設備的防盜安全系統規范 |
(Vehicle security - Specification for security systems against theft of in-car equipment for entertainment and communication purposes) |
| BS AU 209-3-1987 |
車輛安全性.第3部分:客車和改型車用安全標記規范 |
(Vehicle security - Specification for security marking of glazing for passenger cars and car derived vehicles) |
| BS AU 209-4a-1995 |
車輛安全性.客車和類似車輛用安全玻璃的規范 |
(Vehicle security - Specification for security glazing for passenger cars and car derived vehicles) |
| BS AU 209-5b-1996 |
車輛安全.客車和汽車的中心鎖定設備規范 |
(Vehicle security - Specification for central power locking systems for passenger cars and car derived vehicles) |
| BS AU 209-6a-1996 |
車輛安全.客車和汽車的死鎖系統規范 |
(Vehicle security - Specification for dead locking systems for passenger cars and car derived vehicles) |
| BS AU 209-7-1993 |
車輛安全.第7部分:貨車駕駛室的鎖定系統規范 |
(vehicle security - Specification for locking systems for goods vehicle Driver’s compartments) |
| BS AU 209-8-1997 |
車輛安全.貨車裝載艙上鎖定系統的規范 |
(Vehicle security - Specification for locking systems for goods vehicle load compartments) |
| BS AU 210-1-1987 |
大篷車和輕型掛車用拉桿.第1部分:鋼拉桿機械強度的計算方法 |
(Drawbars for caravans and light trailers - Method of calculation for the mechanical strength of steel drawbars) |
| BS AU 210-2-1994 |
大篷車和輕型掛車用拉桿.第2部分:鋁拉桿和車底架的設計規范 |
(Drawbars for caravans and light trailers - Specification for the design of aluminium drawbars and chassis) |
| BS AU 211-1987 |
商用車輛和公共汽車的齒輪傳動空氣壓縮機四孔法蘭尺寸規范 |
(Specification for dimensions of four-hole flanges for gear-driven air compressors for commercial vehicles and buses) |
| BS AU 214-2-1988 |
變速箱法蘭.第2部分:齒輪箱法蘭A型)的尺寸規范 |
(Gearbox flanges - Specification for dimensions for type A gearbox flanges for commercial vehicles and buses) |
| BS AU 214-3-1988 |
變速箱法蘭.第3部分:齒輪箱法蘭(S型)的尺寸規范 |
(Gearbox flanges - Specification for dimensions for type S gearbox flanges for commercial vehicles and buses) |
| BS AU 214a-1-1987 |
變速箱法蘭.第1部分:T形、商業交通和公共汽車用正交齒齒輪變速箱法蘭的尺寸規范 |
(Gearbox flanges - Specification for dimensions of cross-tooth gearbox flanges, type T, for commercial vehicles and buses) |
| BS AU 215-1-1987 |
動力輸出裝置.第1部分:商用道路車輛外廓尺寸規范 |
(Power take offs (PTOs) - Specification for dimensions for clearance envelope for commercial road vehicles) |
| BS AU 215-2-1987 |
動力輸出裝置.第2部分:商用公路車輛側面開口尺寸規范 |
(Power take offs (PTOs) - Specification for dimensions of side openings for commercial road vehicles) |
| BS AU 215-3-1988 |
動力輸出裝置.第3部分:商用道路與車輛安裝在尾部的功率輸出裝置的連接尺寸規范 |
(Power take offs (PTOs) - Specification for dimensions of connections for rear mounted power take offs for commercial road vehicles) |
| BS AU 216-1-1987 |
道路車輛用石油基制動液的液壓制動系統.第1部分:石油基標準液體規范 |
(Hydraulic brake systems using petroleum base brake fluids for road vehicles - Specification for petroleum base reference fluid) |
| BS AU 217-1a-1987 |
汽車用最大行駛速度限制器.第1a部分:安裝要求規范 |
(Maximum road speed limiters for motor vehicles - Specification for installed requirements) |
| BS AU 217-2-1990 |
汽車用最大行駛速度限制器.第2部分:設備和件要求規范 |
(Maximum road speed limiters for motor vehicles - Specification for system and component requirements) |
| BS AU 222-1988 |
試驗后圓盤制動襯的表面及材料裂縫的評定方法 |
(Method of evaluating surface and material flaws of disc brake pads after testing) |
| BS AU 223a-1995 |
小汽車和行李車的承重架規范 |
(Specification for vehicle support stands for cars and light vans) |
| BS AU 224b-1997 |
卡車和輕型貨車用便攜輪式移動斜道 |
(Specification for portable wheel ramps for cars and light vans) |
| BS AU 225-1988 |
道路車輛轉向球窩接合的尺寸規范 |
(Specification for dimensions of steering ball joints for commercial road vehicles) |
| BS AU 226-1988 |
活塞式內燃機用飛輪箱的標稱尺寸和公差規范 |
(Specification for nominal dimensions and tolerances of flywheel housings for reciprocating internal combustion engines) |
| BS AU 227-1988 |
商用車輛和公共汽車交流發電機圓軸端頭和輪轂的尺寸規范 |
(Specification for dimensions of cylindrical shaft ends and hubs for alternators for commercial vehicles and buses) |
| BS AU 228-1b-2002 |
道路車輛碰撞試驗.第1部分:測量技術和一般儀器規范 |
(Impact tests on road vehicles - Specification for measurement techniques and general instrumentation) |
| BS AU 228-2-1989 |
道路車輛碰撞試驗.第2部分:使用光學儀器進行的測量技術規范 |
(Impact tests on road vehicles - Specification for measurement techniques using optical instrumentation) |
| BS AU 229-1989 |
道路車輛用液壓制動液圖形符號規范 |
(Specification for graphical symbols to designate brake fluid types in road vehicles) |
| BS AU 231-1989 |
道路車輛七芯連接電纜規范 |
(Specification for seven-core connecting cable for road vehicles) |
| BS AU 232-1989 |
具有調節器的道路車輛交流發電機的一般要求和試驗方法 |
(Methods of test and general requirements for road vehicle alternators with regulators) |
| BS AU 233-1989 |
轎車起動電動機電氣連接規范 |
(Specification for starter motor electrical connections for passenger cars) |
| BS AU 234-1989 |
道路車輛起動電動機一般要求試驗方法 |
(Methods of test and general requirements for road vehicle starter motors) |
| BS AU 235-1-1989 |
商用車輛半掛車接輪耦合.第1部分:試驗條件和強度要求規范 |
(Fifth wheel couplings for commercial vehicles - Specification for test conditions and strength requirements) |
| BS AU 236-1990 |
道路車輛圓形電子速度記錄儀 |
(Specification for circular electronic tachographs for road vehicles) |
| BS AU 237a-1993 |
汽車啟動用小功率控制線具規范 |
(Specification for light domestic duty jumper lead sets for automotive starting) |
| BS AU 238-1991 |
道路車輛照明及光信號裝置術語詞匯 |
(Glossary of terms for road vehicle lighting and light signalling devices) |
| BS AU 242a-1998 |
汽車擋風玻璃檢修.操作規程 |
(Automotive windscreen repair - Code of practice) |
| BS AU 243-2-1991 |
由導電與耦合引起的電干擾的試驗方法.第2部分:僅限于采用12V電源轎車和輕型的商業用汽車電源線上的瞬時導電 |
(Methods of test for electrical disturbance by conduction and coupling - Electrical transient conduction along supply lines only on passenger cars and light commercial vehicles with 12 V supply) |
| BS AU 243-3-1991 |
由導電與耦合引起的電干擾的試驗方法.第3部分:僅限于采用24V電源的商業用汽車電源線上的瞬時導電 |
(Methods of test for electrical disturbance by conduction and coupling - Electrical transient conduction along supply lines only on commercial vehicles with 24 V supply) |
| BS AU 244-1992 |
車輛動力學和方向控制穩定性的術語詞匯 |
(Glossary of terms for road vehicle dynamics and road holding ability) |
| BS AU 245-1992 |
3.5噸以上的商業用車和公共汽車的前拖連結附件規范 |
(Specification for front towing attachments for commercial road vehicles and buses over 3.5 t) |
| BS AU 246-1992 |
雙軸道路車輛重心測定的試驗方法 |
(Method for determination of the centre of gravity of road vehicles with two axles) |
| BS AU 249-1993 |
往復式內燃機離合器殼規范.公稱尺寸和公差 |
(Specification for clutch housings for reciprocating internal combustion engines - Nominal dimensions and tolerances) |
| BS AU 24a-1989 |
總重量最大為5000kg掛車的牽引連接規范 |
(Specification for towing connections for trailers up to 5000 kg gross mass) |
| BS AU 25-1964 |
5-14噸的掛車和牽引車的牽引鉤規范 |
(Specification for towing hook for use between trailers of 5-14 tons gross weight and towing vehicle) |
| BS AU 250-1993 |
商業車輛和公共汽車用1、2和3 型交流發電機安裝尺寸規范 |
(Specification for mounting dimensions of alternators, types 1, 2 and 3 for commercial vehicles and buses) |
| BS AU 251-1994 |
自動疊層擋風玻璃檢修器具的操作規范 |
(Specification for performance of automotive laminated windscreen repair systems) |
| BS AU 252-1993 |
用于道路車輛的經節起動器電動機小齒輪規范 |
(Specification for diametral pitch starter motor pinions for road vehicles) |
| BS AU 255-1-1994 |
道路車輛的非屏蔽電纜.厚壁絕緣電纜的導線號和尺寸規范 |
(Road vehicle unscreened low tension cables - Specification for conductor sizes and dimensions for thick walled insulated cables) |
| BS AU 255-2-1994 |
道路車輛非屏蔽低壓電纜.薄壁絕緣電欖的導線號及尺寸規范 |
(Road vehicle unscreened low tension cables - Specification for conductor sizes and dimensions for thin walled insulated cables) |
| BS AU 256-1994 |
客車.車輛拐彎時無動力作用.開環回路法 |
(Passenger cars - Power-off reactions of a vehicle in a turn - Open-loop test method) |
| BS AU 257-2002 |
火花點火發動機和壓燃式發動機的改造實施規程 |
(Code of practice for remanufacture of spark and compression ignition engines) |
| BS AU 258-1995 |
彈性帶條規范 |
(Specification for elasticated straps) |
| BS AU 259-1995 |
商用車輛和客車用零部件規范.T型嚙合主動軸法蘭 |
(Specification for components for commercial vehicles and buses - Cross-tooth propeller shaft flanges, type T) |
| BS AU 26-1964 |
5-16噸的掛車和牽引車的牽引爪規范 |
(Specification for towing jaw for use between trailers of 5-16 tons gross weight and towing vehicle) |
| BS AU 260-4-1995 |
燃料噴射設備.詞匯.高壓管和端部接頭 |
(Fuel injection equipment - Vocabulary - High-pressure pipes and end-connections) |
| BS AU 261-1995 |
柴油發動機.60度錐孔的高壓燃料噴射管端部接頭 |
(Diesel engines. High-pressure fuel injection pipe end-connections with 60) |
| BS AU 262-1-1995 |
道路車輛.帶有圓錐形底座及其汽缸蓋座孔的護套型熱線點火塞.M14x1.25熱線點火塞 |
(Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - M14 x 1, 25 glow-plugs) |
| BS AU 262-2-1995 |
道路車輛.帶有圓錐形底座及其汽缸蓋座孔的護套型熱線點火塞.M12x1.25熱線點火塞 |
(Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - M12 x 1.25 glow-plugs) |
| BS AU 263-1995 |
道路車輛.帶有圓錐形底座及其汽缸蓋座孔的M14x1.25壓實火花塞 |
(Road vehicles - M14 X 1,25 compact spark-plugs with conical seating and their cylinder head housing) |
| BS AU 264-1995 |
道路車輛.帶有圓錐形底座及其汽缸蓋座孔的M18x1.5火花塞 |
(Road vehicles - M18 X 1,5 spark-plugs with conical seating and their cylinder head housing) |
| BS AU 265-2-1995 |
道路車輛.點火系統的電子性能和功能測試法 |
(Road vehicles - Ignition systems - Electrical performance and function test methods) |
| BS AU 266-1-1996 |
車頂負荷量規范.車頂桿 |
(Specification for roof load carriers - Roof bars) |
| BS AU 267-1998 |
斷開式電纜和二次耦合的實施規范 |
(Code of practice for breakaway cables and secondary couplings) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com