標準號 |
中文名稱 |
英文名稱 |
| BS 7324-1990 |
設備用圖形符號指南 |
(Guide to graphical symbols for use on equipment) |
| BS 7325-1990 |
用窄幅試驗法測定紙和紙板的抗壓強度 |
(Method for determination of the compressive strength of paper and board by the short span test) |
| BS 7327-1-1990 |
小型固定滅火器.小型固定聚四氟乙烯滅火器規范 |
(Small fixed fire extinguishers - Specification for small fixed halon fire extinguishers) |
| BS 7328-1990 |
模型蒸汽發動機和內燃機的規范 |
(Specification for model steam engines and internal combustion engines for models) |
| BS 733-2-1987 |
比重瓶.第2部分:比重瓶的校準和使用方法 |
(Pyknometers - Methods for calibration and use of pyknometers) |
| BS 7330-1-1990 |
電子設備用老虎鉗和鑷子.第1部分:術語 |
(Pliers and nippers for electronics - Nomenclature) |
| BS 7330-2-1990 |
電子設備用老虎鉗和鑷子.第2部分:一般要求規范 |
(Pliers and nippers for electronics - Specification for general requirements) |
| BS 7330-3-1990 |
電子設備用老虎鉗和鑷子.第3部分:試驗方法 |
(Pliers and nippers for electronics - Methods of test) |
| BS 7330-4-1990 |
電子設備用老虎鉗和鑷子.第4部分:夾緊控制專用老虎鉗 |
(Pliers and nippers for electronics - Specification for dimensions of single-purpose pliers for gripping and manipulating) |
| BS 7330-5-1990 |
電子設備用老虎鉗和鑷子.第5部分:專用剪鉗尺寸規范 |
(Pliers and nippers for electronics - Specification for dimensions of single-purpose cutting nippers) |
| BS 7331-1990 |
直接飾面用熱固性樹脂基碎木板材規范 |
(Specification for direct surfaced wood chipboard based on thermosetting resins) |
| BS 7332-1990 |
熱固性樹脂基裝飾性連續疊層板材規范 |
(Specification for decorative continuous laminates (DCL) based on thermosetting resins) |
| BS 7333-1990 |
回轉式動臂起重機規范 |
(Specification for slewing jib cranes) |
| BS 7334-1-1990 |
建筑施工用測量器具.第1部分:使用中精度的測定方法:原理 |
(Measuring instruments for building construction - Methods for determining accuracy in use: theory) |
| BS 7334-2-1990 |
建筑施工用測量器具.第2部分:使用中精度的測定方法:卷尺 |
(Measuring instruments for building construction - Methods for determining accuracy in use: measuring tapes) |
| BS 7334-3-1990 |
建筑施工用測量器具.第3部分:使用中精度的測定方法:光學水準儀 |
(Measuring instruments for building construction - Methods for determining accuracy in use: optical levelling instruments) |
| BS 7334-4-1992 |
建筑施工用測量器具.第4部分:經緯儀使用精度的測定方法 |
(Measuring instruments for building construction - Methods for determining accuracy in use of theodolites) |
| BS 7334-5-1992 |
建筑施工用測量器具.第5部分:光學鉛垂測量儀器使用精度的測定方法 |
(Measuring instruments for building construction - Methods for determining accuracy in use of optical plumbing instruments) |
| BS 7334-6-1992 |
建筑施工用測量器具.第6部分:激光儀器使用精度的測定方法 |
(Measuring instruments for building construction - Methods for determining accuracy in use of laser instruments) |
| BS 7334-7-1992 |
建筑施工用測量器具.第7部分:儀器用于定線時精度的測定方法 |
(Measuring instruments for building construction - Methods for determining accuracy in use of instruments when used for setting out) |
| BS 7334-8-1992 |
建筑施工用測量器具.第8部分:最遠可達150m的電子式測距儀器使用中精度的測定方法 |
(Measuring instruments for building construction - Methods for determining accuracy in use of electronic distance-measuring instruments up to 150 m) |
| BS 7335-1-1991 |
整體耐火材料裝置.第1部分:澆注成型式安裝實施準則 |
(Installation of monolithic refractories - Code of practice for installation by casting) |
| BS 7335-2-1991 |
整體耐火材料的安裝.噴涂式安裝實用規程 |
(Installation of monolithic refractories - Code of practice for installation by gunning) |
| BS 7337-1990 |
枕套及褥罩織物規范 |
(Specification for tickings) |
| BS 7338-1-1990 |
縮微平片封套.第1部分:16mm縮微平片用5片道封套規范 |
(Microfilm jackets - Specification for five-channel jacket for 16 mm microfilm) |
| BS 7339-1990 |
增壓設備用金屬結構材料的測試補充實用規程 |
(Code of practice for supplementary checking of metallic materials of construction in pressurized systems) |
| BS 734-1-1973 |
用流體比重計測定牛奶的密度.第1部分:牛奶用流體比重計規范 |
(Measurement of the density of milk using a hydrometer - Specification for hydrometers for use in milk) |
| BS 734-2-1959 |
用流體比重計測定牛奶的密度.第2部分:方法 |
(Measurement of the density of milk using a hydrometer - Methods) |
| BS 7340-1991 |
密度638Kg/m**2-1074Kg/m**2范圍內的石油烴壓縮系數一覽表 |
(Schedule for compressibility factors for petroleum hydrocarbons in the density range 638 kg/mUP3 to 1074 kg/mUP3) |
| BS 7342-1990 |
機織物疵點術語詞匯 |
(Glossary of terms for defects in woven fabrics) |
| BS 7343-1990 |
針織物疵點術語詞匯 |
(Glossary of terms for defects in knitted fabrics) |
| BS 7344-1990 |
一般用途成卷低密度聚乙烯薄膜規范 |
(Specification for reeled low density polyethylene film for general purpose application) |
| BS 7345-1990 |
螺栓、螺紋和螺柱的公稱長度和通用螺紋長度規范 |
(Specification for nominal lengths of bolts, screws and studs and thread lengths for general purpose bolts) |
| BS 7346-2-1990 |
煙和熱控制系統部件.強制排煙和排熱通風機規范 |
(Components for smoke and heat control systems - Specification for powered smoke and heat exhaust ventilators) |
| BS 7346-3-1990 |
煙和熱控制系統部件.煙幕規范 |
(Components for smoke and heat control systems - Specification for smoke curtains) |
| BS 7346-4-2003 |
煙和熱控制系統部件.利用穩態設計點火法的排煙和排熱通風系統用功能推薦方法和計算方法.實施規程 |
(Components for smoke and heat control systems - Functional recommendations and calculation methods for smoke and heat exhaust ventilation systems, employing steady-state design fires - Code of practic) |
| BS 7346-5-2005 |
煙和熱控制系統部件.利用時間相關設計點火法的排煙和排熱通風系統的功能推薦方法和計算方法.實施規程 |
|
| BS 7346-6-2005 |
煙和熱控制系統部件.電纜系統規范 |
|
| BS 7347-1990 |
機械沖擊試驗機性能和特性導則 |
(Guide for characteristics and performance of mechanical shock testing machines) |
| BS 7349-1-1993 |
斷芯式音鉚釘.第1部分:閉端青鉚釘規范 |
(Blind rivets with break mandrel - Specification for closed end blind rivets) |
| BS 7349-2-1993 |
斷芯式盲鉚釘.第2部分:開端和盲鉚釘規范 |
(Blind rivets with break mandrel - Specification for open end blind rivets) |
| BS 734C-1962 |
牛奶中與2-6%脂肪含量范圍內的給定脂肪含量和觀測密度(液態脂肪)對應的總固體和非脂肪固體的百分比 |
(Measurement of the density of milk using a hydrometer - Percentage of total solids and non-fatty solids in milk corresponding to given fat content and observed density fat content range 2-6 per cent () |
| BS 7350-1990 |
加熱和冷卻水系統用雙調節球形閥和流量測量裝置規范 |
(Specification for double regulating globe valves and flow measurement devices for heating and chilled water systems) |
| BS 7351-1990 |
工業用金屬護套加熱件 |
(Specification for metal-sheathed heating elements for industrial use) |
| BS 7354-1990 |
高壓敞開式出線站設計實用規程 |
(Code of practice for design of high-voltage open-terminal stations) |
| BS 7357-1990 |
7.5L抽水馬桶用沖洗水箱規范 |
(Specification for 7.5 L WC flushing cisterns) |
| BS 7361-1-1991 |
陰極保護.第1部分:陸地和海上應用實施準則 |
(Cathodic protection - Code of practice for land and marine applications) |
| BS 7362-1990 |
連接公共電信操作機電報網絡的電報終端裝置規范 |
(Specification for telex terminal apparatus for connection to public telecommunications operators’ telex networks) |
| BS 7363-1990 |
焊件用受控?zé)釓?qiáng)度試驗和焊道覆板試驗方法 |
(Methods for controlled thermal severity (CTS) test and bead-on-plate (BOP) test for welds) |
| BS 7364-1990 |
采用螺釘固定石膏墻板的立筋隔段和隔板以及襯里用鍍鋅鋼螺柱和鋼槽規范 |
(Specification for galvanized steel studs and channels for stud and sheet partitions and linings using screw fixed gypsum wallboards) |
| BS 7367-1991 |
充氣軟飲料包括碳酸水用玻璃瓶制造規范 |
Specification for manufacture of glass bottles for carbonated soft drinks including carbonated water |
| BS 7368-1990 |
嬰兒用奶瓶橡皮奶頭規范 |
(Specification for babies’ elastomeric feeding bottle teats) |
| BS 7369-1991 |
社會警報系統用多頻聲音信號協議規范 |
(Specification for multi-frequency tone signalling protocol for social alarm systems) |
| BS 7370-1-1991 |
廣場保養.廣場維護組織的建立和管理以及與維護有關的設計條件的推薦規范 |
Grounds maintenance - Recommendations for establishing and managing grounds maintenance organizations and for design considerations related to maintenance |
| BS 7370-2-1994 |
廣場保養.硬區域養護的推薦方法(包括運動場表面) |
Grounds maintenance - Recommendations for the maintenance of hard areas (excluding sports surfaces) |
| BS 7370-3-1991 |
廣場保養.提供舒適條件的多用途草地(運動草地除外)保養推薦指南 |
Grounds maintenance - Recommendations for maintenance of amenity and functional turf (other than sports turf) |
| BS 7370-4-1993 |
廣場保養.軟風景敷覆物養護推薦方法(舒適的草地除外) |
Grounds maintenance - Recommendations for maintenance of soft landscape (other than amenity turf) |
| BS 7370-5-1998 |
土地維護.水域維護的推薦 |
Grounds maintenance - Recommendations for the maintenance of water areas |
| BS 7371-1-1992 |
金屬緊固件上的涂層.一般要求和選擇指南規范 |
Coatings on metal fasteners - Specification for general requirements and selection guidelines |
| BS 7371-10-1994 |
金屬緊固件上的覆層.第10部分:金屬緊固件的有機覆層規范 |
Coatings on metal fasteners - Specification for organic coatings |
| BS 7371-2-1993 |
金屬緊固件上的涂層.扭矩/夾緊力關系式規范 |
(Coatings on metal fasteners - Specification for torque/clamping force relationship) |
| BS 7371-4-1994 |
金屬緊固件涂層.第4部分:電鍍鎳.鎳鉻和銅鎳鉻涂層規范. |
Coatings on metal fasteners - Specification for electroplated nickel, nickel/chromium and copper/nickel/chromium coatings |
| BS 7371-6-1998 |
金屬緊固件涂層.熱浸鍍鋅涂層的規范 |
Coatings on metal fasteners - Specification for hot dipped galvanized coatings |
| BS 7371-7-1994 |
金屬緊固件上的覆層.機械用鋅覆層的規范 |
(Coatings on metal fasteners - Specification for mechanically applied zinc coatings) |
| BS 7371-8-1998 |
金屬緊固件上的覆層.噴鍍鋅覆層的規范 |
(Coatings on metal fasteners - Specification for sherardized coatings) |
| BS 7371-9-1996 |
金屬緊固件的覆層.磷酸鹽覆層或油覆層規范 |
(Coatings on metal fasteners - Specification for phosphate or phosphate and oil coatings) |
| BS 7372-1-1991 |
工業用金屬絲網和金屬絲篩布的孔徑尺寸和線徑的組合選擇指南.第1部分:總則 |
(Guide to the choice of aperture size and wire diameter combinations for industrial wire screens and woven wire cloth - General) |
| BS 7372-2-1991 |
工業用金屬絲網和金屬絲篩布的孔徑尺寸和線徑的組合選擇指南.第2部分:金屬絲篩布的優選組合 |
(Guide to the choice of aperture size and wire diameter combinations for industrial wire screens and woven wire cloth - Preferred combinations for woven wire cloth) |
| BS 7372-3-1993 |
工業金屬絲網和金屬絲編織布孔徑和絲徑組合選擇指南.第3部分:預壓接或壓力焊接金屬絲網的優選組合 |
(Guide to the choice of aperture size and wire diameter combinations for industrial wire screens and woven wire cloth - Preferred combinations for pre-crimped or pressure-welded wire screens) |
| BS 7373-1998 |
規范制訂導則 |
(Guide to the preparation of specifications) |
| BS 7373-2-2001 |
產品規范.產品規范和產品合格聲明的識別標準指南 |
Product specifications - Guide to identifying criteria for a product specification and to declaring product conformity |
| BS 7375-1996 |
建筑與施工現場配電的實用規程 |
Code of practice for distribution of electricity on construction and building sites |
| BS 7376-1990 |
工作臺或手推車結構使用的玻璃規范 |
Specification for inclusion of glass in the construction of tables or trolleys |
| BS 7376-2004 |
工作臺或手推車結構中使用的玻璃.規范 |
|
| BS 7376-2004 |
工作臺或手推車結構中使用的玻璃.規范 |
|
| BS 7378-1-1997 |
使用2號數字存取信號傳輸系統(DASS 2)經2048千位/秒CCITT推薦G.703接口連接公共電信系統的裝置.一般要求 |
(Apparatus for connection to public telecommunications systems using the Digital Access Signalling System No. 2 (DASS 2) via a 2048 kbit/s CCITT Recommendation G.703 interface - General requirements) |
| BS 7378-2-1991 |
使用2號數字存取信號傳輸系統(DASS 2)經2048千位/秒CCITT推薦G·03接口連接公共電信系統的裝置.第2部分:自 |
(Apparatus for connection to public telecommunications systems using the Digital Access Signalling System No. 2 (DASS 2) via a 2048 kbit/s CCITT Recommendation G.703 interface - Specification for autom) |
| BS 7378-3-1998 |
使用2號數字存取信號傳輸系統(DASS 2)經CCITT推薦G.703的2048kbit/s接口的公共電信系統連接裝置.與信號傳輸 |
() |
| BS 7379-1991 |
塑料/金屬疊層可漲縮軟管規范 |
Specification for plastics/metal laminate collapsible tubes |
| BS 7383-1990 |
煤礦用電壓不超過11KV的作為外殼內連接電纜填充劑的冷澆樹脂基化合物規范 |
Specification for cold-pour resin-based compound for use as a filling medium in terminating cables in enclosures for voltages not exceeding 11 kV for use in coal mines |
| BS 7385-1-1990 |
建筑物中振動的評定和測量.振動測量指南以及振動對建筑物影響的評定 |
Evaluation and measurement for vibration in buildings - Guide for measurement of vibrations and evaluation of their effects on buildings |
| BS 7385-2-1993 |
建筑物振動測量和評定.地面振動損失等級指南 |
Evaluation and measurement for vibration in buildings - Guide to damage levels from groundborne vibration |
| BS 7386-1997 |
住宅中現有門窗通風控制用通風帶材規范(包括試驗方法) |
Specification for draughtstrips for the draught control of existing doors and windows in housing (including test methods) |
| BS 7388-1991 |
液壓動力系統防漏泄導則 |
(Guide for prevention of leaks from hydraulic fluid power systems) |
| BS 7390-1990 |
速溶茶規范 |
Specification for instant tea |
| BS 7393-1990 |
用半微量彩色指示器滴定法測定石油產品中的總酸值 |
Method for determination of total acid number in petroleum products by semi-micro colour indicator titration |
| BS 7394-2-1994 |
成品眼鏡.配裝眼鏡的規范 |
Complete spectacles - Specification for prescription spectacles |
| BS 7398-1991 |
手動弓形鋸結構規范 |
Specification for hand hacksaw frames |
| BS 7402-1991 |
電子打印價目機要求指南 |
Guide to specifying electronic typographic markup (SETM) |
| BS 7403-1-1998 |
內燃機液流潤滑油濾清器.不同壓力/流量的試驗方法 |
(Full-flow lubricating oil filters for internal combustion engines - Methods of test for differential pressure/flow characteristics) |
| BS 7403-11-1998 |
內燃機用全流式潤滑油濾清器.自清潔過濾器的試驗方法 |
Full-flow lubricating oil filters for internal combustion engines - Methods of test for self-cleaning filters |
| BS 7403-12-2000 |
內燃機液流潤滑油濾清器.使用顆粒計數,污染物滯留容量的過濾效率 |
(Full-flow lubricating oil filters for internal combustion engines - Filtration efficiency using particle counting, and contaminant retention capacity) |
| BS 7403-13-1991 |
內燃機用全流式潤滑油過濾器.第13部分:旋入式過濾器尺寸規范 |
(Full-flow lubricating oil filters for internal combustion engines - Specification for dimensions of spin-on filters) |
| BS 7403-2-1998 |
內燃機液流潤滑油濾清器.件分支閥特性的試驗方法 |
(Full-flow lubricating oil filters for internal combustion engines - Method of test for element by-pass valve characteristics) |
| BS 7403-3-1998 |
內燃機滿流式潤滑油濾清器.第3部分:耐高壓差和耐高溫性能試驗方法 |
(Full-flow lubricating oil filters for internal combustion engines - Methods of test for resistance to high differential pressure and to elevated temperature) |
| BS 7403-4-1998 |
內燃機液流潤滑油濾清器.初始微粒滯留效率,壽命和累積效率的試驗方法(重量計法) |
(Full-flow lubricating oil filters for internal combustion engines - Methods of test for initial particle retention efficiency, life and cumulative efficiency (gravimetric method)) |
| BS 7403-5-1991 |
內燃機用全流式潤滑油濾清器.第5部分:冷起動摸擬和液壓脈沖耐久性的試驗方法 |
(Full-flow lubricating oil filters for internal combustion engines - Method of test for cold start simulation and hydraulic pulse durability) |
| BS 7403-6-1991 |
內燃機用全流式潤滑油濾清器.第6部分:靜態破碎壓力的試驗方法 |
(Full-flow lubricating oil filters for internal combustion engines - Method of test for static burst pressure) |
| BS 7403-7-1991 |
內燃機用全流式潤滑油濾清器.第7部分:疲勞振動試驗方法 |
(Full-flow lubricating oil filters for internal combustion engines - Method of test for vibration fatigue) |
| BS 7403-9-1995 |
內燃機用全流式潤滑油濾清器.進油口和出油口用防泄漏閥試驗法 |
(Full-flow lubricating oil filters for internal combustion engines - Method of test for inlet and outlet anti-drain valves) |
| BS 7404-1.1-1991 |
遙控設備和裝置.第1部分:總設想.第1節:一般原理 |
(Telecontrol equipment and systems - General considerations - General principles) |
| BS 7404-1.2-1991 |
遠程控制設備和系統.第1部分:總條件.第2節:規范指南 |
(Telecontrol equipment and systems - General considerations - Guide for specifications) |
| BS 7404-1.4-1995 |
遙控設備和系統.第1部分:一般原理.第4節:遙控?cái)?shù)據的傳輸和英國標準(BS 7404 Pt.5 和7404 Pt.6)的組織編輯指 |
(Telecontrol equipment and systems - General considerations - Guide for basic aspects of telecontrol data transmission and organization of standards BS 7404:Part 5 and BS 7404:Part 6) |
| BS 7404-3-1991 |
遙控設備和裝置.第3部分:接口規范(電氣特性) |
(Telecontrol equipment and systems - Specification for interfaces (electrical characteristics)) |
| BS 7404-4-1991 |
遙控設備和裝置.第4部分:性能規范 |
(Telecontrol equipment and systems - Specification for performance) |
| BS 7405-1991 |
封閉管道中液體流量測量用流量表應用和選擇指南 |
(Guide to selection and application of flowmeters for the measurement of fluid flow in closed conduits) |
| BS 7406-1991 |
用動態吹氣和靜態氣體法對紙和紙板的水蒸汽透濕率的測定方法 |
(Methods for determination of water vapour transmission rate of sheet materials (paper and board) by dynamic sweep and static gas methods) |
| BS 7407-1991 |
直接由燃料驅動可乘兒童車輛的規范 |
(Specification for vehicles, directly propelled by energy derived from a fuel, capable of carrying children) |
| BS 7410-1991 |
工業篩分用術語詞匯 |
(Glossary of terms used in industrial screening) |
| BS 7411-1991 |
手柄操縱背式噴霧器規范 |
(Specification for lever operated knapsack sprayers) |
| BS 7412-2002 |
由未增塑聚氯乙烯(PVC-U)擠制空心型材制的塑料窗.規范 |
(Plastics windows made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles - Specification) |
| BS 7413-2002 |
門窗用未增塑聚氯乙烯(PVC-U)型材.規范 |
(Unplasticized polyvinyl chloride (PVC-U) profiles for windows and doors - Specification) |
| BS 7414-1991 |
塑料窗用具有熱焊接角白色PVC-U擠壓空心型材外型規范:B型材料 |
(Specification for white PVC-U extruded hollow profiles with heat welded corner joints for plastics windows: materials type B) |
| BS 7416-1991 |
液壓動力系統用精密無縫冷拔低碳鋼管規范 |
(Specification for precision finished seamless cold-drawn low carbon steel tubes for use in hydraulic fluid power systems) |
| BS 7417-1991 |
液壓O形環密封的液壓耦合器界面尺寸規范 |
(Specification for interface dimensions of flat face ’O’-ring seal hydraulic couplings) |
| BS 7419-1991 |
壓緊螺栓規范 |
(Specification for holding down bolts) |
| BS 7420-1991 |
測定固體、液體和氣體燃料熱值的導則 |
(Guide for determination of calorific values of solid, liquid and gaseous fuels (including definitions)) |
| BS 7423-1999 |
床身長度不小于900mm的兒童旅行帆布床安全要求規范 |
(Specification for safety requirements for Children’s travel cots of internal base length not less than 900 mm) |
| BS 7424-1991 |
用靜態法測定紙和紙板彎曲剛度一般原則指南 |
(Guide to general principles for determination of the bending stiffness of paper and board by static methods) |
| BS 7425-1-1991 |
研磨料度粒度.第1部分:粗顆粒容積密度的測定方法 |
(Abrasive grains - Method for the determination of the bulk density of macrograins) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com