標準號 |
中文名稱 |
英文名稱 |
| BS ISO 6861-1997 |
信息和文獻工作.目錄信息交換用Glagolitic字母代碼字符集 |
Information and documentation - Glagolitic alphabet coded character set for bibliographic information interchange |
| BS ISO 6870-2003 |
動物飼料.玉米赤霉烯酮含量的定性測定 |
(Animal feeding stuffs - Qualitative determination of zearalenone) |
| BS ISO 6879-1996 |
空氣質量.空氣質量測量方法的性能特征和有關概念 |
Air quality - Performance characteristics and related concepts for air quality measuring methods |
| BS ISO 69-1998 |
電影攝影.16mm電影磁片.剪切和穿孔尺寸 |
Cinematography - 16 mm motion-picture magnetic film - Cutting and perforating dimensions |
| BS ISO 690-2-1998 |
信息和文獻.參考文獻.第2部分:電子文獻或其分冊 |
Information and documentation - Bibliographic references - Electronic documents or parts thereof |
| BS ISO 6916-1-1996 |
柔性多孔聚合材料.泡沫和海綿多孔橡膠制品.第1部分:薄板 |
Flexible cellular polymeric materials - Sponge and expanded cellular rubber products - Specification - Sheeting |
| BS ISO 6926-2000 |
聲學.聲功率級測定用基準聲源的性能和校正要求 |
Acoustics - Requirements for the performance and calibration of reference sound sources for the determination of sound power levels |
| BS ISO 6939-2002 |
紡織品.筒子紗.紗線抗斷裂強度試驗法.絞紗法 |
Textiles - Yarns from packages - Method of test for breaking strength of yarn by the skein method |
| BS ISO 694-2000 |
船舶技術.船上磁羅盤的定位 |
Ships and marine technology. Positioning of magnetic compasses in ships |
| BS ISO 6953-1-2001 |
氣壓傳動.壓縮氣體壓力調節器和過濾器調節器.供應商說明書中包括的主要特性和產品標記要求 |
Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Main characteristics to be included in literature from suppliers and product-marking requirements |
| BS ISO 6953-2-2001 |
氣壓傳動.壓縮氣體壓力調節器和過濾器調節器.測定供應商說明書中包括的主要特性的試驗方法 |
Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Test methods to determine the main characteristics to be included in literature from suppliers |
| BS ISO 6954-2001 |
機械振動.客輪和商船可允許振動的測量、報告和評價導則 |
Mechanical vibration - Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships |
| BS ISO 6969-2004 |
道路車輛.聲音信號設備.車輛安裝后的試驗 |
|
| BS ISO 6971-2002 |
焊接結構拉曳用彎板鏈、附件和鏈輪 |
Cranked-link drag chains of welded construction, attachments and sprockets |
| BS ISO 6972-2002 |
焊接結構工程用彎板鏈、附件和鏈輪 |
Cranked-link mill chains of welded construction, attachments and sprockets |
| BS ISO 6974-1-2000 |
天然氣.用氣相色譜法測定具有規定不定度的成分.第1部分:簡明分析導則 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Guidelines for tailored analysis |
| BS ISO 6974-2-2001 |
天然氣.用氣相色譜法測定規定的不確定性.數據處理用定性和統計巡飭肯低廠 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Measuring-system characteristics and statistics for processing of data |
| BS ISO 6974-3-2000 |
天然氣.用氣相色譜法測定具有規定不定度的成分.用兩個填充柱對氫,氦,氧,氮,二氧化碳和達到C8的碳氫化合物測定 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns |
| BS ISO 6974-4-2000 |
天然氣.用氣相色譜法測定具有規定不定度的成分.第4部分:用兩柱測定實驗室和聯機測量系統用氮、二氧化碳和C到C和C的烴類 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns |
| BS ISO 6974-5-2000 |
天然氣.用氣相色譜法測定具有規定不定度的成分.用三柱測定實驗室和聯機測量系統用氮、二氧化碳和C到C和C的烴類 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns |
| BS ISO 6974-6-2002 |
天然氣.用氣相色譜法測定具有規定不定度的成分.用三柱測定氫、氦、氧、氮、二氧化碳和CDOWN1 至 CDOWN8的碳氫化合物 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and CDOWN1 to CDOWN8 hydrocarbons using three capillary columns |
| BS ISO 6980-1997 |
校準劑量計和劑量強度計及測定充作為β輻射能量函數的靈敏度用的β標準放射源 |
Specification for reference beta radiations for calibrating dosimeters and dose-rate meters and for determining their response as a function of beta-radiation energy |
| BS ISO 6981-1996 |
液壓傳動.液壓缸.活塞桿端孔.裝配尺寸 |
Hydraulic fluid power - Cylinders - Rod end plain eyes - Mounting dimensions |
| BS ISO 6982-1996 |
液壓傳動.液壓缸.活塞桿端球面環孔.裝配尺寸 |
Hydraulic fluid power - Cylinders - Rod end spherical eyes - Mounting dimensions |
| BS ISO 6989-2002 |
紡織纖維.短纖維長度和長度分布的測定(用單纖維的測定) |
Textiles fibres - Determination of length and length distribution of staple fibres (by measurement of single fibres) |
| BS ISO 70-1995 |
電影技術.在35mm電影膠片上的35mm負片光學聲帶.位置和最大寬度尺寸 |
Cinematography - Monophonic 35 mm negative photographic sound record on 35 mm motion-picture film - Position and maximum width dimensions |
| BS ISO 7000-2004 |
設備用圖形符號.索引和一覽表 |
|
| BS ISO 7004-2002 |
攝影.工業用射線照相膠片.置于X-射線和γ-射線下的膠片ISO感光 速度和ISO平均速度梯度G2和G4的測定 |
Photography - Industrial radiographic films - Determination of ISO speed, ISO average gradient and ISO gradients G2 and G4 when exposed to X- and gamma-radiation |
| BS ISO 701-1999 |
國際齒輪符號.幾何數據的符號 |
International gear notation - Symbols for geometrical data |
| BS ISO 7026-1998 |
柴油發動機.S規格B類針式噴嘴的20、21、21.1和27型螺旋擰入式噴嘴架 |
Diesel engines - Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size `S1` type `B` |
| BS ISO 704-2001 |
術語工作.原則和方法 |
Terminology work - Principles and methods |
| BS ISO 7041-2002 |
2型長效扭矩式六角螺母(使用非金屬墊圈).性能類別9和12 |
Prevailing torque type hexagon nuts (with non-metallic insert), style 2. Property classes 9 and 12 |
| BS ISO 706-2004 |
橡膠膠乳.凝固物(篩余物)含量的測定 |
|
| BS ISO 7063-2004 |
滾動軸承.滾針軸承滾道滾針.邊界尺寸和公差 |
|
| BS ISO 709-2001 |
香精油.酯化值的測定 |
Essential oils - Determination of ester value |
| BS ISO 7112-1999 |
林業機械.便攜式手持灌木鏟除機和雜草修剪機.詞匯 |
Machinery for forestry - Portable hand-held brush-cutters and grass-trimmers - Vocabulary |
| BS ISO 7113-1999 |
便攜式手持林業機械.灌木鏟除機用割鋸附件.單片金屬刃 |
Portable hand-held forestry machines - Cutting attachments for brush cutters - Single piece metal blades |
| BS ISO 7148-1-2000 |
滑動軸承.軸承材料摩擦特性試驗.軸承金屬試驗 |
Plain bearings - Testing of tribological behaviour of bearing materials - Testing of bearing metals |
| BS ISO 7148-2-2000 |
滑動軸承.軸承材料摩擦特性試驗.多聚物軸承材料試驗 |
Plain bearings - Testing of tribological behaviour of bearing materials - Testing of polymer-based bearing materials |
| BS ISO 7176-1-1999 |
輪椅.靜態穩定性的測定 |
Wheelchairs - Determination of static stability |
| BS ISO 7176-14-1997 |
輪椅.電動輪椅的動力和控制系統.要求和試驗方法 |
Wheelchairs - Power and control systems for electric wheelchairs - Requirements and test methods |
| BS ISO 7176-15-1997 |
輪椅.第15部分:信息說明、文獻工作和作標記 |
Wheelchairs - Requirements for information disclosure, documentation and labelling |
| BS ISO 7176-16-1997 |
輪椅.椅裝套布的耐燃性.要求和試驗方法 |
Wheelchairs - Resistance to ignition of upholstered parts - Requirements and test methods |
| BS ISO 7176-2-2001 |
輪椅.電動輪椅動態穩定性的測定 |
Wheelchairs - Determination of dynamic stability of electric wheelchairs |
| BS ISO 7176-21-2003 |
輪椅.電動輪椅和小型摩托車電磁兼容性的要求和試驗方法 |
(Wheelchairs - Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motorized scooters) |
| BS ISO 7176-22-2000 |
輪椅.安裝方法 |
Wheelchairs - Set-up procedures |
| BS ISO 7176-24-2004 |
輪椅.使用者操作的爬梯設備的要求和試驗方法 |
|
| BS ISO 7176-3-2003 |
輪椅.制動器效能的測定 |
(Wheelchairs - Determination of effectiveness of brakes) |
| BS ISO 7176-4-1998 |
輪椅.電動輪椅能耗和理論距離范圍測定用小型摩托車 |
Wheelchairs - Energy consumption of electric wheelchairs and scooters for determination of theoretical distance range |
| BS ISO 7176-6-2002 |
輪椅.電動輪椅最大速度、加速度及減速度的測定 |
Wheelchairs - Determination of maximum speed, acceleration and deceleration of electric wheelchairs |
| BS ISO 7176-8-1998 |
輪椅.靜態強度、沖擊強度和疲勞強度的要求和試驗方法 |
Wheelchairs - Requirements and test methods for static, impact and fatigue strengths |
| BS ISO 7176-9-2002 |
輪椅.電動輪椅氣候試驗 |
Wheelchairs - Climatic tests for electric wheelchairs |
| BS ISO 7180-1997 |
氣動流體動力.氣缸.缸筒和氣口螺紋規格 |
Pneumatic fluid power - Cylinders - Bore and port thread sizes |
| BS ISO 7181-1997 |
液壓傳動.液壓缸.缸筒和活塞桿截面比 |
Hydraulic fluid power - Cylinders - Bore and rod area ratios |
| BS ISO 7187-1996 |
攝影技術.直接彩色照片材料.ISO感光度的測定 |
Photography - Materials for direct-positive colour-print cameras - Determination of ISO speed |
| BS ISO 7197-1998 |
神經外科植入物.無菌的,一次性使用的腦積水分流管和組件 |
Neurosurgical implants - Sterile, single-use hydrocephalus shunts and components |
| BS ISO 7198-1998 |
心血管植入物.血管修復術 |
Cardiovascular implants - Tubular vascular prostheses |
| BS ISO 7200-2001 |
技術制圖.標題欄 |
Technical drawing - Title blocks |
| BS ISO 7206-4-2002 |
外科植入物.部分和全部假體關節.第4部分:干股骨神經組件和扭轉敷物耐久性能的測定 |
Implants for surgery - Partial and total hip joint prostheses - Determination of endurance properties of stemmed femoral components |
| BS ISO 7211-3-2002 |
紡織品.機織物.結構.分析方法.織物紗線卷曲性的測定 |
Textiles - Woven fabrics - Construction - Methods of analysis - Determination of crimp of yarn in fabric |
| BS ISO 7211-4-2002 |
紡織品.機織物.結構.分析方法.從織物中取出的紗的捻度測定 |
Textiles - Woven fabrics - Construction - Methods of analysis - Determination of twist in yarn removed from fabric |
| BS ISO 7211-5-2002 |
紡織品.機織物.結構.分析方法.從織物中取出的紗的線密度測定 |
Textiles - Woven fabrics - Construction - Methods of analysis - Determination of linear density of yarn removed from fabric |
| BS ISO 7214-1998 |
泡沫塑料.聚乙烯.試驗方法 |
Cellular plastics. Polyethylene. Methods of test |
| BS ISO 7215-1996 |
鐵礦石.相對還原性的測定 |
Iron ores - Determination of relative reducibility |
| BS ISO 7229-1997 |
橡膠或塑料涂覆織物.透氣性測量 |
Rubber- or plastics-coated fabrics - Measurements of gas permeability |
| BS ISO 7238-2004 |
奶油.乳清pH值的測定.電位滴定法 |
|
| BS ISO 7240-15-2004 |
火災探測和警報系統.多感火災探測器 |
|
| BS ISO 7241-2-2000 |
液壓傳動.速動連接件.試驗方法 |
Hydraulic fluid power - Quick-action couplings - Test methods |
| BS ISO 727-1-2002 |
壓力管件用由未增塑的聚氯乙烯,氯化聚氯乙烯或丙烯腈/丁二烯/苯乙烯制的帶普通管套的管配件.米制系列 |
Fittings made from unplasticized poly (vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Metric series |
| BS ISO 727-2-2002 |
壓力管件用由未增塑的聚氯乙烯,氯化聚氯乙烯或丙烯腈/丁二烯/苯乙烯制的帶普通管套的管配件.英制系列 |
Fittings made from unplasticized poly (vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Inch-based series |
| BS ISO 727-2-2005 |
壓力管件用由未增塑聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)或丙烯腈/丁二烯/苯乙烯(ABS)制的帶普通管套的管配件.英制系列 |
|
| BS ISO 7270-1-2004 |
橡膠.熱解氣相色譜法分析.聚合物(單聚合物和混合物)的鑒定 |
|
| BS ISO 7270-2-2005 |
橡膠.熱解氣相色譜法分析.苯乙烯/丁二烯/異戊二烯苯乙烯比率的測定 |
|
| BS ISO 7278-3-1998 |
液態烴.動態測量.容積式流量計試驗系統.第3部分:脈沖內插技術 |
Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Pulse interpolation techniques |
| BS ISO 7278-4-1999 |
液態烴.動態測量.容積式流量計試驗系統.管道驗證操作者指南 |
Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Guide for operators of pipe provers |
| BS ISO 7299-1997 |
柴油發動機.燃油噴射泵端面裝配的法蘭盤 |
Diesel engines - End-mounting flanges for fuel injection pumps |
| BS ISO 7314-2003 |
航空航天.液壓系統.金屬軟管組件 |
Aerospace - Fluid systems - Metal hose assemblies |
| BS ISO 732-2001 |
攝影技術.120和220規格的膠片.尺寸 |
Photography - 120-size and 220-size films - Dimensions |
| BS ISO 7322-2000 |
復合軟木.試驗方法 |
Composition cork - Test methods |
| BS ISO 7341-2000 |
銀行業務.銀行往來帳戶對帳表 |
Banking - Nostro accounts reconciliation |
| BS ISO 7341-2005 |
銀行業務.銀行往來帳戶核對 |
|
| BS ISO 7343-1995 |
電影技術.在35mm電影拷貝上雙聲軌攝影錄音.位置和寬度尺寸 |
Cinematography - Two-track photographic sound records on 35 mm motion-picture prints - Positions and width dimensions |
| BS ISO 7348-1995 |
玻璃容器.制造.詞匯 |
Glass containers - Manufacture - Vocabulary |
| BS ISO 7391-1-1997 |
塑料.聚碳酸酯模塑和擠塑材料.第1部分:命名體制和基本 |
Plastics. Polycarbonate (PC) moulding and extrusion materials. Designation system and basis for specifications |
| BS ISO 7391-2-1997 |
塑料.聚碳酸酯模塑和擠塑材料.第2部分:試樣制備和特性測定 |
Plastics. Polycarbonate (PC) moulding and extrusion materials. Preparation of test specimens and determination of properties |
| BS ISO 7401-2003 |
道路車輛.橫向瞬態響應的試驗方法.開路控制試驗法 |
(Road vehicles - Lateral transient response test methods - Open-loop test methods) |
| BS ISO 7425-1-2002 |
液壓傳動.彈性體塑料表面密封件的腔.尺寸和公差.活塞密封腔 |
Hydraulic fluid power - Housing for elastomer-energized, plastic-faced seals - Dimensions and tolerances - Piston seal housings |
| BS ISO 7425-2-2002 |
液壓傳動.彈性體塑料表面密封件的腔.尺寸和公差.活塞桿密封腔 |
(Hydraulic fluid power - Housing for elastomer-energized, plastic-faced seals - Dimensions and tolerances - Rod seal housings) |
| BS ISO 7475-2002 |
機械振動.平衡試驗機.測量站用機罩和其他安全措施 |
(Mechanical vibration - Balancing machines - Enclosures and other protective measures for the measuring station) |
| BS ISO 7504-2002 |
氣體分析.詞匯 |
(Gas analysis - Vocabulary) |
| BS ISO 7507-1-2004 |
石油和液態石油產品.立式圓筒狀油罐的標定.容量計量法 |
|
| BS ISO 7507-5-2000 |
石油和液態石油產品.立式圓柱形罐的校準.內電光通達距離法 |
(Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks - External electro-optical distance-ranging method) |
| BS ISO 7539-8-2000 |
金屬和合金的腐蝕.應力腐蝕試驗.焊件評定試樣的制備和使用 |
Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of specimens to evaluate weldments |
| BS ISO 7539-9-2003 |
金屬和合金的腐蝕.應力腐蝕試驗.在上升荷載或上升位移下試驗用預裂樣品的制備和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of pre-cracked specimens for tests under rising load or rising displacement) |
| BS ISO 7547-2002 |
船舶和海上技術.起居處所的空調和通風.設計條件和計算基礎 |
Ships and marine technology - Air-conditioning and ventilation of accommodation spaces - Design conditions and basis of calculations |
| BS ISO 7565-1994 |
縮微攝影技術.透明縮微膠片閱讀器.性能測量 |
Micrographics - Readers for transparent microforms - Measurement of characteristics |
| BS ISO 7573-2000 |
技術圖紙.物資清單 |
Technical drawings - Item list |
| BS ISO 7588-1-1998 |
道路車輛.電氣/電子開關設備.繼電器和閃光器 |
Road vehicles - Electrical/electronic switching devices - Relays and flashers |
| BS ISO 7588-2-1999 |
道路車輛.電氣/電子開關設備.第2部分:電子設備 |
Road vehicles - Electrical/electronic switching devices - Electronic devices |
| BS ISO 7588-3-1999 |
道路車輛.電氣/電子開關設備.微繼電器 |
Road vehicles - Electrical/electronic switching devices - Microrelays |
| BS ISO 7589-2002 |
攝影.感光測定用光源.規范 |
Photography - Illuminants for sensitometry - Specifications for daylight, incandescent tungsten and printer |
| BS ISO 7612-1996 |
柴油發動機.基座進油路燃料噴射泵.安裝尺寸 |
Diesel engines - Base-mounted in-line fuel injection pumps - Mounting dimensions |
| BS ISO 7617-1-2002 |
室內裝飾用塑料涂覆織物.聚氯乙烯(PVC)涂覆針織品規范 |
Plastics-coated fabrics for upholstery - Specification for PVC-coated knitted fabrics |
| BS ISO 762-2003 |
水果和蔬菜制品.礦物雜質含量的測定 |
(Fruit and vegetable products - Determination of mineral impurities content) |
| BS ISO 763-2003 |
水果和蔬菜制品.鹽酸不溶性灰分的測定 |
(Fruit and vegetable products - Determination of ash insoluble in hydrochloric acid) |
| BS ISO 764-2002 |
時計學.磁阻表 |
Horology - Magnetic resistant watches |
| BS ISO 7654-1998 |
道路車輛.柴油發動機用離心式燃油濾油器.安裝和連接尺寸 |
Road vehicles - Spin-on fuel filters for diesel engines - Mounting and connecting dimensions |
| BS ISO 7660-2001 |
香精油.含有難于皂化的酯類香精油酯值的測定 |
Essential oils - Determination of ester value of oils containing difficult-to-saponify esters |
| BS ISO 7720-1998 |
2型,常用扭矩全金屬六角螺母.性能類別9 |
Prevailing torque type all-metal hexagon nuts, style 2. Property class 9 |
| BS ISO 7731-2005 |
人類工效學.公共和工作場所險情信號.險情聽覺信號 |
|
| BS ISO 7731-2005 |
人類工效學.公共和工作場所險情信號.險情聽覺信號 |
|
| BS ISO 7738-2001 |
螺釘和螺母用組合工具.組合扳手.扳手長度和端口最大厚度 |
Assembly tools for screws and nuts - Combination wrenches - Lengths of wrenches and maximum thickness of heads |
| BS ISO 7743-2004 |
硫化或熱塑性橡膠.壓縮應力-應變性能的測定 |
|
| BS ISO 7746-1998 |
銀行業務.銀行之間電報的電文格式 |
Banking. Telex formats for inter-bank messages |
| BS ISO 7760-2002 |
攝影.沖洗廢液.對苯二酚含量的測定 |
Photography - Processing waste - Determination of hydroquinone |
| BS ISO 7766-1-1996 |
攝影技術.沖洗廢液.氰化物分析.第1部分:用光譜法測定六氰基高鐵酸鹽(Ⅰ)和六氰基高鐵酸鹽(Ⅲ) |
Photography - Processing wastes - Analysis of cyanides - Determination of hexacyanoferrate(II) and hexacyanoferrate(III) by spectrometry |
| BS ISO 7766-2003 |
攝影沖洗廢液.氰化物分析.用光譜法測定六氰基高鐵酸鹽(Ⅱ)和六氰基高鐵酸鹽(Ⅲ) |
(Processing photographic wastes - Analysis of cyanides - Determination of hexacyanoferrate(II) and hexacyanoferrate(III) by spectrometry) |
| BS ISO 777-2001 |
紙,紙漿和紙板.鈣的測定 |
Paper, board and pulp - Determination of calcium |
| BS ISO 7772-1-1998 |
工業洗衣機對織物影響的評估.洗衣機 |
Assessment of industrial laundry machinery by its effect on textiles - Washing machines |
| BS ISO 7772-2-1996 |
通過對織物的影響來評價工業洗衣設備.第2部分:脫水機 |
Assessment of industrial laundry machinery by its effect on textiles - Extracting machines |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com