標準號 |
中文名稱 |
英文名稱 |
| BS EN ISO 2114-2000 |
塑料(聚酯樹脂)、涂料和清漆(粘合劑).部分酸值和總酸值的測定 |
(Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value) |
| BS EN ISO 21227-1-2003 |
色漆和清漆.用光成像評定覆層表面缺陷.通用指南 |
(Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - General guidance) |
| BS EN ISO 21269-2004 |
有米制細螺距螺紋的六角凹頭螺釘 |
|
| BS EN ISO 21281-2005 |
自行式乘坐控制工業貨車的踏板結構和布局.踏板結構和布局的原則 |
|
| BS EN ISO 21281-2005 |
自行式乘坐控制工業貨車的踏板結構和布局.踏板結構和布局的原則 |
|
| BS EN ISO 21329-2004 |
石油和天然氣工業.管道運輸系統.機械連接件的試驗程序 |
|
| BS EN ISO 21351-2005 |
航天系統.功能和技術規范 |
|
| BS EN ISO 2151-2004 |
聲學.壓縮機和真空泵的噪聲試驗規范.工程法(2級) |
|
| BS EN ISO 21530-2004 |
牙科學.牙科設備表面用材料.耐化學消毒劑的測定 |
|
| BS EN ISO 21533-2003 |
牙科.韌帶內注射用可重復使用的管式注射器 |
(Dentistry - Reusable cartridge syringes intended for intraligamentary injections) |
| BS EN ISO 21549-1-2004 |
醫療信息學.病人醫療卡數據.通用結構 |
|
| BS EN ISO 21549-2-2004 |
醫療信息學.病人醫療卡數據.共同對象 |
|
| BS EN ISO 21549-2-2004 |
醫療信息學.病人醫療卡數據.共同對象 |
|
| BS EN ISO 21549-3-2004 |
醫療信息學.病人醫療卡數據.有限的臨床數據 |
|
| BS EN ISO 21549-3-2004 |
醫療信息學.病人醫療卡數據.有限的臨床數據 |
|
| BS EN ISO 21567-2004 |
食品和動物飼料的微生物學.志賀氏桿菌檢測的水平方法 |
|
| BS EN ISO 21567-2004 |
食品和動物飼料的微生物學.志賀氏桿菌檢測的水平方法 |
|
| BS EN ISO 21567-2004 |
食品和動物飼料的微生物學.志賀氏桿菌檢測的水平方法 |
|
| BS EN ISO 2157-1995 |
牙科用旋轉器械.公稱直徑和命名代碼 |
(Dental rotary instruments - Nominal diameters and designation code number) |
| BS EN ISO 21571-2005 |
食品.基因改良有機體及其衍生物檢測的分析方法.核酸萃取 |
|
| BS EN ISO 21572-2004 |
食品.基因改良有機物及衍生產品的檢測方法.基于蛋白質的方法 |
|
| BS EN ISO 216-1990 |
書寫紙和某些類別的印刷紙.裁切后尺寸.A和B系列 |
(Writing paper and certain classes of printed matter - Trimmed sizes - A and B series) |
| BS EN ISO 2160-1999 |
石油產品.對銅的腐蝕性.銅片試驗 |
(Petroleum products - Corrosiveness to copper - Copper strip test) |
| BS EN ISO 2162-1-1996 |
技術產品文件.彈簧.簡化表示法 |
(Technical product documentation - Springs - Simplified representation) |
| BS EN ISO 2162-2-1996 |
技術產品文獻.彈簧.數據圓柱型螺旋狀壓縮彈簧的介紹 |
(Technical product documentation - Springs - Presentation of data for cylindrical helical compression springs) |
| BS EN ISO 2162-3-1996 |
技術產品文獻.彈簧.第3部分:詞匯 |
(Technical product documentation - Springs - Vocabulary) |
| BS EN ISO 21627-1-2003 |
塑料.環氧樹脂.氯含量測定.無機氯 |
(Plastics - Epoxy resins - Determination of chlorine content - Inorganic chlorine) |
| BS EN ISO 21627-2-2003 |
塑料.環氧樹脂.氯含量測定.易皂化氯 |
(Plastics - Epoxy resins - Determination of chlorine content - Easily saponifiable chlorine) |
| BS EN ISO 21627-3-2003 |
塑料.環氧樹脂.氯含量測定.氯總量 |
(Plastics - Epoxy resins - Determination of chlorine content - Total chlorine) |
| BS EN ISO 21647-2004 |
醫用電氣設備.呼吸氣體監測器的基本安全和性能的特殊要求 |
|
| BS EN ISO 21670-2003 |
法蘭六角焊接螺母 |
(Hexagon weld nuts with flange) |
| BS EN ISO 2177-1986 |
金屬鍍層.鍍層厚度的測量.陽極分解的電量計法 |
(Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution) |
| BS EN ISO 2177-2005 |
金屬覆層.覆層厚度的測量.陽極溶解庫侖法 |
|
| BS EN ISO 2178-1984 |
磁性基質的非磁性鍍層.鍍層厚度的測量.磁性法 |
(Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method) |
| BS EN ISO 22000-2005 |
食品安全管理系統.食品鏈上任一組織的要求 |
|
| BS EN ISO 2203-1997 |
技術制圖.齒輪的習慣畫法 |
(Technical drawing - Conventional representation of gears) |
| BS EN ISO 22174-2005 |
食品和動物飼料的微生物學.食物傳染病原體檢測用聚合酶鏈反應(PCR).一般要求和定義 |
|
| BS EN ISO 22174-2005 |
食品和動物飼料的微生物學.食物傳染病原體檢測用聚合酶鏈反應(PCR).一般要求和定義 |
|
| BS EN ISO 2231-1992 |
橡膠或塑料涂覆織物.試件環境調節標準大氣 |
(Rubber- or plastics-coated fabrics - Standard atmospheres for conditioning and testing) |
| BS EN ISO 2233-2001 |
包裝.完整滿裝的運輸包裝件.試驗條件 |
(Packaging - Complete, filled transport packages and unit loads - Conditioning for testing) |
| BS EN ISO 2234-2002 |
包裝.滿裝的運輸包裝和成組裝運.利用靜態負荷法進行堆積試驗 |
(Packaging - Complete, filled transport packages and unit loads - Stacking tests using a static load) |
| BS EN ISO 2244-2002 |
包裝.滿裝運輸包裝和組成裝運.水平?jīng)_擊試驗 |
(Packaging - Complete, filled transport packages and unit loads - Horizontal impact tests) |
| BS EN ISO 2247-2003 |
包裝.滿裝的運輸包裝件和成組裝運.固定低頻率振動試驗 |
(Packaging - Complete, filled transport packages and unit loads - Vibration tests at fixed low frequency) |
| BS EN ISO 22612-2005 |
傳染介質防護服.防干微生物滲入的試驗方法 |
|
| BS EN ISO 22612-2005 |
傳染介質防護服.防干微生物滲入的試驗方法 |
|
| BS EN ISO 22777-2005 |
鞋靴.附件的試驗方法:粘扣.附件用反復粘合前后的剝離強度法.粘扣.反復粘合前后的剝離強度 |
|
| BS EN ISO 228-1-2003 |
非螺紋密封連接的管螺紋.尺寸、公差和名稱與符號 |
(Pipe threads where pressure-tight joints are not made on the threads - Dimensions, tolerances and designation) |
| BS EN ISO 228-2-2003 |
非螺紋密封連接的管螺紋.極限量規檢驗 |
(Pipe threads where pressure-tight joints are not made on the threads - Verification by means of limit gauges) |
| BS EN ISO 2286-1-1998 |
橡膠或塑料涂覆織物.卷料參數的測定.第1部分:長度、寬度和濕重的測定方法 |
(Rubber- or plastics-coated fabrics - Determination of roll characteristics - Methods for determination of length, width and net mass) |
| BS EN ISO 2286-2-1998 |
橡膠或塑料涂覆織物.卷料參數的測定.第2部分:涂料每單位面積總質量、質量和襯底每單位面積質量的測定方法 |
(Rubber- or plastics-coated fabrics - Determination of roll characteristics - Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate) |
| BS EN ISO 2286-3-1998 |
橡膠或塑料涂覆織物.卷繞特性的測定.第3部分:厚度的測定方法 |
(Rubber- or plastics-coated fabrics - Determination of roll characteristics - Method for determination of thickness) |
| BS EN ISO 2307-2005 |
纖維繩索.特定物理和機械性能的測定 |
|
| BS EN ISO 2320-1998 |
常用扭矩式鋼質六角螺母.機械和性能要求 |
(Prevailing torque type steel hexagon nuts - Mechanical and performance requirements) |
| BS EN ISO 2338-1998 |
未淬硬鋼和奧氏體不銹鋼制的平行銷 |
(Parallel pins of unhardened steel and austenitic stainless steel) |
| BS EN ISO 2342-2004 |
有釘體的開槽無頭螺釘 |
|
| BS EN ISO 23429-2004 |
六角槽的測量 |
|
| BS EN ISO 2360-2003 |
非磁性電導基體金屬上的非導體鍍層.鍍層厚度的測量.波幅靈敏渦流法 |
(Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method) |
| BS EN ISO 2361-1984 |
磁性和非磁性基質的鎳電鍍層.鍍層厚度的測量.磁性法 |
(Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method) |
| BS EN ISO 2398-1996 |
壓縮空氣用紡織纖維增強橡膠軟管規范 |
(Rubber hose, textile-reinforced, for compressed air - Specification) |
| BS EN ISO 2409-1992 |
色漆和清漆.交叉切割試驗 |
(Paints and varnishes - Cross-cut test) |
| BS EN ISO 2411-2000 |
橡膠或塑料涂層織物.涂層粘合力的測定 |
(Rubber or plastics-coated fabrics - Determination of coating adhesion) |
| BS EN ISO 2417-2003 |
皮革.物理和機械試驗.靜吸水率的測定 |
(Leather - Physical and mechanical tests - Determination of the static absorption of water) |
| BS EN ISO 2418-2003 |
皮革.化學、物理、機械和色牢度試驗.取樣部位 |
(Leather - Chemical, physical and mechanical and fastness tests - Sampling location) |
| BS EN ISO 2419-2003 |
皮革.物理和機械試驗.樣品制備和狀態調節 |
(Leather - Physical and mechanical tests - Sample preparation and conditioning) |
| BS EN ISO 2420-2003 |
皮革.物理和機械試驗.表觀密度的測定 |
(Leather - Physical and mechanical tests - Determination of apparent density) |
| BS EN ISO 24234-2004 |
牙科學.牙科汞齊合金用汞及合金 |
|
| BS EN ISO 24234-2004 |
牙科學.牙科汞齊合金用汞及合金 |
|
| BS EN ISO 2431-1996 |
色漆和清漆.用流量杯測定流動時間 |
(Paints and varnishes - Determination of flow time by use of flow cups) |
| BS EN ISO 2439-2001 |
柔性多孔聚合物材料.硬度的測定(壓痕技術) |
(Flexible cellular polymeric materials - Determination of hardness (indentation technique)) |
| BS EN ISO 2440-2000 |
柔性和硬性多孔聚合物材料.加速老化試驗 |
(Flexible and rigid cellular polymeric materials - Accelerated ageing tests) |
| BS EN ISO 2450-1999 |
奶油.脂肪含量的測定(基準方法) |
(Cream - Determination of fat content (Reference method)) |
| BS EN ISO 2503-1998 |
氣焊設備.焊接,切割和類似工藝用300巴以上氣瓶調壓器 |
(Gas welding equipment - Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar) |
| BS EN ISO 252-1-1999 |
織物傳輸帶.結構件之間的粘結強度.試驗方法 |
(Textile conveyor belts - Adhesive strength between constitutive elements - Methods of test) |
| BS EN ISO 2535-2002 |
塑料.未飽和的聚酯樹脂.25℃時的膠凝時間的測量 |
(Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature) |
| BS EN ISO 2538-2004 |
產品幾何量技術規范.棱體的角度和斜度系列 |
|
| BS EN ISO 2566-1-1999 |
鋼.伸長值的換算.碳素鋼和低合金鋼 |
(Steel - Conversion of elongation values - Carbon and low alloy steels) |
| BS EN ISO 2566-2-2001 |
鋼.伸長值換算.奧氏體鋼 |
(Steel - Conversion of elongation values - Austenitic steels) |
| BS EN ISO 2578-1993 |
塑料.長期暴露于熱作用后時間和溫度極限值的測定 |
(Plastics - Determination of the time-temperature limits after prolonged exposure to heat) |
| BS EN ISO 2580-1-2002 |
塑料.丙烯腈-丁二烯-苯乙烯共聚物(ABS)的模塑和壓塑材料.名稱和符號系統和規范基礎 |
(Plastics - Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials - Designation system and basis for specifications) |
| BS EN ISO 2580-2-2004 |
塑料.丙烯腈-丁二烯-苯乙烯共聚物(ABS)的模塑和擠塑材料.試樣制備和性能測定 |
|
| BS EN ISO 2589-2003 |
皮革.物理和機械試驗.厚度的測定 |
(Leather - Physical and mechanical tests - Determination of thickness) |
| BS EN ISO 2592-2001 |
閃點和燃點的測定.克利弗蘭得(Cleveland)開杯法 |
(Determination of flash and fire points - Cleveland open cup method) |
| BS EN ISO 2624-1995 |
銅及銅合金.平均粒度估計 |
(Copper and copper alloys - Estimation of average grain size) |
| BS EN ISO 2626-1995 |
銅.氫脆裂試驗 |
(Copper - Hydrogen embrittlement test) |
| BS EN ISO 2639-2002 |
鋼.滲碳層和硬化層的深度的測定和檢驗 |
(Steels - Determination and verification of the depth of carburized and hardened cases) |
| BS EN ISO 266-1997 |
聲學的優選頻率 |
(Acoustics - Preferred frequencies) |
| BS EN ISO 2702-1992 |
熱處理鋼自攻螺釘?shù)臋C(jī)械性能 |
(Heat-treated steel tapping screws - Mechanical properties) |
| BS EN ISO 2738-2000 |
燒結金屬材料(硬金屬除外).密度、油含量和開口孔隙度的測定 |
(Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity) |
| BS EN ISO 2739-1998 |
燒結金屬襯套.徑向抗壓強度的測定 |
(Sintered metal bushes - Determination of radial crushing strength) |
| BS EN ISO 2740-2000 |
繞結金屬材料(不包括硬質合金).拉力試件 |
Sintered metal materials, excluding hardmetals - Tensile test pieces |
| BS EN ISO 2758-2002 |
紙.耐破裂強度的測定 |
(Paper - Determination of bursting strength) |
| BS EN ISO 2759-2002 |
紙板.耐破裂強度的測定 |
(Board - Determination of bursting strength) |
| BS EN ISO 2789-2003 |
情報和文獻.國際圖書館統計學 |
(Information and documentation - International library statistics) |
| BS EN ISO 2806-1995 |
工業自動化系統.數控機床詞匯 |
(Industrial automation systems - Numerical control of machines - Vocabulary) |
| BS EN ISO 2810-2004 |
色漆和清漆.涂層的自然風化.暴露和評定 |
|
| BS EN ISO 2812-1-1993 |
色漆和清漆.耐液體浸蝕測定.第1部分:總方法 |
(Paints and varnishes - Determination of resistance to liquids - General methods) |
| BS EN ISO 2812-2-1993 |
色漆和清漆.耐液體浸蝕的測定.第2部分:浸液法 |
(Paints and varnishes - Determination of resistance to liquids - Water immersion method) |
| BS EN ISO 2815-2003 |
色漆和清漆.布考耳茲(Buchholz)壓痕試驗 |
(Paints and varnishes - Buchholz indentation test) |
| BS EN ISO 2818-1996 |
塑料.試樣的機加工制備 |
(Plastics - Preparation of test specimens by machining) |
| BS EN ISO 2819-1980 |
金屬基質上的金屬鍍層.電鍍層和化學沉積層.試驗附著力的方法述評 |
(Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion) |
| BS EN ISO 283-1-2000 |
織物傳送帶.全厚度織物試驗.拉伸強度的測定.斷裂伸長和參考負荷的測定 |
(Textile conveyor belts - Full thickness tensile testing - Determination of tensile strength, elongation at break and elongation at the reference load) |
| BS EN ISO 284-2003 |
輸送帶.導電率.規范和試驗方法 |
(Conveyor belts - Electrical conductivity - Specification and test method) |
| BS EN ISO 2867-1999 |
土方機械.出入口裝置 |
(Earth-moving machinery - Access systems) |
| BS EN ISO 2870-1994 |
表面活性劑.洗滌劑.酸性條件下可水解的和不可水解的陰離子活性物質的測定 |
(Surface active agents - Detergents - Determination of anionic-active matter hydrolyzable and non-hydrolyzable under acid conditions) |
| BS EN ISO 2871-1-1994 |
表面活性劑.洗滌劑-陽離子活性物質含量的測定.第1部分:高分子量陽極活性物質 |
(High molecular mass cationic-active matter) |
| BS EN ISO 2871-2-1994 |
表面活性劑.洗滌劑,陽離子活性物含量測定.第2部分:低分子團(200-500)的陽離子活性物質 |
(Surface active agents - Detergents - Determination of cationic-active matter content - Cationic-active matter of low molecular mass (between 200 and 500)) |
| BS EN ISO 2873-2003 |
包裝.滿裝運輸包裝件和成組裝運.低壓試驗 |
(Packaging - Complete, filled transport packages and unit loads - Low pressure test) |
| BS EN ISO 2875-2002 |
包裝.完整,滿裝運輸包裝件和成組裝運.水噴淋試驗 |
(Packaging - Complete, filled transport packages and unit loads - Water-spray test) |
| BS EN ISO 2897-2-2004 |
塑料.耐沖擊聚苯乙烯(PS-I)模塑和擠塑材料.試樣制備和性能測定 |
|
| BS EN ISO 291-1997 |
塑料.調節和檢驗用的標準大氣壓 |
(Plastics - Standard atmospheres for conditioning and testing) |
| BS EN ISO 2922-2001 |
聲學.內河航道和港灣船舶發出的噪音測量 |
(Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours) |
| BS EN ISO 293-1988 |
塑料.熱塑性材料的壓塑試樣 |
(Plastics - Compression moulding test specimens of thermoplastic materials) |
| BS EN ISO 294-1-1997 |
塑料.熱塑材料試樣的噴射鑄造法.第1部分:一般原則,多途 |
(Plastics - Injection moulding of test specimens of thermoplastic materials - General principles, and moulding of multipurpose and bar test specimens) |
| BS EN ISO 294-2-1997 |
塑料.熱塑材料試樣的噴射鑄造法.第2部分:小拉伸棒 |
(Plastics - Injection moulding of test specimens of thermoplastic materials - Small tensile bars) |
| BS EN ISO 294-3-2003 |
塑料.熱塑性材料試樣的注射模塑法.小板 |
(Plastics - Injection moulding of test specimens of thermoplastic materials - Small plates) |
| BS EN ISO 294-4-2003 |
塑料.熱塑材料試樣的注塑法.第4部分:模塑收縮率的測定 |
(Plastics - Injection moulding of test specimens of thermoplastic materials - Determination of moulding shrinkage) |
| BS EN ISO 295-1992 |
塑料.熱固性材料的試樣壓塑 |
(Plastics - Compression moulding of test specimens of thermosetting materials) |
| BS EN ISO 295-2004 |
塑料.熱固性材料試樣的壓模塑法 |
|
| BS EN ISO 3001-1999 |
塑料.環氧化合物.環氧基當量的測定 |
(Plastics - Epoxy compounds - Determination of epoxy equivalent) |
| BS EN ISO 3037-1995 |
瓦楞纖維板.邊緣耐壓碎性的測定 |
(Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method)) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com