標準號 |
中文名稱 |
英文名稱 |
| BS EN ISO 14644-1-1999 |
無菌室和相關的受控環境.空氣清潔度的分級 |
(Cleanrooms and associated controlled environments - Classification of air cleanliness) |
| BS EN ISO 14644-2-2000 |
無菌室和相關控制環境.連續證明與ISO 14644-1相符的監測和試驗規范 |
(Cleanrooms and associated controlled environments - Specifications for testing and monitoring to prove continued compliance with ISO 14644-1) |
| BS EN ISO 14644-4-2001 |
無菌室和相關控制環境.設計、建造和運行 |
(Cleanrooms and associated controlled environments - Design, construction and start-up) |
| BS EN ISO 14644-5-2004 |
潔凈室和相關的受控環境.操作 |
|
| BS EN ISO 14644-7-2004 |
潔凈室和相關的受控環境.分離裝置(潔凈空氣罩、手套式操作箱、分離器和微環境) |
|
| BS EN ISO 14660-1-2000 |
產品幾何量技術規范(GPS).幾何特性.一般術語和定義 |
(Geometrical Product Specifications (GPS) - Geometrical features - General terms and definitions) |
| BS EN ISO 14660-2-2000 |
產品幾何量技術規范(GPS).幾何特性.圓柱體和圓錐體中心線的確定、表面中心的確定、確定位置尺寸的要求 |
(Geometrical Product Specifications (GPS) - Geometrical features - Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature) |
| BS EN ISO 14673-1-2001 |
奶和奶制品.硝酸鹽和亞硝酸鹽含量的測定.鎘還原和光譜法 |
(Milk and milk products - Determination of nitrate and nitrite contents - Method using cadmium reduction and spectrometry) |
| BS EN ISO 14673-1-2004 |
奶和奶制品.硝酸鹽和亞硝酸鹽含量的測定.鎘還原和光譜測定法 |
|
| BS EN ISO 14673-2-2001 |
奶和奶制品.硝酸鹽和亞硝酸鹽含量的測定.分段流動分析法(常規法) |
(Milk and milk products - Determination of nitrate and nitrite contents - Method using segmented flow analysis (Routine method)) |
| BS EN ISO 14673-2-2004 |
奶和奶制品.硝酸鹽和亞硝酸鹽含量的測定.分段流動分析法(常規法) |
|
| BS EN ISO 14673-3-2001 |
奶和奶制品.硝酸鹽和亞硝酸鹽含量的測定.采用鎘還原和整齊滲析的流動注入分析的方法(常規法) |
(Milk and milk products - Determination of nitrate and nitrite contents - Method using cadmium reduction and flow injection analysis with in-line dialysis (Routine method)) |
| BS EN ISO 14673-3-2004 |
奶和奶制品.硝酸鹽和亞硝酸鹽含量的測定.鎘還原和直接滲析流動注入分析法(常規法) |
|
| BS EN ISO 14675-2003 |
牛奶和牛奶制品.競爭酵素免疫分析的標準化描述指南.黃曲霉毒素M$D1含量的測定 |
(Milk and milk products - Guidelines for a standardized description of competitive enzyme immunoassays - Determination of aflatoxin M$D1 content) |
| BS EN ISO 14678-2005 |
膠粘劑.耐流動性測定(凹陷) |
|
| BS EN ISO 14683-1999 |
建筑結構中的熱橋.線性熱傳輸.簡化的方法和有缺陷閥門 |
(Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values) |
| BS EN ISO 14688-1-2002 |
土工技術研究和試驗.土壤的識別和分類.識別和描述 |
(Geotechnical investigation and testing - Identification and classification of soil - Identification and description) |
| BS EN ISO 14689-1-2004 |
土工調查和檢驗.巖石的識別與分類.識別與描述 |
|
| BS EN ISO 14691-2000 |
石油和天然氣工業.機械動力傳輸?shù)娜嵝择詈?一般用途 |
(Petroleum and natural gas industries - Flexible couplings for mechanical power transmission - General purpose applications) |
| BS EN ISO 14692-1-2003 |
石油和天然氣工業.玻璃增強塑料(GRP)管道.詞匯、符號、應用和材料 |
(Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Vocabulary, symbols, applications and materials) |
| BS EN ISO 14692-2-2003 |
石油和天然氣工業.玻璃增強塑料(GRP)管道.合格評定和生產 |
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Qualification and manufacture |
| BS EN ISO 14692-3-2003 |
石油和天然氣工業.玻璃增強塑料(GRP)管道.系統設計 |
(Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - System design) |
| BS EN ISO 14692-4-2003 |
石油和天然氣工業.玻璃增強塑料(GRP)管道.制造、安裝和運行 |
(Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Fabrication, installation and operation) |
| BS EN ISO 14693-2004 |
石油和天然氣工業.鉆井和油井輔助設備 |
|
| BS EN ISO 14698-1-2003 |
無菌室及相關控制環境.生物污染控制.一般原則和方法 |
(Cleanrooms and associated controlled environments - Biocontamination control - General principles and methods) |
| BS EN ISO 14698-2-2003 |
潔凈室和相關控制環境.生物污染控制.生物污染數據的評價和說明 |
(Cleanrooms and associated controlled environments - Biocontamination control - Evaluation and interpretation of biocontamination data) |
| BS EN ISO 14713-1999 |
鐵和鋼結構的防腐.鋅和鋁涂層.指南 |
(Protection against corrosion of iron and steel in structures - Zinc and aluminium coatings - Guidelines) |
| BS EN ISO 14723-2002 |
石油和天然氣工業.管道輸送系統.海下管道閥門 |
(Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves) |
| BS EN ISO 14726-1-2000 |
船舶和航海技術.管道系統容量的識別顏色.主顏色和介質 |
(Ships and marine technology - Identification colours for the content of piping systems - Main colours and media) |
| BS EN ISO 14727-1999 |
牙科植入物.與牙科植入物上部構造相連接的預制部件.技術文件內容 |
(Dental implants - Prefabricated parts connecting suprastructures to dental implants - Contents of technical file) |
| BS EN ISO 14729-2001 |
眼科光學.接觸鏡片護理產品.產品的微生物要求和試驗方法以及接觸鏡片衛生管理制度 |
(Ophthalmic optics - Contact lens care products - Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses) |
| BS EN ISO 14730-2000 |
眼科光學.接觸鏡片護理產品.抗菌防腐劑效果試驗和作廢日期測定指南 |
(Ophthalmic optics - Contact lens care products - Antimicrobial preservative efficacy testing and guidance on determining discard date) |
| BS EN ISO 14738-2002 |
機械安全.機械工作站設計對人體測量的要求 |
(Safety of machinery - Anthropometric requirements for the design of workstations at machinery) |
| BS EN ISO 14744-1-2001 |
焊接.電子束焊接機的驗收檢驗.原理和驗收條件 |
(Welding - Acceptance inspection of electron beam welding machines - Principles and acceptance conditions) |
| BS EN ISO 14744-2-2001 |
焊接.電子束焊接機的驗收檢驗.加速電壓特性測量 |
(Welding - Acceptance inspection of electron beam welding machines - Measurement of accelerating voltage characteristics) |
| BS EN ISO 14744-3-2001 |
焊接.電子束焊接機的驗收檢驗.束電流特性測量 |
(Welding - Acceptance inspection of electron beam welding machines - Measurement of beam current characteristics) |
| BS EN ISO 14744-4-2001 |
焊接.電子束焊接機的驗收檢驗.焊接速度的測量 |
(Welding - Acceptance inspection of electron beam welding machines - Measurement of welding speed) |
| BS EN ISO 14744-5-2001 |
焊接.電子束焊接機的驗收檢驗.使用準確度的測量 |
(Welding - Acceptance inspection of electron beam welding machines - Measurement of run-out accuracy) |
| BS EN ISO 14744-6-2001 |
焊接.電子束焊接機的驗收檢驗.電焊位置穩定性的測量 |
(Welding - Acceptance inspection of electron beam welding machines - Measurement of stability of spot position) |
| BS EN ISO 1478-2000 |
自攻螺紋螺釘 |
(Tapping screw thread) |
| BS EN ISO 1479-1995 |
六角頭自攻螺釘規范 |
(Specification for hexagon-head tapping screws) |
| BS EN ISO 14801-2003 |
牙科學.牙科植入物的疲勞試驗 |
(Dentistry - Fatigue test for endosseous dental implants) |
| BS EN ISO 1481-1995 |
開槽平頭絲錐螺釘規范 |
(Specification for slotted pan-head tapping screws) |
| BS EN ISO 14819-1-2003 |
交通和旅客信息(TTI).經過交通電文編碼的TTI電文.無線電數據系統的編碼協議.利用ALERT-C的交通電文信道(RDS |
(Traffic and Traveller Information (TTI) - TTI Messages via traffic message coding - Coding protocol for Radio Data System - Traffic Message Channel (RDS-TMC) using ALERT-C) |
| BS EN ISO 14819-2-2003 |
交通和旅客信息(TTI).經過交通電文編碼的TTI電文.無線電數據系統用事件和信息代碼.交通電文信道(RDS-TMC) |
(Traffic and Traveller Information (TTI) - TTI Messages via traffic message coding - Event and information codes for Radio Data System - Traffic Message Channel (RDS-TMC)) |
| BS EN ISO 14819-3-2004 |
交通和旅客信息(TTI).經過交通電文編碼的TTI信息.ALERT-C的位置參考 |
|
| BS EN ISO 14819-3-2004 |
交通和旅客信息(TTI).經過交通電文編碼的TTI信息.ALERT-C的定位 |
|
| BS EN ISO 1482-1995 |
開槽埋頭絲錐螺釘規范(普通型) |
(Specification for slotted countersunk (flat) head tapping screws (common head style)) |
| BS EN ISO 14825-2004 |
智能運輸系統.地理數據文檔(GDF).總體數據規范 |
|
| BS EN ISO 1483-1995 |
開槽埋頭絲錐螺釘(普通型) |
(Slotted raised countersunk (oval) head tapping screws (common head style)) |
| BS EN ISO 14847-1999 |
轉式變?nèi)菡婵毡?技術要求 |
(Rotary positive displacement pumps - Technical requirements) |
| BS EN ISO 14877-2002 |
小顆粒研磨產生摩擦引爆操作工用防護服 |
(Protective clothing for abrasive blasting operations using granular abrasives) |
| BS EN ISO 14880-1-2005 |
顯微透鏡系列.詞匯 |
|
| BS EN ISO 14881-2005 |
集成光學.接口.有關耦合特性的參數 |
|
| BS EN ISO 14889-2003 |
眼科光學.眼鏡鏡片.未切精加工眼鏡片的基本要求 |
(Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncut finished lenses) |
| BS EN ISO 14890-2003 |
輸送帶.通用織物結構的橡膠或塑料包覆的輸送帶規范 |
(Conveyor belts - Specification for rubber or plastics covered conveyor belts of textile construction for general use) |
| BS EN ISO 14891-2002 |
牛奶和奶制品.測定氮含量.根據 Dumas原理使用常規燃燒法 |
(Milk and milk products - Determination of nitrogen content - Routine method using combustion according to the Dumas principle) |
| BS EN ISO 14895-2003 |
小艇.液體燃料廚灶 |
(Small craft - Liquid-fuelled galley stoves) |
| BS EN ISO 14896-2001 |
塑料.聚氨酯原材料.異氰酸酯的含量測定 |
(Plastics - Polyurethane raw materials - Determination of isocyanate content) |
| BS EN ISO 14902-2001 |
動物飼料.大豆制品胰蛋白酶抑制劑活性的測定 |
(Animal feeding stuffs - Determination of trypsin inhibitor activity of soya products) |
| BS EN ISO 14906-2004 |
道路運輸和交通信息技術.電子自動收費系統.短程通信的應用接口定義 |
|
| BS EN ISO 14911-1999 |
水質.用離子色譜法測定溶解的Li |
(Water quality - Determination of dissolved Li) |
| BS EN ISO 14915-1-2002 |
多媒體用戶接口的軟件人類工效學.設計原理和框架 |
(Software ergonomics for multimedia user interfaces - Design principles and framework) |
| BS EN ISO 14915-2-2003 |
多媒體用戶接口用軟件人類工效學.多媒體導航和控制 |
(Software ergonomics for multimedia user interfaces - Multimedia navigation and control) |
| BS EN ISO 14915-3-2002 |
多媒體用戶接口用軟件人類工效學.媒介選擇和結合 |
(Software ergonomics for multimedia user interfaces - Media selection and combination) |
| BS EN ISO 14918-1998 |
熱噴涂.熱噴涂器的驗收試驗 |
(Thermal spraying - Approval testing of thermal sprayers) |
| BS EN ISO 14919-2001 |
熱噴涂.熔噴和電弧噴涂用線材、桿材和軟線.分類.技術支持條件 |
(Thermal spraying, Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions) |
| BS EN ISO 14920-1999 |
熱噴鍍.自熔化合金的熔化和噴鍍 |
(Thermal spraying - Spraying and fusing of self-fluxing alloys) |
| BS EN ISO 14921-2001 |
熱噴涂.工程件的熱噴涂應用過程 |
(Thermal spraying - Procedure for the application of thermally sprayed coatings for engineering components) |
| BS EN ISO 14922-1-1999 |
熱噴鍍.熱噴鍍結構的質量要求.選擇和使用導則 |
(Thermal spraying - Quality requirements of thermally sprayed structures - Guidance for selection and use) |
| BS EN ISO 14922-2-1999 |
熱噴鍍.熱噴鍍結構的質量要求.綜合質量要求 |
(Thermal spraying - Quality requirements of thermally sprayed structures - Comprehensive quality requirements) |
| BS EN ISO 14922-3-1999 |
熱噴鍍.熱噴鍍結構的質量要求.標準質量要求 |
(Thermal spraying - Quality requirements of thermally sprayed structures - Standard quality requirements) |
| BS EN ISO 14922-4-1999 |
熱噴鍍.熱噴鍍結構的質量要求.基本質量要求 |
(Thermal spraying - Quality requirements of thermally sprayed structures - Elementary quality requirements) |
| BS EN ISO 14923-2003 |
熱噴鍍.熱噴鍍層的特征和檢驗 |
(Thermal spraying - Characterization and testing of thermally sprayed coatings) |
| BS EN ISO 14924-2005 |
熱噴涂.熱噴涂覆層的后處理和精加工 |
|
| BS EN ISO 14931-2004 |
皮革.制衣用皮革的選擇指南(毛皮除外) |
|
| BS EN ISO 14935-1999 |
石油及其相關產品.耐火流體的吸油繩燃燒持久性測定 |
(Petroleum and related products - Determination of wick flame persistence of fire-resistant fluids) |
| BS EN ISO 14937-2001 |
保健產品的消毒.醫療設備消毒過程的制定、批準和常規控制一般要求 |
(Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devi) |
| BS EN ISO 14939-2001 |
動物飼料.用高效液相色譜法測定卡巴氧的含量 |
(Animal feeding stuffs - Determination of carbadox content - Method using high performance liquid chromatography) |
| BS EN ISO 14945-2004 |
小艇.制造者銘牌 |
|
| BS EN ISO 14946-2001 |
小型船舶.最大荷載能力 |
(Small craft - Maximum load capacity) |
| BS EN ISO 14956-2002 |
空氣質量.用測量不確定度比較法評估測量程序適應性 |
(Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty) |
| BS EN ISO 14971-2001 |
醫療器械.醫療器械風險管理的應用 |
(Medical devices - Application of risk management to medical devices) |
| BS EN ISO 14982-1998 |
農業和林業機械.電磁兼容性.試驗方法和驗收標準 |
(Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria) |
| BS EN ISO 15004-1998 |
眼科設備.基本要求和試驗方法 |
(Ophthalmic instruments - Fundamental requirements and test methods) |
| BS EN ISO 15005-2002 |
道路車輛.運輸信息和控制系統的人類工效學特性.對話管理原則和一致性程序 |
(Road vehicles - Ergonomic aspects of transport information and control systems - Dialogue management principles and compliance procedures) |
| BS EN ISO 15006-2004 |
道路車輛.交通信息和控制系統的人類工程學方面.車內聲音信號表示規范和聲順性規程 |
|
| BS EN ISO 15007-1-2002 |
道路車輛.與運輸信息和控制系統有關的司機目視行為的測量.定義和參數 |
(Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Definitions and parameters) |
| BS EN ISO 15008-2003 |
道路車輛.運輸信息和控制系統的人類工效學.車內可視顯示規范和一致性規程 |
(Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and compliance procedures for in-vehicle visual presentation) |
| BS EN ISO 15011-1-2002 |
焊接和有關過程中的健康和安全.電弧焊接產生的煙塵和氣體的實驗室取樣方法.排放率測定和顆粒煙塵分析的取樣 |
(Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Determination of emission rate and sampling for analysis of particulate fum) |
| BS EN ISO 15011-2-2003 |
焊接和相關工藝的衛生和安全.電弧焊產生的煙和氣體取樣的實驗室法.除臭氧外的氣體排放率的測定 |
(Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Determination of emission rates of gases, except ozone) |
| BS EN ISO 15011-3-2002 |
焊接和相關工藝的衛生和安全.電弧焊產生的煙和氣體取樣的實驗室法.用固定點測量法測定臭氧濃度 |
(Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Determination of ozone concentration using fixed point measurements) |
| BS EN ISO 15012-1-2005 |
焊接和相關工藝中的健康和安全.空氣過濾用設備的試驗和標記要求.焊接煙塵分離效率的試驗 |
|
| BS EN ISO 15013-1999 |
聚丙烯擠壓片材(PP).要求和試驗方法 |
(Extruded sheets of polypropylene (PP) - Requirements and test methods) |
| BS EN ISO 15025-2002 |
防護服.防熱和火.限制火焰蔓延的試驗方法 |
(Protective clothing - Protection against heat and flame - Method of test for limited flame spread) |
| BS EN ISO 15027-1-2002 |
浸漬服裝.耐磨服裝,包括安全的要求 |
(Immersion suits - Constant wear suits, requirements including safety) |
| BS EN ISO 15027-2-2002 |
浸漬服裝.廢棄的服裝,包括安全的要求 |
(Immersion suits - Abandonment suits, requirements including safety) |
| BS EN ISO 15027-3-2002 |
浸漬服裝的試驗方法 |
(Immersion suits - Test methods) |
| BS EN ISO 15029-1-2000 |
石油和相關產品.耐火液體噴射點燃特性的測定.噴射火焰持久性.空心錐形噴嘴法 |
(Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Spray flame persistence - Hollow-cone nozzle method) |
| BS EN ISO 15061-2001 |
水質.不溶溴酸鹽含量的測定.離子液相色譜法 |
(Water quality - Determination of dissolved bromate - Method by liquid chromatography of ions) |
| BS EN ISO 15065-2005 |
頭部外形符合ISO 7721標準的沉頭螺釘?shù)穆耦^孔 |
|
| BS EN ISO 15083-2003 |
小艇.艙底污水抽吸系統 |
(Small craft - Bilge-pumping systems) |
| BS EN ISO 15084-2003 |
小艇.投錨、停泊和牽引.靠船墩 |
(Small craft - Anchoring, mooring and towing - Strong points) |
| BS EN ISO 15085-2003 |
小艇.人員落水的預防和救護 |
(Small craft - Man-overboard prevention and recovery) |
| BS EN ISO 15087-1-2001 |
牙科起子.一般要求 |
(Dental elevators - General requirements) |
| BS EN ISO 15087-2-2000 |
牙科起子.沃里克吉姆斯起子 |
(Dental elevators - Warwick James elevators) |
| BS EN ISO 15087-3-2000 |
牙科起子.CRYER起子 |
(Dental elevators - Cryer elevators) |
| BS EN ISO 15087-4-2000 |
牙科起子.COUPLAND起子 |
(Dental elevators - Coupland elevators) |
| BS EN ISO 15087-5-2000 |
牙科起子.BEIN起子 |
(Dental elevators - Bein elevators) |
| BS EN ISO 15087-6-2000 |
牙科起子.FLOHR起子 |
(Dental elevators - Flohr elevators) |
| BS EN ISO 15098-1-2001 |
牙科鑷子.一般要求 |
(Dental tweezers - General requirements) |
| BS EN ISO 15098-2-2000 |
牙科鉗子.Meriam型 |
(Dental tweezers - Meriam types) |
| BS EN ISO 15098-3-2000 |
牙科鉗子.學院型 |
(Dental tweezers - College types) |
| BS EN ISO 15103-1-2004 |
塑料.聚乙烯聚酯模塑和擠制材料.命名系統和基本規范 |
|
| BS EN ISO 15103-2-2004 |
塑料.聚苯撐醚(PPE)模塑和擠塑材料.試樣制備和性能測定 |
|
| BS EN ISO 15103-2-2004 |
塑料.聚苯撐醚(PPE)模塑和擠塑材料.試樣制備和性能測定 |
|
| BS EN ISO 15106-1-2005 |
塑料.薄膜和薄片.水蒸氣傳輸率的測定.濕度探測傳感器法 |
|
| BS EN ISO 15106-2-2005 |
塑料.薄膜和薄片.水蒸氣傳輸率的測定.紅外探測傳感器法 |
|
| BS EN ISO 15106-3-2005 |
塑料.薄膜和薄片.水蒸氣傳輸率的測定.電解探測傳感器法 |
|
| BS EN ISO 1513-1993 |
色漆和清漆.試驗樣品的檢驗和制備 |
(Paints and varnishes - Examination and preparation of samples for testing) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com