標準號 |
中文名稱 |
英文名稱 |
| BS 3993-1966 |
商業用1型 和2型鹽酸規范 |
(Specification for hydrochloric acid, commercial types 1 and 2) |
| BS 3996-1978 |
單標志和刻度移液管的色碼(包括色碼釉層使用性能的要求)規范 |
(Specification for colour coding for one-mark and graduated pipettes (including requirements for the service performance of the colour coding enamels)) |
| BS 3998-1989 |
森林管理推薦規范 |
(Recommendations for tree work) |
| BS 3999-1-1993 |
家用電器性能的測量方法.電水壺 |
(Methods of measuring the performance of household electrical appliances - Electric kettles and jugs) |
| BS 3999-16-1993 |
家用電器性能的測量方法.電加熱板 |
(Methods of measuring the performance of household electrical appliances - Electric warming plates) |
| BS 3999-17-1993 |
家用電器性能測量方法.手提式電源電壓操作的噴槍 |
(Methods of measuring the performance of household electrical appliances - Hand-held mains voltage operated spray guns) |
| BS 3999-2-1991 |
家用電器性能的測量方法.儲熱式電熱水器 |
(Methods of measuring the performance of household electrical appliances - Thermal storage electric water-heaters) |
| BS 3999-4-1967 |
家用電器性能的測量方法.第4部分:電烘衣箱及架 |
(Methods of measuring the performance of household electrical appliances - Electric clothes drying cabinets and racks) |
| BS 3A 100-1991 |
抗拉強度不大于1249MPa的螺栓和自由轉動螺母的一般要求規范 |
(Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa) |
| BS 3A 103-1962 |
飛行器用鋼螺母(統一六邊形統一螺紋)(普通形、薄形、槽形和槽頂形)規范 |
(Specification for steel nuts (Unified hexagons and Unified threads) (ordinary, thin, slotted and castle) for aircraft) |
| BS 3A 105-1962 |
飛行器用抗腐蝕鋼螺母(統一六角形、統一螺紋)(普通形、薄形、槽形和槽頂形)規范 |
(Specification for corrosion-resisting steel nuts (Unified hexagons and Unified threads) (ordinary, thin, slotted and castle) for aircraft) |
| BS 3A 107-1962 |
飛行器用鋁合金螺母(統一六角形和統一螺紋)(普通和開槽形)規范 |
(Specification for aluminium alloy nuts (Unified hexagons and Unified threads) (ordinary and slotted) for aircraft) |
| BS 3A 108-1962 |
飛行器用緊公差鋼螺栓(統一六角頭和統一螺紋)規范 |
(Specification for steel bolts (Unified hexagons and Unified threads) with close tolerance shanks for aircraft) |
| BS 3A 109-1985 |
鋼制抗剪螺栓(統一六角頭和統一螺紋)規范 |
(Specification for steel shear bolts (Unified hexagons and Unified threads)) |
| BS 3A 116-1962 |
飛行器用鋼平錐頭螺栓(統一螺紋)規范 |
(Specification for steel pan head bolts (Unified threads) for aircraft) |
| BS 3A 117-1962 |
飛行器用抗腐蝕鋼平錐頭螺栓(統一螺紋)規范 |
(Specification for corrosion-resisting steel pan head bolts (Unified threads) for aircraft) |
| BS 3A 125 to 3A 132, 3A 136 to |
航天器用系緊螺母(統一螺紋)規范 |
(Specification for stiffnuts (Unified threads) for aircraft) |
| BS 3A 125 to 3A 132-1981 |
飛行器用剛性螺母(統一螺紋)規范 |
(Specification for stiffnuts (Unified threads) for aircraft) |
| BS 3A 125 to 3A [...]-1981 |
飛行器用防松螺帽規范(統一螺紋) |
(Specification for stiffnuts (Unified threads) for aircraft) |
| BS 3A 171-1962 |
飛行器鋁合金平錐頭螺栓(統一螺紋)規范 |
(Specification for aluminium alloy pan head bolts (Unified threads) for aircraft) |
| BS 3A 212-1993 |
55/65 tonf/in |
(Specification for cadmium-plated steel bolts, 55/65 tonf/inUP2 (Unified hexagons, 3A Unified threads and close tolerance shanks)) |
| BS 3C 7-1989 |
飛機輪胎汽門嘴規范:互換性尺寸 |
(Specification for aircraft tyre valves: interchangeability dimensions) |
| BS 3F 114-1995 |
每平方米重80克馬德波勒姆細布纖維規范 |
(Specification for 80 g/m) |
| BS 3F 116-1995 |
絲光棉纖維規范 |
(Specification for mercerized cotton fabric) |
| BS 3F 121-1995 |
航空航天用金屬滑動緊固件規范 |
(Specification for metallic slide fasteners for aerospace purposes) |
| BS 3F 122-1990 |
充氣救生船的降落傘用氯丁橡膠夾層的雙層棉織物規范 |
(Specification for two ply cotton fabric interlayered with polychloroprene for liferaft packs) |
| BS 3F 126-2002 |
35g/m |
(35 g/mUP2 nylon parachute fabric) |
| BS 3F 129-2003 |
航空航天用聚酯窄織物 |
(Woven polyester narrow fabrics for aerospace purposes) |
| BS 3F 135-2002 |
航空航天用無規定尺寸穩定性的尼龍編織繩 |
(Braided nylon cord with unspecified dimensional stability for aerospace purposes) |
| BS 3F 63-1981 |
飛機用低壓氧氣軟管規范 |
(Specification for low pressure oxygen hose for aeronautical purposes) |
| BS 3F 65-1991 |
航空飛機用氧氣和空氣輸送撓性波紋管(天然或合成聚異戊二烯)規范 |
(Specification for flexible corrugated oxygen and air tubes for aircraft (natural or synthetic polyisoprene)) |
| BS 3F 69-1979 |
硫化橡膠產品包裝標志規范 |
(Specification for packaging and identification of vulcanized rubber items) |
| BS 3F 70-1991 |
重型編織橡皮繩規范 |
(Specification for heavy duty braided rubber cord) |
| BS 3F 71-1991 |
輕型橡膠編織軟索規格 |
(Specification for light duty braided rubber cord) |
| BS 3G 100-1-1973 |
航空用設備的一般要求規范.第1部分:標志說明 |
(Specification for general requirements for equipment for use in aircraft - Identification and declarations) |
| BS 3G 100-2.2-1972 |
航空用設備的一般要求規范.第2部分:各種設備.第2節:磁效應 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Magnetic influence) |
| BS 3G 100-2.3.0-1972 |
航空用設備的一般要求規范.各種設備.環境條件.標準試驗要求 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Standard test requirements) |
| BS 3G 100-2.3.1-1969 |
航空用設備的一般要求規范.各種設備.環境條件.振動 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Vibration) |
| BS 3G 100-2.3.10-1974 |
航空用設備的一般要求規范.第2部分:各種設備.第3節:環境條件.第10小節:碰撞冰 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Impact icing) |
| BS 3G 100-2.3.11-1973 |
航空用設備的一般要求規范.第2部分:各種設備.第3節:環境條件.第11小節:防水性 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Water-proofness) |
| BS 3G 100-2.3.12-1991 |
航空用設備的一般要求規范.各種設備.環境條件.流體污染 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Fluid contamination) |
| BS 3G 100-2.3.13-1973 |
航空用設備的一般要求規范.第2部分:各種設備.第3節:環境條件.第13小節:規定防火區的防火性 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Resistance to fire in designated fire zones) |
| BS 3G 100-2.3.14-1973 |
航空用設備的一般要求規范.第2部分:各種設備.第3節:環境條件.第14小節:聲震 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Acoustic vibration) |
| BS 3G 100-2.3.15-1978 |
航空用設備的一般要求規范.第2部分:各種設備.第3節:環境條件.第15小節:溫度變化 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Change of temperature) |
| BS 3G 100-2.3.2-1970 |
航空用設備的一般要求規范.各種設備.環境條件.溫度壓力要求 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Temperature-pressure requirements) |
| BS 3G 100-2.3.3-1972 |
航空用設備的一般要求規范.各種設備.環境條件.霉菌生長 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Mould growth) |
| BS 3G 100-2.3.4-1972 |
航空用設備的一般要求規范.各種設備.環境條件.壓差要求 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Differential pressure requirements) |
| BS 3G 100-2.3.5-1972 |
航空用設備的一般要求規范.第2部分:各種設備.第3節:環境條件.第5小節:防爆性 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Explosion-proofness) |
| BS 3G 100-2.3.6-1972 |
航空用設備的一般要求規范.第2部分:各種設備.第3節:環境條件.第6小節:加速度要求 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Acceleration requirements) |
| BS 3G 100-2.3.7-1972 |
航空用設備的一般要求規范.各種設備.環境條件.熱帶環境 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Tropical exposure) |
| BS 3G 100-2.3.8-1972 |
航空用設備的一般要求規范.各種設備.環境條件.鹽霧 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Salt mist) |
| BS 3G 100-2.3.9-1972 |
航空用設備的一般要求規范.各種設備.環境條件.結冰 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Ice formation) |
| BS 3G 100-3-1979 |
航空用設備的一般要求規范.第3部分:航空供電的特性 |
(Specification for general requirements for equipment for use in aircraft - Characteristics of aircraft electrical power supplies) |
| BS 3G 100-4.1-1973 |
航空用設備的一般要求規范.第4部分:電氣設備.第1節:結構和總則.第1小節:電絕緣試驗 |
(Specification for general requirements for equipment for use in aircraft - Electrical equipment - Construction and general) |
| BS 3G 100-4.1.1-1982 |
飛機用設備的一般要求規范.電氣設備.結構和總則.電絕緣試驗 |
(Specification for general requirements for equipment for use in aircraft - Electrical equipment - Construction and general - Electrical insulation tests) |
| BS 3G 100-4.2-1980 |
航空用設備的一般要求規范.第4部分:電氣設備.第2節:無線電和音頻的電磁干擾 |
(Specification for general requirements for equipment for use in aircraft - Electrical equipment - Electromagnetic interference at radio and audio frequencies) |
| BS 3G 101-1987 |
機械和機電式航空指示儀的一般要求規范 |
(Specification for general requirements for mechanical and electromechanical aircraft indicators) |
| BS 3G 148-1981 |
飛機一般用途的鉑溫度傳感器規范 |
(Specification for general purpose platinum temperature sensors for aircraft) |
| BS 3G 197-1982 |
飛機用電纜終端的柱式接線板規范 |
(Specification for stud-type terminal blocks for terminations on aircraft electric cables) |
| BS 3G 198-2-1997 |
飛行器電纜和設備線用套管.識別用活動套管說明 |
(Sleeves for aircraft electric cables and equipment wires - Specification for slip-on sleeves for identification purposes) |
| BS 3G 198-4-1996 |
航空電纜和設備電線用套.第4部分:粘結和絕緣用碳氟化合物熱收縮套管規范 |
(Sleeves for aircraft electric cables and equipment wires - Specification for fluoropolymer heat shrinkable sleeving for binding and insulation) |
| BS 3G 210-1996 |
單芯和多芯鍍銀銅導體(190℃)或鍍鎳銅導體(260℃)PTFE絕緣設備軟線和電纜規范 |
(Specification for PTFE insulated equipment wires and cables, single- and multi-core, with silver plated copper conductors (190 鳦) or nickel plated copper conductors (260 鳦)) |
| BS 3G 231-1997 |
普通飛機用電纜和航空航天設備用導電體規范 |
(Specification for conductors for general-purpose aircraft electrical cables and aerospace applications) |
| BS 3G 233-1990 |
普通機體或設備互連用(135℃)擠制絕緣電纜規范 |
(Specification for electric cables for general airframe or equipment interconnect use (135 鳦), extruded insulation) |
| BS 3HR 100-1978 |
可鍛耐熱合金的檢驗和試驗規程 |
(Procedure for inspection and testing of wrought heat-resisting alloys) |
| BS 3HR 601-1989 |
制造緊固件(最大直徑或較小截面尺寸為30mm)用鎳-鉻-鈦-鋁耐熱合金棒材和線材(鎳基Cr19.5、Ti2.2、Al1.4)規 |
(Specification for nickel-chromium-titanium-aluminium heat-resisting alloy bar and wire for the manufacture of fasteners (maximum diameter or minor sectional dimension 30 mm)(nickel base Cr 19.5, Ti 2) |
| BS 3J 12-1991 |
壓敏膠粘識別帶規范 |
(Specification for pressure-sensitive adhesive identification tape) |
| BS 3L 122-1970 |
鎂-鋁(8)-鋅(0.5)-錳(0.3)合金鑄錠和鑄件規范(溶液處理) |
(Specification for ingots and castings of magnesium-8% aluminium-zinc-manganese alloy (solution treated) (Al 8, Zn 0.5, Mn 0.3)) |
| BS 3L 124-1970 |
鎂-鋁(10)-鋅(0.5)-錳(0.3)合金鑄錠和鑄件規范(溶液處理) |
(Specification for ingots and castings of magnesium - 10% aluminium-zinc-manganese alloy (solution treated)(Al 10, Zn 0.5, Mn 0.3)) |
| BS 3L 125-1970 |
鎂-鋁(10)-鋅(0.5)-錳(0.3)合金鑄錠和鑄件規范(溶液處理和沉淀處理) |
(Specification for ingots and castings of magnesium - 10% aluminium-zinc-manganese alloy (solution treated and precipitation treated) (Al 10, Zn 0.5, Mn 0.3)) |
| BS 3L 51-1970 |
鋁-硅(2.5)-銅(1.2)-鎳(1.0)-鎂(0.1)-鐵(1.0)合金鑄錠和鑄件規范(沉淀熱處理) |
(Specification for ingots and castings of aluminium-silicon-copper-iron-nickel-magnesium alloy (precipitation treated)(Si 2.5, Cu 1.2, Fe 1, Ni 1, Mg 0.1)) |
| BS 3L 63-1971 |
鋁銅鎂硅錳合金管規范(溶解和沉降處理)(銅4.4,鎂0.5,硅0.7,錳0.8) |
(Specification for tube of aluminium-copper-mangesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)) |
| BS 3L 78-1970 |
鋁-硅(5)-銅(1.2)-鎂(0.5)合金鑄錠和鑄件規范(溶液處理和熱處理) |
(Specification for ingots and castings of aluminium-silicon-copper-magnesium alloy (solution treated and precipitation treated) (Si 5, Cu 1.2, Mg 0.5)) |
| BS 3L 80-1985 |
鋁-鎂2.25%合金搴痛墓娣回火號為0) |
(Specification for sheet and strip of aluminium-2) |
| BS 3L 81-1985 |
鋁-鎂2.25%合金薄板材和帶材規范(回火號為H16或H26) |
(Specification for sheet and strip of aluminium-2) |
| BS 3L 86-1971 |
鋁-銅(2.5)-鎂(0.3)合金冷鍛鉚釘用實心鋼絲規范(直徑不超過10mm) |
(Specification for wire for solid, cold-forged rivets of aluminium-copper-magnesium alloy (not exceeding 10 mm diameter) (Cu 2.5, Mg 0.3)) |
| BS 3M 45-2-1998 |
飛行器輪胎和輪輞.輪胎的試驗方法 |
(Aircraft tyres and rims - Test methods for tyres) |
| BS 3M 60-1998 |
液體系統用24度錐形可分開管道配件.通用規范 |
(Separable tube fittings for fluid systems, 24 ?cone - General specification) |
| BS 3N 3-2000 |
飛行器用供氧裝置 |
(Breathing oxygen for airborne applications) |
| BS 3S 102-1969 |
碳鉬鋼(僅供鍛造螺栓用的棒材)規范 |
(Specification for carbon-molybdenum steel (bar for the manufacture of forged bolts only)) |
| BS 3S 105-1969 |
碳素鋼規范(僅供鍛造螺栓用的棒材) |
(Specification for carbon steel (bar for the manufacture of forged bolts only)) |
| BS 3S 132-1976 |
含3%鉻-鉬-釩鋼坯、棒材、鍛件及零件規范.(1320-1470MPa;限定等圓斷面70mm)(適用于氮化) |
(Specification - 3% chromium-molybdenum-vanadium steel billets, bars, forgings and parts (1320-1470 MPa: limiting ruling section 70 mm) (suitable for nitriding)) |
| BS 3S 144-1995 |
鉻-鎳-銅-鉬耐腐蝕(沉淀硬化)鋼坯,棒材,鍛件和部件(1130-1130MPa)規范 |
(Specification for chromium-nickel-copper-molybdenum corrosion resisting steel (precipitation hardening) billets, bars, forgings and parts (1130-1330 MPa)) |
| BS 3S 145-1996 |
鉻-鎳-銅-鉬耐腐蝕鋼(沉淀硬化)方坯、棒材、鍛件及零件規范(1270-1470MPa) |
(Specification for chromium-nickel-copper-molybdenum corrosion resisting steel (precipitation hardening) billets, bars, forgings and parts (1270 MPa to 1470 MPa)) |
| BS 3S 500-1996 |
鋼板和鋼帶檢驗、試驗及驗收程序 |
(Procedure for inspection, testing and acceptance of steel sheet and strip) |
| BS 3S 61-1964 |
航空材料規范.含12%鉻耐腐蝕鋼(35/45噸力/平方英寸:限定等圓斷面6英寸) |
(Specification for aircraft material - 12 per cent chromium corrosion-resisting steel (35/45 tonf/sq in: limiting ruling section 6 in)) |
| BS 3S 62-1964 |
航空材料規范.含12%鉻耐腐蝕鋼(45/55噸力/平方英寸限定等圓斷面6英寸) |
(Specification for aircraft material - 12 per cent chromium corrosion-resisting steel (45/55 tonf/sq in: limiting ruling section 6 in)) |
| BS 3S 91-1977 |
低碳鋼方坯、棒材、鍛件和零件規范(適于軸瓦外殼) |
(Specification for mild steel billets, bars, forgings and parts (suitable for bearing shells)) |
| BS 3S 95-1967 |
含1 |
(Specification for 1) |
| BS 3SP 168-169-2002 |
航空航天用的編織橡膠繩外用套管和組合金屬絲 |
(Ferrules and assembly wires for braided rubber cord assemblies for aerospace use) |
| BS 3SP 170-171-2002 |
航空航天用編織橡膠繩組件 |
(Braided rubber cord assemblies for aerospace use) |
| BS 3SP 3-1943 |
航空材料規范.叉形接頭(低強度型)(尺寸自N0.4B.A至) |
(Specification for aircraft material - Fork joints (low tensile type) (for sizes No. 4 B.A. to) |
| BS 3SP 89-1983 |
飛機機架軸承的特性、限定尺寸及靜荷載等級規范 |
(Specification for characteristics, boundary dimensions, tolerances and static load ratings of airframe bearings) |
| BS 3T 51-1945 |
飛機機架軸承的特性、限定尺寸及靜荷載等級規范 |
(Specification for aircraft material - High pressure seamless copper tubes) |
| BS 3T 53-1980 |
鉻-鉬鋼管規范(700MPa)(管外徑不小于12.5mm)(可焊接) |
(Specification for chromium-molybdenum steel tube (700 MPa) (outside diameter not less than 12.5 mm) (weldable)) |
| BS 3T 60-1980 |
鉻-鉬鋼管規范(1150MPa)(最大厚度8mm) |
(Specification for chromium-molybdenum steel tube (1150 MPa) (maximum thickness 8 mm)) |
| BS 3V 4-1929 |
航空材料規范.槐木 |
(Specification for aircraft material - Ash) |
| BS 4-1-1993 |
結構鋼型材.熱軋型鋼規范 |
(Structural steel sections - Specification for hot-rolled sections) |
| BS 4-1-2005 |
結構鋼型材.熱軋型鋼的規范 |
|
| BS 4000-1-1990 |
紙和紙板的尺寸.第1部分:書寫紙和某些印刷品的A系列和B系列切邊尺寸規范 |
(Sizes of paper and board - Specification for A and B series of trimmed sizes of writing paper and certain classes of printed matters) |
| BS 4001-1-1998 |
水下呼吸裝置的維護和保養.壓縮空氣開路式裝置推薦標準 |
(Care and maintenance of underwater breathing apparatus - Recommendations for the compressed air open circuit type) |
| BS 4001-2-1967 |
水下呼吸裝具的維護和保養.第2部分:標準潛水裝置 |
(Care and maintenance of underwater breathing apparatus - Standard diving equipment) |
| BS 4006-1992 |
手動方頭套筒扳手和附件規范 |
(Specification for hand operated square drive socket wrenches and accessories) |
| BS 4008-1992 |
牲畜柵欄規范 |
(Specification for cattle grids) |
| BS 4009-1991 |
助聽器及聽力計中骨傳導振動器校準用仿真乳突規范 |
(Specification for artificial mastoids for the calibration of bone vibrators used in hearing aids and audiometers) |
| BS 4016-1997 |
柔性建筑用薄膜材料(通氣型)規范 |
(Specification for flexible building membranes (breather type)) |
| BS 4018-1966 |
最大組合提升力為25T的鋼絲繩滑輪組規范 |
(Specification for pulley blocks for use with wire rope for a maximum lift of 25 tonf in combination) |
| BS 4019-3-1993 |
旋轉鉆芯設備規范.A系統規范:米制單位 |
(Rotary core drilling equipment - Specification for System A. Metric units) |
| BS 4019-4-1993 |
旋轉鉆芯設備規范.A系統規范:英制單位 |
(Rotary core drilling equipment - Specification for System A. Inch units) |
| BS 4019-5-1999 |
旋轉鉆芯設備.旋轉鉆心設備.鋼繩金剛石鉆孔設備規范.A系統:米制單位 |
(Rotary core drilling equipment - Rotary core drilling equipment - Specification for wireline diamond drilling equipment - System A. Metric units) |
| BS 4022-1970 |
預制石膏墻板鑲板規范 |
(Specification for prefabricated gypsum wallboard panels) |
| BS 4023-1975 |
軟微孔聚氯乙烯片材規范 |
(Specification for flexible cellular PVC sheeting) |
| BS 4024-1966 |
五氯苯基月桂酸規范 |
(Specification for pentachlorophenyl laurate) |
| BS 4027-1996 |
耐硫酸鹽水泥的規范 |
(Specification for sulfate-resisting Portland cement) |
| BS 4029-1978 |
測定單纖維與長纖維拉伸彈性恢復力的試驗方法(等速伸長試驗機) |
(Method of test for the determination of tensile elastic recovery of single fibres and filaments (constant-rate-of-extension machines)) |
| BS 4031-1966 |
X 射線防護用鋁玻璃規范 |
(Specification for X-ray protective lead glasses) |
| BS 4032-1978 |
纖維素纖維或合成纖維、紗線及織物或由這些纖維混紡的紗線及織物中水溶性或堿溶性添加劑測定的試驗方法 |
(Method of test for the determination of certain water- or alkali-soluble additives in cellulosic or synthetic fibres, yarns and fabrics or yarns and fabrics made from blends of such fibres) |
| BS 4034-1990 |
上釉餐具規范 |
(Specification for vitrified hotelware) |
| BS 4040-2001 |
機動車輛用加鉛汽油規范 |
(Specification for leaded petrol (gasoline) for motor vehicles) |
| BS 4043-1989 |
根部帶土移栽樹推薦標準 |
(Recommendations for transplanting root-balled trees) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com