標準號 |
中文名稱 |
英文名稱 |
| BS ISO 6142-2001 |
氣體分析.校正用混合氣體的制備.稱重法 |
Gas analysis - Preparation of calibration gas mixtures - Gravimetric method |
| BS ISO 6143-2001 |
氣體分析.校準用混合氣體成分的測定和檢驗.比較方法 |
Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures |
| BS ISO 6144-2003 |
氣體分析.標定用混合氣體的制備.靜態容量法 |
(Gas analysis - Preparation of calibration gas mixtures - Static volumetric method) |
| BS ISO 6145-1-2004 |
氣體分析.動態容量法制備標定用混合氣體.校準方法 |
|
| BS ISO 6145-10-2002 |
氣體分析.用動態容積法標定氣體混合物的制備.滲透法 |
Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Permeation method |
| BS ISO 6145-2-2001 |
氣體分析.標定用混合氣體的制備.動態容量法.容量計泵 |
Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Volumetric pumps |
| BS ISO 6145-4-2005 |
氣體分析.用動態容量法制備標定用混合氣體.持續噴射器注入法 |
|
| BS ISO 6145-5-2001 |
氣體分析.標定用混合氣體的制備.動態容量法.毛細管校正裝置 |
Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Capillary calibration devices |
| BS ISO 6145-6-2003 |
氣體分析.標定用混合氣體的制備.動態容量法.臨界孔口 |
(Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Critical orifices) |
| BS ISO 6145-7-2001 |
氣體分析.標定用混合氣體的制備.動態容量法.熱物流控制器 |
Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Thermal mass-flow controllers |
| BS ISO 6145-8-2005 |
氣體分析.用動態容積法制備標定用氣體混合物.擴散法 |
|
| BS ISO 6148-2001 |
攝影.縮微攝影膠片、片盤和卷軸.尺寸 |
Photography - Micrographic films, spools and cores - Dimensions |
| BS ISO 6149-1-1995 |
液壓傳動的連接和一般應用.油口和具有ISO261螺紋和O型環密封的螺柱端頭.第1部分:載頭殼體內具有O形環的油口 |
Connections for fluid power and general use - Ports and stud ends with ISO 261 threads and O-ring sealing - Ports with O-ring in truncated housing |
| BS ISO 6149-2-1995 |
液壓傳動的連接和一般應用.油口和具有ISO261螺紋和O型環密封的螺柱端頭.第2部分:重載(S系列)螺柱端頭.尺寸、設計、試驗方法和要求 |
Connections for fluid power and general use - Ports and stud ends with ISO 261 threads and O-ring sealing - Heavy-duty (S series) stud ends - Dimensions, design, test methods and requirements. |
| BS ISO 6149-3-1995 |
液壓傳動的連接和一般應用.油口和具有ISO261螺紋和O型環密封的螺柱端頭.第3部分:輕載(L系列)螺柱端頭.尺寸、設計、試驗方法和要求 |
Connections for fluid power and general use - Ports and stud ends with ISO 261 threads and O-ring sealing - Light-duty (L series) stud ends - Dimensions, design, test methods and requirements |
| BS ISO 6155-1998 |
機床.臥式軸六角自動車床和臥式單軸自動車床的試驗條件.精度試驗 |
Machine tools - Test conditions for horizontal spindle turret and single spindle automatic lathes - Testing of the accuracy |
| BS ISO 6162-1-2002 |
液壓傳動.帶對開夾或整體式法蘭夾的法蘭接頭以及公制或英制螺釘.在壓力為3,5MPa(35bar)至35MPa(350bar),DN13至DN127時使用的法蘭接頭 |
Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| BS ISO 6162-2-2002 |
液壓傳動.帶對開夾或整體式法蘭夾的法蘭接頭以及公制或英制螺釘.在壓力為35MPa(350bar)至40MPa(400bar),DN13至DN51時使用的法蘭接頭 |
Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51 |
| BS ISO 6166-2001 |
證券和有關金融手段.國際證券鑒別標志標準號系統(ISIN) |
Securities and related financial instruments - International securities identification numbering system (ISIN) |
| BS ISO 6179-1998 |
硫化或熱塑橡膠.橡膠薄板和橡膠涂層織物.揮發性液體傳播速度的測定(重力測重技術) |
Rubber, vulcanized or thermoplastic. Rubber sheets and rubber-coated fabrics. Determination of transmission rate of volatile liquids (gravimetric technique) |
| BS ISO 6194-4-1999 |
旋轉軸唇型密封件.性能試驗過程 |
Rotary shaft lip type seals - Performance test procedures |
| BS ISO 6195-2002 |
流體傳動系統和件.缸筒.活塞桿往復用防塵圈溝槽.尺寸和公差 |
Fluid power systems and components - Cylinder-rod wiper-ring housings in reciprocating applications - Dimensions and tolerances |
| BS ISO 6196-1-1994 |
顯微照相.詞匯.通用術語 |
Micrographics - Vocabulary - General terms |
| BS ISO 6196-10-2000 |
顯微照相.詞匯.索引 |
Micrographics - Vocabulary - Index |
| BS ISO 6196-2-1994 |
顯微照相.詞匯.圖像位置和記錄的方法 |
Micrographics - Vocabulary - Image positions and methods of recording |
| BS ISO 6196-3-1998 |
顯微照相.詞匯.沖片過程 |
Micrographics - Vocabulary - Film processing |
| BS ISO 6196-4-1999 |
縮微攝影.詞匯.第4部分:材料和包裝 |
Micrographics - Vocabulary - Materials and packaging |
| BS ISO 6196-5-1988 |
縮微攝影技術.詞匯.第5部分:影象質量.清晰度,檢驗 |
Micrographics - Vocabulary - Quality of images, legibility, inspection |
| BS ISO 6196-6-1992 |
顯微照相.詞匯.設備 |
Micrographics - Vocabulary - Equipment |
| BS ISO 6196-7-1992 |
縮微攝影技術.詞匯.第7部分:計算機縮微技術 |
Micrographics - Vocabulary - Computer micrographics |
| BS ISO 6198-1994 |
縮微照相.透明縮微膠片.性能特征 |
(Micrographics - Readers for transparent microforms - Performance characteristics) |
| BS ISO 6199-1991 |
縮微攝影.采用16mm和35mm明膠合銀型縮微膠片的文件縮微攝影.操作程序 |
Micrographics - Microfilming of documents on 16 mm and 35 mm silver-gelatin type microfilm - Operating procedures |
| BS ISO 6200-2000 |
縮微攝影.源文件的第1代明膠合銀縮微膠片.密度規范和測量方法 |
Micrographics - First generation silver-gelatin microforms of source documents - Density specifications and method of measurement |
| BS ISO 6237-2003 |
粘合劑.木材與木材粘結體.用拉伸負荷測定剪切強度 |
(Adhesives - Wood-to-wood adhesive bonds - Determination of shear strength by tensile loading) |
| BS ISO 6243-1997 |
建筑設計氣候數據.符號的提案系統 |
Climatic data for building design - Proposed system of symbols |
| BS ISO 6245-2001 |
石油產品.灰分的測定 |
Petroleum products - Determination of ash |
| BS ISO 6263-1997 |
液壓傳動.補償式流量控制閥.裝配面 |
Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces |
| BS ISO 6264-1998 |
液壓傳動.減壓閥.裝配面 |
Hydraulic fluid power - Pressure-relief valves - Mounting surfaces |
| BS ISO 6292-1997 |
機動工業貨車和牽引車.制動器性能和部件強度 |
Powered industrial trucks and tractors - Brake performance and component strength |
| BS ISO 6296-2003 |
石油及其產品的試驗方法.石油產品.水的測定.電位測量卡爾·費休滴定法 |
(Methods of test for petroleum and its products - Petroleum product - Determination of water - Potentiometric Karl Fischer titration method) |
| BS ISO 6301-1-1998 |
氣壓傳動.空氣壓縮潤滑器.供貨商文件應包括主要特性和產品標志要求 |
Pneumatic fluid power - Compressed air lubricators - Main characteristics to be included in supplier`s literature and product-marking requirements |
| BS ISO 6301-2-1998 |
氣壓傳動.空氣壓縮潤滑器.測定包括在供貨商文件中的主要特性的試驗方法 |
Pneumatic fluid power - Compressed air lubricators - Test methods to determine the main characteristics to be included in supplier`s literature |
| BS ISO 6328-2000 |
攝影.攝影材料.ISO分辨率的測定 |
Photography - Photographic materials - Determination of ISO resolving power |
| BS ISO 6336-1-1997 |
正齒輪和斜齒輪負載能力的計算.基本原理,說明和一般影響因素 |
Calculation of load capacity of spur and helical gears - Basic principles, introduction and general influence factors |
| BS ISO 6336-2-1996 |
正齒輪和斜齒輪承載能力的計算.第2部分:齒輪表面耐用能力的計算 |
Calculation of load capacity of spur and helical gears - Calculation of surface durability (pitting) |
| BS ISO 6336-3-1997 |
正齒輪和斜齒輪承載能力的計算.第3部分:輪齒彎曲強度 |
Calculation of load capacity of spur and helical gears - Calculation of tooth bending strength |
| BS ISO 6336-5-1997 |
正齒輪和斜齒輪承載能力的計算.第5部分:材料的強度和質量 |
Calculation of load capacity of spur and helical gears - Strength and quality of materials |
| BS ISO 6336-5-2003 |
直齒輪和斜齒輪承載能力的計算.材料的強度和質量 |
(Calculation of load capacity of spur and helical gears - Strength and quality of materials) |
| BS ISO 6344-1-1998 |
砂布.粒度分析.粒度分布試驗 |
Coated abrasives - Grain size analysis - Grain size distribution test |
| BS ISO 6344-2-1998 |
砂布.粒度分析.第2部分:P12-P220粗磨料的粒度分布測定 |
Coated abrasives - Grain size analysis - Determination of grain size distribution of macrogrits P12 to P220 |
| BS ISO 6344-3-1998 |
涂覆磨料.粒度分析.P240-P2500細微磨光粉粒度分布測定 |
Coated abrasives - Grain size analysis - Determination of grain size distribution of microgrits P240 to P2500 |
| BS ISO 6356-2000 |
鋪地織物.靜電性評定.行走試驗 |
Textile floor coverings - Assessment of static electrical propensity - Walking test |
| BS ISO 639-1-2002 |
語種名稱代碼.Alpha-2 代碼 |
Codes for the representation of the names of languages - Alpha-2 code |
| BS ISO 639-2-1999 |
語種名稱表示代碼.第2部分:α-3代碼 |
Codes for the representation of the names of languages - Alpha-3 code |
| BS ISO 6393-1999 |
聲學.土方機械發出的外部噪聲測量.靜態試驗條件 |
Acoustics - Measurement of exterior noise emitted by earth-moving machinery - Stationary test conditions |
| BS ISO 6394-1999 |
聲學.土方機械發出的噪聲在操作者位置的測量.靜態試驗條件 |
Acoustics - Measurement at the operator`s position of noise emitted by earth-moving machinery - Stationary test conditions |
| BS ISO 6426-2-2002 |
鐘表詞匯.技術和商用定義 |
Horological vocabulary - Technical and commercial definitions |
| BS ISO 6431-1995 |
氣壓傳動.有可拆式裝配架.32-320mm缸筒的1000KPa(10bar)系列單桿液壓缸.裝配尺寸 |
Pneumatic fluid power - Single rod cylinders, 1 000 kPa (10 bar) series, with detachable mountings, bores from 32 mm to 320 mm - Mounting dimensions |
| BS ISO 6432-1996 |
氣壓傳動.單桿氣缸.10巴(1100kPa)系列.8-25mm的氣缸筒.裝配尺寸 |
Pneumatic fluid power - Single rod cylinders - 10 bar (1 000 kPa) series - Bores from 8 to 25 mm - Mounting dimensions |
| BS ISO 6446-1996 |
橡膠制品.橋支承架.橡膠材料規范 |
Rubber products - Bridge bearings - Specification for rubber materials |
| BS ISO 6472-2004 |
橡膠配合劑.縮略語 |
|
| BS ISO 6488-2005 |
煙草和煙草制品.水含量的測定.卡爾費歇爾方法 |
|
| BS ISO 6488-2005 |
煙草和煙草制品.水含量的測定.卡爾費歇爾方法 |
|
| BS ISO 6489-1-2002 |
農用車輛.被牽引車和牽引車的機械連接.掛勾尺寸 |
Agricultural vehicles - Mechanical connections between towed and towing vehicles - Dimensions of hitch-hooks |
| BS ISO 6489-2-2002 |
農用車輛.被牽引和牽引車輛間的機械連接裝置.第2部分:40號 U型鉤的連接 |
Agricultural vehicles - Mechanical connections between towed and towing vehicles - Specifications for clevis coupling 40 |
| BS ISO 6489-3-2004 |
農用車輛.被牽引和牽引車之間的機械連接裝置.拖拉機牽引桿 |
|
| BS ISO 6497-2002 |
動物飼料.取樣 |
Animal feeding stuffs - Sampling |
| BS ISO 6518-1-2002 |
道路車輛.點火系統.詞匯 |
Road vehicles - Ignition systems - Vocabulary |
| BS ISO 6519-2004 |
柴油機.噴油泵.軸端和轂盤的錐度 |
|
| BS ISO 6531-1999 |
林業機械.便攜手提式鏈鋸.詞匯. |
Machinery for forestry - Portable hand-held chain-saws - Vocabulary |
| BS ISO 6533-2002 |
林業機械.便攜式鏈鋸前護手器.尺寸和間隙 |
Forestry machinery - Portable chain-saw front hand-guard - Dimensions and clearances |
| BS ISO 6549-2000 |
道路車輛.H和R點測定的程序 |
Road vehicles - Procedure for H- and R-point determination |
| BS ISO 6550-3-2002 |
道路車輛.帶錐座的封閉型電熱塞及其氣缸安裝孔尺寸.第3部分:M10DRKONG |
Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - M10 glow-plugs |
| BS ISO 6550-4-2005 |
道路車輛.帶錐座封閉型電熱塞及其汽缸蓋安裝孔尺寸.M8 x 1電熱塞 |
|
| BS ISO 6561-1-2005 |
水果、蔬菜及其制品.鎘含量測定.石墨爐原子吸收光譜測定法 |
|
| BS ISO 6561-2-2005 |
水果、蔬菜及其制品.鎘含量測定.火焰原子吸收光譜測定法 |
|
| BS ISO 6570-2002 |
天然氣.潛在烴液含量的測定.測重法 |
Natural gas - Determination of potential hydrocarbon liquid content - Gravimetric methods |
| BS ISO 6576-2004 |
月桂(Laurus nobilis Linnaeus)整葉和碎葉 |
|
| BS ISO 6576-2004 |
月桂.(Laurus nobilis Linnaeus)整葉和碎葉 |
|
| BS ISO 6588-1-2005 |
紙、紙板和紙漿.水提取物pH值的測定.冷萃取 |
|
| BS ISO 6605-2003 |
液壓傳動.軟管及軟管組件.試驗方法 |
(Hydraulic fluid power - Hoses and hose assemblies - Test methods) |
| BS ISO 6611-2004 |
乳和乳制品.酵母和(或)霉菌菌落形成單位的計數.25℃時的菌落計數技術 |
|
| BS ISO 6621-2-2004 |
內燃機.活塞環.檢驗測量規則 |
|
| BS ISO 6621-4-2003 |
內燃機.活塞環.一般規范 |
(Internal combustion engines - Piston rings - General specifications) |
| BS ISO 6623-2004 |
內燃機.活塞環.鑄鐵制刮環 |
|
| BS ISO 6644-2002 |
流動谷物和精加工谷物產品.機械方法自動取樣 |
Flowing cereals and milled cereal products - Automatic sampling by mechanical means |
| BS ISO 6646-2000 |
稻米.稻谷和有殼稻谷潛在碾磨產量的測定 |
Rice - Determination of the potential milling yield from paddy and husked rice |
| BS ISO 666-1997 |
機床.輪轂式法蘭平面磨輪的安裝 |
Machine tools - Mounting of plain grinding wheels by means of hub flanges |
| BS ISO 6670-2002 |
速溶咖啡.帶內襯的大容量箱的取樣方法 |
Instant coffee - Sampling method for bulk units with liners |
| BS ISO 6673-2003 |
生咖啡豆.在105℃時質量損失的測定 |
(Green coffee - Determination of loss in mass at 105 鳦) |
| BS ISO 668-1996 |
貨運集裝箱系列1.分類、外形尺寸和額定容量 |
Series 1 freight containers - Classification, dimensions and ratings |
| BS ISO 6686-1995 |
作物保護設備.防滴裝置.減小噴嘴液流量的測定 |
Equipment for crop protection - Anti-drip devices - Determination of performance |
| BS ISO 6690-1997 |
擠奶裝置的機械試驗 |
Milking machine installations - Mechanical tests |
| BS ISO 6710-1996 |
靜脈取血樣用一次性容器 |
Single-use containers for venous blood specimen collection |
| BS ISO 6721-10-2001 |
塑料.動力機械性能的測定.使用平行板式振蕩流變儀測定復合剪切粘度 |
(Plastics - Determination of dynamic mechanical properties - Complex shear viscosity using a parallel-plate oscillatory rheometer) |
| BS ISO 6741-1-2002 |
紡織品.纖維和紗.寄銷品商業質量的測定.質量的測定和計算 |
Textiles - Fibres and yarns - Determination of commercial mass of consignments - Mass determination and calculations |
| BS ISO 6741-2-2002 |
紡織品.纖維和紗.寄銷品商業質量的測定.獲取實驗室樣品的方法 |
Textiles - Fibres and yarns - Determination of commercial mass of consignments - Methods for obtaining laboratory samples |
| BS ISO 6741-3-2002 |
紡織品.纖維和紗.寄銷品商業質量的測定.樣品凈化規程 |
Textiles - Fibres and yarns - Determination of commercial mass of consignments - Specimen cleaning procedures |
| BS ISO 6743-1-2002 |
潤滑劑、工業用潤滑油和有關產品(L類).分類.A 族(總損耗系統) |
Lubricants, industrial oils and related products (class L) - Classification - Family A (Total loss systems) |
| BS ISO 6743-3-2004 |
潤滑劑、工業潤滑油和有關產品(L類).分類.D組(壓縮機) |
|
| BS ISO 6743-4-1999 |
潤滑劑、工業用潤滑油和有關產品(L類).分類.第4部分:H族(液壓系統) |
Lubricants, industrial oils and related products (class L) - Classification - Family H (hydraulic systems) |
| BS ISO 6743-9-2004 |
潤滑劑、工業潤滑油和有關產品(L類).分類.X族(潤滑脂) |
|
| BS ISO 6743-99-2002 |
潤滑劑、工業用潤滑油和有關產品(L類).分類.總則 |
Lubricants, industrial oils and related products (class L) - Classification - General |
| BS ISO 6746-1-2003 |
土方機械.尺寸和代碼的定義.主機 |
(Earth-moving machinery - Definitions of dimensions and codes - Base machine) |
| BS ISO 6746-2-2003 |
土方機械.尺寸和代碼的定義.設備和附件 |
(Earth-moving machinery - Definitions of dimensions and codes - Equipment and attachments) |
| BS ISO 6751-1998 |
制模工具.圓柱頭推桿 |
Tools for moulding - Ejector pins with cylindrical head |
| BS ISO 6753-2-1998 |
模壓工具.機加工金屬板.第2部分:模具的機加工金屬板 |
Tools for pressing and moulding - Machined plates - Machined plates for moulds |
| BS ISO 6768-1998 |
環境空氣.二氧化氮含量濃度的測定.改進的格里斯-薩爾茨曼(Griess-Saltzman) 法 |
Ambient air - Determination of mass concentration of nitrogen dioxide - Modified Griess-Saltzman method |
| BS ISO 6780-1995 |
貨物聯運用普通平托盤.一般用途的貨物聯運托盤主要尺寸及公差 |
(General-purpose flat pallets for through transit of goods - Principal dimensions and tolerances) |
| BS ISO 6787-2001 |
螺釘和螺母用裝配工具.可調扳手 |
(Assembly tools for screws and nuts - Adjustable wrenches) |
| BS ISO 6798-1996 |
往復式內燃機.空氣噪聲的測量.工程法和測量法 |
Reciprocating internal combustion engines - Measurement of emitted airborne noise - Engineering method and survey method |
| BS ISO 68-1-1999 |
ISO普通螺紋.基本外形.第1部分:米制螺紋 |
ISO general purpose screw threads - Basic profile - Metric screw threads |
| BS ISO 68-2-1999 |
ISO普通螺紋.基本外形.第1部分:英制螺紋 |
ISO general purpose screw threads - Basic profile - Inch screw threads |
| BS ISO 6805-1995 |
井下采礦用橡膠軟管和軟管組件.采煤用的鋼絲加筋液壓型.規范 |
Rubber hoses and hose assemblies for underground mining - Wire-reinforced hydraulic types for coal mining - Specification |
| BS ISO 6811-1998 |
球面滑動軸承.詞匯 |
Spherical plain bearings - Vocabulary |
| BS ISO 6813-1998 |
道路車輛.碰撞分類.術語 |
Road vehicles - Collision classification - Terminology |
| BS ISO 6846-1995 |
攝影技術.黑白連續色調相紙.印相用ISO感光度和寬容度的測定 |
Photography - Black and white continuous tone papers - Determination of ISO speed and ISO range for printing |
| BS ISO 6849-1997 |
攝影術.加工照片廢棄物.硼的測定 |
Photography - Processing wastes - Determination of boron |
| BS ISO 6851-2002 |
攝影.沖洗廢液.氨態氮總含量的測定(微擴散基氏定氮法) |
Photography - Processing waste - Determination of total amino nitrogen (microdiffusion Kjeldahl method) |
| BS ISO 6853-2002 |
攝影.沖洗廢液.氨態氮含量的測定(微擴散法) |
Photography - Processing waste - Determination of ammoniacal nitrogen (microdiffusion method) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com