標準號 |
中文名稱 |
英文名稱 |
| BS EN 60269-2-1988 |
低壓熔斷器.專職人員使用的熔斷器的補充要求 |
(Low-voltage fuses - Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)) |
| BS EN 60269-3-1995 |
低壓熔斷器.非專業人員用熔斷器的補充要求(主要是家用和類似用途用熔斷器) |
(Low-voltage fuses - Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications)) |
| BS EN 60269-4-1-2002 |
低壓熔斷器.第4-1部分:半導體器件用熔斷體的補充要求.第1-3節:標準化的熔斷體類型實例 |
(Low-voltage fuses - Supplementary requirements for fuse-links for the protection of semiconductor devices - Sections I to III: Examples of types of standardized fuse-links) |
| BS EN 60269-4-1988 |
低壓熔斷器.半導體器件防護用熔斷體的補充要求 |
(Low-voltage fuses - Supplementary requirements for fuse-links for the protection of semiconductor devices) |
| BS EN 60270-2001 |
高電壓試驗技術.部分放電測量 |
(High-voltage test techniques - Partial discharge measurements) |
| BS EN 60276-1988 |
碳刷、刷握、換向器和滑環的定義和名稱 |
(Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-rings) |
| BS EN 60282-1-2002 |
高壓熔斷器.限流熔斷器 |
(High-voltage fuses - Current-limiting fuses) |
| BS EN 60286-1-1998 |
自動裝卸件的包裝.具有軸向連續帶的件帶狀包裝 |
(Packaging of components for automatic handling - Tape packaging of components with axial leads on continuous tapes) |
| BS EN 60286-2-1998 |
自動裝卸件的包裝.具有非直接連續帶的件帶狀包裝 |
(Packaging of components for automatic handling - Tape packaging of components with unidirectional leads on continuous tapes) |
| BS EN 60286-3-1998 |
自動裝卸件的包裝.連續帶無定向件帶狀包裝 |
(Packaging of components for automatic handling - Packaging of leadless components on continuous tapes) |
| BS EN 60286-4-1998 |
自動控制用件的封裝.E和G型包裝件中密封電子件用粘附裝料裝置 |
Packaging of components for automatic handling - Stick magazines for electronic components encapsulated in packages of form E and G |
| BS EN 60286-5-1997 |
件自動封裝.第5部分:矩陣盤 |
Packaging of components for automatic handling - Matrix trays |
| BS EN 60286-5-2004 |
自動裝卸件的包裝.矩陣盤 |
|
| BS EN 60286-6-1999 |
自動裝卸件的包裝.表面固定件的大規模包裝 |
(Packaging of components for automatic handling - Bulk case packaging for surface mounting components) |
| BS EN 60286-6-2004 |
自動裝配用件的包裝.表面安裝件的散裝盒包裝 |
|
| BS EN 60286-6-2004 |
自動裝配用件的包裝.表面安裝件的散裝盒包裝 |
|
| BS EN 60289-1994 |
電抗器 |
Reactors |
| BS EN 60296-2004 |
電工用液體.互感器和開關裝置用未使用礦物絕緣油 |
|
| BS EN 60297-4-1995 |
電氣設備機械結構.482.6mm(19.in)系列機械結構件的尺寸.第4部分:分機架及相關插件.附加尺寸 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Subracks and associated plug-in units - Additional dimensions |
| BS EN 60297-5-100-2001 |
電子設備的機械結構.482.6mm(19in)系列的機械結構的尺寸.支架和相關插件.設計總覽 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Subracks and associated plug-in units - Design overview |
| BS EN 60297-5-101-2001 |
電子設備的機械結構.482,6mm(19in)系列的機械結構的尺寸.支架和相關插件.注入和抽提器柄 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Subracks and associated plug-in units - Injector/extractor handle |
| BS EN 60297-5-102-2001 |
電子設備的機械結構.482,6mm(19in)系列的機械結構的尺寸.與插入件有關的電磁屏蔽條款 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Subracks and associated plug-in units - Electromagnetic shielding provision |
| BS EN 60297-5-103-2001 |
電子設備的機械結構.482,6mm(19in)系列的機械結構的尺寸.支架和相關插件.靜電放電保護 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Subracks and associated plug-in units - Electrostatic discharge protection |
| BS EN 60297-5-104-2001 |
電子設備的機械結構.482,6mm(19in)系列的機械結構的尺寸.支架和相關插件.鍵控 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Subracks and associated plug-in units - Keying |
| BS EN 60297-5-105-2001 |
電子設備的機械結構.482,6mm(19in)系列的機械結構的尺寸.支架和相關插件.定位銷和/或接地銷 |
(Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Subracks and associated plug-in units - Alignments and/or earth pin) |
| BS EN 60297-5-107-2001 |
電子設備的機械結構.482,6mm(19in)系列的機械結構的尺寸.支架和相關插件.后背固定的插件 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Subracks and associated plug-in units - Rear mounted plug-in units |
| BS EN 60298-1996 |
額定電壓1KV以上至72.5KV(含)交流金屬封閉開關和控制設備 |
A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
| BS EN 60299-1994 |
家用電熱毯.性能測量方法 |
Household electric blankets - Methods for measuring performance |
| BS EN 603-1-1997 |
鋁及鋁合金.鍛坯.檢驗和交貨的技術條件 |
(Aluminium and aluminium alloys - Wrought forging stock - Technical conditions for inspection and delivery) |
| BS EN 603-2-1997 |
鋁及鋁合金.鍛坯.機械性能 |
(Aluminium and aluminium alloys - Wrought forging stock - Mechanical properties) |
| BS EN 603-3-2000 |
鋁及鋁合金.鍛坯.尺寸和形狀公差 |
(Aluminium and aluminium alloys - Wrought forging stock - Tolerances on dimensions and form) |
| BS EN 60300-1-2003 |
可靠性管理.可靠性管理系統 |
(Dependability management - Dependability management systems) |
| BS EN 60300-2-2004 |
可靠性管理.可靠性管理指南 |
|
| BS EN 60300-3-12-2004 |
可靠性管理.應用指南.集成邏輯支持 |
|
| BS EN 60300-3-14-2004 |
可靠性管理.應用指南.維護和維護支持 |
|
| BS EN 60300-3-14-2004 |
可靠性管理.應用指南.維護和維護支持 |
|
| BS EN 60300-3-2-2005 |
可靠性管理.應用指南.現場收集可靠性數據 |
|
| BS EN 60300-3-3-2004 |
可信性管理.應用指南.壽命周期成本 |
|
| BS EN 60305-1996 |
標稱電壓1000V以上架空線用絕緣子.交流設備用陶瓷或玻璃絕緣子.盤形和針形懸式絕緣子串件的特性 |
Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic or glass insulator units for a.c. systems - Characteristics of insulator units of the cap and pin type |
| BS EN 60309-1-1999 |
工業用插頭、插座輸出口和耦合器.一般要求 |
Plugs, socket-outlets and couplers for industrial purposes - General requirements |
| BS EN 60309-2-1999 |
工業用途的插頭、插座輸出口和耦合器.管腳和接觸導管附件尺寸的互換性要求 |
(Plugs, socket-outlets and couplers for industrial purposes - Dimensional interchangeability requirements for pin and contact-tube accessories) |
| BS EN 60310-1997 |
鐵路設施.鐵道車輛上的牽引變壓器和電感器 |
(Railway applications - Traction transformers and inductors on rolling stock) |
| BS EN 60310-2004 |
鐵路設施.鐵道車輛上的牽引變壓器和電感器 |
|
| BS EN 60311-2003 |
家用和類似用途的電熨斗.性能測量的方法 |
(Electric irons for household or similar use - Methods for measuring performance) |
| BS EN 60312-1998 |
家用真空吸塵器.性能測量的方法 |
(Vacuum cleaners for household use - Methods for measuring the performance) |
| BS EN 60315-4-1998 |
各種發射級別的無線電接受機的測量方法.調頻聲音廣播發射接受機 |
(Methods of measurement on radio receivers for various classes of emission - Receivers for frequency-modulated sound broadcasting emissions) |
| BS EN 60315-7-1996 |
各種發射類別的無線電接收機的測量方法.第7部分:數字衛星接收機的測量方法 |
(Methods of measurement on radio receivers for various classes of emission - Methods of measurement on digital satellite radio (DSR) receivers) |
| BS EN 60315-9-1997 |
各種發射類別的無線電接收機的測量方法.無線電數據系統接收特性測試 |
(Methods of measurement on radio receivers for various classes of emission - Measurement of the characteristics relevant to radio data system (RDS) reception) |
| BS EN 60317-0-1-1998 |
特種繞組線規范.一般要求.漆包圓銅線 |
(Specification for particular types of winding wires - General requirements - Enamelled round copper wire) |
| BS EN 60317-0-2-1998 |
特種繞組線規范.第0部分:一般要求.第1節:漆包圓銅線 |
(Specification for particular types of winding wires - General requirements - Enamelled rectangular copper wire) |
| BS EN 60317-0-3-1998 |
特種繞組線規范.一般要求.漆包圓鋁線 |
(Specification for particular types of winding wires - General requirements - Enamelled round aluminium wire) |
| BS EN 60317-0-4-1998 |
特種繞組線規范.第0部分:一般要求.第1節:漆包圓銅線 |
(Specification for particular types of winding wires - General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire) |
| BS EN 60317-0-5-1993 |
特種繞組線規范.一般要求.玻璃纖維編織的裸線或漆包扁銅線 |
(Specification for particular types of winding wires - General requirements - Glass-fibre braided, bare or enamelled rectangular copper wire) |
| BS EN 60317-0-6-2001 |
特種繞組線規范.一般要求.玻璃纖維纏繞樹脂或涂漆的裸露和漆包圓銅線 |
(Specification for particular types of winding wires - General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire) |
| BS EN 60317-1-1993 |
特種繞組線規范.105級聚乙烯醇縮乙醛漆包圓銅線 |
(Specifications for particular types of winding wires - Polyvinyl acetal enamelled round copper wire, class 105) |
| BS EN 60317-11-2000 |
特種繞組線規范.130級絲包的成束熔接聚氨酯漆包圓銅線 |
(Specifications for particular types of winding wires - Bunched solderable polyurethane enamelled round copper wires, class 130, with silk covering) |
| BS EN 60317-12-1993 |
特種繞組線規范.120級聚乙烯醇縮乙醛漆包圓銅線 |
(Specifications for particular types of winding wires - Polyvinyl acetal enamelled round copper wire, class 120) |
| BS EN 60317-13-1993 |
特種繞組線規范.200級涂覆聚酰胺-酰亞胺的聚酯或聚酰胺酯漆包圓銅線 |
(Specifications for particular types of winding wires - Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200) |
| BS EN 60317-14-1993 |
特種繞組線規范.105級聚乙烯醇縮乙醛漆包圓鋁線 |
Specifications for particular types of winding wires - Polyvinyl acetal enamelled round aluminium wire, class 105 |
| BS EN 60317-15-1993 |
特種繞組線規范.180級聚酰胺酯漆包圓鋁線 |
(Specifications for particular types of winding wires - Polyesterimide enamelled round aluminium wire, class 180) |
| BS EN 60317-15-2004 |
特種繞組線規范.聚酯酰亞胺漆包圓鋁線(180級) |
|
| BS EN 60317-16-1993 |
特種繞組線規范.155級聚酯漆包矩形銅線 |
(Specifications for particular types of winding wires - Polyester enamelled rectangular copper wire, class 155) |
| BS EN 60317-17-1993 |
特種繞組線規范.105級聚乙烯醇縮乙醛漆包矩形銅線 |
(Specifications for particular types of winding wires - Polyvinyl acetal enamelled rectangular copper wire, class 105) |
| BS EN 60317-18-1993 |
特種繞組線規范.120級聚乙烯醇縮乙醛漆包矩形銅線 |
(Specifications for particular types of winding wires - Polyvinyl acetal enamelled rectangular copper wire, class 120) |
| BS EN 60317-19-1996 |
特種繞組線規范.涂覆聚酰胺的可焊接聚氨基甲酸乙酯漆包圓銅線.130級 |
(Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 130) |
| BS EN 60317-1996 |
特殊型繞組線規范.聚酰亞胺涂層的軟釬焊聚酰胺酯漆包圓銅線.130類 |
(Specifications for particular types of winding wires. Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 130) |
| BS EN 60317-2-1993 |
特種繞組線規范.130級帶粘合層的可焊接聚氨酯漆包圓銅線 |
(Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer) |
| BS EN 60317-20-1993 |
特種繞組線規范.155級可焊接聚氨酯漆包圓銅線 |
(Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire, class 155) |
| BS EN 60317-21-1996 |
特殊型繞組線規范.聚酰亞胺涂層的軟釬焊聚酰胺酯漆包圓銅線.155類 |
(Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155) |
| BS EN 60317-22-1993 |
特種繞組線規范.180級涂覆聚酰胺的聚酯或聚酰胺酯漆包圓銅線 |
(Specifications for particular types of winding wires - Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180) |
| BS EN 60317-23-1993 |
特種繞組線規范.180級可焊接聚酰胺酯漆包圓銅線 |
(Specifications for particular types of winding wires - Solderable polyesterimide enamelled round copper wire, class 180) |
| BS EN 60317-24-1996 |
特殊型繞組線規范.聚酰亞胺涂層的聚酯或聚酯酰胺聚酰亞胺漆包圓鋁線,180類 |
(Specifications for particular types of winding wires - Polyester or polyesterimide enamelled round aluminium wire overcoated with polyamide, class 180) |
| BS EN 60317-25-1993 |
特種繞組線規范.200級涂覆聚酰胺-酰亞胺的聚酯或聚酰胺酯漆包圓鋁線 |
(Specifications for particular types of winding wires - Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200) |
| BS EN 60317-26-1993 |
特種繞組線規范.200級聚酰胺-亞酰胺酯漆包圓銅線 |
(Specifications for particular types of winding wires - Polyamide-imide enamelled round copper wire, class 200) |
| BS EN 60317-27-1998 |
特種繞組線規范.紙帶覆蓋扁銅繞組線 |
(Specifications for particular types of winding wires - Paper tape covered rectangular copper wire) |
| BS EN 60317-28-1991 |
特種繞組線規范.180級聚酰胺酯漆包矩形銅線 |
(Specifications for particular types of winding wires - Polyesterimide enamelled rectangular copper wire, class 180) |
| BS EN 60317-29-1991 |
特種繞組線規范.200級涂覆聚酰胺-酰亞胺的聚酯或聚酰胺酯漆包矩形銅線 |
(Specifications for particular types of winding wires - Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200) |
| BS EN 60317-3-1996 |
特種繞組線規范.第1部分:聚乙烯醇乙醛漆包圓銅繞組線,155級 |
(Specifications for particular types of winding wires - Polyester enamelled round copper wire, class 155) |
| BS EN 60317-30-1993 |
特種繞組線規范.220級聚酰亞胺漆包矩形銅線 |
(Specifications for particular types of winding wires - Polyimide enamelled rectangular copper wire, class 220) |
| BS EN 60317-31-1993 |
特種繞組線規范.溫度指數為180的玻璃纖維繞制聚酯或聚酰胺酯經清漆處理過的裸線或漆包矩形銅線 |
(Specifications for particular types of winding wires - Glass-fibre wound, polyester or polyesterimide varnish-treated, bare or enamelled rectangular copper wire, temperature index 180) |
| BS EN 60317-32-1993 |
特種繞組線規范.溫度指數為155的玻璃纖維繞制聚酯或聚酰胺酯經清漆處理過的裸線或漆包矩形銅線 |
(Specifications for particular types of winding wires - Glass-fibre wound, polyester or polyesterimide varnish-treated, bare or enamelled rectangular copper wire, temperature index 155) |
| BS EN 60317-33-1993 |
特種繞組線規范.溫度指數為200的玻璃纖維繞制的經硅氧烷漆處理的裸線或漆包矩形銅線 |
(Specifications for particular types of winding wires - Glass-fibre wound, silicone varnish-treated, bare or enamelled rectangular copper wire, temperature index 200) |
| BS EN 60317-34-1997 |
特種繞組線規范.第34部分:聚酯漆包圓銅線.130L級 |
(Specifications for particular types of winding wires - Polyester enamelled round copper wire, class 130 L) |
| BS EN 60317-35-1993 |
特種繞組線規范.155級帶粘結層的可焊接聚氨酯漆包圓銅線 |
(Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer) |
| BS EN 60317-36-1993 |
特種繞組線規范.180級帶粘結層的可焊接聚酰胺酯漆包圓銅線 |
(Specifications for particular types of winding wires - Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer) |
| BS EN 60317-37-1993 |
特種繞組線規范.180級帶粘結層的聚酰胺酯漆包圓銅線 |
(Specifications for particular types of winding wires - Polyesterimide enamelled round copper wire, class 180 with a bonding layer) |
| BS EN 60317-38-1993 |
特種繞組線規范.200級帶粘結層的涂覆聚酰胺-酰亞胺的聚酯或聚酰胺酯漆包圓銅線 |
(Specifications for particular types of winding wires - Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200, with a bonding layer) |
| BS EN 60317-39-1993 |
特殊型繞組線規范.玻璃纖維編織聚酯或聚酰亞胺處理,裸或漆包方銅線,溫度系數180 |
(Specifications for particular types of winding wires - Glass-fibre braided, polyester or polyesterimide varnish-treated, bare or enamelled rectangular copper wire, temperature index 180) |
| BS EN 60317-4-1993 |
特種繞組線規范.130級可焊接聚氨酯漆包圓銅線 |
(Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire, class 130) |
| BS EN 60317-40-1993 |
特殊型繞組線規范.玻璃纖維編織硅清漆處理,裸或漆包方銅線,溫度系數200 |
(Specifications for particular types of winding wires - Glass-fibre braided silicone varnish-treated, bare or enamelled rectangular copper wire, temperature index 200) |
| BS EN 60317-42-1997 |
特種繞組線規范.第42部分:聚亞酰胺酯漆包圓銅線.200級 |
(Specifications for particular types of winding wires - Polyester-amide-imide enamelled round copper wire, class 200) |
| BS EN 60317-43-1997 |
特種繞組線規范.第43部分:芳香聚酰亞胺絕緣膠帶包圓銅線.240級 |
(Specifications for particular types of winding wires - Aromatic polyimide tape wrapped round copper wire, class 240) |
| BS EN 60317-44-1997 |
特種繞組線規范.第44部分:芳族聚酰亞胺包裝矩形銅線.240級 |
(Specifications for particular types of winding wires - Aromatic polyimide tape wrapped rectangular copper wire, class 240) |
| BS EN 60317-45-1998 |
特種繞組線規范.聚酯漆包圓銅線.級別130 |
(Specifications for particular types of winding wires - Polyester enamelled round copper wire, class 130) |
| BS EN 60317-46-1997 |
特種繞組線規范.芳族聚酰胺漆包圓銅線.240級 |
(Specifications for particular types of winding wires - Aromatic polyimide enamelled round copper wires, class 240) |
| BS EN 60317-47-1997 |
特種繞組線規范.第47部分:芳族聚酰胺漆包矩形銅線.240級 |
(Specifications for particular types of winding wires - Aromatic polyimide enamelled rectangular copper wire, class 240) |
| BS EN 60317-48-2000 |
特殊型繞組線規范.玻璃纖維環繞樹脂或清漆浸漬、裸或漆包圓銅線及溫度指數為155 |
(Specifications for particular types of winding wires - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155) |
| BS EN 60317-49-2000 |
特殊型繞組線規范.玻璃纖維環繞樹脂或清漆浸漬、裸或漆包圓銅線及溫度指數為180 |
(Specifications for particular types of winding wires - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180) |
| BS EN 60317-50-2000 |
特殊型繞組線規范.玻璃纖維環繞樹脂或清漆浸漬、裸或漆包圓銅線及溫度指數為200 |
(Specifications for particular types of winding wires - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200) |
| BS EN 60317-51-2001 |
繞組線特殊類型規范.可焊接的聚氨酯漆包圓銅線.180級 |
(Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire, class 180) |
| BS EN 60317-52-1999 |
特種繞組線規范.聚芳香酰胺帶包被的圓銅線.溫度指數220 |
(Specifications for particular types of winding wires - Aromatic polyamide (aramid) tape wrapped round copper wire, temperature index 220) |
| BS EN 60317-53-1999 |
特種繞組線規范.芳香聚酰胺帶包被的矩型銅線.溫度指數220 |
(Specifications for particular types of winding wires - Aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220) |
| BS EN 60317-7-1993 |
特種繞組線規范.220級聚酰亞胺漆包圓銅線 |
(Specifications for particular types of winding wires - Polyimide enamelled round copper wire, class 220) |
| BS EN 60317-8-1993 |
特種繞組線規范.180級聚酰胺酯漆包圓銅線 |
(Specifications for particular types of winding wires - Polyesterimide enamelled round copper wire, class 180) |
| BS EN 60318-1-1998 |
電聲學.人頭和耳模擬器.超級聽力耳機校正用耳模擬器 |
(Electroacoustics - Simulators of human head and ear - Ear simulator for the calibration of supra-aural earphones) |
| BS EN 60318-2-1998 |
電聲學.人頭和耳模擬器.在超高頻范圍內測聲耳機校正用間歇聽力耦合器 |
(Electroacoustics - Simulators of human head and ear - An interim acoustic coupler for the calibration of audiometric earphones in the extended high-frequency range) |
| BS EN 60318-3-1998 |
電聲學.人頭和耳模擬器.用于測聽計的超級聽力耳機校正用聽力耦合器 |
(Electroacoustics - Simulators of human head and ear - Acoustic coupler for the calibration of supra-aural earphones used in audiometry) |
| BS EN 60320-1-2001 |
家用和類似用途設備耦合器.一般要求 |
(Appliance couplers for household and similar general purposes - General requirements) |
| BS EN 60320-2-1-2001 |
家用和類似用途設備耦合器.耦合器單個類型要求規范.縫紉機耦合器 |
(Appliance couplers for household and similar general purposes - Specification of requirements for individual types of coupler - Sewing machine couplers) |
| BS EN 60320-2-2-1999 |
家用和類似用途設備耦合器.各型耦合器要求規范.家用和類似用途設備用互連耦合器 |
(Appliance couplers for household and similar general purposes - Specification of requirements for individual types of coupler - Interconnection couplers for household and similar equipment) |
| BS EN 60320-2-3-1999 |
家用和類似用途設備耦合器.各型耦合器要求規范.防護級超過IPXO的設備耦合器 |
(Appliance couplers for household and similar general purposes - Specification of requirements for individual types of coupler - Appliance coupler with a degree of protection higher than IPX0) |
| BS EN 60322-2001 |
鐵路應用.滾動車輛的電氣設備.開放結構的電阻規則 |
(Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction) |
| BS EN 60325-2004 |
輻射防護儀.α、β和α/β(β 能量大于60 keV)污染測量?jī)x和監測儀 |
|
| BS EN 60332-1-2-2004 |
著火條件下電纜和光纜的試驗.單股絕緣電線或電纜的垂直火焰蔓延的試驗.1kW預混火焰法 |
|
| BS EN 60332-1-3-2004 |
著火條件下電纜和光纜的試驗.單股絕緣電線或電纜的垂直火焰蔓延的試驗.燃燒的微滴/顆粒的測定法 |
|
| BS EN 60332-1-3-2004 |
著火條件下電纜和光纜的試驗.單股絕緣電線或電纜的垂直火焰蔓延的試驗.燃燒的微滴/顆粒的測定程序 |
|
| BS EN 60332-2-2-2004 |
著火條件下電纜和光纜的試驗.單股絕緣電線或電纜的垂直火焰蔓延的試驗.擴散火焰法 |
|
| BS EN 60335-1-2002 |
家用和類似用途電器的安全規范.一般要求 |
(Specification for safety of household and similar electrical appliances - General requirements) |
| BS EN 60335-2-10-2003 |
家用和類似用途電器的安全規范.地板處理機和濕式擦洗機的特殊要求 |
(Specification for safety of household and similar electrical appliances - Particular requirements for floor treatment machines and wet scrubbing machines) |
| BS EN 60335-2-101-2003 |
家用和類似用途電器的安全規范.蒸發器的特殊要求 |
(Specification for safety of household and similar electrical appliances - Particular requirements - Particular requirements for vaporizers) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com