標準號 |
中文名稱 |
英文名稱 |
| BS ISO 1268-11-2005 |
纖維增強塑料.試驗板的生產方法.BMC和其他長纖維化合物的注射模塑法.小型試驗板 |
|
| BS ISO 1268-2-2001 |
纖維增強塑料.試驗板的生產方法.接觸模壓法和噴射成形法 |
Fibre-reinforced plastics - Methods of producing test plates - Contact and spray-up moulding |
| BS ISO 1268-3-2001 |
纖維增強塑料.試驗板的生產方法.濕壓縮模塑法 |
Fibre-reinforced plastics - Methods of producing test plates - Wet compression moulding |
| BS ISO 1268-5-2001 |
纖維增強塑料.試驗板的生產方法.長纖維纏繞 |
Fibre-reinforced plastics - Methods of producing test plates - Filament winding |
| BS ISO 1268-7-2001 |
纖維增強塑料.試驗板的生產方法.樹脂轉換模塑法 |
Fibre-reinforced plastics - Methods of producing test plates - Resin transfer moulding |
| BS ISO 1268-8-2004 |
纖維增強塑料.試驗板的生產方法.SMC和BMC壓模 |
|
| BS ISO 1268-9-2003 |
纖維增強塑料.試驗板的生產方法.GMT/STC的模制 |
(Fibre-reinforced plastics - Methods of producing test plates - Moulding of GMT/STC) |
| BS ISO 12686-2000 |
金屬和其他無機覆層.鎳、自催化鎳或鉻鍍敷或精整加工前用金屬物質的自動控制噴丸處理 |
Metallic and other inorganic coatings - Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish |
| BS ISO 1271-2001 |
香精油.羰基值的測定.自由羥氨法 |
Essential oils - Determination of carbonyl value - Free hydroxylamine method |
| BS ISO 1272-2001 |
香精油.酚類含量的測定 |
Essential oils - Determination of content of phenols |
| BS ISO 1275-1995 |
傳動和輸送機用雙節距的精密輥鏈和鏈輪 |
Double-pitch precision roller chains and sprockets for transmission and conveyors |
| BS ISO 12771-1997 |
塑料實驗室器皿.可處置血清移液管 |
Plastics laboratory ware - Disposable serological pipettes |
| BS ISO 12772-1997 |
實驗室玻璃器皿.可處置微血球容積計毛細管 |
Laboratory glassware - Disposable microhaematocrit capillary tubes |
| BS ISO 12775-1998 |
額定散裝玻璃產品的復合材料及其試驗方法導則 |
Guidelines on types of glass of normal bulk-production composition and their test methods |
| BS ISO 12789-2001 |
標準中子射線.模擬工作地點中子場產生的特性和方法 |
Reference neutron radiations - Characteristics and methods of production of simulated workplace neutron fields |
| BS ISO 1279-2001 |
香精油.羰基值的測定.氯化羥銨電勢計法 |
Essential oils - Determination of carbonyl value - Potentiometric methods using hydroxylammonium chloride |
| BS ISO 12794-2000 |
核能.輻射防護.四肢和眼用單獨熱致發光劑量計 |
Nuclear energy - Radiation protection - Individual thermoluminescence dosemeters for extremities and eyes |
| BS ISO 128-20-2000 |
技術圖紙.表示的一般原則.直線的基本規定 |
Technical drawings - General principles of presentation - Basic conventions for lines |
| BS ISO 128-21-2000 |
技術圖紙.表示的一般原則.用計算機輔助設計(CAD)系統對直線的準備 |
Technical drawings - General principles of presentation - Preparation of lines by CAD systems |
| BS ISO 128-22-2000 |
技術圖紙.表示的一般原則.畫標題線和參考線的一般習慣和應用 |
Technical drawings - General principles of presentation - Basic conventions and applications for leader lines and reference lines |
| BS ISO 128-23-1999 |
技術制圖.繪制的一般原理.結構繪圖線 |
Technical drawings - General principles of presentation - Lines on construction drawings |
| BS ISO 128-24-2000 |
技術圖紙.表示的一般原則.機械工程制圖線 |
Technical drawings - General principles of presentation - Lines on mechanical engineering drawings |
| BS ISO 128-25-2000 |
技術圖紙.表示的一般原則.造船繪圖線 |
Technical drawings - General principles of presentation - Lines on shipbuilding drawings |
| BS ISO 128-30-2001 |
技術制圖.表示的一般原則.基本慣例 |
Technical drawings - General principles of presentation - Basic conventions for views |
| BS ISO 128-34-2001 |
技術制圖.表示的一般原則.機械工程圖的視圖 |
Technical drawings - General principles of presentation - Views on mechanical engineering drawings |
| BS ISO 128-40-2001 |
技術制圖.表示的一般原則.切面和截面的一般換算 |
Technical drawings - General principles of presentation - Basic conventions for cuts and sections |
| BS ISO 128-44-2001 |
技術制圖.表示的一般原則.機械工程制圖部分 |
Technical drawings - General principles of presentation - Sections on mechanical engineering drawings |
| BS ISO 128-50-2001 |
技術制圖.表示的一般原則.切圖和截面圖的表示區域的一般原理 |
Technical drawings - General principles of presentation - Basic conventions for representing areas on cuts and sections |
| BS ISO 129-1-2004 |
技術制圖.尺寸和公差的表示.一般準則 |
|
| BS ISO 129-1-2004 |
技術制圖.尺寸和公差的表示.一般準則 |
|
| BS ISO 129-2000 |
技術圖紙.尺寸.一般原則、定義、標注方法和特殊畫法 |
Technical drawings - Dimensioning - General principles, definitions, methods of execution and special indications |
| BS ISO 12917-1-2002 |
石油和液化石油產品.水平圓桶罐檢測.手動法 |
Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Manual methods |
| BS ISO 12917-2-2002 |
石油和液化石油產品.水平圓桶罐檢測.內光電距離測量法 |
Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Internal electro-optical distance-ranging method |
| BS ISO 12922-1999 |
潤滑油,工業油和相干產品(L級).H族(液壓系統).HFAE,HFAS,HFB,HFC,HFDR和HFDU類別規范 |
Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU |
| BS ISO 12925-1-1998 |
潤滑劑,工業用油及有關(L類)產品.(齒輪)C種.第1部分:密封齒輪系統用潤滑劑規范 |
Lubricants, industrial oils and related products (class L) - Family C (Gears) - Specifications for lubricants for enclosed gear systems |
| BS ISO 12965-2000 |
丁二烯橡膠.用紅外線光譜法測定微觀結構 |
Butadiene rubber - Determination of microstructure by infra-red spectrometry |
| BS ISO 12986-2-2005 |
鋁生產用碳素材料.預焙陽極和陰極碳塊.用四點法測定抗彎強度 |
|
| BS ISO 12986-2-2005 |
鋁生產用碳素材料.預焙陽極和陰極碳塊.用四點法測定抗彎強度 |
|
| BS ISO 12988-2-2004 |
鋁生產用含碳材料.焙燒陽極.對二氧化碳反應性的測定.熱解重量分析法 |
|
| BS ISO 12989-2-2005 |
鋁生產用碳素材料.焙燒陽極和側壁塊.空氣反應性的測定.熱重分析法 |
|
| BS ISO 12992-1996 |
塑料制品.塑料薄膜和薄板垂直燃燒蔓延程序的測定 |
Plastics - Vertical flame spread determination for film and sheet |
| BS ISO 13003-2004 |
纖維增強塑料.循環載荷條件下疲勞性能的測定 |
|
| BS ISO 13012-1998 |
套筒型循環滾珠直線運動滾珠軸承.組件 |
Rolling bearings, linear motion, recirculating ball, sleeve type - Accessories |
| BS ISO 13041-1-2004 |
數控立式車床和旋轉中心的試驗條件.帶水平工件夾緊主軸的機床的幾何試驗 |
|
| BS ISO 13041-4-2004 |
數控立式車床和旋轉中心的試驗條件.平直和旋轉軸定位的精確性和反復性 |
|
| BS ISO 13041-6-2005 |
數控立式車床和轉向中心的試驗條件.試樣成品的精確度 |
|
| BS ISO 13041-7-2004 |
數控立式車床和轉向中心的試驗條件.坐標平面上等高線特性評價 |
|
| BS ISO 13041-8-2004 |
數控立式車床和旋轉中心的試驗條件.熱畸變的評價 |
|
| BS ISO 13050-2000 |
曲線齒狀同步皮帶驅動系統 |
Curvilinear toothed synchronous belt drive systems |
| BS ISO 132-1999 |
硫化或熱塑性橡膠.彎曲斷裂和斷裂增長的測定(德.馬蒂亞(DE MATTIA)法) |
Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia) |
| BS ISO 13202-2003 |
起重機.速度和時間參數的測量 |
(Cranes - Measurement of velocity and time parameters) |
| BS ISO 13215-2-1999 |
道路車輛.兒童限制器系統錯用危險的減少.正確裝配的要求和試驗過程(面板法) |
Road vehicles - Reduction of misuse risk of child restraint systems - Requirements and test procedures for correct installation (panel method) |
| BS ISO 13215-3-1999 |
道路車輛.兒童固定系統錯使用危險性的降低.用錯使用模式和效果分析(MMEA)對錯使用的預測和評估 |
Road vehicles - Reduction of misuse risk of child restraint systems - Prediction and assessment of misuse by misuse mode and effect analysis (MMEA) |
| BS ISO 13216-1-2000 |
道路車輛.兒童限制器系統用車輛錨具和錨具附件.座位彎曲錨具及附件 |
Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Seat bight anchorages and attachments |
| BS ISO 13216-2-2005 |
道路車輛.兒童約束系統在車內的固定點及主固定點的安裝.頂部系留的固定點及其連接 |
|
| BS ISO 13218-1998 |
道路車輛.兒童保護系統.有兒童乘客的事故報告格式 |
Road vehicles - Child restraint systems - Report form for accidents involving child passengers |
| BS ISO 13226-2000 |
橡膠.液體對硫化橡膠影響的表征用標準參考彈性體(SREs) |
Rubber - Standard reference elastomers (SRE`s) for characterizing the effect of liquids on vulcanized rubbers |
| BS ISO 13284-2003 |
叉車.叉形臂擴展部分和能自由伸縮的叉形臂.技術特性和強度要求 |
(Fork-lift trucks - Fork-arm extensions and telescopic fork arms - Technical characteristics and strength requirements) |
| BS ISO 13296-1998 |
柴油發動機.高壓燃料注射管道組件.常規要求和尺寸 |
Diesel engines - High pressure fuel injection pipe assemblies - General requirements and dimensions |
| BS ISO 13299-2003 |
感官分析.方法論.確立感覺檢測形象的通用指南 |
(Sensory analysis - Methodology - General guidance for establishing a sensory profile) |
| BS ISO 13302-2003 |
感官分析.評定食品包裝引起的味道改變的方法 |
(Sensory analysis - Methods for assessing modifications to the flavour of foodstuffs due to packaging) |
| BS ISO 13310-1997 |
鐵礦.鋅含量測定.火焰原子吸收光譜測定法 |
Iron ores - Determination of zinc content - Flame atomic absorption spectrometric method |
| BS ISO 13311-1997 |
鐵礦.鉛含量測定.火焰原子吸收光譜測定法 |
Iron ores - Determination of lead content - Flame atomic absorption spectrometric method |
| BS ISO 13312-1997 |
鐵礦石.鉀含量的測定.火焰原子吸收分光光度法 |
Iron ores - Determination of potassium content - Flame atomic absorption spectrometric method |
| BS ISO 13313-1997 |
鐵礦石.鈉含量的測定.火焰原子吸收分光光度法 |
Iron ores - Determination of sodium content - Flame atomic absorption spectrometric method |
| BS ISO 13317-1-2001 |
用重力液體沉淀法測定粒度分布.通用原則和導則 |
Determination of particle size distribution by gravitational liquid sedimentation methods - General principles and guidelines |
| BS ISO 13317-2-2001 |
用重力液體沉淀法測定粒度分布.固定移液管法 |
Determination of particle size distribution by gravitational liquid sedimentation methods - Fixed pipette method |
| BS ISO 13317-3-2001 |
用重力液體沉淀法測定粒度分布.X射線重力技術 |
Determination of particle size distribution by gravitational liquid sedimentation methods - X-ray gravitational technique |
| BS ISO 13318-1-2002 |
用離心液體沉淀法測定粒度分布.一般原則和導則 |
Determination of particle size distribution by centrifugal liquid sedimentation methods - General principles and guidelines |
| BS ISO 13318-2-2002 |
用離心力液體沉淀方法測定粒子分布尺寸.一般原則和導則.攝影離心法 |
Determination of particle size distribution by centrifugal liquid sedimentation methods - Photocentrifuge method |
| BS ISO 13318-3-2004 |
用離心液體沉淀法測定粒度分布.離心X射線法 |
|
| BS ISO 13319-2000 |
粒度分布的測定.電子感應區法 |
Determination of particle size distributions - Electrical sensing zone method |
| BS ISO 13320-1-2000 |
粒度分析.激光衍射方法.一般規則 |
Particle size analysis - Laser diffraction methods - General principles |
| BS ISO 13323-1-2002 |
粒徑分布的測定.單粒子光干擾法.光干擾問題 |
Determination of particle size distribution - Single-particle light interaction methods - Light interaction considerations |
| BS ISO 13332-2001 |
往復式內燃機.在發動機底部測量的發自高速和中速往復式內燃機的結構噪聲的試驗規范 |
Reciprocating internal combustion engines - Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet |
| BS ISO 13344-1998 |
燃燒流出物致死毒性的測定 |
Determination of the lethal toxic potency of fire effluents |
| BS ISO 13347-1-2004 |
工業風扇.標準實驗室條件下風扇聲功率級的測定.總論 |
|
| BS ISO 13347-2-2004 |
工業風扇.標準實驗室條件下風扇聲功率級的測定.混響室法 |
|
| BS ISO 13347-3-2004 |
工業風扇.標準實驗室條件下風扇聲功率級的測定.包絡面法 |
|
| BS ISO 13347-4-2004 |
工業用風扇.標準化實驗室條件下風扇聲功率級的測定.聲強法 |
|
| BS ISO 13355-2002 |
包裝.完全和滿運輸包裝和成組裝載.垂直隨機振動試驗 |
Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test |
| BS ISO 13357-1-2002 |
石油產品.潤滑油可過濾性測定.水中過濾油的程序 |
Petroleum products - Determination of the filterability of lubricating oils - Procedure for oils in the presence of water |
| BS ISO 13359-1998 |
密封管道中傳導性液體流量的測量.法蘭電磁流量計.全長 |
Measurement of conductive liquid flow in closed conduits - Flanged electromagnetic flowmeters - Overall length |
| BS ISO 13362-2001 |
撓性多孔聚合材料.潮濕條件下壓縮永久變形的測定 |
Flexible cellular polymeric materials - Determination of compression set under humid conditions |
| BS ISO 13363-2004 |
船用發動機排濕系統用橡膠和塑料軟管.規范 |
|
| BS ISO 13372-2004 |
機器的工況監測和診斷.詞匯 |
|
| BS ISO 13373-1-2002 |
條件監測和機械診斷.振動條件監測.一般程序 |
Condition monitoring and diagnostics of machines - Vibration condition monitoring - General procedures |
| BS ISO 13374-1-2003 |
機械狀態的監測和診斷.數據處理、通信和表示.一般指南 |
(Condition monitoring and diagnostics of machines - Data processing, communication and presentation - General guidelines) |
| BS ISO 13405-1-1997 |
修復和矯形外科學.修復部件的分類和描述.修復部件的分類 |
Prosthetics and orthotics - Classification and description of prosthetic components - Classification of prosthetic components |
| BS ISO 13405-2-1997 |
修復和矯形外科學.修復部件的分類和描述.下肢修復部件的描述 |
Prosthetics and orthotics - Classification and description of prosthetic components - Description of lower-limb prosthetic components |
| BS ISO 13405-3-1997 |
修復和矯形外科學.修復部件的分類和描述.上肢修復部件的描述 |
Prosthetics and orthotics - Classification and description of prosthetic components - Description of upper-limb prosthetic components |
| BS ISO 13419-2003 |
空間數據和信息傳輸系統.分包遙測 |
(Space data and information transfer systems - Packet telemetry) |
| BS ISO 13443-1997 |
天然氣.標準參考條件 |
Natural gas - Standard reference conditions |
| BS ISO 13450-1996 |
攝影.110型暗盒、膠片和外皮紙尺寸 |
Photography - 110-size cartridge, film and backing paper - Dimensions |
| BS ISO 13463-1999 |
輕水反應堆MOX燃料生產用原子核級二氧化钚粉末.幫助定義產品規范的指南 |
Nuclear-grade plutonium dioxide powder for fabrication of light water reactor MOX fuel - Guidelines to help in the definition of a product specification |
| BS ISO 13468-2-1999 |
塑料.透明材料光透射率總量的測定.雙束發射儀器 |
Plastics - Determination of the total luminous transmittance of transparent materials - Double-beam instrument |
| BS ISO 13472-1-2002 |
聲學.在線測量道路表面的聲吸收特性.延伸表面法 |
Acoustics - Measurement of sound absorption properties of road surfaces in situ - Extended surface method |
| BS ISO 13473-2-2002 |
表面輪廓用鋪路材料構造的特性描述.有關鋪路材料構造外觀的基本要求術語 |
Characterization of pavement texture by use of surface profiles - Terminology and basic requirements related to pavement texture profile analysis |
| BS ISO 13473-3-2002 |
表面輪廓用鋪路材料構造的特性描述.輪廓測定儀的規范和分類 |
Characterization of pavement texture by use of surface profiles - Specification and classification of profilometers |
| BS ISO 13475-1-2000 |
聲學.室外用的固定音響警報裝置.確定聲音發射量的現場測量 |
Acoustics - Stationary audible warning devices used outdoors - Field measurements for determination of sound emission quantities |
| BS ISO 13476-1998 |
道路車輛.點火線圈.電氣特性和試驗方法 |
Road vehicles - Ignition coils - Electrical characteristics and test methods |
| BS ISO 13486-1-1999 |
道路車輛.液壓制動系統.雙喇叭管,螺紋孔,外螺紋配件和管座 |
Road vehicles - Hydraulic braking systems - Double-flare pipes, tapped holes, male fittings and tube seats |
| BS ISO 13491-1-1999 |
銀行業務.安全密碼裝置(零售).第1部分:概念、要求和評估方法 |
Banking - Secure cryptographic devices (retail) - Concepts, requirements and evaluation methods |
| BS ISO 13491-2-2001 |
銀行業務.安全密碼裝置(零售).磁條卡片系統用裝置的安全合格清單 |
Banking - Secure cryptographic devices (retail) - Security compliance checklists for devices used in magnetic stripe cards systems |
| BS ISO 13492-1999 |
銀行業務.相關數據素的鍵控管理(零售) |
Banking - Key management related data element (retail) |
| BS ISO 13503-1-2003 |
石油和天然氣工業.完井液和材料.完井液粘性的測量 |
(Petroleum and natural gas industries - Completion fluids and materials - Measurement of viscous properties of completion fluids) |
| BS ISO 13542-1995 |
紙和紙板.卷筒芯的內徑規范 |
Paper and board - Specification for internal diameters of cores for reels |
| BS ISO 13555-1-2003 |
柴油發動機.柴油噴注設備動態計時的檢驗規程.預調節 |
(Diesel engines - Procedure for checking the dynamic timing of diesel fuel injection equipment - Preconditioning) |
| BS ISO 13555-2-2003 |
柴油機.柴油機噴油系統動態定時的檢驗程序.試驗方法 |
(Diesel engines - Procedure for checking the dynamic timing of diesel fuel injection equipment - Test method) |
| BS ISO 13555-3-2004 |
柴油發動機.柴油噴注設備動態計時的檢驗規程.定時測量設備的驗證 |
|
| BS ISO 13556-1999 |
道路車輛.排氣系統泄漏測定和設備規格 |
Road vehicles - Localization of exhaust system leaks and equipment specifications |
| BS ISO 13562-1-2001 |
工業用變距前伸式叉車.穩定性試驗 |
Industrial variable-reach trucks - Stability tests |
| BS ISO 13562-2-2001 |
工業變速卡車.長度為6米和以上的卡車裝載貨物的運輸穩定性試驗 |
Industrial variable-reach trucks - Additional stability tests for trucks handling freight containers of length 6m and above |
| BS ISO 13563-1-2001 |
單側負載叉車卡車.穩定試驗 |
Single side loading fork-lift trucks - Stablity tests |
| BS ISO 13583-1-2001 |
離心鑄造鋼和合金制品.一般試驗和公差 |
Centrifugally cast steel and alloy products - General testing and tolerances |
| BS ISO 13583-2-2003 |
離心鑄造鋼及合金產品.耐熱材料 |
(Centrifugally cast steel and alloy products - Heat resistant materials) |
| BS ISO 13584-20-1998 |
工業自動化系統和集成電路.零部件數據庫.邏輯源.表示式的邏輯模式 |
Industrial automation systems and integration - Parts library - Logical resource - Logical model of expressions |
| BS ISO 13584-42-1998 |
工業自動化系統和集成.零部件數據庫.描述方法:組構零件系列的方法 |
Industrial automation systems and integration - Parts library - Description methodology: Methodology for structuring part families |
| BS ISO 13586-2000 |
塑料.斷裂韌性的測定(G和K).線性彈性斷裂力學(LEFM)法 |
Plastics - Determination of fracture toughness (GDOWNiDOWNc and KDOWNiDOWNc) - Linear elastic fracture mechanics (LEFM) approach |
| BS ISO 13591-1998 |
小型飛行器.舷外發動機用輕便型燃料系統 |
Small craft - Portable fuel systems for outboard motors |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com