標準號 |
中文名稱 |
英文名稱 |
| BS ISO 13592-1998 |
小型飛機.汽油發動機用回火火焰控制 |
Small craft - Backfire flame control for petrol engines |
| BS ISO 1361-1998 |
薄金屬容器.開頂式二重卷邊罐圓形罐頭.內徑 |
Light-gauge metal containers - Round open-top cans - Internal diameters |
| BS ISO 13616-1998 |
銀行業務及有關金融服務.國際銀行帳號 |
Banking and related financial services - International bank account number (IBAN) |
| BS ISO 13616-2003 |
銀行業務和相關金融服務.國際銀行帳號(IBAN) |
(Banking and related financial services - International bank account number (IBAN)) |
| BS ISO 13628-5-2002 |
石油和天然氣工業.海底生產系統的設計和操作.海底生產控制系統聯系纜 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Subsea umbilicals |
| BS ISO 13628-6-2000 |
石油和天然氣工業.海底生產系統的設計和操作.海底生產控制系統的設計和操作 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Design and operation of subsea controls |
| BS ISO 13628-8-2002 |
石油和天然氣工業.水下采油系統的設計和操作.海底生產控制系統的遙控運載工具的接口 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Remotely operated vehicle (ROV) interfaces on subsea production systems |
| BS ISO 13628-9-2001 |
石油和天然氣工業.海底生產系統的設計和運行.遠程操作工具(ROT)介入系統 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Remotely operated tool (ROT) intervention systems |
| BS ISO 13640-2000 |
建筑物建造.接縫產品.試驗襯底規范 |
Building construction - Jointing products - Specifications for test substrates |
| BS ISO 13651-1997 |
塑料制品.環氧樹脂及有關材料.可皂化氯總含量的測定 |
Plastics - Epoxy resins and related materials - Determination of total saponifiable chlorine |
| BS ISO 13653-1997 |
光學和光學儀器.普通光學試驗方法.象場中有關光輝的測量 |
Optics and optical instruments - General optical test methods - Measurement of relative irradiance in the image field |
| BS ISO 13655-1997 |
制圖技術.制圖藝術成象用光譜測量和比色的計算 |
Graphic technology - Spectral measurement and colorimetric computation for graphic arts images |
| BS ISO 13656-2000 |
制版技術.過程控制的比色分析法和反射光密度分析法的應用和印刷品和印樣的評價 |
Graphic technology - Application of reflection densitometry and colorimetry to process control or evaluation of prints and proofs |
| BS ISO 13674-1-2003 |
道路車輛.沿中心駕駛的鑒定試驗.搖擺試驗 |
(Road vehicles - Test method for the quantification of on-centre handling - Weave test) |
| BS ISO 13678-2001 |
石油和天然氣工業.與套管和直管一起使用的螺紋復合物的評價和試驗 |
Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing and line pipe |
| BS ISO 13679-2003 |
石油和天然氣工業.套管和管道連接的檢驗規程 |
Petroleum and natural gas industries - Procedures for testing casing and tubing connections |
| BS ISO 13689-2001 |
冷藏輕碳?xì)湟后w.在含液化氣體的罐內液體水平的測量.微波型水平量規 |
Refrigerated light hydrocarbon fluids - Measurement of liquid levels in tanks containing liquefied gases - Microwave-type level gauge |
| BS ISO 13690-2000 |
谷類作物,豆科作物和磨制產品.靜態批量取樣 |
Cereals, pulses and milled products - Sampling of static batches |
| BS ISO 13691-2002 |
石油和天然氣工業.高速專用齒輪裝置 |
Petroleum and natural gas industries - High-speed special-purpose gear units |
| BS ISO 13704-2002 |
石油和天然氣工業.煉油廠中加熱器管厚度的校準 |
Petroleum and natural gas industries - Calculation of heater-tube thickness in petroleum refineries |
| BS ISO 13715-2004 |
技術制圖.非定義形狀的邊緣.詞匯和說明 |
|
| BS ISO 13726-1998 |
液壓傳動.內徑250mm-500mm的16MPa(160bar)壓實系列單桿液壓缸.附屬安裝尺寸 |
Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm - Accessory mounting dimensions |
| BS ISO 13737-2004 |
石油及其制品的試驗方法.BS 2000-527:石油制品及潤滑劑.潤滑脂低溫針入度的測定 |
|
| BS ISO 13738-2000 |
潤滑劑、工業用油和有關制品(L類).E系列(內燃機油).兩沖程汽油發動機油規范(類別EGB、EGC和EGD) |
Lubricants, industrial oils and related products (class L) - Family E (internal combustion engine oils) - Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD) |
| BS ISO 13740-1999 |
原油及石油產品.運輸?shù)目捎?jì)算性.遠洋油輪裝載和卸載時容器經驗參數的評估 |
Crude petroleum and petroleum products - Transfer accountability - Assessment of vessel experience factor on loading (VEFL) and vessel experience factor on discharging (VEFD) of ocean-going tanker vessels |
| BS ISO 13741-1-1998 |
塑料/橡膠.聚合物彌散體和膠乳(天然的和合成的).用毛細管柱氣相色譜分析法測定殘余單基物和其他有機成分.第1部分:直接液體噴射法 |
Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic) - Determination of residual monomers and other organic components by capillary-column gas chromatography - Direct liquid injection method |
| BS ISO 13741-2-1998 |
塑料/橡膠.聚合物彌散體和膠乳(天然的和合成的).用毛細管柱氣相色譜分析法測定殘余單基物和其他有機成分.第2部分:液面上法 |
Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic) - Determination of residual monomers and other organic components by capillary-column gas chromatography - Headspace method |
| BS ISO 13746-2001 |
紡織地板覆蓋物.鋪設及樓梯用指南 |
Textile floor coverings - Guidelines for installation and use on stairs |
| BS ISO 13752-1998 |
空氣質量.作為基準使用的第2種現場測量方法的不確定性評定 |
Air quality - Assessment of uncertainty of a measurement method under field conditions using a second method as reference |
| BS ISO 13756-1998 |
銀制珠寶合金用銀的測定.容量法(電位滴定法)用氯化鈉或氯化鉀 |
Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using sodium chloride or potassium chloride |
| BS ISO 13769-2002 |
氣瓶.印花標記 |
Gas cylinders - Stamp marking |
| BS ISO 13772-1997 |
林業機械.便攜式鏈鋸.非手動鏈鋸制動器的性能 |
Forestry machinery - Portable chainsaws - Non-manually actuated chain brake performance |
| BS ISO 13774-1999 |
運送內燃機燃料用橡膠和塑料軟管.易燃性試驗方法 |
Rubber and plastics hoses for fuels for internal combustion engines - Method of test for flammability |
| BS ISO 13775-1-2000 |
汽車用熱塑管和軟管.非燃料應用 |
Thermoplastic tubing and hoses for automotive use - Non-fuel applications |
| BS ISO 13775-2-2000 |
汽車用熱塑管和軟管.非燃料應用.石油基質燃料應用 |
Thermoplastic tubing and hoses for automotive use - Petroleum-based fuel applications |
| BS ISO 13778-1999 |
滑動軸承.薄壁軸瓦的質量保證.窄間隙域軸承的選擇組件 |
Plain bearings - Quality assurance of thin-walled half bearings - Selective assembly of bearings to achieve a narrow clearance range |
| BS ISO 13779-1-2000 |
外科植入物.羥磷灰石.陶瓷羥磷灰石 |
Impants for surgery - Hydroxyapatite - Ceramic hydroxyapatite |
| BS ISO 13779-2-2000 |
外科植入物.羥磷灰石.羥磷灰石的覆層 |
Impants for surgery - Hydroxyapatite - Coatings of hydroxyapatite |
| BS ISO 13794-1999 |
環境空氣.石棉纖維的測定.非直接轉換透射電鏡法 |
Ambient air - Determination of asbestos fibres - Indirect-transfer transmission electron microscopy method |
| BS ISO 13802-1999 |
塑料.機器擺錘沖擊試驗的驗證.Charpy,Izod和拉伸沖擊試驗 |
Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing |
| BS ISO 13804-2000 |
鋁用玻璃搪瓷.試驗樣品的生產 |
Vitreous and porcelain enamels for aluminium - Production of specimens for testing |
| BS ISO 13805-2000 |
鋁用玻璃搪瓷.在電解溶液的作用下鋁上搪瓷粘合的測定. |
Vitreous and porcelain enamels for aluminium - Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test) |
| BS ISO 13806-2000 |
玻璃質釉和瓷釉.封閉系統的腐蝕試驗 |
Vitreous and porcelain enamels - Corrosion tests in closed systems |
| BS ISO 13807-2000 |
玻璃質釉和瓷釉.化學工業用瓷釉的熱沖擊試驗中裂縫形成溫度的測定 |
Vitreous and porcelain enamels - Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry |
| BS ISO 1382-2002 |
橡膠.詞匯 |
Rubber - Vocabulary |
| BS ISO 13820-1997 |
紙,紙板和波紋紙板.壓縮試驗設備的描述和校準 |
Paper, board and corrugated fibreboard - Description and calibration of compression testing equipment |
| BS ISO 13821-2002 |
波紋紙板.耐沿邊擠壓性的測定.上蠟邊法 |
Corrugated fibreboard - Determination of edgewise crush resistance - Waxed edge method |
| BS ISO 13879-2000 |
石油和天然氣工業.功能規范的內容和起草 |
Petroleum and natural gas industries - Content and drafting of functional specifications |
| BS ISO 13880-2000 |
石油和天然氣工業.技術規范的內容和起草 |
Petroleum and natural gas industries - Content and drafting of a technical specification |
| BS ISO 13884-2003 |
動植物脂肪和油.用紅外線光譜測定法測定孤立的反式異構體 |
(Animal and vegetable fats and oils - Determination of isolated trans isomers by infrared spectrometry) |
| BS ISO 13887-2004 |
增強可成型性高屈服強度的冷軋薄鋼板 |
|
| BS ISO 13894-1-2000 |
高壓裝飾性疊層板材.復合成份.試驗方法 |
High-pressure decorative laminates - Composite elements - Test methods |
| BS ISO 13899-2-2005 |
鋼.合金鋼中Mo、Nb和W含量的測定.感應耦合等離子體原子發射光譜法.Nb含量的測定 |
|
| BS ISO 13909-1-2002 |
硬煤和焦炭.機械取樣.一般性說明 |
Hard coal and coke - Mechanical sampling - General introduction |
| BS ISO 13909-2-2002 |
硬煤和焦炭.機械取樣.流水線上的取樣 |
Hard coal and coke - Mechanical sampling - Sampling from moving streams |
| BS ISO 13909-3-2002 |
硬煤和焦炭.機械取樣.固定批量取樣 |
Hard coal and coke - Mechanical sampling - Coal - Sampling from stationary lots |
| BS ISO 13909-4-2002 |
硬煤和焦炭.機械取樣.煤.試樣制備 |
Hard coal and coke - Mechanical sampling - Coal - Preparation of test samples |
| BS ISO 13909-5-2002 |
硬煤和焦炭.機械取樣.流水線上的取樣 |
Hard coal and coke - Mechanical sampling - Sampling from moving streams |
| BS ISO 13909-6-2002 |
硬煤和焦炭.機械取樣.焦炭.試樣制備 |
Hard coal and coke - Mechanical sampling - Coke - Preparation of test samples |
| BS ISO 13909-7-2002 |
硬煤和焦炭.機械取樣.取樣精度測定方法、樣品制備和試驗 |
Hard coal and coke - Mechanical sampling - Methods for determining the precision of sampling, sample preparation and testing |
| BS ISO 13909-8-2002 |
硬煤和焦炭.機械取樣.偏差試驗方法 |
Hard coal and coke - Mechanical sampling - Methods of testing for bias |
| BS ISO 13927-2001 |
塑料.用錐形輻射加熱器和熱電堆探測器進行簡單熱釋放試驗 |
Plastics - Simple heat release test using a conical radiant heater and a thermopile detector |
| BS ISO 13942-2003 |
粘合磨料產品.極限偏差和跳動公差 |
(Bonded abrasive products - Limit deviations and run-out tolerances) |
| BS ISO 13953-2001 |
聚乙烯管和配件.從對焊接頭測定抗拉強度和試樣的斷裂形式 |
Polyethelene (PE) pipes and fittings - Determination of the tensile strength and failure mode of test pieces from a butt-fused joint |
| BS ISO 13964-1998 |
空氣質量.大氣中臭氧的測定.紫外線光度計法 |
Air quality - Determination of ozone in ambient air - Ultraviolet photometric method |
| BS ISO 13976-2005 |
結構質量和特厚的成卷熱軋鋼薄板 |
|
| BS ISO 13994-1998 |
防液體化合物的防護服裝.防護服裝材料在壓力下防液體滲透的阻力測定 |
Clothing for protection against liquid chemicals - Determination of the resistance of protective clothing materials to penetration by liquids under pressure |
| BS ISO 13999-1-1999 |
防護服裝.防止刀切傷和割傷的手套和胳膊護套.第1部分:鏈遞手套和胳膊護套 |
Protective clothing. Gloves and arm guards protecting against cuts and stabs by hand knives. Chain-mail gloves and arm guards |
| BS ISO 14004-1996 |
環境管理系統.原理,系統和技術支持用通用指南 |
Environmental management systems - General guidelines on principles, systems and supporting techniques |
| BS ISO 14004-2004 |
環境管理系統.原理、系統和技術支持用通用指南 |
|
| BS ISO 14015-2001 |
環境管理.場所和組織機構的環境評定 |
Environmental management - Environmental assessment of sites and organizations (EASO) |
| BS ISO 14021-1999 |
環境標簽和說明.自宣告環境要求(II型環境標簽) |
Environmental labels and declarations. Self-declared environmental claims (Type II environmental labelling) |
| BS ISO 14024-1999 |
環境標簽和聲明:I型環境標簽.規則和過程 |
Environmental labels and declarations. Type I environmental labelling. Principles and procedures |
| BS ISO 14050-1998 |
環境管理.詞匯 |
Environmental management - Vocabulary |
| BS ISO 14135-1-2005 |
光學及光學儀器.望遠鏡瞄準具規范.通用儀器 |
|
| BS ISO 14135-2-2005 |
光學及光學儀器.望遠鏡瞄準具規范.高性能儀器 |
|
| BS ISO 14137-2000 |
機床.金屬線放電加工機床的試驗條件.術語和準確度試驗 |
Machine tools - Test conditions for wire electrical-discharge machines (wire EDM) - Terminology and testing of the accuracy |
| BS ISO 14139-2000 |
比重測定.利用設備測量明渠流量.復合測量設備 |
Hydrometric determinations - Flow measurements in open channels using structures - Compound gauging structures |
| BS ISO 14152-2002 |
中子輻射防護屏蔽.選擇適用材料用的設計原則和考慮 |
Neutron radiation protection shielding - Design principles and considerations for the choice of appropriate materials |
| BS ISO 14154-2005 |
土質.一些選定的氯苯酚的測定.電子俘獲檢測的氣相色譜法 |
|
| BS ISO 14156-2001 |
奶及奶制品.脂類和脂溶性化合物的萃取方法 |
Milk and milk products - Extraction methods for lipids and liposoluble compounds |
| BS ISO 14164-1999 |
穩定源排放.管道中氣流容積流量比率測定.自動配置方法 |
Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method |
| BS ISO 14168-2003 |
硬金屬除外的金屬粉末.銅基滲透粉末的試驗方法 |
Metallic powders, excluding hardmetals - Method for testing copper-base infiltrating powders |
| BS ISO 14180-1998 |
固體礦物燃料.煤層取樣指南 |
Solid mineral fuels - Guidance on the sampling of coal seams |
| BS ISO 14224-1999 |
石油和天然氣工業.設備可靠性和維護數據的收集和交換 |
Petroleum and natural gas industries - Collection and exchange of reliability and maintenance data for equipment |
| BS ISO 14237-2000 |
表面化學分析.次級離子質譜法.使用非均一摻雜材料的硅中硼原子的濃度測定 |
(Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials) |
| BS ISO 14242-1-2002 |
外科植入物.髖關節假肢的總磨損.磨損的負荷和位移參數.試驗用試驗機和相應環境條件 |
(Implants for surgery - Wear of total hip joint prostheses - Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test) |
| BS ISO 14242-2-2000 |
外科植入物.髖關節假肢的磨損.測量方法 |
(Implants for surgery - Wear of total hip joint prostheses - Methods of measurement) |
| BS ISO 14243-1-2002 |
外科植入物.膝關節假肢的總磨損.試驗用有負荷控制和相應控制條件的磨損試驗機的負荷和位移參數 |
(Implants for surgery - Wear of total knee joint prostheses - Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test) |
| BS ISO 14243-2-2000 |
外科植入物.膝關節假肢的磨損.測量方法 |
Implants for surgery - Wear of total knee joint prostheses - Methods of measurement |
| BS ISO 14258-1998 |
工業自動化系統.企業模式概念和規則 |
Industrial automation systems - Concepts and rules for enterprise models |
| BS ISO 14269-1-1998 |
農業和林業用拖拉機和自驅動機械.駕駛室環境.詞匯 |
Tractors and self-propelled machines for agriculture and forestry - Operator enclosure environment - Vocabulary |
| BS ISO 14269-2-1998 |
農業和林業用拖拉機和自驅動機械.駕駛室環境.加熱、通風和空調試驗方法和性能 |
Tractors and self-propelled machines for agriculture and forestry - Operator enclosure environment - Heating, ventilating and air-conditioning test method and performance |
| BS ISO 14269-3-1998 |
農業和林業用拖拉機和自驅動機械.駕駛室環境.太陽能加熱效果測定 |
Tractors and self-propelled machines for agriculture and forestry - Operator enclosure environment - Determination of effect of solar heating |
| BS ISO 14269-4-1998 |
農業和林業用拖拉機和自驅動機械.駕駛室環境.空氣過濾件試驗方法 |
Tractors and self-propelled machines for agriculture and forestry - Operator enclosure environment - Air filter element test method |
| BS ISO 14269-5-1998 |
農業和林業用拖拉機和自驅動機械.駕駛室環境.增壓系統試驗方法 |
Tractors and self-propelled machines for agriculture and forestry - Operator enclosure environment - Pressurization system test method |
| BS ISO 14275-2002 |
航空航天.內設十字形條紋驅動器.試驗方法 |
Aerospace - Drives, internal, offset cruciform, ribbed - Metric series |
| BS ISO 14276-2002 |
航空航天.內偏距十字交叉驅動器.米制系列 |
Aerospace - Drives, internal, offset cruciform - Metric series |
| BS ISO 14277-2002 |
航空航天.內偏置十字槽或無槽扳動的扳手.米制系列 |
Aerospace - Drivers, ribbed, for internal offset cruciform ribbed or unribbed drives - Metric series |
| BS ISO 14278-2002 |
航空航天.內偏置十字槽或無槽的量規.米制系列 |
Aerospace - Gauges, for internal offset cruciform ribbed or unribbed drives - Metric series |
| BS ISO 14279-2002 |
航空航天.內十字槽扳手.米制系列 |
Aerospace - Drives, internal, cruciform - Metric series |
| BS ISO 14280-2002 |
航空航天.內十字槽或無槽扳動的扳手.米制系列 |
Aerospace - Drivers, ribbed, for internal cruciform ribbed or unribbed drives - Metric series |
| BS ISO 14281-2002 |
航空航天.內十字槽或無槽的量規.米制系列 |
Aerospace - Gauges, for internal cruciform ribbed or unribbed drives - Metric series |
| BS ISO 14300-2-2002 |
航空航天系列.程序管理.產品保證程序 |
Space systems - Programme management - Product assurance |
| BS ISO 14302-2003 |
航空航天系列.航天系統.電磁兼容性要求 |
(Aerospace series - Space systems - Electromagnetic compatibility requirements) |
| BS ISO 14303-2002 |
空間系統.控制客車對航天器的接口 |
Space systems - Launch-vehicle-to-spacecraft interfaces |
| BS ISO 1431-1-2004 |
硫化橡膠或熱塑性橡膠.耐臭氧龜裂性.靜態和動態應變試驗 |
|
| BS ISO 1431-3-2000 |
橡膠,硫化橡膠或熱塑橡膠.耐臭氧龜裂性.實驗室測定臭氧濃度的基準和交替方法 |
Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Reference and alternative methods for determining the ozone concentration in laboratory test chambers |
| BS ISO 14315-1998 |
工業金屬絲網篩規范 |
Specification for industrial wire screens |
| BS ISO 1434-1996 |
包裝的天然橡膠.包裝層上膠量的測定 |
Natural rubber in bales - Amount of bale coating - Determination |
| BS ISO 14368-1-2001 |
無機和青玉表面玻璃.尺寸和公差 |
Mineral and sapphire watch-glasses - Dimensions and tolerances |
| BS ISO 14368-2-2003 |
無機和藍寶石表面玻璃.用粘著劑或襯墊組裝外殼 |
Mineral and sapphire watch-glasses - Assembly to the case by adhesive or using a gasket |
| BS ISO 14368-3-2003 |
無機和藍寶石表玻璃.質量標準和試驗方法 |
(Mineral and sapphire watch-glasses - Qualitative criteria and test methods) |
| BS ISO 14377-2002 |
罐裝脫脂牛奶.錫含量測定.使用石墨爐原子吸收光譜測量方法 |
Canned evaporated milk - Determination of tin content - Method using graphite furnace atomic absorption spectrometry |
| BS ISO 14378-2000 |
奶和干奶粉.用高性能液相色譜法測定碘化物含量 |
Milk and dried milk - Determination of iodide content - Method using high performance liquid chromatography |
| BS ISO 14396-2002 |
往復式內燃機.測定內燃機功率的測定和試驗方法.與ISO 8178協調的廢棄排放試驗 |
Reciprocating internal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178 |
| BS ISO 14397-1-2002 |
土方機械.裝載機和挖掘機.驗證計算傾卸載荷用的額定工作量的計算和試驗方法 |
Earth-moving machinery - Loaders and backhoe loaders - Calculation of rated operating capacity and test method for verifying calculated tipping load |
| BS ISO 14397-2-2002 |
土方機械.裝載機和挖掘機.計算最大提升高度的爆發力和提升能力的試驗方法 |
Earth-moving machinery - Loaders and backhoe loaders - Test method for measuring breakout forces and lift capacity to maximum lift height |
| BS ISO 14401-2-2004 |
土方機械.觀察的視野及后視鏡視野.性能標準 |
|
| BS ISO 14401-2-2004 |
土方機械.觀察的視野及后視鏡視野.性能標準 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com