標準號 |
中文名稱 |
英文名稱 |
| BS 9940-01.0-1983 |
電子器件質量評定協調體系.電子設備用固定電阻器. 第1部分:分規范:低功率非線繞固定電阻器 |
(Harmonized system of quality assessment for electronic components - Fixed resistors for use in electronic equipment - Sectional specification: fixed low power non-wirewound resistors) |
| BS 9940-01.01-1983 |
電子器件質量評定的綜合協調體系.電子設備用固定電阻器.第1部分:空白詳細規范:低功率非線繞固定電阻器.第 |
(Harmonized system of quality assessment for electronic components - Fixed resistors for use in electronic equipment - Blank detail specification: fixed low power non-wirewound resistors - Assessment l) |
| BS 9940-03.0-1983 |
經質量評定的電子器件綜合協調體系.電子設備用固定電阻器.第3部分:分規范.精密固定電阻器 |
(Harmonized system of quality assessment for electronic components - Fixed resistors for use in electronic equipment - Sectional specification: fixed precision resistors) |
| BS 9940-03.01-1984 |
電子器件質量評定協調體系.電子設備用固定電阻器.空白詳細規范:精密固定電阻器.評定級E |
(Harmonized system of quality assessment for electronic components - Fixed resistors for use in electronic equipment - Blank detail specification: fixed precision resistors - Assessment level E) |
| BS 9940-04.0-1984 |
電子器件質量評定協調體系.電子設備用固定電阻器. 第4部分:分規范:電阻器可分別測量的固定電阻器網 |
(Harmonized system of quality assessment for electronic components - Fixed resistors for use in electronic equipment - Sectional specification: fixed resistor networks with individually measurable resi) |
| BS 9940-04.01-1984 |
電子器件質量評定協調體系.電子設備用固定電阻器.空白詳細規范:由阻值和損耗全等的可分別測量的電阻器組 |
() |
| BS 9940-04.02-1984 |
電子器件質量評定協調體系.電子設備用固定電阻器.空白詳細規范: 由可分別測量的、具有不同電阻值或不同額 |
() |
| BS 9940-05.00-1985 |
經質量評定的電子器件綜合協調體系.電子設備用固定電阻器.第5部分:分規范.不是所有的電阻器都能分別測量 |
(Harmonized system of quality assessment for electronic components - Fixed resistors for use in electronic equipment - Sectional specification: fixed resistor networks in which not all resistors are in) |
| BS 9940-05.01-1985 |
電子器件質量評定的綜合協調體系.電子設備用固定電阻器.第5部分:空白詳細規范.不是所有的電阻器都能分別 |
(Harmonized system of quality assessment for electronic components - Fixed resistors for use in electronic equipment - Blank detail specification: fixed resistor networks in which not all resistors are) |
| BS 998-1990 |
食用真空鹽規范 |
(Specification for vacuum salt for food use) |
| BS 999-1962 |
煉焦?fàn)t的試驗進度表 |
(Schedule of tests for coke ovens) |
| BS 9F 1-1992 |
航空用140g/m |
(Specification for 140 g/mUP2 linen (flax) fabric and serrated edge strip for aerospace purposes) |
| BS A 101-1969 |
鈦螺栓一般要求規范 |
(Specification for general requirements for titanium bolts) |
| BS A 22-1947 |
民用航空測量單位 |
(Units of measurement in civil aviation) |
| BS A 226-1965 |
六角頭鋼螺栓規范(短螺紋:3A類) |
(Specification for steel hexagon head bolts (short thread: Class 3A)) |
| BS A 227-1965 |
鋼平錐頭螺栓規范(3A類短螺紋) |
(Specification for steel pan head bolts (short thread: Class 3A)) |
| BS A 232-1968 |
100°埋頭鋼螺栓(160000磅力/平方英寸(110 hbar),規定扭矩槽)規范 |
(Specification for 100°countersunk head steel bolts (160 000 lbf/inUP2 (110 hbar) with Torq-set recesses)) |
| BS A 233-236-1971 |
普通六角薄螺母(3B類,UNF螺紋)規范 |
(Specification for plain hexagonal thin nut (of Class 3B UNJ thread)) |
| BS A 237-240-1971 |
普通六角螺母(3B類,UNF螺紋)規范 |
(Specification for plain hexagonal nut (of Class 3B UNJ thread)) |
| BS A 241-1973 |
抗拉強度大于或等于1250MPa(180,000磅力/平方英寸)鋼凸出頭螺栓總要求 |
(General requirements for steel protruding-head bolts of tensile strength 1250 MPa (180 000 lbf/in) |
| BS A 242, A 243, A 244, A 245- |
六角齒形頭螺母規范(3B級UNJ螺紋) |
(Specification for hexagonal castle nuts (of Class 3B UNJ thread)) |
| BS A 242-1974 |
六角槽項螺母(3B類UNF螺紋)規范 |
(Specification for hexagonal castle nuts (of Class 3B UNJ thread)) |
| BS A 246, A 247, A 248, A 249- |
六角槽頭厚螺母規范(3B級UNJ螺紋) |
(Specification for slotted hexagonal thick nuts (of Class 3B UNJ thread)) |
| BS A 246-1974 |
一字槽六角厚螺母(3B類UNF螺紋)規范 |
(Specification for slotted hexagonal thick nuts (of Class 3B UNJ thread)) |
| BS A 250, A 251, A 252, A 253- |
六角槽頭保險螺母規范(3B級UNJ螺紋) |
(Specification for slotted hexagonal shear nuts (of Class 3B UNJ thread)) |
| BS A 250-1974 |
一字槽六角抗剪螺母(3B類UNF螺紋)規范 |
(Specification for slotted hexagonal shear nuts (of Class 3B UNJ thread)) |
| BS A 254, A 255 [...]-1976 |
規范.六角頭鈦合金螺栓160 000 lbf/inUP2 (1100 MPa) |
(Specification - Hexagonal head titanium alloy bolts 160 000 lbf/inUP2 (1100 MPa)) |
| BS A 254, A 255, A 256, A 257, |
規范.六角頭鈦合金螺栓160 000 1bf/in(上標2)(1100MPa) |
(Specification - Hexagonal head titanium alloy bolts 160 000 lbf/inUP2 (1100 MPa)) |
| BS A 254-1976 |
160,000磅力/平方英寸(1100MPa)六角頭鈦合金螺栓規范 |
(Specification. Hexagonal head titanium alloy bolts 160 000 lbf/in) |
| BS A 260, A 261 [...]-1976 |
米制螺釘規范 |
(Specification for metric screws) |
| BS A 260, A 261, A 262, A 263, |
米制螺釘規范 |
(Specification for metric screws) |
| BS A 260-1976 |
米制螺釘規范 |
(Specification for metric screws) |
| BS A 266, A 267 [...]-1977 |
帶高轉距速度驅動凹槽的100 沉頭鈦合金螺栓160 000 lbf/inUP2 (1100 MPa)規范 |
(Specification for 100 ?countersunk head titanium alloy bolts 160 000 lbf/inUP2 (1100 MPa) with Hi-torque speed drive recesses) |
| BS A 266, A 267, A 268, A 269, |
有高轉矩速度旋入槽的160000lbf/in |
(Specification for 100 ?countersunk head titanium alloy bolts 160 000 lbf/inUP2 (1100 MPa) with Hi-torque speed drive recesses) |
| BS A 266-1977 |
具有高扭矩高速旋入槽的抗拉強度為160,000磅力/平方英寸(1100MPa)的100°沉頭鈦合金螺栓規范 |
(Specification for 100) |
| BS A 272-1977 |
高扭矩高速旋入槽規范:沉頭緊固件尺寸和測量 |
(Specification for Hi-torque speed drive recess: dimensions and gauging for countersunk head fasteners) |
| BS A 273-1978 |
平面控制用100°埋頭緊固件用量規的規范 |
(Specification for gauging practice for 100 ?countersunk head fasteners for flushness control) |
| BS A 275, A 276 [...]-1981 |
帶非金屬鎖緊墊片的六角自鎖螺母規范.米制系列 |
(Specification for hexagon self-locking nuts with non-metallic locking inserts - Metric series) |
| BS A 275, A 276, A 277, A 278, |
帶非金屬鎖緊插件的六角頭自鎖螺母規范.米制系列 |
(Specification for hexagon self-locking nuts with non-metallic locking inserts - Metric series) |
| BS A 275-1981 |
米制系列,具有非金屬鎖緊片的六角自鎖螺母規范 |
(Specification for hexagon self-locking nuts with non-metallic locking inserts. Metric series) |
| BS A 281, A 282 [...]-1981 |
帶非金屬鎖緊墊片的(薄)六角自鎖螺母規范.米制系列 |
(Specification for hexagon (thin) self-locking nuts with non-metallic locking inserts - Metric series) |
| BS A 281, A 282, A 283, A 284, |
帶非金屬鎖緊插件的六角頭(薄)自鎖螺母規范.米制系列 |
(Specification for hexagon (thin) self-locking nuts with non-metallic locking inserts - Metric series) |
| BS A 281-1981 |
米制系列的具有非金屬鎖緊片的六角(薄形)自鎖螺母規范 |
(Specification for hexagon (thin) self-locking nuts with non-metallic locking inserts. Metric series) |
| BS A 287, A 288 [...]-1982 |
內六角螺釘規范.米制系列 |
(Specification for hexagon socket head cap screws - Metric series) |
| BS A 287, A 288, A 289, A 290, |
六角凹頭螺釘規范.米制系列 |
(Specification for hexagon socket head cap screws - Metric series) |
| BS A 287-1982 |
米制系列的內六角螺釘規范 |
(Specification for hexagon socket head cap screws. Metric series) |
| BS A 293-1983 |
米制系列,具有非金屬鎖件的自鎖螺母采購規范 |
(Specification for procurement of self-locking nuts with non-metallic locking element - Metric series) |
| BS A 297-1987 |
米制系列旋轉緊固裝置的偏位十字形槽內驅動規范 |
(Specification for internal drive, offset cruciform recess (Torq-Set(R)) for rotary fastening devices - Metric series) |
| BS A 298-1988 |
最高工作溫度大于425℃的自鎖螺母的試驗方法 |
(Methods of test for self-locking nuts with maximum operating temperature greater than 425 鳦) |
| BS A 299-1989 |
MJ螺紋、抗拉強度為1250MPa的合金鋼螺栓采購規范 |
(Specification for procurement of alloy steel protruding head bolts with strength classification 1 250 MPa and MJ threads) |
| BS A 300-1989 |
MJ螺紋、抗拉強度為1100MPa的合金鋼螺栓采購規范 |
(Specification for procurement of alloy steel bolts with strength classification 1 100 MPa and MJ threads) |
| BS A 301-1989 |
MJ螺紋、抗拉強度為1100MPa的抗熱抗腐蝕螺栓的采購規范 |
(Procurement of corrosion and heat-resisting steel bolts with strength classification 1100 MPa and MJ threads) |
| BS A 303-1994 |
強度等級小于或等于1100 MPa,有涂層或無涂層,短長度或中長度MJ螺紋的,由金屬材料制成的,普通12角螺栓頭,普 |
(Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions) |
| BS A 304-1994 |
強度等級小于或等于1100 MPa,有涂層或無涂層,長長度MJ螺紋的,由金屬材料制成的,普通12角螺栓頭,普通或中徑 |
(Bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions) |
| BS A 305-1994 |
螺栓. 試驗方法 |
(Bolts - Test methods) |
| BS A 306-1994 |
有萬能工作臺,由金屬材料制成,經過或沒有經過表面處理,實心鉚釘尺寸 |
(Rivets, solid, universal head, metallic material, with or without surface treatment - Dimensions) |
| BS A 307-1994 |
強度等級小于或等于1100 MPa,有涂層或無涂層,長長度MJ螺紋的,由金屬材料制成的,普通花鍵頭,普通或中徑螺栓 |
(Bolts, normal spline head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions) |
| BS A 308-1994 |
強度等級小于或等于1100 MPa,有涂層或無涂層,短長度或中長度MJ螺紋的,由金屬材料制成的,普通花鍵頭,普通或 |
(Bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions) |
| BS A 309-1994 |
強度等級小于或等于1100 MPa,有涂層或無涂層,長長度MJ螺紋的,由金屬材料制成的,大六角頭,普通或中徑螺栓體 |
(Bolts, large hexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions) |
| BS A 31-54-1951 |
飛行器用英國標準低抗拉強度螺釘和螺母規范 |
(Specification for British Association (B.A.) low tensile screws and nuts for aeronautical purposes) |
| BS A 310-1995 |
大雙六角頭,標準手柄,短或中等MJ螺紋,金屬材料,涂層或不涂層,強度等級為1250MPa-1800MPa螺栓.尺寸 |
(Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1250 MPa to 1800 MPa - Dimensions) |
| BS A 311-1997 |
航空航天.強度級別小于或等于1100 MPa的涂覆或未涂覆金屬材料制標準柄的短或中等長度MJ螺紋的內部偏移十字 |
(Aerospace - Screws, 100 ?reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength) |
| BS A 312-1997 |
強度級別小于或等于1100MPa的涂覆或未涂覆金屬材料制階形柄、短或中等長度MJ螺紋的內部偏移十字形肋狀或非 |
(Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 11) |
| BS A 313-1997 |
航空航天.強度級別小于或等于1100MPa的涂覆或未涂覆金屬材料制中徑柄長MJ螺紋的內部偏移十字形肋狀或非肋狀 |
(Areospace - Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equ) |
| BS A 314-1997 |
航空航天.帶MJ螺紋的高度降低和標準交叉平面的平六角頭螺母.等級:450 MPa(室溫)/120℃、450 MPa(室溫)/235 |
() |
| BS A 315-1997 |
航空航天.帶MJ螺紋的高度降低和標準交叉平面的有槽(齒形)六角頭螺母.級別:450MPa(室溫)/120℃、450MPa(室溫 |
() |
| BS A 316-1997 |
帶MJ螺紋的標準高度和標準交叉平面的有槽(槽頂)六角頭螺母.等級:600MPa(室溫)/120℃、600MPa(室溫)/235℃、 |
() |
| BS A 317-1997 |
帶MJ螺紋的標準高度和標準交叉平面的平六角頭螺母.等級:600MPa(室溫)/120℃、600MPa(室溫)/235℃、900MPa( |
() |
| BS A 318-1997 |
帶MJ螺紋的高度降低和簡化交叉平面的有槽(槽頂)六角頭螺母.等級:450MPa(室溫)/425℃、600MPa(室溫)/235℃、 |
() |
| BS A 319-1997 |
帶MJ螺紋的高度降低和簡化交叉平面的平六角頭螺母.等級:400MPa(室溫)/425℃、600MPa(室溫)/235℃、600MPa( |
() |
| BS A 320-1997 |
雙耳浮動自鎖緊自調整MJ螺紋系緊螺母.等級:900MPa(室溫)/235℃、900MPa(室溫)/315℃、900MPa(室溫)/425℃. |
(Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235℃, 900 MPa (at ambient temperature)/315℃, 900 MPa (at ambient te) |
| BS A 321-1997 |
單耳浮動自鎖緊自調整MJ螺紋系緊螺母.等級:900MPa(室溫)/235℃、900MPa(室溫)/315℃、900MPa(室溫)/425℃. |
(Nuts, anchor, self-locking, floating, self-aligning, single lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235℃, 900 MPa (at ambient temperature)/315℃ and 900 MPa (at ambi) |
| BS A 322-1998 |
內分支凸型或非凸型驅動的金屬材料包覆或未包覆的拉伸級低于或等于1100Mpa的平頭帶螺紋螺釘.尺寸 |
(Screws, pan head, internal offset cruciform ribbed or unribbed drive, threaded to head, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions) |
| BS A 323-1998 |
十二角傳動.扳手外形.米制系列 |
(Bihexagonal drives - Wrenching configuration - Metric series) |
| BS A 324-1998 |
自鎖緊十二角MJ螺紋螺母.等級:1100MPa(室溫)/425℃、1100MPa(室溫)/650°C、1210MPa(室溫)/425°C、1210MPa |
() |
| BS A 325-1998 |
鎖緊保險絲.直徑 |
(Lockwire - Diameters) |
| BS A 326-1998 |
有或無表面處理的金屬材料制帶圓頂100°標準埋頭實心鉚釘.尺寸 |
(Rivets, solid, 100 ?normal countersunk head with dome, metallic material, with or without surface treatment - Dimensions) |
| BS A 327-1998 |
自鎖緊十二角埋頭MJ螺紋螺母.等級:1100MPa(室溫)/425℃、1100MPa(室溫)/650°C、1210MPa(室溫)/425°C、121 |
() |
| BS A 328-1-1999 |
附件裝置和安裝法蘭(米制尺寸).設計標準 |
(Accessory drives and mounting flanges (Metric sizes) - Design criteria) |
| BS A 328-2-1999 |
附件裝置和安裝法蘭(米制尺寸).尺寸 |
(Accessory drives and mounting flanges (Metric sizes) - Dimensions) |
| BS A 329-1999 |
單耳自鎖緊固定帶埋頭孔MJ螺紋系緊螺母.等級:1100MPa(室溫)/235℃、 1100MPa(室溫)/315℃和1100MPa(室溫)/4 |
(Nuts, anchor, self-locking, fixed, single lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235℃, 1100 MPa (at ambient temperature)/315℃ and 1100 MPa (at a) |
| BS A 330-1999 |
雙耳浮動自鎖緊有立方鏜孔MJ螺紋系緊螺母.等級:900MPa(室溫)/235℃、900MPa(室溫)/315℃、900MPa(室溫)/425 |
(Nuts, anchor, self-locking, floating, two lug, with incremental counterbore, with MJ threads, classifications: 900 MPa (at ambient temperature)/235℃, 900 MPa (at ambient temperature)/315℃ and 900) |
| BS A 331-1998 |
縮雙六角頭,常規的或俯仰的直徑桿,長MJ強度螺紋,金屬材料,鍍膜或非鍍膜的螺拴 |
(Bolts, reduced bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1275 MPa - Dimensions) |
| BS A 332-1999 |
航空.螺栓,有MJ螺紋.鈦合金,1100MPa強度級.征購規范 |
(Aerospace - Bolts, with MJ threads, in titanium alloys, strength class 1 100 MPa - Procurement specification) |
| BS A 333-1999 |
雙耳浮動自鎖緊有鏜孔MJ螺紋系緊螺母.等級:1100MPa(室溫)/235℃、1100MPa(室溫)/315℃和1100MPa(室溫)/425 |
(Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235℃, 1100 MPa (at ambient temperature)/315℃ and 1100 MPa (at a) |
| BS A 334-1999 |
自鎖緊90°角有鏜孔固定MJ螺紋系緊螺母.等級:1100MPa(室溫)/235℃、1100MPa(室溫)/315℃和1100MPa(室溫)/42 |
(Nuts, anchor, self-locking, fixed, 90°corner, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235℃, 1100 MPa (at ambient temperature)/315℃ and 1100 MPa (at) |
| BS A 335-1999 |
自鎖緊有鏜孔封閉角縮徑系列MJ螺紋固定系緊螺母.等級:1100MPa(室溫)/235℃、1100MPa(室溫)/315℃和1100MPa( |
() |
| BS A 336-1999 |
雙耳自鎖有鏜孔固定MJ螺紋系緊螺母.等級:1100MPa(室溫)/235℃、1100MPa(室溫)/315℃和1100MPa(室溫)/425℃. |
(Nuts, anchor, self-locking, fixed, two lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235℃, 1100 MPa (at ambient temperature)/315℃ and 1100 MPa (at ambi) |
| BS A 337-1999 |
單耳浮動自鎖有鏜孔MJ螺紋系緊螺母.等級:1100MPa(室溫)/235℃、1100MPa(室溫)/315℃和1100MPa(室溫)/425℃. |
(Nuts, anchor, self-locking, floating, single lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235℃, 1100 MPa (at ambient temperature)/315℃ and 1100 MPa (a) |
| BS A 338-1999 |
雙耳自鎖緊有鏜孔縮徑系列MJ螺紋固定系緊螺母.等級:1100MPa(室溫)/235℃、1100MPa(室溫)/315℃和1100MPa(室 |
(Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235℃, 1100 MPa (at ambient temperature)/315℃ and 1) |
| BS A 339-1999 |
雙耳浮動自鎖緊有鏜孔縮徑系列MJ螺紋固定系緊螺母.等級:1100MPa(室溫)/235℃、1100MPa(室溫)/315℃和1100MP |
(Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235℃, 1100 MPa (at ambient temperature)/315℃ an) |
| BS A 340-1999 |
自鎖緊90°角有鏜孔縮徑系列MJ螺紋固定系緊螺母.等級:1100MPa(室溫)/235℃、1100MPa(室溫)/315℃和1100MPa( |
(Nuts, anchor, self-locking, fixed, 90°corner, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235℃, 1100 MPa (at ambient temperature)/315℃ a) |
| BS A 341-1999 |
鉚釘,固體.材料 |
(Rivets, solid - Materials) |
| BS A 342-1999 |
普通或帶槽(頂槽)螺母.采購規格 |
(Nuts, plain or slotted (castellated) - Procurement specification) |
| BS A 343-1999 |
螺母、平頭或開槽的.試驗方法 |
(Nuts, plain or slotted (castellated) - Test methods) |
| BS A 344-1999 |
單耳自鎖緊有鏜孔縮徑系列MJ螺紋固定系緊螺母.等級:1100MPa(室溫)/235℃、1100MPa(室溫)/315℃和1100MPa(室 |
(Nuts, anchor, self-locking, fixed, single lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperatures)/235℃, 1100 MPa (at ambient temperature)/315℃,) |
| BS A 345-1999 |
自鎖緊有鏜孔可放置墊圈的MJ螺紋六角頭螺母.等級:1100MPa(室溫)/235℃、1100MPa(室溫)/315℃和1100MPa(室溫 |
(Nuts, hexagonal, self-locking, with counterbore and captive washer, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235℃, 1100 MPa (at ambient temperature)/315℃, 1100 MPa (at a) |
| BS A 346-2000 |
UNJ螺紋.總要求和尺寸范圍 |
(UNJ threads - General requirements and limit dimensions) |
| BS A 351-2000 |
鑷合金實心鉚釘.征購規范 |
(Rivets, solid, in nickel alloy - Procurement specification) |
| BS A 352-2000 |
鈦或鈦合金的實心鉚釘.購置規范 |
(Rivets, solid, in titanium or titanium alloy - Procurement specification) |
| BS A 353-2000 |
金屬材料制的帶MJ螺紋的涂覆或未涂覆的帶自鎖浮動螺母的插入物.尺寸 |
(Inserts, with self-locking floating nut, with MJ threads, in metallic material, coated or uncoated - Dimensions) |
| BS A 354-2000 |
金屬材料制的涂覆或未涂覆的封閉型帶MJ螺紋的自鎖插入物.尺寸 |
(Inserts, self-locking, with MJ threads, closed type, in metallic material, coated or uncoated - Dimensions) |
| BS A 355-2000 |
金屬材料覆層的或未覆層的開式MJ螺紋自鎖嵌鑲件.尺寸 |
(Inserts, self-locking, with MJ threads, open type, in metallic material, coated or uncoated - Dimensions) |
| BS A 356-2000 |
金屬材料覆層的或未覆層的閉式異徑法蘭MJ螺紋自鎖嵌鑲件.尺寸 |
(Inserts, self-locking, with MJ threads, reduced flanges, closed type, in metallic material, coated or uncoated - Dimensions) |
| BS A 357-2000 |
金屬材料制的涂覆或未涂覆的帶清潔孔的插入物.尺寸 |
(Inserts, with clearance hole, in metallic material, coated or uncoated - Dimensions) |
| BS A 358-1-2000 |
MJ螺紋.總要求 |
(MJ threads - General requirements) |
| BS A 358-2-2000 |
MJ螺紋.螺栓和螺母的尺寸范圍 |
(MJ threads - Limit dimensions for bolts and nuts) |
| BS A 358-3-2000 |
MJ螺紋.流體系統用配件的尺寸范圍 |
(MJ threads - Limit dimensions for fittings for fluid systems) |
| BS A 359-2000 |
自鎖緊浮動MJ螺紋套筒螺母.等級:900MPa(室溫)/235℃、1100MPa(室溫)/235℃、1250MPa(室溫)/235℃和1550MPa( |
(Nuts, barrel, self-locking, floating, with MJ threads, classifications - 900 MPa (at ambient temperature)/235℃, 1100 MPa (at ambient temperature)/235℃, 1250 MPa (at ambient temperature)/235℃, 15) |
| BS A 360-2000 |
自鎖套筒螺母用薄板金屬彈簧承座.尺寸 |
(Retainers, spring, sheet metal, for self-locking barrel nuts - Dimensions) |
| BS A 361-2000 |
表面經過或未經過處理的金屬材料制100度標稱埋頭實心鉚釘.尺寸 |
(Rivets, solid, 100 ?normal countersunk head, in metallic material, with or without surface treatment - Dimensions) |
| BS A 363-2000 |
由耐熱鎳基合金制成的強度等級為1550MPa的MJ螺紋螺栓 |
(Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa - Procurement specification) |
| BS A 364-2000 |
實心鉚釘.試驗方法 |
(Rivets, solid - Test method) |
| BS A 55 and 56-1951 |
飛行器用平頭螺釘規范 |
(Specifications for grub screws for aeronautical purposes) |
| BS AU 110a-1995 |
自動氣壓制動系統用橡膠軟管和軟管配件規范 |
(Specification for rubber hoses and hose assemblies for automotive air pressure braking systems) |
| BS AU 113c-1978 |
大篷車和輕便掛車用聯軸節鋼球的尺寸特性規范 |
(Specification for dimensional characteristics of coupling ball for caravans and light trailers) |
| BS AU 114b-1979 |
大篷車和輕型拖車用牽引托架和聯軸節鋼球的強度要求規范 |
(Specification for strength requirements of towing brackets and coupling balls for caravans and light trailers) |
| BS AU 138b-2000 |
牽引車輛、掛車和半掛車氣動制動系統.接觸式連接器 |
(Towing vehicle, trailer and semi-trailer pneumatic braking systems - “Contact“ type couplings) |
| BS AU 141a-1971 |
道路車輛的柴油機性能規范 |
(Specification for the performance of diesel engines for road vehicles) |
| BS AU 142-1968 |
制動襯片材料的試驗方法 |
(Methods of test for brake linings materials) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com