標準號 |
中文名稱 |
英文名稱 |
| BS EN 2591-420-2001 |
光電連接件.試驗方法.后部附近的機械強度 |
(Elements of electrical and optical connection - Test methods - Mechanical strength of rear accessories) |
| BS EN 2591-421-2002 |
光電連接件.試驗方法.自由降落 |
(Elements of electrical and optical connection - Test methods - Free fall) |
| BS EN 2591-422-2002 |
光電連接件.試驗方法.鎖定金屬線和鉆孔強度 |
(Elements of electrical and optical connection - Test methods - Locking wire hole strength) |
| BS EN 2591-424-2001 |
光電連接件.試驗方法.無釬焊纏繞連接的剝離力 |
(Elements of electrical and optical connection - Test methods - Stripping force, solderless wrapped connections) |
| BS EN 2591-425-2001 |
光電連接件.試驗方法.無釬焊纏繞連接的解纏繞能力 |
(Elements of electrical and optical connection - Test methods - Unwrapping capability, solderless wrapped connections) |
| BS EN 2591-426-2001 |
電連接和光學連接件.試驗方法.接觸固定系統有效性試驗 |
(Elements of electrical and optical connection - Test methods - Contact retention system effectiveness) |
| BS EN 2591-427-2001 |
光電連接件.試驗方法.護套附件的堅固性 |
(Elements of electrical and optical connection - Test methods - Robustness of protective cover attachment) |
| BS EN 2591-428-2002 |
光電連接件.試驗方法.有波紋的終端接線片電流通過時的正弦振動 |
(Elements of electrical and optical connection - Test methods - Sinusoidal vibrations with passage of current for crimped terminal lugs) |
| BS EN 2591-501-2002 |
光電連接件.試驗方法.軟釬焊性 |
(Elements of electrical and optical connection - Test methods - Soft solderability) |
| BS EN 2591-502-2001 |
光電連接件.試驗方法.束口 |
(Elements of electrical and optical connection - Test methods - Restricted entry) |
| BS EN 2591-503-2001 |
光電連接件.試驗方法.壓接后的觸點變形 |
(Elements of electrical and optical connection - Test methods - Contact deformation after crimping) |
| BS EN 2591-505-2001 |
光電連接件.試驗方法.觸點保護效果(防碰擦) |
(Elements of electrical and optical connection - Test methods - Contact protection effectiveness (scoop-proof)) |
| BS EN 2591-506-2001 |
光電連接件.試驗方法.工具的使用 |
(Elements of electrical and optical connection - Test methods - Use of tools) |
| BS EN 2591-507-2002 |
光電連接件.試驗方法.電鍍孔隙率 |
(Elements of electrical and optical connection - Test methods - Plating porosity) |
| BS EN 2591-508-2002 |
光電連接件.試驗方法.觸點涂層的厚度測量 |
(Elements of electrical and optical connection - Test methods - Measurement of thickness of coating on contacts) |
| BS EN 2591-509-2001 |
光電連接件.試驗方法.觸點涂層的附著力 |
(Elements of electrical and optical connection - Test methods - Adhesion of coating on contacts) |
| BS EN 2591-512-2002 |
光電連接件.試驗方法.密封連接器外殼的固定有效性 |
(Elements of electrical and optical connection - Test methods - Effectiveness of non-removable fixing of hermetically sealed connector shell) |
| BS EN 2591-513-2002 |
光電連接件.試驗方法.導磁性 |
(Elements of electrical and optical connection - Test methods - Magnetic permeability) |
| BS EN 2591-514-2002 |
光電連接件.試驗方法.有自制焊料和助熔劑的焊接點的可焊性 |
(Elements of electrical and optical connection - Test methods - Solderability of contacts with self-contained solder and flux) |
| BS EN 2591-601-2001 |
光電連接件.試驗方法.光學件.插入損失 |
(Elements of electrical and optical connection - Test methods - Optical elements - Insertion loss) |
| BS EN 2591-602-2001 |
光電連接件.試驗方法.光學件.衰減和光學不連續性的變化 |
(Elements of electrical and optical connection - Test methods - Optical elements - Variation of attenuation and optical discontinuity) |
| BS EN 2591-603-2002 |
光電連接件.試驗方法.光學件.功率分配的變化 |
(Elements of electrical and optical connection - Test methods - Optical elements - Change of power distribution) |
| BS EN 2591-604-2001 |
光電連接件.試驗方法.光學件.光學表面的清潔能力 |
(Elements of electrical and optical connection - Test methods - Optical elements - Cleaning capability of optical face) |
| BS EN 2591-605-2002 |
光電連接件.試驗方法.光學件.返回損失 |
(Elements of electrical and optical connection - Test methods - Optical elements - Return loss) |
| BS EN 2591-606-2002 |
航空航天系列.光電連接件.試驗方法.光學件.串音 |
(Aerospace series - Elements of electrical and optical connection - Test methods - Optical elements - Crosstalk) |
| BS EN 2591-607-2002 |
光電連接件.試驗方法.光學件.對周圍光耦合的免疫性 |
(Elements of electrical and optical connection - Test methods - Optical elements - Immunity to ambient light coupling) |
| BS EN 2591-610-2001 |
光電連接件.試驗方法.光學件.電纜附著的效果.電纜拉拔 |
(Elements of electrical and optical connection - Test methods - Optical elements - Effectiveness of cable attachment - Cable pulling) |
| BS EN 2591-6101-2001 |
光電連接件.試驗方法.光學件.外觀檢查 |
(Elements of electrical and optical connection - Test methods - Optical elements - Visual examination) |
| BS EN 2591-611-2001 |
光電連接件.試驗方法.光學件.電纜附著的效果.電纜扭轉 |
(Elements of electrical and optical connection - Test methods - Optical elements - Effectiveness of cable attachment - Cable torsion) |
| BS EN 2591-612-2001 |
光電連接件.試驗方法.光學件.電纜附著的效果.電纜軸向壓縮 |
(Elements of electrical and optical connection - Test methods - Optical elements - Effectiveness of cable attachment - Cable axial compression) |
| BS EN 2591-613-2002 |
光電連接件.試驗方法.光學件.碰撞試驗 |
(Elements of electrical and optical connection - Test methods - Optical elements - Impact test) |
| BS EN 2591-614-2002 |
航空航天系列.光電連接件.試驗方法.光學件.放射部分壓縮連接件 |
(Aerospace series - Elements of electrical and optical connection - Test methods - Optical elements - Connector radial compression) |
| BS EN 2591-615-2001 |
光電連接件.試驗方法.光學件.熱環境下的連接完整性 |
(Elements of electrical and optical connection - Test methods - Optical elements - Connection integrity at temperature) |
| BS EN 2591-617-2002 |
航空航天系列.光電連接件.試驗方法.光學件.循環溫度 |
(Aerospace series - Elements of electrical and optical connection - Test methods - Optical elements - Temperature cycling) |
| BS EN 2591-6301-2001 |
光電連接件.試驗方法.光學件.耐熱性 |
(Elements of electrical and optical connection - Test methods - Optical elements - Endurance at temperature) |
| BS EN 2591-6303-2001 |
光電連接件.試驗方法.光學件.冷/低壓和濕熱試驗 |
(Elements of electrical and optical connection - Test methods - Optical elements - Cold/low pressure and damp heat) |
| BS EN 2591-6305-2001 |
光電連接件.試驗方法.光學件.溫度的快速變化 |
(Elements of electrical and optical connection - Test methods - Optical elements - Rapid change of temperature) |
| BS EN 2591-6306-2001 |
光電連接件.試驗方法.光學件.長霉 |
(Elements of electrical and optical connection - Test methods - Optical elements - Mould growth) |
| BS EN 2591-6307-2001 |
光電連接件.試驗方法.光學件.鹽霧 |
(Elements of electrical and optical connection - Test methods - Optical elements - Salt mist) |
| BS EN 2591-6314-2001 |
光電連接件.試驗方法.光學件.低氣壓的水浸試驗 |
(Elements of electrical and optical connection - Test methods - Optical elements - Immersion at low air pressure) |
| BS EN 2591-6315-2001 |
光電連接件.試驗方法.光學件.耐流動性 |
(Elements of electrical and optical connection - Test methods - Optical elements - Fluid resistance) |
| BS EN 2591-6316-2001 |
光電連接件.試驗方法.光學件.耐臭氧性 |
(Elements of electrical and optical connection - Test methods - Optical elements - Ozone resistance) |
| BS EN 2591-6317-2002 |
光電連接件.試驗方法.光學件.易燃性 |
(Elements of electrical and optical connection - Test methods - Optical elements - Flammability) |
| BS EN 2591-6318-2002 |
光電連接件.試驗方法.光學件.耐火性 |
(Elements of electrical and optical connection - Test methods - Optical elements - Fire resistance) |
| BS EN 2591-6321-2002 |
航空航天系列.光電連接件.試驗方法.光學件.有毒熱,循環試驗 |
(Aerospace series - Elements of electrical and optical connection - Test methods - Optical elements - Damp heat, cyclic test) |
| BS EN 2591-6323-2002 |
航空航天系列.光電連接件.試驗方法.光學件.熱沖擊(密封設施) |
(Aerospace series - Elements of electrical and optical connection - Test methods - Optical elements - Thermal shock (Hermetically sealed devices)) |
| BS EN 2591-6324-2002 |
光電連接件.試驗方法.光學件.密封層 |
(Elements of electrical and optical connection - Test methods - Optical elements - Interfacial sealing) |
| BS EN 2591-6401-2001 |
光電連接件.試驗方法.光學件.穩定的加速度 |
(Elements of electrical and optical connection - Test methods - Optical elements - Acceleration steady state) |
| BS EN 2591-6402-2001 |
光電連接件.試驗方法.光學件.沖擊 |
(Elements of electrical and optical connection - Test methods - Optical elements - Shock) |
| BS EN 2591-6403-2001 |
光電連接件.試驗方法.光學件.振動 |
(Elements of electrical and optical connection - Test methods - Optical elements - Vibrations) |
| BS EN 2591-6404-2002 |
光電連接件.試驗方法.光學件.橫向荷載 |
(Elements of electrical and optical connection - Test methods - Optical elements - Transverse load) |
| BS EN 2591-6405-2002 |
光電連接件.試驗方法.光學件.軸向荷載 |
(Elements of electrical and optical connection - Test methods - Optical elements - Axial load) |
| BS EN 2591-6406-2002 |
光電連接件.試驗方法.光學件.機械耐久性 |
(Elements of electrical and optical connection - Test methods - Optical elements - Mechanical endurance) |
| BS EN 2591-6414-2002 |
光電連接件.試驗方法.光學件.脫鉤拉索式光學連接件的不配合性 |
(Elements of electrical and optical connection - Test methods - Optical elements - Unmating of lanyard release optical connection elements) |
| BS EN 2591-6415-2002 |
光電連接件.試驗方法.光學件.檢測探針損傷 |
(Elements of electrical and optical connection - Test methods - Optical elements - Test probe damage) |
| BS EN 2591-701-2001 |
光電連接件.試驗方法.電氣件.耦合器開路阻抗的測量 |
(Elements of electrical and optical connection - Test methods - Electrical elements - Measurement of open circuit impedance of couplers) |
| BS EN 2591-702-2001 |
光電連接件.試驗方法.電氣件.耦合器的信號失真測量 |
(Elements of electrical and optical connection - Test methods - Electrical elements - Measurement of signal distortion of couplers) |
| BS EN 2591-703-2001 |
光電連接件.試驗方法.電氣件.耦合器的共態抑制 |
(Elements of electrical and optical connection - Test methods - Electrical elements - Common mode rejection of couplers) |
| BS EN 2591-704-2001 |
光電連接件.試驗方法.電氣件.用于連接器的變壓器的線圈系數的測量 |
(Elements of electrical and optical connection - Test methods - Electrical elements - Measurement of turns ratio on a transformer used in a coupler) |
| BS EN 2591-705-2001 |
光電連接件.試驗方法.電氣件.耦合器的短線輸入阻抗測量 |
(Elements of electrical and optical connection - Test methods - Electrical elements - Measurement of stub input impedance of couplers) |
| BS EN 2591-706-2001 |
光電連接件.試驗方法.電氣件.傳輸試驗 |
(Elements of electrical and optical connection - Test methods - Electrical elements - Transmission test) |
| BS EN 2591-707-2001 |
光電連接件.試驗方法.電氣件.總線或短線端子的特征阻抗測量 |
(Elements of electrical and optical connection - Test methods - Electrical elements - Measurement of characteristic impedance of a bus or a stub terminator) |
| BS EN 2591-708-2001 |
光電連接件.試驗方法.電氣件.耦合器的表面?zhèn)鬏斪杩箿y量 |
(Elements of electrical and optical connection - Test methods - Electrical elements - Measurement of surface transfer impedance of couplers) |
| BS EN 2591-709-2001 |
光電連接件.試驗方法.電氣件.耦合器的抗拉強度 |
(Elements of electrical and optical connection - Test methods - Electrical elements - Tensile strength of couplers) |
| BS EN 2591-7301-2001 |
光電連接件.試驗方法.電氣件.耦合器的耐熱性 |
(Elements of electrical and optical connection - Test methods - Electrical elements - Temperature endurance of couplers) |
| BS EN 2592-1991 |
溫度補償?shù)摹㈩~定電流為25A及其以下的3極電路斷路器規范.產品標準 |
(Specification for three-pole circuit breakers, temperature compensated, rated currents up to 25 A. Product standard) |
| BS EN 25923-1990 |
滅火介質.二氧化碳 |
(Fire extinguishing media - Carbon dioxide) |
| BS EN 2596-1990 |
不銹鋼徑向鋸齒形花鍵鎖緊墊圈尺寸規范 |
(Specification for washers, lock, with radial serrations, in corrosion resisting steel, cadmium plated - Dimensions) |
| BS EN 2597-1998 |
碳纖維疊層板材.單向疊層板材.垂直于纖維方向的拉伸試驗 |
(Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction) |
| BS EN 25978-1993 |
橡膠或塑料涂覆織物.耐粘結性的測定 |
(Rubber- or plastics-coated fabrics - Determination of blocking resistance) |
| BS EN 2599-2001 |
航空航天系列.鋁和鋁合金帶.厚度0.25mm,3.2mm.尺寸 |
(Aerospace series - Strips in aluminium and aluminium alloys - Thickness 0,25 mm) |
| BS EN 26-1998 |
配備氣燃爐供應家用熱水的即時燃氣熱水器 |
(Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners) |
| BS EN 2601-1996 |
可調節叉型件端部.技術規范 |
(Fork ends, adjustable - Technical specification) |
| BS EN 2609-1989 |
操縱鋼索銅鋅合金轉筒規范.尺寸和負載 |
(Specification for turnbarrels, control cable in copper-zinc alloys - Dimensions and loads) |
| BS EN 26098-1992 |
信息處理.寬度為12.7mm(0.5in)磁帶的自裝盒式磁帶機 |
(Information processing - Self-loading cartridges for 12,7 mm (0,5 in) wide magnetic tape) |
| BS EN 26157-1-1992 |
緊固件的表面不均勻性.第1部分:一般要求的螺栓、螺釘和螺柱 |
(Fasteners - Surface discontinuities - Bolts, screws and studs for general requirements) |
| BS EN 26157-3-1992 |
緊固件的表面不均勻性.第3部分:特殊要求的螺栓、螺釘和螺柱 |
(Fasteners - Surface discontinuities - Bolts, screws and studs for special requirements) |
| BS EN 2617-2001 |
航空航天系列.鈦和鈦合金板材.厚度6mm $0L a |
(Aerospace Series - Plates in titanium and titanium alloys - Thickness 6 mm) |
| BS EN 2622-2001 |
航空航天系列.流體用耐熱合金制成的圓形管材.直徑3.2mm 100mm.尺寸 |
(Aerospace Series - Circular tubes, for fluids in heat resisting alloys - Diameter 3,2 mm) |
| BS EN 263-2002 |
家用浴室和淋浴箱用交叉連接鑄造丙烯酸類薄壁 |
(Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes) |
| BS EN 2630-1994 |
AL-P7009-T74511鋁合金.有周圍粗糙顆�？刂圃O備的擠壓棒材和型材a或D為125mm |
(Aluminium alloy AL-P7009-T74511 - Extruded bars and sections a or D) |
| BS EN 2632-1994 |
鋁合金AL-P7075-T73511.擠壓棒材和型材.a/D≤100mm,周邊粗�？刂� |
(Aluminium alloy AL-P7075-T73511 - Extruded bars and sections a or D) |
| BS EN 2633-1994 |
鋁合金AL-P2024-T3511.擠壓棒材和型材.a/D≤150mm,周邊粗�？刂� |
(Aluminium alloy AL-P2024-T3511 - Extruded bars and sections 1,2 mm) |
| BS EN 2636-1994 |
鋁合金AL-P6082-T6.擠壓棒材和型材.a/D≤200mm,周邊粗�？刂� |
(Aluminium alloy AL-P6082-T6 - Extruded bars and sections a or D) |
| BS EN 26360-2-1998 |
牙科學.旋轉式牙科器械.數字編碼體系.形狀和特殊性能. |
(Dentistry - Dental rotary instruments - Number coding system - Shape and specific characteristics) |
| BS EN 264-1991 |
采用液體燃料的成套燃燒設備用安全斷路裝置的安全要求和試驗方法規范 |
(Specification for safety requirements and testing of safety shut-off devices for combustion plants using liquid fuels) |
| BS EN 2641-1989 |
操縱鋼索組裝規范.組合與尺寸 |
(Specification for control cable assemblies - Combinations and dimensions) |
| BS EN 2644-1998 |
飛行控制桿部件.技術規范 |
(Rod assemblies for flight controls - Technical specification) |
| BS EN 26461-1-1993 |
水質.還原亞硫酸鹽厭氧菌芽胞(梭狀芽胞桿菌)的探測和計數.液態介質增菌法 |
(Water quality - Detection and enumeration of the spores of sulfite-reducing anaerobes (Clostridia) - Method by enrichment in a liquid medium) |
| BS EN 26461-2-1993 |
水質.還原亞硫酸鹽厭氧菌芽胞(梭狀芽胞桿菌)的探測和計數.第2部分:膜濾法 |
(Water quality - Detection and enumeration of the spores of sulfite-reducing anaerobes (Clostridia) - Method by membrane filtration) |
| BS EN 2647-1995 |
MoS2潤滑的鍍鎘合金鋼六角頭自鎖緊球座螺母.等級:900MPa(室溫)/235℃ |
(Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoSDOWN2 lubricated - Classification: 900 MPa (at ambient temperature)/235 鳦) |
| BS EN 2648-1995 |
鍍鎘合金鋼凹形墊圈 |
(Washers, concave, in alloy steel, cadmium plated) |
| BS EN 2649-1995 |
鍍鎘合金鋼頭部加螺紋的大柱頭有槽螺釘.等級:900MPa(室溫)/235℃ |
(Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated - Classification - 900 MPa (at ambient temperature)/235 鳦) |
| BS EN 2650-1997 |
頭部加螺紋的鈍化耐蝕鋼制大柱頭有槽螺釘.等級:600MPa(室溫)/425℃ |
(Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature) /425 鳦) |
| BS EN 26501-1992 |
鎳鐵合金.規范和交貨要求 |
(Ferronickel - Specification and delivery requirements) |
| BS EN 2651-1997 |
鍍錫黃銅制頭部加螺紋的大柱頭有槽螺釘.等級:380MPa(室溫)/80℃ |
(Screws, pan head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80 鳦) |
| BS EN 2652-1997 |
鍍鎘合金鋼制頭部加螺紋的100°標準埋頭有槽螺釘.等級:900MPa(室溫)/235℃ |
(Screws, 100 ?countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 鳦) |
| BS EN 2653-1997 |
鈍化耐蝕鋼制頭部加螺紋的100°標準埋頭有槽螺釘.等級:600MPa(室溫)/425℃ |
(Screws, 100 ?countersunk normal head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature) /425 鳦) |
| BS EN 2654-1997 |
鍍錫黃銅制頭部加螺紋的100°標準埋頭有槽螺釘.等級:380MPa(室溫)/80℃ |
(Screws, 100 ?countersunk normal head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80 鳦) |
| BS EN 26553-1991 |
自動汽水分離器標志規范 |
(Specification for marking of automatic steam traps) |
| BS EN 26554-1991 |
法蘭式自動汽水分離器的面至面尺寸規范 |
(Specification for face-to-face dimensions for flanged automatic steam traps) |
| BS EN 2656-2001 |
航空航天系列.管連接件.焊接的連接件端頭.幾何配置 |
(Aerospace series - Pipe coupling - Coupling end, welded - Geometric configuration) |
| BS EN 26590-1-1993 |
包裝.袋.第1部分:詞匯和類型.紙袋 |
(Packaging - Sacks - Vocabulary and types - Paper sacks) |
| BS EN 26590-2-1993 |
包裝.袋.第2部分:詞匯和類型.熱塑性塑料軟薄膜袋 |
(Packaging - Sacks - Vocabulary and types - Sacks made from thermoplastic flexible film) |
| BS EN 26591-1-1993 |
包裝.袋.第1部分:測量的方法和說明.空紙袋 |
(Packaging - Sacks - Description and method of measurement - Empty paper sacks) |
| BS EN 26591-2-1993 |
包裝.袋.第2部分:測量的方法和說明.熱塑性塑料軟薄膜空袋 |
(Packaging - Sacks - Description and method of measurement - Empty sacks made from thermoplastic flexible film) |
| BS EN 26595-1983 |
水質.砷總含量測定.二乙基二硫代氨基甲酸銀分光光度法 |
(Water quality - Determination of total arsenic - Silver diethyldithiocarbamate spectrophotometric method) |
| BS EN 26599-1-1993 |
包裝袋.檢驗的環境調節.第1部分:紙袋 |
(Packaging - Sacks - Conditioning for testing - Paper sacks) |
| BS EN 266-1992 |
纖維墻面覆層規范 |
(Specification for textile wallcoverings) |
| BS EN 2665-003-1999 |
溫度補償?shù)念~定電流為20A至50A的三極電路斷路器.米制螺紋終端.產品標準 |
(Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A. Metric thread terminals - Product standard) |
| BS EN 2665-004-1999 |
溫度補償?shù)念~定電流為20A至50A的三極電路斷路器.UNC螺紋終端.產品標準 |
(Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A. UNC thread terminals - Product standard) |
| BS EN 2667-6-2002 |
航空航天系列.非金屬材料.泡沫結構粘合劑.試驗方法.測定水吸收率 |
(Aerospace series - Non-metallic materials - Foaming structural adhesives - Test methods - Determination of water absorption) |
| BS EN 267-1999 |
強制通風油燃燒器.定義、要求、試驗和標記 |
(Forced draught oil burners - Definitions, requirements, testing, marking) |
| BS EN 26704-1991 |
自動汽水分離器分類 |
(Classification of automatic steam traps) |
| BS EN 26777-1984 |
水質.物理.化學和生物化學方法.亞硝酸鹽的分子吸收光譜測定方法 |
(Water quality - Physical, chemical and biochemical methods - Determination of nitrite: molecular absorption spectrometric method) |
| BS EN 268-1991 |
工業用爆炸品的發射藥規范.要求和試驗方法 |
(Specification for propellants for commercial ammunition - Requirements and test methods) |
| BS EN 26801-1985 |
橡膠和塑料軟管體積膨脹的測定 |
(Rubber or plastics hoses - Determination of volumetric expansion) |
| BS EN 26802-1991 |
金屬絲增強橡膠塑料軟管及軟管配件.抗沖擊試驗 |
(Rubber and plastics hoses and hose assemblies - Wire reinforced - Hydraulic impulse test with flexing) |
| BS EN 26848-1991 |
惰性氣體保護電弧焊用和等離子切割與焊接用鎢電極規范 |
(Specification for tungsten electrodes for inert gas shielded arc welding and for plasma cutting and welding) |
| BS EN 26874-1989 |
牙科樹脂基凹坑和裂隙密封劑 |
(Specification for dental resin-based pit and fissure sealants) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com