標準號 |
中文名稱 |
英文名稱 |
| BS 4513-1969 |
輻射屏蔽用的鉛磚規范 |
(Specification for lead bricks for radiation shielding) |
| BS 4514-2001 |
82.4mm最小平均外徑的未增塑聚氯乙烯污水管和通風管以及82.4mm和其他尺寸的配件和附件.規范 |
(Unplasticized PVC soil and ventilating pipes of 82.4 mm minimum mean outside diameter, and fittings and accessories of 82.4 mm and of other sizes - Specification) |
| BS 4515-1-2000 |
陸地和近海鋼管道焊接規范.碳及碳錳鋼管 |
(Specification for welding of steel pipelines on land and offshore - Carbon and carbon manganese steel pipelines) |
| BS 4515-1-2004 |
陸地和近海鋼管道焊接規范.碳及碳錳鋼管 |
|
| BS 4515-2-1999 |
近海和陸地鋼管焊接規范.雙不銹鋼管道 |
(Specification for welding of steel pipelines on land and offshore - Duplex stainless steel pipelines) |
| BS 4517-1969 |
正齒輪和斜齒輪傳動電動機組件的尺寸規范(米制系列) |
(Specification for dimensions of spur and helical geared motor units (metric series)) |
| BS 4518-1982 |
環形密封圈(“O“形環)及其安裝座的米制尺寸規格 |
(Specification for metric dimensions of toroidal sealing rings (’O’-rings) and their housings) |
| BS 4521-1.1-1971 |
專用鐵路道岔規范.第1部分:英國鐵路機車運行道岔.第1節:工字鋼軌道岔 |
(Specification for railway turnouts for private users - Turnouts over which British Railways locomotives operate - Turnouts using bull head rails) |
| BS 4521-1.2-1971 |
專用鐵路道岔規范.第1部分:英國鐵路機車運行道岔.第2節:平底鋼軌道岔 |
(Specification for railway turnouts for private users - Turnouts over which British Railways locomotives operate - Turnouts using flat bottom rail) |
| BS 4521-2-1975 |
專用鐵路道岔規范.第2部分:英國鐵路機車不運行的、軸負荷不超過10噸的輕型平底鋼軌岔道 |
(Specification for railway turnouts for private users - Light grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 10 tons, using flat bottom rails) |
| BS 4521-3.1-1974 |
專用鐵路道岔規范.第3部分:英國鐵路機車不運行的、軸負荷不超過25噸的中型道岔.第1節:工字鋼軌道岔 |
(Specification for railway turnouts for private users - Medium grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 25 tons - Turnouts using bull head rai) |
| BS 4521-3.2-1975 |
專用鐵路道岔規范.第3部分:英國鐵路機車不運行的、軸負荷不超過25噸的中型道岔.第2節:平底鋼軌道岔 |
(Specification for railway turnouts for private users - Medium grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 25 tons - Turnouts using flat bottom r) |
| BS 4521-4-1975 |
專用鐵路道岔規范.第4部分:英國鐵路機車不運行的、軸負荷可超過25噸的重型平底鋼軌岔道 |
(Specification for railway turnouts for private users - Heavy grade turnouts over which British Railways locomotives do not operate, for axle loads which may exceed 25 tons, using flat bottom rails) |
| BS 4522-1988 |
工業用液態化工產品在20℃時絕對密度的測定方法 |
(Method for determination of absolute density at 20 鳦 of liquid chemical products for industrial use) |
| BS 4524-1983 |
水浴鍋蒸發殘余物的測定方法 |
(Method for determination of residue on evaporation on a water bath) |
| BS 4531-1986 |
輕便式和移動式槽形皮帶輸送機規范 |
(Specification for portable and mobile troughed belt conveyors) |
| BS 4532-1969 |
潛水呼吸管和面罩規范 |
(Specification for snorkels and face masks) |
| BS 4533-102.1-1990 |
燈具.特殊要求.一般用固定式燈具規范 |
(Luminaires - Particular requirements - Specification for fixed general purpose luminaires) |
| BS 4533-102.17-1990 |
燈具.第2部分:特殊要求.第17節:舞臺照明、電視和電影攝影場(室內外)用燈具 |
(Luminaires - Particular requirements - Specification for luminaires for stage lighting, television, film and photographic studios (outside and indoor)) |
| BS 4533-102.19-1990 |
燈具.特殊要求.空氣調節燈具(安全要求)規范 |
(Luminaires - Particular requirements - Specification for air-handling luminaires (safety requirements)) |
| BS 4533-102.9-1990 |
照明具.特殊要求.攝影照明用燈規范 |
(Luminaires - Particular requirements - Specification for photo and film luminaires (non-professional)) |
| BS 4536-1970 |
與鋼絲繩配合使用的重型滑輪組規范 |
(Specification for heavy duty pulley blocks for use with wire rope) |
| BS 4540-1-1981 |
香料和調味品的取樣.第1部分:取樣方法 |
(Sampling of spices and condiments - Methods of sampling) |
| BS 4540-2-1982 |
香料和調味品的取樣.第2部分:分析用研碎樣品的制備方法 |
(Sampling of spices and condiments - Method for preparation of a ground sample for analysis) |
| BS 4542-1970 |
薄型電絕緣材料損耗角正切值和介電常數的測定方法(楞氏法) |
(Method for determination of loss tangent and permittivity of electrical insulating materials in sheet form (Lynch method)) |
| BS 4543-2-1990 |
工廠預制隔絕煙囪.第2部分:固定式固體燃料裝置用帶不銹鋼煙道內襯的煙囪規范 |
(Factory-made insulated chimneys - Specification for chimneys with stainless steel flue linings for use with solid fuel fixed appliances) |
| BS 4543-3-1990 |
工廠預制隔絕煙囪.第3部分:燃油裝置用煙囪不銹鋼內襯規范 |
(Factory-made insulated chimneys - Specification for chimneys with stainless steel fluelining for use with oil fired appliances) |
| BS 4548-1987 |
工業用同步皮帶傳動規范 |
(Specification for synchronous belt drives for industrial applications) |
| BS 4549-1-1997 |
增強塑料模塑件的質量控制要求指南.玻璃纖維增強聚酯樹脂模塑件質量控制方案制定指南 |
(Guide to quality control requirements for reinforced plastics mouldings - Guide to the preparation of a scheme to control the quality of glass reinforced polyester mouldings) |
| BS 4550-0-1978 |
水泥的試驗方法.第0部分:概述 |
(Methods of testing cement - General introduction) |
| BS 4550-3.1-1978 |
水泥的試驗方法.物理試驗.介紹 |
(Methods of testing cement - Physical tests - Introduction) |
| BS 4550-3.8-1978 |
水泥的試驗方法.物理試驗.水合作用熱試驗 |
(Methods of testing cement - Physical tests - Test for heat of hydration) |
| BS 4550-6-1978 |
水泥的試驗方法.灰漿立方塊體試用標準砂 |
(Methods of testing cement - Standard sand for mortar cubes) |
| BS 4551-2-1998 |
找平層、灰泥和灰漿的試驗方法.化學分析和集料分級 |
(Methods of testing mortars, screeds and plasters - Chemical analysis and aggregate grading) |
| BS 4551-2005 |
灰漿.灰漿的試驗方法.化學分析和物理試驗 |
|
| BS 4552-1-1979 |
壓燃式發動機的燃油濾油器粗濾器和沉淀器.第1部分:試驗方法 |
(Fuel filters, strainers and sedimentors for compression-ignition engines - Methods of test) |
| BS 4553-1-1998 |
600/1000V單相分芯同軸電纜規范.帶聚氯乙烯絕緣層的電纜 |
(Specification for 600/1000 V single-phase split concentric electric cables - Cables having PVC insulation) |
| BS 4553-2-1998 |
600/1000V單相分芯同軸電纜規范.帶熱固絕緣層的電纜 |
(Specification for 600/1000 V single-phase split concentric electric cables - Cables having thermosetting insulation) |
| BS 4553-3-1998 |
600/1000V單相分芯同軸電纜規范.帶熱固絕緣層和受火影響時有低發散煙霧和腐蝕性氣體的電纜 |
(Specification for 600/1000 V single-phase split concentric electric cables - Cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire) |
| BS 4554-1970 |
紡織織物潤濕度的試驗方法 |
(Method of test for wettability of textile fabrics) |
| BS 4559-4-2000 |
校正用混合氣體的制備方法.混合氣體制備證書 |
(Methods for preparation of calibration gas mixtures - Certificate of mixture preparation) |
| BS 4559-5.1-1987 |
標定混合氣體的制備方法.第5部分:動態容積法.第1節:校準方法的檢查 |
(Methods for preparation of calibration gas mixtures - Dynamic volumetric methods - Review of methods of calibration) |
| BS 4559-5.4-1987 |
標定混合氣體的制備方法.第5部分:動態容積法.第4節:連續注入法 |
(Methods for preparation of calibration gas mixtures - Dynamic volumetric methods - Continuous injection method) |
| BS 4559-6-1981 |
標定混合氣體的制備方法.第6部分:飽和法 |
(Methods for preparation of calibration gas mixtures - Saturation method) |
| BS 4559-9.2-1988 |
標定混合氣體的制備方法.比較法和溯源能力的確定方法.比較檢驗方法 |
(Methods for preparation of calibration gas mixtures - Comparison methods and methods for establishing traceability - Checking by a comparison method) |
| BS 456-1961 |
跟蹤電路絕緣的尺寸規范 |
(Specification for dimensions of track circuit insulation) |
| BS 4560-1990 |
制服衣襯用織物規范 |
(Specification for fabrics for linings in uniform clothing) |
| BS 4566-1970 |
有孔展覽板展示商品用包裝展示孔規范 |
(Specification for slots for packages for pegboard display) |
| BS 4568-1-1970 |
電氣裝置用ISO型米制螺紋鋼導管及配件規范.第1部分:鋼導管、彎頭和接頭 |
(Specification for steel conduit and fittings with metric threads of ISO form for electrical installations - Steel conduit, bends and couplers) |
| BS 4569-1983 |
起絨織物及表面植絨織物可燃性(表面閃光)試驗方法 |
(Method of test for ignitability (surface flash) of pile fabrics and assemblies having pile on the surface) |
| BS 4570-1985 |
鋼鑄件的熔焊技術規范 |
(Specification for fusion welding of steel castings) |
| BS 4573-1970 |
二銷可換向的插頭和剃須刀輸出插座規范 |
(Specification for 2-pin reversible plugs and shaver socket-outlets) |
| BS 4574-1970 |
用 K和N 墨水測定紙和紙板的吸墨性推薦標準 |
(Recommendation for the determination of the ink absorbency of paper and board by use of K & N ink) |
| BS 4575-3-1988 |
液力傳動和控制系統.第3部分:液壓和氣液動力系統的技術規范、設計、結構、交付使用和安全應用實用規程 |
(Fluid power transmission and control systems - Code of practice for the technical specification, design, construction, commissioning and safe application of hydraulic and pneumatic fluid power systems) |
| BS 4577-1970 |
電阻焊電極和輔助設備用材料規范 |
(Specification for materials for resistance welding electrodes and ancillary equipment) |
| BS 4578-1970 |
幼兒用枕頭的硬度和透氣性試驗方法規范 |
(Specification for methods of test for hardness of, and for air flow through, infants’ pillows) |
| BS 4579-2-1973 |
電纜和電線連接器中機械和壓合接頭性能規范.第2部分:鎳、鐵及鍍銅導線的壓合接頭 |
(Specification for performance of mechanical and compression joints in electric cable and wire connectors - Compression joints in nickel, iron and plated copper conductors) |
| BS 4581-2-1984 |
磨床上安裝砂輪用法蘭.76.2mm以下孔徑砂輪用法蘭的尺寸和材料規范 |
(Flanges for mounting grinding wheels on grinding machine tools - Specification for dimensions and materials of flanges for grinding wheels of less than 76.2 mm bore) |
| BS 4582-1-1970 |
小齒距齒輪(米制模數)規范.第1部分:漸開線直齒輪和斜齒輪 |
(Specification for fine pitch gears (metric module) - Involute spur and helical gears) |
| BS 4582-2-1978 |
小齒距齒輪(米制模數)規范.齒輪滾銑刀與刀具 |
(Specification for fine pitch gears (metric module) - Hobs and cutters) |
| BS 4583-1991 |
工業用高級乙醇的試驗方法 |
(Methods of test for higher alcohols for industrial use) |
| BS 4584-103.1-1990 |
印制電路板用覆箔板.第103部分:印制電路連接專用材料.第1節:多層印制電路板制造中用作粘結片材的半固化片規 |
(Metal-clad base materials for printed wiring boards - Special materials used in connection with printed circuits - Specification for prepreg for use as a bonding sheet material in the fabrication of m) |
| BS 4584-103.2-1990 |
印制電路板用覆箔板.第103部分:印刷電路連接專用材料.第2節:覆銅板制造用銅箔規范 |
(Metal-clad base materials for printed wiring boards - Special materials used in connection with printed circuits - Specification for copper foil for use in the manufacture of copper-clad base material) |
| BS 4584-103.3-1992 |
印制電路用基材.第3部分:印制電路連接用特殊材料.第3號規范:制造印制電路板中用的永久性聚合物表面覆蓋劑( |
(Metal-clad base materials for printed wiring boards - Special materials used in connection with printed circuits - Specification for permanent polymer coating materials (solder resist) for use in the) |
| BS 4584-13-1977 |
印制電路板用覆箔板.第13部分:硅酮玻璃布覆銅層壓板SI-GC-Cu-13 |
(Specification for metal-clad base materials for printed circuits - Silicone woven glass fabric copper-clad laminated sheet Si-GC-Cu-13) |
| BS 4584-15-1978 |
印制電路板用覆箔板.膠粘劑涂覆聚合膜片:PETP-F-15和PL-F-15 |
(Metal-clad base materials for printed wiring boards - Adhesive coated polymeric films: PETP-F-15 and PI-F-15) |
| BS 4584-5-1972 |
印制電路板用覆箔.第5部分:中等電氣質量的酚醛纖維素紙覆銅層壓板:PF-CP-Cu-5 |
(Specification for metal-clad base materials for printed circuits - Phenolic cellulose paper copper-clad laminated sheet of medium electrical quality: PF-CP-Cu-5) |
| BS 4584-6-1972 |
印制電路板用覆箔板.第6部分:中等電氣質量的阻燃級酚醛纖維素紙覆銅層壓板:PF-CP-Cu-6 |
(Specification for metal-clad base materials for printed circuits - Phenolic cellulose paper copper-clad laminated sheet of medium electrical quality, flame retardant grade: PF-CP-Cu-6) |
| BS 4585-1-1983 |
香料和調味品的試驗方法.第1部分:雜質的測定 |
(Methods of test for spices and condiments - Determination of extraneous matter) |
| BS 4585-11-1983 |
香料和調味品的試驗方法.第11部分:脫水大蒜中揮發性有機硫化合物的測定 |
(Methods of test for spices and condiments - Determination of volatile organic sulphur compounds in dehydrated garlic) |
| BS 4585-12-1983 |
香料和調味品的試驗方法.第12部分:胡椒的胡椒堿含量的測定 |
(Methods of test for spices and condiments - Determination of piperine content of pepper) |
| BS 4585-13-1983 |
香料和調味品的試驗方法.第13部分:姜黃著色力的測定 |
(Methods of test for spices and condiments - Determination of colouring power of turmeric) |
| BS 4585-14-1983 |
香料和調味品的試驗方法.第14部分:污物的測定 |
(Methods of test for spices and condiments - Determination of filth) |
| BS 4585-15-1985 |
香料和調味品的試驗方法.第15部分:揮發油含量的測定 |
(Methods of test for spices and condiments - Determination of volatile oil content) |
| BS 4585-16-1990 |
香料和調味品的試驗方法.第16部分:辣椒粉全天然著色物質含量的測定 |
(Methods of test for spices and condiments - Determination of total natural colouring matter content of ground (powdered) paprika) |
| BS 4585-18-1996 |
香料及調味品的試驗方法.番椒和辣椒味松脂中辣椒素總含量的測定(高性能液相色譜法) |
(Methods of test for spices and condiments - Determination of total capsaicinoid content of chillies and chilli oleoresins (high-performance liquid chromatographic method)) |
| BS 4585-2-1982 |
香料和調味品的試驗方法.第2部分:水份含量的測定(霧沫法) |
(Methods of test for spices and condiments - Determination of moisture content (entrainment method)) |
| BS 4585-3-1998 |
香料和調料的試驗方法.總灰分的測定 |
(Methods of test for spices and condiments - Determination of total ash) |
| BS 4585-4-1988 |
香料和調味品的試驗方法.第4部分:醇溶萃取物的測定 |
(Methods of test for spices and condiments - Determination of alcohol-soluble extract) |
| BS 4585-6-1992 |
香料和調味品的試驗方法.第6部分:非揮發性乙醚萃取物的測定 |
(Methods of test for spices and condiments - Determination of non-volatile ether extract) |
| BS 4585-7-1989 |
香料和調味品的試驗方法.第7部分:番椒的斯科爾指數的測定 |
(Methods of test for spices and condiments - Determination of Scoville index of chillies) |
| BS 4585-8-1977 |
香料和調味品的試驗方法.第8部分:研磨細度等級的測定－手工篩分法(比較法) |
(Methods of test for spices and condiments - Determination of degree of fineness of grinding - hand sieving method (reference method)) |
| BS 4585-9-1998 |
香料和調味品的試驗方法.酸溶灰分的測定 |
(Methods of test for spices and condiments - Determination of acid-insoluble ash) |
| BS 4588-1970 |
油印機重合測定的試驗方法 |
(Methods of test for determining the registration obtained on duplicating machines) |
| BS 459-1988 |
外用木制拼板門扇規范 |
(Specification for matchboarded wooden door leaves for external use) |
| BS 4591-1990 |
有機液體(石油產品除外)蒸餾特性的測定方法 |
(Method for determination of distillation characteristics of organic liquids (other than petroleum products)) |
| BS 46-1-1958 |
鍵和鍵槽及錐形銷.鍵和鍵槽規范 |
Keys and keyways and taper pins - Specification - Keys and keyways |
| BS 46-3-1951 |
鍵和鍵槽及錐形銷.第3部分:一般工程用實心和錐形開尾銷規范 |
(Keys and keyways and taper pins - Specification for solid and split taper pins for general engineering purposes) |
| BS 460-2002 |
鑄鐵雨水管件規范 |
(Cast iron rainwater goods - Specification) |
| BS 4601-1970 |
塑料材料的鎳鉻電鍍層規范 |
(Specification for electroplated coatings of nickel plus chromium on plastics materials) |
| BS 4602-1977 |
玻璃容器及精整規范中米制單位的應用規范 |
(Specification for the use of metric units in specifications for glass containers and finishes) |
| BS 4603-1970 |
化學產品燃燒殘余物或灰分的測定方法 |
(Method for determination of residue on ignition or ash of chemical products) |
| BS 4604-1-1970 |
結構鋼制構件中高強度摩擦緊固螺栓的應用規范,米制系列.第1部分:普通螺拴 |
Specification for the use of high strength friction grip bolts in structural steelwork - Metric series - General grade |
| BS 4604-2-1970 |
結構鋼制構件中高強度摩擦緊固螺栓的應用規范,米制系列.第2部分:高級螺拴(標準桿) |
(Specification for the use of high strength friction grip bolts in structural steelwork - Metric series - Higher grade (parallel shank)) |
| BS 4607-1-1984 |
電氣裝置用非金屬導管及配件規范.絕緣材料配件和件規范 |
(Non-metallic conduits and fittings for electrical installations - Specification for fittings and components of insulating material) |
| BS 4607-3-1971 |
電氣裝置用非金屬導管及配件規范.自熄性塑料制普通和增強的可彎波紋導管 |
Non-metallic conduits and fittings for electrical installations - Pliable corrugated, plain and reinforced conduits of self-extinguishing plastics material |
| BS 4607-5-1982 |
電氣裝置用非金屬導管及配件規范.第5部分:絕緣材料制剛性導管、配件和件規范 |
Non-metallic conduits and fittings for electrical installations - Specification for rigid conduits, fittings and components of insulating material |
| BS 4611-1989 |
聚烯烴扁絲的試驗方法 |
Methods of test for polyolefin tape yarns |
| BS 4617-1983 |
液壓傳動用泵和電動機性能的測定方法 |
Methods for determining the performance of pumps and motors for hydraulic fluid power transmission |
| BS 4618 Introduction-1970 |
塑料設計數據表示方法推薦標準.導論 |
Recommendations for the presentation of plastics design data - General introduction |
| BS 4618-1.1-1970 |
塑料設計數據表示方法推薦標準.第1部分:機械特性.第1節:蠕變 |
Recommendations for the presentation of plastics design data - Mechanical properties - Creep |
| BS 4618-1.1.1-1970 |
塑料設計數據表示方法推薦標準.第1部分:機械性能.第1節:蠕變.第1小節:單軸拉伸或壓縮中的蠕變(專指固體塑料 |
(Recommendations for the presentation of plastics design data - Mechanical properties - Creep in uniaxial tension or compression (with particular reference to solid plastics)) |
| BS 4618-1.1.2-1976 |
塑料設計數據表示方法推薦標準.機械特性.蠕變.紙應變撓曲蠕變 |
Recommendations for the presentation of plastics design data - Mechanical properties - Creep in flexure at low strains |
| BS 4618-1.1.3-1974 |
塑料設計數據表示方法推薦標準.機械特性.蠕變.蠕變橫向收縮比(泊松比) |
Recommendations for the presentation of plastics design data - Mechanical properties - Creep lateral contraction ratio (Poisson`s ratio) |
| BS 4618-1.2-1972 |
塑料設計數據表示方法推薦標準.第1部分:機械特性.第2節:沖擊性能 |
Recommendations for the presentation of plastics design data - Mechanical properties - Impact behaviour |
| BS 4618-1.3-1975 |
塑料設計數據表示方法推薦標準.機械特性.強度 |
Recommendations for the presentation of plastics design data - Mechanical properties - Strength |
| BS 4618-1.3.1-1975 |
塑料設計數據表示方法推薦標準.第1部分:機械特性.第3.1節:靜態疲勞損壞 |
Recommendations for the presentation of plastics design data - Mechanical properties - Static fatigue failure |
| BS 4618-1.3.3-1976 |
塑料設計數據表示方法推薦標準.機械特性.強度環境應力破裂 |
Recommendations for the presentation of plastics design data - Mechanical properties - Environmental stress cracking |
| BS 4618-2.1-1970 |
塑料設計數據表示方法推薦標準.第2部分:電氣特性.第1節:介電常數 |
(Recommendations for the presentation of plastics design data - Electrical properties - Permittivity) |
| BS 4618-2.2-1970 |
塑料設計數據表示方法推薦標準.第2部分:電氣特性.第2節:損耗角正切 |
Recommendations for the presentation of plastics design data - Electrical properties - Loss tangent |
| BS 4618-2.3-1975 |
塑料設計數據表示方法推薦標準.第2部分:電氣特性.第3節:體積電阻率 |
(Recommendations for the presentation of plastics design data - Electrical properties - Volume resistivity) |
| BS 4618-2.4-1975 |
塑料設計數據表示方法推薦標準.電氣特性.表面電阻率 |
(Recommendations for the presentation of plastics design data - Electrical properties - Surface resistivity) |
| BS 4618-3.1-1970 |
塑料設計數據表示方法推薦標準.第3部分:熱特性.第1節:線性熱膨脹 |
(Recommendations for the presentation of plastics design data - Thermal properties - Linear thermal expansion) |
| BS 4618-3.2-1973 |
塑料設計數據表示方法推薦標準.第3部分:熱特性.第2節:熱函數 |
(Recommendations for the presentation of plastics design data - Thermal properties - Heat content) |
| BS 4618-3.3-1973 |
塑料設計數據表示方法推薦標準.熱特性.導熱性 |
(Recommendations for the presentation of plastics design data - Thermal properties - Thermal conductivity) |
| BS 4618-4.1-1972 |
塑料設計數據表示方法推薦標準.第4部分:環境和化學效應.第1節:耐液體化學性 |
(Recommendations for the presentation of plastics design data - Environmental and chemical effects - Chemical resistance to liquids) |
| BS 4618-4.2-1972 |
塑料設計數據表示方法推薦標準.第4部分:環境和化學效應.第2節:耐自然老化性 |
(Recommendations for the presentation of plastics design data - Environmental and chemical effects - Resistance to natural weathering) |
| BS 4618-4.3-1974 |
塑料設計數據表示方法推薦標準.第4部分:環境和化學效應.第3節:耐光照變色性 |
(Recommendations for the presentation of plastics design data - Environmental and chemical effects - Resistance to colour change produced by exposure to light) |
| BS 4618-4.4-1973 |
塑料設計數據表示方法推薦標準.第4部分:環境和化學效應.第4節:海上曝露的影響 |
(Recommendations for the presentation of plastics design data - Environmental and chemical effects - The effect of marine exposure) |
| BS 4618-4.5-1974 |
塑料設計數據表示方法推薦標準.環境和化學效應.土埋及生物侵襲對塑料的影響 |
(Recommendations for the presentation of plastics design data - Environmental and chemical effects - The effect on plastics of soil burial and biological attack) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com