標準號 |
中文名稱 |
英文名稱 |
| BS 6564-3-1990 |
聚四氟乙烯(PTFE)材料和制品.第3部分:填充聚四氟乙烯的E類玻璃纖維規范 |
(Polytetrafluoroethylene (PTFE) materials and products - Specification for E glass fibre filled polytetrafluoroethylene) |
| BS 6570-1986 |
鋼絲繩的選擇、保養和維修實用規程 |
(Code of practice for the selection, care and maintenance of steel wire ropes) |
| BS 6571-1-1989 |
停車場控制設備.第1部分:投放硬幣控制的停車計時表的規范 |
(Vehicle parking control equipment - Specification for coin operated clockwork parking meters) |
| BS 6571-2-1989 |
停車場控制設備.第2部分:電動停車計時器規范 |
(Vehicle parking control equipment - Specification for electrically powered parking meters) |
| BS 6571-4-1989 |
停車場控制設備.第4部分:柵欄型停車場控制設備規范 |
(Vehicle parking control equipment - Specification for barrier type parking control equipment) |
| BS 6571-6-1996 |
停車場控制設備.第6部分:結算停車費控制設備規范 |
(Vehicle parking control equipment - Specification for pay-on-foot parking control equipment) |
| BS 6571-7-1997 |
停車場控制設備.第6部分:停車牌規范 |
(Vehicle parking control equipment - Specification for parking discs) |
| BS 6571-8-1997 |
停車控制設備.預購停車憑單的規范 |
(Vehicle parking control equipment - Specification for pre-purchased parking vouchers) |
| BS 6574-1985 |
土方機械操作和保養技術培訓指南 |
(Guide to training of mechanics concerned with the operation and maintenance of earth-moving machinery) |
| BS 6576-1985 |
化學防潮層安裝實用規程 |
(Code of practice for installation of chemical damp-proof courses) |
| BS 658-1990 |
餾程測定用器具(包括燒瓶和受液器)規范 |
(Specification for apparatus for the determination of distillation range (including flasks and receivers)) |
| BS 6580-1992 |
防腐蝕發動機冷卻液防凍添加劑(防凍劑)規范 |
(Specification for corrosion inhibiting, engine coolant concentrate (’antifreeze’)) |
| BS 6582-2000 |
連續熱鍍鉛合金(鉛錫合金)鍍層的冷軋扁平碳鋼制品 |
(Continuously hot-dip lead alloy (terne) coated cold reduced carbon steel flat rolled products) |
| BS 6583-1985 |
用于測定中央通風裝置中風機室額定功率的體積測量方法(包括調定額定值的指南) |
(Methods for volumetric testing for rating of fan sections in central station air handling units (including guidance on rating)) |
| BS 6584-1985 |
手洗餐具用洗滌劑性能的對比試驗導則 |
(Guide for comparative testing of performance of detergents for hand dishwashing) |
| BS 6585-1985 |
家用機洗餐具用洗滌劑性能的對比試驗導則 |
(Guide for comparative testing of performance of detergents for domestic machine dishwashing) |
| BS 6586-1-1993 |
用壓注法制作的聚氨酯硬泡沫塑料.第1部分:運輸集裝箱和車身用隔熱板的聚氨酯硬泡沫塑料規范 |
(Rigid polyurethane (PUR) foam produced by the press injection method - Specification for PUR foam for insulated panels for transport containers and insulated vehicles bodies) |
| BS 6587-1985 |
緊固件的驗收檢驗方法 |
(Method of acceptance inspection for fasteners) |
| BS 6590-1985 |
開式機械壓力機的額定功率和尺寸規范 |
(Specification for capacity ratings and dimensions of power presses, mechanical open front type) |
| BS 6591-1985 |
礦用鏈式輸送機的刮土板規范 |
(Specification for scraper bars for chain conveyors for mining) |
| BS 6592-1985 |
礦用鏈式輸送機從動鏈輪組件規范 |
(Specification for drive sprocket assemblies for chain conveyors for mining) |
| BS 6593-1985 |
紡織和鋼鐵業傳送機的捻合加強傳送帶的現場非機械連接接頭實用規程 |
(Code of practice for on-site non-mechanical jointing of plied textile and steel reinforced conveyor belting) |
| BS 6599-1985 |
鐵礦石顆粒壓碎強度的測定方法 |
(Method for determination of crushing strength of iron ore pellets) |
| BS 6600-1-1987 |
無線電通信與電子設備用變壓器與電感器的外形尺寸.第1部分:使用YEI-1疊片的變壓器和電感器的外形尺寸規格 |
(Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Specification for the outline dimensions of transformers and inductors using YEI-1 laminations) |
| BS 6600-10-1985 |
無線電通信與電子設備用變壓器與電感器的外形尺寸.第10部分:使用C-磁芯Q范圍的變壓器與電感器的外形尺寸規 |
(Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Specification for the outline dimensions of transformers and inductors using the Q range of C-c) |
| BS 6601-1985 |
信匯付款單規范 |
(Specification for mail payment orders) |
| BS 6604-1985 |
起動器蓄電池安全操作實用指南 |
(Code of practice for safe operation of starter batteries) |
| BS 6605-1990 |
十字槽頭螺釘規范 |
(Specification for cross recesses for screws) |
| BS 6606-1987 |
榨油油渣的取樣方法 |
(Methods for sampling oilseed residues) |
| BS 6607-1-1985 |
自動刀具更換用7/24度錐形刀桿.第1部分:40、45和50號錐桿規范 |
(Tool shanks with 7/24 taper for automatic tool changers - Specification for shanks Nos - 40, 45, and 50) |
| BS 6607-2-1985 |
自動刀具更換用7/24錐形刀桿.第2部分:40、45和50號錐桿用定位球形柄規范 |
(Tool shanks with 7/24 taper for automatic tool changers - Specification for retention knobs for shanks Nos - 40, 45 and 50) |
| BS 6607-3-1993 |
自動刀具更換用7/24錐形刀桿.第3部分:軸頭用錐桿規范 |
(Tool shanks with 7/24 taper for automatic tool changers - Specification for tapers for spindle noses) |
| BS 6607-4-1994 |
帶7/24錐形自動刀具變換器的刀具柄.加工中心軸托架的正面功能尺寸的規格 |
(Tool shanks with 7/24 taper for automatic tool changers - Specification for functional dimensions of front faces of spindle holders for machine centres) |
| BS 6608-1985 |
軟墊家具用牛皮革規范 |
(Specification for cattle hide leathers for upholstered furniture) |
| BS 6610-1996 |
火山灰和粉狀燃料灰分水泥規范 |
(Specification for Pozzolanic pulverized-fuel ash cement) |
| BS 6611-1985 |
固定建筑、特別是樓房與沿海建筑中居民對低頻水平振動(0.063Hz-1Hz)響應的評定指南 |
(Guide to evaluation of the response of occupants of fixed structures, especially buildings and offshore structures, to low-frequency horizontal motion (0.063 Hz to 1 Hz)) |
| BS 6612-1985 |
漸縮式彈力襪規范 |
(Specification for graduated compression hosiery) |
| BS 6613-1985 |
規定彈性聯軸器特性的方法 |
(Methods for specifying characteristics of resilient shaft couplings) |
| BS 6615-1996 |
金屬和金屬合金鑄件的尺寸公差規范 |
(Specification for dimensional tolerances for metal and metal alloy castings) |
| BS 6616-1986 |
光學文字識讀(OCR)用紙和印刷規范 |
(Specification for paper and print for optical character recognition (OCR)) |
| BS 662-1-1979 |
工業用二硫化碳.第1部分:規范 |
(Carbon disulphide for industrial use - Specification) |
| BS 662-2-1978 |
工業用二硫化碳.第2部分:取樣和試驗方法 |
(Carbon disulphide for industrial use - Sampling and methods of test) |
| BS 662-3-1979 |
工業用二硫化碳.第3部分:補充的試驗方法 |
(Carbon disulphide for industrial use - Additional methods of test) |
| BS 6620-1-1992 |
工業板篩.第1部分:厚度為3mm和以上的篩子使用指南 |
(Industrial plate screens - Guide for screens of thickness 3 mm and above) |
| BS 6620-2-1992 |
工業用板式篩網.3mm厚度以下的篩網指南 |
(Industrial plate screens - Guide for screens of thickness below 3 mm) |
| BS 6622-1999 |
額定電壓范圍為(3800~6600)V和(19000~33000)V,具有擠壓交叉連接的聚乙烯或乙烯丙烯橡膠絕緣電纜規范 |
(Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV) |
| BS 6626-1985 |
電壓為1kV以上至36kV(含)的電氣開關設備和控制裝置的維護實用規程 |
(Code of practice for maintenance of electrical switchgear and controlgear for voltages above l kV and up to and including 36 kV) |
| BS 6627-1985 |
專著和連續出版物縮微平片標題表示法推薦規范 |
(Recommendations for presentation of headers for microfiche of monographs and serials) |
| BS 6628-1985 |
醫療診斷用旋轉陽極X 射線管的最大對稱輻射區域的測定方法 |
(Method for determination of the maximum symmetrical radiation field from a rotating anode X-ray tube for medical diagnosis) |
| BS 6630-1985 |
用薄層色譜法識別橡膠和橡膠制品中抗降解劑的方法 |
(Method for identification of antidegradants in rubber and rubber products by thin layer chromatography) |
| BS 6631-1985 |
轉盤式鉆機和振動機用橡膠軟管及其配件規范 |
(Specification for rubber hoses and hose assemblies for rotary drilling and vibration applications) |
| BS 6632-1985 |
船舶振動數據的測量和報告方法 |
(Method for measurement and reporting of shipboard vibration data) |
| BS 6633-1985 |
船舶結構和設備局部振動數據的測量和報告方法 |
(Method for measurement and reporting of local vibration data of ship structures and equipment) |
| BS 6635-2003 |
木制鞍馬座架的生產規范 |
(Manufacture of saddle trees made from wood - Specification) |
| BS 6638-2-1990 |
數據終端設備(DTE)/(DCE)接口傳輸信號質量指南.第2部分:同步傳輸 |
(Guide to transmission signal quality at DTE/DCE interfaces - Synchronous transmission) |
| BS 6641-1985 |
放射醫學術語詞匯 |
(Glossary of medical radiology terms) |
| BS 6642-1985 |
一次使用的聚乙烯塑料垃圾袋規范 |
(Specification for disposable plastics refuse sacks made from polyethylene) |
| BS 6643-1-1985 |
滅火器(根據BS 5423便攜式滅火器制造的)重新裝填.第1部分:工序和材料規范 |
(Recharging fire extinguishers (manufactured to BS 5423 ’specification for portable fire extinguishers’) - Specification for procedure and materials) |
| BS 6643-2-1985 |
滅火器(根據BS 5423便攜式滅火器制造的)重新裝填.第2部分:干粉滅火劑的重新裝填規范 |
(Recharging fire extinguishers (manufactured to BS 5423 ’specification for portable fire extinguishers’) - Specification for powder refill charges) |
| BS 6644-1991 |
額定輸入功率在60KW與2MW之間(2類和3類煤氣)燃氣熱水鍋爐安裝規范 |
(Specification for installation of gas-fired hot water boilers of rated inputs between 60 kW and 2 MW (2nd and 3rd family gases)) |
| BS 6644-2005 |
額定輸入功率在70 kW(凈功率)和1.8 MW(凈功率)之間(2類和3類家用煤氣)的燃氣熱水鍋爐的安裝規范 |
|
| BS 6645-1985 |
亞麻布料堿溶性的測定方法 |
(Method for determination of alkali solubility of flax materials) |
| BS 6646-1985 |
織物灰分測定方法 |
(Method for determination of ash of textiles) |
| BS 6647-1985 |
脈沖試驗用示波器和峰值伏特計指南 |
(Guide to oscilloscopes and peak voltmeters for impulse tests) |
| BS 6648-1986 |
順序測定金屬含量用的織物濕灰化方法 |
(Methods for wet ashing of textile materials for subsequent determination of metal content) |
| BS 6649-1985 |
粘土和硅酸鈣標準磚規范 |
(Specification for clay and calcium silicate modular bricks) |
| BS 6651-1999 |
建筑物避雷裝置的實施規范 |
(Code of practice for protection of structures against lightning) |
| BS 6653-1985 |
邏輯分析儀的特性表達方法 |
(Method for expression of the properties of logic analyzers) |
| BS 6654-1985 |
鋪地織物電阻率的測定方法 |
(Method for determination of the electrical resistivity of textile floor coverings) |
| BS 6655-1986 |
用于保存聽力的純聲空氣傳導臨界測聽術規范 |
(Specification for pure tone air conduction threshold audiometry for hearing conservation purposes) |
| BS 6656-2002 |
由射頻輻射引起的易燃空氣意外著火的評定指南 |
(Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation - Guide) |
| BS 6657-2002 |
由射頻輻射引起的電起爆器件的意外著火的評定指南 |
(Assessment of inadvertent initiation of bridge wire electro-explosive devices by radio-frequency radiation - Guide) |
| BS 6658-1985 |
車輛司機用安全帽規范 |
(Specification for protective helmets for vehicle users) |
| BS 6660-1985 |
顯微照相裝置安裝與維護指南 |
(Guide to setting up and maintaining micrographics units) |
| BS 6662-1985 |
低壓源和信號線路上短時間瞬態測量方法指南 |
(Guide to methods of measurement of short duration transients on low voltage power and signal lines) |
| BS 6663-1986 |
織物尼龍線卷曲強度的測定方法 |
(Methods for determination of crimp rigidity of textured nylon yarns) |
| BS 6664-4-1992 |
石油和石油產品閃點.第4部分:閃點的測定方法(快速平衡法) |
(Flashpoint of petroleum and related products - Method for determination of flashpoint (rapid equilibrium method)) |
| BS 6668-1-1986 |
紡織提升吊鏈.第1部分:一般技術服務用天然和人造纖維繩索制的提升鏈規范 |
(Textile lifting slings - Specification for lifting slings for general service made from certain natural and man-made fibre ropes) |
| BS 6669-1-1986 |
銀和銀合金電鍍層的試驗方法.第1部分:鍍層厚度的測量 |
(Methods of test for electroplated silver and silver alloy coatings - Determination of coating thickness) |
| BS 6669-2-1986 |
銀和銀合金電鍍層的試驗方法.第2部分:粘滯試驗 |
(Methods of test for electroplated silver and silver alloy coatings - Adhesion tests) |
| BS 6669-3-1989 |
銀和銀合金電鍍層的試驗方法.第3部分:殘留鹽的檢測 |
(Methods of test for electroplated silver and silver alloy coatings - Detection of residual salts) |
| BS 667-1996 |
光度計規范 |
(Specification for illuminance meters) |
| BS 6670-1-1986 |
金和金合金電鍍層的試驗方法.第1部分:鍍層厚度的測量 |
(Methods of test for electroplated gold and gold alloy coatings - Determination of coating thickness) |
| BS 6670-4-1986 |
金和金合金電鍍層的試驗方法.第4部分:金含量的測定 |
(Methods of test for electroplated gold and gold alloy coatings - Determination of gold content) |
| BS 6670-5-1986 |
金和金合金電鍍層的試驗方法.第5部分:粘滯試驗 |
(Methods of test for electroplated gold and gold alloy coatings - Adhesion tests) |
| BS 6674-1985 |
一次性使用的微量吸移管規范 |
(Specification for disposable micropipettes) |
| BS 6675-1986 |
供水用(銅合金)輔助工作閥 |
(Specification for servicing valves (copper alloy) for water services) |
| BS 6680-1985 |
煤礦和其他沼氣敏感礦用柴油機防爆設備規范 |
(Specification for flameproof equipment for diesel engines for use in coal mines and other mines susceptible to firedamp) |
| BS 6683-1985 |
閥門的安裝和使用指南 |
(Guide to installation and use of valves) |
| BS 6684-1989 |
嬰兒在折疊式輕便推車內、高椅上和步行時用以約束其活動的安全繩(包括可拆卸活動把手)的規范. |
(Specification for safety harnesses (including detachable walking reins) for restraining children when in perambulators (baby carriages), pushchairs and high chairs and when walking) |
| BS 669-1-1990 |
燃氣灶具用軟管.接頭配件和管座.第1部分:采用第1、2類燃氣的家用灶具用帶繞金屬軟管、封蓋、接頭配件和管座 |
(Flexible hoses, end fittings and sockets for gas burning appliances - Specification for strip-wound metallic flexible hoses, covers, end fittings and sockets for domestic appliances burning 1st and 2n) |
| BS 669-2-1997 |
燃氣灶具用軟管、接頭配件和管座.第2部分:采用第1、2類燃氣的家用灶具用波紋金屬軟管、封蓋、接頭配件和管 |
(Flexible hoses, end fittings and sockets for gas burning appliances - Specification for corrugated metallic flexible hoses, covers, end fittings and sockets for catering appliances burning 1st, 2nd an) |
| BS 6696-1986 |
測定容量用玻璃器皿的使用方法和容積試驗方法 |
(Methods for use and testing of capacity of volumetric glassware) |
| BS 6699-1992 |
用于硅酸鹽水泥磨碎粒狀高爐爐渣規范 |
(Specification for ground granulated blastfurnace slag for use with Portland cement) |
| BS 67-1987 |
天花板燈線盒規范 |
(Specification for ceiling roses) |
| BS 6700-1997 |
建筑物及其庭園中家用供水裝置的設計、安裝、試驗和維護規范 |
(Specification for design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages) |
| BS 6701-1994 |
與電信系統連接儀表的安裝實施規則 |
(Code of practice for installation of apparatus intended for connection to certain telecommunication systems) |
| BS 6701-2004 |
電信設備和電信電纜敷設.安裝、運行和維護規范 |
|
| BS 6704-1996 |
煤礦中安全電氣設備的選擇、安裝和維修實用規程 |
(Code of practice for selection, installation and maintenance of intrinsically safe electrical equipment in coal mines) |
| BS 6705-1987 |
煤礦中安全電路用的電氣測量儀器規范 |
(Specification for electrical measuring instruments for use on intrinsically safe circuits in coal mines) |
| BS 6706-1986 |
一次性使用的血清玻璃吸移管規范 |
(Specification for disposable glass serological pipettes) |
| BS 6708-1998 |
用于礦井和露天開采的軟電纜 |
(Flexible cables for use at mines and quarries) |
| BS 6709-1986 |
在有沼氣危險的礦井中根據兩個以上標準制造的電器的互連規范 |
(Specification for interconnection of electrical apparatus, constructed to two or more British Standards, for use in mines susceptible to firedamp) |
| BS 6710-1987 |
鏈輪齒成形刀具的尺寸規范 |
(Specification for dimensions of chain wheel tooth forming tools) |
| BS 6711-1-1986 |
基本由玻璃、瓷或透明石英制實驗室器皿詞匯.第1部分:器皿項目用名稱 |
(Vocabulary relating to laboratory apparatus made essentially from glass, porcelain or vitreous silica - Names for items of apparatus) |
| BS 6712-1-1995 |
紙、紙板受潮膨脹度的測定.第1部分:最大相對濕度在68%以下的受潮膨脹度的測定方法 |
(Measurement of hygroexpansivity of paper and board - Method for the measurement of hygroexpansivity up to a maximum relative humidity of 68%) |
| BS 6712-2-1991 |
紙和紙板受潮膨脹度的測定.第2部分:最大相對濕度達到86%時受潮膨脹度的測定方法 |
(Measurement of hygroexpansivity of paper and board - Method for measurement of hygroexpansivity up to a maximum relative humidity of 86%) |
| BS 6713-1-1986 |
防爆系統.第1部分:空氣中易爆粉塵爆炸指數的測定方法 |
(Explosion protection systems - Method for determination of explosion indices of combustible dusts in air) |
| BS 6713-2-1986 |
防爆系統.第2部分:空氣中易爆氣體爆炸指數的測定方法 |
(Explosion protection systems - Method for determination of explosion indices of combustible gases in air) |
| BS 6713-3-1986 |
防爆系統.第3部分:除粉塵/空氣和氣體空氣混合物外燃油/空氣混合物爆炸指數的測定方法 |
(Explosion protection systems - Method for determination of explosion indices of fuel/air mixtures other than dust/air and gas/air mixtures) |
| BS 6713-4-1986 |
防爆系統.第4部分:排爆系統效力的測定方法 |
(Explosion protection systems - Method for determination of efficacy of explosion suppression systems) |
| BS 6715-1991 |
油鞣革規范 |
(Specification for chamois leather) |
| BS 6716-1986 |
橡膠性能和類型指南 |
(Guide to properties and types of rubber) |
| BS 6717-2001 |
預制非加筋混凝土鋪路磚.要求和試驗方法 |
(Precast, unreinforced concrete paving blocks - Requirements and test methods) |
| BS 6719-1986 |
對以計算機系統為基礎的系統的使用者規定要求指南 |
(Guide to specifying user requirements for a computer-based system) |
| BS 6720-1986 |
包裝上區分運輸信息的標記規范 |
(Specification for marking transit information on packages for distribution) |
| BS 6721-10-1989 |
銅及銅合金的取樣與分析.第10部分:用滴定法對銅合金中鉻的測定方法 |
(Sampling and analysis of copper and copper alloys - Method for determination of chromium in copper alloys: titrimetric method) |
| BS 6721-11-1989 |
銅及銅合金的取樣與分析.第11部分:用燃燒滴定法對銅及銅合金中硫的測定方法 |
(Sampling and analysis of copper and copper alloys - Method for determination of sulphur in copper and copper alloys: combustion titrimetric method) |
| BS 6721-4-1986 |
銅及銅合金的取樣與分析.第4部分:用火焰原子吸收分光光度法對銅與銅合金中鉻的測定方法 |
(Sampling and analysis of copper and copper alloys - Method for determination of chromium in copper and copper alloys by flame atomic absorption spectrophotometry) |
| BS 6721-5-1986 |
銅及銅合金的取樣與分析.第5部分:用火焰原子吸收分光光度法對銅與銅合金中鋅的測定方法 |
(Sampling and analysis of copper and copper alloys - Method for determination of zinc in copper and copper alloys by flame atomic absorption spectrophotometry) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com