標準號 |
中文名稱 |
英文名稱 |
| BS 6902-1-1990 |
心臟起搏器.第1部分:可植入心臟起搏器規范 |
(Cardiac pacemakers - Specification for implantable cardiac pacemakers) |
| BS 6904-1987 |
額定電壓不低于72.5kV的氣體絕緣金屬密封式開關裝置用電纜連接指南 |
(Guide for cable connections for gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above) |
| BS 6905-1987 |
用改進的凱爾西-賽克斯試驗對醫用消毒劑濃度的估算方法 |
(Method for estimation of concentration of disinfectants used in ’dirty’ conditions in hospitals by the modified Kelsey-Sykes test) |
| BS 6906-2-1989 |
土工織物試驗方法.第2部分:干篩分表觀篩孔尺寸的測定 |
(Methods of test for geotextiles - Determination of the apparent pore size distribution by dry sieving) |
| BS 6906-3-1989 |
土工織物試驗方法.第3部分:恒定水壓下垂直于土工織物平面的水流量的測定 |
(Methods of test for geotextiles - Determination of water flow normal to the plane of the geotextile under a constant head) |
| BS 6906-5-1991 |
土工織物的試驗方法.第5部分:蠕變的測定 |
(Methods of test for geotextiles - Determination of creep) |
| BS 6906-7-1990 |
土工織物的試驗方法.第7部分:平面水流量的測定 |
(Methods of test for geotextiles - Determination of in-plane waterflow) |
| BS 6906-8-1991 |
土工織物的試驗方法.第8部分:用直接剪切法測定沙子用土工織物的摩擦特性 |
(Methods of test for geotextiles - Determination of sand-geotextile frictional behaviour by direct shear) |
| BS 6907-1-1988 |
露天礦和采石礦的電氣裝置.第1部分:術語詞匯 |
(Electrical installations for open-cast mines and quarries - Glossary) |
| BS 6907-2-1988 |
露天礦和采石礦的電氣裝置.第2部分:觸電防護一般推薦規范 |
(Electrical installations for open-cast mines and quarries - General recommendations for protection against direct contact and electric shock) |
| BS 6907-3-1988 |
露天礦和采石礦的電氣裝置.第3部分:設備及輔助設備推薦規范 |
(Electrical installations for open-cast mines and quarries - Recommendations for equipment and ancillaries) |
| BS 6907-4-1988 |
露天礦和采石礦的電氣裝置.第4部分:開采、疊片和處理機械設備、泵和低信號級及通信系統 |
(Electrical installations for open-cast mines and quarries - Recommendations for winning, stacking and processing machinery, pumps and low signal level and communications systems) |
| BS 6907-5-1988 |
露天礦和采石礦的電氣裝置.第5部分:操作推薦規范 |
(Electrical installations for open-cast mines and quarries - Recommendations for operation) |
| BS 6909-1988 |
空氣中懸浮的干燥狀態纖維質點脫落趨勢劃階段與計算方法 |
(Method for generation and counting of the airborne linting propensity of fabrics in the dry state) |
| BS 6910-1-1988 |
電壓小于和等于交流1000V 和直流1500V 的,冷澆注樹脂復合物和熱裝電纜接頭.第1部分:材料規格 |
(Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Specification for materials) |
| BS 6910-2-1989 |
電壓范圍在1000Va.c.和1500Vd.c.內的低溫澆注樹脂復合物和熱套裝電纜接頭.第2部分:定位安裝操作規程 |
(Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Code of practice for on-site installation) |
| BS 6911-1-1988 |
土方機械試驗.第1部分:履帶式拖拉機和輪式拖拉機推土刮板的容積額定值的測定方法 |
(Testing earth-moving machinery - Method for determination of volumetric rating of crawler and wheel tractor dozer blades) |
| BS 6911-10-1996 |
土方機械的檢驗.第10部分:機械懸掛補償設備性能要求 |
(Testing earth-moving machinery - Machine-mounted retrieval device - Performance requirements) |
| BS 6911-11-1997 |
土方機械.液壓挖掘機鏟斗和反向鏟裝載鏟斗的額定容量測定方法 |
(Testing earth-moving machinery - Method for the determination of volumetric ratings for hydraulic excavator buckets and backhoe loader buckets) |
| BS 6911-12-1998 |
土方機械試驗.輪式機械轉彎尺寸的測定 |
(Testing earth-moving machinery - Determination of turning dimensions of wheeled machines) |
| BS 6911-13-1998 |
土方機械.整機及其設備和組件質量的測量方法 |
(Testing earth-moving machinery - Methods of measuring the masses of whole machines, their equipment and components) |
| BS 6911-14-1998 |
土方機械試驗.履帶式機械.制動系統的性能要求和試驗程序 |
(Testing earth-moving machinery - Crawler machines - Performance requirements and test procedures for braking systems) |
| BS 6911-2-1990 |
土方機械試驗.第2部分:裝載機機具強度和傾覆載荷測量 |
(Testing earth-moving machinery - Measurement of tool forces and tipping loads of loaders) |
| BS 6911-3-1990 |
土方機械試驗.第3部分:液壓挖掘機機具力的測量 |
(Testing earth-moving machinery - Measurement of tool forces of hydraulic excavators) |
| BS 6911-4-1998 |
土方機械試驗.引擎試驗條款.凈功率 |
(Testing earth-moving machinery - Engine test code - Net power) |
| BS 6911-5-1992 |
土方機械試驗.第5部分:操作者視野的測定 |
(Testing earth-moving machinery - Determination of operator’s field of view) |
| BS 6911-6-1992 |
土方機械試驗.第6部分:帶側起重臂的管道敷設機和輪式拖拉機或裝載機的提升能力評定方法 |
(Testing earth-moving machinery - Method for the evaluation of lift capacity of pipelayers and wheel tractors or loaders equipped with side boom) |
| BS 6911-7-1992 |
土方機械試驗.第7部分:測量單位和公差規范 |
(Testing earth-moving machinery - Testing of earth-moving machinery - Specification for units of measurement and tolerances) |
| BS 6911-8-1993 |
土方機械試驗.第8部分:機械液壓系統操作傾斜度極限值的測定(靜態試驗法) |
(Testing earth-moving machinery - Determination of slope limits for machine fluid systems operation (static test method)) |
| BS 6911-9-1993 |
土方機械試驗.第9部分:翻斗車和拖拉式平地機的減速器性能校驗 |
(Testing earth-moving machinery - Verification of retarder capability of dumpers and tractor-scrapers) |
| BS 6912-1-1997 |
土方機械的安全.液壓挖掘機和反鏟裝載機懸臂降低控制裝置 |
(Safety of earth-moving machinery - Specification for hydraulic excavator and backhoe loader boom lowering control device) |
| BS 6912-11-1993 |
土方機械安全.第11部分:提升臂支撐裝置的要求 |
(Safety of earth-moving machinery - Requirements for lift arm support devices) |
| BS 6912-12-1993 |
運土機械的安全.第12部分:駕駛員視野的評定 |
(Safety of earth-moving machinery - Evaluation of operator’s field of view) |
| BS 6912-13-1993 |
運土機械的安全.第13部分:駕駛員視野合格準則 |
(Safety of earth-moving machinery - Acceptance criteria for operator’s field of view) |
| BS 6912-16-1995 |
地面移動機械.翻斗車身支架和操作艙翻轉支架裝置 |
(Safety of earth-moving machinery - Specification for dumper body support and operator’s cab tilt support devices) |
| BS 6912-18-1995 |
土方機械.操作者.操作者的人體尺寸和操作者最小座艙空間.邊粗率 |
(Safety of earth-moving machinery - Specification for bluntness of edges at the operator station and in maintenance areas) |
| BS 6912-19-1996 |
土方機械安全.駕駛員座椅的尺寸和要求用規范 |
(Safety of earth-moving machinery - Specification for dimensions and requirements for operator’s seat) |
| BS 6912-1996 |
土方機械.駕駛員座椅的尺寸和要求 |
(Safety of earth-moving machinery. Specification for dimensions and requirements for operator’s seat) |
| BS 6912-2-1989 |
土方機械的安全.第2部分:履帶式和輪式裝載機運轉負荷規范 |
(Safety of earth-moving machinery - Specification for rated operating load for crawler and wheel loaders) |
| BS 6912-20-1996 |
土方機械.操作者控制裝置 |
(Safety of earth-moving machinery - Specification for operator’s controls) |
| BS 6912-21-1996 |
土方機械.照明、發信號燈和標志燈,后向反射鏡 |
(Safety of earth-moving machinery - Specification for lighting, signalling and marking lights, and reflex-reflector devices) |
| BS 6912-22.1-1996 |
土方機械安全.第22部分:操作者的密封環境.第1節:總則和定義 |
(Safety of earth-moving machinery - Operator enclosure environment - General and definitions) |
| BS 6912-22.2-1996 |
土方機械安全.第22部分:操作者的密封環境.第2節:空氣過濾器的檢驗 |
(Safety of earth-moving machinery - Operator enclosure environment - Air filter test) |
| BS 6912-22.3-1996 |
土方機械安全.第22部分:操作者的密封環境.第3節:操作者用密封駕駛室加壓試驗法 |
(Safety of earth-moving machinery - Operator enclosure environment - Operator enclosure pressurization test method) |
| BS 6912-22.4-1996 |
土方機械安全.第22部分:操作者的密封環境.第4節:操作者用密封駕駛室的通風、加熱和/或空調試驗法 |
(Safety of earth-moving machinery - Operator enclosure environment - Operator enclosure ventilation, heating and/or air-conditioning test method) |
| BS 6912-22.5-1996 |
土方機械安全.第22部分:操作者的密封環境.第5節:擋風玻璃解凍系統試驗法 |
(Safety of earth-moving machinery - Operator enclosure environment - Windscreen defrosting system test method) |
| BS 6912-22.6-1996 |
土方機械安全.第22部分:操作者的密封環境.第6節:操作者用密封駕駛室太陽能加熱效果的測定 |
(Safety of earth-moving machinery - Operator enclosure environment - Determination of the effect of solar heating on the operator enclosure) |
| BS 6912-23-1996 |
土方機械的安全.第23部分:安全信號和危險圖形符號的一般性能 |
(Safety of earth-moving machinery - Safety signs and hazard pictorials - General principles) |
| BS 6912-3-1990 |
土方機械的安全.第3部分:安裝在機器上的正、反向報警器的聲學試驗方法 |
(Safety of earth-moving machinery - Sound test method for machine-mounted forward and reverse warning alarm) |
| BS 6912-4-1991 |
土方機械的安全.第4部分:鑰匙鎖定起動系統規范 |
(Safety of earth-moving machinery - Specification for key-locked starting systems) |
| BS 6912-5-1992 |
土方機械安全.第5部分:最小進入口尺寸推薦 |
(Safety of earth-moving machinery. Recommendations for minimum access dimensions) |
| BS 6912-8-1992 |
土方機械安全.第8部分:鉸接式車架鎖緊裝置的性能要求規范 |
(Safety of earth-moving machinery - Specification for performance requirements of an articulated frame locking device) |
| BS 6912-9-1992 |
土方機械的安全.第9部分:液壓挖掘機的提升能力檢驗和計算方法 |
(Safety of earth-moving machinery - Methods for the calculation and verification of the lift capacity of hydraulic excavators) |
| BS 6913-1-1989 |
土方機械的操作和維修.第1部分:一般維修和調整工具指南 |
(Operation and maintenance of earth-moving machinery - Guide to common maintenance and adjustment service tools) |
| BS 6913-10-1994 |
土方機械的操作和維護.第10部分:排液,注液口和液面口螺塞規范 |
(Operation and maintenance of earth-moving machinery - Specification for drain, fizz and level plugs) |
| BS 6913-11-1994 |
土方機械的操作和維護.第11部分:輔助起動示意信號電聯結器規范 |
(Operation and maintenance of earth-moving machinery - Specification for auxiliary starting aid electrical connector) |
| BS 6913-12-1995 |
土方機械的操作和保養.產品識別數字系統的規范 |
(Operation and maintenance of earth-moving machinery - Specification for a product identification numbering system) |
| BS 6913-13-1997 |
土方機械的操作和維修.注油配件規范.管咀類型 |
(Operation and maintenance of earth-moving machinery - Specification for lubrication fittings - Nipple type) |
| BS 6913-14-1997 |
土方機械的操作和維修.注油配件規范.噴油咀 |
(Operation and maintenance of earth-moving machinery - Specification for lubrication fittings - Grease-gun nozzles) |
| BS 6913-15-1997 |
土方機械的操作和維修.維修工具規范.機械拔具和推進器 |
(Operation and maintenance of earth-moving machinery - Specification for service tools - Mechanical pullers and pushers) |
| BS 6913-3-1998 |
土方機械的操作和維修.拖拉機式推土機、平地機和鏟運機用刃口的規范.主要形狀和基本尺寸 |
(Operation and maintenance of earth-moving machinery - Specification for cutting edges used on tractor-dozers, graders and scrapers - Principal shapes and basic dimensions) |
| BS 6913-4-1997 |
土方機械的操作和維修.儀器裝置維修推薦規范 |
(Operation and maintenance of earth-moving machinery - Recommendations for service instrumentation) |
| BS 6913-5-1990 |
土方機械的操作和維修.第5部分:診斷口規范 |
(Operation and maintenance of earth-moving machinery - Specification for diagnostic ports) |
| BS 6913-6-1991 |
土方機械的操作和維修.第6部分:電線和電纜的識別和標志規范 |
(Operation and maintenance of earth-moving machinery - Specification for identification and marking of electrical wires and cables) |
| BS 6913-7-1991 |
土方機械的操作和維修.第7部分:機械利用率術語匯編 |
(Operation and maintenance of earth-moving machinery - Glossary for machine availability) |
| BS 6913-8-1992 |
土方機械的操作和檢修.第8部分:操作控制鈕和其它顯示開關的通用符號規范 |
(Operation and maintenance of earth-moving machinery - Specification for common symbols for operator controls and other displays) |
| BS 6913-9-1994 |
土方機械的操作和維護.第9部分:機器.設備和附件的專用符號規范 |
(Operation and maintenance of earth-moving machinery - Specification for specific symbols for machines, equipment and accessories) |
| BS 6914-1-1997 |
土方機械用術語詞匯(包括尺寸和符號的定義).基本類型 |
(Terminology (including definitions of dimensions and symbols) for earth-moving machinery. Basic types) |
| BS 6914-10-1998 |
土方機械術語(包括尺寸和符號的定義).裝載機商業規范和術語 |
(Terminology (including definitions of dimensions and symbols) for earth-moving machinery - Terminology and commercial specifications for loaders) |
| BS 6914-4-1990 |
土方機械用術語詞匯(包括尺寸和符號的定義).第4部分:翻斗車術語詞匯 |
Terminology (including definitions of dimensions and symbols) for earth-moving machinery - Glossary for dumpers |
| BS 6914-5-1999 |
土方機械術語(包括尺寸和符號的定義).鋪管機術語匯編 |
(Terminology (including definitions of dimensions and symbols) for earth-moving machinery - Glossary for pipelayers) |
| BS 6914-6-1999 |
土方機械術語(包括尺寸和符號定義).自推式鏟土機和輪式拖拉機和設備的商業規范和術語 |
(Terminology (including definitions of dimensions and symbols) for earth-moving machinery - Terminology and commercial specifications for self-propelled crawler and wheel tractors and their equipment) |
| BS 6914-7-1992 |
土方機械的術語(包括尺寸和圖形符號的定義).第7部分:機械性能的詞匯.圖形符號和單位 |
(Terminology (including definitions of dimensions and symbols) for earth-moving machinery - Vocabulary, symbols and units for machine performance) |
| BS 6914-8-1993 |
土方機械的術語(包括尺寸和圖形符號的定義).第8部分:水力沖泥機的術語和工業規范 |
(Terminology (including definitions of dimensions and symbols) for earth-moving machinery - Terminology and commercial specifications for hydraulic excavators) |
| BS 6914-9-1996 |
土方機械的術語(包括尺寸和圖形符號的定義).第9部分:拖拉機式鏟運機術語和商用規范 |
(Terminology (including definitions of dimensions and symbols) for earth-moving machinery - Terminology and commercial specifications for tractor-scrapers) |
| BS 6915-2001 |
全面支撐的鉛板屋頂和墻面涂料的設計與結構規范 |
(Design and construction of fully supported lead sheet roof and wall coverings - Code of practice) |
| BS 6916-10-1988 |
鏈鋸.第10部分:縱向平衡規范 |
(Chain saws - Specification for longitudinal balance) |
| BS 6916-2-1996 |
鏈鋸.第2部分:技術數據 |
(Chain saws - Technical data) |
| BS 6916-3-1988 |
鏈鋸.第3部分:手前部防護裝置的尺寸規范 |
(Chain saws - Specification for dimensions of front hand guards) |
| BS 6916-4-1988 |
鏈鋸.第4部分:手前部防護裝置的強度規范 |
Chain saws - Specification for strength of front hand guards |
| BS 6916-5-1988 |
鏈鋸.第5部分:鏈條制動性能的估算方法 |
(Chain saws - Methods of evaluating chain brake performance) |
| BS 6916-6-1988 |
鏈鋸.第6部分:在操作員位置上空氣傳播噪聲的測量方法 |
(Chain saws - Method of measurement of airborne noise at the operator’s position) |
| BS 6916-7-1998 |
鏈鋸.包括燃料消費的評估引擎性能的方法 |
Chain saws - Method of evaluating engine performance including fuel consumption |
| BS 6916-8-1988 |
鏈鋸.第8部分:手傳遞振動的測量方法 |
Chain saws - Method of measurement of hand-transmitted vibration |
| BS 6916-9-1988 |
鏈鋸.第9部分:手柄的強度規范 |
Chain saws - Specification for strength of handles |
| BS 692-1990 |
氣象用溫度計規范 |
Specification for meteorological thermometers |
| BS 6920-1-2000 |
通過非金屬產品對水質的影響看其對接觸人類用水的適用性.規范 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - Specification |
| BS 6920-2.1-2000 |
通過非金屬產品對水質的影響看其對接觸人類用水的適用性.試驗方法.取樣和試驗 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water - Methods of test - Samples for testing |
| BS 6920-2.2.1-2000 |
通過非金屬產品對水質的影響看其對接觸人類用水的適用性.試驗方法.水的氣味和味道.試驗的一般方法 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water - Methods of test - Odour and flavour of water - General method of test |
| BS 6920-2.2.2-2000 |
通過非金屬產品對水質的影響看其對接觸人類用水的適用性.試驗方法.水的氣味和味道.用軟管,合成管及管道分水的試驗水的氣味和味道的方法 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water - Methods of test - Odour and flavour of water - Method of testing odours and flavours imparted to water |
| BS 6920-2.2.3-2000 |
通過非金屬產品對水質的影響看其對接觸人類用水的適用性.試驗方法.水的氣味和味道.為食品和飲用水準備的使 |
() |
| BS 6920-2.3-2000 |
通過非金屬產品對水質的影響看其對接觸人類用水的適用性.試驗方法.水的外觀 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water - Methods of test - Appearance of water |
| BS 6920-2.4-2000 |
通過非金屬產品對水質的影響看其對接觸人類用水的適用性.試驗方法.水生微生物的生長 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water - Methods of test - Growth of aquatic microorganisms test |
| BS 6920-2.5-2000 |
通過非金屬產品對水質的影響看其對接觸人類用水的適用性.試驗方法.對公眾健康有影響的物質的萃取 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water - Methods of test - The extraction of substances that may be of concern to public health |
| BS 6920-2.6-2000 |
通過非金屬產品對水質的影響看其對接觸人類用水的適用性.試驗方法.金屬的提取 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water - Methods of test - The extraction of metals |
| BS 6920-3-2000 |
通過非金屬產品對水質的影響看其對接觸人類用水的適用性.高溫試驗 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - High temperature tests |
| BS 6920-4-2001 |
與人類消費用水接觸的非金屬產品對水質影響的適用性.水可濾析有機物的GCMS識別方法 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - Method for the GCMS identification of water leachable organic substances |
| BS 6921-1988 |
使用纏管法對軟片電氣絕緣材料的耐熱性的評定方法 |
Method for evaluation of the thermal endurance of flexible sheet electrical insulating materials using the wrapped tube method |
| BS 6923-1988 |
小色差的計算方法 |
(Method for calculation of small colour differences) |
| BS 6925-1988 |
建筑物和土木工程用瀝青砂膠(石灰石集料)規范 |
(Specification for mastic asphalt for building and civil engineering (limestone aggregate)) |
| BS 6931-1988 |
銅和銅合金的術語詞匯 |
(Glossary of terms for copper and copper alloys) |
| BS 6935-5-1988 |
輪椅試驗.第5部分:輪椅的總尺寸、重量和轉動空間的測定方法 |
(Wheelchair tests - Methods for determination of overall dimensions, mass and turning space) |
| BS 6937-1988 |
輪椅術語詞匯 |
(Glossary of wheelchair terms) |
| BS 6938-1988 |
關于準備有色金屬冶金分析用檢定參考材料的文獻的推薦規范 |
(Recommendations for documentation of the preparation of certified reference materials for metallurgical analysis of non-ferrous metals) |
| BS 6940-1-1990 |
全存取通信系統(TACS).第1部分:移動電臺性能要求規范 |
(Total Access Communication System (T.A.C.S) - Specification for performance requirements for mobile stations) |
| BS 6940-2-1990 |
全通路通信系統(TACS).第2部分:移動電臺信號系統性能和試驗規范 |
(Total Access Communication System (T.A.C.S) - Specification for performance and tests of the signalling system of mobile stations) |
| BS 6942-2-1989 |
氧氣燃?xì)夂附雍皖愃乒に囉玫某商仔⌒凸ぞ叩脑O(shè)計和構造.第2部分:使用可充 氧氣和燃?xì)獾娜萜鞯某商仔⌒凸ぞ咭?guī) |
(Design and construction of small kits for oxy-fuel gas welding and allied processes - Specification for kits using refillable gas containers for oxygen and fuel gas) |
| BS 6943-1988 |
印制電路板布局用電子件形狀分類 |
(Classification of shapes of electronic components for placement on printed wiring boards) |
| BS 6944-1988 |
黑色金屬(不包括壓力管應用的)中火花對接焊規范 |
(Specification for flash welding of butt joints in ferrous metals (excluding pressure piping applications)) |
| BS 6946-1988 |
電氣設備用金屬管道電纜支撐系統規范 |
(Specification for metal channel cable support systems for electrical installations) |
| BS 6947-1988 |
酸性油和回收脂肪酸餾出物規范 |
(Specification for acid oils and recovered fatty acid distillates) |
| BS 6949-1991 |
冷用(與飲用水接觸的除外)瀝青基涂層的規范 |
(Specification for bitumen-based coatings for cold application excluding use in contact with potable water) |
| BS 6953-1988 |
建筑結構中定位劃線和測量用方法的術語詞匯 |
(Glossary of terms for procedures for setting out, measurement and surveying in building construction (including guidance notes)) |
| BS 6954-1-1988 |
建筑用公差.第1部分:評定基本原則和規格的推薦規范 |
(Tolerances for building - Recommendations for basic principles for evaluation and specification) |
| BS 6954-2-1988 |
建筑用公差.第2部分:具有正規分布尺寸的構件之間預配合的統計基礎推薦規范 |
(Tolerances for building - Recommendations for statistical basis for predicting fit between components having a normal distribution of sizes) |
| BS 6954-3-1988 |
建筑用公差.第3部分:選擇對象尺寸和預配合推薦規范 |
(Tolerances for building - Recommendations for selecting target size and predicting fit) |
| BS 6955-1-1994 |
振動和沖擊傳感器的校正.主振動的激光干涉校正法 |
(Calibration of vibration and shock pick-ups - Methods for primary vibration calibration by laser interferometry) |
| BS 6955-10-1994 |
振動和沖擊傳感器的校正.強烈沖擊振動引起振動和沖擊初級校正法 |
(Calibration of vibration and shock pick-ups - Method for primary calibration by high impact shocks) |
| BS 6955-11-1994 |
振動和沖擊傳感器的校正.橫向振動靈敏度的試驗方法 |
(Calibration of vibration and shock pick-ups - Method of test for transverse vibration sensitivity) |
| BS 6955-12-1994 |
振動和沖擊傳感器的校正.橫向沖擊靈敏度的試驗方法 |
(Calibration of vibration and shock pick-ups - Method of test for transverse shock sensitivity) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com