標準號 |
中文名稱 |
英文名稱 |
| EN ISO 12683-2004 |
機械鍍鋅涂層.規范和試驗方法 |
|
| EN ISO 12687-1998 |
金屬覆蓋層孔隙率試驗潮濕硫(硫化)試驗 |
Metallic coatings - Porosity tests - Humid sulfur (flowers of sulfur) test (ISO 12687:1996) |
| EN ISO 12706-2000 |
無損檢測術語穿透試驗用術語 |
Non-destructive testing - Terminology - Terms used in penetrant testing (ISO 12706:2000) |
| EN ISO 12737-1999 |
金屬材料平面變形斷裂韌性的測定 |
Metallic materials - Determination of plane-strain fracture toughness (ISO 12737:1996) |
| EN ISO 12777-1-1996 |
托盤連接件的試驗方法第1部分：托盤用釘子、其他榫釘型緊固件和U形釘?shù)目箯澰囼?/td>
| Methods of test for pallet joints - Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples (ISO 12777-1:1994) |
| EN ISO 12777-2-2000 |
托盤連接件的試驗方法第2部分：托盤用釘子和U形釘?shù)目估囼?/td>
| Methods of test for pallet joints - Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples (ISO 12777-2:2000) |
| EN ISO 12777-3-2002 |
托盤連接件的試驗方法第3部分：托盤連接件的強度測定 |
Methods of test for pallet joints - Part 3: Determination of strength of pallet joints (ISO 12777-3:2002) |
| EN ISO 128-20-2001 |
技術制圖畫法的一般原則第20部分：圖線 |
Technical drawings - General principles of presentation - Part 20: Basic conventions for lines (ISO 128-20:1996) |
| EN ISO 128-21-2001 |
技術制圖畫法的一般原則第21部分：計算機輔助設計(CAD)系統用圖線的表示 |
Technical drawings - General principles of presentation - Part 21: Preparation of lines by CAD systems (ISO 128-21:1997) |
| EN ISO 12864-1997 |
眼科光學隱形眼鏡雜散光的測定 |
Ophthalmic optics - Contact lenses - Determination of scattered light (ISO 12864:1997) |
| EN ISO 12865-1998 |
眼科儀器檢眼鏡 |
Ophthalmic instruments - Retinoscopes (ISO 12865:1998) |
| EN ISO 12867-1998 |
眼科儀器試驗架 |
Ophthalmic instruments - Trial frames (ISO 12867:1998) |
| EN ISO 12870-1997 |
眼科光學眼鏡鏡框一般要求和試驗方法 |
Ophthalmic optics - Spectacle frames - General requirements and test methods (ISO 12870:1997) |
| EN ISO 12870-2004 |
眼科光學.眼鏡架.要求和試驗方法 |
|
| EN ISO 12894-2001 |
熱環境的人類工效學暴露于極熱或極冷環境時個人的醫學觀察 |
Ergonomics of the thermal environment - Medical supervision of individuals exposed to extreme hot or cold environments (ISO 12894:2001) |
| EN ISO 12922-2002 |
潤滑劑、工業潤滑油和有關產品(L類)H組(液壓系統)HFAE、HFAS、 HFB、 HFC、 HFDR 和HFDU各品種的規格(包 |
Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:1999, including Technical Corrigendum 1:2001) |
| EN ISO 12937-2000 |
石油產品水分的測定庫侖卡爾·費休滴定法 |
Petroleum products - Determination of water - Coulometric Karl Fischer titration method (ISO 12937:2000) |
| EN ISO 12944-1-1998 |
色漆和清漆防護漆體系對鋼結構的腐蝕防護第1部分：總則 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction (ISO 12944-1:1998) |
| EN ISO 12944-2-1998 |
色漆和清漆防護漆體系對鋼結構的腐蝕防護第2部分：環境分類 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 2: Classification of environments (ISO 12944-2:1998) |
| EN ISO 12944-3-1998 |
色漆和清漆防護漆體系對鋼結構的腐蝕防護第3部分：設計內容 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design considerations (ISO 12944-3:1998) |
| EN ISO 12944-4-1998 |
色漆和清漆防護漆體系對鋼結構的腐蝕防護第4部分：表面類型和表面處理 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 4: Types and surface preparation (ISO 12944-4:1998) |
| EN ISO 12944-5-1998 |
色漆和清漆防護漆體系對鋼結構的腐蝕防護第5部分：防護漆體系 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:1998) |
| EN ISO 12944-6-1998 |
色漆和清漆防護漆體系對鋼結構的腐蝕防護第6部分：實驗室性能試驗方法 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods (ISO 12944-6:1998) |
| EN ISO 12944-7-1998 |
色漆和清漆防護漆體系對鋼結構的腐蝕防護第7部分：涂漆工藝的實施和管理 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 7: Execution and supervision of paint work (ISO 12944-7:1998) |
| EN ISO 12944-8-1998 |
色漆和清漆防護漆體系對鋼結構的腐蝕防護第8部分：新工藝和維修規范的開發 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8: Development of specifications for new work and maintenance (ISO 12944-8:1998) |
| EN ISO 12945-1-2000 |
紡織品織物表面起球和起毛性的測定第1部分：起球箱法 |
Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 1: Pilling box method (ISO 12945-1:2000) |
| EN ISO 12945-2-2000 |
紡織品織物表面起球和起毛性的測定第2部分：改型的馬丁代爾儀法 |
Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 2: Modified Martindale method (ISO 12945-2:2000) |
| EN ISO 12947-1-1998 |
紡織品用馬丁代爾(Martindale)法對織物抗磨損性的測定第1部分：馬丁代爾耐磨實驗儀 |
Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 1: Martindale abrasion testing apparatus (ISO 12947-1:1998) |
| EN ISO 12947-2-1998 |
紡織品用馬丁代爾(Martindale)法對織物抗磨損性的測定第2部分：試樣破損的測定 |
Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown (ISO 12947-2:1998) |
| EN ISO 12947-3-1998 |
紡織品用馬丁代爾(Martindale)法對織物抗磨損性的測定第3部分：質量損失的測定 |
Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss (ISO 12947-3:1998) |
| EN ISO 12947-4-1998 |
紡織品用馬丁代爾(Martindale)法對織物抗磨損性的測定第4部分：外觀變化的評定 |
Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change (ISO 12947-4:1998) |
| EN ISO 12952-1-1998 |
紡織品床上用品的燃燒性能第1部分：由發煙燃燒的香煙為點火源的可點燃性的一般試驗方法 |
Textiles - Burning behaviour of bedding items - Part 1: General test methods for the ignitability by a smouldering cigarette (ISO 12952-1:1998) |
| EN ISO 12952-2-1998 |
紡織品床上用品的燃燒性能第2部分：由發煙燃燒的香煙為點火源的可點燃性的特殊試驗方法 |
Textiles - Burning behaviour of bedding items - Part 2: Specific test methods for the ignitability by a smouldering cigarette (ISO 12952-2:1998) |
| EN ISO 12952-3-1998 |
紡織品床上用品的燃燒性能第3部分：小點火源的可點燃性的一般試驗方法 |
Textiles - Burning behaviour of bedding items - Part 3: General test methods for the ignitability by a small open flame (ISO 12952-3:1998) |
| EN ISO 12952-4-1998 |
紡織品床上用品的燃燒性能第4部分：小點火源的可點燃性的特殊試驗方法 |
Textiles - Burning behaviour of bedding items - Part 4: Specific test methods for the ignitability by a small open flame (ISO 12952-4:1998) |
| EN ISO 12956-1999 |
土工布及相關產品特征孔徑的測定 |
Geotextiles and geotextile-related products - Determination of the characteristic opening size (ISO 12956:1999) |
| EN ISO 12958-1999 |
土工布及相關產品平面內水流量的測定 |
Geotextiles and geotextile-related products - Determination of water flow capacity in their plane (ISO 12958:1999) |
| EN ISO 13000-1-1997 |
塑料聚四氟乙烯(PTFE)半成品 第1部分：要求和命名 |
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:1997) |
| EN ISO 13000-2-1997 |
塑料聚四氟乙烯(PTFE)半成品 第2部分：試樣的制備和性能的測定 |
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:1997) |
| EN ISO 13002-1998 |
碳纖維長絲紗命名體系 |
Carbon fibre - Designation system for filament yarns (ISO 13002:1998) |
| EN ISO 1302-2002 |
產品幾何量技術規范(GPS)技術產品文件表面特征的表示 |
Geometrical Product specification (GPS) - Indication of surface texture in technical product documentation (ISO 1302:2002) |
| EN ISO 1307-1995 |
一般工業用橡膠和塑料軟管孔徑和公差及長度公差 |
Rubber and plastics hoses for general-purpose industrial applications - Bore diameters and tolerances, and tolerances on length (ISO 1307:1992) |
| EN ISO 13090-1-1998 |
機械振動與沖擊試驗及與人有關的實驗安全方面指南第1部分：機械振動和反復沖擊下的人體試驗 |
Mechanical vibration and shock - Guidance on safety aspects of tests and experiments with people - Part 1: Exposure to whole-body mechanical vibration and repeated shock (ISO 13090-1:1998) |
| EN ISO 13212-1999 |
眼科光學隱形眼鏡保護產品儲存壽命的測定指南 |
Ophthalmic optics - Contact lens care products - Guidelines for the determination of shelf-life (ISO 13212:1999) |
| EN ISO 13230-1999 |
眼科光學條形碼規范 |
Ophthalmic optics - Bar code specifications (ISO 13230:1999) |
| EN ISO 13294-1997 |
牙科手機牙鉆氣動機 |
Dental handpieces - Dental air-motors (ISO 13294:1997) |
| EN ISO 13295-1996 |
牙科旋轉器械心軸 |
Dental rotary instruments - Mandrels (ISO 13295:1994) |
| EN ISO 13297-2000 |
小艇電氣系統交流系統 |
Small craft - Electrical systems - Alternating current installations (ISO 13297:2000) |
| EN ISO 13337-1997 |
彈性圓柱銷開槽、輕型 |
Spring-type straight pins - Slotted, light duty (ISO 13337:1997) |
| EN ISO 13340-2001 |
可運輸氣瓶不可再充填的氣瓶用瓶閥規范和原型試驗 |
Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing (ISO 13340:2001) |
| EN ISO 13355-2003 |
包裝 滿裝運輸包裝和單件貨物 垂直隨機振動試驗 |
Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test (ISO 13355:2001) |
| EN ISO 13366-1-1997 |
牛乳體細胞的菌落計數第1部分：鏡檢法 |
Milk - Enumeration of somatic cells - Part 1: Microscopic method (ISO 13366-1:1997) |
| EN ISO 13366-2-1997 |
牛乳體細胞的菌落計數第2部分：電子粒子計數法 |
Milk - Enumeration of somatic cells - Part 2: Electronic particle counter method (ISO 13366-2:1997) |
| EN ISO 13366-3-1997 |
牛乳體細胞的菌落計數第3部分：熒光光電法 |
Milk - Enumeration of somatic cells - Part 3: Fluoro-opto-electronic method (ISO 13366-3:1997) |
| EN ISO 13370-1998 |
建筑物熱性能地面?zhèn)鳠嵊嬎惴椒?/td>
| Thermal performance of buildings - Heat transfer via the ground - Calculation methods (ISO 13370:1998) |
| EN ISO 13395-1996 |
水質用流動分析(CFA 和FIA)和光譜檢測法測定水中亞硝酸鹽氮和硝酸鹽氮及二者的總量 |
Water quality - Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection (ISO 13395:1996) |
| EN ISO 13397-1-1995 |
牙周 刮匙、牙刮器和牙挖器 第1部分：一般要求 |
Periodontal curettes, dental scalers and excavators - Part 1: General requirements (ISO 13397-1:1995) |
| EN ISO 13397-3-1996 |
牙周 刮匙、牙刮器和牙挖器 第3部分：牙刮器H型 |
Periodontal curettes, dental scalers and excavators - Part 3: Dental scalers - H-type (ISO 13397-3:1996) |
| EN ISO 13397-4-1997 |
牙周 刮匙、牙刮器和牙挖器 第4部分：牙挖器盤形 |
Periodontal curettes, dental scalers and excavators - Part 4: Dental excavators - Discoid-type (ISO 13397-4:1997) |
| EN ISO 13402-2000 |
外科和牙科手持器械耐蒸汽消毒、耐腐蝕 和耐熱性能的測定 |
Surgical and dental hand instruments - Determination of resistance against autoclaving, corrosion and thermal exposure (ISO 13402:1995) |
| EN ISO 13406-1-1999 |
平板視覺顯示工作的人類工效學要求第1部分：概述 |
Ergonomic requirements for work with visual display based on flat panels - Part 1: Introduction (ISO 13406-1:1999) |
| EN ISO 13406-2-2001 |
平板視覺顯示工作的人類工效學要求第2部分：平板顯示的人類工效學要求 |
Ergonomic requirements for work with visual displays based on flat panels - Part 2: Ergonomic requirements for flat panel displays (ISO 13406-2:2001) |
| EN ISO 13407-1999 |
以人為中心的交互系統設計過程 |
Human-centred design processes for interactive systems (ISO 13407:1999) |
| EN ISO 13426-1-2003 |
土工布及相關產品內部結構連接強度第1部分：土工格室 |
Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 1: Geocells (ISO 13426-1:2003) |
| EN ISO 13427-1998 |
土工布及相關產品磨損模擬(滑塊試驗) |
Geotextiles and geotextile-related products - Abrasion damage simulation (sliding block test) (ISO 13427:1998) |
| EN ISO 13431-1999 |
土工布及相關產品拉伸蠕變和蠕變斷裂的測定 |
Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour (ISO 13431:1999) |
| EN ISO 13437-1998 |
土工布及相關產品在土壤中安置和取出試樣、并在實驗室試驗試樣的方法 |
Geotextiles and geotextile-related products - Method for installing and extracting samples in soil, and testing specimens in laboratory (ISO 13437:1998) |
| EN ISO 13438-2004 |
土工織物和土工織物相關產品.測定耐氧化性的篩選試驗方法 |
|
| EN ISO 1346-2004 |
纖維繩索.聚丙烯裂膜、單絲和多絲(PP2)及聚丙烯高彈性多絲(PP3)繩索.3、4和8股繩索 |
|
| EN ISO 13468-1-1996 |
塑料透明材料光透射率總量的測定第1部分：單束光發射儀器 |
Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument (ISO 13468-1:1996) |
| EN ISO 13473-1-2004 |
利用表面外觀表征路面結構.第1部分:平均剖面高度的測定 |
|
| EN ISO 13478-1997 |
流體輸送用熱塑性塑料管材耐快速裂紋擴展(RCP)的測定全尺寸試驗(FST) |
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST) (ISO 13478:1997) |
| EN ISO 13479-1997 |
流體輸送用聚稀烴管材抗裂紋擴展的測定切口管材慢速裂紋增長的試驗(切口試驗) |
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (notch test) (ISO 13479:1997) |
| EN ISO 13485-2003 |
醫療器械 質量管理體系管理用途的要求 |
Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2003) |
| EN ISO 13500-1998 |
石油和天然氣工業鉆井液體材料規范和測試 |
Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests (ISO 13500:1998) |
| EN ISO 13533-2001 |
石油和天然氣工業鉆井和生產設備鉆孔設備 |
Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment (ISO 13533:2001) |
| EN ISO 13534-2000 |
石油和天然氣工業鉆井和生產設備提升設備的檢查、維護、修理和再制造 |
Petroleum and natural gas industries - Drilling and production equipment - Inspection, maintenance, repair and remanufacture of hoisting equipment (ISO 13534:2000) |
| EN ISO 13535-2000 |
石油和天然氣工業鉆井和生產設備提升設備 |
Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment (ISO 13535:2000) |
| EN ISO 13565-1-1997 |
產品幾何量技術規范(GPS)表面結構：輪廓法具有分層功能特性的表面第1部分：濾波和一般測量條件 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996) |
| EN ISO 13565-2-1997 |
產品幾何量技術規范(GPS)表面結構：輪廓法具有分層功能特性的表面第2部分：利用線性材料比率曲線描述 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve (ISO 13565-2:1996) |
| EN ISO 13565-3-2000 |
產品幾何量技術規范(GPS)表面結構：輪廓法具有分層功能特性的表面第3部分：利用材料的概率曲線描述高 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 3: Height characterization using the material probability curve (ISO 13565-3:1998) |
| EN ISO 13567-1-2002 |
技術產品文件計算機輔助設計(CAD)圖層的編排和命名第1部分：綜述和原則 |
Technical product documentation - Organization and naming of layers for CAD - Part 1: Overview and principles (ISO 13567-1:1998) |
| EN ISO 13567-2-2002 |
技術產品文件計算機輔助設計(CAD)圖層的編排和命名第2部分：用于建筑工程文件的概念、格式和代碼 |
Technical product documentation - Organization and naming of layers for CAD - Part 2: Concepts, format and codes used in construction documentation (ISO 13567-2:1998) |
| EN ISO 13625-2002 |
石油和天然氣工業 鉆探和開采設備 海洋鉆機提升機聯結器 |
Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings (ISO 13625:2002) |
| EN ISO 13628-1-1999 |
石油和天然氣工業水下采油系統的設計和操作第1部分：一般要求和建議 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations (ISO 13628-1:1999) |
| EN ISO 13628-2-2000 |
石油和天然氣工業水下采油系統的設計和操作第2部分：海底和海洋設備用軟管系統 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Flexible pipe systems for subsea and marine applications (ISO 13628-2:2000) |
| EN ISO 13628-3-2000 |
石油和天然氣工業水下采油系統的設計和操作第3部分：通流線系統 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems (ISO 13628-3:2000) |
| EN ISO 13628-4-1999 |
石油和天然氣工業水下采油系統的設計和操作第4部分：井口和采油樹設備 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment (ISO 13628-4:1999) |
| EN ISO 13631-2002 |
石油和天然氣工業整裝往復式氣體壓縮機 |
Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002) |
| EN ISO 13666-1998 |
眼科光學眼鏡鏡片 |
Ophthalmic optics - Spectacle lenses - Vocabulary (ISO 13666:1998) |
| EN ISO 13680-2001 |
石油和天然氣工業用作套管、油管和接箍的防腐合金無縫鋼管交貨技術條件 |
Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2000) |
| EN ISO 13691-2002 |
石油和天然氣工業特殊用途高速齒輪裝置 |
Petroleum and natural gas industries - High-speed special purpose gear units (ISO 13691:2001) |
| EN ISO 13694-2000 |
光學和光學儀器激光和激光設備激光束能量密度分布的試驗方法 |
Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2000) |
| EN ISO 13695-2004 |
光學和光子學.激光及其相關設備.激光光譜特性的試驗方法 |
|
| EN ISO 13696-2002 |
光學和光學儀器光學部件擴散引起的光輻射的試驗方法 |
Optics and optical instruments - Test methods for radiation scattered by optical components (ISO 13696:2002) |
| EN ISO 13702-1999 |
石油和天然氣工業對海上開發安裝中著火和爆炸的控制和減弱要求和指南 |
Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines (ISO 13702:1999) |
| EN ISO 13703-2000 |
石油和天然氣工業海上開采平臺上管道系統的設計和安裝 |
Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms (ISO 13703:2000) |
| EN ISO 13705-2001 |
石油和天然氣工業一般煉油廠的燒火的加熱器 |
Petroleum and natural gas industries - Fired heaters for general refinery service (ISO 13705:2001) |
| EN ISO 13706-2000 |
石油和天然氣工業風冷熱交換器 |
Petroleum and natural gas industries - Air-cooled heat exchangers (ISO 13706:2000) |
| EN ISO 13710-2004 |
石油、石油化學和天然氣工業.往復式變?nèi)菡婵毡?/td>
| |
| EN ISO 13716-2000 |
牙科學可逆和不可逆水解膠體印模材料系統 |
Dentistry - Reversible-irreversible hydrocolloid impression material systems (ISO 13716:1999) |
| EN ISO 13731-2001 |
熱環境的人類工效學詞匯和符號 |
Ergonomics of the thermal environment - Vocabulary and symbols (ISO 13731:2001) |
| EN ISO 13734-2000 |
天然氣有機硫化物添味劑要求和試驗方法 |
Natural gas - Organic sulfur compounds used as odorants - Requirements and test methods (ISO 13734:1998) |
| EN ISO 13736-1997 |
石油產品和其他液體閃點的測定阿貝爾閉口杯法 |
Petroleum products and other liquids - Determination of flash point - Abel closed cup method (ISO 13736:1997) |
| EN ISO 13753-1998 |
機械振動與沖動手臂振動手臂系統為負載時彈性材料振動傳遞率的測量方法 |
Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998) |
| EN ISO 13757-1996 |
液化石油氣油殘余物的測定高溫法 |
Liquefied petroleum gases - Determination of oily residues - High-temperature method (ISO 13757:1996) |
| EN ISO 13758-1996 |
液化石油氣評價丙烷干燥度閥凍結法 |
Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method (ISO 13758:1996) |
| EN ISO 13759-1996 |
石油產品柴油中硝酸烷基酯含量的測定分光光度法 |
Petroleum products - Determination of alkyl nitrate in diesel fuels - Spectrometric method (ISO 13759:1996) |
| EN ISO 13760-1998 |
流體輸送用塑料壓力管材Miner規則累積破壞的計算方法 |
Plastics pipes for the conveyance of fluids under pressure - Miners rule - Calculation method for cumulative damage (ISO 13760:1998) |
| EN ISO 13783-1997 |
塑料管道系統硬聚氯乙烯(PVC-U)端部承受負荷的雙承口連接件密封和承受彎曲及內壓的試驗方法 |
Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure (ISO 13783:1997) |
| EN ISO 13786-1999 |
建筑部件熱性能動態熱特征計算方法 |
Thermal performance of building components - Dynamic thermal characteristics - Calculation methods (ISO 13786:1999) |
| EN ISO 13787-2003 |
建筑物設備和工業設備用隔熱產品申報的熱傳導性的測定 |
Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity (ISO 13787:2003) |
| EN ISO 13788-2001 |
建筑構件和件的濕熱性能避免嚴重的表面潮濕和間隙式冷凝的內表溫度計算方法 |
Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation method (ISO 13788:2001) |
| EN ISO 13789-1999 |
建筑物熱性能熱損失系數計算方法 |
Thermal performance of buildings - Transmission heat loss coefficient - Calculation method (ISO 13789:1999) |
| EN ISO 13790-2004 |
建筑物的熱性能.房間取暖用能量的計算 |
|
| EN ISO 13791-2004 |
建筑物的熱性能.夏季無機械通風冷卻時房間內部溫度的計算.通用標準和確認程序 |
|
| EN ISO 13793-2001 |
建筑物熱性能地基防凍脹的熱設計 |
Thermal performance of buildings - Thermal design of foundations to avoid frost heave (ISO 13793:2001) |
| EN ISO 13803-2004 |
色漆和清漆.20?漆膜反射光澤度的測定 |
|
| EN ISO 13844-2000 |
塑料管道系統用于硬(聚氯乙烯)(PVC-U) 管道的彈性密封環式承口連接件負壓下密封試驗方法 |
Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure (ISO 13844:2000) |
| EN ISO 13845-2000 |
塑料管道系統用于硬(聚氯乙烯)(PVC-U) 管道的彈性密封環式承口連接件內壓下角度偏轉密封試驗方法 |
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2000) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com