標準號 |
中文名稱 |
英文名稱 |
| ISO 1183-3-1999 |
塑料.非泡沫塑料的密度測定方法.第3部分:氣體比重瓶測量法 |
Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method |
| ISO 11833-1-1998 |
塑料.未增塑聚氯乙烯薄板.類型、尺寸和特征.第1部分:厚度不低于1mm的薄板 |
(Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm) |
| ISO 11833-2-1998 |
塑料.未增塑聚氯乙烯薄板.類型、尺寸和特征.第2部分:厚度低于1mm的薄板 |
Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm |
| ISO 11835-2002 |
道路車輛.帶防抱制動系統(ABS)的機動車.制動性能的測量 |
Road vehicles - Motor vehicles with antilock braking systems (ABS) - Measurement of braking performance |
| ISO 11838-1997 |
摩托車和摩托車駕駛員運動學.詞匯 |
Motorcycle and motorcycle-rider kinematics - Vocabulary |
| ISO 11841-1-2000 |
道路車輛和內燃發動機.過濾器詞匯.第1部分:過濾器和過濾器件定義 |
Road vehicles and internal combustion engines - Filter vocabulary - Part 1: Definitions of filters and filter components |
| ISO 11841-2-2000 |
道路車輛和內燃發動機.過濾器詞匯.第2部分:過濾器及其件特性的定義 |
Road vehicles and internal combustion engines - Filter vocabulary - Part 2: Definitions of characteristics of filters and their components |
| ISO 11843-1 Technical Corrigendum 1-2003 |
檢測能力.第1部分:術語和定義.技術勘誤1 |
|
| ISO 11843-1-1997 |
檢測的能力.第1部分:術語和定義 |
(Capability of detection - Part 1: Terms and definitions) |
| ISO 11843-2-2000 |
檢測的能力.第2部分:線性校準方法 |
(Capability of detection - Part 2: Methodology in the linear calibration case) |
| ISO 11843-3-2003 |
檢測能力.第3部分:在無校準數據可采用情況下測定反應變量關鍵值 |
(Capability of detection - Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used) |
| ISO 11843-3-2003 |
檢測能力.第3部分:在無校準數據可采用情況下測定反應變量關鍵值 |
|
| ISO 11843-4-2003 |
檢測能力.第4部分:用最小可檢測值與給定值相比對的方法 |
|
| ISO 11845-1995 |
金屬和合金的腐蝕.腐蝕試驗的一般原則 |
(Corrosion of metals and alloys - General principles for corrosion testing) |
| ISO 11846-1995 |
金屬和合金的腐蝕.腐蝕試驗的一般原則.測定溶解熱處理鋁合金的耐晶間腐蝕性 |
(Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys) |
| ISO 1185-2003 |
道路車輛.牽引車和掛車之間電氣連接用連接器.帶24V標稱電源電壓的車輛用24N(標準)型7極連接器 |
(Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage ) |
| ISO 1185-2003 |
道路車輛.牽引車和掛車之間電氣連接用連接器.帶24V標稱電源電壓的車輛用24N(標準)型7極連接器 |
|
| ISO 11850-2003 |
林業機械.自行式機械.安全要求 |
(Machinery for forestry - Self-propelled machinery - Safety requirements ) |
| ISO 11850-2003 |
林業機械.自行式機械.安全要求 |
|
| ISO 11857-1999 |
紡織地板覆蓋物.剝離抗性的測定 |
(Textile floor coverings - Determination of resistance to delamination) |
| ISO 11858-1999 |
鋪地織物.接觸泡沫易碎性的測定 |
(Textile floor coverings - Determination of friability of attached foams) |
| ISO 11859-1999 |
紡織地板覆蓋物.純毛手編地毯.規范 |
(Textile floor coverings - Pure wool, hand-knotted pile carpets - Specification) |
| ISO 11860-1999 |
鋪地織物.黃麻地毯背面纖維.規范 |
(Textile floor coverings - Jute carpet backing fabric - Specification) |
| ISO 11861-1999 |
紡織地板覆蓋物.椰殼粗纖維墊.類型和規范 |
Textile floor coverings - Coir mats - Types and specification |
| ISO 11862-1993 |
土方機械.輔助起動示意信號電聯結器 |
(Earth-moving machinery; auxiliary starting aid electrical connector) |
| ISO 11865-1995 |
速溶奶粉.白斑點的測定 |
(Instant whole milk powder - Determination of white flecks number) |
| ISO 11866-1-1997 |
牛奶和奶制品.推測大腸桿菌的計算.第1部分:概略數量技術 |
(Milk and milk products - Enumeration of presumptive Escherichia coli - Part 1: Most probable number technique) |
| ISO 11866-2-1997 |
奶和奶制品.大腸埃希桿菌的計數.第2部分:利用4-甲基馓形科(β)-D-葡糖苷酸(MUG)的最大可能值技術 |
(Milk and milk products - Enumeration of presumptive Escherichia coli - Part 2: Most probable number technique using 4-methylumbelliferyl--D-glucuronide (MUG)) |
| ISO 11866-3-1997 |
奶和奶制品.大腸埃希桿菌的估算.第3部分:在40℃時利用膜狀物對奶制品的菌落計數技術 |
(Milk and milk products - Enumeration of presumptive Escherichia coli - Part 3: Colony-count technique at 44 C using membranes) |
| ISO 11868-1997 |
熱處理牛奶.乳果糖含量的測定.高效液體色譜分析法 |
(Heat-treated milk - Determination of lactulose content - Method using high-performance liquid chromatography) |
| ISO 11869-1997 |
酸牛奶.滴定酸度的測定.電位測量法 |
(Yoghurt - Determination of titratable acidity - Potentiometric method) |
| ISO 11870-2000 |
牛奶和牛奶制品.脂肪含量的測定.油脂計法使用的一般指南 |
(Milk and milk products - Determination of fat content - General guidance on the use of butyrometric methods) |
| ISO 1188-1984 |
電影技術.全涂磁的16mm電影膠片上磁性聲帶的錄音特性.規范 |
(Cinematography; Recorded characteristic for magnetic sound on full-coat 16 mm motion-picture film; Specifications) |
| ISO 11881 Technical Corrigendum 1-1999 |
金屬和合金的腐蝕.鋁合金的片狀剝落腐蝕試驗.技術勘誤1 |
(Corrosion of metals and alloys - Exfoliation corrosion testing of aluminium alloys; Technical Corrigendum 1) |
| ISO 11881-1999 |
金屬和合金腐蝕.鋁合金剝離腐蝕試驗 |
(Corrosion of metals and alloys - Exfoliation corrosion testing of aluminium alloys) |
| ISO 11882-1997 |
光學和光學儀器.顯微鏡.35mmSLR攝影機(適用T形螺紋)的接口連接 |
(Optics and optical instruments - Microscopes - Interfacing connection for 35 mm SLR photo cameras (T-thread adaptation)) |
| ISO 11883-1997 |
光學和光學儀器.顯微鏡.對立體顯微鏡作標記 |
Optics and optical instruments - Microscopes - Marking of stereomicroscopes |
| ISO 11884-1-1998 |
光學和光學儀器.立體顯微鏡的最低要求.第1部分:普通立體顯微鏡 |
(Optics and optical instruments - Minimum requirements for stereomicroscopes - Part 1: Stereomicroscopes for general use) |
| ISO 11884-2-1997 |
光學和光學儀器.實體顯微鏡的最低要求.第2部分:高性能顯微鏡 |
(Optics and optical instruments - Minimum requirements for stereomicroscopes - Part 2: High performance microscopes) |
| ISO 11885-1996 |
水質.引導耦合等離子體原子發射光譜法測定33種素 |
(Water quality - Determination of 33 elements by inductively coupled plasma atomic emission spectroscopy) |
| ISO 11886-2002 |
房屋建筑機械設備.打樁驅動和提取設備.術語和商業規范 |
(Building construction machinery and equipment - Pile driving and extracting equipment - Terminology and commercial specification) |
| ISO 1189-1986 |
電影技術.在35mm電影膠片上除成條發行拷貝外的磁性聲帶的錄音特性.規范 |
(Cinematography; Recorded characteristic for magnetic sound records on 35 mm motion-picture film excluding striped release prints; Specifications) |
| ISO 11890-1-2000 |
涂料和清漆.揮發性有機化合物含量的測定.第1部分:差別法 |
(Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method) |
| ISO 11890-2-2000 |
涂料和清漆.揮發性有機化合物含量的測定.第2部分:氣相色譜法 |
(Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method) |
| ISO 11897-1999 |
包裝.熱塑軟薄膜制袋.折邊處的撕裂擴展試驗 |
(Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds) |
| ISO 11898 AMD 1-1995 |
道路車輛.數字信息交換.高速通信用局域網絡控制器.第1次修改 |
(Road vehicles - Interchange of digital information - Controller area network (CAN) for high-speed communication; Amendment 1) |
| ISO 11898-1-2003 |
道路車輛.控制器局域網絡.第1部分:數據鏈層和物理信令 |
(Road vehicles - Controller area network (CAN) - Part 1: Data link layer and physical signalling) |
| ISO 11898-1-2003 |
道路車輛.控制器局域網絡.第1部分:數據鏈層和物理信令 |
|
| ISO 11898-1993 |
道路車輛.數字信息交換.高速通信用局域網控制器 |
(Road vehicles; interchange of digital information; controller area network (CAN) for high-speed communication) |
| ISO 11898-2-2003 |
道路車輛.控制器局域網絡.第2部分:高速媒體存取單 |
(Road vehicles - Controller area network (CAN) - Part 2: High-speed medium access unit) |
| ISO 11898-2-2003 |
道路車輛.控制器局域網絡.第2部分:高速媒體存取單 |
|
| ISO 11898-4-2004 |
道路車輛.控制器局域網絡.第4部分:時間觸發通信 |
|
| ISO 119-1977 |
塑料.酚-甲醛模塑.單體酚的測定.碘量法 |
Plastics; Phenol-formaldehyde mouldings; Determination of free phenols; Iodometric method |
| ISO 1190-1-1982 |
銅和銅合金.名稱與牌號表示規則.第1部分:材料的名稱與符號 |
Copper and copper alloys; Code of designation; Part 1 : Designation of materials |
| ISO 11900-1-1994 |
壓制用工具.球形閘門凸模固定板.第1部分:小功率用A或B型、矩形及正方形 |
(Tools for pressing - Ball-lock punch retainers - Part 1: Types A and B, rectangular and square for light duty) |
| ISO 11900-2-2001 |
壓制用工具.球形閘門凸模固定板.第2部分:小功率用C和D型 |
(Tools for pressing - Ball-lock punch retainers - Part 2: Types C and D, reduced for light duty) |
| ISO 11900-3-2004 |
沖壓工具.球鎖緊沖頭固定板.第3部分:用于重載荷的減徑E型固定板 |
|
| ISO 11900-3-2004 |
沖壓工具.球鎖緊沖頭固定板.第3部分:用于重載荷的減徑E型固定板 |
|
| ISO 11901-1-1995 |
壓力工具.氣壓彈簧.第1部分:總規范 |
(Tools for pressing - Gas springs - Part 1: General specifications) |
| ISO 11901-1-2003 |
沖壓工具.氣壓彈簧.第1部分:一般規范 |
|
| ISO 11901-1-2003 |
沖壓工具.氣壓彈簧.第1部分:一般規范 |
|
| ISO 11901-2-2004 |
沖壓工具.氣壓彈簧.第2部分:附件規范 |
|
| ISO 11901-2-2004 |
沖壓工具.氣壓彈簧.第2部分:附件規范 |
|
| ISO 11903-1996 |
壓力加工工具.承載墩安裝指南 |
Tools for pressing - Guide pillar mountings |
| ISO 11904-1-2002 |
聲學.從接近耳朵的聲源處測定聲排放強度.利用真耳中傳聲器技術(MIRE技術) |
Acoustics - Determination of sound immission from sound sources placed close for the ear - Part 1: Technique using a microphone in a real ear (MIRE technique) |
| ISO 11904-2-2004 |
聲學.從接近耳朵的聲源處測定聲排放強度.第2部分:利用人體模型技術 |
|
| ISO 11904-2-2004 |
聲學.從接近耳朵的聲源處測定聲排放強度.第2部分:利用人體模型技術 |
|
| ISO 11905-1-1997 |
水質.氮的測定.第1部分:用過氧焦硫酸鹽進行氧化溶解的方法 |
(Water quality - Determination of nitrogen - Part 1: Method using oxidative digestion with peroxodisulfate) |
| ISO 11906-1999 |
顯微制圖術.縮微膠片系列.操作過程 |
Micrographics - Microfilming of serials - Operating procedures |
| ISO 11907-1-1998 |
塑料.煙霧產生.滅火廢液腐蝕性的測定.第1部分:導則 |
Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Part 1: Guidance |
| ISO 11907-2-1995 |
塑料制品.火焰沖擊波的測定.第2部分:靜態法 |
Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Part 2: Static method |
| ISO 11907-3-1998 |
塑料.煙霧產生.滅火廢液腐蝕性的測定.第3部分:使用移動式熔爐的動態分解法 |
Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Part 3: Dynamic decomposition method using a travelling furnace |
| ISO 11907-4-1998 |
塑料.煙霧產生.滅火廢液腐蝕性的測定.第4部分:使用熱輻射式加熱器的動態分解法 |
Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Part 4: Dynamic decomposition method using a conical radiant heater |
| ISO 11908-1996 |
清漆和涂料用粘接劑.胺樹脂.一般檢驗法 |
Binders for paints and varnishes - Amino resins - General methods of test |
| ISO 11909-1996 |
清漆和涂料用粘接劑.聚異氰酸樹脂.一般檢驗法 |
Binders for paints and varnishes - Polyisocyanate resins - General methods of test |
| ISO 11922-1-1997 |
流體傳輸用熱塑管.尺寸和公差.第1部分:米制系列 |
Thermoplastics pipes for the conveyance of fluids - Dimensions and tolerances - Part 1: Metric series |
| ISO 11922-2-1997 |
流體傳輸用熱塑管.尺寸和公差.第2部分:英制系列 |
Thermoplastics pipes for the conveyance of fluids - Dimensions and tolerances - Part 2: Inch-based series |
| ISO 11923-1997 |
水質.測定通過玻璃纖維過濾器過濾的懸浮固體 |
Water quality - Determination of suspended solids by filtration through glass-fibre filters |
| ISO 11925-2-2002 |
對火反應試驗.直接受火的建筑制品的可燃性.第2部分:單一火源試驗 |
Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame - Part 2: Single-flame source test |
| ISO 11925-3 Technical Corrigendum 1-1998 |
防火試驗的反作用.經受火焰直接熏烤的建筑產品的可燃性.第3部分:多個火焰源試驗.技術勘誤1 |
(Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame - Part 3: Multi-source test; Technical Corrigendum 1) |
| ISO 11925-3-1997 |
防火試驗的反作用.受火焰直接熏烤的建筑產品的可燃性.第3部分:多個火焰源試驗 |
Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame - Part 3: Multi-source test |
| ISO 11926-1-1995 |
通用和流體動力的連接器.有ISO 725 英制螺紋和O型密封環的螺孔和雙端螺栓.第1部分:削頂房的O型密封環的螺孔 |
(Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 1: Ports with O-ring seal in truncated housing) |
| ISO 11926-2-1995 |
通用和流體動力的連接器.有ISO 725 英制螺紋和O型密封環的螺孔和雙端螺栓.第2部分:重型(S 系列)雙端螺栓 |
(Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 2: Heavy-duty (S series) stud ends) |
| ISO 11926-3-1995 |
通用和流體動力的連接器.有ISO 725 英制螺紋和O型密封環的螺孔和雙端螺栓.第3部分:輕型(L 系列)雙端螺栓 |
(Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 3: Light-duty (L series) stud ends) |
| ISO 11928-1-2000 |
縮微照相.圖解COM記錄器的質量控制.第1部分:試驗框架的特征 |
(Micrographics - Quality control of graphic COM recorders - Part 1: Characteristics of the test frames) |
| ISO 11928-2-2000 |
顯微制圖學.圖解的COM記錄器的質量控制.第2部分:質量標準和控制 |
(Micrographics - Quality control of graphic COM recorders - Part 2: Quality criteria and control) |
| ISO 11929-1-2000 |
電離輻射測量的檢測限值和決定范圍的測定.第1部分:原理和在不考慮樣品處理影響的計數測量法中的應用 |
(Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 1: Fundamentals and application to counting measurements without the influence of sample treatment) |
| ISO 11929-2-2000 |
電離輻射測量的檢測限值和決定范圍的測定.第2部分:原理和在考慮樣品處理影響的計數測量法中的應用 |
(Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 2: Fundamentals and application to counting measurements with the influence of sample treatment) |
| ISO 11929-3-2000 |
電離輻射測量的檢測限值和決定范圍的測定.第3部分:原理和在不考慮樣品處理影響的高分辨率γ射線光譜計數測 |
(Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 3: Fundamentals and application to counting measurements by high resolution gamma spectrometry, without the influence of sample treatment) |
| ISO 11929-4-2001 |
電離輻射測量的檢測限值和決定范圍的測定.第4部分:在沒有樣品處理的影響時用模擬速率計的通過線性刻度測量 |
(Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 4: Fundamentals and application to measurements by use of linear-scale analogue ratemeters, without the influence of sample treatment) |
| ISO 11932-1996 |
被考慮用于再循環、再使用或作為非放射性廢物處理的固體材料的活性測量 |
(Activity measurements of solid materials considered for recycling, re-use, or disposal as non-radioactive waste) |
| ISO 11933-1-1997 |
密封罩用組件.第1部分:手套/布袋口,手套/布袋蓋,密封環和互換部件 |
(Components for containment enclosures - Part 1: Glove/bag ports, bungs for glove/bag ports, enclosure rings and interchangeable units) |
| ISO 11933-2-1997 |
密封罩用組件.第2部分:機械手和遙控操作抓手用手套,焊接袋,鞋罩 |
(Components for containment enclosures - Part 2: Gloves, welded bags, gaiters for remote-handling tongs and for manipulators) |
| ISO 11933-3-1998 |
密封罩用組件.第3部分:光面門用傳送系統、氣閘室、雙開門用傳送系統和廢鼓形容器的密封連接 |
(Components for containment enclosures - Part 3: Transfer systems such as plain doors, airlock chambers, double door transfer systems, leaktight connections for waste drums) |
| ISO 11933-4-2001 |
密封罩用組件.第4部分:通風和氣體清潔系統(如,過濾器和疏水閥)的安全和規定.閥門、控制和保護裝置 |
(Components for containment enclosures - Part 4: Ventilation and gas-cleaning systems such as filters, traps, safety and regulation valves, control and protection devices) |
| ISO 11933-5-2001 |
密封罩用組件.第5部分:電路和液壓管路的滲透性 |
(Components for containment enclosures - Part 5: Penetrations for electrical and fluid circuits) |
| ISO 11940-1998 |
信息和文獻工作.泰國字母的譯音 |
(Information and documentation - Transliteration of Thai) |
| ISO 11943-1999 |
液壓動力.液體在線自動顆粒計數系統.校正和合法性方法 |
(Hydraulic fluid power - On-line automatic particle-counting systems for liquids - Methods of calibration and validation) |
| ISO 11948-1-1996 |
小便吸收裝置.第1部分:整品檢驗 |
(Urine-absorbing aids - Part 1: Whole-product testing) |
| ISO 11948-2-1998 |
小便吸收裝置.第2部分:輕度不能自制與低壓條件下短時間液體釋放(泄漏)的測定 |
(Urine-absorbing aids - Part 2: Determination of short-time liquid release (leakage) under conditions of light incontinence and low pressure) |
| ISO 11949-1995 |
冷軋電解馬口鐵 |
(Cold-reduced electrolytic tinplate) |
| ISO 11950-1995 |
冷軋電解鉻/氧化鉻涂層鋼 |
(Cold-reduced electrolytic chromium/chromium oxide-coated steel) |
| ISO 11951-1995 |
鍍錫薄鋼板或電解鉻/鍍氧化鉻鋼生產用卷繞形冷軋黑鋼板 |
(Cold-reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide-coated steel) |
| ISO 11957-1996 |
聲學.客艙隔音功能的測定.實驗室和現場測量 |
(Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements) |
| ISO 11960 Technical Corrigendum 1-2002 |
石油和天然氣工業.油井套管或油管用鋼管.技術勘誤1 |
(Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells; Technical Corrigendum 1) |
| ISO 11960-2001 |
石油和天然氣工業.油井套管和油管用鋼管 |
(Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells) |
| ISO 11960-2004 |
石油和天然氣工業.油井套管和油管用鋼管 |
|
| ISO 11961-1996 |
石油和天然氣工業.鉆井桿用鋼管規范 |
(Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification) |
| ISO 11962-2002 |
縮微照相.帶16mm和35mm縮微膠卷用成象標記(雷達顯示的影像) |
(Micrographics - Image mark (blip) used with 16 mm and 35 mm roll microfilm) |
| ISO 11963-1995 |
塑料.聚碳酸酯薄板材的類型、尺寸和特性 |
(Plastics - Polycarbonate sheets - Types, dimensions and characteristics) |
| ISO 11969-1996 |
水質.砷的測定.原子吸收分光光度法(氫化技術) |
(Water quality - Determination of arsenic - Atomic absorption spectrometric method (hydride technique)) |
| ISO 11970-2001 |
鋼鑄件產品焊接的焊接程序的驗收和規范 |
(Specification and approval of welding procedures for production welding of steel castings) |
| ISO 11971-1997 |
鋼制鑄件表觀質量的外觀檢查 |
(Visual examination of surface quality of steel castings) |
| ISO 11972-1998 |
普通耐腐蝕鑄鋼 |
(Corrosion-resistant cast steels for general applications) |
| ISO 11973-1999 |
一般用途熱阻鑄造鋼及合金 |
(Heat-resistance cast steels and alloys for general applications) |
| ISO 11978-2000 |
眼科光學.接觸鏡片和接觸鏡片維護產品.制造商提供的信息 |
(Ophthalmic optics - Contact lenses and contact lens care products - Information supplied by the manufacturer) |
| ISO 11979-1-1999 |
眼科植入物.眼內晶狀體.第1部分:詞匯 |
(Opthalmic implants - Intraocular lenses - Part 1: Vocabulary) |
| ISO 11979-2 Technical Corrigendum 1-2003 |
眼科植入物.眼內透鏡.第2部分:光學特性和測試方法.技術勘誤1 |
|
| ISO 11979-2 Technical Corrigendum 1-2003 |
眼科植入物.眼內透鏡.第2部分:光學特性和測試方法.技術勘誤1 |
|
| ISO 11979-2-1999 |
眼科植入.眼內鏡片.第2部分:光學特性和試驗方法 |
(Ophthalmic implants - Intraocular lenses - Part 2: Optical properties and test methods) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com