標準號 |
中文名稱 |
英文名稱 |
| BS DD ISO/TS 22559-1-2004 |
升降機(電梯)的安全要求.升降機(電梯)全球安全要求(GESRs) |
|
| BS DD ISO/TS 23081-1-2004 |
信息和文獻工作.記錄管理過程.記錄用數據.原則 |
|
| BS DD ISO/TS 3632-1-2003 |
藏紅花.規范 |
(Saffron (Crocus sativus L.) - Specification) |
| BS DD ISO/TS 3632-2-2003 |
藏紅花.試驗方法 |
(Saffron (Crocus sativus L.) - Test methods) |
| BS EN ISO 1-2002 |
產品幾何量技術規范(GPS).產品幾何量技術規范和驗收的標準溫度 |
(Geometrical Product Specifications (GPS) - Standard reference temperature for geometrical product specification and verification) |
| BS EN ISO 10012-2003 |
測量管理系統.測量方法和測量設備的要求 |
(Measurement management systems - Requirements for measurement processes and measuring equipment) |
| BS EN ISO 10058-1996 |
菱美礦和白云石.化學分析 |
(Magnesites and dolomites - Chemical analysis) |
| BS EN ISO 10062-1992 |
在人工環境中,極低濃度污染氣候(對物質)腐蝕程度的試驗 |
(Corrosion test in artificial atmospheres at very low concentrations of polluting gas(es)) |
| BS EN ISO 10066-1998 |
軟泡沫塑料聚合材料.壓縮蠕變的測定 |
(Flexible cellular polymeric materials - Determination of creep in compression) |
| BS EN ISO 10075-1-2000 |
有關腦力工作負荷的人類工效學原理.一般術語和定義 |
(Ergonomic principles related to mental workload - General terms and definitions (ISO 10075:1991)) |
| BS EN ISO 10075-2-2000 |
有關腦力勞動負荷的人類工效學原理.設計原理 |
(Ergonomic principles related to mental workload - Design principles) |
| BS EN ISO 10075-3-2004 |
與心理負荷相關的人類工效學原理.心理負荷測量和評估方法的準則和要求 |
|
| BS EN ISO 10075-3-2004 |
與心理負荷相關的人類工效學原理.心理負荷測量和評估方法的準則和要求 |
|
| BS EN ISO 10077-1-2000 |
門窗和遮板的熱性能.熱傳遞系數的計算.簡化法 |
(Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Simplified method) |
| BS EN ISO 10077-2-2003 |
門、窗和百葉窗的熱性能.熱傳遞系數的計算.框架的數值法 |
(Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Numerical method for frames) |
| BS EN ISO 10079-1-2000 |
醫用吸引設備.電驅動吸引設備.安全要求 |
(Medical suction equipment - Electrically powered suction equipment - Safety requirements) |
| BS EN ISO 10079-2-2000 |
醫療吸引設備.手動吸引設備 |
(Medical suction equipment - Manually powered suction equipment) |
| BS EN ISO 10079-3-2000 |
醫療吸引設備.真空或壓力吸引設備 |
(Medical suction equipment - Suction equipment powered from a vacuum or pressure source) |
| BS EN ISO 10082-2000 |
塑料.酚醛樹脂.分類和試驗方法 |
(Plastics - Phenolic resins - Classification and test methods) |
| BS EN ISO 10087-1996 |
小型船舶.船體鑒定.編碼體系 |
(Small craft - Hull identification - Coding system) |
| BS EN ISO 10088-2001 |
小型船舶.固定安裝的燃料系統和固定的燃料箱 |
(Small craft - Permanently installed fuel systems and fixed fuel tanks) |
| BS EN ISO 10093-1999 |
塑料.燃燒試驗.標準火源 |
(Plastics - Fire tests - Standard ignition sources) |
| BS EN ISO 10101-1-1994 |
天然氣.卡爾費瑟法測定水含量.說明 |
(Natural gas - Determination of water by the Karl Fischer method - Introduction) |
| BS EN ISO 10101-2-1994 |
天然氣.卡爾費瑟法測定水含量.滴定程序 |
(Natural gas - Determination of water by the Karl Fischer method - Titration procedure) |
| BS EN ISO 10101-3-1994 |
天然氣.卡爾費瑟法測定水含量.庫侖分析程序 |
(Natural gas - Determination of water by the Karl Fischer method - Coulometric procedure) |
| BS EN ISO 10111-2002 |
金屬和其它無機覆層.單位面積質量的測量.重量法和化學分析方法概述 |
(Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods) |
| BS EN ISO 10133-2001 |
小型飛機.電力系統.超低電壓直流電力設備 |
(Small craft - Electrical systems - Extra-low-voltage d.c. installations) |
| BS EN ISO 10139-2-2001 |
牙科學.可摘義齒用柔軟線性材料.長時間使用的材料 |
(Dentistry - Soft lining materials for removable dentures - Materials for long-term use) |
| BS EN ISO 10209-2-1996 |
技術產品文獻加工.詞匯.第2部分:有關投射方法的術語 |
(Technical product documentation - Vocabulary - Terms relating to projection methods) |
| BS EN ISO 10211-1-1996 |
高層建筑中的熱橋.熱流和表面溫度.第1部分:一般計算方法 |
(Thermal bridges in building construction - Heat flows and surface temperatures - General calculation methods) |
| BS EN ISO 10211-2-2001 |
建筑結構中的熱橋.熱流和表面溫度.線性熱橋 |
(Thermal bridges in building construction - Heat flows and surface temperatures - Linear thermal bridges) |
| BS EN ISO 10239-2000 |
小艇.液化石油氣(LPG)系統 |
(Small craft - Liquified petroleum gas (LPG) systems) |
| BS EN ISO 10240-1996 |
小型飛機.機長手冊 |
(Small craft - Owner’s manual) |
| BS EN ISO 10240-2004 |
小艇.艇主手冊 |
|
| BS EN ISO 10253-1998 |
水質.用有中脈的骨條藻屬和有三突的褐指藻屬進行的海底藻類生長限制試驗 |
(Water quality - Marine algal growth inhibition test with Skeletonema costatum and Phaeodactylum tricornutum) |
| BS EN ISO 10256-2003 |
冰球運動員用頭部和面部的保護裝置 |
(Head and face protection for use in ice hockey) |
| BS EN ISO 10271-2001 |
牙科金屬材料.腐蝕試驗方法 |
(Dental metallic materials - Corrosion test methods) |
| BS EN ISO 10273-2003 |
食品和動物飼料的微生物學.偽結腸耶爾森氏結腸桿菌病源檢測的水平法 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the detection of presumptive pathogenic Yersinia enterocolitica) |
| BS EN ISO 10280-1991 |
鋼和鐵.鈦含量測定.二安替比林基代甲烷分光光度法 |
(Steel and iron - Determination of titanium content - Diantipyrylmethane spectrophotometric method) |
| BS EN ISO 10289-2001 |
在金屬襯底上金屬和其它無機覆層的腐蝕試驗的方法.用于腐蝕試驗的試驗樣品和生產產品的分級 |
(Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates - Rating of test specimens and manufactured articles subjected to corrosion tests) |
| BS EN ISO 10301-1997 |
水質.高活性鹵化烴的測定.氣相色譜法 |
(Water quality - Determination of highly volatile halogenated hydrocarbons - Gas-chromatographic methods) |
| BS EN ISO 10303-210-2002 |
工業自動化系統和集成.產品數據表示和信息交流.應用協議.電子組裝、互連和包裝設計 |
(Industrial automation systems and integration - Product data representation and exchange - Application protocol - Electronic assembly, interconnection, and packaging design) |
| BS EN ISO 10304-1-1995 |
水質.使用離子液相色譜法測量可溶解氟化物、氯化物、亞硝酸鹽、正磷酸鹽、溴化物、硝酸鹽和硫酸離子.低污染 |
(Water quality - Determination of dissolved anions by liquid chromatography of ions - Determination of fluoride, chloride, nitrite, orthophosphate, bromide, nitrate and sulfate ions - Method for water) |
| BS EN ISO 10304-2-1997 |
水的質量.用液態離子色譜法測定已溶解的陰離子.第2部分:在廢水中溴化物、氟化物、硝酸鹽、亞硝酸鹽、亞磷酸 |
(Water quality - Determination of dissolved anions by liquid chromatography of ions - Determination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water) |
| BS EN ISO 10304-3-1997 |
水質.用液態離子色譜法測定已溶解的陰離子.第3部分:鉻酸鹽、碘化物、亞硫酸鹽、硫氰酸鹽和硫代硫酸酯的測定 |
(Water quality - Determination of dissolved anions by liquid chromatography of ions - Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate) |
| BS EN ISO 10304-4-2000 |
水質.液態離子色譜法對非溶解陰離子的測定.低污染水中溶解氯酸鹽、氯化物和亞氯酸鹽的測定 |
(Water quality - Determination of dissolved anions by liquid chromatography of ions - Determination of dissolved chlorate, chloride and chlorite in water with low contamination) |
| BS EN ISO 10306-1995 |
紡織品.棉纖維成熟度的空氣流動法評定 |
(Textiles - Cotton fibres - Evaluation of maturity by the air flow method) |
| BS EN ISO 10308-1997 |
金屬覆層.孔隙率檢驗復審 |
(Metallic coatings - Review of porosity tests) |
| BS EN ISO 10318-2005 |
土工合成織物.術語和定義 |
|
| BS EN ISO 10319-1996 |
土工織物.大寬度拉伸試驗 |
Geotextiles - Wide-width tensile test |
| BS EN ISO 10320-1999 |
土工織物和土工織物相關產品.現場識別 |
Geotextiles and geotextile-related products - Identification on site |
| BS EN ISO 10321-1996 |
土工織物.用大寬度法測定接頭/接縫處的拉伸試驗 |
(Geotextiles - Tensile test for joints/seams by wide-width method) |
| BS EN ISO 10322-1-1996 |
眼科光學.半成品眼鏡坯.單光透鏡毛坯和多焦透鏡坯規范 |
(Ophthalmic optics - Semi-finished spectacle lens blanks - Specifications for single-vision and multifocal lens blanks) |
| BS EN ISO 10322-2-1996 |
眼科光學.半成品眼鏡鏡坯.漸變眼鏡毛坯規范 |
(Ophthalmic optics - Semi-finished spectacle lens blanks - Specifications for progressive power lens blanks) |
| BS EN ISO 10323-1996 |
牙科用旋轉器械.盤片和輪的內徑 |
(Dental rotary instruments - Bore diameters for discs and wheels) |
| BS EN ISO 10338-1998 |
光學和光學儀器.接觸鏡片.曲率測定 |
(Optics and optical instruments - Contact lenses - Determination of curvature) |
| BS EN ISO 10340-1997 |
光學和光學儀器.接觸鏡片.溶劑可萃取物質的測定方法 |
(Optics and optical instruments - Contact lenses - Method for determination of solvent extractable substances) |
| BS EN ISO 10342-2003 |
眼科儀器.眼睛折射計 |
(Ophthalmic instruments - Eye refractometers) |
| BS EN ISO 10344-1998 |
光學及光學儀器.接觸鏡片.接觸鏡片試驗用含鹽溶液 |
(Optics and optical instruments - Contact lenses - Saline solution for contact lens testing) |
| BS EN ISO 10350-1-2001 |
塑料.可比單點數據的采集和表示法.模塑材料 |
(Plastics - Acquisition and presentation of comparable single-point data - Moulding materials) |
| BS EN ISO 10350-2-2001 |
塑料.可比單點數據的采集和表示法.第2部分:長纖維增強塑料 |
(Plastics - Acquisition and presentation of comparable single-point data - Long-fibre-reinforced plastic) |
| BS EN ISO 10352-1997 |
纖維增強塑料.模制化合物和聚酯膠片.單位面積質量的測定 |
(Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area) |
| BS EN ISO 10360-1-2001 |
幾何產品規范(GPS).坐標式測量設備(CMM)的驗收和再鑒定.詞匯 |
(Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Vocabulary) |
| BS EN ISO 10360-2-2002 |
產品幾何量技術規范(GPS).坐標式測量設備(CMM)的驗收和再鑒定試驗.測量尺寸用坐標式測量設備 |
(Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - CMMs used for measuring size) |
| BS EN ISO 10360-3-2001 |
幾何產品規范(GPS).坐標式測量設備(CMM)的驗收和再鑒定.旋轉臺的軸線作為第四條軸線的坐標式測量儀器 |
(Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - CMMs with the axis of the rotary table as the fourth axis) |
| BS EN ISO 10360-4-2001 |
幾何產品規范(GPS).坐標式測量設備(CMM)的驗收和再鑒定.用于掃描測量模式的坐標式測量儀器 |
(Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - CMMs used in scanning measuring mode) |
| BS EN ISO 10360-5-2001 |
幾何產品規范(GPS).坐標式測量設備(CMM)的驗收和再鑒定.帶多針尖探測系統的坐標式測量設備 |
(Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - CMMs using multiple stylus probing systems) |
| BS EN ISO 10360-6-2002 |
產品幾何量技術規范(GPS).坐標測量機(CMM)的驗收和復檢試驗.計算高斯相關特性誤差的估計 |
(Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Estimation of errors in computing Gaussian associated features) |
| BS EN ISO 10363-1995 |
熱熔粘膠劑.熱穩定性測定 |
Hot-melt adhesives - Determination of thermal stability |
| BS EN ISO 10365-1995 |
粘合劑.主要失效型式的名稱與符號 |
(Adhesives - Designation of main failure patterns) |
| BS EN ISO 10366-1-2002 |
塑料.甲基丙烯酸甲酯/丁二烯/苯乙烯共聚物(ABS)的模塑和壓塑材料.名稱和符號系統和規范基礎 |
(Plastics - Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials - Designation system and basis for specifications) |
| BS EN ISO 10366-2-2004 |
塑料.甲基丙烯酸甲酯/丙烯腈/丁二烯/苯乙烯模塑和擠塑材料.試樣制備和性能測定 |
|
| BS EN ISO 10366-2-2004 |
塑料.甲基丙烯酸甲酯/丙烯腈/丁二烯/苯乙烯模塑和擠塑材料.試樣制備和性能測定 |
|
| BS EN ISO 10370-1996 |
石油產品.碳渣的測定.微米法 |
Petroleum products - Determination of carbon residue - Micro method |
| BS EN ISO 10374-1995 |
貨運集裝箱.自動識別符 |
Freight containers - Automatic identification |
| BS EN ISO 10380-2003 |
管道系統.波紋狀金屬軟管和軟管組件 |
(Pipework - Corrugated metal hoses and hose assemblies) |
| BS EN ISO 10417-2004 |
石油和天然氣工業.井下安全閥系統.設計、安裝、操作和矯正 |
|
| BS EN ISO 10418-2003 |
石油和天然氣工業.近海生產裝置.基礎表面操作安全系統 |
(Petroleum and natural gas industries - Offshore production installations - Basic surface process safety systems) |
| BS EN ISO 10423-2001 |
石油和天然氣工業.鉆井和開采設備.井口設施和采油樹設備 |
Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment |
| BS EN ISO 10423-2004 |
石油和天然氣工業.鉆井和開采設備.井口設施和采油樹設備(CD-ROM) |
|
| BS EN ISO 10423-2004 |
石油和天然氣工業.鉆井和開采設備.井口設施和采油樹設備 |
|
| BS EN ISO 10424-1-2004 |
石油和天然氣工業.旋轉鉆探設備.旋轉鉆桿構件 |
|
| BS EN ISO 10426-1-2000 |
石油和天然氣工業.固井用水泥和材料.規范 |
Petroleum and natural gas industries - Cements and materials for well cementing - Specification |
| BS EN ISO 10426-2-2004 |
石油和天然氣工業.油井固井用水泥和材料.油井用水泥的試驗 |
|
| BS EN ISO 10426-2-2004 |
石油和天然氣工業.油井固井用水泥和材料.油井用水泥的試驗 |
|
| BS EN ISO 10426-4-2005 |
石油和天然氣工業.油井固井用水泥和材料.在大氣壓力下泡沫水泥漿的制備和試驗 |
|
| BS EN ISO 10427-1-2002 |
石油和天然氣工業.套管扶正器.弓形彈簧套管扶正器 |
(Petroleum and natural gas industries - Casing centralizers - Bow-spring casing centralizers) |
| BS EN ISO 10427-2-2004 |
石油和天然氣工業.套管扶正器.扶正器的放置和限動環的檢測 |
|
| BS EN ISO 10427-2-2004 |
石油和天然氣工業.良好膠結設備.扶正器的放置和限動環的檢測 |
|
| BS EN ISO 10427-2-2004 |
石油和天然氣工業.良好膠結設備.扶正器的放置和限動環的檢測 |
|
| BS EN ISO 10427-3-2004 |
石油和天然氣工業.固井用設備.浮動式固井設備的性能試驗 |
|
| BS EN ISO 1043-1-2002 |
塑料.符號和縮略語.基本聚合物及其特性 |
(Plastics - Symbols and abbreviated terms - Basic polymers and their special characteristics) |
| BS EN ISO 1043-3-1999 |
塑料.符號和縮略語.增塑劑 |
(Plastics - Symbols and abbreviated terms - Plasticizers) |
| BS EN ISO 1043-4-1999 |
塑料.符號和縮略語.阻燃劑 |
Plastics - Symbols and abbreviated terms - Flame retardants |
| BS EN ISO 10432-2000 |
石油和天燃?xì)夤I(yè).下井設備.地下安全閥設備 |
(Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment) |
| BS EN ISO 10434-2004 |
石油、石化和相關工業用螺栓帽狀鋼閘閥 |
|
| BS EN ISO 10437-2003 |
石油、石油化學和天然氣工業.專用汽輪機設備 |
(Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications) |
| BS EN ISO 10438-4-2004 |
石油、石化和天然氣工業.潤滑、油封、控油系統和輔助裝置.自動氣封支撐系統 |
|
| BS EN ISO 10438-4-2004 |
石油、石化和天然氣工業.潤滑、油封、控油系統和輔助裝置.自動氣封支撐系統 |
|
| BS EN ISO 10439-2002 |
石油、化學和氣體工業.離心壓縮機 |
(Petroleum, chemical and gas service industries - Centrifugal compressors) |
| BS EN ISO 10440-1-2001 |
石油和天然氣工業.轉式容積式壓縮機.過程壓縮機(無油) |
(Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Process compressors (oil-free)) |
| BS EN ISO 10440-2-2002 |
石油和天然氣工業.旋轉型容積式壓縮機.封裝的空氣壓縮機(無油) |
(Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Packaged air compressors (oil-free)) |
| BS EN ISO 10441-1999 |
石油和天然氣工業.機械動力傳輸用撓性聯軸器.專用設施 |
(Petroleum and natural gas industries - Flexible couplings for mechanical power transmission - Special purpose applications) |
| BS EN ISO 10442-2003 |
石油、化學和氣體工業.組合式一體傳動離心空氣壓縮機 |
(Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors) |
| BS EN ISO 10451-2002 |
牙科植入系統.技術文件內容 |
(Dental implant systems - Contents of technical file) |
| BS EN ISO 10456-2000 |
建筑材料和制品.熱值的設計和申報測定的程序 |
Building materials and products - Procedures for determining declared and design thermal values |
| BS EN ISO 10472-1-1998 |
工業洗滌機械的安全要求.第1部分:常規要求 |
Safety requirements for industrial laundry machinery - Common requirements |
| BS EN ISO 10472-2-1998 |
工業洗衣機的安全要求.第2部分:洗衣機和洗衣脫水機 |
(Safety requirements for industrial laundry machinery - Washing machines and washer-extractors) |
| BS EN ISO 10472-3-1998 |
工業洗滌機械的安全要求.第5部分:包括組件機械的洗衣槽線 |
Safety requirements for industrial laundry machinery - Washing tunnel lines including component machines |
| BS EN ISO 10472-4-1998 |
工業洗滌機械的安全要求.第4部分:空氣干燥器 |
Safety requirements for industrial laundry machinery - Air dryers |
| BS EN ISO 10472-5-1998 |
工業洗滌機械的安全要求.第5部分:平板熨衣機,進料機和折疊機 |
Safety requirements for industrial laundry machinery - Flatwork ironers, feeders and folders |
| BS EN ISO 10472-6-1998 |
工業洗滌機械的安全要求.第6部分:熨壓及熔壓 |
Safety requirements for industrial laundry machinery - Ironing and fusing presses |
| BS EN ISO 10477-2004 |
牙科學.高聚物基的牙冠和齒橋材料 |
|
| BS EN ISO 10485-2004 |
螺母錐形保證載荷試驗 |
|
| BS EN ISO 10497-2004 |
閥門試驗.耐火試驗要求 |
|
| BS EN ISO 10497-2004 |
閥門試驗.耐火試驗要求 |
|
| BS EN ISO 105-A01-1996 |
紡織品.染色牢度試驗.試驗一般原理 |
(Textiles - Tests for colour fastness - General principles of testing) |
| BS EN ISO 105-A04-1999 |
紡織品.色牢度試驗.貼襯織物著色度的儀器評定法 |
(Textiles - Tests for colour fastness - Method for the instrumental assessment of the degree of staining of adjacent fabrics) |
| BS EN ISO 105-A05-1997 |
紡織品.染色牢度試驗.第B05部分:色澤變化分級率的測定和儀器評定 |
(Textiles - Tests for colour fastness - Instrumental assessment of change of colour for determination of grey scale rating) |
| BS EN ISO 105-A06-1997 |
紡織品.染色牢度試驗.第A06部分:顏色的1/1標準深度的儀器測定 |
(Textiles - Tests for colour fastness - Instrumental determination of 1/1 standard depth of colour) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com