標準號 |
中文名稱 |
英文名稱 |
| ISO 14508-1997 |
道路車輛.火花塞.電極 |
(Road vehicles - Spark-plugs - Terminals) |
| ISO 14509 AMD 1-2004 |
小艇.動力娛樂艇發出的空氣噪聲的測量.修改件1 |
|
| ISO 14509-2000 |
小型船舶.動力娛樂船排放的空氣噪聲的測定 |
(Small craft - Measurement of airborne sound emitted by powered recreational craft) |
| ISO 14511-2001 |
密封導管中流體流量測量.熱質量流量計 |
(Measurement of fluid flow in closed conduits - Thermal mass flowmeters) |
| ISO 14512-1999 |
客用車.具有裂口摩擦系數的正向前方地面制動系統.開環試驗方法 |
(Passenger cars - Straight-ahead braking on surfaces with split coefficient of friction - Open-loop test method) |
| ISO 14520-1 Technical Corrigendum 1-2002 |
氣體滅火系統.物理特性和系統設計.第1部分:一般要求.技術勘誤1 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 1: General requirements; Technical Corrigendum 1) |
| ISO 14520-1-2000 |
氣體滅火系統.物理特性和系統設計.第1部分:一般要求 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 1: General requirements) |
| ISO 14520-10-2000 |
氣體滅火系統.物理特性和系統設計.第10部分:HFC 23滅火劑 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 10: HFC 23 extinguishant) |
| ISO 14520-11-2000 |
氣體滅火系統.物理特性和系統設計.第11部分:HFC 236fa滅火劑 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 11: HFC 236fa extinguishant) |
| ISO 14520-12-2000 |
氣體滅火系統.物理特性和系統設計.第12部分:IG-01滅火劑 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 12: IG-01 extinguishant) |
| ISO 14520-13-2000 |
氣體滅火系統.物理特性和系統設計.第13部分:IG-100滅火劑 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 13: IG-100 extinguishant) |
| ISO 14520-14-2000 |
氣體滅火系統.物理特性和系統設計.第14部分:IG-55滅火劑 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 14: IG-55 extinguishant) |
| ISO 14520-15-2000 |
氣體滅火系統.物理特性和系統設計.第15部分:IG-541滅火劑 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 15: IG-541 extinguishant) |
| ISO 14520-2 Technical Corrigendum 1-2001 |
氣體滅火系統.物理特性和系統設計.第2部分:CFI滅火劑.技術勘誤1 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 2: CFl extinguishant; Technical Corrigendum 1) |
| ISO 14520-2-2000 |
氣體滅火系統.物理特性和系統設計.第2部分:CFI滅火劑 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 2: CFl extinguishant) |
| ISO 14520-3-2000 |
氣體滅火系統.物理特性和系統設計.第3部分:FC-2-1-8滅火劑 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 3: FC-2-1-8 extinguishant) |
| ISO 14520-4-2000 |
氣體滅火系統.物理特性和系統設計.第4部分:FC-3-1-10滅火劑 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 4: FC-3-1-10 extinguishant) |
| ISO 14520-6-2000 |
氣體滅火系統.物理特性和系統設計.第6部分:HCFC混合A的滅火劑 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 6: HCFC Blend A extinguishant) |
| ISO 14520-7-2000 |
氣體滅火系統.物理特性和系統設計.第7部分:HCFC 124滅火劑 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 7: HCFC 124 extinguishant) |
| ISO 14520-8-2000 |
氣體滅火系統.物理特性和系統設計.第8部分:HCFC 125滅火劑 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 8: HCFC 125 extinguishant) |
| ISO 14520-9-2000 |
氣體滅火系統.物理特性和系統設計.第9部分:HFC 227ea滅火劑 |
(Gaseous fire-extinguishing systems - Physical properties and system design - Part 9: HFC 227ea extinguishant) |
| ISO 14523-1999 |
攝影術.經加工的照相材料.密封材料的攝影活性試驗 |
(Photography - Processed photographic materials - Photographic activity test for enclosure materials) |
| ISO 14524-1999 |
攝影.電子靜止圖像照相機.測量光電子轉換功能方法 |
(Photography - Electronic still-picture cameras - Methods for measuring opto-electronic conversion functions (OECFs)) |
| ISO 14526-1-1999 |
塑料.酚醛粉末模塑化合物(PF-PMCs).第1部分:名稱與符號系統和規范基礎 |
(Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 1: Designation system and basis for specifications) |
| ISO 14526-2-1999 |
塑料.酚醛粉末模塑化合物(PF-PMCs).第2部分:試驗樣品的準備和特性的測定 |
(Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties) |
| ISO 14526-3-1999 |
塑料.酚醛粉末模塑化合物(PF-PMCs).第3部分:對所選模塑化合物的要求 |
(Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 3: Requirements for selected moulding compounds) |
| ISO 14527-1-1999 |
塑料.脲醛和脲/蜜胺酚醛粉末模塑化合物(UF-和UF/MF-PMCs).第1部分:名稱與符號系統和規范基礎 |
(Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 1: Designation system and basis for specifications) |
| ISO 14527-2-1999 |
塑料.脲醛和脲/蜜胺酚醛粉末模塑化合物(UF-和UF/MF-PMCs).第2部分:樣品的準備和特性的測定 |
(Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 2: Preparation of test specimens and determination of properties) |
| ISO 14527-3-1999 |
塑料.脲醛和脲/蜜胺酚醛粉末模塑化合物(UF-和UF/MF-PMCs).第3部分:對所選的模塑化合物的要求 |
(Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 3: Requirements for selected moulding compounds) |
| ISO 14528-1-1999 |
塑料.蜜胺酚醛粉末模塑化合物(MF-PMCs).第1部分:名稱與符號系統和規范基礎 |
(Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 1: Designation system and basis for specifications) |
| ISO 14528-2-1999 |
塑料.蜜胺酚醛粉末模塑化合物(MF-PMCs).第2部分:試驗樣品的準備和特性的測定 |
(Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 2: Preparation of test specimens and determination of properties) |
| ISO 14528-3-1999 |
塑料.蜜胺酚醛粉末模塑化合物(MF-PMCs).第3部分:對所選擇的模塑化合物的要求 |
(Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 3: Requirements for selected moulding compounds) |
| ISO 14529-1-1999 |
塑料.蜜胺/苯酚粉末模塑化合物(MP-PMCs).第1部分:名稱與符號系統和規范基礎 |
(Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 1: Designation system and basis for specifications) |
| ISO 14529-2-1999 |
塑料.蜜胺/苯酚粉末模塑化合物(MP-PMCs).第2部分:試樣的制備和特性的測定 |
(Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 2: Preparation of test specimens and determination of properties) |
| ISO 14529-3-1999 |
塑料.蜜胺/苯酚粉末模塑化合物(MP-PMCs).第3部分:對選定的模塑化合物的要求 |
(Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 3: Requirements for selected moulding compounds) |
| ISO 14530-1-1999 |
塑料.不飽和聚酯粉末模塑化合物(UP-PMCs).第1部分:名稱與符號系統和規范基礎 |
(Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 1: Designation system and basis for specifications) |
| ISO 14530-2-1999 |
塑料.不飽和聚酯粉末模塑化合物(UP-PMCs).第2部分:試樣的制備和特性的測定 |
(Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties) |
| ISO 14530-3-1999 |
塑料.不飽和聚酯粉末模塑化合物(UP-PMCs).第3部分:對所選定的模塑化合物的要求 |
(Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 3: Requirements for selected moulding compounds) |
| ISO 14531-1-2002 |
塑料管道和配件.氣體燃料運輸用交聯聚乙烯管道系統.米制系列.第1部分:管 |
(Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels; Metric series; Specifications - Part 1: Pipes) |
| ISO 14531-2-2004 |
塑料管道和配件.氣體燃料運輸用交聯聚乙烯管道系統.米制系列.規范.第2部分:熱熔連接用配件 |
|
| ISO 14532-2001 |
天然氣.詞匯 |
(Natural gas - Vocabulary) |
| ISO 14534-2002 |
眼科光學.隱形眼鏡和接觸透鏡保護產品.基本要求 |
(Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements) |
| ISO 14535-2001 |
攝影.電子掃描儀、成像膠片和膠卷的室光負載包裝件.尺寸和有關要求 |
(Photography - Room-light loading packages for electronic scanners and image-setting film and paper rolls - Dimensions and related requirements) |
| ISO 14539-2000 |
操作工業機器人.帶抓爪的物料搬運.詞匯和特征表示 |
(Manipulating industrial robots - Object handling with grasp-type grippers - Vocabulary and presentation of characteristics) |
| ISO 14546-2000 |
攝影術.航空攝影膠片和卷軸.尺寸 |
(Photography - Aerial films and spools - Dimensions) |
| ISO 14548-1998 |
攝影.玻璃板的尺寸 |
(Photography - Dimensions of glass plates) |
| ISO 14554-1-2000 |
焊接質量要求.金屬材料的電阻焊接.第1部分:綜合質量要求 |
(Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements) |
| ISO 14554-2-2000 |
焊接質量要求.金屬材料的電阻焊接.第2部分:基本質量要求 |
(Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements) |
| ISO 14555-1998 |
焊接.金屬材料的電弧螺栓焊接 |
(Welding - Arc stud welding of metallic materials) |
| ISO 14556-2000 |
鋼.卻貝V形切痕擺式?jīng)_擊試驗.儀器試驗法 |
(Steel - Charpy V-notch pendulum impact test - Instrumented test method) |
| ISO 14557-2002 |
消防水龍帶.橡膠和塑料制吸入軟管和軟管組件 |
(Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies) |
| ISO 14558-2000 |
橡膠.用紅外光譜法測定氫化丁腈橡膠的殘留不飽和物 |
(Rubber - Determination of residual unsaturation of hydrogenated nitrile rubber (HNBR) by infrared spectroscopy) |
| ISO 1456-2003 |
金屬鍍層.鎳加鉻的電鍍層和銅加鎳再加鉻的電鍍層 |
(Metallic coatings - Electrodeposited coatings of nickel plus chromium and of copper plus nickel plus chromium) |
| ISO 1456-2003 |
金屬鍍層.鎳加鉻的電鍍層和銅加鎳再加鉻的電鍍層 |
|
| ISO 14560-2004 |
按屬性驗收取樣規程.每百萬不合格產品中規定的質量等級 |
|
| ISO 14565-2000 |
動物飼料.維生素A含量的測定.使用高性能液相色譜法 |
(Animal feeding stuffs - Determination of vitamin A content - Method using high-performance liquid chromatography) |
| ISO 14572-2001 |
道路車輛.圓型無屏蔽60V和600V多芯鎧裝電纜.基本性能和高性能電纜的試驗方法和要求 |
(Road vehicles - Round, unscreened 60 V and 600 V multicore sheathed cables - Test methods and requirements for basic and high performance cables) |
| ISO 14573-2002 |
軟靴用滑雪板繩帶裝配.要求和試驗方法 |
(Snowboard strap bindings for soft boots - Requirements and test methods) |
| ISO 14577-1-2002 |
金屬材料.硬度和材料參數的儀器壓痕試驗.第1部分:試驗方法 |
(Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method) |
| ISO 14577-2-2002 |
金屬材料.硬度和材料參數的儀器壓痕試驗.第2部分:試驗機的檢定和校準 |
(Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines) |
| ISO 14577-3-2002 |
金屬材料.硬度和材料參數的儀器壓痕試驗.第3部分:硬度標準塊的校準 |
(Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks) |
| ISO 14579-2001 |
圓柱頭內六角螺釘 |
(Hexalobular socket head cap screws) |
| ISO 1458-2002 |
金屬鍍層.鎳的電鍍層 |
(Metallic coatings - Electrodeposited coatings of nickel) |
| ISO 14580 Technical Corrigendum 1-2004 |
內六角圓頭螺釘.技術勘誤1 |
|
| ISO 14580-2001 |
凸頭內六角螺釘 |
(Hexalobular socket cheese head screws) |
| ISO 14583 Technical Corrigendum 1-2004 |
內六角盤頭螺釘.技術勘誤1 |
|
| ISO 14583-2001 |
平頭內六角螺釘 |
(Hexalobular socket pan head screws) |
| ISO 14584-2001 |
沉頭內六角螺釘 |
(Hexalobular socket raised countersunk head screws) |
| ISO 14585 Technical Corrigendum 1-2004 |
六角內孔平頭攻絲螺釘;技術勘誤1 |
|
| ISO 14585-2001 |
平頭內六角攻絲螺釘 |
(Hexalobular socket pan head tapping screws) |
| ISO 14586-2001 |
沉頭內六角攻絲螺釘 |
(Hexalobular socket countersunk head tapping screws) |
| ISO 14587-2001 |
半沉頭(橢圓形)內六角攻絲螺釘 |
(Hexalobular socket raised countersunk (oval) head tapping screws) |
| ISO 14588-2000 |
沉頭鉚釘.術語和定義 |
(Blind rivets - Terminology and definitions) |
| ISO 14589-2000 |
沉頭鉚釘.機械試驗 |
(Blind rivets - Mechanical testing) |
| ISO 14590-1999 |
具有高拉伸強度和改善成型低屈服點的冷軋鋼片 |
(Cold-reduced steel sheet of high tensile strength and low yield point with improved formability) |
| ISO 14592-1-2002 |
水質.評價低濃度時有機化合物有氧生物降解能力.第1部分:地表水或地表水/懸浮質泥沙搖瓶試驗 |
(Water quality - Evaluation of the aerobic biodegradability of organic compounds at low concentrations - Part 1: Shake-flask batch test with surface water or surface water/sediment suspensions) |
| ISO 14592-2-2002 |
水質.評價低濃度時有機化合物有氧生物降解能力.第2部分:附有生物量的連續流動河床模型 |
(Water quality - Evaluation of the aerobic biodegradability of organic compounds at low concentrations - Part 2: Continuous flow river model with attached biomass) |
| ISO 14593-1999 |
水質.含水介質中有機化合物基本好氧生物降解能力的評定.密封容器中無機碳的分析方法(CO2液上氣體試驗) |
(Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Method by analysis of inorganic carbon in sealed vessels (CO headspace test)) |
| ISO 14594-2003 |
微電子束分析.電子探測微觀分析.波長色散光譜學用實驗參數的測定指南 |
(Microbeam analysis - Electron probe microanalysis - Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy) |
| ISO 14594-2003 |
微電子束分析.電子探測微觀分析.波長色散光譜學用實驗參數的測定指南 |
|
| ISO 14595-2003 |
微光束分析.電子探測微量分析.檢定標樣(CRMs)的規范指南 |
(Microbeam analysis - Electron probe microanalysis - Guidelines for the specification of certified reference materials (CRMs)) |
| ISO 14595-2003 |
微光束分析.電子探測微量分析.檢定標樣(CRMs)的規范指南 |
|
| ISO 14596 Technical Corrigendum 1-1999 |
石油產品.硫含量測定.波長色散X射線熒光光譜法.技術勘誤1 |
(Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry; Technical corrigendum 1) |
| ISO 14596-1998 |
石油產品.硫含量測定.波長色散X射線熒光光譜法 |
(Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry) |
| ISO 14597-1997 |
液體燃料檢驗.釩和鎳含量的測定.X射線熒光分析法 |
(Petroleum products - Determination of vanadium and nickel content - Wavelength-dispersive X-ray fluorescence spectrometry) |
| ISO 1460-1992 |
金屬鍍層.鐵類材料的熱浸鍍鋅涂層.用重量測定法測定單位面積重量 |
(Metallic coatings; hot dip galvanized coatings on ferrous materials; gravimetric determination of the mass per unit area) |
| ISO 14602-1998 |
穩定的外科植入物.骨接合術用植入物.特殊要求 |
(Non-active surgical implants - Implants for Osteosynthesis - Particular requirements) |
| ISO 14606-2000 |
表面化學分析.濺射深度剖面測定.作為參考材料的層系統最優化 |
(Surface chemical analysis - Sputter depth profiling - Optimization using layered systems as reference materials) |
| ISO 14607-2002 |
外科植入物.乳房植入物的特殊要求 |
(Implants for surgery - Specific requirements for mammary implants) |
| ISO 1461-1999 |
加工的鋼鐵制品的熱鍍鋅層.規范和試驗方法 |
(Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods) |
| ISO 14612-2004 |
船舶和海上技術.船橋布置和相關設備.船橋的集中和綜合功能的附加要求和指南 |
|
| ISO 14615-1997 |
粘結劑.結構粘結接頭的耐久性.有荷載并暴露在濕度和溫度之下 |
(Adhesives - Durability of structural adhesive joints - Exposure to humidity and temperature under load) |
| ISO 14616-1997 |
塑料.聚乙烯,乙烯共聚物以及它們的混合物的熱可縮薄膜.收縮應力的測定 |
(Plastics - Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures - Determination of shrinkage stress and contraction stress) |
| ISO 14617-1-2002 |
圖表用圖形符號.第1部分:一般信息和索引 |
(Graphical symbols for diagrams - Part 1: General information and indexes) |
| ISO 14617-10-2002 |
圖表用圖形符號.第10部分:液壓變流器 |
(Graphical symbols for diagrams - Part 10: Fluid power converters) |
| ISO 14617-11-2002 |
圖表用圖形符號.第11部分:熱傳遞裝置和熱發電機 |
(Graphical symbols for diagrams - Part 11: Devices for heat transfer and heat engines) |
| ISO 14617-12-2002 |
圖表用圖形符號.第12部分:分離、凈化和混合裝置 |
(Graphical symbols for diagrams - Part 12: Devices for separating, purification and mixing) |
| ISO 14617-13-2004 |
圖表用圖形符號.第13部分:物料加工用裝置 |
|
| ISO 14617-14-2004 |
圖表用圖形符號.第14部分:物料運輸和搬運用裝置 |
|
| ISO 14617-15-2002 |
圖表用圖形符號.第15部分:安裝圖和網絡圖 |
(Graphical symbols for diagrams - Part 15: Installation diagrams and network maps) |
| ISO 14617-2-2002 |
圖表用圖形符號.第2部分:通用符號 |
(Graphical symbols for diagrams - Part 2: Symbols having general application) |
| ISO 14617-3-2002 |
圖表用圖形符號.第3部分:連接件和相關裝置 |
(Graphical symbols for diagrams - Part 3: Connections and related devices) |
| ISO 14617-4-2002 |
圖表用圖形符號.第4部分:傳動裝置和相關裝置 |
(Graphical symbols for diagrams - Part 4: Actuators and related devices) |
| ISO 14617-5-2002 |
圖表用圖形符號.第5部分:測量和控制裝置 |
(Graphical symbols for diagrams - Part 5: Measurement and control deivices) |
| ISO 14617-6-2002 |
圖表用圖形符號.第6部分:測量和控制功能 |
(Graphical symbols for diagrams - Part 6: Measurement and control functions) |
| ISO 14617-7-2002 |
圖表用圖形符號.第7部分:基本機械組件 |
(Graphical symbols for diagrams - Part 7: Basic mechanical components) |
| ISO 14617-8-2002 |
圖表用圖形符號.第8部分:閥門和氣流調節器 |
(Graphical symbols for diagrams - Part 8: Valves and dampers) |
| ISO 14617-9-2002 |
圖表用圖形符號.第9部分:泵、壓縮機和風扇 |
(Grahical symbols for diagrams - Part 9: Pumps, compressors and fans) |
| ISO 14619-2003 |
航天系統.空間實驗.一般要求 |
(Space systems - Space experiments - General requirements) |
| ISO 14619-2003 |
航天系統.空間實驗.一般要求 |
|
| ISO 14620-1-2002 |
航天系統.安全要求.第1部分:系統安全 |
(Space systems - Safety requirements - Part 1: System safety) |
| ISO 14620-2-2000 |
空間系統.安全要求.第2部分:發射場操作 |
(Space systems-- Safety requirments - Part 2: Launch site operations) |
| ISO 14621-1-2003 |
航天系統.電氣、電子和電氣機械(EEE)零件.第1部分:零件管理 |
(Space systems - Electrical, electronic and electromechanical (EEE) parts - Part 1: Parts management) |
| ISO 14621-1-2003 |
航天系統.電氣、電子和電氣機械(EEE)零件.第1部分:零件管理 |
|
| ISO 14621-2-2003 |
航天系統.電氣、電子和機電件.第2部分:控制程序要求 |
(Space systems - Electrical, electronic and electromechanical (EEE) parts - Part 2: Control programme requirements) |
| ISO 14621-2-2003 |
航天系統.電氣、電子和機電件.第2部分:控制程序要求 |
|
| ISO 14622-2000 |
航空系統.結構設計.負載和外界感應因素 |
(Space systems - Structural design - Loads and induced environment) |
| ISO 14623-2003 |
航天系統.壓力容器及承壓結構.設計與操作 |
|
| ISO 14624-1-2003 |
航天系統.材料的安全和兼容性.第1部分:材料向上易燃性的測定 |
(Space systems - Safety and compatibility of materials - Part 1: Determination of upward flammability of materials) |
| ISO 14624-1-2003 |
航天系統.材料的安全和兼容性.第1部分:材料向上易燃性的測定 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com