標準號 |
中文名稱 |
英文名稱 |
| DIN EN ISO 17652-3-2003 |
焊接.與焊接及相關工藝有關的工廠底漆的試驗.第3部分:熱切割 |
(Welding - Test for shop primers in relation to welding and allied processes - Part 3: Thermal cutting (ISO 17652-3:2003); German version EN ISO 17652-3:2003) |
| DIN EN ISO 17652-4-2003 |
焊接.與焊接及相關工藝有關的工廠底漆的試驗.第4部分:焊接煙塵和氣體的排放 |
(Welding - Test for shop primers in relation to welding and allied processes - Part 4: Emission of fumes and gases (ISO 17652-4:2003); German version EN ISO 17652-4:2003) |
| DIN EN ISO 17653-2003 |
金屬材料焊縫的破壞檢驗.電阻點焊的扭轉試驗 |
Destructive tests on welds in metallic materials - Torsion test of resistance spot welds (ISO 17653:2003); German version EN ISO 17653:2003 |
| DIN EN ISO 17654-2003 |
金屬材料焊縫的破壞檢驗.電阻焊接.電阻縫焊的壓力試驗 |
Destructive tests on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds (ISO 17654:2003); German version EN ISO 17654:2003 |
| DIN EN ISO 17655-2003 |
金屬材料焊縫的破壞檢驗.δ鐵素體測量用樣品的準備方法 |
Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement (ISO 17655:2003); German version EN ISO 17655:2003 |
| DIN EN ISO 17664-2004 |
醫療設備的消毒.由生產商提供的可再消毒醫療設備的處理過程的信息 |
|
| DIN EN ISO 17693-2005 |
鞋靴.鞋幫的試驗方法.耐磨損性 (ISO 17693-2004); 德文版本 EN ISO 17693-2005 |
|
| DIN EN ISO 17695-2005 |
鞋靴.鞋幫試驗方法.變形性(ISO 17695-2004); 德文版本 EN ISO 17695-2005 |
|
| DIN EN ISO 177-1999 |
塑料.增塑劑擴散的測定 |
Plastics - Determination of migration of plasticizers (ISO 177:1988); German version EN ISO 177:1999 |
| DIN EN ISO 17700-2005 |
鞋靴.鞋幫、鞋襯和鞋內襯試驗方法.耐摩擦色牢度 |
|
| DIN EN ISO 17707-2005 |
鞋靴.外底試驗方法.耐彎性 |
|
| DIN EN ISO 178-1997 |
塑料.彎曲性能測定 |
Plastics - Determination of flexural properties (ISO 178:1993); German version EN ISO 178:1996 |
| DIN EN ISO 178-2003 |
塑料.彎曲性能測定 |
(Plastics - Determination of flexural properties (ISO 178:2001); German version EN ISO 178:2003) |
| DIN EN ISO 17834-2004 |
熱噴鍍.防高溫腐蝕和氧化的涂層 |
(Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures (ISO 17834:2003); German version EN ISO 17834:2003) |
| DIN EN ISO 17834-2004 |
熱噴鍍.防高溫腐蝕和氧化的涂層 |
|
| DIN EN ISO 17836-2005 |
熱噴涂.熱噴涂熔敷效率的測定 |
|
| DIN EN ISO 17895-2005 |
色漆和清漆.低VOC乳化涂料的揮發性有機化合物含量測定 |
|
| DIN EN ISO 17895-2005 |
色漆和清漆.低VOC乳化涂料的揮發性有機化合物含量測定 |
|
| DIN EN ISO 17895-2005 |
色漆和清漆.低VOC乳化涂料的揮發性有機化合物含量測定 |
|
| DIN EN ISO 179-1-2001 |
塑料.擺式?jīng)_擊特性測定.第1部分:非儀器沖擊試驗 |
Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2000); German version EN ISO 179-1:2000 |
| DIN EN ISO 179-2-2000 |
塑料.擺錘式?jīng)_擊特性的測定.第2部分:儀器沖擊試驗 |
Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997); German version EN ISO 179-2:1999 |
| DIN EN ISO 1797-1-1999 |
牙科用旋轉器具.柄.第1部分:金屬柄 |
Dental rotary instruments - Shanks - Part 1: Shanks made of metals (ISO 1797-1:1992 + AMD 1:1997) including Amendment A1:1999; German version EN ISO 1797-1:1995 + A1:1999 |
| DIN EN ISO 1797-2-1995 |
牙科用旋轉器具.柄.第2部分:塑料柄 |
Dental rotary instruments - Shanks - Part 2: Shanks made of plastics (ISO 1797-2:1992); German version EN ISO 1797-2:1995 |
| DIN EN ISO 1798-2000 |
柔性泡沫聚合材料.抗拉強度和斷裂時延伸率的測定 |
Flexible cellular polymeric materials - Determination of tensile strength and elongation at break (ISO 1798:1997); German version EN ISO 1798:1999 |
| DIN EN ISO 17993-2004 |
水質.用液-液萃取后的熒光探測高效液相色譜法(HPLC)測定水中的15環芳香烴(PAH) |
|
| DIN EN ISO 17994-2004 |
水質.確定微生物方法之間等效性的標準 |
|
| DIN EN ISO 180-2001 |
塑料.伊兆特(Izod)沖擊強度的測定 |
Plastics - Determination of Izod impact strength (ISO 180:2000); German version EN ISO 180:2000 |
| DIN EN ISO 1806-2003 |
魚網.測定拉網的篩網斷裂力 |
Fishing nets - Determination of mesh breaking force of netting (ISO 1806:2002); German version EN ISO 1806:2002 |
| DIN EN ISO 18064-2005 |
熱塑性彈性體.術語和簡化術語 |
|
| DIN EN ISO 18064-2005 |
熱塑性彈性體.術語和簡化術語 |
|
| DIN EN ISO 18104-2004 |
醫療信息學.護理用參考術語模式的綜合 |
|
| DIN EN ISO 182-2-2000 |
塑料.基于氯乙烯均聚物和共聚物的混合物和制品在高溫時形成 其它酸性制品的趨勢的測定.第2部分:pH值法 |
Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 2: pH method (ISO 182-2:1990); German version |
| DIN EN ISO 182-3-2001 |
塑料.基于氯乙烯均聚物和共聚物的混合物和制品在高溫時形成氯化氫和其它酸性制品的趨勢的測定.第3部分:電導分析法 |
Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 3: Conductometric method (ISO 182-3:1993); Ger |
| DIN EN ISO 182-4-2001 |
塑料.基于氯乙烯均聚物和共聚物的混合物和制品在高溫時形成氯化氫和其它酸性制品的趨勢的測定.第4部分:電位測量法 |
Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 4: Potentiometric method (ISO 182-4:1993); Ger |
| DIN EN ISO 18265-2004 |
金屬材料.硬度值的換算 |
(Metallic materials - Conversion of hardness values (ISO 18265:2003); German version EN ISO 18265:2003) |
| DIN EN ISO 18265-2004 |
金屬材料.硬度值的換算 |
|
| DIN EN ISO 18273-2004 |
焊接消耗品.鋁和鋁合金焊接用焊絲電極、焊絲和焊棒.分類 |
|
| DIN EN ISO 18274-2004 |
焊接消耗品.鎳和鎳合金熔焊用實心焊絲、條和棒材.分類 |
|
| DIN EN ISO 18278-1-2005 |
電阻焊.可焊性.第1部分:金屬材料的電阻點焊、縫焊和凸焊的可焊性評定 |
|
| DIN EN ISO 18278-2-2005 |
電阻焊.可焊性.第2部分:點焊用薄鋼板評定用備用程序 |
|
| DIN EN ISO 18279-2004 |
銅焊.銅焊接頭的缺陷 |
|
| DIN EN ISO 183-1999 |
塑料.著色劑滲色的定性評估 |
Plastics - Qualitative evaluation of the bleeding of colorants (ISO 183:1976); German version EN ISO 183:1999 |
| DIN EN ISO 1854-2000 |
乳清干酪.脂肪含量的測定.重量分析法(參照法) |
Whey cheese - Determination of fat content - Gravimetric method (Reference method) (ISO 1854:1999); German version EN ISO 1854:1999 |
| DIN EN ISO 1856-2001 |
泡沫柔性聚合材料.壓縮變形的測定 |
Flexible cellular polymeric materials - Determination of compression set (ISO 1856:2000); German version EN ISO 1856:2000 |
| DIN EN ISO 186-2002 |
紙和紙板.測定平均質量取樣 |
Paper and board - Sampling to determine average quality (ISO 186:2002); German version EN ISO 186:2002 |
| DIN EN ISO 18609-2002 |
動植物脂肪和油.不皂化物測定.己烷提取法(ISO 18609:2000) |
Animal and vegetable fats and oils - Determination of unsaponifiable matter - Method using hexane extraction (ISO 18609:2000); German version EN ISO 18609:2001 |
| DIN EN ISO 18613-2003 |
木制平托盤的修理 |
(Repair of flat wooden pallets (ISO 18613:2003); German version EN ISO 18613:2003) |
| DIN EN ISO 1872-1-1999 |
塑料.聚乙烯(PE)模塑和擠制材料.第1部分:命名與基礎規范 |
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1872-1:1993); German version EN ISO 1872-1:1999 |
| DIN EN ISO 1872-2-2000 |
塑料.聚乙烯(PE)模塑和擠制材料.第2部分:試樣制備和性能測定 |
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:1997 + AMD 1:2000) (includes Amendment A1:2000); German version EN ISO 1872-2:1997 + A1:2000 |
| DIN EN ISO 1873-1-1995 |
塑料.聚丙烯(PP)模塑和擠塑材料.第1部分:名稱與符號系統和規范基礎 |
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1873-1:1995); German version EN ISO 1873-1:1995 |
| DIN EN ISO 1873-2-2000 |
塑料.聚丙烯(PP)模塑和擠制材料.第2部分:試樣制備和性能測定 |
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:1997 + AMD 1:2000) (includes Amendment A1:2000); German version EN ISO 1873-2:1997 + A1:2000 |
| DIN EN ISO 1874-1-2001 |
塑料.注塑和擠壓用聚酰胺(PA)模塑材料.第1部分:名稱與符號 |
Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation (ISO 1874-1:1992); German version EN ISO 1874-1:2000 |
| DIN EN ISO 1874-2-1996 |
塑料.注塑和擠壓用聚酰胺(PA)模塑材料.第2部分:試樣的制備和性能的測定 |
Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:1995); German version EN ISO 1874-2:1995 |
| DIN EN ISO 18777-2005 |
醫用可移動的液氧裝置.特殊要求 |
|
| DIN EN ISO 18777-2005 |
醫用可移動的液氧裝置.特殊要求 |
|
| DIN EN ISO 18777-2005 |
醫用可移動的液氧裝置.特殊要求 |
|
| DIN EN ISO 18778-2005 |
呼吸設備.嬰兒監視器.特殊要求 |
|
| DIN EN ISO 18778-2005 |
呼吸設備.嬰兒監視器.特殊要求 |
|
| DIN EN ISO 18778-2005 |
呼吸設備.嬰兒監視器.特殊要求 |
|
| DIN EN ISO 18779-2005 |
儲存氧和氧混合物的醫療設備.特殊要求 |
|
| DIN EN ISO 18779-2005 |
儲存氧和氧混合物的醫療設備.特殊要求 |
|
| DIN EN ISO 18779-2005 |
儲存氧和氧混合物的醫療設備.特殊要求 |
|
| DIN EN ISO 18812-2003 |
醫療信息學.臨床分析儀與實驗室信息系統的接口.配置文件的使用 |
(Health informatics - Clinical analyser interfaces to laboratory information systems - Use of profiles (ISO 18812:2003); German version EN ISO 18812:2003, text in English) |
| DIN EN ISO 18856-2005 |
水質.用氣相色譜法/質譜法測定被選鄰苯二甲酸酯 |
|
| DIN EN ISO 1886-1994 |
紡織玻璃纖維.批量纖維取樣法 |
Reinforcement fibres - Sampling plans applicable to received batches (ISO 1886:1990); German version EN ISO 1886:1994 |
| DIN EN ISO 1889-1997 |
增強絲紗.線密度的測定 |
Reinforcement yarns - Determination of linear density (ISO 1889:1997); German version EN ISO 1889:1997 |
| DIN EN ISO 1890-1997 |
加固紗線.轉數測定 |
Reinforcement yarns - Determination of twist (ISO 1890:1997); German version EN ISO 1890:1997 |
| DIN EN ISO 19011-2002 |
質量和/或環境管理體系審核指南 |
Guidelines for quality and/or environmental management systems auditing (ISO 19011:2002); German version EN ISO 19011:2002 |
| DIN EN ISO 19101-2005 |
地理信息.參考模型 |
|
| DIN EN ISO 19105-2005 |
地理信息.符合性及試驗 |
|
| DIN EN ISO 19107-2005 |
地理信息.空間圖解 |
|
| DIN EN ISO 19108-2005 |
地理信息.暫存概要 |
|
| DIN EN ISO 19111-2005 |
地理信息.通過坐標系的空間定位 |
|
| DIN EN ISO 19112-2005 |
地理信息.通過地理標識符的空間定位 |
|
| DIN EN ISO 19113-2005 |
地理信息.質量原則 |
|
| DIN EN ISO 19114-2005 |
地理信息.質量評定過程 |
|
| DIN EN ISO 19115-2005 |
地理信息.數據 |
|
| DIN EN ISO 19219-2004 |
動植物脂肪和油.粗脂肪和原油中可視沉淀物的測定 |
(Animal and vegetable fats and oils - Determination of visible foots in crude fats and oils (ISO 19219:2002); German version EN ISO 19219:2003) |
| DIN EN ISO 19219-2004 |
動植物脂肪和油.粗脂肪和原油中可視沉淀物的測定 |
|
| DIN EN ISO 1923-1995 |
泡沫塑料和橡膠.線性尺寸的測定 |
Cellular plastics and rubbers - Determination of linear dimensions (ISO 1923:1981); German version EN ISO 1923:1995 |
| DIN EN ISO 1924-2-1995 |
紙和紙板.抗張性的測定,第2部分:恒定拉長法 |
Paper and board - Determination of tensile properties - Part 2: Constant rate of elongation method (ISO 1924-2:1994); German version EN ISO 1924-2:1995 |
| DIN EN ISO 1942-5-1994 |
牙科詞匯.第5部分:試驗術語 |
Dental vocabulary - Part 5: Terms associated with testing (ISO 1942-5:1989); German version EN ISO 1942-5:1994 |
| DIN EN ISO 196-1995 |
鍛銅和銅合金.殘余應力的檢測.硝酸汞(1)試驗 |
Wrought copper and copper alloys - Detection of residual stress - Mercury(I)nitrate test (ISO 196:1978); German version EN ISO 196:1995 |
| DIN EN ISO 1969-2005 |
纖維繩索.聚乙烯繩索.3和4股繩索 |
|
| DIN EN ISO 1973-1995 |
紡織品.纖維.細度.重力測量法和振動法 |
Textiles - Determination of linear density - Gravimetric method and vibroscope method (ISO 1973:1995); German version EN ISO 1973:1995 |
| DIN EN ISO 19879-2005 |
液壓傳動和通用金屬管連接.液壓傳動連接的試驗方法 |
|
| DIN EN ISO 19900-2005 |
石油和天然氣工業.近海建筑物的一般要求 |
|
| DIN EN ISO 19900-2005 |
石油和天然氣工業.近海建筑物的一般要求 |
|
| DIN EN ISO 19901-4-2005 |
石油和天然氣工業.近海建筑物的特殊要求.第4部分:土工和地基設計考慮 |
|
| DIN EN ISO 19901-4-2005 |
石油和天然氣工業.近海建筑物的特殊要求.第4部分:土工和地基設計考慮 |
|
| DIN EN ISO 19901-5-2005 |
石油和天然氣工業.近海建筑物的特殊要求.第5部分:設計和施工過程中的重量控制 |
|
| DIN EN ISO 19901-5-2005 |
石油和天然氣工業.近海建筑物的特殊要求.第5部分:設計和施工過程中的重量控制 |
|
| DIN EN ISO 19952-2005 |
鞋靴.詞匯 |
|
| DIN EN ISO 19953-2004 |
鞋靴.鞋跟的試驗方法.耐側面沖擊 |
|
| DIN EN ISO 19956-2004 |
鞋靴.鞋跟的試驗方法.耐疲勞性 |
|
| DIN EN ISO 19957-2004 |
鞋靴.鞋跟的試驗方法.鞋跟釘?shù)谋３至?/td>
| |
| DIN EN ISO 19958-2004 |
鞋靴.鞋跟和頂部的試驗方法.頂部保持力 |
|
| DIN EN ISO 19980-2005 |
眼科儀器.角膜局部解剖儀 |
|
| DIN EN ISO 2009-1994 |
帶槽沉頭螺釘(通用頭).產品等級A |
Slotted countersunk flat head screws (common head style) - Product grade A (ISO 2009:1994); German version EN ISO 2009:1994 |
| DIN EN ISO 2010-1994 |
帶槽半圓頭沉頭螺釘(通用頭).產品等級A |
Slotted raised countersunk head screws (common head style) - Product grade A (ISO 2010:1994); German version EN ISO 2010:1994 |
| DIN EN ISO 20126-2005 |
牙科學.手動牙刷.一般要求和試驗方法.(ISO 20126-2005); 德文版本 EN ISO 20126-2005 |
|
| DIN EN ISO 20127-2005 |
牙科學.電動牙刷.一般要求和試驗方法 |
|
| DIN EN ISO 20200-2005 |
塑料.在實驗室試驗中模擬堆肥處理條件下測定塑料的分解度 |
|
| DIN EN ISO 20344-2004 |
個人防護設備.鞋靴的試驗方法 |
|
| DIN EN ISO 20345-2004 |
個人防護設備.安全鞋靴 |
|
| DIN EN ISO 20346-2004 |
個人防護設備.防護鞋 |
|
| DIN EN ISO 20347-2004 |
個人防護設備.專業鞋 |
|
| DIN EN ISO 2039-1-1996 |
塑料.硬度測定.第1部分:球壓法 |
Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:1993); German version EN ISO 2039-1:1996 |
| DIN EN ISO 2039-1-2003 |
塑料.硬度測定.第1部分:壓球法 |
(Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:2001); German version EN ISO 2039-1:2003) |
| DIN EN ISO 2039-2-2000 |
塑料.硬度的測定.第2部分:洛氏硬度 |
Plastics - Determination of hardness - Part 2: Rockwell hardness (ISO 2039-2:1987); German version EN ISO 2039-2:1999 |
| DIN EN ISO 2060-1995 |
紡織品.筒子紗.線密度(單位長度的質量)的測定.絞紗法 |
Textiles - Yarn from packages - Determination of linear density (mass per unit length) by the skein method (ISO 2060:1994); German version EN ISO 2060:1995 |
| DIN EN ISO 2061-1995 |
紡織品.紗線捻度的測定.直接計數法 |
Textiles - Determination of twist in yarns - Direct counting method (ISO 2061:1995); German version EN ISO 2061:1995 |
| DIN EN ISO 2062 Bb.1-2001 |
紡織品.包裝紗.單端斷裂力和斷裂拉伸的測定.拉伸評價實例 |
Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break; Example for the evaluation of the tensile |
| DIN EN ISO 2062-1995 |
紡織品.卷裝紗.單紗斷裂力和斷裂伸長 |
Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break (ISO 2062:1993); German version EN ISO 2062:1995 |
| DIN EN ISO 20623-2004 |
石油和相關產品.液體的極限壓力和抗磨性能的測定.四球法 |
|
| DIN EN ISO 2063-2005 |
熱噴涂.金屬和其他無機涂層.鋅、鋁及其合金 |
|
| DIN EN ISO 2063-2005 |
熱噴涂.金屬和其他無機涂層.鋅、鋁及其合金 |
|
| DIN EN ISO 2064-2000 |
金屬和其他無機物涂層.有關厚度測量的定義和慣例 |
Metallic and other non-organic coatings - Definitions and conventions concerning the measurement of thickness (ISO 2064:1996); German version EN ISO 2064:2000 |
| DIN EN ISO 20645-2005 |
紡織織物.抗菌活性的測定.瓊脂擴散木片試驗 |
|
| DIN EN ISO 20763-2004 |
石油和相關產品.液壓液耐磨性能的測定.葉片泵法 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com