標準號 |
中文名稱 |
英文名稱 |
| BS EN ISO 13935-2-1999 |
織物.織物和成衣接縫拉伸特性.用夾鉗方法對接縫裂開最大拉力的測定 |
(Textiles - Seam tensile properties of fabrics and made-up textile articles - Determination of maximum force to seam rupture using the grab method) |
| BS EN ISO 13936-1-2004 |
紡織物.機織物中縫合處紗線的抗滑脫性測定.固定接縫打開法 |
|
| BS EN ISO 13936-2-2004 |
紡織品.機織物中縫合處紗線的抗滑脫性測定.固定荷載法 |
|
| BS EN ISO 13937-1-2000 |
紡織材料.織物撕裂特性.用沖擊擺方法測定撕裂力(埃爾門多夫) |
(Textiles - Tear properties of fabrics - Determination of tear force using ballistic pendulum method (Elmendorf)) |
| BS EN ISO 13937-2-2000 |
紡織材料.織物撕裂特性.褲形試樣撕裂力的測定(單撕裂法) |
(Textiles - Tear properties of fabrics - Determination of tear force of trouser-shaped test specimens (single tear method)) |
| BS EN ISO 13937-3-2000 |
紡織材料.織物撕裂特性.翼形試樣撕裂力的測定(單撕裂法) |
(Textiles - Tear properties of fabrics - Determination of tear force of wing-shaped test specimens (single tear method)) |
| BS EN ISO 13937-4-2000 |
紡織材料.織物撕裂特性.舌形試樣撕裂力的測定(雙撕裂法) |
(Textiles - Tear properties of fabrics - Determination of tear force of tongue-shaped test specimens (double tear test)) |
| BS EN ISO 13938-1-1999 |
織物.纖維破碎特性.破碎強度和破碎膨脹測定的液壓方法 |
(Textiles - Bursting properties of fabrics - Hydraulic method for determination of bursting strength and bursting distension) |
| BS EN ISO 13938-2-1999 |
紡織品.纖維破碎特性.對破碎強度和破碎膨脹力的氣動測定方法 |
(Textiles - Bursting properties of fabrics - Pneumatic method for determination of bursting strength and bursting distension) |
| BS EN ISO 13943-2000 |
防火安全.詞匯 |
(Fire safety - Vocabulary) |
| BS EN ISO 13969-2004 |
奶和奶制品.微生物抑制劑試驗的標準化描述指南 |
|
| BS EN ISO 13969-2004 |
奶和奶制品.微生物抑制劑試驗的標準化描述指南 |
|
| BS EN ISO 13982-2-2005 |
防固體顆粒用防護服.測定細粒氣溶膠向服裝內滲漏量的試驗方法 |
|
| BS EN ISO 13995-2001 |
防護服.機械性能.材料抗穿刺性和抗撕裂性測定的試驗方法 |
(Protective clothing - Mechanical properties - Test method for the determination of the resistance to puncture and dynamic tearing of materials) |
| BS EN ISO 13997-1999 |
防護服.機械特性.抗尖銳物切割特性的測定 |
(Protective clothing - Mechanical properties - Determination of resistance to cutting by sharp objects) |
| BS EN ISO 13998-2003 |
防護服.防小折刀切割和刺穿的圍裙、褲子和背心 |
(Protective clothing - Aprons, trousers and vests protecting against cuts and stabs by hand knives) |
| BS EN ISO 140-1-1998 |
聲學.建筑物和建筑構件的隔音測量.第1部分:抑制側向傳輸?shù)膶?shí)驗室試驗裝置的要求 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Requirements for laboratory test facilities with suppressed flanking transmission) |
| BS EN ISO 140-11-2005 |
聲學.建筑物和建筑構件的隔聲測量.輕型標準樓板上地板覆蓋物傳遞沖擊聲音降低的實驗室測量 |
|
| BS EN ISO 140-12-2000 |
聲學.建筑物和建筑構件的隔音測量.活地板的房間對房間空氣和沖擊聲隔絕的實驗室測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Laboratory measurement of room-to-room airborne and impact sound insulation of an access floor) |
| BS EN ISO 140-14-2004 |
聲學.建筑物和建筑構件的隔音測量.第1部分:現場特殊條件下指南 |
|
| BS EN ISO 140-3-1995 |
聲學.建筑物和建筑構件的隔音測量.第3部分:建筑物構件的氣載音響隔離的實驗室測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Laboratory measurement of airborne sound insulation of building elements) |
| BS EN ISO 140-4-1998 |
聲學.建筑物和建筑構件的隔音測量.房間之間氣載聲音隔絕的場測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Field measurements of airborne sound insulation between rooms) |
| BS EN ISO 140-5-1998 |
聲學.建筑物和建筑構件的隔音測量.第5部分:建筑物立面構件及其立面氣載聲音隔離的現場測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Field measurements of airborne sound insulation of facade elements and facades) |
| BS EN ISO 140-6-1998 |
聲學.建筑物和建筑構件的隔音測量.地板沖擊聲隔絕的實驗室測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Laboratory measurements of impact sound insulation of floors) |
| BS EN ISO 140-7-1998 |
聲學.建筑物和建筑構件的隔音測量.地板沖擊聲隔絕的場測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Field measurements of impact sound insulation of floors) |
| BS EN ISO 140-8-1998 |
聲學.建筑物和建筑構件的隔音測量.第8部分:減少對標準地面覆蓋層的撞擊噪音傳播的實驗室測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard fl) |
| BS EN ISO 14001-1996 |
環境管理系統.使用指南規范 |
(Environmental management systems - Specification with guidance for use) |
| BS EN ISO 14001-2004 |
環境管理系統.有使用指南的要求 |
|
| BS EN ISO 1401-2000 |
農業噴霧機用橡膠軟管 |
(Rubber hoses for agricultural spraying) |
| BS EN ISO 1402-1997 |
橡膠和塑料軟管及軟管組件.液壓靜力試驗 |
(Rubber and plastics hoses and hose assemblies - Hydrostatic testing) |
| BS EN ISO 14020-2001 |
環境標簽和聲明.一般原則 |
(Environmental labels and declarations - General principles) |
| BS EN ISO 1403-1996 |
一般水用織物增強橡膠軟管.規范 |
(Rubber hoses, textile-reinforced, for general-purpose water applications - Specification) |
| BS EN ISO 14031-2000 |
環境管理.環境性能評價.導則 |
(Environmental management - Environmental performance evaluation - Guidelines) |
| BS EN ISO 14040-1997 |
環境管理.生命周期評估.原則和框架 |
(Environmental management - Life cycle assessment - Principles and framework) |
| BS EN ISO 14041-1998 |
環境管理.生物圈評價.目標和范圍的定義及資源分析 |
(Environmental management - Life cycle assessment - Goal and scope definition and inventory analysis) |
| BS EN ISO 14042-2000 |
環境管理.生物圈管理.生物圈影響評定 |
(Environmental management - Life cycle management - Life cycle impact assessment) |
| BS EN ISO 14043-2000 |
環境管理.生物圈管理.生物圈解釋 |
(Environmental management - Life cycle assessment - Life cycle interpretation) |
| BS EN ISO 14113-1997 |
氣焊設備.能承受最大檢驗設計氣壓為450巴的壓縮和液化氣用橡膠和塑料軟管組件 |
(Gas welding equipment - Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar) |
| BS EN ISO 14114-1999 |
氣焊設備.焊接,切割和連接過程的乙炔多功能系統.一般要求 |
(Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements) |
| BS EN ISO 14122-1-2001 |
機器安全.機器接近的固定方式.兩種水平之間的固定方式的選擇 |
(Safety of machinery - Permanent means of access to machinery - Choice of a fixed means of access between two levels) |
| BS EN ISO 14122-2-2001 |
機器安全.機器接近的固定方式.工作平臺和通路 |
(Safety of machinery - Permanent means of access to machinery - Working platforms and walkways) |
| BS EN ISO 14122-3-2001 |
機器安全.機器接近的固定方式.樓梯、梯子和護欄 |
(Safety of machinery - Permanent means of access to machinery - Stairways, stepladders and guard-rails) |
| BS EN ISO 14125-1998 |
纖維增強塑料復合材料.撓性性能的測定 |
(Fibre-reinforced plastic composites - Determination of flexural properties) |
| BS EN ISO 14126-1999 |
纖維增強塑料混合物.水平方向壓縮能力的測定 |
(Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction) |
| BS EN ISO 14129-1998 |
纖維增強塑料復合物.用 |
(Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength by the) |
| BS EN ISO 14130-1998 |
纖維增強塑料復合物.短束法對表觀層間剪切強度的測定 |
(Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method) |
| BS EN ISO 14155-1-2003 |
人用醫療設備的臨床調查.一般要求 |
(Clinical investigation of medical devices for human subjects - General requirements) |
| BS EN ISO 14155-2-2003 |
醫學研究受驗者用醫療器械的臨床調查.臨床調查規劃 |
(Clinical investigation of medical devices for human subjects - Clinical investigation plans) |
| BS EN ISO 14159-2004 |
機械安全.機械設計的衛生要求 |
|
| BS EN ISO 14160-1998 |
一次性醫用設備混合動物源材料的消毒.液體消毒液消毒的確認和常規管理 |
(Sterilization of single-use medical devices incorporating materials of animal origin - Validation and routine control of sterilization by liquid chemical sterilants) |
| BS EN ISO 14161-2001 |
醫療保健產品的消毒.生物指示器.結果的選擇、使用和說明用指南 |
(Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results) |
| BS EN ISO 14163-1998 |
聲學.消音器噪聲控制指南 |
(Acoustics - Guidelines for noise control by silencers) |
| BS EN ISO 14182-2000 |
動物飼料.有機磷農藥殘留物的測定.氣相色譜法 |
(Animal feeding stuff - Determination of residues of organophosphorus pesticides - Gas chromatographic method) |
| BS EN ISO 14184-1-1999 |
織物.甲醛的測定.游離的和水解態甲醛(水萃取法) |
(Textiles - Determination of formaldehyde - Free and hydrolyzed formaldehyde (water extraction method)) |
| BS EN ISO 14184-2-1998 |
紡織品.甲醛的測定.釋放的甲醛(蒸氣吸收法) |
(Textiles - Determination of formaldehyde - Released formaldehyde (vapour absorption method)) |
| BS EN ISO 1421-1998 |
橡膠或塑料涂層織物.拉伸強度和斷裂伸長的測定 |
(Rubber-or plastics-coated fabrics - Determination of tensile strength and elongation at break) |
| BS EN ISO 14233-2003 |
牙科學.聚合基模料 |
(Dentistry - Polymer-based die materials) |
| BS EN ISO 14246-2001 |
可移動的氣體鋼瓶.氣體鋼瓶閥門.生產試驗和檢驗 |
(Transportable gas cylinders - Gas cylinder valves - Manufacturing tests and inspections) |
| BS EN ISO 14253-1-1999 |
幾何產品規范(GPS).通過工件測量和測量設備進行檢驗.用規范對一致性或不一致性進行檢驗的判定規則 |
(Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Decision rules for proving conformance or non-conformance with specifications) |
| BS EN ISO 14257-2001 |
聲學.為評估其聲學性能對工作室空間聲音分布曲線的測量和參數描述 |
(Acoustics - Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance) |
| BS EN ISO 14268-2003 |
皮革.物理和機械試驗.水蒸氣滲透性的測定 |
(Leather - Physical and mechanical tests - Determination of water vapour permeability) |
| BS EN ISO 14270-2001 |
電阻點焊、滾焊和浮凸焊接機械剝離試驗的程序和樣品尺寸 |
(Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds) |
| BS EN ISO 14271-2001 |
電阻點焊、凸焊和滾焊的維氏硬度試驗(低荷載和超微硬度) |
(Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness)) |
| BS EN ISO 14272-2001 |
電阻點焊和浮凸焊接十字形抗拉試驗的程序和樣品尺寸 |
(Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds) |
| BS EN ISO 14273-2001 |
電阻點焊、縫焊和浮凸焊接剪切試驗的程序和樣品尺寸 |
(Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds) |
| BS EN ISO 14284-2002 |
鋼鐵.測定化學成分用的樣品的取樣和制備 |
(Steel and iron - Sampling and preparation of samples for the determination of chemical composition) |
| BS EN ISO 14310-2002 |
石油和天然氣工業.井下設備.裝填器和沙橋卡鉆 |
(Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs) |
| BS EN ISO 14314-2004 |
往復式內燃機.反沖起動設備.一般安全要求 |
|
| BS EN ISO 14314-2004 |
往復式內燃機.反沖起動設備.一般安全要求 |
|
| BS EN ISO 14324-2003 |
電阻點焊.焊接有損試驗.點焊接頭的疲勞試驗方法 |
(Resistance spot welding - Destructive tests of welds - Method for the fatigue testing of spot welded joints) |
| BS EN ISO 14327-2004 |
電阻焊接.電阻點焊、凸焊和縫焊用可焊性瓣輪的測定規程 |
|
| BS EN ISO 14329-2003 |
電阻點焊.焊接有損試驗.電阻點焊、縫焊和凸焊的故障類型和幾何測量 |
(Resistance welding - Destructive tests of welds - Failure types and geometric measurements for resistance spot, seam and projection welds) |
| BS EN ISO 14344-2005 |
焊接和有關處理.焊劑和氣體保護弧焊法.消耗品的采購導則 |
|
| BS EN ISO 14356-2003 |
牙科學.復制材料 |
(Dentistry - Duplicating material) |
| BS EN ISO 14372-2001 |
焊接耗材.通過可擴散氫測量法測定手工電弧焊焊條的抗?jié)裥?/td>
| (Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen) |
| BS EN ISO 14402-1999 |
水質.流量分析方法對苯酚指數的測定(FIA和CFA) |
(Water quality - Determination of phenol index by flow analysis (FIA and CFA)) |
| BS EN ISO 14403-2002 |
水質.通過連續流量分析測定總氰化物和游離氰化物含量 |
(Water quality - Determination of total cyanide and free cyanide by continuous flow analysis) |
| BS EN ISO 14419-1999 |
紡織材料.耐油性.耐碳?xì)浠衔镌囼?yàn) |
(Textiles - Oil repellency - Hydrocarbon resistance test) |
| BS EN ISO 14438-2002 |
建筑物用玻璃.能量平衡值的測定.計算法 |
(Glass in building - Determination of energy balance value - Calculation method) |
| BS EN ISO 14460-1999 |
賽車駕駛員的防護服裝.對熱和火焰的防護.性能要求和試驗方法 |
(Protective clothing for automobile racing drivers - Protection against heat and flame - Performance requirements and test methods) |
| BS EN ISO 14501-1999 |
奶和奶粉.黃曲霉毒素M1含量的測定.用免疫親和色譜法提煉和用高效液體色譜分析法測定 |
(Milk and milk powder - Determination of aflatoxin MDOWN1 content - Clean-up by immunoaffinity chromatography and determination by high-performance liquid chromatography) |
| BS EN ISO 14509-2001 |
小型船舶.動力娛樂船發出的氣載噪聲的測定 |
(Small craft - Measurement of airborne sound emitted by powered recreational craft) |
| BS EN ISO 14526-1-2000 |
塑料.酚醛粉末模塑化合物(PF-PMCs).名稱與符號系統和規范基礎 |
(Plastics - Phenolic powder moulding compounds (PF-PMCs) - Designation system and basis for specifications) |
| BS EN ISO 14526-2-2000 |
塑料.酚醛粉末模塑化合物(PF-PMCs).試樣的制備和特性的測定 |
(Plastics - Phenolic powder moulding compounds (PF-PMCs) - Preparation of test specimens and determination of properties) |
| BS EN ISO 14526-3-2000 |
塑料.酚醛粉末模塑化合物(PF-PMCs).對所選擇模塑化合物的要求 |
(Plastics - Phenolic powder moulding compounds (PF-PMCs) - Requirements for selected moulding compounds) |
| BS EN ISO 14527-1-2000 |
塑料.脲醛和脲/蜜胺酚醛粉末模塑化合物(UF-和UF/MF-PMCs).名稱與符號系統和規范基礎 |
(Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Designation system and basis for specifications) |
| BS EN ISO 14527-2-2000 |
試樣制備和特性測定 |
(Preparation of test specimens and determination of properties) |
| BS EN ISO 14527-3-2000 |
塑料.脲醛和脲/蜜胺酚醛粉末模塑化合物(UF-和UF/MF-PMCs).對所選擇模塑化合物的要求 |
(Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Requirements for selected moulding compounds) |
| BS EN ISO 14528-1-2000 |
塑料.蜜胺酚醛粉末模塑化合物(MF-PMCs).名稱與符號系統和規范基礎 |
(Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Designation system and basis for specifications) |
| BS EN ISO 14528-2-2000 |
塑料.蜜胺酚醛粉末模塑化合物(MF-PMCs).試樣制備和特性測定 |
(Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Preparation of test specimens and determination of properties) |
| BS EN ISO 14528-3-2000 |
塑料.蜜胺酚醛粉末模塑化合物(MF-PMCs).對所選擇的模塑化合物的要求 |
(Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Requirements for selected moulding compounds) |
| BS EN ISO 14529-1-2000 |
塑料.蜜胺酚醛粉末模塑化合物(MF-PMCs).名稱與符號系統和規范基礎 |
(Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Designation system and basis for specifications) |
| BS EN ISO 14529-2-2000 |
塑料.蜜胺/酚醛粉末模塑化合物(MP-PMCs).試樣制備和特性測定 |
(Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Preparation of test specimens and determination of properties) |
| BS EN ISO 14529-3-2000 |
塑料.蜜胺/酚醛粉末模塑化合物(MP-PMCs).對所選擇模塑化合物的要求 |
(Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Requirements for selected moulding compounds) |
| BS EN ISO 14530-1-2000 |
塑料.非飽和聚酯粉末模塑化合物(UP-PMCs).名稱與符號系統和規范基礎 |
(Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Designation system and basis for specifications) |
| BS EN ISO 14530-2-2000 |
塑料.非飽和聚酯粉末模塑化合物(UP-PMCs).試樣的制備和特性測定 |
(Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Preparation of test specimens and determination of properties) |
| BS EN ISO 14530-3-2000 |
塑料.非飽和聚酯粉末模塑化合物(UP-PMCs).對所選擇模塑化合物的要求 |
(Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Requirements for selected moulding compounds) |
| BS EN ISO 14534-2002 |
眼科光學.接觸鏡片和接觸透鏡護理制品.基礎要求 |
(Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements) |
| BS EN ISO 14539-2002 |
操作工業機器人.帶抓爪的物料搬運設備.詞匯和特征表示 |
(Manipulating industrial robots - Object handling with grasp-type grippers - Vocabulary and presentation of characteristics) |
| BS EN ISO 14554-1-2001 |
焊接的質量要求.金屬材料的耐焊性.全面質量要求 |
(Quality requirements for welding - Resistance welding of metallic materials - Comprehensive quality requirements) |
| BS EN ISO 14554-2-2001 |
焊接的質量要求.金屬材料的耐焊性.基本質量要求 |
(Quality requirements for welding - Resistance welding of metallic materials - Elementary quality requirements) |
| BS EN ISO 14555-1998 |
焊接.金屬材料的電弧螺栓焊接 |
(Welding - Arc stud welding of metallic materials) |
| BS EN ISO 14556-2000 |
鋼.卻貝V形切痕擺式?jīng)_擊試驗.儀器試驗法 |
(Steel - Charpy V-notch pendulum impact test - Instrumented test method) |
| BS EN ISO 14557-2003 |
消防水龍帶.橡膠和塑料抽吸軟管和軟管組件 |
(Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies) |
| BS EN ISO 14565-2001 |
動物飼料.維生素A含量的測定.使用高性能液相色譜法 |
(Animal feeding stuffs - Determination of vitamin A content - Method using high-performance liquid chromatography) |
| BS EN ISO 14577-1-2002 |
冶金材料.測量材料硬度和參數用的儀表壓痕試驗.試驗方法 |
(Metallic materials - Instrumented indentation test for hardness and materials parameters - Test method) |
| BS EN ISO 14577-2-2002 |
冶金材料.測量金屬硬度和參數用的儀表壓痕試驗.試驗機器的校驗和校準 |
(Metallic materials - Instrumented indentation test for hardness and materials parameters - Verification and calibration of testing machines) |
| BS EN ISO 14577-3-2002 |
冶金材料.測量金屬硬度和參數用的儀表壓痕試驗.校對用塊規的校準 |
(Metallic materials - Instrumented indentation test for hardness and materials parameters - Calibration of reference blocks) |
| BS EN ISO 14579-2001 |
圓柱頭內六角螺釘 |
(Hexalobular socket head cap screws) |
| BS EN ISO 14580-2001 |
凸圓頭內六角螺釘 |
(Hexalobular socket cheese head screws) |
| BS EN ISO 14583-2001 |
平頭內六角螺釘 |
(Hexalobular socket pan head screws) |
| BS EN ISO 14584-2001 |
半埋頭內六角螺釘 |
(Hexalobular socket raised countersunk head screws) |
| BS EN ISO 14585-2001 |
平頭內六角攻絲螺釘 |
(Hexalobular socket pan head tapping screws) |
| BS EN ISO 14586-2001 |
埋頭內六角攻絲螺釘 |
(Hexalobular socket countersunk head tapping screws) |
| BS EN ISO 14587-2001 |
半埋頭(橢圓形)內六角攻絲螺釘 |
(Hexalobular socket raised countersunk (oval) head tapping screws) |
| BS EN ISO 14588-2001 |
沉頭鉚釘.術語和定義 |
(Blind rivets - Terminology and definitions) |
| BS EN ISO 14589-2001 |
沉頭鉚釘,機械試驗 |
(Blind rivets - Mechanical testing) |
| BS EN ISO 14596-2002 |
石油及其產品的試驗方法.硫含量測定.波長色散X射線熒光光譜法 |
(Methods of test for petroleum and its products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry) |
| BS EN ISO 14597-1999 |
石油產品.釩和鎳含量的測定.波長分散X射線熒光分光光譜法 |
(Petroleum products - Determination of vanadium and nickel content - Wavelength-dispersive X-ray fluorescence spectrometry) |
| BS EN ISO 1460-1995 |
金屬鍍層.鐵類材料的熱浸鍍鋅涂層.用重量測定法測定單位面積重量 |
(Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com