標準號 |
中文名稱 |
英文名稱 |
| ISO 8455-1986 |
袋裝生咖啡豆.貯存和運輸指南 |
Green coffee in bags; Guide to storage and transport |
| ISO 8456-1985 |
松散物料的儲存設備.安全規范 |
Storage equipment for loose bulk materials; Safety code |
| ISO 8457-1-1989 |
鋼絲條.第1部分:尺寸和公差 |
Steel wire rod; part 1: dimensions and tolerances |
| ISO 8458-1-2002 |
機械彈簧用鋼絲.第1部分:一般要求 |
Steel wire for mechanical springs - Part 1: General requirements |
| ISO 8458-2-2002 |
機械彈簧用鋼絲.第2部分:鉛淬冷拔非合金鋼絲 |
Steel wire for mechanical springs - Part 2: Patented cold-drawn non-alloy steel wire |
| ISO 8458-3-2002 |
機械彈簧用鋼絲.第3部分:油淬火和回火鋼絲 |
Steel wire for mechanical springs - Part 3: Oil-hardened and tempered wire |
| ISO 8459-1-1988 |
文獻工作.目錄數據名錄.第1部分:內部流通應用 |
Documentation; bibliographic data element directory; part 1: interloan applications |
| ISO 8459-2-1992 |
情報和文獻.書目數據手冊.第2部分:采購應用 |
Information and documentation; bibliographic data element directory; part 2: acquisitions applications |
| ISO 8459-3-1994 |
信息和文獻.書目數據手冊.第3部分:信息檢索的應用 |
Information and documentation - Bibliographic data element directory - Part 3: Information retrieval applications |
| ISO 8459-4-1998 |
文獻工作.目錄數據指南.第1部分:循環使用 |
Information and documentation - Bibliographic data element directory - Part 4: Circulation applications |
| ISO 846-1997 |
塑料.微生物作用的評價 |
Plastics - Evaluation of the action of microorganisms |
| ISO 8460-1987 |
速溶咖啡.自由流動和壓實體密度的測定 |
Instant coffee; Determination of free-flow and compacted bulk densities |
| ISO 8462-1-1986 |
信息處理.以394次磁通變換/mm(10000)次磁通變換/in和39字符/mm錄制的(1000字符/in)錄制的字符集編碼記錄(GCR)的6.30mm(0.25in)盒式磁帶數據交換.第1部分:機械、物理和磁性特征 |
Information processing; Data interchange on 6,30 mm (0.25 in) magnetic tape cartridge using GCR recording at 394 ftpmm (10 000 ftpi), 39 cpmm (1 000 cpi); Part 1 : Mechanical, physical and magnetic properties |
| ISO 8462-2-1986 |
信息處理.以394次磁通變換/mm)10000次磁通變換/in)和39字符/mm)1000字符/in)錄制的字符集編碼記錄(GCR 的6.30mm(0.25in)盒式磁帶數據交換.第2部分:流動式 |
Information processing; Data interchange on 6,30 mm (0.25 in) magnetic tape cartridge using GCR recording at 394 ftpmm (10 000 ftpi), 39 cpmm (1 000 cpi); Part 2 : Streaming mode |
| ISO 8466-1-1990 |
水質.對水的性能特征分析方法和評價方法的校準與計算.第1部分:線性效驗功能的統計計算 |
Water quality; calibration and evaluation of analytical methods and estimation of performance characteristics; part 1: statistical evaluation of the linear calibration function |
| ISO 8466-2-2001 |
水質.對水的性能特性分析方法和評價方法的校準與計算.第2部分:非線性二級校準方程的校準方法 |
Water quality - Calibration and evaluation of analytical methods and estimation of performance characteristics - Part 2: Calibration strategy for non-linear second-order calibration functions |
| ISO 8467-1993 |
水質.高錳酸鹽指數的測定 |
Water quality; determination of permanganate index |
| ISO 8468-1990 |
船橋設計和有關設備.要求和導則 |
Ship`s bridge layout and associated equipment; requirements and guidelines |
| ISO 8469-1994 |
小型船舶.不耐火的燃料軟管 |
Small craft - Non-fire-resistant fuel hoses |
| ISO 8470 DAM 1-1991 |
道路車輛.帶平座和16mm六角體的M14×1.25火花塞及其缸頭蓋.第1次修改 |
Road vehicles; M14 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housing; amendment 1 |
| ISO 8470-2001 |
道路車輛.帶平座和16mm六角M14×1.25火花塞及其在汽缸蓋上的座孔 |
Road vehicles - M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings |
| ISO 8474-1986 |
包裝.滿裝的運輸包裝.浸水試驗 |
Packaging; Complete, filled transport packages; Water immersion test |
| ISO 8478-1996 |
攝影.攝影機透鏡.ISO 光譜透射率的測量 |
Photography - Camera lenses - Measurement of ISO spectral transmittance |
| ISO 8479-1986 |
航空航天.流體系統的Q形夾.尺寸 |
Aerospace; Q clamps (centre-mounted clamps) for fluid systems; Dimensions |
| ISO 848-1981 |
工業用磷酸.鈣含量的測定.滴定法 |
Phosphoric acid for industrial use; Determination of calcium content; Titrimetric method |
| ISO 8483-2003 |
玻璃增強熱固性塑料管及配件.栓結法蘭接頭設計驗證的試驗方法 |
(Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of bolted flange joints) |
| ISO 8483-2003 |
玻璃增強熱固性塑料管及配件.栓結法蘭接頭設計驗證的試驗方法 |
|
| ISO 8484-1987 |
儲蓄存折的磁條 |
Magnetic stripes on savingsbooks |
| ISO 8485-1989 |
程序設計語言.APL |
Programming languages; APL |
| ISO 8486-1-1996 |
粘合磨料.粒度分布的測定和名稱與符號.第1部分:粒度從F4至F220 |
Bonded abrasives - Determination and designation of grain size distribution - Part 1: Macrogrits F4 to F220 |
| ISO 8486-1-1996 |
粘合磨料.粒度分布的測定和名稱與符號.第1部分:粒度從F4至F220 |
Bonded abrasives - Determination and designation of grain size distribution - Part 1: Macrogrits F4 to F220 |
| ISO 8486-2-1996 |
粘合磨料.粒度分布的測定、名稱與符號.第2部分:粒度從F230至F1200 |
Bonded abrasives - Determination and designation of grain size distribution - Part 2: Microgrits F230 to F1200 |
| ISO 8488-1986 |
自行車.用于裝配在自行車叉上頭部配件的螺紋 |
Cycles; Screw threads used to assemble head fittings on bicycle forks |
| ISO 8489-1-1995 |
紡織機械和附件.交叉卷繞絡紗筒子.第1部分:推薦的主要尺寸 |
Textile machinery and accessories - Cones for cross winding - Part 1: Recommended main dimensions |
| ISO 8489-2-1995 |
紡織機械和附件.交叉卷繞絡紗筒子.第2部分:有半角(3角度) 30弧分的卷繞絡紗筒子 |
Textile machinery and accessories - Cones for cross winding - Part 2: Dimensions, tolerances and designation of cones with half angle 3 30 |
| ISO 8489-3-1995 |
紡織機械和附件.交叉卷繞絡紗筒子.第3部分:有半角(4角度, 20弧分)的卷繞絡紗筒子 |
Textile machinery and accessories - Cones for cross winding - Part 3: Dimensions, tolerances and designation of cones with half angle 4 20 |
| ISO 8489-4-1995 |
紡織機械和附件.交叉卷繞絡紗筒子.第4部分:染色卷繞絡紗用有半角(4角度, 20弧分)的卷繞絡紗筒子的尺寸,公差和命名 |
Textile machinery and accessories - Cones for cross winding - Part 4: Dimensions, tolerances and designation of cones with half angle 4 20 for winding for dyeing purposes |
| ISO 8489-5-1995 |
紡織機械和附件.交叉卷繞絡紗筒子.第5部分:有半角(5角度、 57弧分)的卷繞絡紗筒子的尺寸、公差和命名 |
Textile machinery and accessories - Cones for cross winding - Part 5: Dimensions, tolerances and designation of cones with half angle 5 57 |
| ISO 8490-1986 |
金屬材料.板材和帶材.改進的克里森杯突試驗 |
Metallic materials; Sheet and strip; Modified Erichsen cupping test |
| ISO 8491-1998 |
金屬材料.管材(全截面).彎曲試驗 |
Metallic materials - Tube (in full section) - Bend test |
| ISO 8492-1998 |
金屬材料.管材.壓扁試驗 |
Metallic materials - Tube - Flattening test |
| ISO 8493-1998 |
金屬材料.管材.擴張試驗 |
Metallic materials - Tube - Drift-expanding test |
| ISO 8494-1998 |
金屬材料.管材.卷邊試驗 |
Metallic materials - Tube - Flanging test |
| ISO 8495-1998 |
金屬材料.管材.環形擴管試驗 |
Metallic materials - Tube - Ring-expanding test |
| ISO 8496-1998 |
金屬材料.管材.環形拉伸試驗 |
Metallic materials - Tube - Ring tensile test |
| ISO 8497-1994 |
絕熱.圓形管道用絕熱穩定狀態中熱傳輸性能測定 |
Thermal insulation; determination of steady-state thermal transmission properties of thermal insulation for circular pipes |
| ISO 8498-1990 |
機織織物.織疵的描述.詞匯 |
Woven fabrics; description of defects; vocabulary |
| ISO 8499-1990 |
針織物.疵點的描述.詞匯 |
Knitted fabrics; description of defects; vocabulary |
| ISO 8499-2003 |
針織物.疵點的描述.詞匯 |
(Knitted fabrics - Description of defects - Vocabulary ) |
| ISO 8499-2003 |
針織物.疵點的描述.詞匯 |
|
| ISO 850-1976 |
工業用三聚磷酸鈉.不溶于水物質的測定 |
Sodium tripolyphosphate for industrial use; Determination of matter insoluble in water |
| ISO 8501-1 Supplement-1994 |
涂料和有關產品使用前鋼襯底的制備.表面清潔度的視覺評價.第1部分的補充信息:用不同磨料噴砂處理時鋼表面變化的典型攝影實例 |
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Informative supplement to Part 1: Representative photographic examples of the change of appearance imparted to steel when blast- |
| ISO 8501-2-1994 |
涂料和有關產品使用前鋼襯底的制備.表面清潔度的視覺評價.第2部分:已有覆層局部除去后已涂覆鋼襯體的制備等級 |
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings |
| ISO 8501-3-2001 |
涂料和有關產品使用之前鋼襯底的預處理.表面清潔度的目視評定.第3部分:焊縫、切邊及其它有表面缺欠的部位預處理等級 |
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, cut edges and other areas with surface imperfections |
| ISO 8502-10-1999 |
使用涂料和相關產品之前鋼基質的制備.表面清潔度評定試驗.第10部分:滴定測定水溶氯化物的現場試驗方法 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 10: Field method for the titrimetric determination of water-soluble chloride |
| ISO 8502-12-2003 |
使用涂料和相關產品之前鋼基質的制備.表面清潔度評定試驗.第12部分:滴定測定水溶鐵離子的現場試驗方法 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrrous ions |
| ISO 8502-12-2003 |
使用涂料和相關產品之前鋼基質的制備.表面清潔度評定試驗.第12部分:滴定測定水溶鐵離子的現場試驗方法 |
|
| ISO 8502-12-2003 |
使用涂料和相關產品之前鋼基質的制備.表面清潔度評定試驗.第12部分:滴定測定水溶鐵離子的現場試驗方法 |
|
| ISO 8502-12-2003 |
使用涂料和相關產品之前鋼基質的制備.表面清潔度評定試驗.第12部分:滴定測定水溶鐵離子的現場試驗方法 |
|
| ISO 8502-2-1992 |
涂料和有關產品使用前鋼襯底的制備.表面清潔度的評定試驗.第2部分:清潔表面氯化物的實驗室測定 |
Preparation of steel substrates before application of paints and related products; tests for the assessment of surface cleanliness; part 2: laboratory determination of chloride on cleaned surfaces |
| ISO 8502-3-1992 |
涂料和有關產品使用前鋼襯底的制備.表面清潔度的評定試驗.第3部分:涂漆鋼表面粉塵評定 |
Preparation of steel substrates before application of paint and related products; tests for the assessment of surface cleanliness; part 3: assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) |
| ISO 8502-4-1993 |
涂料和有關產品使用前鋼襯底的制備.表面清潔度的評定試驗.第4部分:涂料使用前的凝結可能性評定導則 |
Preparation of steel substrates before application of paint and related products; tests for the assessment of surface cleanliness; part 4: Guidance on the estimation of the probability of condensation prior to paint application |
| ISO 8502-5-1998 |
涂料和有關產品使用前鋼襯底的制備.表面清潔度評定試驗.第5部分:涂覆前已處理鋼表面上氯化物的測量(離子檢測管法) |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) |
| ISO 8502-6-1995 |
涂料和有關產品使用前的鋼襯底的制備.表面清潔度的評定試驗.第6部分:Bresle法分析用可溶性雜質的析取 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method |
| ISO 8502-8-2001 |
涂料和有關產品使用前的鋼襯底的制備.表面清潔度的評定試驗.第8部分:濕度折射測定的現場法 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 8: Field method for the refractometric determination of moisture |
| ISO 8502-9-1998 |
涂料和有關產品使用前鋼襯底的制備.表面清潔度評定試驗.第9部分:水溶性鹽電導測定的現場方法 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts |
| ISO 8503-1-1988 |
涂料和有關產品使用前的鋼襯底的制備.噴丸處理鋼基體的表面粗糙度.第1部分:噴砂處理表面的 ISO評定比較樣板的規范和定義 |
Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 1: specifications and definitions for ISO surface profile comparators for the assessment of abrasi |
| ISO 8503-2-1988 |
涂料和有關產品使用前的鋼襯底的制備.噴丸處理鋼基體的表面粗糙度.第2部分:噴砂處理表面的定級方法.比較方法 |
Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 2: method for the grading of surface profile of abrasive blast-cleaned steel; comparator procedure |
| ISO 8503-3-1988 |
涂料和有關產品使用前的鋼襯底的制備.噴丸處理鋼基體的表面粗糙度.第3部分:ISO表面輪廓比較儀的校準方法和表面輪廓的測定方法.顯微鏡的調焦方法 |
Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 3: method for the calibration of ISO surface profile comparators and for the determination of surf |
| ISO 8503-4-1988 |
涂料和有關產品使用前的鋼襯底的制備.噴丸處理鋼基體的表面粗糙度.第4部分:ISO表面輪廓比較儀的校準方法和表面輪廓的測定方法.觸針儀器的方法 |
Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 4: method for the calibration of ISO surface profile comparators and for the determination of surf |
| ISO 8503-5-2003 |
涂裝油漆和有關產品前鋼材預處理.噴射清理鋼材的表面粗糙度特性.第5部分:表面輪廓測定的復制帶法 |
(Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile) |
| ISO 8503-5-2003 |
涂裝油漆和有關產品前鋼材預處理.噴射清理鋼材的表面粗糙度特性.第5部分:表面輪廓測定的復制帶法 |
|
| ISO 8503-5-2003 |
涂裝油漆和有關產品前鋼材預處理.噴射清理鋼材的表面粗糙度特性.第5部分:表面輪廓測定的復制帶法 |
|
| ISO 8504-1-2000 |
涂料和有關產品使用前鋼襯底的制備.表面制備方法.第1部分:通用原理 |
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles |
| ISO 8504-2-2000 |
涂料和有關產品使用前鋼襯底的制備.表面制備方法.第2部分:噴砂清理 |
Preparation of steel substrates before application of paints and related product - Surface preparation methods - Part 2: Abrasive blast-cleaning |
| ISO 8504-3-1993 |
涂料和有關產品使用前鋼襯底的制備.表面制備方法.第3部分:手工工具和電動工具清洗 |
Preparation of steel substrates before application of paints and related products; surface preparation methods; part 3: hand- and power-tool cleaning |
| ISO 8507-1997 |
集成軟木盤.試驗方法 |
Agglomerated cork discs - Test methods |
| ISO 8509-1987 |
信息處理系統.開放系統互連.服務協議 |
Information processing systems; Open Systems Interconnection; Service conventions |
| ISO 851-1976 |
工業用三聚磷酸鈉.pH值的測定.電位滴定法 |
Sodium trypolyphosphate for industrial use; Measurement of pH; Potentiometric method |
| ISO 8510-1-1990 |
粘合劑.軟硬粘結試樣組件剝離試驗.第1部分:90度剝離 |
Adhesives; peel test for a flexible-bonded-to-rigid test specimen assembly; part 1: 90?peel |
| ISO 8510-2-1990 |
粘合劑.軟硬粘結試樣組件的剝離試驗.第2部分:180度剝離 |
Adhesives; peel test for a flexible-bonded-to-rigid test specimen assembly; part 2: 180?peel |
| ISO 8511-1995 |
橡膠配方配合劑.炭黑.粒度分布的測定 |
Rubber compounding ingredients - Carbon black - Determination of pellet size distribution |
| ISO 8512-1-1990 |
劃線平板.第1部分:鑄鐵 |
Surface plates; part 1: cast iron |
| ISO 8512-2-1990 |
劃線平板.第2部分:花崗巖 |
Surface plates; part 2: granite |
| ISO 8513-2000 |
塑料管道系統.玻璃纖維增強熱固性塑料管(GRP).縱向拉伸性能的測定 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of longitudinal tensile properties |
| ISO 8514-1-2000 |
縮微攝影技術.字母數字計算機輸出縮微品.質量控制.第1部分:試驗片和試驗數據的特征 |
Micrographics - Alphanumeric computer output microforms - Quality control - Part 1: Characteristics of the test slide and test data |
| ISO 8514-2-2000 |
縮微攝影技術.字母數字計算機輸出縮微品.質量控制.第2部分:方法 |
Micrographics - Alphanumeric computer output microforms - Quality control - Part 2: Method |
| ISO 8516-1987 |
紡織玻璃纖維.變形紗線.規范的基礎 |
Textile glass; Textured yarns; Basis for a specification |
| ISO 8518-2001 |
工作場所空氣.微粒鉛和鉛化合物含量測定.火焰或電熱原子吸收光譜測定法 |
Workplace air - Determination of particulate lead and lead compounds - Flame or electrothermal atomic absorption spectrometric method |
| ISO 8521-1998 |
塑料管道系統.玻璃增強熱固塑料(GRP)管:表面內周拉伸強度的測定 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength |
| ISO 8523-1991 |
微生物學.預濃縮腸桿菌族檢測的一般指南 |
Microbiology; general guidance for the detection of Enterobacteriaceae with pre-enrichment |
| ISO 8524-1986 |
播撒顆粒狀殺蟲劑或除草劑的設備.試驗方法 |
Equipment for distributing granulated pesticides or herbicides; Test method |
| ISO 8526-1-1990 |
組合機床部件.工件夾板.標稱尺寸800mm及以下的工件夾板 |
Modular units for machine tools; workholding pallets; part 1: workholding pallets up to 800 mm nominal size |
| ISO 8526-2 Technical Corrigendum 1-1992 |
組合機床部件.工件夾板.第2部分:公稱尺寸大于800mm工件夾板.技術勘誤1 |
Modular units for machine tools; workholding pallets; part 2: workholding pallets of nominal size greater than 800 mm; technical corrigendum 1 |
| ISO 8526-2-1990 |
組合機床部件.工件夾板.第2部分:標稱尺寸800mm以上的工件夾板 |
Modular units for machine tools; workholding pallets; part 2: workholding pallets of nominal size greater than 800 mm |
| ISO 8528-1-1993 |
往復式內燃機驅動的交流發電機組.第1部分:使用、額定功率和性能 |
Reciprocating internal combustion engine driven alternating current generating sets; part 1: application, ratings and performance |
| ISO 8528-10-1998 |
往復式內燃機驅動的交流發電機組.第10部分:包絡面法測量空氣噪聲 |
Reciprocating internal combustion engine driven alternating current generating sets - Part 10: Measurement of airborne noise by the enveloping surface method |
| ISO 8528-12-1997 |
往復式內燃機驅動的交流發電機組.第12部分:應急發電設備 |
Reciprocating internal combustion engine driven alternating current generating sets - Part 12: Emergency power supply to safety services |
| ISO 8528-2-1993 |
往復式內燃機驅動的交流發電機組.第2部分:發動機 |
Reciprocating internal combustion engine driven alternating current generating sets; part 2: engines |
| ISO 8528-3-1993 |
往復式內燃機驅動的交流發電機組.第3部分:機組交流發電機 |
Reciprocating internal combustion engine driven alternating current generating sets; part 3: alternating current generators for generating sets |
| ISO 8528-4-1993 |
往復式內燃機驅動的交流發電機組.第4部分:控制裝置機開關裝置 |
Reciprocating internal combustion engine driven alternating current generating sets; part 4: controlgear and switchgear |
| ISO 8528-5-1993 |
往復式內燃機驅動的交流發電機組.第5部分:發電機組 |
Reciprocating internal combustion engine driven alternating current generating sets; part 5: generating sets |
| ISO 8528-6-1993 |
往復式內燃機驅動的交流發電機組.第6部分:試驗方法 |
Reciprocating internal combustion engine driven alternating current generating sets; part 6: test methods |
| ISO 8528-7-1994 |
往復式內燃機驅動的交流發電機組.第7部分:規范和設計的技術申報 |
Reciprocating internal combustion engine driven alternating current generating sets - Part 7: Technical declarations for specification and design |
| ISO 8528-8-1995 |
往復式內燃機驅動的交流發電機組.第8部分:低功率發電機組要求和試驗 |
Reciprocating internal combustion engine driven alternating current generating sets - Part 8: Requirements and tests for low-power generating sets |
| ISO 8528-9-1995 |
往復式內燃機驅動的交流發電機組.第9部分:機械振動的測量和評定 |
Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibration |
| ISO 8529-1-2001 |
基準中子輻射.第1部分:特性和生產方法 |
Reference neutron radiations - Part 1: Characteristics and methods of production |
| ISO 8529-1-2001 |
基準中子輻射.第1部分:特性和生產方法 |
Reference neutron radiations - Part 1: Characteristics and methods of production |
| ISO 8529-2-2000 |
參考中子輻射.第2部分:與以輻射場為表征的基本量有關的輻射保護裝置的校準規則 |
Reference neutron radiations - Part 2: Calibration fundamentals of radiation protection devices related to the basic quantities characterizing the radiation field |
| ISO 8529-3-1998 |
參考中子輻射.第3部分:區域及個人劑量計的校正和對中子能作用及入射角的反應測定 |
Reference neutron radiations - Part 3: Calibration of area and personal dosimeters and determination of their response as a function of neutron energy and angle of incidence |
| ISO 853-1976 |
工業用三聚磷酸鈉和焦磷酸鈉.燒失量的測定 |
Sodium tripolyphosphate and sodium pyrophosphate for industrial use; Determination of loss on ignition |
| ISO 8530-1986 |
錳礦石和鉻礦石.檢驗試樣組成部分精度的實驗方法 |
Manganese and chromium ores; Experimental methods for checking the precision of sample division |
| ISO 8531-1986 |
錳礦石和鉻礦石.檢驗水分測定精度的實驗方法 |
Manganese and chromium ores; Experimental methods for checking the precision of moisture determination |
| ISO 8532-1995 |
證券.證券號碼傳輸格式 |
Securities - Format for transmission of certificate numbers |
| ISO 8533-2003 |
玻璃增強熱固性塑料管及配件.膠合接頭或包好的接頭設計驗證的試驗方法 |
(Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of cemented or wrapped joints) |
| ISO 8533-2003 |
玻璃增強熱固性塑料管及配件.膠合接頭或包好的接頭設計驗證的試驗方法 |
|
| ISO 8534-1996 |
動植物脂肪和油.水含量的測定.卡.弗歇爾(Karl Fischer)法 |
Animal and vegetable fats and oils - Determination of water content - Karl Fischer method |
| ISO 8535-1-1996 |
壓燃式發動機.高壓噴射燃油管用的鋼管.第1部分:無縫冷拔單壁管的要求 |
Compression-ignition engines - Steel tubes for high-pressure fuel injection pipes - Part 1: Requirements for seamless cold-drawn single-wall tubes |
| ISO 8535-2-2003 |
壓燃式發動機.高壓燃油噴管用鋼管.第2部分:組合管的要求 |
(Compression-ignition engines - Steel tubes for high-pressure fuel injection pipes - Part 2: Requirements for composite tubes) |
| ISO 8535-2-2003 |
壓燃式發動機.高壓燃油噴管用鋼管.第2部分:組合管的要求 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com