標準號 |
中文名稱 |
英文名稱 |
| BS ISO 14648-2-2002 |
顯微攝影.使用單獨的內部顯示系統的產生圖像的COM記錄裝置的質量控制.使用方法 |
Micrographics - Quality control of COM recorders that generate images using a single internal display system - Method of use |
| BS ISO 14654-2000 |
混凝土增強用環氧樹脂涂覆鋼 |
(Epoxy-coated steel for the reinforcement of concrete) |
| BS ISO 14656-2000 |
混凝土加筋用鋼的涂層的環氧樹脂粉末和密封材料 |
Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete |
| BS ISO 14661-2000 |
工業用熱渦輪機(蒸氣渦輪機、氣體膨脹式輪機).一般要求 |
Thermal turbines for industrial applications (steam turbines, gas expansion turbines) - General requirements |
| BS ISO 14663-1-2002 |
塑料.乙烯/乙烯醇共聚物模塑和壓塑材料.命名系統和基本規范 |
Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Designation system and basis for specifications |
| BS ISO 14663-2-2002 |
塑料.乙烯/乙烯醇共聚物模塑和壓塑材料.式樣制備和性能測定 |
Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Preparation of test specimens and determination of properties |
| BS ISO 14674-2005 |
奶和奶粉.黃曲霉毒素M1含量的測定.免疫親和色譜法清潔和薄層色譜法測定 |
|
| BS ISO 14681-1998 |
柴油發動機.燃料噴射泵試驗.燃料噴嘴的校正 |
Diesel engines - Fuel injection pump testing - Calibrating fuel injectors |
| BS ISO 14686-2003 |
液體比重的測定.水井的泵送試驗.設計、性能和使用的考慮和指南 |
(Hydrometric determinations - Pumping tests for water wells - Considerations and guidelines for design, performance and use) |
| BS ISO 14695-2003 |
通用風機.風機振動的測量方法 |
(Fans for general purposes - Method of measurement of fan vibration) |
| BS ISO 14706-2001 |
表面化學分析.全反射X射線熒光(TXRF)光譜法測定硅片的表面原子污染 |
Surface chemical analysis - Determination of surface elemental contamination on silicon wafers by total-reflection X-ray flourescence (TXRF) spectroscopy |
| BS ISO 14707-2000 |
表面化學分析.輝光放電發射光譜.使用介紹 |
Surface chemical analysis - Glow discharge optical emission spectrometry (GD-OES) - Introduction to use |
| BS ISO 14711-2003 |
航天系統.不載人運行的概念產品.定義和評定概念產品指南 |
(Space systems - Unmanned mission operations concepts - Guidelines for defining and assessing concept products) |
| BS ISO 14714-2001 |
香精油和芳族萃取物.殘留苯含量測定 |
Essential oils and aromatic extracts - Determination of residual benzene content |
| BS ISO 14721-2003 |
航天數據和信息傳輸系統.開放式檔案信息系統.參考模式 |
(Space data and information transfer systems - Open archival information systems - Reference model) |
| BS ISO 14726-1-2000 |
船只和船上技術.管道系統容量的識別顏色.主要顏色和媒介 |
Ships and marine technology. Identification colours for the content of piping systems. Main colours and media |
| BS ISO 14728-1-2004 |
滾動軸承.線性運動滾動軸承.動態荷載額定值和額定壽命 |
|
| BS ISO 14728-2-2004 |
滾動軸承.線性運動滾動軸承.靜態荷載額定值 |
|
| BS ISO 14740-1998 |
林業機械.灌木切削機、草地修剪機、桿材切削機及類似設備用背負式電源驅動裝置.安全要求和試驗 |
Forestry machinery - Backpack power units for brush cutters, grass trimmers, pole cutters and similar appliances - Safety requirements and testing |
| BS ISO 14743-2004 |
氣壓傳動.熱塑性管道用插入式連接件 |
|
| BS ISO 14792-2003 |
道路車輛.重型商用車輛和公共汽車.穩態循環試驗 |
(Road vehicles - Heavy commercial vehicles and buses - Steady-state circular tests) |
| BS ISO 14793-2003 |
道路車輛.重型商用車輛和汽車.橫向瞬態響應試驗方法 |
(Road vehicles - Heavy commercial vehicles and buses - Lateral transient response test methods) |
| BS ISO 14794-2003 |
大型商用車輛和客車.轉彎制動.開環試驗方法 |
(Heavy commercial vehicles and buses - Braking in a turn - Open-loop test methods) |
| BS ISO 14807-2001 |
攝影.透射和反射光密度計.性能測定法 |
Photography - Transmission and reflection densitometers - Method for determining performance |
| BS ISO 14808-1998 |
攝影.135膠片盒的組成 |
(Photography - Composition of 135-film canisters) |
| BS ISO 14835-1-2005 |
機械振動和沖擊.末梢血管功能評定用冷刺激試驗.手指皮膚溫度的測量和評價 |
|
| BS ISO 14837-1-2005 |
機械振動.由鐵路系統產生的地面噪音和振蕩.一般指南 |
|
| BS ISO 14839-1-2002 |
機械振動.有主動磁性軸承的旋轉機械裝置.詞匯 |
(Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings - Vocabulary) |
| BS ISO 14839-2-2004 |
機械振動.裝有主動磁性軸承的旋轉機械的振動.振動評價 |
|
| BS ISO 14839-2-2004 |
機械振動.裝有主動磁性軸承的旋轉機械的振動.振動評價 |
|
| BS ISO 14848-1998 |
塑料.不飽和聚酯樹脂.130℃時反應性測定 |
Plastics - Unsaturated-polyester resins - Determination of reactivity at 130 鳦 |
| BS ISO 14849-1999 |
塑料.苯酚甲醛注模.自由氨和胺化合物的測定.靛酚法 |
Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Indophenol method |
| BS ISO 14850-1-2004 |
核能.廢棄物包裝件的活性測量.帶公開幾何條件的整體模型中的高分辨率γ光譜測定法 |
|
| BS ISO 14851-1999 |
水生介質中塑料材料極端好氣菌生物降解性的測定.在一封閉呼吸器中測定氧需求的方法 |
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer |
| BS ISO 14852-1999 |
水生介質中塑料材料極端好氣菌生物降解性的測定.提高二氧化碳的分析法 |
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide |
| BS ISO 14853-2005 |
塑料.含水系統中塑料材料的最大厭氧生物降解能力的測定.生物氣產生的測量方法 |
|
| BS ISO 14855-1999 |
在控制復合條件下塑料材料極端好氣菌生物降解性和非集合性的測定.提高二氧化碳分析的方法 |
Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide |
| BS ISO 14856-2001 |
計時計.手表殼.無表帶環式手表的固定尺寸 |
Timekeeping instruments - Wristwatch cases - Fixing dimensions of non-spring-bar types |
| BS ISO 14865-1998 |
林業機械.背負內燃機驅動的便攜式手持灌木鏟除機和草地修剪機.安全要求和試驗 |
Machinery for forestry - Portable hand-held brush cutters and grass trimmers with backpack mounted combustion engine power source - Safety requirements and testing |
| BS ISO 14869-2-2002 |
土壤分析.測定總素含量的溶解度.堿性溶解物的溶解 |
Soil quality - Dissolution for the determination of total element content - Dissolution by alkaline fusion |
| BS ISO 14879-1-2000 |
外科植入物.完全的膝關節修復物.脛骨支架耐用特性的測定 |
Implants for surgery - Total knee-joint prostheses - Determination of endurance properties of knee tibial trays |
| BS ISO 14880-1-2001 |
顯微透鏡配置.詞匯 |
Microlens array - Vocabulary |
| BS ISO 14881-2001 |
集成光學.接口.與耦合特性有關的參數 |
Integrated optics - Interfaces - Parameters relevant to coupling properties |
| BS ISO 14887-2001 |
樣品制備.液體中粉末的分散程序 |
Sample preparation - Dispersing procedures for powders in liquids |
| BS ISO 14892-2005 |
脫脂奶粉.高效液相色譜法測定維生素D的含量 |
|
| BS ISO 14892-2005 |
脫脂奶粉.高效液相色譜法測定維生素D的含量 |
|
| BS ISO 14897-2002 |
塑料.生產聚氨酯用多醇.水含量測定 |
Plastics - Polyols for use in the production of polyurethane - Determination of water content |
| BS ISO 14898-1999 |
塑料.聚氨酯生材料.芳香異氰酸酯.酸度測定 |
Plastics - Polyurethane raw materials - Aromatic isocyanates - Determination of acidity |
| BS ISO 14899-2001 |
塑料.聚氨酯生產用多醇.堿度測定 |
Plastics - Polyols for use in the production of polyurethane - Determination of basicity |
| BS ISO 14900-2001 |
塑料.聚氨酯生產用多醇.羥基值測定 |
Plastics - Polyols for use in the production of polyurethane - Determination of hydroxyl number |
| BS ISO 14910-1-1998 |
塑料.熱塑聚酯/聚醚和聚酯/聚醚鑄模和擠壓彈性體.命名體系和規范基礎 |
Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Designation system and basis for specifications |
| BS ISO 14910-2-1998 |
塑料.熱塑聚酯/聚醚和聚酯/聚醚鑄模和擠壓彈性體.試樣制備和性能測定 |
Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Preparation of test specimens and determination of properties |
| BS ISO 14912-2003 |
氣體分析.氣體混合成份數據的轉換 |
(Gas analysis - Conversion of gas mixture composition data) |
| BS ISO 14943-2004 |
核燃料技術.核臨界安全的相關管理標準 |
|
| BS ISO 14949-2001 |
外科植入物.兩節附加加工的硅彈性體 |
Implants for surgery - Two-part addition-cure silicone elastomers |
| BS ISO 14950-2004 |
航天系統.不載人航天器的可操作性 |
|
| BS ISO 14951-1-1999 |
航天系統.流體特性.氧 |
Space systems - Fluid characteristics - Oxygen |
| BS ISO 14951-10-1999 |
航天系統.流體特性.水 |
Space systems - Fluid characteristics - Water |
| BS ISO 14951-11-1999 |
航天系統.流體特性.氨 |
Space systems - Fluid characteristics - Ammonia |
| BS ISO 14951-12-1999 |
航天系統.流體特性.二氧化碳 |
Space systems - Fluid characteristics - Carbon dioxide |
| BS ISO 14951-13-1999 |
航天系統.流體特性.呼吸用空氣 |
Space systems - Fluid characteristics - Breathing air |
| BS ISO 14951-2-1999 |
航天系統.流體特性.氫推進劑 |
Space systems - Fluid characteristics - Hydrogen propellant |
| BS ISO 14951-3-1999 |
航天系統.流體特性.氮 |
Space systems - Fluid characteristics - Nitrogen |
| BS ISO 14951-4-1999 |
航天系統.流體特性.氦 |
Space systems - Fluid characteristics - Helium |
| BS ISO 14951-5-1999 |
航天系統.流體特性.四氧化氮推進劑 |
Space systems - Fluid characteristics - Nitrogen tetroxide propellant |
| BS ISO 14951-6-1999 |
航天系統.流體特性.一甲基聯氨推進劑 |
Space systems - Fluid characteristics - Monomethylhydrazine propellant |
| BS ISO 14951-7-1999 |
航天系統.流體特性.聯氨推進劑 |
Space systems - Fluid characteristics - Hydrazine propellant |
| BS ISO 14951-8-1999 |
航天系統.流體特性.煤油推進劑 |
Space systems - Fluid characteristics - Kerosene propellant |
| BS ISO 14951-9-1999 |
航天系統.流體特性.氬 |
Space systems - Fluid characteristics - Argon |
| BS ISO 14952-1-2004 |
航天系統.液體系統的表面清潔度.詞匯 |
|
| BS ISO 14952-2-2004 |
航天系統.液體系統的表面清潔度.清潔度等級 |
|
| BS ISO 14952-3-2004 |
航天系統.液體系統的表面清潔度.不揮發性殘流物和顆粒污染物的測定用分析程序 |
|
| BS ISO 14952-4-2004 |
航天系統.液體系統的表面清潔度.粗略清潔過程 |
|
| BS ISO 14952-4-2004 |
航天系統.液體系統的表面清潔度.粗略清潔過程 |
|
| BS ISO 14952-5-2004 |
航天系統.液體系統的表面清潔度.干燥過程 |
|
| BS ISO 14952-6-2004 |
航天系統.液體系統的表面清潔度.精確清潔過程 |
|
| BS ISO 14953-2000 |
航天系統.結構設計.發射的飛行器靜態合格性試驗用負載水平的測定 |
Space systems - Structural design - Determination of loading levels for static qualification testing of launch vehicles |
| BS ISO 1496-2-1997 |
第1系列貨運集裝箱.規范和試驗.保溫集裝箱 |
(Series 1 freight containers - Specification and testing - Thermal containers) |
| BS ISO 1496-3-1995 |
貨運集裝箱系列1.規范和試驗.第3部分:液體、氣體和加壓散料用罐式集裝箱 |
Series 1 freight containers - Specification and testing - Tank containers for liquids, gases and pressurized dry bulk |
| BS ISO 1496-4-1995 |
貨運集裝箱系列1.規范和試驗.不加壓的散料集裝箱 |
Series 1 freight containers - Specification and testing - Non-pressurized containers for dry bulk |
| BS ISO 14961-2002 |
空間數據和信息傳輸系統.參數值語言規范 |
Space data and information transfer systems - Parameter value language specification |
| BS ISO 14964-2001 |
機械振動.固定結構的振動.振動的測量和評價中質量管理的特殊要求 |
Mechanical vibration and shock - Vibration of stationary structures - Specific requirements for quality management in measurement and evaluation of vibration |
| BS ISO 14965-2000 |
環境空氣.全部無甲烷有機化合物的測定.低溫預濃縮和直接火焰電離探測法 |
Ambient air - Determination of total non-methane organic compounds - Cryogenic preconcentration and direct flame ionization detection method |
| BS ISO 14966-2002 |
環境空氣.無機纖維顆粒的數值濃度的測定.掃描電子顯微鏡檢查法 |
Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method |
| BS ISO 14968-2000 |
紙和紙板.切割尺寸辦公室用紙.一包紙卷曲的測量 |
Paper and board - Cut-size office paper - Measurement of curl in a pack of sheets |
| BS ISO 14972-1999 |
帶over-needle外部管內導管的一次性滅菌塞 |
Sterile obturators for single use with over-needle peripheral intravascular catheters |
| BS ISO 14975-2001 |
表面化學分析.信息格式 |
Surface chemical analysis - Information formats |
| BS ISO 14976-1998 |
表面化學分析.數據傳送格式 |
Surface chemical analysis - Data transfer format |
| BS ISO 14985-1999 |
工程圖紙的硬拷貝輸出.控制文件的結構規范 |
Hard-copy output of engineering drawings - Specification for the structure of control files |
| BS ISO 14997-2003 |
光學和光學儀器.測定光學件表面缺陷的試驗方法 |
(Optics and optical instruments - Test methods for surface imperfections of optical elements) |
| BS ISO 15-1998 |
滾動軸承.徑向軸承.邊界尺寸,一般計劃 |
Rolling bearings - Radial bearings - Boundary dimensions, general plan |
| BS ISO 15001-2003 |
麻醉和呼吸設備.與氧氣的兼容性 |
(Anaesthetic and respiratory equipment - Compatibility with oxygen) |
| BS ISO 15009-2002 |
土壤質量.揮發性香料烴類物質、萘和鹵化烴含量的氣相色譜分析測定.有熱解吸作用的洗滌和打擊法 |
Soil quality - Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons - Purge-and-trap method with thermal desorption |
| BS ISO 15010-1998 |
輸液和輸注瓶用一次性懸吊裝置.要求和試驗方法 |
Disposable hanging devices for transfusion and infusion bottles - Requirements and test methods |
| BS ISO 15016-2002 |
船舶和海上技術.用速度試驗數據分析法對速度和動力性能的評定導則 |
Ships and marine technology - Guidelines for the assessment of speed and power performance by analysis of speed trial data |
| BS ISO 15022-1-1999 |
證券.文電圖解(數據區字典).數據區和文電設計規則和導則 |
Securities - Scheme for messages (data field dictionary) - Data field and message design rules and guidelines |
| BS ISO 15022-2-1999 |
證券.文電圖解(數據區字典).數據區字典和文電目錄的維護. |
Securities - Scheme for messages (data field dictionary) - Maintenance of the data field dictionary and catalogue of messages |
| BS ISO 15023-1-2002 |
塑料.聚乙烯醇材料.名稱與符號系統和基本規范 |
Plastics - Poly(vinyl alcohol) (PVAL) materials - Designation system and basis for specifications |
| BS ISO 15023-2-2003 |
塑料.聚乙烯醇(PVAL)材料.特性的測定 |
(Plastics - Poly(vinyl alcohol) (PVAL) materials - Determination of properties) |
| BS ISO 15024-2002 |
纖維增強塑料復合材料.無方向性增強材料的模式I層間斷裂韌性(UPGIC)的測定 |
Fibre-reinforced plastic composites - Determination of mode I interlaminar fracture toughness, GDOWNiDOWNc, for unidirectionally reinforced materials |
| BS ISO 15032-2000 |
修復術.髖關節結構試驗 |
Prostheses - Structural testing of hip joints |
| BS ISO 15033-2000 |
塑料.用高效液相色譜分析法測定己內酰胺及其周期和線性集聚物 |
Plastics - Determination of caprolactam and its cyclic and linear oligomers by HPLC |
| BS ISO 15034-2000 |
化合物.預浸料坯.樹脂流動的測定 |
Composites - Prepregs - Determination of resin flow |
| BS ISO 15037-1-1999 |
道路車輛.車輛動力學試驗方法.第1部分:客車的一般條件 |
Road vehicles - Vehicle dynamics test methods - General conditions for passenger cars |
| BS ISO 15037-2-2003 |
道路車輛.車輛動力學試驗方法.重型車輛和公共汽車的一般條件 |
Road vehicles - Vehicle dynamics test methods - General conditions for heavy vehicles and buses |
| BS ISO 15038-1999 |
塑料.不飽和聚酯熱固材料的有機聚酯交聯劑.活性氧含量的測定 |
Plastics - Organic-perester crosslinking agents for unsaturated-polyester thermosetting materials - Determination of active-oxygen content |
| BS ISO 15040-2000 |
復合物.預浸料坯.膠凝時間的測定 |
Composites - Prepregs - Determination of gel time |
| BS ISO 1505-1993 |
紡織機械.染整設備的有關寬度.額定寬度范圍和定義 |
Textile machinery - Widths relating to dyeing and finishing machines - Definitions and range of nominal widths |
| BS ISO 15072-2000 |
帶有米制細牙螺紋法蘭的六角螺栓.小型系列.產品等級A |
Hexagon bolts with flange with metric fine pitch thread - Small series - Product grade A |
| BS ISO 15078-1998 |
林業機械.原木裝載機.雙層駕駛員控制的操作方法和位置 |
Machinery for forestry - Log loaders - Location and method of operation of two-lever operator controls |
| BS ISO 15086-1-2001 |
液力傳動.件和系統中液載噪音特性的測定.說明 |
Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Hydraulic fluid power - Determination of the fluid borne noise characteristics of components and systems - Introduction |
| BS ISO 15086-2-2000 |
液壓動力.件和系統中液載噪音特性的測定.管道液流中聲音速度的測量 |
Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Measurement of speed of sound in a fluid in a pipe |
| BS ISO 15100-2001 |
塑料.增強纖維.短切原絲.松密度的測定 |
Plastics - Reinforcement fibres - Chopped strands - Determination of bulk density |
| BS ISO 15105-1-2002 |
塑料.薄模和薄模紙.用壓差法測定氣體穿透率 |
Plastics - Film and sheeting - Determination of gas-transmission rate - Differential-pressure method |
| BS ISO 15105-2-2003 |
塑料.薄膜和片材.氣體傳輸率的測定.等壓法 |
(Plastics - Film and sheeting - Determination of gas-transmission rate - Equal-pressure method) |
| BS ISO 15113-2000 |
橡膠.摩擦特性的測定 |
Rubber - Determination of frictional properties |
| BS ISO 15117-1-2004 |
煤流動性.料斗抖動 |
|
| BS ISO 15142-1-2003 |
外科植入物.金屬髓內插釘系統.髓內插釘 |
(Implants for surgery - Metal intramedullary nailing systems - Intramedullary nails) |
| BS ISO 15142-2-2003 |
外科植入物.金屬髓內插釘系統.鎖定件 |
(Implants for surgery - Metal intramedullary nailing systems - Locking components) |
| BS ISO 15142-3-2003 |
外科植入物.金屬骨髓腔內插釘系統.連接設備和擴孔鉆直徑測量 |
(Implants for surgery - Metal intramedullary nailing systems - Connection devices and reamer diameter measurements) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com