標準號 |
中文名稱 |
英文名稱 |
| BS EN ISO 7518-1999 |
建筑制圖.拆除和重建的簡化表示法 |
(Construction drawings - Simplified representation of demolition and rebuilding) |
| BS EN ISO 7519-1997 |
技術制圖.建筑制圖.總體布置圖和構件圖表示法的一般原理 |
(Technical drawings - Construction drawings - General principles of presentation for general arrangement and assembly drawings) |
| BS EN ISO 7536-1996 |
石油及其產品的試驗方法.石油產品.汽油耐氧化性測定.誘導期方法 |
(Methods of test for petroleum and its products - Petroleum products - Determination of oxidation stability of gasoline - Induction period method) |
| BS EN ISO 7539-1-1988 |
金屬和合金的腐蝕.腐蝕應力試驗.第1部分:試驗程序的通用指南 |
(Corrosion of metals and alloys - Stress corrosion testing - General guidance on testing procedures) |
| BS EN ISO 7539-2-1990 |
金屬和合金的腐蝕.應力腐蝕試驗.第2部分:彎曲梁試樣的制備和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of bent-beam specimens) |
| BS EN ISO 7539-3-1990 |
金屬和合金的耐腐蝕性.應力腐蝕試驗.第3部分:U型彎曲試樣的制備和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of U-bend specimens) |
| BS EN ISO 7539-4-1990 |
金屬和合金的腐蝕.應力腐蝕試驗.第4部分:單向載荷拉伸試樣的制備和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of uniaxially loaded tension specimens) |
| BS EN ISO 7539-5-1990 |
金屬和合金的腐蝕.應力腐蝕試驗.第5部分:C-環形試樣的制備和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Method for the preparation and use of C-ring specimens) |
| BS EN ISO 7539-6-2003 |
金屬和合金的腐蝕.應力腐蝕試驗.恒定負荷或恒定位移條件下試驗用預破裂試樣的制備和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of pre-cracked specimens for tests under constant load or constant displacement) |
| BS EN ISO 7539-7-1990 |
金屬和合金的腐蝕.應力腐蝕試驗.第7部分:慢速應變率試驗 |
(Corrosion of metals and alloys - Stress corrosion testing - Slow strain rate testing) |
| BS EN ISO 7539-7-2005 |
金屬與合金的腐蝕.應力腐蝕試驗.慢速率應力試驗方法 |
|
| BS EN ISO 7551-1997 |
牙科吸收點 |
(Dental absorbent points) |
| BS EN ISO 7579-1991 |
染料.有機溶劑中染料溶解度的測定.重力儀法 |
(Dyestuffs - Determination of solubility of dyestuffs in organic solvents - Gravimetric method) |
| BS EN ISO 7590-2001 |
鋼絲輸送帶.總厚度和覆層厚度的測量方法 |
(Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness) |
| BS EN ISO 7622-1-1996 |
鋼絲芯線輸送機皮帶.縱向牽引試驗.第1部分:伸長的測量 |
(Steel cord conveyor belts - Longitudinal traction test - Measurement of elongation) |
| BS EN ISO 7622-2-1996 |
鋼絲芯線輸送機皮帶.縱向牽引試驗.第2部分:抗拉強度的測量 |
(Steel cord conveyor belts - Longitudinal traction test - Measurement of tensile strength) |
| BS EN ISO 7623-1996 |
鋼絲芯線輸送機皮帶.纜索涂層粘合力試驗.最初試驗和后期處理 |
(Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment) |
| BS EN ISO 7662-1996 |
橡膠和塑料軟管.內襯磨損的測定 |
(Rubber and plastics hoses - Determination of abrasion of lining) |
| BS EN ISO 7711-1-1998 |
牙科用旋轉器械.金剛鉆器具.尺寸、要求、作標記和包裝 |
(Dental rotary instruments - Diamond instruments - Dimensions, requirements, marking and packaging) |
| BS EN ISO 7711-2-1993 |
牙科用旋轉器械.金剛鉆器具.第2部分:圓盤刀 |
(Dental rotary instruments - Diamond instruments - Discs) |
| BS EN ISO 7711-3-1993 |
牙科用旋轉器械.金剛鉆器具.磨粒尺寸、名稱與符號和色碼 |
(Dental rotary instruments - Diamond instruments - Grit sizes, designation and colour code) |
| BS EN ISO 7711-3-2005 |
牙科學.金剛石旋轉器械.磨粒尺寸、標注與彩色編碼 |
|
| BS EN ISO 7711-3-2005 |
牙科學.金剛石旋轉器械.磨粒尺寸、標注與彩色編碼 |
|
| BS EN ISO 7719-1998 |
扭矩型全金屬六角螺母.1型:5,8和10級特性 |
(Prevailing torque type all-metal hexagon nuts, style 1. Property classes 5, 8 and 10) |
| BS EN ISO 772-2001 |
流體比重測定.詞匯和符號 |
(Hydrometric determinations - Vocabulary and symbols) |
| BS EN ISO 7721-2-1995 |
埋頭螺釘.十字凹頭深度 |
(Countersunk flat head screws - Penetration depth of cross recesses) |
| BS EN ISO 7726-2001 |
熱環境的人類工效學.物理量測量?jī)x器 |
(Ergonomics of the thermal environment - Instruments for measuring physical quantities) |
| BS EN ISO 7730-1995 |
適度的熱環境.PMV和PPD指標的測定.合適的熱條件規范 |
(Moderate thermal environments - Determination of the PMV and PPD indices and specification of the conditions for thermal comfort) |
| BS EN ISO 7751-1997 |
橡膠和塑料軟管和軟管組件.試驗壓力和爆破壓力與設計工作壓力的比值 |
(Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure) |
| BS EN ISO 7779-2001 |
聲學.信息技術設備和電信設備發出的空氣噪聲的測量 |
(Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment) |
| BS EN ISO 7783-2-1999 |
涂料和清漆.外部磚石工程和混凝土用涂覆材料和涂覆系統.水蒸氣滲透率的測定和分類 |
(Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Determination and classification of water-vapour transmission rate (permeability)) |
| BS EN ISO 7785-1-1999 |
手持式牙科器械.高速空氣渦輪鉆頭 |
(Dental handpieces - High-speed air turbine handpieces) |
| BS EN ISO 7785-2-1998 |
牙鉆手柄.直的和齒角型牙鉆手柄 |
(Dental handpieces - Straight and geared angle handpieces) |
| BS EN ISO 7786-2001 |
牙科用旋轉器械.實驗室研磨器械 |
(Dental rotary instruments - Laboratory abrasive instruments) |
| BS EN ISO 7787-2-2001 |
牙科旋轉器械.切刀.實驗室用硬質合金切刀 |
(Dental rotary instruments - Cutters - Carbide laboratory cutters) |
| BS EN ISO 7787-4-2002 |
牙科用旋轉器械.切割刀具.實驗室用小型硬質合金刀具 |
(Dental rotary instruments - Cutters - Miniature carbide laboratory cutters) |
| BS EN ISO 7799-2000 |
金屬材料.厚度3mm或小于3mm的板材或帶材.反向彎曲試驗 |
(Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test) |
| BS EN ISO 780-1999 |
包裝.貨物搬運的圖形標志 |
(Packaging - Pictorial marking for handling of goods) |
| BS EN ISO 7822-1999 |
紡織玻璃纖維增強塑料.空隙量測定.灼燒損失、機械粉碎和統計計數法 |
(Textile glass reinforced plastics - Determination of void content - Loss on ignition, mechanical disintegration and statistical counting methods) |
| BS EN ISO 7823-1-2003 |
塑料.聚甲基丙烯酸甲酯板材.類型、尺寸和特性.澆注薄板材 |
(Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Cast sheets) |
| BS EN ISO 7823-2-2003 |
塑料.聚甲基丙烯酸甲酯板材.類型、尺寸和特性.擠塑片材 |
(Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Extruded sheets) |
| BS EN ISO 7823-3-2004 |
塑料.聚甲基丙烯酸甲酯板材.類型、尺寸和特性.連續澆注薄板材 |
|
| BS EN ISO 7823-3-2004 |
塑料.聚甲基丙烯酸甲酯板材.類型、尺寸和特性.連續澆注薄板材 |
|
| BS EN ISO 7827-1996 |
水的質量.對有機化合物含水介質估值,溶解有機碳(DOC)的分析法 |
(Water quality - Evaluation in an aqueous medium of the ’ultimate’ aerobic biodegradability of organic compounds - Method by analysis of dissolved organic carbon (DOC)) |
| BS EN ISO 7840-1995 |
小型船舶.抗燃燒燃料軟管 |
(Small craft - Fire resistant fuel hoses) |
| BS EN ISO 7840-2004 |
小艇.耐火燃油軟管 |
|
| BS EN ISO 7854-1996 |
橡膠或塑料涂覆織物.耐折曲損壞性的測定(動態法) |
(Rubber- or plastics-coated fabrics - Determination of resistance to damage by flexing) |
| BS EN ISO 7864-1993 |
一次性使用無菌皮下注射針頭 |
(Sterile hypodermic needles for single use) |
| BS EN ISO 787-10-1993 |
顏料和填充劑的一般試驗方法.第10部分:密度的測定.比重瓶法 |
(General methods of test for pigments and extenders - Determination of density - Pyknometer method) |
| BS EN ISO 787-11-1982 |
顏料和填充劑的一般試驗方法.壓實后壓實容積和表觀密度的測定 |
(General methods of test for pigments and extenders - Determination of tamped volume and apparent density after tamping) |
| BS EN ISO 787-13-2002 |
顏料和體質顏料的通用試驗方法.測定水溶性硫酸鹽、氯化物和硝酸鹽 |
(General methods of test for pigments and extenders - Determination of water-soluble sulfates, chlorides and nitrates) |
| BS EN ISO 787-14-2002 |
顏料和體質顏料的通用試驗方法.測定水萃取物電阻率 |
(General methods of test for pigments and extenders - Determination of resistivity of aqueous extract) |
| BS EN ISO 787-15-1988 |
顏料和填充劑的一般試驗方法.同類著色顏料耐光性的比較 |
(General methods of test for pigments and extenders - Comparison of resistance to light of coloured pigments of similar types) |
| BS EN ISO 787-16-1988 |
顏料和填充劑的一般試驗方法.相對著色力(或等效著色值)和著色顏料還原后的顏色的測定.目視比較法 |
(General methods of test for pigments and extenders - Determination of relative tinting strength (or equivalent colouring value) and colour on reduction of coloured pigments - Visual comparison method) |
| BS EN ISO 787-18-1995 |
顏料和填充劑的一般試驗方法.第18部分:篩渣的測定.機械沖洗步驟 |
(General methods of test for pigments and extenders - Determination of residue on sieve - Mechanical flushing procedure) |
| BS EN ISO 787-19-1995 |
顏料和填充劑的一般試驗方法.水溶性硝酸鹽的測定(水楊酸法) |
(General methods of test for pigments and extenders - Determination of water-soluble nitrates (Salicylic acid method)) |
| BS EN ISO 787-1995 |
顏料的一般試驗方法.第19部分:水溶性硝酸鹽的測定(水楊酸法) |
(General methods of test for pigments and extenders. Determination of water-soluble nitrates (Salicylic acid method)) |
| BS EN ISO 787-2-1982 |
顏料和填充劑的一般試驗方法.105 ℃時揮發物的測定 |
(General methods of test for pigments and extenders - Determination of matter volatile at 105 鳦) |
| BS EN ISO 787-23-1980 |
顏料和填充劑的一般試驗方法.第23部分:密度的測定(用離心機消除夾帶的空氣) |
(General methods of test for pigments and extenders - Determination of density (using a centrifuge to remove entrained air)) |
| BS EN ISO 787-24-1988 |
顏料和填充劑的一般試驗方法.第24部分:著色顏料的相對著色力和白色顏料的相對散射力的測定.光度法 |
(General methods of test for pigments and extenders - Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments - Photometric methods) |
| BS EN ISO 787-3-2001 |
顏料和填充劑的一般試驗方法.水溶物的測定.熱萃取法 |
General methods of test for pigments and extenders - Determination of matter soluble in water - Hot extraction method |
| BS EN ISO 787-5-1982 |
顏料和填充劑的一般試驗方法.第5部分:吸油值的測定 |
(General methods of test for pigments and extenders - Determination of oil absorption value) |
| BS EN ISO 787-8-2001 |
顏料和填充劑的一般試驗方法.水溶物的測定.冷萃取法 |
(General methods of test for pigments and extenders - Determination of matter soluble in water - Cold extraction method) |
| BS EN ISO 787-9-1982 |
顏料和填充劑的一般試驗方法.第9部分:水懸浮液pH值的測定 |
(General methods of test for pigments and extenders - Determination of pH value of aqueous suspension) |
| BS EN ISO 7885-2001 |
無菌、一次性牙科用注射針頭 |
(Sterile dental injection needles for single use) |
| BS EN ISO 7886-1-1997 |
一次性使用無菌皮下注射器.第1部分:人工注射器 |
(Sterile hypodermic syringes for single use - Syringes for manual use) |
| BS EN ISO 7886-2-1996 |
一次性使用無菌皮下注射器.人工注射器 |
(Sterile hypodermic syringes for single use - Syringes for use with power-driven syringe pumps) |
| BS EN ISO 7887-1995 |
水質.顏色測定和檢驗 |
Water quality - Examination and determination of colour |
| BS EN ISO 7899-1-1999 |
水質.表面和廢水中大腸桿菌計數和檢測.液體介質中培養的小型化方法(最可能的數目) |
Water quality - Detection and enumeration of intestinal enterococci in surface and waste water - Miniaturized method (Most probable number) for surface and waste water |
| BS EN ISO 7899-2-2000 |
水質.水表面和廢水中大腸桿菌的計數和檢測.膜過濾法 |
(Water quality - Detection and enumeration of intestinal enterococci in surface and waste water - Membrane filtration method) |
| BS EN ISO 7932-1994 |
微生物學.芽胞桿菌計數的通用指南.30℃的菌落計數技術 |
Microbiology - General guidance for the enumeration of Bacillus cereus - Colony-count technique at 30 鳦 |
| BS EN ISO 7932-2004 |
食品和動物飼料的微生物學.蠟狀芽孢桿菌計數的水平方法.30℃時菌落計數技術 |
|
| BS EN ISO 7933-2005 |
熱環境的人類工效學.通過計算預測的熱應變對熱應力的分析測定和說明 |
|
| BS EN ISO 7937-2004 |
食品和動物飼料的微生物學.ostridium perfringens計數的水平方法.菌落計數技術 |
|
| BS EN ISO 7937-2004 |
食品和動物飼料的微生物學.$7i梭菌屬perfringens$7r計數的水平方法.菌落計數技術 |
|
| BS EN ISO 7937-2004 |
食品和動物飼料的微生物學.梭菌屬perfringens計數的水平方法.菌落計數技術 |
|
| BS EN ISO 7944-1998 |
光學和光學儀器.基準波長 |
Optics and optical instruments - Reference wavelengths |
| BS EN ISO 7965-2-1995 |
包裝.包裝袋.墜落試驗.第2部分:由柔性熱塑性塑料簿膜制成的包裝袋 |
Sacks - Drop test - Sacks made from thermoplastic flexible film |
| BS EN ISO 7998-1996 |
光學和光學儀器.眼鏡框架.等義術語表及詞匯 |
Optics and optical instruments - Spectacle frames - Vocabulary and lists of equivalent terms |
| BS EN ISO 801-1-1995 |
紙漿.成批銷售質量的測定.板式包裝紙漿 |
Pulps - Determination of saleable mass in lots - Pulp baled in sheet form |
| BS EN ISO 801-3-1995 |
紙漿.成批銷售質量的測定.承載式包 |
Pulps - Determination of saleable mass in lots - Unitized bales |
| BS EN ISO 8028-2000 |
無空氣涂料噴涂用塑料和/或橡膠軟管組件.規范 |
Rubber and/or plastics hose assemblies for airless paint spraying - Specification |
| BS EN ISO 8030-1998 |
橡膠和塑料軟管.易燃性的試驗方法 |
Rubber and plastics hoses - Method of test for flammability |
| BS EN ISO 8031-1997 |
橡膠和塑料軟管和軟管組件.電阻的測定 |
Rubber and plastics hoses and hose assemblies - Determination of electrical resistance |
| BS EN ISO 8044-2000 |
金屬和合金的腐蝕性.基本術語和定義 |
Corrosion of metals and alloys - Basic terms and definitions |
| BS EN ISO 8067-1995 |
軟質泡沫聚合材料.抗撕裂強度的測定 |
(Flexible cellular polymeric materials - Determination of tear strength) |
| BS EN ISO 8092-1-1998 |
道路車輛.線路板上電線配件的連接.單極連接接頭標記.尺寸和特殊要求 |
(Road vehicles - Connections for on-board electrical wiring harnesses - Tabs for single-pole connections - Dimensions and specific requirements) |
| BS EN ISO 8092-2-2002 |
道路車輛.車載電氣線束的連接.定義、試驗方法、一般性能要求 |
(Road vehicles - Connections for on-board electrical wiring harnesses - Definitions, test methods and general performance requirements) |
| BS EN ISO 8092-3-1999 |
道路車輛.電子線路板上電線束用連接.多極連接的標記.尺寸和特殊要求 |
(Road vehicles - Connections for on-board electrical wiring harnesses - Tabs for multi-pole connections - Dimensions and specific requirements) |
| BS EN ISO 8092-4-1999 |
道路車輛.電子線路板上電線束用連接.單極和多極連接用銷釘.尺寸和特殊要求 |
(Road vehicles - Connections for on-board electrical wiring harnesses - Pins for single- and multi-pole connections - Dimensions and specific requirements) |
| BS EN ISO 8099-2001 |
小型船舶.衛生間廢棄物積集系統 |
(Small craft - Toilet waste retention systems) |
| BS EN ISO 8106-2004 |
玻璃容器.用重量法測定容量.試驗方法 |
|
| BS EN ISO 8106-2004 |
玻璃容器.用重量法測定容量.試驗方法 |
|
| BS EN ISO 8106-2004 |
玻璃容器.用重量法測定容量.試驗方法 |
|
| BS EN ISO 8113-2004 |
玻璃容器.抗垂直負載.試驗方法 |
|
| BS EN ISO 8130-14-2004 |
粉末涂料.術語 |
|
| BS EN ISO 8166-2003 |
電阻焊.用恒定焊機設定值評定點焊電極使用壽命的規程 |
(Resistance welding - Procedure for the evaluation of the life of spot welding electrodes using constant machine settings) |
| BS EN ISO 81714-1-2001 |
用于產品技術文獻的圖形符號的設計.基本規則 |
(Design of graphical symbols for use in the technical documentation of products - Basic rules) |
| BS EN ISO 8178-1-1996 |
往復式內燃機.排氣污染測定.第1部分:氣體和顆粒物質排放污染的試驗臺測定法 |
(Reciprocating internal combustion engines - Exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions) |
| BS EN ISO 8178-2-1997 |
往復式內燃機.排氣污染測定.第2部分:氣體和顆粒物質排放污染的定點測量 |
(Reciprocating internal combustion engines - Exhaust emission measurement - Measurement of gaseous and particulate exhaust emissions at site) |
| BS EN ISO 8178-4-1996 |
往復式內燃機.排氣污染測定.第4部分:不同發動機應用的試驗周期 |
(Reciprocating internal combustion engines - Exhaust emission measurement - Test cycles for different engine applications) |
| BS EN ISO 8178-5-1997 |
往復式內燃機排氣污染指數的測定.第5部分:燃料試驗 |
(Reciprocating internal combustion engines - Exhaust emission measurement - Test fuels) |
| BS EN ISO 8178-6-2001 |
往復式內燃機.廢氣排放測定.測量結果和試驗的報告 |
(Reciprocating internal combustion engines - Exhaust emission measurement - Report of measuring results and tests) |
| BS EN ISO 8185-1998 |
醫用增濕器.增濕系統的一般要求 |
(Humidifiers for medical use - General requirements for humidification systems) |
| BS EN ISO 8192-1987 |
水質.用活化的污泥抑制氧消耗量的試驗 |
(Water quality - Test for the inhibition of oxygen consumption by activated sludge) |
| BS EN ISO 8205-1-2002 |
電阻焊用水冷輔助連接電纜.雙芯連接電纜的尺寸和要求 |
(Water-cooled secondary connection cables for resistance welding - Dimensions and requirements for double-conductor connection cables) |
| BS EN ISO 8205-2-2002 |
電阻焊用水冷輔助連接電纜.單芯連接電纜的尺寸和要求 |
(Water-cooled secondary connection cables for resistance welding - Dimensions and requirements for single-conductor connection cables) |
| BS EN ISO 8205-3-1997 |
電阻焊接水冷次級線圈連接電纜.第3部分:試驗要求 |
(Water-cooled secondary connection cables for resistance welding - Test requirements) |
| BS EN ISO 8222-2002 |
石油測量系統.校準.用容積基準測量罐的校正溫度 |
(Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks) |
| BS EN ISO 8224-1-2003 |
移動式灌溉機械.操作特性、實驗室和現場試驗方法 |
(Traveller irrigation machines - Operational characteristics and laboratory and field test methods) |
| BS EN ISO 8230-1998 |
使用全氯乙烯的干洗機的安全要求 |
(Safety requirements for dry-cleaning machines using perchloroethylene) |
| BS EN ISO 8249-2000 |
焊接.奧氏體和雙重奧氏體鐵氧體鉻鎳不銹鋼焊接金屬中鐵素體數的測定 |
(Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals) |
| BS EN ISO 8253-1-1998 |
聲學.測聲試驗方法.基本純聲調空氣和骨傳導聲測定 |
(Acoustics - Audiometric test methods - Basic pure tone air and bone conduction threshold audiometry) |
| BS EN ISO 8253-2-1993 |
聲學.聽力試驗方法.帶純音和窄頻帶信號的聲場測聽術 |
(Acoustics - Audiometric test methods - Sound field audiometry with pure tone and narrow-band test signals) |
| BS EN ISO 8253-3-1998 |
聲學.聽力測試方法.語言測聽術 |
(Acoustics - Audiometric test methods - Speech audiometry) |
| BS EN ISO 8254-1-2000 |
紙和紙板.光澤度的測量.用聚光束的75度,TAPPI法 |
(Paper and board - Measurement of specular gloss - 75 ?gloss with a converging beam, TAPPI method) |
| BS EN ISO 8254-2-2003 |
紙和紙板.光澤度的測量.用平行光束的75度,DIN法 |
(Paper and board - Measurement of specular gloss - 75 ?gloss with a parallel beam, DIN method) |
| BS EN ISO 8256-1991 |
塑料.拉伸沖擊強度測定 |
(Plastics - Determination of tensile-impact strength) |
| BS EN ISO 8256-2004 |
塑料.拉伸沖擊強度測定 |
|
| BS EN ISO 8261-2002 |
乳和乳制品.用于微生物檢驗的試驗樣品、初始懸浮液和十倍制稀釋液的制備的通用指南 |
(Milk and milk products - General guidance for the preparation of test samples, initial suspensions and decimal dilutions for microbiological examination) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com