標準號 |
中文名稱 |
英文名稱 |
| DIN EN ISO 14125 Berichtigung 1-2003 |
DINENISO14125-1998的技術勘誤 |
(Corrigenda to DIN EN ISO 14125:1998-06 (EN ISO 14125:1998/AC:2002)) |
| DIN EN ISO 14125-1998 |
纖維增強塑料.彎曲性能測定 |
(Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998); German version EN ISO 14125:1998) |
| DIN EN ISO 14126 Berichtigung 1-2003 |
DINENISO14126-2000的技術勘誤 |
(Corrigenda to DIN EN ISO 14126:2000-12 (EN ISO 14126:1999/AC:2002)) |
| DIN EN ISO 14126-2000 |
纖維增強塑料混合物.水平方向壓縮能力的測定 |
(Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999); German version EN ISO 14126:1999) |
| DIN EN ISO 14129-1998 |
纖維增強塑料.測定切應力/切變形用45度層壓塑料的抗伸試驗.層面中抗剪模數的曲線 |
(Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain reponse, including the in-plane schear modulus and strength, by45 tension test method (ISO 14129:1997); German version EN ISO 14129:1997) |
| DIN EN ISO 14130-1998 |
纖維增強塑料.用短梁按三點法測定表面層間抗剪強度 |
(Fibre reinforced plastic composites - Determination of apparent interlaminar shear strength by short beam-method (ISO 14130:1997); German version EN ISO 14130:1997) |
| DIN EN ISO 14159-2004 |
機械安全.機械設計的衛生要求 |
|
| DIN EN ISO 14160-1998 |
源于動物成份一次性用醫學產品的消毒.液體消毒液消毒的確認和例行監測 |
(Sterilization of single-use medical devices incorporating materials of animal origin - Validation and routine control of sterilization by liquid chemical sterilants (ISO 14160:1998); German version EN ISO 14160:1998) |
| DIN EN ISO 14161-2001 |
醫療保健產品的消毒.生物指示劑.結果的選擇、使用和解釋導則 |
(Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2000); German version EN ISO 14161:2000) |
| DIN EN ISO 14163-1999 |
聲學.消音器噪聲控制指南 |
(Acoustics - Guidelines for noise control by silencers (ISO 14163:1998); German version EN ISO 14163:1998) |
| DIN EN ISO 14172-2004 |
焊接消耗品.鎳和鎳合金的手工金屬弧焊接的藥皮電焊條.分類 |
|
| DIN EN ISO 14181-2001 |
動物飼料.有機氯化物農藥殘留物的測定.氣相色譜法 |
(Animal feeding stuffs - Determination of residues of organochlorine pesticides - Gas chromatographic method (ISO 14181:2000); German version EN ISO 14181:2000) |
| DIN EN ISO 14182-2000 |
動物飼料.有機磷殺蟲劑殘留物的測定.氣相色譜法 |
(Animal feeding stuffs - Determination of residues of organophosphorus pesticides - Gas chromatographic method (ISO 14182:1999); German version EN ISO 14182:1999) |
| DIN EN ISO 14184-1-1999 |
紡織物.甲醛含量的測定.第1部分:游離和水解甲醛(水萃取法) |
(Textiles - Determination of formaldehyde - Part 1: Free and hydrolyzed formaldehyde (water extraction method) (ISO 14184-1:1998); German version EN ISO 14184-1:1998) |
| DIN EN ISO 14184-2-1998 |
織物.甲醛含量的測定.第2部分:游離甲醛(水蒸氣吸收法) |
(Textiles - Determination of formaldehyde - Part 2: Released formaldehyde (vapour absorption method) (ISO 14184-2:1998); German version EN ISO 14184-2:1998) |
| DIN EN ISO 1421-1998 |
用橡膠和塑料涂層的織物.抗拉強度和斷裂伸長的測定 |
(Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421:1998); German version EN ISO 1421:1998) |
| DIN EN ISO 14246-2001 |
可運輸氣瓶.氣瓶閥.生產試驗和檢驗 |
(Transportable gas cylinders - Gas cylinder valves - Manufacturing tests and inspections (ISO 14246:2001); German version EN ISO 14246:2001) |
| DIN EN ISO 14253-1 Bb.1-2000 |
幾何產品規范(GPS).通過對工件和測量設備的測量進行檢驗.產品檢驗過程中測量設備的校正,在GPS測量中不確定 |
(Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO/TS 14253-2:1999 |
| DIN EN ISO 14253-1-1999 |
幾何產品規范(GPS).通過測量檢驗工件和測量儀器.第1部分:用規范對一致性或不一致性進行檢驗的判定規則 |
(Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformance or non-conformance with specifications (ISO 14253-1:1998): German version EN ISO 14253-1:1998) |
| DIN EN ISO 14257-2002 |
聲學.評價其聲響性能用工作室空間聲音分布曲線的測量及參數描述(ISO14257:2001) |
(Acoustics - Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance (ISO 14257:2001); German version EN ISO 14257:2001) |
| DIN EN ISO 14270-2002 |
電阻點焊、滾焊和凸焊機械剝離試驗的規程和樣品尺寸 |
(Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds (ISO 14270:2000); German version EN ISO 14270:2001) |
| DIN EN ISO 14271-2002 |
電阻點焊、凸焊和滾焊的維氏硬度試驗(低荷載和超微硬度) |
(Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness) (ISO 14271:2000); German version EN ISO 14271:2001) |
| DIN EN ISO 14272-2002 |
電阻點焊和凸焊十字形拉力試驗的規程和樣品尺寸 |
(Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds (ISO 14272:2000); German version EN ISO 14272:2001) |
| DIN EN ISO 14273-2002 |
電阻點焊、縫焊和凸焊的抗剪試驗用樣品尺寸和程序(ISO14273:2000) |
(Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds (ISO 14273:2000); German version EN ISO 14273:2002) |
| DIN EN ISO 14284-2003 |
鋼鐵.測定化合物用樣品的取樣和制備方法 |
(Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996); German version EN ISO 14284:2002) |
| DIN EN ISO 14310-2003 |
石油和天然氣工業.下井設備.封隔器和橋塞 |
(Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2001); German version EN ISO 14310:2001; German and English texts) |
| DIN EN ISO 14314-2004 |
往復式內燃機.反沖起動設備.一般安全要求 |
|
| DIN EN ISO 14327-2004 |
電阻焊接.電阻點焊、凸焊和縫焊的可焊性凸角的測定過程 |
|
| DIN EN ISO 14344-2005 |
焊接和類似工藝.熔化和氣體保護電焊過程.消耗品的采購指南 |
|
| DIN EN ISO 14344-2005 |
焊接和類似工藝.熔化和氣體保護電焊過程.消耗品的采購指南 |
|
| DIN EN ISO 14372-2002 |
焊接消耗物.通過測量可擴散氫測定手工金屬電弧焊電極的抗?jié)裥?/td>
| (Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen (ISO 14372:2000); German version EN ISO 14372:2002) |
| DIN EN ISO 14402-1999 |
水質.流量分析方法測定苯酚指數(FIA和CFA) |
(Water quality - Determination of phenol index by flow analysis (FIA and CFA) (ISO 14402:1999); German version EN ISO 14402:1999) |
| DIN EN ISO 14403-2002 |
水質.用連續流量分析法測定總氰化物和游離氰化物含量 |
(Water quality - Determination of total cyanide and free cyanide by continuous flow analysis (ISO 14403:2002); German version EN ISO 14403:2002) |
| DIN EN ISO 14408-2005 |
激光手術用氣管掐管.標識及隨機文件要求 |
|
| DIN EN ISO 14419-1999 |
紡織材料.耐油性.耐碳氫化合物的試驗 |
(Textiles - Oil repellency - Hydrocarbon resistance test (ISO 14419:1998); German version EN ISO 14419:1999) |
| DIN EN ISO 14438-2002 |
建筑物用玻璃.能量平衡值的測定.計算法 |
(Glass in building - Determination of energy balance value - Calculation method (ISO 14438:2002); German version EN ISO 14438:2002) |
| DIN EN ISO 14453-1998 |
紙漿.丙酮-溶解物質的測定 |
(Pulps - Determination of acetone-soluble matter (ISO 14453:1997); German version EN ISO 14453:1998) |
| DIN EN ISO 14460-2002 |
汽車賽車手防護服.防熱和防火焰.性能要求和檢驗方法 |
(Protective clothing for automobile racing drivers - Protection against heat and flame - Performance requirements and test methods (ISO 14460:1999 + Amd. 1:2002) (includes Corrigendum AC:1999 and Amendment A1:2002); German version EN ISO 14460:1999 + AC:1 |
| DIN EN ISO 14501-1999 |
奶和奶粉.黃曲霉毒素M1含量的測定.用immunoaffinitiy色譜法提煉和用高效液體色譜分析法測定 |
(Milk and milk powder - Determination of aflatoxin M content - Clean-up by immunoaffinity chromatographie and determination by high-performance liquid chromatography (ISO 14501:1998); German version EN ISO 14501:1998) |
| DIN EN ISO 14509-2001 |
小型船舶.動力娛樂船發出的氣載噪聲的測定 |
(Small craft - Measurement of airborne sound emitted by powered recreational craft (ISO 14509:2000); German version EN ISO 14509:2000) |
| DIN EN ISO 14509/A1-2004 |
小艇.動力娛樂用艇發出的空氣噪音的測量.修改件1 |
|
| DIN EN ISO 14526-1-2000 |
塑料.酚醛粉末模塑化合物(PF-PMCs).第1部分:名稱與符號系統和基礎規范 |
(Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14526-1:1999); German version EN ISO 14526-1:1999) |
| DIN EN ISO 14526-2-2000 |
塑料.酚醛粉末模塑化合物(PF-PMCs).第2部分:試樣的準備和特性的測定 |
(Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14526-2:1999); German version EN ISO 14526-2:1999) |
| DIN EN ISO 14526-3-2000 |
塑料.酚醛粉末模塑化合物(PF-PMCs).第3部分:對所選模塑化合物的要求 |
(Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14526-3:1999); German version EN ISO 14526-3:1999) |
| DIN EN ISO 14527-1-2000 |
塑料.脲甲醛和脲/蜜胺甲醛粉末模塑化合物(UF-和UF/MF-PMCs).第1部分:名稱與符號系統和基礎規范 |
(Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14527-1:1999); German version EN ISO 14527-1:1999) |
| DIN EN ISO 14527-2-2000 |
塑料.脲甲醛和脲/蜜胺甲醛粉末模塑化合物(UF-和UF/MF-PMCs).第2部分:試樣的準備和特性的測定 |
(Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14527-2:1999); German version EN ISO 14527-2:1999) |
| DIN EN ISO 14527-3-2000 |
塑料.脲甲醛和脲/蜜胺甲醛粉末模塑化合物(UF-和UF/MF-PMCs).第3部分:對所選的模塑化合物的要求 |
(Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14527-3:1999); German version EN ISO 14527-3:1999) |
| DIN EN ISO 14528-1-2000 |
塑料.蜜胺甲醛粉末模塑化合物(MF-PMCs).第1部分:名稱與符號系統和基礎規范 |
(Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14528-1:1999); German version EN ISO 14528-1:1999) |
| DIN EN ISO 14528-2-2000 |
塑料.蜜胺甲醛粉末模塑化合物(MF-PMCs).第2部分:試樣的準備和特性的測定 |
(Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14528-2:1999); German version EN ISO 14528-2:1999) |
| DIN EN ISO 14528-3-2000 |
塑料.蜜胺甲醛粉末模塑化合物(MF-PMCs).第3部分:對所選模塑化合物的要求 |
(Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14528-3:1999); German version EN ISO 14528-3:1999) |
| DIN EN ISO 14529-1-2000 |
塑料.蜜胺/酚醛粉末模塑化合物(MP-PMCs).第1部分:名稱與符號系統和基礎規范 |
(Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 1: Designation system and basis for specifications (ISO 14529-1:1999); German version EN ISO 14529-1:1999) |
| DIN EN ISO 14529-2-2000 |
塑料.蜜胺/酚醛粉末模塑化合物(MP-PMCs).第2部分:試樣的準備和特性的測定 |
(Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14529-2:1999); German version EN ISO 14529-2:1999) |
| DIN EN ISO 14529-3-2000 |
塑料.蜜胺/酚醛粉末模塑化合物(MP-PMCs).第3部分:對所選模塑化合物的要求 |
(Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14529-3:1999); German version EN ISO 14529-3:1999) |
| DIN EN ISO 14530-1-2000 |
塑料.非飽和聚酯粉末模塑化合物(UP-PMCs).第1部分:名稱與符號系統和基礎規范 |
(Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 1: Designation system and basis for specifications (ISO 14530-1:1999); German version EN ISO 14530-1:1999) |
| DIN EN ISO 14530-2-2000 |
塑料.非飽和聚酯粉末模塑化合物(UP-PMCs).第2部分:試樣的準備和特性的測定 |
(Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999); German version EN ISO 14530-2:1999) |
| DIN EN ISO 14530-3-2000 |
塑料.非飽和聚酯粉末模塑化合物(UP-PMCs).第3部分:對所選模塑化合物的要求 |
(Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14530-3:1999); German version EN ISO 14530-3:1999) |
| DIN EN ISO 14534-2002 |
眼科光學.接觸鏡片和接觸鏡片護理產品.基本要求 |
(Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2002); German version EN ISO 14534:2002) |
| DIN EN ISO 14539-2002 |
操作型工業機器人.用抓式鉗子進行物品傳遞.詞匯和特征表示 |
(Manipulating industrial robots - Object handling with grasp-type-grippers - Vocabulary and presentation of caracteristics (ISO 14539:2000); German version EN ISO 14539:2001) |
| DIN EN ISO 14554-1-2000 |
焊接質量要求.金屬材料的電阻焊接.第1部分:綜合質量要求 |
(Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements (ISO 14554-1:2000); German version EN ISO 14554-1:2000) |
| DIN EN ISO 14554-2-2000 |
焊接質量要求.金屬材料的電阻焊接.第2部分:基本質量要求 |
(Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements (ISO 14554-2:2000); German version EN ISO 14554-2:2000) |
| DIN EN ISO 14555-1998 |
焊接.金屬材料的電弧螺栓焊接 |
(Welding - Arc stud welding of metallic materials (ISO 14555:1998); German version EN ISO 14555:1998) |
| DIN EN ISO 14556-2000 |
鋼.卻貝V形切痕擺式?jīng)_擊試驗.儀器試驗法 |
(Steel - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2000); German version EN ISO 14556:2000) |
| DIN EN ISO 14557-2003 |
消防水龍帶.橡膠和塑料吸水軟管和軟管組件 |
(Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies (ISO 14557:2002); German version EN ISO 14557:2002) |
| DIN EN ISO 14565-2001 |
動物飼料.維生素A含量的測定.高性能液相色譜法 |
(Animal feeding stuffs - Determination of vitamin A content - Method using high-performance liquid chromatography (ISO 14565:2000); German version EN ISO 14565:2000) |
| DIN EN ISO 14577-1-2003 |
金屬材料.硬度和材料參數的儀器壓痕試驗.第1部分:試驗方法 |
(Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2002); German version EN ISO 14577-1:2002) |
| DIN EN ISO 14577-2-2003 |
金屬材料.硬度和材料參數的儀器壓痕試驗.第2部分:試驗機的檢定和校準 |
(Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2002); German version EN ISO 14577-2:2002) |
| DIN EN ISO 14577-3-2003 |
金屬材料.硬度和材料參數的儀器壓痕試驗.第3部分:硬度標準塊的校準 |
(Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2002); German version EN ISO 14557-3:2002) |
| DIN EN ISO 14579-2002 |
圓柱頭內六角螺釘 |
(Hexalobular socket head cap screws (ISO 14579:2001); German version EN ISO 14579:2001) |
| DIN EN ISO 14580-2002 |
凸頭內六角螺釘 |
(Hexalobular socket cheese head screws (ISO 14580:2001); German version EN ISO 14580:2001) |
| DIN EN ISO 14583-2002 |
平頭內六角螺釘 |
(Hexalobular socket pan head screws (ISO 14583:2001); German version EN ISO 14583:2001) |
| DIN EN ISO 14584-2002 |
半埋頭內六角螺釘 |
(Hexalobular socket raised countersunk head screws (ISO 14584:2001); German version EN ISO 14584:2001) |
| DIN EN ISO 14585-2002 |
平頭內六角攻絲螺釘 |
(Hexalobular socket pan head tapping screws (ISO 14585:2001); German version EN ISO 14585:2001) |
| DIN EN ISO 14586-2002 |
沉頭內六角攻絲螺釘 |
(Hexalobular socket countersunk head tapping screws (ISO 14586:2001); German version EN ISO 14586:2001) |
| DIN EN ISO 14587-2002 |
半沉頭(橢圓形)內六角攻絲螺釘 |
(Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2001); Geman version EN ISO 14587:2001) |
| DIN EN ISO 14588-2001 |
沉頭鉚釘.術語和定義 |
(Blind rivets - Terminology and definitions (ISO 14588:2000); German version EN ISO 14588:2000) |
| DIN EN ISO 14589-2001 |
沉頭鉚釘.機械試驗 |
(Blind rivets - Mechanical testing (ISO 14589:2000); German version EN ISO 14589:2000) |
| DIN EN ISO 14593-2005 |
水質.水介質中有機化合物最大需氧生物降解能力的評價.密封容器中無機碳分析法(CO2頂空試驗) |
|
| DIN EN ISO 14596-1998 |
礦物油產品.硫含量測定.波長彌散X射線熒光光譜法 |
(Petroleum products - Determination of sulphur content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14596:1998); German version EN ISO 14596:1998) |
| DIN EN ISO 14597-1999 |
礦物油制品.釩和鎳含量的測定.波長分散X射線熒光分析法 |
(Petroleum products - Determination of vanadium and nickel content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14597:1997); German version EN ISO 14597:1999) |
| DIN EN ISO 1460-1995 |
金屬鍍層.鐵類材料的熱浸鍍鋅涂層.用重量測定法測定單位面積重量 |
(Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:1992); German version EN ISO 1460:1994) |
| DIN EN ISO 14602-1998 |
穩定的外科植入物.骨接合術用植入物.特殊要求 |
(Non-active surgical implants - Implants for osteosynthesis - Particular requirements (ISO 14602-1998); German version EN ISO 14602:1995) |
| DIN EN ISO 1461 Bb.1-1999 |
通過鋼上熱鍍鋅產生的鋅鍍層(塊鍍鋅).要求和檢驗 |
(Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods; (ISO 1461:1999); indications of application of this standard) |
| DIN EN ISO 1461-1999 |
通過鋼上熱鍍鋅產生的鋅鍍層(塊鍍鋅).要求和檢驗 |
(Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:1999); German version EN ISO 1461:1999) |
| DIN EN ISO 14616-2004 |
塑料.聚乙烯、乙烯共聚物及其混合物的熱可縮薄膜.收縮應力的測定 |
|
| DIN EN ISO 14620-1-2005 |
航天系統.安全要求.第1部分:系統安全 |
|
| DIN EN ISO 1463-1995 |
金屬和氧化物鍍層.鍍層厚度的測定.顯微鏡法 |
(Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:1982); German version EN ISO 1463:1994) |
| DIN EN ISO 1463-2004 |
金屬和氧化物鍍層.鍍層厚度的測定.顯微鏡法 |
|
| DIN EN ISO 14630-1997 |
非活動外科植入物的一般要求 |
(Non-active surgical implants - General requirements (ISO 14630:1997); German version EN ISO 14630:1997) |
| DIN EN ISO 14631-1999 |
沖擊改良的聚苯乙烯(PS-I)的擠壓片.要求和試驗方法 |
(Extruded sheets of impact-modified polystyrene (PS-I) - Requirements and test methods (ISO 14631:1999); German version EN ISO 14631:1999) |
| DIN EN ISO 14632-1999 |
聚乙烯(PE-HD)的擠壓片材.要求和試驗方法 |
(Extruded sheets of polyethylene (PE-HD) - Requirements and test methods (ISO 14632:1998); German version EN ISO 14632:1998) |
| DIN EN ISO 14644-1-1999 |
無菌室和相關控制環境.第1部分:空氣清潔度分級 |
(Cleanroom and associated controlled environments - Part 1: Classification of air cleanliness (ISO 14644-1:1999); German version EN ISO 14644-1:1999) |
| DIN EN ISO 14644-2-2001 |
無菌室和相關控制環境.第2部分:連續證實與ISO14644-1相符的試驗和監測規范 |
(Cleanrooms and associated controlled environments - Part 2: Specifications for testing and monitoring to prove continued compliance with ISO 14644-1 (ISO 14644-2:2000); German version EN ISO 14644-2:2000) |
| DIN EN ISO 14644-4-2003 |
無菌室和相關受控環境.第4部分:設計、建造和運行 |
(Cleanrooms and associated controlled environments - Part 4: Design, construction and start up (ISO 14644-4:2001); German version EN ISO 14644-4:2001) |
| DIN EN ISO 14644-7-2005 |
潔凈室和相關控制環境.第7部分:分離設備(潔凈空氣罩、手套式操作箱、分離器和微環境) |
|
| DIN EN ISO 14660-1-1999 |
幾何產品規范(GPS).幾何特性.第1部分:一般術語與定義 |
(Geometrical Product Specifications (GPS) - Geometrical features - Part 1: General terms and definitions (ISO 14660-1:1999); German version EN ISO 14660-1:1999) |
| DIN EN ISO 14660-2-1999 |
幾何產品規范(GPS).幾何特性.第2部分:圓柱體和圓錐體中心線的確定、表面中心的確定、確定位置尺寸的要求 |
(Geometrical Product Specifications (GPS) - Geometrical features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature (ISO 14660-2:1999); German version EN ISO 14660-2:1999) |
| DIN EN ISO 14673-1-2002 |
牛奶和牛奶制品.測定硝酸鹽和亞硝酸鹽的含量.第1部分:鎘還原法和光譜測定法 |
(Milk and milk products - Determination of nitrate and nitrite contents - Part 1: Method using cadmium reduction and spectrometry (ISO 14673-1:2001); German version EN ISO 14673-1:2001) |
| DIN EN ISO 14673-1-2004 |
乳和乳制品.硝酸鹽和亞硝酸鹽含量的測定.第1部分:鎘還原和光譜測定法 |
|
| DIN EN ISO 14673-2-2002 |
牛奶和牛奶制品.測定硝酸鹽和亞硝酸鹽的含量.第2部分:分段式流體分析法(常規法) |
(Milk and milk products - Determination of nitrate and nitrite contents - Part 2: Method using segmented flow analysis (Routine method) (ISO 14673-2:2001); German version EN ISO 14673-2:2001) |
| DIN EN ISO 14673-2-2004 |
乳和乳制品.硝酸鹽和亞硝酸鹽含量的測定.第2部分:分層流分析法(常規法) |
|
| DIN EN ISO 14673-3-2002 |
牛奶和牛奶制品.測定硝酸鹽和亞硝酸鹽的含量.第3部分:鎘還原法和帶有流線滲析的流體注入分析法(常規法) |
(Milk and milk products - Determination of nitrate and nitrite contents - Part 3: Method using cadmium reduction and flow injection analysis with in-line dialysis (Routine method) (ISO 14673-3:2001); German version EN ISO 14673-3:2001) |
| DIN EN ISO 14673-3-2004 |
乳和乳制品.硝酸鹽和亞硝酸鹽含量的測定.第3部分:線滲析鎘還原和流注入分析法(常規法) |
|
| DIN EN ISO 14675-2003 |
牛奶和牛奶制品.競爭酶免疫分析法的標準化描述指南.黃曲霉毒素含量的測定 |
(Milk and milk products - Guidelines for a standardized description of competitive enzyme immunoassays - Determination of aflatoxin M1 content (ISO 14675:2003); German version EN ISO 14675:2003) |
| DIN EN ISO 14678-2005 |
膠粘劑.耐流動性的測定 |
|
| DIN EN ISO 14683-1999 |
建筑物中的熱橋.線性熱穿透系數.簡化方法和近似值 |
(Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values (ISO 14683:1999); German version EN ISO 14683:1999) |
| DIN EN ISO 14688-1-2003 |
土工調查和試驗.土壤的識別和分類.第1部分:識別和描述 |
(Geotechnical investigation and testing - Identification and classification of soil - Part 1: Identification and description (ISO 14688-1:2002); German version EN ISO 14688-1:2002) |
| DIN EN ISO 14688-2-2004 |
土工調查和試驗.土壤的識別和分類.第2部分:分類總則 |
|
| DIN EN ISO 14689-1-2004 |
土工調查和試驗.巖石的鑒定和分類.第1部分:鑒定和描述 |
|
| DIN EN ISO 14691-2002 |
石油和天然氣工業.機械動力傳輸?shù)娜嵝择詈?一般用途 |
(Petroleum and natural gas industries - Flexible couplings for mechanical power transmission - General purpose applications (ISO 14691:1999); German version EN ISO 14691:2000 (German and english text)) |
| DIN EN ISO 14692-1-2005 |
石油和天然氣工業.玻璃纖維增強塑料(GRP)管.第1部分:詞匯、符號、應用和材料 |
|
| DIN EN ISO 14692-1-2005 |
石油和天然氣工業.玻璃纖維增強塑料(GRP)管.第1部分:詞匯、符號、應用和材料 |
|
| DIN EN ISO 14692-2-2005 |
石油和天然氣工業.玻璃纖維增強塑料(GRP)管.第2部分:合格鑒定和制造 |
|
| DIN EN ISO 14692-2-2005 |
石油和天然氣工業.玻璃纖維增強塑料(GRP)管.第2部分:合格鑒定和制造 |
|
| DIN EN ISO 14692-3-2005 |
石油和天然氣工業.玻璃纖維增強塑料(GRP)管.第3部分:系統設計 |
|
| DIN EN ISO 14692-3-2005 |
石油和天然氣工業.玻璃纖維增強塑料(GRP)管.第3部分:系統設計 |
|
| DIN EN ISO 14692-4-2005 |
石油和天然氣工業.玻璃纖維增強塑料(GRP)管.第4部分:制造、安裝和操作 |
|
| DIN EN ISO 14692-4-2005 |
石油和天然氣工業.玻璃纖維增強塑料(GRP)管.第4部分:制造、安裝和操作 |
|
| DIN EN ISO 14693-2005 |
石油和天然氣工業.鉆井和油井輔助設備 |
|
| DIN EN ISO 14693-2005 |
石油和天然氣工業.鉆井和油井輔助設備 |
|
| DIN EN ISO 14698-1-2004 |
潔凈室和相關控制環境.生物污染控制.第1部分:總則和方法 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com