標準號 |
中文名稱 |
英文名稱 |
| ISO 9019-1995 |
證券.證書標準號 |
Securities - Numbering of certificates |
| ISO 902-1976 |
金屬鋁生產用氧化鋁.休止角的測定 |
Aluminium oxide primarily used for the production of aluminium; Measurement of the angle of repose |
| ISO 9020 Technical Corrigendum 1-1996 |
色漆和清漆用粘合劑.胺類樹脂的自由甲醛含量的測定.技術勘誤表1 |
Binders for paints and varnishes - Determination of free-formaldehyde content of amino resins - Sodium sulfite titrimetric method; Technical Corrigendum 1 |
| ISO 9020-1994 |
色漆和清漆用粘合劑.胺類樹脂的自由甲醛含量的測定 |
Binders for paints and varnishes; determination of free-formaldehyde content of amino resins; sodium sulfite titrimetric method |
| ISO 9021-1988 |
摩托車.操縱機構.型式.位置和功能 |
Motorcycles; Controls; Types, positions and functions |
| ISO 9022-1-1994 |
光學和光學儀器.環境試驗方法.第1部分:試驗的范圍及定義 |
Optics and optical instruments - Environmental test methods - Part 1: Definitions, extent of testing |
| ISO 9022-10-1998 |
光學和光學儀器.環境試驗方法.第10部分:復正弦波振動與干熱或干冷 |
Optics and optical instruments - Environmental test methods - Part 10: Combined sinusoidal vibration and dry heat or cold |
| ISO 9022-11-1994 |
光學和光學儀器.環境試驗方法.第11部分:霉菌生長 |
Optics and optical instruments - Environmental test methods - Part 11: Mould growth |
| ISO 9022-12-1994 |
光學和光學儀器.環境試驗方法.第12部分:污染 |
Optics and optical instruments - Environmental test methods - Part 12: Contamination |
| ISO 9022-13-1998 |
光學和光學儀器.環境試驗方法.第13部分:組合沖擊、碰撞或自由降落與干熱或干冷 |
Optics and optical instruments - Environmental test methods - Part 13: Combined shock, bump or free fall and dry heat or cold |
| ISO 9022-14-1994 |
光學和光學儀器.環境試驗方法.第14部分:露水、霜及冰 |
Optics and optical instruments - Environmental test methods - Part 14: Dew, hoarfrost, ice |
| ISO 9022-15-1998 |
光學和光學儀器.環境試驗方法.第15部分:復合數控寬頻隨機振動與干熱或干冷 |
Optics and optical instruments - Environmental test methods - Part 15: Combined digitally controlled broad-band random vibration and dry heat or cold |
| ISO 9022-16-1998 |
光學和光學儀器.環境試驗方法.第16部分:組合振動或穩定狀態的加速度與干熱或干冷 |
Optics and optical instruments - Environmental test methods - Part 16: Combined bounce or steady-state acceleration and dry heat or cold |
| ISO 9022-17-1994 |
光學和光學儀器.環境試驗方法.第17部分:太陽輻射混合污染 |
Optics and optical instruments - Environmental test methods - Part 17: Combined contamination, solar radiation |
| ISO 9022-18-1994 |
光學和光學儀器.環境試驗方法.第18部分:混合濕熱及低內壓力 |
Optics and optical instruments - Environmental test methods - Part 18: Combined damp heat and low internal pressure |
| ISO 9022-19-1994 |
光學和光學儀器.環境試驗方法.第19部分:與正弦波振動或隨機振動組合的溫度循環 |
Optics and optical instruments - Environmental test methods - Part 19: Temperature cycles combined with sinusoidal or random vibration |
| ISO 9022-2-2002 |
光學和光學儀器.環境試驗方法.第2部分:冷、熱和潮氣 |
Optics and optical instruments - Environmental test methods - Part 2: Cold, heat and humidity |
| ISO 9022-20-1997 |
光學和光學儀器.環境試驗方法.第20部分:含有硫化氫或二氧化硫的濕空氣 |
Optics and optical instruments - Environmental test methods - Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide |
| ISO 9022-21-1998 |
光學和光學儀器.環境試驗方法.第21部分:組合低壓和室溫或干熱 |
Optics and optical instruments - Environmental test methods - Part 21: Combined low pressure and ambient temperature or dry heat |
| ISO 9022-3-1998 |
光學和光學儀器.環境試驗方法.第3部分:機械應力 |
Optics and optical instruments - Environmental test methods - Part 3: Mechanical stress |
| ISO 9022-4-2002 |
光學和光學儀器.環境試驗方法.第4部分:鹽霧 |
Optics and optical instruments - Environmental test methods - Part 4: Salt mist |
| ISO 9022-5-1994 |
光學和光學儀器.環境試驗方法.第5部分:組合冷、低壓 |
Optics and optical instruments - Environmental test methods - Part 5: Combined cold, low air pressure |
| ISO 9022-6-1994 |
光學和光學儀器.環境試驗方法.第6部分:塵埃 |
Optics and optical instruments - Environmental test methods - Part 6: Dust |
| ISO 9022-7 Technical Corrigendum 1-2001 |
光學和光學儀器.環境試驗方法.第7部分:降雨.技術勘誤1 |
Optics and optical instruments - Environmental test method - Part 7: Drip, rain; Technical Corrigendum 1 |
| ISO 9022-7-1994 |
光學和光學儀器.環境試驗方法.第7部分:降雨 |
Optics and optical instruments - Environmental test methods - Part 7: Drip, rain |
| ISO 9022-8-1994 |
光學和光學儀器.環境試驗方法.第8部分:高壓、低壓及浸漬 |
Optics and optical instruments - Environmental test methods - Part 8: High pressure, low pressure, immersion |
| ISO 9022-9-1994 |
光學和光學儀器.環境試驗方法.第9部分:太陽輻射 |
Optics and optical instruments - Environmental test methods - Part 9: Solar radiation |
| ISO 9026-1991 |
粗橡膠或硫化化合物.生坯強度測定 |
Raw rubber of unvulcanized compounds; determination of green strength |
| ISO 9028-1989 |
橡膠.用酸煮法溶解 |
Rubber; dissolution by acid digestion |
| ISO 9029-1990 |
原油.水分測定.蒸餾法 |
Crude petroleum; determination of water; distillation method |
| ISO 903-1976 |
金屬鋁生產用氧化鋁.未夯實密度的測定 |
Aluminium oxide primarily used for the production of aluminium; Determination of untamped density |
| ISO 9030-1990 |
原油.水分和沉淀物測定.離心法 |
Crude petroleum; determination of water and sediment; centrifuge method |
| ISO 9031-1987 |
空中貨運設備.成組貨件(ULD S)的運輸系統.用圖形表示的符號 |
Air cargo equipment; Handling systems for unit load devices (ULDs); Symbols for pictorial representation |
| ISO 9033-1989 |
鋁礦石.散料含水量的測定 |
Aluminium ores; determination of the moisture content of bulk material |
| ISO 9034-1987 |
熱軋寬扁結構鋼.尺寸和形狀公差 |
Hot-rolled structural steel wide flats; Tolerances on dimensions and shape |
| ISO 9035-1989 |
鐵礦石.酸溶鐵含量的測定.滴定分析法 |
Iron ores; determination of acid-soluble iron(II) content; titrimetric method |
| ISO 9036-1987 |
信息處理.信息交換用的7位編碼阿拉伯字符集 |
Information processing; Arabic 7-bit coded character set for information interchange |
| ISO 9038-2002 |
液體持續可燃性的試驗 |
Test for sustained combustibility of liquids |
| ISO 9039 Technical Corrigendum 1-2004 |
光學和光學儀器.光學系統的質量評定.畸變的測定.技術勘誤1 |
|
| ISO 9039-1994 |
光學及光學儀器.光學系統的質量評定.撓曲測定 |
Optics and optical instruments - Quality evaluation of optical systems - Determination of distortion |
| ISO 904-1976 |
工業用鹽酸.總酸度的測定.滴定法 |
Hydrochloric acid for industrial use; Determination of total acidity; Titrimetric method |
| ISO 9042-1988 |
鋼.人工點計數,用點格統計評定組成的體積百分率 |
Steels; manual point counting method for statistically estimating the volume fraction of a constituent with a point grid |
| ISO 9043-1991 |
機動腳踏兩用車.慣性矩測量方法 |
Mopeds; measurement method for moments of inertia |
| ISO 9044-1999 |
工業用金屬絲織物.技術要求和試驗 |
Industrial woven wire cloth - Technical requirements and testing |
| ISO 9045-1990 |
工業用網篩和篩分.詞匯 |
Industrial screens and screening; vocabulary |
| ISO 9047-2001 |
房屋建筑.連接件.變溫下的密封膠粘合性能的測定 |
Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures |
| ISO 9048-1987 |
建筑結構.連接件.使用標準化儀器測定密封料可擠壓性 |
Building construction; Jointing products; Determination of extrudability of sealants using standardized apparatus |
| ISO 905-1976 |
工業用鹽酸.用測定鹽酸密度計算其濃度 |
Hydrochloric acid for industrial use; Evaluation of hydrochloric acid concentration by measurement of density |
| ISO 9050-1990 |
建筑用玻璃.玻璃透光性的測定.透陽光性.太陽能透過度以及紫外線透過度的測定和有關上光模 |
Glass in building; determination of light transmittance, solar direct transmittance, total solar energy transmittance and ultraviolet transmittance, and related glazing factors |
| ISO 9050-2003 |
建筑玻璃.光透率、日光直射率、太陽能總透射率及紫外線透射率及有關光澤系數的測定 |
(Glass in building - Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors) |
| ISO 9050-2003 |
建筑玻璃.光透率、日光直射率、太陽能總透射率及紫外線透射率及有關光澤系數的測定 |
|
| ISO 9051-2001 |
建筑用玻璃.建筑用裝了玻璃的組件包括耐火透明玻璃或者耐火半透明玻璃 |
Glass in building - Fire-resistant glazed assemblies containing transparent or translucent glass, for use in building |
| ISO 9052-1-1989 |
聲學.動力剛性的測定.第1部分:住房中用于浮置地板下的材料 |
Acoustics; determination of dynamic stiffness; part 1: materials used under floating floors in dwellings |
| ISO 9053-1991 |
聲學.聲學應用材料.空氣流動阻力的測定 |
Acoustics; materials for acoustical applications; determination of airflow resistance |
| ISO 9054-1990 |
泡沫塑料.自結皮高密度材料的試驗方法 |
Cellular plastics, rigid; test methods for self-skinned, high-density materials |
| ISO 9055-1988 |
煉鋁用碳素材料.電極瀝青.用氧彈法測定硫含量 |
Carbonaceous materials for the production of aluminium; pitch for electrodes; determination of sulfur content by the bomb method |
| ISO 9056-1990 |
玻璃容器.防偷竊精加工系列.尺寸 |
Glass containers; series of pilferproof finish; dimensions |
| ISO 9057-1991 |
玻璃容器.加壓液體用28mm瓶口.尺寸 |
Glass containers; 28 mm tamper-evident finish for pressurized liquids; dimensions |
| ISO 9058-1992 |
玻璃容器.公差 |
Glass containers; tolerances |
| ISO 9059-1990 |
太陽能.與基準太陽熱量計比對野外太陽熱量計 |
Solar energy; calibration of field pyrheliometers by comparison to a reference pyrheliometer |
| ISO 906-1976 |
工業用鹽酸.硫酸鹽含量的測定.硫酸鋇重量法 |
Hydrochloric acid for industrial use; Determination of sulphate content; Barium sulphate gravimetric method |
| ISO 9060-1990 |
太陽能.對半球面太陽能輻射和太陽直接輻射測量?jī)x的分類和規范 |
Solar energy; specification and classification of instruments for measuring hemispherical solar and direct solar radiation |
| ISO 9061-1993 |
酸級和陶瓷級氟石.鐵含量的測定.1,10菲繞啉光譜法 |
Acid-grade and ceramic-grade fluorspar; determination of iron content; 1,10-phenanthroline spectrometric method |
| ISO 9062-1992 |
酸級和陶瓷級氟石.錳含量測定.高碘酸鹽光譜分析法 |
Acid-grade and ceramic-grade fluorspar; determination of manganese content; periodate spectrometric method |
| ISO 9069-1988 |
信息處理.SGML支援設備.SGML文獻交換格式(SDIF) |
Information processing; SGML support facilities; SGML document interchange format (SDIF) |
| ISO 907-1976 |
工業用鹽酸.硫酸鹽灰分的測定.重量法 |
Hydrochloric acid for industrial use; Determination of sulphated ash; Gravimetric method |
| ISO 9073-1-1989 |
紡織品.非織造品的試驗方法.第1部分:單位面積質量的測定 |
Textiles; test methods for nonwovens; part 1: determination of mass per unit area |
| ISO 9073-10-2003 |
紡織品.非織造布的試驗方法.第10部分:干燥狀態下纖維戎和其它粒子生成物 |
(Textiles - Test methods for nonwovens - Part 10: Lint and other particles generation in the dry state) |
| ISO 9073-10-2003 |
紡織品.非織造布的試驗方法.第10部分:干燥狀態下纖維戎和其它粒子生成物 |
|
| ISO 9073-10-2003 |
紡織品.非織造布的試驗方法.第10部分:干燥狀態下纖維戎和其它粒子生成物 |
|
| ISO 9073-11-2002 |
紡織品.非織造品的試驗方法.第11部分:徑流量 |
Textiles - Test methods for nonwovens - Part 11: Run-off |
| ISO 9073-12-2002 |
紡織品.非織造品的試驗方法.第12部分:吸收需求量 |
Textiles - Test methods for nonwovens - Part 12: Demand absorbency |
| ISO 9073-2 Technical Corrigendum 1-1998 |
紡織品.無紡織品的試驗方法.第2部分:厚度的測定.技術勘誤1 |
Textiles - Test methods for nonwovens - Part 2: Determination of thickness; Technical Corrigendum 1 |
| ISO 9073-2-1995 |
紡織品.非織造品的試驗方法.第2部分:厚度的測定 |
Textiles - Test methods for nonwovens - Part 2: Determination of thickness |
| ISO 9073-3-1989 |
紡織品.非織造品的試驗方法.第3部分:抗張強度和伸張度的測定 |
Textiles; test methods for nonwovens; part 3: determination of tensile strength and elongation |
| ISO 9073-4-1997 |
紡織品.非織造品的檢驗方法.第4部分:抗撕裂的測定 |
Textiles - Test methods for nonwovens - Part 4: Determination of tear resistance |
| ISO 9073-6-2000 |
紡織品.非織造品的試驗方法.第6部分:吸收性 |
Textiles - Test methods for nonwovens - Part 6: Absorption |
| ISO 9073-6-2000 |
紡織品.非織造品的試驗方法.第6部分:吸收性 |
Textiles - Test methods for nonwovens - Part 6: Absorption |
| ISO 9073-7-1995 |
紡織品.非織造品的試驗方法.第7部分:抗彎強度的測定 |
Textiles - Test methods for nonwovens - Part 7: Determination of bending length |
| ISO 9073-8-1995 |
紡織品.非織造品的試驗方法.第8部分:液體滲透時間的測定(模擬尿) |
Textiles - Test methods for nonwovens - Part 8: Determination of liquid strike-through time (simulated urine) |
| ISO 9073-9-1995 |
紡織品.非織造品的試驗方法.第9部分:懸垂系數的測定 |
Textiles - Test methods for nonwovens - Part 9: Determination of drape coefficient |
| ISO 908-1980 |
工業用鹽酸.氧化或還原物質含量的測定.滴定法 |
Hydrochloric acid for industrial use; Determination of oxidizing or reducing substances content; Titrimetric method |
| ISO 9080-2003 |
塑料管道和導管系統.用外推法測定熱塑性塑料管材的長期靜液壓強度 |
(Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation) |
| ISO 9080-2003 |
塑料管道和導管系統.用外推法測定熱塑性塑料管材的長期靜液壓強度 |
|
| ISO 9083-2001 |
正齒輪和斜齒輪的負載能力的計算.船用齒輪的應用 |
Calculation of load capacity of spur and helical gears - Application to marine gears |
| ISO 9084-2000 |
正齒輪和斜齒輪承載能力計算.快速齒輪和類似要求齒輪的應用 |
Calculation of load capacity of spur and helical gears - Application to high speed gears and gears of similar requirements |
| ISO 9085-2002 |
正齒輪和斜齒輪的荷載能力計算.工業齒輪應用 |
Calculation of load capacity of spur and helical gears - Application for industrial gears |
| ISO 9086-1-1987 |
木材.物理和機械試驗方法.詞匯.第1部分:一般概念和宏觀組織.三種語言版 |
Wood; Methods of physical and mechanical testing; Vocabulary; Part 1 : General concepts and macrostructure Trilingual edition |
| ISO 9087-1998 |
木材.軸向負荷下釘子和螺釘固著力的測定 |
Wood - Determination of nail and screw holding power under axial load application |
| ISO 9088-1997 |
鋁生產用碳素材料.預烙陽極的陰極塊.用比重法對二甲苯密度的測定 |
Carbonaceous materials used for the production of aluminium - Cathode blocks an prebacked anodes - Determination of the density in xylene by a pyknometric method |
| ISO 9089-1989 |
海上建筑物.移動式近海設備.錨用絞車 |
Marine structures; mobile offshore units; anchor winches |
| ISO 9090-1989 |
氣焊以及類似的處理過程中設備的氣密特性 |
Gas tightness of equipment for gas welding and allied processes |
| ISO 9091-1-1991 |
輕質碳?xì)浠衔镏评湟?船上球型容器的校準.第1部分:立體攝影測繪 |
Refrigerated light-hydrocarbon fluids; calibration of spherical tanks in ships; part 1: stereo-photogrammetry |
| ISO 9091-2-1992 |
輕質碳?xì)浠衔镏评湟?船上球型容器的校準.第2部分:三角測量 |
Refrigerated light hydrocarbon fluids; calibration of spherical tanks in ships; part 2: triangulation measurement |
| ISO 9092-1988 |
紡織品.非織造品.定義 |
Textiles; nonwovens; definition |
| ISO 9093-1-1994 |
小船.船底閥和整個船配件.第1部分:金屬的 |
Small craft - Seacocks and through-hull fittings - Part 1: Metallic |
| ISO 9093-2-2002 |
小艇.通海旋塞及貫穿艇體配件.第1部分:非金屬的 |
Small craft - Seacocks and through-hull fittings - Part 2: Non-metallic |
| ISO 9094-1-2003 |
小艇.防火.第2部分:艇體長最高達15m的小艇 |
Small craft - Fire protection - Part 1: Craft with a hull length of up to and including 15 m |
| ISO 9094-1-2003 |
小艇.防火.第2部分:艇體長最高達15m的小艇 |
|
| ISO 9094-2-2002 |
小艇.防火.第2部分:艇體長超過15m的小艇 |
Small craft - Fire protection - Part 2: Craft with a hull length of over 15 m |
| ISO 9095-1990 |
鋼管.鑒別材料用連續符號標志和顏色碼 |
Steel tubes; continuous character marking and colour coding for material identification |
| ISO 9096-2003 |
固定源排放.顆粒物質量濃度的手動測定 |
Stationary source emissions - Manual determination of mass concentration of particulate matter |
| ISO 9096-2003 |
固定源排放.顆粒物質量濃度的手動測定 |
|
| ISO 9097-1991 |
小型船舶.電扇 |
Small craft; electric fans |
| ISO 9098-1-1994 |
家用雙層床的安全要求和試驗.第1部分:安全要求 |
Bunk beds for domestic use - Safety requirements and tests - Part 1: Safety requirements |
| ISO 9098-2-1994 |
家用雙層床的安全要求和試驗.第2部分:試驗方法 |
Bunk beds for domestic use - Safety requirements and tests - Part 2: Test methods |
| ISO 9099-1987 |
船舶干燥的儲備室的空氣調節和通風.設計條件和計算基礎 |
Air-conditioning and ventilation of dry provision rooms on board ships; Design conditions and basis of calculations |
| ISO 91-1-1992 |
石油測量數值表.第1部分:根據參比溫度15℃和60°F編制的表 |
Petroleum measurement tables; part 1: tables based on reference temperatures of 15 C and 60 F |
| ISO 91-2-1991 |
石油測量數值表.第2部分:根據參比溫度20℃編制的表 |
Petroleum measurement tables; part 2: tables based on a reference temperature of 20 C |
| ISO 910-1977 |
工業用硫酸和發煙硫酸.總酸度的測定以及發煙硫酸中游離三氧化硫含量的計算.滴定法 |
Sulphuric acid and oleum for industrial use; Determination of total acidity, and calculation of free sulphur trioxide content of oleum; Titrimetric method |
| ISO 9100-1992 |
廣口玻璃容器.真空凸緣瓶口.尺寸 |
Wide-mouth glass containers; vacuum lug finishes; dimensions |
| ISO 9101-1987 |
表面活性劑.界面張力的測定.滴體積法 |
Surface active agents; Determination of interfacial tension; Drop volume method |
| ISO 9102-1997 |
柴油發動機.內螺紋噴嘴架,24,25,26,和26.1型 |
Diesel engines - Screw-in injection nozzle holders, types 24, 25, 26 and 26.1 |
| ISO 9103-1987 |
道路車輛.壓燃式發動機.23型螺旋擰入式注油嘴 |
Road vehicles; Compression-ignition engines; Screw-in injection nozzle holder, type 23 |
| ISO 9104-1991 |
封閉管道中液體流量的測量.液體的電磁流量計特性評定法 |
Measurement of fluid flow on closed conduits; methods of evaluating the performance of electromagnetic flow-meters for liquids |
| ISO 911-1977 |
工業用硫酸.用硫酸密度計算其濃度 |
Sulphuric acid for industrial use; Evaluation of sulphuric acid concentration by measurement of density |
| ISO 9110-1-1990 |
液壓傳動.測量技術.第1部分:通用測量原理 |
Hydraulic fluid power; measurement techniques; part 1: general measurement principles |
| ISO 9110-2-1990 |
液壓傳動.測量技術.第2部分:在封閉式管道中對平均穩定壓力的測量 |
Hydraulic fluid power; measurement techniques; part 2: measurement of average steady-state pressure in a closed conduit |
| ISO 9112-1991 |
卡車和公共汽車輪胎.輪胎滾動周長的測量方法.承載新輪胎 |
Truck and bus tyres; method of measuring tyre rolling circumference; loaded new tyres |
| ISO 9113-1986 |
塑料.聚丙烯(PP)和丙烯共聚物熱塑塑料.全同指數的測定 |
Plastics; Polypropylene (PP) and propylene-copolymer thermoplastics; Determination of isotactic index |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com