標準號 |
中文名稱 |
英文名稱 |
| BS EN ISO 9908-1994 |
離心泵技術規范.III類 |
(Technical specifications for centrifugal pumps - Class III) |
| BS EN ISO 9913-1-1997 |
光學和光學儀器.隱形鏡片.第1部分:用FATT法對氧氣滲透性和可透性的測定 |
(Optics and optical instruments - Contact lenses - Determination of oxygen permeability and transmissibility by the FATT method) |
| BS EN ISO 9913-2-2000 |
光學和光學儀器.接觸鏡片.用庫侖法測定氧滲透性和傳輸性 |
(Optics and optical instruments - Contact lenses - Determination of oxygen permeability and transmissibility by the coulometric method) |
| BS EN ISO 9914-1997 |
光學及光學儀器.接觸鏡片.接觸鏡片材料折射指數的測定 |
(Optics and optical instruments - Contact lenses - Determination of refractive index of contact lens materials) |
| BS EN ISO 9917-1-2003 |
牙科用水基粘結劑.粉末/液態酸基粘結劑 |
(Dental water-based cements - Powder/liquid acid-base cements) |
| BS EN ISO 9917-2-2000 |
牙科用水基粘結劑.光敏粘結劑 |
(Dental water-based cements - Light-activated cements) |
| BS EN ISO 9919-2005 |
醫用電氣設備.醫用脈動式血氧計的基本安全和性能的特殊要求 |
|
| BS EN ISO 9921-2003 |
人類工效學.語音通訊的評估 |
(Ergonomics - Assessment of speech communication) |
| BS EN ISO 9934-1-2001 |
無損檢驗.磁粉檢驗.一般原理 |
(Non-destructive testing - Magnetic particle testing - General principles) |
| BS EN ISO 9934-2-2002 |
無損檢驗.磁粉檢驗.碳傷媒介 |
(Non-destructive testing - Magnetic particle testing - Detection media) |
| BS EN ISO 9934-3-2002 |
無損檢驗.磁粉檢驗.設備 |
(Non-destructive testing - Magnetic particle testing - Equipment) |
| BS EN ISO 9944-1995 |
塑料.酚醛樹脂.樹脂萃取物電導率的測定 |
(Plastics - Phenolic resins - Determination of electrical conductivity of resin extracts) |
| BS EN ISO 9946-1999 |
工業操縱機器人.特性表示方法 |
(Manipulating industrial robots - Presentation of characteristics) |
| BS EN ISO 9956-10-1997 |
金屬材料焊接程序的批準和規范.電子束焊接程序規范 |
(Specification and approval of welding procedures for metallic materials - Welding procedure specification for electron beam welding) |
| BS EN ISO 9956-11-1997 |
金屬材料焊接程序的批準和規范.激光束焊接程序規范 |
(Specification and approval of welding procedures for metallic materials - Welding procedure specification for laser beam welding) |
| BS EN ISO 9963-1-1996 |
水質.強堿性的測定.第1部分:總強堿性和混合強堿性的測定 |
(Water quality - Determination of alkalinity - Determination of total and composite alkalinity) |
| BS EN ISO 9963-2-1996 |
水質.強堿性的測定.第2部分:碳酸鹽的強堿性的測定 |
(Water quality - Determination of alkalinity - Determination of carbonate alkalinity) |
| BS EN ISO 9967-1995 |
熱塑性塑料管.蠕變比的測定 |
(Thermoplastics pipes - Determination of creep ratio) |
| BS EN ISO 9969-1995 |
熱塑塑料管.環硬挺度的測定 |
(Thermoplastics pipes - Determination of ring stiffness) |
| BS EN ISO 9974-1-2000 |
普通和液力用連接器.用ISO 261螺紋的彈性或金屬與金屬間密封的氣門和雙頭螺栓端頭.螺紋氣門 |
(Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Threaded ports) |
| BS EN ISO 9974-2-2000 |
普通和液力用連接器.用ISO 261螺紋的彈性或金屬與金屬間密封的氣門和雙頭螺栓端頭.(E型)彈性密封的雙頭螺栓 |
(Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Stud ends with elastomeric sealing (type E)) |
| BS EN ISO 9974-3-2000 |
普通和液力用連接器.用ISO 261螺紋的彈性或金屬與金屬間密封的氣門和雙頭螺栓端頭.(B型)金屬與金屬間密封的 |
(Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Stud ends with metal-to-metal sealing (type B)) |
| BS EN ISO 9994-2002 |
打火機的安全規范 |
(Lighters - Safety specification) |
| BS EN ISO 9997-2000 |
帶麻醉劑管的牙科用注射器 |
(Dental cartridge syringes) |
| BS EN ISO 9999-2002 |
殘疾人專用輔助器具.分類和術語 |
(Technical aids for persons with disabilities - Classification and terminology) |
| BS EN ISO/IEC 11172-1-1993 |
信息技術.1.5Mbit/s以內數字存儲介質用移動圖形和相關音頻的編碼.系統 |
(Information technology - Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s - Systems) |
| BS EN ISO/IEC 11172-2-1993 |
信息技術.1.5Mbit/s以內數字存儲介質用移動圖像和相關音頻的編碼.視頻 |
(Information technology - Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s - Video) |
| BS EN ISO/IEC 11172-3-1993 |
信息技術.1.5Mbit/s以內數字存儲介質用移動圖像和相關音頻的編碼.音頻 |
(Information technology - Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s - Audio) |
| BS EN ISO/IEC 11172-4-1995 |
信息技術.1.5Mbit/s以內數字存儲介質用移動圖像和相關音頻的編碼.第4部分:性能審核試驗 |
(Information technology - Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s - Compliance testing) |
| BS EN ISO/IEC 11544-1994 |
信息技術.圖像和音頻信息的代碼表示.先進的雙級圖像壓縮 |
(Information technology - Coded representation of picture and audio information - Progressive bi-level image compression) |
| BS EN ISO/IEC 13818-1-1997 |
信息技術.移動圖像和相關音頻信息的編碼.系統 |
(Information technology - Generic coding of moving pictures and associated audio information - Systems) |
| BS EN ISO/IEC 13818-3-1995 |
信息技術.移動圖像和相關音頻的編碼.音頻 |
(Information technology - Generic coding of moving pictures and associated audio information - Audio) |
| BS EN ISO/IEC 13818-9-2001 |
信息技術.移動畫面和有關音頻信息的一般編碼.第9部分:系統譯碼器實時接口的擴展 |
(Information technology - Generic coding of moving pictures and associated audio information - Extension for real time interface for systems decoders) |
| BS EN ISO/IEC 15416-2002 |
信息技術.自動識別和數據獲取技術.條形碼印制質量檢驗規范.線性符號 |
(Information technology - Automatic identification and data capture techniques - Bar code print quality test specification - Linear symbols) |
| BS EN ISO/IEC 15419-2002 |
信息技術.自動識別和數據采集技術.條形碼數字成像和印制性能試驗 |
(Information technology - Automatic identification and data capture techniques - Bar code digital imaging and printing performance testing) |
| BS EN ISO/IEC 15421-2002 |
信息技術.自動識別和數據獲取技術.條形碼總試驗規范 |
(Information technology - Automatic identification and data capture techniques - Bar code master test specifications) |
| BS EN ISO/IEC 17000-2004 |
合格評定.詞匯和一般原則 |
|
| BS EN ISO/IEC 17011-2004 |
合格評定.認證機構認證合格評定機構的一般要求 |
|
| BS EN ISO/IEC 17011-2004 |
合格評定.認證機構認證合格評定機構的一般要求 |
|
| BS EN ISO/IEC 17020-2004 |
各種檢查機構運作的一般規則 |
|
| BS EN ISO/IEC 17020-2004 |
各種檢查機構運作的一般規則 |
|
| BS EN ISO/IEC 17024-2003 |
合格評定.人員認證機構的一般要求 |
(Conformity Assessment - General requirements for bodies operating certification of persons) |
| BS EN ISO/IEC 17025-2000 |
試驗和校準實驗室能力的一般要求 |
(General requirements for the competence of testing and calibration laboratories) |
| BS EN ISO/IEC 17040-2005 |
合格評定.合格評定機構和認可機構同等評定的一般要求 |
|
| BS EN ISO/IEC 17050-1-2004 |
合格評定.供貨商的合格聲明.一般要求 |
|
| BS EN ISO/IEC 17050-2-2004 |
合格評定.供貨商的合格聲明.支持文獻 |
|
| BS EN ISO/IEC 7487-1-1995 |
信息技術.以限定的頻率7958次磁通變換/弧度和1.9次變換/mm(48次變換/in)在兩側調制錄制的130mm(5.25in)盒式 |
(Information technology - Data interchange on 130mm (5,25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 1,9 tpmm (48 tpi), on both sides - ISO type 202 - D) |
| BS EN ISO/IEC 7498-1-1995 |
信息技術.開放系統互連.基本參考模式:基本模式 |
(Information technology. Open systems interconnection. Basic reference model. The basic model) |
| BS EN ISO/IEC 7810-1996 |
識別卡.物理特性 |
(Identification cards - Physical characteristics) |
| BS EN ISO/IEC 7811-1-1996 |
識別卡.錄制技術.第1部分:壓印 |
(Identification cards - Recording technique - Embossing) |
| BS EN ISO/IEC 7811-2-1996 |
識別卡.錄制技術.第2部分:磁帶 |
Identification cards - Recording technique - Magnetic stripe |
| BS EN ISO/IEC 7811-3-1996 |
識別卡.錄制技術.第3部分:ID-1卡片壓印字符的位置 |
(Identification cards - Recording technique - Location of embossed characters on ID-1 cards) |
| BS EN ISO/IEC 7811-4-1996 |
識別卡.錄制技術.第4部分:只讀磁道的位置.單列磁道和雙列磁道 |
(Identification cards - Recording technique - Location of read-only magnetic tracks - Tracks 1 and 2) |
| BS EN ISO/IEC 7811-5-1996 |
識別卡.錄制技術.第5部分:讀寫磁道位置.三列磁道 |
(Identification cards - Recording technique - Location of read-write magnetic track - Track 3) |
| BS EN ISO/IEC 8072-1999 |
信息技術.開放系統互連.傳輸服務定義 |
(Information technology. Open systems interconnection. Transport service definition) |
| BS EN ISO/IEC 9646-1-1996 |
信息技術.開放系統互連.合格測試的方法和結構.通用概念 |
(Information technology. Open systems interconnection. Conformance testing methodology and framework. General concepts) |
| BS EN ISO/IEC 9646-2-1996 |
信息技術.開放系統互連.合格測試的方法和結構.抽象試驗規范 |
(Information technology. Open systems interconnection. Conformance testing methodology and framework. Abstract Test Suite specification) |
| BS EN ISO/IEC 9646-4-1996 |
信息技術.開放系統互連.合格試驗方法學和框架.第4部分:試驗 |
(Information technology. Open systems interconnection. Conformance testing methodology and framework. Test realization) |
| BS EN ISO/IEC 9646-5-1996 |
信息技術.開放系統互連.合格試驗方法學和框架.第5部分:合格評定過程用試驗室和試驗委托人的要求 |
(Information technology. Open systems interconnection. Conformance testing methodology and framework. Requirements on test laboratories and clients for the conformance assessment process) |
| BS EN ISO/IEC 9646-6-1996 |
信息技術.開放系統互連.合格測試的方法和結構.外形測試協議規范 |
(Information technology. Open systems interconnection. Conformance testing methodology and framework. Protocol profile test specification) |
| BS EN ISO/IEC 9661-1997 |
信息技術.12.7mm寬盒式磁帶上的數據交換.18道、每毫米1491數據字節 |
(Information technology - Data interchange on 12,7 mm wide magnetic tape cartridges - 18 tracks, 1 491 data bytes per millimetre) |
| BS EN ISO/TR 11688-2-2001 |
聲學.低噪聲機械和設備的設計推薦規程.低噪聲設計的物理學說明 |
(Acoustics - Recommended practice for the design of low-noise machinery and equipment - Introduction to the physics of low-noise design) |
| BS ISO 1000-2004 |
SI單位及其倍數單位和一些其他單位應用的建議 |
|
| BS ISO 10002-2004 |
質量管理.用戶滿意度.機構中投訴處理指南 |
|
| BS ISO 10002-2004 |
質量管理.用戶滿意度.機構中投訴處理指南 |
|
| BS ISO 10005-1996 |
質量管理.質量計劃導則 |
Quality management - Guidelines for quality plans |
| BS ISO 10005-2005 |
質量管理體系.質量計劃指南 |
|
| BS ISO 10006-1998 |
質量管理.項目質量管理指南 |
Quality management - Guidelines to quality in project management |
| BS ISO 10006-2003 |
質量管理體系.項目的質量管理導則 |
(Quality management systems - Guidelines for quality management in projects) |
| BS ISO 10007-2003 |
質量管理體系.技術狀態管理指南 |
(Quality management systems - Guidelines for configuration management) |
| BS ISO 10012-2-1997 |
測量設備的質量保證.測量過程控制導則 |
Quality assurance for measuring equipment - Guidelines for control of measurement processes |
| BS ISO 10015-2000 |
質量管理.培訓導則 |
Quality management - Guidelines for training |
| BS ISO 10019-2005 |
質量管理體系顧問的選擇和享受其所提供服務的導則 |
|
| BS ISO 10044-1997 |
銀行和有關的財務服務設施.信息交流.押匯信用證形式 |
Banking and related financial services. Information interchange. Documentary credit form |
| BS ISO 10045-1993 |
高山雪橇.緊固安裝部位.試驗螺釘?shù)囊?/td>
| Alpine skis - Binding mounting area - Requirements for test screws |
| BS ISO 10054-1998 |
內燃壓燃式發動機.穩定狀態下發動機運轉產生煙霧的測量儀器.過濾型煙霧計 |
Internal combustion compression-ignition engines - Measurement apparatus for smoke from engines operating under steady-state conditions - Filter type smokemeter |
| BS ISO 10056-2001 |
機械振動.鐵路車輛里乘客和乘務員全身振動的測量和分析 |
Mechanical vibration - Measurement and analysis of whole-body vibration to which passengers and crew are exposed in railway vehicles |
| BS ISO 10059-2-2004 |
致密、定型耐火制品.冷壓強度測定.有熱片試驗 |
|
| BS ISO 1007-2000 |
攝影技術.135號膠卷暗盒.規范 |
Photography - 135-size film and magazine - Specifications |
| BS ISO 10071-1-2001 |
壓印工具.球鎖式?jīng)_壓.輕載的球鎖式?jīng)_壓 |
Tools for pressing - Ball-lock punches - Ball-lock punches for light duty |
| BS ISO 10071-2-2005 |
沖壓工具.球形鎖緊沖床.用于重載荷的球形鎖緊沖床 |
|
| BS ISO 10072-2004 |
模鑄工具.澆口套.尺寸 |
|
| BS ISO 1008-1995 |
攝影技術.相紙尺寸.單張相紙 |
Photography - Paper dimensions - Pictorial sheets |
| BS ISO 10081-1-2003 |
致密定型耐火制品的分類.硅酸鋁 |
(Classification of dense shaped refractory products - Alumina-silica) |
| BS ISO 10081-2-2003 |
致密定型耐火制品的分類.含殘留碳小于7%的堿性制品 |
(Classification of dense shaped refractory products - Basic products containing less than 7 % residual carbon) |
| BS ISO 10081-3-2003 |
致密定型耐火制品的分類.含殘留碳7%-50%的堿性制品 |
(Classification of dense shaped refractory products - Basic products containing from 7 % to 50 % residual carbon) |
| BS ISO 10086-2-2004 |
煤.選煤用絮凝劑評價方法.旋轉真空過濾設備中作為助濾劑的絮凝劑 |
|
| BS ISO 10086-2-2004 |
煤.選煤用絮凝劑評價方法.旋轉真空過濾設備中作為助濾劑的絮凝劑 |
|
| BS ISO 1009-2001 |
攝影技術.相紙尺寸.印相機用卷紙 |
Photography - Paper dimensions - Rolls for printers |
| BS ISO 10099-2001 |
氣壓液動.氣液缸.最終檢驗和驗收標準 |
Pneumatic fluid power - Cylinders - Final examination and acceptance criteria |
| BS ISO 10100-2001 |
液壓傳動.液壓缸.驗收試驗 |
Hydraulic fluid power - Cylinders - Acceptance tests |
| BS ISO 10102-2001 |
螺釘和螺母用裝配工具.工程用雙頭開口扳手.扳手長度和端口厚度 |
Assembly tools for screws and nuts - Double-headed open-ended engineers` wrenches - Length of wrenches and thickness of the heads |
| BS ISO 10103-2001 |
螺釘和螺母用裝配工具.雙頭平直和彎頭套筒扳手.扳手長度和端口厚度 |
Assembly tools for screws and nuts - Double-headed, flat and offset, box wrenches - Length of wrenches and thickness of the heads |
| BS ISO 10104-2001 |
螺釘和螺母用裝配工具.雙頭高彎頭和改進的彎頭套筒扳手.扳手長度和端口厚度 |
Assembly tools for screws and nuts - Double-headed, deep offset and modified offset, box wrenches - Length of wrenches and thickness of the heads |
| BS ISO 10109-1-1995 |
光學和光學儀表.環境要求.通用信息,定義,氣候帶及其參數 |
Optics and optical instruments - Environmental requirements - General information, definitions, climatic zones and their parameters |
| BS ISO 10109-11-2001 |
光學和光學儀器.環境要求.戶外條件下使用的光學儀器 |
Optics and optical instruments - Environmental requirements - Optical instruments for outdoor conditions of use |
| BS ISO 10109-12-2004 |
光學和光學儀器.環境要求.光學儀器的運輸條件 |
|
| BS ISO 10109-4-2001 |
光學和光學儀器.環境要求.望遠鏡系統的試驗要求 |
Optics and optical instruments - Environmental requirements - Test requirements for telescopic systems |
| BS ISO 10109-6-1995 |
光學和光學儀表.環境要求.醫用光學裝置的試驗要求 |
Optics and optical instruments - Environmental requirements - Test requirements for medical optical devices |
| BS ISO 10109-7-2002 |
光學和光學儀器的環境要求.光學測量儀器的試驗要求 |
Optics and optical instruments - Environmental requirements - Test requirements for optical measuring instruments |
| BS ISO 10109-8-1995 |
光學和光學儀表.環境要求.使用極端條件的試驗要求 |
Optics and optical instruments - Environmental requirements - Test requirements for extreme conditions of use |
| BS ISO 10110-1-1996 |
光學及光學儀器.光學件和系統圖形的制備.第1部分:總則 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - General |
| BS ISO 10110-10-1996 |
光學及光學儀器.光學件和系統圖形的制備.第10部分:表示數據表 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Table representing data of a lens element |
| BS ISO 10110-11-1996 |
光學及光學儀器.光學件和系統圖形的制備.第11部分:不容許數據 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Non-toleranced data |
| BS ISO 10110-12-1997 |
光學及光學儀器.光學件和系統圖形的制備.第12部分:非球面形表面 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Aspheric surfaces |
| BS ISO 10110-13-1998 |
光學和光學儀器.光學件和系統圖形的制備.第13部分:激光輻射損壞閾 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Laser irradiation damage threshold |
| BS ISO 10110-14-2003 |
光學和光學儀器.光學件和系統制圖準備.波前變形公差 |
(Optics and optical instruments - Preparation of drawings for optical elements and systems - Wavefront deformation tolerance) |
| BS ISO 10110-17-2004 |
光學和光學儀器.光學件和系統制圖準備.激光輻射損害閾 |
|
| BS ISO 10110-2-1996 |
光學及光學儀器.光學件和系統圖形的制備.第2部分:材料不完全性.應力雙折射 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Material imperfections - Stress birefringence |
| BS ISO 10110-3-1996 |
光學及光學儀器.光學件和系統圖形的制備.第3部分:材料不完全性.氣泡和雜質 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Material imperfections - Bubbles and inclusions |
| BS ISO 10110-4-1997 |
光學及光學儀器.光學件和系統圖形的制備.第4部分:不完備材料的不均勻性和擦痕 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Material imperfections - Inhomogeneity and striae |
| BS ISO 10110-5-1996 |
光學及光學儀器.光學件和系統圖形的制備.第5部分:表面形狀公差 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Surface form tolerances |
| BS ISO 10110-6-1996 |
光學及光學儀器.光學件和系統圖形的制備.第6部分:定中心公差 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Centring tolerances |
| BS ISO 10110-7-1996 |
光學及光學儀器.光學件和系統圖形的制備.第7部分:表面缺陷公差 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Surface imperfection tolerances |
| BS ISO 10110-8-1998 |
光學及光學儀器.光學件和系統圖形的制備.表面紋理 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Surface texture |
| BS ISO 10110-9-1996 |
光學及光學儀器.光學件和系統圖形的制備.第9部分:表面處理和涂層 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Surface treatment and coating |
| BS ISO 10119-2002 |
碳纖維.測定密度 |
Carbon fibre - Determination of density |
| BS ISO 1012-1999 |
攝影技術.普通軟片和膠卷.尺寸 |
Photography - Films in sheets and rolls for general use - Dimensions |
| BS ISO 10126-1-1992 |
銀行業務.電文加密(大批)程序.第1部分:一般原則 |
Banking - Procedures for message encipherment (wholesale) - General principles |
| BS ISO 10126-2-1992 |
銀行業務.第2部分:信息編碼程序(大規模).DEA算法 |
Banking - Procedures for message encipherment (wholesale) - DEA algorithm |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com