標準號 |
中文名稱 |
英文名稱 |
| ISO 8361-1-1991 |
熱塑塑料管和配件.吸水.第1部分:一般試驗方法 |
Thermoplastics pipes and fittings; water absorption; part 1: general test method |
| ISO 8361-2-1991 |
熱塑塑料管和配件.吸水.第2部分:未增塑聚(氯乙烯)(PVC-U)管和配件 |
Thermoplastics pipes and fittings; water absorption; part 2: test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings |
| ISO 8361-3-1991 |
熱塑塑料管和配件.吸水.第3部分:丙烯睛J(ABS)管和配件 |
Thermoplastics pipes and fittings; water absorption; part 3: test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings |
| ISO 8362-1-1989 |
注射容器及附件.第1部分:用玻璃管制成的注射劑小瓶 |
Injection containers for injectables and accessories; part 1: injection vials made of glass tubing |
| ISO 8362-1-2003 |
注射容器及附件.第1部分:管制玻璃注射瓶 |
(Injection containers and accessories - Part 1: Injection vials made of glass tubing) |
| ISO 8362-1-2003 |
注射容器及附件.第1部分:管制玻璃注射瓶 |
|
| ISO 8362-2-1988 |
注射容器及附件.第2部分:注射瓶的封口 |
Injection containers for injectables and accessories; part 2: closures for injection vials |
| ISO 8362-3-2001 |
注射容器及附件.第3部分:注射小瓶用的鋁蓋 |
Injection containers and accessories - Part 3: Aluminium caps for injection vials |
| ISO 8362-3-2001 |
注射容器及附件.第3部分:注射小瓶用的鋁蓋 |
Injection containers and accessories - Part 3: Aluminium caps for injection vials |
| ISO 8362-4-1989 |
注射容器及附件.第4部分:由模壓玻璃制成的盛注射劑的小瓶 |
Injection containers for injectables and accessories; part 4: injection vials made of moulded glass |
| ISO 8362-4-2003 |
注射容器及附件.第4部分:模制玻璃注射瓶 |
(Injection containers and accessories - Part 4: Injection vials made of moulded glass) |
| ISO 8362-4-2003 |
注射容器及附件.第4部分:模制玻璃注射瓶 |
|
| ISO 8362-4-2003 |
注射容器及附件.第4部分:模制玻璃注射瓶 |
|
| ISO 8362-4-2003 |
注射容器及附件.第4部分:模制玻璃注射瓶 |
|
| ISO 8362-5-1995 |
注射容器及附件.第2部分:注射劑小瓶用冷動干燥塞子 |
Injection containers for injectables and accessories - Part 5: Freeze drying closures for injection vials |
| ISO 8362-6-1992 |
注射容器及附件.第6部分:注射小瓶用鋁和塑料復合物制帽蓋 |
Injection containers for injectables and accessories; part 6: caps made of aluminium-plastics combinations for injection vials |
| ISO 8362-7-1995 |
注射容器及附件.第7部分:無重疊塑料部件的由鋁和塑料復合物制的注射小瓶帽蓋 |
Injection containers for injectables and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part |
| ISO 8364-1999 |
高山雪橇和滑雪板裝配.捆綁安裝區域.要求和試驗方法 |
Alpine skis and bindings - Binding mounting area - Requirements and test methods |
| ISO 8366-1987 |
涂敷磨料砂帶制品.非標準制品的尺寸公差 |
Coated abrasive products; Dimensional tolerances on non-standard conversions |
| ISO 8367-1-1993 |
包裝.一般用途袋子的尺寸公差.第1部分:紙袋 |
Packaging; dimensional tolerances for general purpose sacks; part 1: paper sacks |
| ISO 8367-2-1993 |
包裝.一般用途袋子的尺寸公差.第2部分:熱塑塑料薄膜袋 |
Packaging; dimensional tolerances for general purpose sacks; part 2: sacks made from thermoplastic flexible film |
| ISO 8368-1999 |
水文測定.用構架對開放明渠的流量測定.構架選擇指南 |
Hydrometric determinations - Flow measurements in open channels using structures - Guidelines for selection of structure |
| ISO 8370-1-1993 |
皮帶傳動.測定俯仰區位置的動態試驗.第1部分:V形皮帶 |
Belt drives; dynamic test to determine pitch zone location; part 1: V-belts |
| ISO 8370-2-1993 |
皮帶傳動.測定仰區位置的動態試驗.第2部分:V形有筋皮帶 |
Belt drives; dynamic test to determine pitch zone location; part 2: V-ribbed belts |
| ISO 8371-1994 |
鐵礦石.爆裂系數的測定 |
Iron ores - Determination of decrepitation index |
| ISO 8372-1987 |
信息處理.64位字組密碼算法的操作方式 |
Information processing; Modes of operation for a 64-bit block cipher algorithm |
| ISO 8373 AMD 1-1996 |
操作工業機器人的詞匯.補充件1:附錄B:多種語言的附錄 |
Manipulating industrial robots - Vocabulary; Amendment 1: Annex B - Multilingual annex |
| ISO 8373 Technical Corrigendum 1-1996 |
操作工業機器人.詞匯.技術勘誤1 |
Manipulating industrial robots - Vocabulary; Technical corrigendum 1 |
| ISO 8373-1994 |
操作工業機器人.詞匯 |
Manipulating industrial robots - Vocabulary |
| ISO 8374-2001 |
攝影.ISO安全光條件的測定 |
Photography - Determination of ISO safelight conditions |
| ISO 8375-1985 |
結構尺寸的實心木材.某些物理和機械性能的測定 |
Solid timber in structural sizes; Determination of some physical and mechanical properties |
| ISO 8377-1-1992 |
娛樂旅居車.大篷車.第1部分:居住要求 |
Leisure accomodation vehicles; motor caravans; part 1: habitation requirements |
| ISO 8377-2-1992 |
娛樂旅居車.大篷車.第2部分:燃油和燃液化石油氣的空間加熱器的安裝 |
Leisure accomodation vehicles; motor caravans; part 2: installation of oil-fired and liquefied petroleum gas-fired space heaters |
| ISO 8378-1-1986 |
信息處理.以限定的頻率7958次磁通變換/弧度和3.8次變換/mm(96次變換/in)在兩側調制錄制的130mm(5.25in)盒式軟磁盤的數據交換.第1部分:尺寸、物理和磁性特征 |
Information processing; Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 3,8 tpmm (96 tpi), on both sides; Part 1 : Dimensional, physical and magnetic characteristics |
| ISO 8378-2-1986 |
信息處理.以限定的頻率7958次磁通變換/弧度和3.8次變換/mm(96次變換/in)在兩側調制錄制的130mm(5.25in)盒式軟磁盤的數據交換.第2部分:磁道排列格式A |
Information processing; Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 3,8 tpmm (96 tpi), on both sides; Part 2 : Track format A |
| ISO 8378-3-1986 |
信息處理.以限定的頻率7958ftprad和3.8tpmm(96次變/in)在兩側調制錄制的130mm(5.25in)盒式軟磁盤的數據交換.第3部分:磁道格式B |
Information processing; Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad; 3,8 tpmm (96 tpi), on both sides; Part 3 : Track format B |
| ISO 8379 AMD 1-2001 |
不平地帶卡車.穩定性試驗.修改件1 |
Rough terrain trucks - Stability tests; Amendment 1 |
| ISO 8379-1998 |
越野卡車.穩定性試驗 |
Rough terrain trucks - Stability tests |
| ISO 838-1974 |
紙.通用裝訂孔.規格 |
Paper; Holes for general filing purposes; Specifications |
| ISO 8380-1993 |
林業機械.手提式灌木切割機和修草機.切割裝置保護強度 |
Forestry machinery; portable brush cutters and grass-trimmers; cutting attachment guard strength |
| ISO 8381-2000 |
以奶為基料的嬰兒食品.脂肪含量的測定.重量分析法(基準方法) |
Milk-based infant foods - Determination of fat content - Gravimetric method (Reference method) |
| ISO 8382-1988 |
用于人的復蘇器 |
Resuscitators intended for use with humans |
| ISO 8383-1985 |
船上升降機.具體要求 |
Lifts on ships; Specific requirements |
| ISO 8384-2000 |
船舶和造船技術.挖泥船.詞匯 |
Ships and marine technology - Dredgers - Vocabulary |
| ISO 8385-1999 |
船和海船術語.挖泥船.分類 |
Ships and marine technology - Dredgers - Classification |
| ISO 8388-1998 |
針織物.種類.詞匯 |
Knitted fabrics - Types - Vocabulary |
| ISO 839-1-1976 |
7/24錐度的銑刀軸.第1部分:尺寸 |
Milling machine arbors with 7/24 tapers; Part I : Dimensions |
| ISO 839-2-1977 |
7/24錐度的銑刀軸.第2部分:附件 |
Milling machine arbors with 7/24 tapers; Part II : Accessories |
| ISO 8391-1-1986 |
食品的陶瓷蒸煮器皿.鉛和鎘的釋放.第1部分:試驗方法 |
Ceramic cookware in contact with food; Release of lead and cadmium; Part 1 : Method of test |
| ISO 8391-2-1986 |
食品的陶瓷蒸煮器皿.鉛和鎘的釋放.第2部分:容許范圍 |
Ceramic cookware in contact with food; Release of lead and cadmium; Part 2 : Permissible limits |
| ISO 8394-1988 |
建筑結構.接縫產品.單組分密封劑可擠壓性的測定 |
Building construction; jointing products; determination of extrudability of one-component sealants |
| ISO 8395-1995 |
電影攝影.70 mm 電影磁帶再生產的試驗膠片的出版印刷規范 |
Cinematography - Test films for the reproduction of 70 mm motion-picture release prints with magnetic stripes - Specifications |
| ISO 8397-1988 |
固體肥料和土壤改良劑.篩分試驗 |
Solid fertilizers and soil conditioners; test sieving |
| ISO 8398-1989 |
固體肥料.靜態休止角的測量 |
Solid fertilizers; measurement of static angle of repose |
| ISO 8399-1-1998 |
航空航天.附屬設備和安裝法蘭(米制系列).第1部分:設計規范 |
Aerospace - Accessory drives and mounting flanges (Metric series) - Part 1: Design criteria |
| ISO 8399-2-1998 |
航空航天.附屬設備和安裝法蘭(米制系列).第2部分:尺寸 |
Aerospace - Accessory drives and mounting flanges (Metric series) - Part 2: Dimensions |
| ISO 8400-1985 |
電影技術.16mm電影拷貝乳劑層面的位置.標志 |
Cinematography; Position of emulsion surface of 16 mm motion-picture prints; Identification |
| ISO 8401-1986 |
金屬鍍層.延展性的測量方法述評 |
Metallic coatings; Review of methods of measurement of ductility |
| ISO 8404-1986 |
角銷.基本尺寸 |
Angle pins; Basic dimensions |
| ISO 8404-2003 |
鑄模用工具.斜銷 |
|
| ISO 8404-2003 |
鑄模用工具.斜銷 |
|
| ISO 8405-1998 |
鑄模工具.圓柱頭頂桿的推頂套.一般用途的基本系列 |
Tools for moulding - Ejector sleeves with cylindrical head - Basic series for general purposes |
| ISO 8406-2001 |
鑄模用工具.鑄�；�.圓形定位件和墊片 |
Tools for moulding - Mould bases - Round locating elements and spacers |
| ISO 8407-1991 |
金屬和合金的耐腐蝕性.腐蝕試樣中腐蝕生成物的清除 |
Corrosion of metals and alloys; removal of corrosion products from corrosion test specimens |
| ISO 841-2001 |
工業自動化系統和集成.機床的數字控制.坐標系和運動專用術語 |
Industrial automation systems and integration - Numerical control of machines - Coordinate system and motion nomenclature |
| ISO 8419-2003 |
帶傳動.窄V帶.截面9N/J, 15N/J和25N/J(有效長度系列) |
Belt drives - Narrow V-belts - Sections 9N/J, 15N/J and 25N/J (lengths in the effective system) |
| ISO 8419-2003 |
帶傳動.窄V帶.截面9N/J, 15N/J和25N/J(有效長度系列) |
|
| ISO 8420 Technical Corrigendum 1-2004 |
動植物脂肪和油.極性化合物的含量測定.技術勘誤1 |
|
| ISO 8420-2002 |
動植物脂肪和油.極性化合物含量測定 |
Animal and vegetable fats and oils - Determination of content of polar compounds |
| ISO 8421-1-1987 |
火災防護措施.詞匯.第1部分:火災的一般術語和現象.兩種語言版 |
Fire protection; Vocabulary; Part 1 : General terms and phenomena of fire Bilingual edition |
| ISO 8421-2-1987 |
火災防護措施.詞匯.第2部分:結構性防火.兩種語言版 |
Fire protection; Vocabulary; Part 2 : Structural fire protection Bilingual edition |
| ISO 8421-3-1989 |
火災防護措施.詞匯.第3部分:火警的探測和報警 |
Fire protection; vocabulary; part 3: fire detection and alarm |
| ISO 8421-4-1990 |
火災防護措施.詞匯.第4部分:滅火設備 |
Fire protection; vocabulary; part 4: fire extinction equipment |
| ISO 8421-5-1988 |
防火.術語.第5部分:煙霧控制 |
Fire protection; vocabulary; part 5: smoke control |
| ISO 8421-6-1987 |
火災防護措施.詞匯.第6部分:撤離和疏散方式.兩種語言版 |
Fire protection; Vocabulary; Part 6 : Evacuation and means of escape Bilingual edition |
| ISO 8421-7-1987 |
火災防護措施.詞匯.第7部分:爆炸的探測和排除方法.兩種語言版 |
Fire protection; Vocabulary; Part 7 : Explosion detection and suppression means Bilingual edition |
| ISO 8421-8-1990 |
火災防護措施.詞匯.第8部分:消防.營救設施和使用危險器材的專用術語 |
Fire protection; vocabulary; part 8: terms specific to fire-fighting, rescue services and handling hazardous materials |
| ISO 8422 Technical Corrigendum 1-1993 |
屬性檢驗的序列抽樣方案.技術勘誤表1 |
Sequential sampling plans for inspection by attributes; technical corrigendum 1 |
| ISO 8422-1991 |
計數檢驗的序貫抽樣方案 |
Sequential sampling plans for inspection by attributes |
| ISO 8423 Technical Corrigendum 1-1993 |
百分比不一致(已知標準偏差)用變量檢驗的序列抽樣方案.技術勘誤表1 |
Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation); technical corrigendum 1 |
| ISO 8423-1991 |
不合格百分率計量檢驗的序貫抽樣方案(已知標準偏差) |
Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) |
| ISO 8424-1996 |
光學玻璃坯料.抗25℃含水酸溶液腐蝕性.試驗和分類 |
Raw optical glass - Resistance to attack by aqueous acidic solutions at 25 鳦 - Test method and classification |
| ISO 8425-1987 |
純硝酸钚溶液中钚的測定.重量法 |
Determination of plutonium in pure plutonium nitrate solutions; Gravimetric method |
| ISO 8426-1988 |
液壓傳動.正排量泵及電動機.確定導出的負載能力 |
Hydraulic fluid power; positive displacement pumps and motors; determination of derived capacity |
| ISO 8429-1986 |
光學和光學儀器.眼科學.分度盤刻度 |
Optics and optical instruments; Ophthalmology; Graduated dial scale |
| ISO 843-1997 |
信息和文獻工作.希臘字符對拉丁字符的轉換 |
Information and documentation - Conversion of Greek characters into Latin characters |
| ISO 8430-1-1988 |
電阻點焊.電極夾具.第1部分:錐形接頭錐度1:10 |
Resistance spot welding; electrode holders; part 1: taper fixing 1:10 |
| ISO 8430-2-1988 |
電阻點焊.電極夾具.第2部分:莫氏(morse)錐形接頭 |
Resistance spot welding; electrode holders; part 2: Morse taper fixing |
| ISO 8430-3 Technical Corrigendum 1-1990 |
電阻點焊.焊條夾.第3部分:直柄端推入固定.技術勘誤表1 |
Resistance spot welding; electrode holders; part 3: parallel shank fixing for end thrust; technical corrigendum 1 |
| ISO 8430-3-1988 |
電阻點焊.電極夾具.第3部分:端推力直柄接頭 |
Resistance spot welding; electrode holders; part 3: parallel shank fixing for end thrust |
| ISO 8431-1988 |
造船.固定式轉臂起重機.船用一般貨物動臂起重機 |
Shipbuilding; fixed jib cranes; ship mounted type for general cargo handling |
| ISO 8432-1987 |
香精油.用高性能液相色譜法分析.一般方法 |
Essential oils; Analysis by high performance liquid chromatography; General method |
| ISO 8434-1-1994 |
液壓傳動和通用金屬導管的接頭.第1部分:24度壓合接頭 |
Metallic tube connections for fluid power and general use - Part 1: 24?compression fittings |
| ISO 8434-2-1994 |
液壓及通用金屬管件.第2部分:37度喇叭口管件 |
Metallic tube fittings for fluid power and general use - Part 2: 37 flared fittings |
| ISO 8434-3-1995 |
液壓及通用金屬管件.第3部分:O形面密封管件 |
Metallic tube connections for fluid power and general use - Part 3: O-ring face seal fittings |
| ISO 8434-4-1995 |
液壓及通用金屬管連接件.第4部分:有O形面密封焊制管接頭的24度圓錐體連接件 |
Metallic tube connections for fluid power and general use - Part 4: 24?cone connectors with O-ring weld-on nipples |
| ISO 8434-5-1995 |
液壓及通用金屬連接管件.第5部分:加螺紋液壓傳動連接管件的試驗方法 |
Metallic tube connections for fluid power and general use - Part 5: Test methods for threaded hydraulic fluid power connections |
| ISO 8437 AMD 1-1997 |
掃雪機.安全要求和試驗程序.修改件1 |
Snowthrowers - Safety requirements and test procedures; Amendment 1 |
| ISO 8437-1989 |
掃雪機.安全要求和試驗程序 |
Snowthrowers; Safety requirements and test procedures |
| ISO 8439-1990 |
形狀設計.基本配置 |
Forms design; basic layout |
| ISO 844-2001 |
硬質泡沫塑料.壓縮特性的測定 |
Rigid cellular plastics - Determination of compression properties |
| ISO 844-2004 |
硬性泡沫塑料.壓縮特性的測定 |
|
| ISO 8440 Technical Corrigendum 1-2000 |
貿易文件中代碼的位置.技術勘誤1 |
Location of codes in trade documents - Technical Corrigendum 1 |
| ISO 8440-1986 |
貿易文件編碼位置 |
Location of codes in trade documents |
| ISO 8442-1-1997 |
與餐具有關的材料和物件.餐具和凹形餐具.第1部分:食物準備餐具的要求 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 1: Requirements for cutlery for the preparation of food |
| ISO 8442-3-1997 |
與餐具有關的材料和物件.餐具和凹形餐具.第3部分:銀盤和裝飾性凹盤的要求 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 3: Requirements for silver-plated table and decorative holloware |
| ISO 8442-5-2004 |
與食品接觸的材料和制品.刀具和凹形餐具.第5部分:刀具的鋒利性和刃口保持的試驗規范 |
|
| ISO 8442-6-2000 |
與食品接觸的材料和物品.餐具和凹型餐具.第6部分:薄鍍銀的由清漆保護的臺式凹形餐具 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 6: Lightly silver-plated table holloware protected by lacquer |
| ISO 8442-7-2000 |
與食品接觸的材料和物品.餐具和凹型餐具.第7部分:由銀、其他貴金屬及其合金制成的刀叉餐具的要求 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 7: Requirements for table cutlery made of silver, other precious metals and their alloys |
| ISO 8442-8-2000 |
與食品接觸的材料和物品.餐具和凹型餐具.第8部分:銀制餐具和裝飾性凹形餐具的要求 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 8: Requirements for silver table and decorative holloware |
| ISO 8443-1999 |
滾動軸承.帶法蘭外圈的徑向滾珠軸承.法蘭尺寸 |
Rolling bearings - Radial ball bearings with flanged outer ring - Flange dimensions |
| ISO 8444-1985 |
管道工程.雙層重疊式柔性金屬軟管(保護性碳鋼壁內環形截面的有限密封銅脹環型) |
Pipework; Double overlap flexible metal hoses (copper packing, limited tightness, circular section, in protected carbon steel) |
| ISO 8445-1995 |
管道工程.雙層重疊式柔性金屬軟管(保護性碳鋼壁內環形截面的有限密封石棉脹環型) |
Pipework - Double overlap flexible metal hoses (with packing, leakproof, circular section, in protected carbon steel) |
| ISO 8446-1995 |
管道工程 .雙層重疊式柔性金屬軟管(奧氏體不銹鋼環形截面的密封石棉脹環型) |
Pipework - Double overlap flexible metal hoses (with packing, leakproof, circular section, in austenitic stainless steel) |
| ISO 8447-1986 |
管道工程.單層重疊式柔性金屬軟管(保護性碳鋼壁內環形或多邊形截面的有限密封橡膠脹環型) |
Pipework; Single overlap flexible metal hoses (rubber packing, limited tightness, circular or polygonal section, in protected carbon steel) |
| ISO 8448-1986 |
管道工程.雙層重疊式柔性金屬軟管(保護性碳鋼壁內環形或多邊形截面有限密封的無脹環型) |
Pipework; Double overlap flexible metal hoses (unpacked, limited tightness, circular or polygonal section, in protected carbon steel) |
| ISO 8449-1995 |
管道工程.單層重疊式撓性金屬軟管(保護性碳鋼壁內環形或多邊形截面的有限密封石棉脹環型) |
Pipework - Single overlap flexible metal hoses (with packing, limited tightness, circular or polygonal section, in protected carbon steel) |
| ISO 845-1988 |
泡沫橡膠和塑料.表觀密度的測定 |
Cellular plastics and rubbers; determinaiton of apparent (bulk) density |
| ISO 8450-1986 |
管道工程.單層重疊式柔性金屬軟管(保護性碳鋼壁內環形或多邊形截面的無密封和無脹環型) |
Pipework; Single overlap flexible metal hoses (unpacked, no tightness, circular or polygonal section, in protected carbon steel) |
| ISO 8454-1995 |
卷煙.霧相煙霧中一氧化碳的測定(非色散紅外分析法) |
Cigarettes - Determination of carbon monoxide in the vapour phase of cigarette smoke - NDIR method |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com