標準號 |
中文名稱 |
英文名稱 |
| ISO 16091-2002 |
航天系統.統一的后勤支援 |
Space systems - Integrated logistic support |
| ISO 161-1-1996 |
流體輸送用熱塑性塑料管材.公稱外徑和公稱壓力.第1部分:米制系列 |
Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures - Part 1: Metric series |
| ISO 161-2-1996 |
輸送流體用熱塑塑料管.公稱外徑和公稱壓力.第2部分:英制系列 |
Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures - Part 2: Inch-based series |
| ISO 16100-1-2002 |
工業自動化系統和集成.交替使用性的軟件生產能力.第1部分:框架 |
Industrial automation systems and integration - Manufacturing software capability for interoperability - Part 1: Framework |
| ISO 16100-2-2003 |
工業自動化系統和集成.交替使用性的軟件生產能力輪廓.第2部分:輪廓編制法 |
(Industrial automation systems and integration - Manufacturing software capability profiling for interoperability - Part 2: Profiling methodology) |
| ISO 16100-2-2003 |
工業自動化系統和集成.交替使用性的軟件生產能力輪廓.第2部分:輪廓編制法 |
|
| ISO 16101-2004 |
包裝.危險貨物的運輸包裝.塑料兼容性試驗 |
|
| ISO 16104-2003 |
包裝.危險物品的運輸包裝.試驗方法 |
(Packaging - Transport packaging for dangerous goods - Test methods) |
| ISO 16104-2003 |
包裝.危險物品的運輸包裝.試驗方法 |
|
| ISO 16107-1999 |
工作場所空氣.普及型取樣器的性能評估協議 |
Workplace atmospheres - Protocol for evaluating the performance of diffusive samplers |
| ISO 16120-1-2001 |
轉換金屬絲用非合金鋼線材.第1部分:一般要求 |
Non-alloy steel wire rod for conversion to wire - Part 1: General requirements |
| ISO 16120-2-2001 |
轉換金屬絲用非合金鋼線材.第2部分:通用金屬線特殊要求 |
Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general purpose wire rod |
| ISO 16120-3-2001 |
轉換金屬絲用非合金鋼線材.第3部分:沸騰和沸騰替代低碳鋼金屬線特殊要求 |
Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed-substitute, low-carbon steel wire rod |
| ISO 16120-4-2001 |
轉換金屬絲用非合金鋼線材.第4部分:特殊用途金屬線的特殊要求 |
Non-alloy steel wire rod for conversion to wire - Part 4: Specific requirements for wire rod for special applications |
| ISO 16124-2004 |
鋼絲棒.尺寸和公差 |
|
| ISO 16132-2004 |
球墨鑄鐵管和配件.水泥灰漿襯套的封裝層 |
|
| ISO 16133-2004 |
土壤質量.監測程序的建立和維護指南 |
|
| ISO 1614-1976 |
工業用甘油.試樣和試驗方法.總則 |
Glycerines for industrial use; Samples and test methods; General |
| ISO 16140-2003 |
食品和動物飼料的微生物學.備用法驗證協議 |
(Microbiology of food and animal feeding stuffs - Protocol for the validation of alternative methods) |
| ISO 16140-2003 |
食品和動物飼料的微生物學.備用法驗證協議 |
|
| ISO 16143-1-2004 |
通用不銹鋼.第1部分:扁平制品 |
|
| ISO 16143-2-2004 |
通用不銹鋼.第2部分:半成品棒材、桿材和型材 |
|
| ISO 16147-2002 |
小艇.艇內柴油發動機.裝在發動機上的燃油和電氣件 |
Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components |
| ISO 1615-1976 |
工業用甘油.酸堿度的測定.滴定法 |
Glycerines for industrial use; Determination of alkalinity or acidity; Titrimetric method |
| ISO 16156-2004 |
機床安全性.工件夾具用卡盤的設計和建造的安全性要求 |
|
| ISO 1616-1976 |
工業用甘油.硫酸鹽灰分的測定.重量法 |
Glycerines for industrial use; Determination of sulphated ash; Gravimetric method |
| ISO 16160-2000 |
連續熱軋鋼薄板產品.尺寸和形狀公差 |
Continuously hot-rolled steel sheet products - Dimensional and shape tolerances |
| ISO 16162-2000 |
連續冷軋鋼薄板產品.尺寸和形狀公差 |
Continuously cold-rolled steel sheet products - Dimensional and shape tolerances |
| ISO 16163-2000 |
連續熱浸鍍鋼薄板產品.尺寸和形狀公差 |
Continuously hot-dipped coated steel sheet products - Dimensional and shape tolerances |
| ISO 16165-2001 |
船舶和海洋技術.海洋環境保護.與漏油反應有關術語 |
Ships and marine technology - Marine environment protection - Terminology relating to oil spill response |
| ISO 1617-1976 |
金屬鋁生產用氧化鋁.鈉含量的測定.火焰發射分光光度法 |
Aluminium oxide primarily used for the production of aluminium; Determination of sodium content; Flame emission spectrophotometric method |
| ISO 1618-1976 |
金屬鋁生產用氧化鋁.釩含量的測定.N-苯甲酰-N-苯胲光度法 |
Aluminium oxide primarily used for the production of aluminium; Determination of vanadium content; N-Benzoyl-N-phenylhydroxylamine photometric method |
| ISO 16183-2002 |
重型機車.未處理排氣的氣體排放測量和瞬變?cè)囼?yàn)條件下用部分流體稀釋系統測量粒子排放 |
Heavy-duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions |
| ISO 16185-2000 |
道路車輛.重型車輛檢定用發動機系列.廢氣排放 |
Road vehicles - Engine families for certification of heavy-duty vehicles - Exhaust emissions |
| ISO 1619-1976 |
天然和人造冰晶石.試驗樣品的制備和貯存 |
Cryolite, natural and artificial; Preparation and storage of test samples |
| ISO 162-1985 |
電影技術.35mm磁片上三聲軌.四聲軌或六聲軌和17.5mm磁片上單聲軌錄音磁頭的縫隙和聲帶.位置和寬度尺寸 |
Cinematography; Head gaps and sound records for three-, four-, or six-track magnetic sound records on 35 mm and single-track on 17,5 mm motion-picture film containing no picture; Positions and width dimensions |
| ISO 1620-1976 |
天然和人造冰晶石.二氧化硅含量的測定.還原硅鉬酸鹽分光光度法 |
Cryolite, natural and artificial; Determination of silica content; Reduced molybdosilicate spectrophotometric method |
| ISO 16200-1-2001 |
工作場所空氣質量.用溶劑解析/氣相色譜法對揮發性有機化合物的取樣和分析.第1部分:抽吸取樣法 |
Workplace air quality - Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography - Part 1: Pumped sampling method |
| ISO 16200-2-2000 |
工作場所空氣質量.用溶劑解析和氣相色譜法抽樣和分析揮發性或有機化合物.第2部分:擴散抽樣法 |
Workplace air quality - Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography - Part 2: Diffusive sampling method |
| ISO 1622-1-1994 |
塑料.聚苯乙烯(PS)模塑和擠塑材料.第1部分:命名體系和基本規范 |
Plastics - Polystyrene (PS) moulding and extrusion materials - Part 1: Designation system and basis for specifications |
| ISO 1622-2-1995 |
塑料-模塑材料.聚苯乙烯(PS)-模塑材料.性能的測定 |
Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties |
| ISO 16220 Technical Corrigendum 1-2000 |
鎂和鎂合金.鎂合金鑄錠和鑄件.技術勘誤1 |
Magnesium and magnesium alloys - Magnesium alloy ingots and castings; Technical Corrigendum 1 |
| ISO 16220-2000 |
鎂和鎂合金.鎂合金鑄錠和鑄件 |
Magnesium and magnesium alloys - Magnesium alloy ingots and castings |
| ISO 16221-2001 |
水質.海洋環境中生物降解能力測定的指南 |
Water quality - Guidance for determination of biodegradability in the marine environment |
| ISO 1624-2001 |
塑料.氯乙烯均聚物和共聚物樹脂.水中篩析 |
Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis in water |
| ISO 16247-2004 |
道路車輛.排氣系統泄漏的檢測.氦試驗方法和探測裝置規范 |
|
| ISO 16264-2002 |
水質.用流量分析法(FIA 和 CFA)和光度計檢測法測定可溶性硅酸鹽 |
Water quality - Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection |
| ISO 16269-7-2001 |
數據的統計解釋.第7部分:中位數.估計和置信區間 |
Statistical interpretation of data - Part 7: Median; Estimation and confidence intervals |
| ISO 16269-8-2004 |
數據的統計說明.第8部分:預測差異的測定 |
|
| ISO 16273-2003 |
船舶和海上技術.高速船舶用夜視設備.操作和性能要求、試驗方法和要求的試驗結果 |
(Ships and marine technology - Night vision equipment for high-speed craft - Operational and performance requirements, methods of testing and required test results ) |
| ISO 16273-2003 |
船舶和海上技術.高速船舶用夜視設備.操作和性能要求、試驗方法和要求的試驗結果 |
|
| ISO 1628-1-1998 |
塑料.用毛細粘度計測定稀釋溶液中聚合物的粘度值.第1部分:一般原理 |
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscosimeters - Part 1: General principles |
| ISO 1628-2-1998 |
塑料.使用毛細管粘度計測定稀釋溶液中聚合物的粘度.第2部分:聚氯乙烯樹脂 |
Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 2: Poly(vinyl chloride) resins |
| ISO 1628-3-2001 |
塑料.用毛細管粘度計測定稀薄溶液的粘度.第3部分:聚乙烯和聚丙烯 |
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3: Polyethylenes and polypropylenes |
| ISO 1628-4-1999 |
塑料.使用毛細管粘度計在稀釋溶液中測定聚合物的粘度值.第4部分:聚碳酸酯(PC)模塑和擠塑材料 |
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 4: Polycarbonate (PC) moulding and extrusion materials |
| ISO 1628-5-1998 |
塑料.使用毛細管粘度計在稀溶液中測定聚合物的粘度.第5部分:熱塑性聚酯均聚物和共聚物 |
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5 : Thermoplastic polyester (TP) homopolymers and copolymers |
| ISO 1628-6-1990 |
塑料.粘度數和極限粘度數的測定.第6部分:甲基丙烯酸甲酯聚合物 |
Plastics; determination of viscosity number and limiting viscosity number; part 6: methyl methacrylate polymers |
| ISO 16284-2001 |
眼科光學.眼科光學設備的信息交換 |
Ophthalmic optics - Information interchange for ophthalmic optical equipment |
| ISO 1629-1995 |
橡膠和膠乳.命名 |
Rubbers and latices - Nomenclature |
| ISO 16328-2001 |
船舶和海上技術.高速船舶用陀螺羅盤 |
Ships and marine technology - Gyro-compasses for high-speed craft |
| ISO 16329-2003 |
船舶和海上技術.高速船舶的航向控制系統 |
(Ships and marine technology - Heading control systems for high-speed craft) |
| ISO 16329-2003 |
船舶和海上技術.高速船舶的航向控制系統 |
|
| ISO 16330-2003 |
往復式變?nèi)菡婵毡煤捅醚b置.技術要求 |
(Reciprocating positive displacement pumps and pump units - Technical requirements) |
| ISO 16330-2003 |
往復式變?nèi)菡婵毡煤捅醚b置.技術要求 |
|
| ISO 16333-2004 |
大型商用車輛和客車.穩態傾翻閾.傾斜臺試驗方法 |
|
| ISO 16348-2003 |
金屬和其他無機覆層.定義和外觀約定 |
(Metallic and other inorganic coatings - Definitions and conventions concerning appearance) |
| ISO 16348-2003 |
金屬和其他無機覆層.定義和外觀約定 |
|
| ISO 16366-2001 |
沖壓用設備.L形導向 |
Tools for pressing - L-shaped guides |
| ISO 16367-2001 |
沖壓用工具.導板.U形和V形塊 |
Tools for pressing - Guide plates - U- and V-blocks |
| ISO 16368-2003 |
移動式升降工作臺.設計計算、安全要求和試驗方法 |
(Mobile elevating work platforms - Design calculations, safety requirements and test methods) |
| ISO 16368-2003 |
移動式升降工作臺.設計計算、安全要求和試驗方法 |
|
| ISO 16369-2000 |
提升工作平臺.爬升桿式工作平臺 |
Elevating work platforms - Mast-climbing work platforms |
| ISO 16387-2004 |
土壤質量.污染物對線蚓科的影響.對繁殖和存活率影響的測定 |
|
| ISO 16391-2002 |
造口術和失禁輔助器具.沖洗設備.要求和試驗方法 |
Aids for ostomy and incontinence - Irrigation sets - Requirements and test methods |
| ISO 16408-2004 |
牙科學.口腔衛生制品.口腔沖洗 |
|
| ISO 1641-1-1978 |
端銑刀和槽銑刀.第1部分:直柄銑刀 |
End mills and slot drills; Part I : Milling cutters with parallel shanks |
| ISO 1641-1-2003 |
端銑刀和槽銑刀.第1部分:直柄銑刀 |
(End mills and slot drills - Part 1: Milling cutters with cylindrical shanks) |
| ISO 1641-1-2003 |
端銑刀和槽銑刀.第1部分:直柄銑刀 |
|
| ISO 1641-2-1978 |
端銑刀和槽銑刀.第2部分:莫氏錐柄銑刀 |
End mills and slot drills; Part II : Milling cutters with Morse taper shanks |
| ISO 1641-3-1978 |
端銑刀和槽銑刀.第3部分:7/24錐柄銑刀 |
End mills and slot drills; Part III : Milling cutters with 7/24 taper shanks |
| ISO 1641-3-2003 |
端銑刀和槽銑刀.第3部分:7/24錐柄銑刀 |
(End mills and slot drills - Part 3: Milling cutters with 7/24 taper shanks) |
| ISO 1641-3-2003 |
端銑刀和槽銑刀.第3部分:7/24錐柄銑刀 |
|
| ISO 16426-2002 |
緊固件.質量保證體系 |
Fasteners - Quality assurance system |
| ISO 16429-2004 |
外科植入物.金屬可植入材料和過期醫療設備的開放電路潛在腐蝕性能測量 |
|
| ISO 16446-2002 |
船舶和航海技術.海洋環境保護.連接不同的臂式連接器的適配器 |
Ships and marine technology - Marine environmental protection - Adaptor for joining dissimilar boom connectors |
| ISO 16458-2004 |
航天系統.不載人航天器運輸.一般要求 |
|
| ISO 16462-2004 |
鑲片或?qū)嵭牧⒎叫蔚痂傹X.尺寸、類型 |
|
| ISO 16463-2004 |
鑲片多晶體金剛石鑲齒.尺寸、類型 |
|
| ISO 16467-2003 |
包裝.危險品用運輸包裝件.IBCs用試驗方法 |
(Packaging - Transport packages for dangerous goods - Test methods for IBCs) |
| ISO 16467-2003 |
包裝.危險品用運輸包裝件.IBCs用試驗方法 |
|
| ISO 16484-2-2004 |
建筑自動化和控制系統(BACS).第2部分:硬件 |
|
| ISO 16484-5-2003 |
建筑自動化和控制系統.第5部分:數據通信協議 |
(Building automation and control systems - Part 5: Data communication protocol) |
| ISO 16484-5-2003 |
建筑自動化和控制系統.第5部分:數據通信協議 |
|
| ISO 1651 AMD 1-1982 |
第1次修改 |
Tube drawing mandrels; amendment 1 |
| ISO 1651-1974 |
拔管心軸 |
Tube drawing mandrels |
| ISO 1652-1985 |
橡膠膠乳.粘度的測定 |
Rubber latex; Determination of viscosity |
| ISO 1652-2004 |
橡膠膠乳.用布洛氏布洛克菲爾德試驗方法測定表觀粘度 |
|
| ISO 16549-2004 |
紡織物.纖維繩的不均勻性.容量法 |
|
| ISO 1656-1996 |
天然生橡膠和天然橡膠膠乳.氮含量的測定 |
Rubber, raw natural, and rubber latex, natural - Determination of nitrogen content |
| ISO 16564-2004 |
天然橡膠.由尺寸排除色譜法測定平均分子質量和分子質量分布 |
|
| ISO 16565-2002 |
橡膠.乙烯-丙烯-二烯三共聚物中5-亞乙基-降冰片烯(ENB)或 二聚環戊二烯(DCPD) 的測定 |
Rubber - Determination of 5-ethylidenenorbonene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers |
| ISO 1657-1986 |
生橡膠和橡膠膠乳.鐵含量的測定.1,10非咯啉光度測量法 |
Rubber, raw and rubber latex; Determination of iron content; 1,10-Phenanthroline photometric method |
| ISO 16582-2002 |
開口型盤頭抽芯盲鉚釘.Cu/St或Cu/Br或Cu/SSt |
Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt |
| ISO 16583-2002 |
開口型沉頭抽芯盲鉚釘.Cu/St或Cu/Br或Cu/SSt |
Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt |
| ISO 16584-2002 |
開口型盤頭抽芯盲鉚釘.NiCu/St或NiCu/SSt |
Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCu/SSt |
| ISO 16585-2002 |
封閉型盤頭抽芯盲鉚釘.A2/SSt |
Closed end blind rivets with pull mandrel and protruding head - A2/SSt |
| ISO 16586-2003 |
土質.在已知毛體積干密度基礎上測定為體積分?jǐn)?shù)的土壤含水量.重量分析法 |
(Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method) |
| ISO 16586-2003 |
土質.在已知毛體積干密度基礎上測定為體積分?jǐn)?shù)的土壤含水量.重量分析法 |
|
| ISO 16587-2004 |
機械振動和沖擊.構筑物的工況監控用性能參數 |
|
| ISO 16588 AMD 1-2004 |
水質.六絡合劑的測定.氣相色譜法.修改件1 |
|
| ISO 16588 AMD 1-2004 |
水質.六絡合劑的測定.氣相色譜法.修改件1 |
|
| ISO 16588 AMD 1-2004 |
水質.六絡合劑的測定.氣相色譜法.修改件1 |
|
| ISO 16588-2002 |
水質.六絡合劑的測定.氣相色譜分析法 |
Water quality - Determination of six complexing agents - Gas-chromatographic method |
| ISO 16589-1-2001 |
含熱塑性密封件的旋轉軸唇型密封件.第1部分:標稱尺寸和容差 |
Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 1: Nominal dimensions and tolerances |
| ISO 16589-2-2001 |
含熱塑性密封件的旋轉軸唇型密封件.第2部分:詞匯 |
Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 2: Vocabulary |
| ISO 16589-3-2001 |
含熱塑性密封件的旋轉軸唇型密封件.第3部分:儲存、搬運和安裝 |
Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 3: Storage, handling and installation |
| ISO 16589-4-2001 |
含熱塑性密封件的旋轉軸唇型密封件.第4部分:性能測試程序 |
Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 4: Performance test procedures |
| ISO 16589-5-2001 |
含熱塑性密封件的旋轉軸唇型密封件.第5部分:外觀缺陷的標識 |
Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 5: Identification of visual imperfections |
| ISO 16590-2000 |
水質.汞量測定.用汞齊化濃縮后的方法 |
Water quality - Determination of mercury - Methods involving enrichment by amalgamation |
| ISO 16590-2000 |
水質.汞量測定.用汞齊化濃縮后的方法 |
Water quality - Determination of mercury - Methods involving enrichment by amalgamation |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com