標準號 |
中文名稱 |
英文名稱 |
| BS EN ISO 3727-2-2002 |
黃油.水、非脂固體及脂肪含量的測定.非脂固體含量的測定(參照法) |
(Butter - Determination of moisture, non-fat solids and fat contents - Determination of non-fat solids content (Reference method)) |
| BS EN ISO 3727-3-2003 |
黃油.含水量、非脂肪固體含量和脂肪含量的測定.脂肪含量的計算 |
(Butter - Determination of moisture, non-fat solids and fat contents - Calculation of fat content) |
| BS EN ISO 3735-1999 |
原油和燃料油.沉積物的測定.萃取法 |
(Crude petroleum and fuel oils - Determination of sediment - Extraction method) |
| BS EN ISO 3740-2001 |
聲學.噪聲源的聲壓級的測定.基本標準使用導則 |
(Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards) |
| BS EN ISO 3741-2000 |
聲學.用聲壓測定噪聲源聲音功率級.混響室內的精密方法 |
(Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms) |
| BS EN ISO 3743-1-1994 |
聲學.噪聲源聲功率級的測定.在混響聲場中小聲源和移動聲源的工程測量方法.第1部分:硬墻試驗室的比較分析法 |
(Acoustics - Determination of sound power levels of noise sources - Engineering methods for small, movable sources in reverberant fields - Comparison for hard-walled test rooms) |
| BS EN ISO 3743-2-1995 |
聲學.噪聲源的聲功率級測定.在混響場中對可移動聲源的工程測量方法.用專用混響試驗室的測量方法 |
(Acoustics - Determination of sound power levels of noise sources - Engineering methods for small, movable sources in reverberant fields - Methods for special reverberation test rooms) |
| BS EN ISO 3744-1994 |
聲學.噪聲源音響功率級的測定 |
(Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane) |
| BS EN ISO 3746-1996 |
聲學.噪聲源音響功率級的測定.在反射平面上利用包封測量表面的測量法 |
(Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane) |
| BS EN ISO 3747-2000 |
聲學.利用聲壓測定噪聲源的聲功率級.現場比較法 |
(Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method in situ) |
| BS EN ISO 3759-1995 |
紡織材料.尺寸變化測定用試驗纖維樣品和服裝的制備、做標記和測量 |
(Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change) |
| BS EN ISO 376-2002 |
金屬材料.單軸向試驗機驗證用測力儀的校正 |
(Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines) |
| BS EN ISO 376-2004 |
金屬材料.驗證單軸向試驗機用測力儀的校準 |
|
| BS EN ISO 3766-1999 |
建筑制圖.混凝土加筋的簡化表示法 |
(Construction drawings - Simplified representation of concrete reinforcement) |
| BS EN ISO 3766-2004 |
建筑制圖.混凝土鋼筋的簡化表示法 |
|
| BS EN ISO 3767-1-2000 |
拖拉機、農業和林業機械、除草機和園藝設備.操作者控制符號和其它顯示符號.通用符號 |
(Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Common symbols (review)) |
| BS EN ISO 3767-3-1996 |
拖拉機.農業和林業機械,動力刈草機和園圃設備.操作控制和其它顯示符號.動力刈草機和園圃設備符號 |
(Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Symbols for powered lawn and garden equipment) |
| BS EN ISO 3767-5-1996 |
拖拉機,農業和林業機械.動力除草機和園藝設備.操縱者控制裝置和其它顯示器的符號.第5部分:手動便攜式林業機 |
(Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays. Symbols for manual portable forestry machinery) |
| BS EN ISO 377-1997 |
鍛鋼試樣和試樣的選擇與制備.第1部分:機械性能試驗用的樣品和試樣 |
(Steel and steel products - Location and preparation of samples and test pieces for mechanical testing) |
| BS EN ISO 3785-1995 |
鋼.試件斧的名稱與符號 |
(Steel - Designation of test piece axes) |
| BS EN ISO 3815-1-2005 |
鋅和鋅合金.用光輻射光譜測定法分析固體樣品 |
|
| BS EN ISO 3822-1-1999 |
聲學.用于供水設施的裝置和設備發出的噪音的實驗室試驗.測量方法 |
(Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Method of measurement) |
| BS EN ISO 3822-2-1996 |
聲學.由供水設施和設備發出噪音的實驗室試驗.放水龍頭的安裝和工作條件 |
(Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Mounting and operating conditions for draw-off taps and mixing valves) |
| BS EN ISO 3822-3-1997 |
聲學.由供水設施和設備發出噪音的實驗室試驗.第3部分:管路閥門和附件的安裝和工作條作 |
(Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Mounting and operating conditions for in-line valves and appliances) |
| BS EN ISO 3822-4-1997 |
聲學.由供水設施和設備發出的噪音的實驗室試驗.第4部分:專用裝置的安裝和工作條件 |
(Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Mounting and operating conditions for special appliances) |
| BS EN ISO 3823-1-1999 |
牙科用旋轉器械.牙鉆.鋼制牙鉆和硬質合金牙鉆 |
(Dental rotary instruments - Burs - Steel and carbide burs) |
| BS EN ISO 3823-2-2003 |
牙科用旋轉牙鉆器械.精加工牙鉆 |
(Dental rotary instruments - Burs - Finishing burs) |
| BS EN ISO 3830-1996 |
石油產品.汽油中鉛含量的測定.一氯化碘法 |
(Petroleum products - Determination of lead content of gasoline - Iodine monochloride method) |
| BS EN ISO 3838-1985 |
原油和液體或固體石油產品的密度或相對密度的測定.(比重瓶法) |
(Methods for determination of density or relative density of petroleum and petroleum products (pyknometer methods)) |
| BS EN ISO 3838-2004 |
石油及其制品的試驗方法.BS 2000-189/190:原油和液體或固體石油產品.密度或相對密度的測定.毛細管塞比重瓶和帶刻度雙毛細管比重瓶法 |
|
| BS EN ISO 3861-1996 |
噴砂用橡膠軟管.規范 |
(Rubber hoses for sand and grit blasting - Specification) |
| BS EN ISO 3868-1995 |
金屬和其他無機物涂層.涂層厚度的測量.菲索(Fizeau)多光束干涉儀法 |
(Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam interferometry method) |
| BS EN ISO 3882-2003 |
金屬和其他無機物覆層.厚度測量方法述評 |
(Metallic and other inorganic coatings - Review of methods of measurement of thickness) |
| BS EN ISO 3887-2003 |
鋼.脫碳層的測定 |
(Steels - Determination of depth of decarburization) |
| BS EN ISO 389-1-2000 |
聲學.音響設備校正標準參考零點.純音和超聽覺式耳機用參考等效閾聲壓級 |
(Acoustics - Reference zero for the calibration of audiometric equipment - Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones) |
| BS EN ISO 389-2-1995 |
聲學.音響設備校正標準參考零點.純音和插入式耳機用參考等效最低限度聲壓級 |
(Acoustics - Reference zero for the calibration of audiometric equipment - Reference equivalent threshold sound pressure levels for pure tones and insert earphones) |
| BS EN ISO 389-7-1998 |
聲學.音響設備校正標準參考零點.在自由領域和非擴散領域聽力條件下聽力參考閾值 |
(Acoustics - Reference zero for the calibration of audiometric equipment - Reference threshold of hearing under free-field and diffuse-field listening conditions) |
| BS EN ISO 389-8-2004 |
聲學.校正聽力設備的基準零級.純音和環繞耳機的基準等效閾聲壓級 |
|
| BS EN ISO 3892-2001 |
金屬材料的轉化涂層.單位面積涂層質量的測定.重量分析法 |
(Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods) |
| BS EN ISO 3915-1999 |
塑料.導電塑料電阻率的測量 |
(Plastics - Measurement of resistivity of conductive plastics) |
| BS EN ISO 3927-2002 |
金屬粉末(不包括硬質合金粉末).單軸向壓縮時壓縮性的測定 |
(Metallic powders, excluding powders for hardmetals - Determination of compressbility in uniaxial compression) |
| BS EN ISO 3946-1994 |
淀粉及其制品磷總含量的測定.分光光度法 |
(Starches and derived products - Determination of total phosphorus content - Spectrometric method) |
| BS EN ISO 3947-1994 |
天然或加工淀粉的脂肪總含量的測定 |
(Starches, native or modified - Determination of total fat content) |
| BS EN ISO 3950-1997 |
牙科學.牙齒和口腔區的名稱體系 |
(Dentistry - Designation system for teeth and areas of the oral cavity) |
| BS EN ISO 3952-1-1995 |
運動圖.第1部分:圖符號 |
(Kinematic diagrams - Graphical symbols - Part 1) |
| BS EN ISO 3952-2-1995 |
運動圖.第2部分:圖符號 |
(Kinematic diagrams - Graphical symbols - Part 2) |
| BS EN ISO 3952-3-1995 |
運動圖.第3部分:圖符號 |
(Kinematic diagrams - Graphical symbols - Part 3) |
| BS EN ISO 3952-4-1997 |
運動圖.圖符號.復雜機械及組件 |
(Kinematic diagrams - Graphical symbols - Miscellaneous mechanisms and their components) |
| BS EN ISO 3953-1995 |
金屬粉末.搖實密度的測定 |
(Metallic powders - Determination of tap density) |
| BS EN ISO 3977-5-2002 |
燃氣輪機.采購.石油和天然氣工業用設施 |
(Gas turbines - Procurement - Applications for petroleum and natural gas industries) |
| BS EN ISO 3993-1996 |
液化石油氣和輕質烴類.密度或相對密度的測定.壓力石油密度計法 |
(Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method) |
| BS EN ISO 3994-2001 |
塑料軟管.抽吸和排放含水物的螺旋熱塑增強的熱塑軟管.規范 |
(Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification) |
| BS EN ISO 4014-2001 |
六角頭螺栓.產品等級A和B |
(Hexagon head bolts - Product grades A and B) |
| BS EN ISO 4016-2001 |
六角頭螺栓.產品等級C |
(Hexagon head bolts - Product grade C) |
| BS EN ISO 4017-2001 |
六角頭螺釘.產品等級A和B |
(Hexagon head screws - Product grades A and B) |
| BS EN ISO 4018-2001 |
六角頭螺釘.產品等級C |
(Hexagon head screws - Product grade C) |
| BS EN ISO 4023-1992 |
蒸氣用橡膠軟管.試驗方法 |
(Rubber hoses for steam - Test methods) |
| BS EN ISO 4032-2001 |
六角頭螺母.1型.產品等級A和B |
(Hexagon nuts, style 1. Product grades A and B) |
| BS EN ISO 4033-2001 |
六角頭螺母.2型.產品等級A和B |
(Hexagon nuts, style 2. Product grades A and B) |
| BS EN ISO 4034-2001 |
六角頭螺母.產品等級C |
(Hexagon nuts - Product grade C) |
| BS EN ISO 4035-2001 |
六角頭薄螺母(倒棱的).產品等級A和B |
(Hexagon thin nuts (chamfered) - Product grades A and B) |
| BS EN ISO 4036-2001 |
六角頭薄螺母(倒棱的).產品等級B |
(Hexagon thin nuts (unchamfered) - Product grade B) |
| BS EN ISO 4042-2000 |
緊固件.電鍍覆層 |
(Fasteners - Electroplated coatings) |
| BS EN ISO 4044-1998 |
皮革.化學試驗樣品的制備 |
(Leather - Preparation of chemical test samples) |
| BS EN ISO 4045-1998 |
皮革.pH值的測定 |
(Leather - Determination of pH) |
| BS EN ISO 4047-1998 |
皮革.硫酸鹽總灰分和硫酸鹽水溶灰分的測定 |
(Leather - Determination of sulphated total ash and sulphated water-insoluble ash) |
| BS EN ISO 4048-1998 |
皮革.二氯甲烷中溶解物質的測定 |
(Leather - Determination of matter soluble in dichloromethane) |
| BS EN ISO 4049-2000 |
牙科學.高聚物基填充材料、復原材料和密封材料 |
(Dentistry - Polymer-based filling, restorative and luting materials) |
| BS EN ISO 4063-2000 |
焊接及有關工藝.工藝和參考值的命名 |
(Welding and allied processes - Nomenclature of processes and reference numbers) |
| BS EN ISO 4066-2000 |
建筑圖紙.棒材表 |
(Construction drawings - Bar scheduling) |
| BS EN ISO 407-2004 |
小型醫用氣瓶.針導軛式閥連接 |
|
| BS EN ISO 4074-2002 |
天然乳膠陰莖套.要求和試驗方法 |
(Natural latex rubber condoms - Requirements and test methods) |
| BS EN ISO 4080-1992 |
橡膠和塑料軟管及軟管組件.透氣性測定 |
(Rubber and plastics hoses and hose assemblies - Determination of permeability to gas) |
| BS EN ISO 4119-1995 |
紙漿.懸浮液濃度的測定 |
(Pulps - Determination of stock concentration) |
| BS EN ISO 4126-1-2004 |
防超壓安全裝置.安全閥 |
|
| BS EN ISO 4126-2-2003 |
防超壓安全裝置.防爆板安全裝置 |
(Safety devices for protection against excessive pressure - Bursting disc safety devices) |
| BS EN ISO 4126-4-2004 |
過壓保護安全設備.由伺服電動機控制的安全閥 |
|
| BS EN ISO 4126-5-2004 |
過壓保護安全設備.可控安全減壓系統(CSPRS) |
|
| BS EN ISO 4126-6-2004 |
過壓保護安全裝置.防爆板安全裝置的應用、選擇和安裝 |
|
| BS EN ISO 4126-6-2004 |
過壓保護安全設備.防爆板安全裝置的應用、選擇和安裝 |
|
| BS EN ISO 4126-6-2004 |
過壓保護安全裝置.防爆板安全裝置的應用、選擇和安裝 |
|
| BS EN ISO 4126-7-2004 |
過壓保護安全設備.通用數據 |
|
| BS EN ISO 4135-2001 |
麻醉和呼吸設備.詞匯 |
(Anaesthetic and respiratory equipment - Vocabulary) |
| BS EN ISO 4142-2002 |
實驗室玻璃器皿.試管 |
(Laboratory glassware - Test tubes) |
| BS EN ISO 4157-1-1999 |
建筑制圖.命名體制.建筑物和建筑物各部分 |
(Construction drawings - Designation systems - Buildings and parts of buildings) |
| BS EN ISO 4157-2-1999 |
建筑制圖.命名體制.房間名稱與號碼 |
(Construction drawings - Designation systems - Room names and numbers) |
| BS EN ISO 4157-3-1999 |
建筑制圖.命名體制.房間識別 |
(Construction drawings - Designation systems - Room identifiers) |
| BS EN ISO 4165-2003 |
道路車輛.電氣連接裝置.雙極連接 |
(Road vehicles - Electrical connections - Double-pole connection) |
| BS EN ISO 4172-1997 |
技術制圖.建筑制圖.預制結構組裝件制圖 |
(Technical drawings - Construction drawings - Drawings for the assembly of prefabricated structures) |
| BS EN ISO 4256-1998 |
液體石油產品.標準蒸氣壓力的測定.LPG法 |
(Liquid petroleum products - Determination of gauge vapour pressure - LPG method) |
| BS EN ISO 4257-2001 |
石油及其產品的試驗方法.液化石油氣取樣方法 |
(Methods of test for petroleum and its products - Liquefied petroleum gases - Method of sampling) |
| BS EN ISO 4259-1996 |
石油產品.與試驗方法有關的精確數據的測定和應用 |
(Petroleum products - Determination and application of precision data in relation to methods of test) |
| BS EN ISO 4263-1-2005 |
石油和相關產品.抗氧化油和流體的老化性測定.TOST試驗.礦物油規程 |
|
| BS EN ISO 4263-2-2003 |
石油及其相關制品.礦物油和流體的老化性的測定.TOST試驗.HFC類液壓液規程 |
(Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Procedure for category HFC hydraulic fluids) |
| BS EN ISO 4264-1997 |
石油和石油產品的試驗方法. 石油產品. 用四個可變化學方程式對中間蒸餾燃料的正十六烷指數的計算. |
(Methods of test for petroleum and its products - Petroleum products - Calculation of cetane index of middle-distillate fuels by the four-variable equation) |
| BS EN ISO 4267-2-1990 |
石油和液體石油制品.油量的計算.第2部分:動態測量 |
(Petroleum and liquid petroleum products - Calculation of oil quantities - Dynamic measurements) |
| BS EN ISO 4287-2000 |
幾何產品規范(GPS).表面特征.輪廓法.術語、定義和表面特征參數 |
(Geometrical product specification (GPS) - Surface texture - Profile method - Terms, definitions and surface texture parameters) |
| BS EN ISO 4288-1997 |
幾何產品規范(GPS).表面特征.輪廓法:表面特征評估的規則和過程 |
(Geometric product specification (GPS) - Surface texture - Profile method: Rules and procedures for the assessment of surface texture) |
| BS EN ISO 4320-1998 |
非離子表面活性劑.濁點指數的測定.容量法 |
(Non-ionic surface active agents - Determination of cloud point index - Volumetric method) |
| BS EN ISO 4404-2-2003 |
石油和相關產品.難燃液壓液抗腐蝕性的測定.不含水液體 |
(Petroleum and related products - Determination of the corrosion resistance fire-resistant hydraulic fluids - Non-aqueous fluids) |
| BS EN ISO 445-1996 |
物料搬運用托盤.詞匯 |
(Pallets for materials handling - Vocabulary) |
| BS EN ISO 4490-2002 |
金屬粉末.用校準漏斗(霍爾流量計)測定流動時間 |
(Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter)) |
| BS EN ISO 4491-2-1999 |
金屬粉末.用還原法測定氧含量.氫還原時的質量損失(氫損失) |
(Metallic powders - Determination of oxygen content by reduction methods - Loss of mass on hydrogen reduction (hydrogen loss)) |
| BS EN ISO 4516-2002 |
金屬和其他無機鍍層.維氏硬度計和努氏顯微硬度試驗機 |
(Metallic and other inorganic coatings - Vickers and Knoop microhardness tests) |
| BS EN ISO 4518-1980 |
金屬鍍層.鍍層厚度的測量.表面光法度輪廓儀法 |
(Metallic coatings - Measurement of coating thickness - Profilometric method) |
| BS EN ISO 4524-3-1986 |
金屬鍍層.電鍍金和金合金鍍層的測試方法.孔隙度的電圖試驗 |
(Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Electrographic tests for porosity) |
| BS EN ISO 4524-6-1989 |
金屬鍍層.電鍍金和金合金鍍層的測試方法.第6部分:殘留鹽類的測定 |
(Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Determination of the presence of residual salts) |
| BS EN ISO 4527-2003 |
金屬覆層.自催化(無電)鎳磷合金覆層.規范和試驗方法 |
(Metallic coatings - Autocatalytic (electroless) nickel-phosphorus alloy coatings - Specification and test methods) |
| BS EN ISO 4536-1986 |
金屬基片上的金屬覆層和無機覆層.鹽滴腐蝕試驗(SD試驗) |
(Metallic and non-organic coatings on metallic substrates - Saline droplets corrosion test (SD test)) |
| BS EN ISO 4538-1979 |
金屬鍍層.硫代乙酰胺腐蝕試驗(TAA試驗) |
(Metallic coatings - Thioacetamide corrosion test (TAA test)) |
| BS EN ISO 4541-1979 |
金屬和其它無機物涂層.涂膏密室耐腐蝕試驗(CORR試驗) |
(Metallic and other non-organic coatings - Corrodkote test (CORR test)) |
| BS EN ISO 4543-1995 |
金屬鍍層和其它無機物涂層.適用于儲存情況的腐蝕試驗一般規則 |
(Metallic and other non-organic coatings - General rules for corrosion tests applicable for storage conditions) |
| BS EN ISO 4566-1995 |
艙內安裝發動機的小型船舶.錐度為1:10螺旋漿軸端和尾軸轂 |
(Small craft with inboard engine - Propeller shaft ends and bosses with 1:10 taper) |
| BS EN ISO 4577-1999 |
塑料.聚丙烯和丙烯共聚物.空氣中氧化熱穩定性的測定.烘箱法 |
(Plastics - Polypropylene and propylene-copolymers - Determination of thermal oxidative stability in air - Oven method) |
| BS EN ISO 4589-3-1996 |
塑料.通過氧指數測定其燃燒性.第3部分:高溫試驗 |
(Plastics - Determination of burning behaviour by oxygen index - Elevated temperature test) |
| BS EN ISO 4590-2003 |
硬質泡沫塑料.開孔和閉孔泡沫的容積百分比的測定 |
(Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells) |
| BS EN ISO 4597-1-1998 |
塑料.環氧樹脂的硬化劑和促進劑.名稱與牌號 |
(Plastics - Hardeners and accelerators for epoxide resins - Designation) |
| BS EN ISO 4599-1991 |
塑料.耐環境應力龜裂的測定.彎曲帶材法 |
(Plastics - Determination of resistance to environmental stress cracking (ESC) - Bent strip method) |
| BS EN ISO 4600-1993 |
塑料.環境應力碎裂的測定(ESC).球或釘壓力法 |
(Plastics - Determination of environmental stress cracking (ESC) - Ball or pin impression method) |
| BS EN ISO 4608-1998 |
塑料.一般用途的氯乙烯均聚物和共聚物樹脂.室溫下增塑劑吸收的測定 |
(Plastics - Homopolymer and copolymer resins of vinyl chloride for general use - Determination of plasticizer absorption at room temperature) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com