標準號 |
中文名稱 |
英文名稱 |
| BS ISO 3271-1996 |
鐵礦石.滾筒粉碎強度的測定 |
Iron ores - Determination of tumble strength |
| BS ISO 3272-1-2003 |
技術圖紙和其他辦公室文件圖紙的縮微照相.操作規程 |
(Microfilming of technical drawings and other drawing office documents - Operating procedures) |
| BS ISO 3272-2-1994 |
技術圖紙和其他辦公室文件圖紙的縮微膠片.質量標準和控制 |
(Microfilming of technical drawings and other drawing office documents - Quality criteria and control of 35 mm silver gelatin microfilms) |
| BS ISO 3272-3-2002 |
技術圖紙和其他辦公室繪圖文件的縮微膠片.35mm縮微膠片用穿孔卡片 |
(Microfilming of technical drawings and other drawing office documents - Aperture card for 35 mm microfilm) |
| BS ISO 3272-4-1994 |
技術制圖和其他辦公室文件制圖的縮微膠片. 專業鏡和超長尺寸制圖的縮微膠片 |
(Microfilming of technical drawings and other drawing office documents - Microfilming of drawings of special and exceptional elongated sizes) |
| BS ISO 3272-5-1999 |
技術圖紙和其他辦公室文件圖紙的縮微膠片.打孔卡片縮微膠片圖形的重氮復制的試驗規程 |
(Microfilming of technical drawings and other drawing office documents - Test procedures for diazo duplicating of microfilm images in aperture cards) |
| BS ISO 3272-6-2000 |
技術圖紙和其他辦公室文件圖紙的縮微膠片.放大35mm縮微膠片用系統的質量標準和控制 |
(Microfilming of technical drawings and other drawing office documents - Quality criteria and control of systems for enlargement from 35mm microfilm) |
| BS ISO 3287-2000 |
機動工業貨車.駕駛員控制符號及其它顯示符號 |
Powered industrial trucks - Symbols for operator controls and other displays |
| BS ISO 3290-2002 |
滾動軸承.滾珠.尺寸和公差 |
Rolling bearings - Balls - Dimensions and tolerances |
| BS ISO 3298-1995 |
攝影技術.加工化工產品.冰醋酸的規范 |
Photography - Processing chemicals - Specifications for glacial acetic acid |
| BS ISO 3299-1995 |
攝影技術.攝影材料加工用化學藥品.1-苯基-3-吡啶烷酮規范 |
Photography - Processing chemicals - Specifications for 1-phenyl-3-pyrazolidinone |
| BS ISO 3322-1996 |
流體動力系統和件.液壓缸.額定壓力 |
Fluid power systems and components - Cylinders - Nominal pressures |
| BS ISO 3338-1-1998 |
銑刀的圓柱狀柄.圓柱直柄的尺寸特性 |
Cylindrical shanks for milling cutters - Dimensional characteristics of plain cylindrical shanks |
| BS ISO 3338-2-1998 |
銑刀的圓柱狀柄.第2部分:平圓柱柄的尺寸特性 |
Cylindrical shanks for milling cutters - Dimensional characteristics of flatted cylindrical shanks |
| BS ISO 3341-2000 |
紡織玻璃纖維.紗線.斷裂力和斷裂伸長的測定 |
Textile glass - Yarns - Determination of breaking force and breaking elongation |
| BS ISO 3342-1995 |
紡織玻璃纖維.織物.抗拉強度的測定 |
Textile glass - Mats - Determination of tensile breaking force |
| BS ISO 3366-2003 |
砂布.卷狀砂布 |
(Coated abrasives - Abrasive rolls) |
| BS ISO 3374-2000 |
增強產品.墊子和織物.單位面積質量的測定 |
Reinforcement products - Mats and fabrics - Determination of mass per unit area |
| BS ISO 3384-2000 |
硫化或熱塑橡膠.在環境溫度和高溫壓縮時應力松馳的測定 |
Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures |
| BS ISO 34-1-2004 |
硫化或熱塑性橡膠.撕裂強度的測定.褲形、直角形和新月形試片 |
|
| BS ISO 3434-2004 |
造船及海上結構物.船舶矩形窗用加熱玻璃板 |
|
| BS ISO 3438-2004 |
攻絲前先鉆孔的莫氏錐柄階梯麻花鉆 |
|
| BS ISO 3439-2003 |
攻絲前先鉆孔的柱柄階梯麻花鉆 |
(Subland twist drills with cylindrical shanks for holes prior to tapping screw threads) |
| BS ISO 35-2004 |
濃縮天然膠乳.機械穩定性的測定 |
|
| BS ISO 3507-1999 |
試驗室玻璃器皿.比重瓶 |
Laboratory glassware - Pyknometers |
| BS ISO 3534-1-1993 |
統計學.詞匯和符號.概率和通用統計術語 |
Statistics - Vocabulary and symbols - Probability and general statistical terms |
| BS ISO 3534-2-1993 |
統計學.詞匯和符號: 統計質量控制 |
Statistics - Vocabulary and symbols - Statistical quality control |
| BS ISO 3534-3-2000 |
統計學.詞匯和符號.實驗設計 |
Statistics - Vocabulary and symbols - Design of experiments |
| BS ISO 3547-1-2000 |
滑動軸承.外襯套.尺寸 |
Plain bearings - Wrapped bushes - Dimensions |
| BS ISO 3547-2-2000 |
滑動軸承.外襯套.外徑和內徑試驗數據 |
Plain bearings - Wrapped bushes - Test data for outside and inside diameter |
| BS ISO 3547-3-2000 |
滑動軸承.外襯套.潤滑孔、潤滑溝和潤滑凹槽 |
Plain bearings - Wrapped bushes - Lubrication holes, lubrication grooves and lubrication indentations |
| BS ISO 3547-4-2000 |
滑動軸承.外襯套.材料 |
Plain bearings - Wrapped bushes - Materials |
| BS ISO 3548-2000 |
滑動軸承.帶或不帶法蘭的薄壁軸瓦.公差、設計特點和試驗方法 |
Plain bearings - Thin-walled half bearings with or without flange - Tolerances, design features and methods of test |
| BS ISO 3553-2-1997 |
道路車輛.點火線圈和配電器的高壓連接.第2部分:插頭型 |
Road vehicles - High tension connectors for ignition coils and distributors - Plug types |
| BS ISO 356-2000 |
香精油.試樣的制備 |
Essential oils - Preparation of test samples |
| BS ISO 3575-2005 |
商品級和沖壓級連續熱鍍鋅碳素鋼薄板 |
|
| BS ISO 3585-1998 |
3.3硼硅酸鹽玻璃.特性 |
Borosilicate glass 3.3. Properties |
| BS ISO 359-1995 |
電影技術.在16mm電影拷貝上可放映的影象區.尺寸和位置 |
Cinematography - Projectable image area on 16 mm motion-picture prints - Dimensions and location |
| BS ISO 3597-1-2003 |
紡織玻璃纖維增強塑料.無捻粗紗增強樹脂棒力學性能的測定.棒的一般考慮和制備 |
(Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - General considerations and preparation of rods) |
| BS ISO 3597-2-2003 |
紡織玻璃纖維增強塑料.無捻粗紗增強樹脂棒力學性能的測定.彎曲強度的測定 |
(Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Determination of flexural strength) |
| BS ISO 3597-3-2003 |
紡織玻璃纖維增強塑料.無捻粗紗增強樹脂棒力學性能的測定.壓縮強度的測定 |
(Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Determination of compressive strength) |
| BS ISO 3597-4-2003 |
紡織玻璃纖維增強塑料.無捻粗紗增強樹脂棒力學性能的測定.表觀層間剪切強度的測定 |
(Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Determination of apparent interlaminar shear strength) |
| BS ISO 36-2000 |
硫化或熱塑橡膠.紡織品附著力的測定 |
Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabric |
| BS ISO 3616-2001 |
紡織玻璃纖維.短切原絲和連續長絲織毯.平均厚度,加載厚度和壓縮回復厚度的測定 |
Textile glass - Chopped-strand and continuous-filament mats - Determination of average thickness, thickness under load and recovery after compression |
| BS ISO 3617-1995 |
攝影技術.處理相片用化學品.氫氧化鈉規范 |
Photography - Processing chemicals - Specifications for sodium hydroxide |
| BS ISO 3618-1995 |
攝影技術.處理相片用化學品.苯并三唑規范 |
Photography - Processing chemicals - Specifications for benzotriazole |
| BS ISO 3619-1995 |
攝影技術.處理相片用化學藥品.硫酸銨溶液規范 |
Photography - Processing chemicals - Specification for ammonium thiosulfate solution |
| BS ISO 362-1998 |
聲學.加速道路車輛的噪音測量.工程測量法 |
Acoustics - Measurement of noise emitted by accelerating road vehicles - Engineering method |
| BS ISO 3620-1995 |
攝影技術.處理相片用化學藥品.處理相片用十二水硫酸鋁鉀規范 |
Photography - Processing chemicals - Specifications for aluminium potassium sulfate |
| BS ISO 3621-1995 |
攝影技術.處理相片用化學藥品.十水四硼酸鈉規范 |
Photography - Processing chemicals - Specifications for sodium tetraborate decahydrate |
| BS ISO 3622-1997 |
攝影術.加工照片用化學藥品.硫氰酸銨規范 |
Photography - Processing chemicals - Specifications for ammonium thiocyanate |
| BS ISO 3623-1995 |
攝影技術.處理相片用化學藥品.照相級含水碳酸鉀規范 |
Photography - Processing chemicals - Specifications for anhydrous potassium carbonate |
| BS ISO 3624-1995 |
攝影技術.處理相片用化學藥品.鐵氰化鉀規范 |
Photography - Processing chemicals - Specifications for potassium ferricyanide |
| BS ISO 3625-1995 |
攝影技術.處理相片用化學藥品.氫氧化鉀規范 |
Photography - Processing chemicals - Specifications for potassium hydroxide |
| BS ISO 3626-1997 |
攝影術.加工照片用化學藥品.硫氰酸鉀規范 |
Photography - Processing chemicals - Specification for potassium thiocyanate |
| BS ISO 3627-2002 |
攝影.沖洗用化學品.無水焦亞硫酸鉀規范 |
Photography - Processing chemicals - Specifications for anhydrous sodium metabisulfite |
| BS ISO 3628-1995 |
攝影技術.處理相片用化學藥品.粒狀硼酸用規范 |
Photography - Processing chemicals - Specifications for boric acid, granular |
| BS ISO 3629-2002 |
照相.處理藥液.偏亞硫酸氫鉀規范 |
Photography - Processing chemicals - Specifications for potassium metabisulfite |
| BS ISO 363-1993 |
紡織機械和附件.閉口環式鋼片綜的尺寸 |
Textile machinery and accessories - Flat steel healds with closed end loops - Dimensions |
| BS ISO 3639-1996 |
電影技術.8mmS型電影膠片用的直徑75-312mm的電影放映片盤/防光片盤.尺寸和規范 |
Cinematography - Projection reels/spools 75 to 312 mm diameter for 8 mm Type S motion-picture film - Dimensions and specifications |
| BS ISO 3645-1996 |
電影技術.8mmS型電影攝影機片窗在膠片上所形成的影象區和可放映的最大影象區.位置和尺寸 |
Cinematography - Image area produced by 8 mm Type S motion-picture camera aperture and maximum projectable image area - Positions and dimensions |
| BS ISO 3657-2002 |
動植物脂肪和油.皂化值的測定 |
Animal and vegetable fats and oils - Determination of saponification value |
| BS ISO 366-4-1994 |
紡織機械和附件.鋼筘.塑料連接金屬鋼筘.尺寸和名稱與符號 |
Textile machinery and accessories - Reeds - Plastic bound metal reeds - Dimensions and designation |
| BS ISO 3664-2000 |
圖形技術和攝影的觀看條件 |
Viewing conditions for graphic technology and photography |
| BS ISO 3665-1997 |
攝影技術.牙科用射線照相膠片.規范 |
Photography - Intra-oral dental radiographic film - Specification |
| BS ISO 3672-1-2000 |
塑料.未飽和的聚酯樹脂(UP-R).名稱與符號體系 |
Plastics. Unsaturated-polyester resins (UP-R). Designation system |
| BS ISO 3672-2-2000 |
塑料.未飽和的聚酯樹脂(UP-R).試樣制備和性能測定 |
Plastics. Unsaturated-polyester resins (UP-R). Preparation of test specimens and determination of properties |
| BS ISO 368-1993 |
準備紡紗機、紡紗機和并線(捻線)機.環錠紡紗、并線用筒管 |
Spinning preparatory, spinning and doubling (twisting) machinery - Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64 |
| BS ISO 3686-1-2000 |
帶垂直軸固定高度工作臺的高準確度六角和單軸坐標鉆床和鏜床的試驗條件.準確度的試驗.單柱式機床 |
Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle - Testing of the accuracy - Single column type machines |
| BS ISO 3686-2-2000 |
帶垂直軸固定高度工作臺的高準確度六角和單軸坐標鉆床和鏜床的試驗條件.準確度的試驗.帶移動工作臺的移動式機床 |
Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle - Testing of the accuracy - Portal type machines with moving table |
| BS ISO 3688-2000 |
紙漿.藍光漫反射因數(ISO 亮度)的測量用實驗室用板的制備 |
Pulps - Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness) |
| BS ISO 3715-2-2001 |
船舶和海運技術.船舶的推進裝置.可控制船向傾角的推進裝置的詞匯 |
Ships and marine technology - Propulsion plants for ships - Vocabulary for controllable-pitch propeller plants |
| BS ISO 3723-1996 |
液壓傳動.濾芯件.端向負荷試驗方法 |
Hydraulic fluid power - Filter elements - Method for end load test |
| BS ISO 3724-1996 |
液壓傳動.濾芯件.流動疲勞特性的驗證 |
Hydraulic fluid power - Filter elements - Verification of flow fatigue characteristics |
| BS ISO 3728-2004 |
冰淇淋和牛乳凍.總固形物含量的測定(參照法) |
|
| BS ISO 3764-2001 |
計時儀表.運動.形狀、尺寸和名稱 |
Timekeeping instruments - Movements - Forms, dimensions and nomenclature |
| BS ISO 3767-1-2000 |
拖拉機、農林機械、動力草坪和園藝設備.操作者控制符號和其它顯示符號.通用符號(檢查) |
(Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Common symbols (review)) |
| BS ISO 3767-2-1993 |
拖拉機、農林機械、動力草坪和園藝設備.操作者控制符號和其他顯示符號.農業拖拉機和機械的符號 |
(Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Symbols for agricultural tractors and machinery) |
| BS ISO 3767-3-1996 |
拖拉機、農林機械、動力草坪和園藝設備.操作者控制符號和其它顯示符號.動力草坪和園藝設備用符號 |
(Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Symbols for powered lawn and garden equipment) |
| BS ISO 3767-4-1995 |
拖拉機、農林機械、動力草坪和園藝設備.操作者控制符號和其他顯示符號.林業機械的符號 |
(Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Symbols for forestry machinery) |
| BS ISO 3767-5-1996 |
拖拉機、農林機械、動力草坪和園藝設備.操縱者控制符號和其它顯示符號.手動便攜式林業機械符號 |
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Symbols for manual portable forestry machinery |
| BS ISO 3772-2001 |
攝影技術.預壓工業用敏感材料膠片.尺寸和有關要求 |
Photography - Rolls of sensitized material for the pre-press industry - Dimensions and related requirements |
| BS ISO 3773-1996 |
電影技術.供電影放映機的8mmS型電影膠片的粘接片.尺寸 |
Cinematography - Tape splices for 8 mm Type S motion-picture film for projector use - Dimensions |
| BS ISO 3774-1996 |
電影技術.穿孔的8mmS(1-3-5-7-0)和(1-0)型的35mm電影膠片.剪切和穿孔尺寸 |
Cinematography - 35 mm motion-picture film perforated 8 mm Type S (1-3-5-7-0) and (1-0) - Cutting and perforating dimensions |
| BS ISO 3775-1996 |
電影技術.在穿孔的8mm S(1-3)型的16mm電影膠片上的8mm,S型拷貝影象區.位置和尺寸 |
Cinematography - Printed 8 mm Type S image area on 16 mm motion-picture film perforated 8 mm Type S (1-3) - Position and dimensions |
| BS ISO 3793-2001 |
香精油.在吡啶中乙�；ü蓝ㄓ坞x伯醇和游離仲醇含量 |
Essential oils - Estimation of primary and secondary free alcohols content by acetylation in pyridine |
| BS ISO 3794-2001 |
香精油(包括叔醇).用乙�；鬁y定酯化值法估定游離醇含量 |
Essential oils (containing tertiary alcohols) - Estimation of free alcohols content by determination of ester value after acetylation |
| BS ISO 3796-2000 |
船和造船技術.外開單扇門凈開口 |
Ships and marine technology. Clear openings for external single-leaf doors |
| BS ISO 3808-2003 |
道路車輛.無屏蔽高電壓點火電纜.總規范、試驗方法和要求 |
(Road vehicles - Unscreened high-voltage ignition cables - General specifications, test methods and requirements) |
| BS ISO 3809-2004 |
用機械法制取的墨西哥酸橙油 |
|
| BS ISO 3809-2004 |
用機械法獲得的墨西哥酸橙油 |
|
| BS ISO 3849-2003 |
錫蘭香茅油 |
(Oil of citronella, Sri Lanka type [Cymbopogon nardus (L.) W. Watson var. lenabatu Stapf.]) |
| BS ISO 3858-2004 |
橡膠配合劑.炭黑.甲苯萃取液透光率的測定 |
|
| BS ISO 3865-1998 |
硫化或熱塑橡膠.與有機材料接觸污染的試驗方法 |
Rubber, vulcanized or thermoplastic - Methods of test for staining in contact with organic material |
| BS ISO 3865-2005 |
硫化或熱塑性橡膠.接觸有機材料時污染的試驗方法 |
|
| BS ISO 3867-2001 |
合成材料的瓶塞.膨脹連接填料.試驗方法 |
Composition cork - Expansion joint fillers - Test methods |
| BS ISO 3869-2001 |
合成材料的瓶塞.膨脹連接填料.規范、包裝和標記 |
Composition cork - Expansion joint fillers - Specifications, packaging and marking |
| BS ISO 3874-1998 |
貨運集裝箱系列1.搬運和固定 |
Series 1 freight containers - Handling and securing |
| BS ISO 3875-2004 |
機械工具.外圓無心磨床的試驗條件.精度檢驗 |
|
| BS ISO 3888-1-1999 |
客車.車道急劇改變操縱用試驗車道.第1部分:兩車道變換 |
Passenger cars - Test track for a severe lane-change manoeuvre - Double-lane change |
| BS ISO 3888-2-2003 |
乘用車.車道急劇改變操縱用試驗車道.故障清除 |
Passenger cars - Test track for a severe lane-change manoeuvre - Obstacle avoidance |
| BS ISO 389-3-1995 |
聲學.音響設備校正標準零點.第3部分:純音和骨傳導振動器用標準相等插入力級別 |
Acoustics. Reference zero for the calibration of audiometric equipment. Reference equivalent threshold force levels for pure tones and bone vibrators |
| BS ISO 3890-1-2000 |
牛奶和牛奶制品.氯有機化合物(農藥)殘留物的測定.一般問題和萃取方法 |
Milk and milk products - Determination of residues of organochlorine compounds (pesticides) - General considerations and extraction methods |
| BS ISO 3890-2-2000 |
牛奶和牛奶制品.氯有機化合物(農藥)殘留物的測定.原油萃取提純和確認的試驗方法 |
Milk and milk products - Determination of residues of organochlorine compounds (pesticides) - Test methods for crude extract purification and confirmation |
| BS ISO 3901-2001 |
信息和文獻工作.國際標準記錄代碼(ISRC) |
Information and documentation - International Standard Recording Code (ISRC) |
| BS ISO 3918-1997 |
擠奶裝置詞匯 |
Milking machine installations - Vocabulary |
| BS ISO 3928-1999 |
不包括硬質合金的燒結金屬材料.疲勞試件 |
Sintered metal materials, excluding hardmetals - Fatigue test pieces |
| BS ISO 3929-2003 |
道路車輛.在檢驗或維修過程中廢氣排放量的測量方法 |
(Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance) |
| BS ISO 3943-1995 |
攝影技術.處理相片用化學藥品.無水乙酸鈉規范 |
Photography - Processing chemicals - Specifications for anhydrous sodium acetate |
| BS ISO 3968-2002 |
液力傳動.過濾器.差壓與流量特性關系的評估 |
Hydraulic fluid power - Filters - Evaluation of differential pressure versus flow characteristics |
| BS ISO 3977-1-2004 |
燃氣輪機.采購.序言和定義 |
|
| BS ISO 3977-2-2004 |
燃氣輪機.采購.額定基準條件和特性 |
|
| BS ISO 3977-4-2002 |
燃氣輪機.采購.燃油和環境 |
Gas turbines - Procurement - Fuels and environment |
| BS ISO 3977-5-2002 |
燃氣輪機.采購.石油和天然氣工業的應用 |
Gas turbines - Procurement - Applications for petroleum and natural gas industries |
| BS ISO 3977-7-2002 |
燃氣輪機.采購.技術信息 |
Gas turbines - Procurement - Technical information |
| BS ISO 3977-8-2002 |
燃氣輪機.采購.檢驗、測試、安裝和交付使用 |
Gas turbines - Procurement - Inspection, testing, installation and commissioning |
| BS ISO 3977-9-2004 |
燃氣輪機.采購.可靠性、有效性、維修性和安全性 |
|
| BS ISO 3984-2005 |
道路車輛.后部移動障礙壁沖擊試驗過程 |
|
| BS ISO 4008-3-2003 |
道路車輛.噴油泵試驗.應用和試驗程序 |
(Road vehicles - Fuel injection pump testing - Application and test procedures) |
| BS ISO 4010-1998 |
柴油發動機.針栓型滯后標定噴嘴 |
Diesel engines - Calibrating nozzle, delay pintle type |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com