標準號 |
中文名稱 |
英文名稱 |
| DIN EN ISO 2870-1994 |
表面活性劑.洗滌劑.酸性條件下可水解的和不可水解的陰離子活性物質的測定 |
Surface active agents - Detergents - Determination of anionic-active matter hydrolyzable and non-hydrolyzable under acid conditions (ISO 2870:1986); German version EN ISO 2870:1994 |
| DIN EN ISO 2871-1-1994 |
表面活性劑.洗滌劑-陽離子活性物質含量的測定.第1部分:高分子量陽極活性物質 |
Surface active agents - Detergents - Determination of cationic-active matter content; Part 1: High-molecular-mass cationic-active matter (ISO 2871-1-1988); German version EN ISO 2871-1:1994 |
| DIN EN ISO 2871-2-1994 |
表面活性劑.洗滌劑,陽離子活性物含量測定.第2部分:低分子團(200-500)的陽離子活性物質 |
Surface active agents - Detergents - Determination of cationic-active matter content; Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:1990); German version EN ISO 2871-1:1994 |
| DIN EN ISO 2873-2002 |
包裝.滿裝的運輸包裝及成組裝運.低壓試驗 |
Packaging - Complete, filled transport packages and unit loads - Low pressure test (ISO 2873:2000); German version EN ISO 2873:2002 |
| DIN EN ISO 2875-2003 |
包裝.完整滿裝運輸包裝件和成組裝運.噴水試驗 |
Packaging - Complete, filled transport packages and unit loads - Water-spray test (ISO 2875:2000); German version EN ISO 2875:2002 |
| DIN EN ISO 2897-1-1999 |
塑料.耐沖擊聚苯乙烯模塑和擠塑材料.第1部分:命名與基礎規范 |
Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2897-1:1997); German version EN ISO 2897-1:1999 |
| DIN EN ISO 2897-2-1999 |
塑料.耐沖擊聚苯乙烯模塑和擠塑材料.第2部分:試樣制備與基礎規范 |
Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2897-2:1994, including Technical Corrigendum 1:1995); German version EN ISO 2897-2:1999 |
| DIN EN ISO 2897-2-2004 |
塑料.耐沖擊聚苯乙烯(PS-I)模塑和擠塑材料.第2部分:試樣制備和性能測定 |
|
| DIN EN ISO 2898-1-1999 |
塑料.增塑聚氯乙烯(PVC-P)模塑與注塑材料.第1部分:命名與基礎規范 |
Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2898-1:1996); German version EN ISO 2898-1:1999 |
| DIN EN ISO 2898-2-1999 |
塑料.增塑聚氯乙烯(PVC-P)模塑與注塑材料.第2部分:試樣制備與特性測定 |
Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2898-2:1997); German version EN ISO 2898-2:1999 |
| DIN EN ISO 291-1997 |
塑料.調節和檢驗用的標準大氣壓 |
Plastics - Standard atmospheres for conditioning and testing (ISO 291:1997); German version EN ISO 291:1997 |
| DIN EN ISO 2922-2001 |
聲學.內河航道和港灣船舶發出的氣載噪聲的測量 |
Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours (ISO 2922:2000); German version EN ISO 2922:2000 |
| DIN EN ISO 293-2003 |
塑料.熱塑性材料的壓塑試樣 |
(Plastics - Compression moulding test specimens of thermoplastic materials (ISO 293:1986); German version EN ISO 293:2003) |
| DIN EN ISO 293-2005 |
塑料.熱塑性材料試樣的壓模鑄造 |
|
| DIN EN ISO 294-1-1998 |
塑料.熱塑材料試樣的注塑.第1部分:一般原理和多用途試樣及棒的制造 |
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:1996); German version EN ISO 294-1:1998 |
| DIN EN ISO 294-2-1998 |
塑料.熱塑材料試樣的注塑.第2部分:小拉伸棒 |
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996); German version EN ISO 294-2:1998 |
| DIN EN ISO 294-3-1998 |
塑料.熱塑材料試樣的注塑.第3部分:小板 |
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:1996); German version EN ISO 294-3:1998 |
| DIN EN ISO 294-4-1998 |
塑料.熱塑材料試樣的注塑.第4部分:模塑收縮的測定 |
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:1997); German version EN ISO 294-4:1998 |
| DIN EN ISO 294-4-2003 |
塑料.熱塑材料試樣的注塑法.第4部分:模塑收縮率的測定 |
(Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2001); German version EN ISO 294-4:2003) |
| DIN EN ISO 295-1998 |
塑料.熱固性材料制試樣的壓塑 |
Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:1991); German version EN ISO 295:1998 |
| DIN EN ISO 295-2004 |
塑料.熱固性材料試樣的壓模塑法 |
|
| DIN EN ISO 3001-1999 |
塑料.環氧化合物.環氧基當量的測定 |
Plastics - Epoxide compounds - Determination of epoxide equivalent (ISO 3001:1999); German version EN ISO 3001:1999 |
| DIN EN ISO 3037-1996 |
瓦楞纖維板.邊緣耐壓碎性的測定(不涂蠟邊法) |
Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:1994); German version EN ISO 3037:1995 |
| DIN EN ISO 305-1999 |
塑料.聚氯乙烯和有關含聚合物和共聚物及其混合物的熱穩定性的測定.色變法 |
Plastics - Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds - Discoloration method (ISO 305:1990); German version EN ISO 305:1999 |
| DIN EN ISO 3059-2002 |
無損檢驗.滲透法檢驗和磁粉檢驗.觀察條件 |
Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions (ISO 3059:2001); German version EN ISO 3059:2001 |
| DIN EN ISO 306-1997 |
塑料.熱塑塑料.維卡(VICAT)軟化溫度的測定(VST) |
Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:1994); German version EN ISO 306:1996 |
| DIN EN ISO 306-2004 |
塑料.熱塑性材料.維卡特(VICAT)軟化溫度的測定(VST) |
|
| DIN EN ISO 307-1998 |
塑料.聚酰胺.粘度值的測定 |
Plastics - Polyamides - Determination of viscosity number (ISO 307:1994); German version EN ISO 307:1997 |
| DIN EN ISO 308-1998 |
塑料.酚醛樹脂模塑材料.丙酮可溶成份的測定(未加工狀態下模塑材料的表面樹脂含量) |
Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) (ISO 308:1994); German version EN ISO 308:1997 |
| DIN EN ISO 3095-2005 |
鐵路設施.聲學.有軌車輛發出噪聲的測量 |
|
| DIN EN ISO 3098 Bb.1-2001 |
技術制圖.字體.字體A用繪圖格子 |
Technical drawings - Lettering - Drafting grids for lettering A |
| DIN EN ISO 3098 Bb.2-2001 |
技術制圖.字體.字體B用繪圖格子 |
Technical drawings - Lettering - Drafting grids for lettering B |
| DIN EN ISO 3098-0-1998 |
技術產品文獻.字體.第0部分:一般要求 |
Technical product documentation - Lettering - Part 0: General requirements (ISO 3098-0:1997); German version EN ISO 3098-0:1997 |
| DIN EN ISO 3098-2-2000 |
技術產品文獻.字體.第2部分:拉丁字母、數字和標記 |
Technical product documentation - Lettering - Part 2: Latin alphabet, numerals and marks (ISO 3098-2:2000); German version EN ISO 3098-2:2000 |
| DIN EN ISO 3098-3-2000 |
技術產品文獻.字體.第3部分:希臘字母 |
Technical product documentation - Lettering - Part 3: Greek alphabet (ISO 3098-3:2000); German version EN ISO 3098-3:2000 |
| DIN EN ISO 3098-4-2000 |
技術產品文獻.文字書寫.第4部分:拉丁字母的區分標志和特殊標志 |
Technical product documentation - Lettering - Part 4: Diacritical and particular marks for the Latin alphabet (ISO 3098-4:2000); German version EN ISO 3098-4:2000 |
| DIN EN ISO 3098-5-1998 |
技術產品文獻.字體.第5部分:拉丁字母,數字和標志的CAD字體 |
Technical product documentation - Lettering - Part 5: CAD-Lettering of the Latin alphabet, numerals and marks (ISO 3098-5:1997); German version EN ISO 3098-5:1997 |
| DIN EN ISO 3098-6-2000 |
技術產品文獻.字體.第6部分:西里爾字母 |
Technical product documentation - Lettering - Part 6: Cyrillic alphabet (ISO 3098-6:2000); German version EN ISO 3098-6:2000 |
| DIN EN ISO 3104-1999 |
石油產品.透明和不透明液體.運動粘度的測定和動力粘度的計算 |
Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994 + Cor. 1:1997); German version EN ISO 3104:1996 + AC:1999 |
| DIN EN ISO 3107-2005 |
牙醫學.鋅氧化物/丁香酸和鋅氧化物/非丁香酸粘固粉 |
|
| DIN EN ISO 3126-2005 |
塑料管道系統.塑料部件.尺寸測定 |
|
| DIN EN ISO 3126-2005 |
塑料管道系統.塑料部件.尺寸測定 |
|
| DIN EN ISO 3146 Berichtigung 1-2003 |
DIN EN ISO 3146-2002的勘誤 |
Corrigenda to DIN EN ISO 3146:2002-06 (EN ISO 3146:2000/AC:2002) |
| DIN EN ISO 3146-2002 |
塑料.毛細管和偏振光顯微鏡法測定半晶狀聚合物的熔化性能(熔化溫度或熔化區域) |
Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2000); German version EN ISO 3146:2000 |
| DIN EN ISO 3164-1999 |
土方機械.保護結構的實驗室評定.極限偏差容量規范 |
Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume (ISO 3164:1995); German version EN ISO 3164:1999 |
| DIN EN ISO 3166-1-1998 |
國家和他們的地區名的表示代碼.第1部分:地區代碼 |
Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:1997); German version EN ISO 3166-1:1997 |
| DIN EN ISO 3167-1997 |
塑料.多用途試樣 |
Plastics - Multipurpose-test specimens (ISO 3167:1993); German version EN ISO 3167:1996 |
| DIN EN ISO 3170-1999 |
液態石油.人工取樣(ISO 3170:1988 含修改件1:1998) |
Petroleum liquids - Manual sampling (ISO 3170:1988, including Amendment 1:1998); German version EN ISO 3170:1998 |
| DIN EN ISO 3170-2004 |
石油液體.人工采樣 |
|
| DIN EN ISO 3171-2000 |
石油液態產品.管道自動取樣 |
Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988); German version EN ISO 3171:1999 |
| DIN EN ISO 3175-1-1998 |
紡織物.干洗和最終處理.第1部分:紡織物和衣物清洗合格評定 |
Textiles - Dry cleaning and finishing - Part 1: Method for assessing the cleanability of textiles and garments (ISO 3175-1:1998); German version EN ISO 3175-1:1998 |
| DIN EN ISO 3175-2-1998 |
紡織物.干洗和最終處理.第2部分:四氯乙烷法 |
Textiles - Dry cleaning and finishing - Part 2: Procedures for tetrachloroethene (ISO 3175-2:1998); German version EN ISO 3175-2:1998 |
| DIN EN ISO 3175-3-2004 |
紡織品.織物和服裝的專業護理、干洗和濕洗.第3部分:用烴溶劑清潔和整理時的性能測試程序 |
(Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 3: Procedure for testing performance when cleaning and finishing using hydrocarbon solvents (ISO 3175-3:2003); German version of EN ISO 3175-3:2003) |
| DIN EN ISO 3175-3-2004 |
紡織品.織物和服裝的專業護理、干洗和濕洗.第3部分:用烴溶劑清潔和整理時的性能測試程序 |
|
| DIN EN ISO 3175-4-2004 |
紡織品.織物和服裝的專業護理、干洗和濕洗.第4部分:用模擬濕洗清潔和整理時的性能測試程序 |
(Textiles - Professional care, drycleaning and wetcleaning of textiles - Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning (ISO 3175-4:2003); German version EN ISO 3175-4:2003) |
| DIN EN ISO 3175-4-2004 |
紡織品.織物和服裝的專業護理、干洗和濕洗.第4部分:用模擬濕洗清潔和整理時的性能測試程序 |
|
| DIN EN ISO 3188-1994 |
淀粉及其制品.用克耶達(Kjeldahl)法測定含氮量.滴定法 |
Starches and derived products - Determination of nitrogen content by the Kjeldahl method - Titrimetric method (ISO 3188:1978); German version EN ISO 3188:1994 |
| DIN EN ISO 3219-1994 |
塑料.液態或起乳液或分散劑作用的聚合物/樹脂.使用規定剪切率的旋轉式粘度計測定粘度 |
Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993); German version EN ISO 3219:1994 |
| DIN EN ISO 3231-1998 |
色漆和清漆.對含二氧化硫潮濕空氣的耐抗性的測定 |
Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide (ISO 3231:1993); German version EN ISO 3231:1997 |
| DIN EN ISO 3248-2000 |
涂料和清漆.熱效應的測定 |
Paints and varnishes - Determination of the effect of heat (ISO 3248:1998); German version EN ISO 3248:2000 |
| DIN EN ISO 3251-1995 |
色漆和清漆.色漆、清漆和色漆-清漆粘合劑中非揮發物質的測定 |
Paint and varnishes - Determination of the non-volatile matter of paints, varnishes and binders for paints and varnishes (ISO 3251:1993); German version EN ISO 3251:1995 |
| DIN EN ISO 3251-2003 |
色漆、清漆和塑料.非揮發物質含量的測定 |
(Paints, varnishes and plastics - Determination of non-volatile matter content (ISO 3251:2003); German version EN ISO 3251:2003) |
| DIN EN ISO 3252-2001 |
粉末冶金.詞匯 |
Powder metallurgy - Vocabulary (ISO 3252:1999); German version EN ISO 3252:2000 |
| DIN EN ISO 3262-1-1998 |
涂料用填充劑.要求和檢驗方法.第1部分:導言和一般檢驗方法 |
Extenders for paints - Specifications and methods of test - Part 1: Introduction and general test methods (ISO 3262-1:1997); German version EN ISO 3262-1:1998 |
| DIN EN ISO 3262-10-2001 |
涂料用填充劑.規范和試驗方法.第10部分:片狀天然滑石/亞氯酸鹽 |
Extenders for paints - Specifications and methods of test - Part 10: Natural talc/chlorite in lamellar form (ISO 3262-10:2000); German version EN ISO 3262-10:2000 |
| DIN EN ISO 3262-11-2001 |
涂料用填充劑.規范和試驗方法.第11部分:含碳酸鹽的片狀天然滑石 |
Extenders for paints - Specifications and methods of test - Part 11: Natural talc, in lamellar form, containing carbonates (ISO 3262-11:2000); German version EN ISO 3262-11:2000 |
| DIN EN ISO 3262-12-2002 |
涂料用填充劑.規范和試驗方法.第12部分:白云母類云母 |
Extenders for paints - Specifications and methods of test - Part 12: Muscovite-type mica (ISO 3262-12:2001); German version EN ISO 3262-12:2001 |
| DIN EN ISO 3262-13-1998 |
涂料用填充料.要求和檢驗方法.第13部分:天然石英(已磨碎) |
Extenders for paints - Specifications and methods of test - Part 13: Natural quartz (ground) (ISO 3262-13:1997); German version EN ISO 3262-13:1998 |
| DIN EN ISO 3262-14-2000 |
涂料用填充劑.試驗規范和試驗方法.第14部分:白硅石 |
Extenders for paints - Specifications and methods of test - Part 14: Cristobalite (ISO 3262-14:2000); German version EN ISO 3262-14:2000 |
| DIN EN ISO 3262-15-2000 |
涂料用填充劑.試驗規范和試驗方法.第15部分:石英玻璃 |
Extenders for paints - Specifications and methods of test - Part 15: Vitreous silica (ISO 3262-15:2000); German version EN ISO 3262-15:2000 |
| DIN EN ISO 3262-16-2000 |
涂料用填充劑.規范和試驗方法.第16部分:氫氧化鋁 |
Extenders for paints - Specifications and methods of test - Part 16: Aluminium hydroxides (ISO 3262-16:2000); German version EN ISO 3262-16:2000 |
| DIN EN ISO 3262-17-2000 |
涂料用填充劑.規范和試驗方法.第17部分:沉淀硅酸鈣 |
Extenders for paints - Specifications and methods of test - Part 17: Precipitated calcium silicate (ISO 3262-17:2000); German version EN ISO 3262-17:2000 |
| DIN EN ISO 3262-18-2000 |
涂料用填充劑.規范和試驗方法.第18部分:沉淀硅鋁酸鈉 |
Extenders for paints - Specifications and methods of test - Part 18: Precipitated sodium aluminium silicate (ISO 3262-18:2000); German version EN ISO 3262-18:2000 |
| DIN EN ISO 3262-19-2000 |
涂料用填充劑.規范和試驗方法.第19部分:沉淀石英 |
Extenders for paints - Specifications and methods of test - Part 19: Precipitated silica (ISO 3262-19:2000); German version EN ISO 3262-19:2000 |
| DIN EN ISO 3262-2-1998 |
涂料用填料.要求和檢驗方法.第2部分:重晶石(天然硫酸鋇) |
Extenders for paints - Specifications and methods of test - Part 2: Barytes (natural barium sulfate) (ISO 3262-2:1998); German version EN ISO 3262-2:1998 |
| DIN EN ISO 3262-2-1998 |
涂料用填料.要求和檢驗方法.第2部分:重晶石(天然硫酸鋇) |
Extenders for paints - Specifications and methods of test - Part 2: Barytes (natural barium sulfate) (ISO 3262-2:1998); German version EN ISO 3262-2:1998 |
| DIN EN ISO 3262-20-2000 |
涂料用填充劑.規范和試驗方法.第20部分:煙化石英 |
Extenders for paints - Specifications and methods of test - Part 20: Fumed silica (ISO 3262-20:2000); German version EN ISO 3262-20:2000 |
| DIN EN ISO 3262-21-2000 |
涂料用填充劑.規范和試驗方法.第21部分:石英砂(地下天然石英) |
Extenders for paints - Specifications and methods of test - Part 21: Silica sand (unground natural quartz) (ISO 3262-21:2000); German version EN ISO 3262-21:2000 |
| DIN EN ISO 3262-22-2002 |
涂料用填充劑.規范和試驗方法.第22部分:熱堿處理的硅藻土 |
Extenders for paints - Specifications and methods of test - Part 22: Flux-calcined Kieselguhr (ISO 3262:2001); German version EN ISO 3262-22:2001 |
| DIN EN ISO 3262-4-1998 |
涂料用填料.要求和檢驗方法.第4部分:粉化 |
Extenders for paints - Specifications and methods of test - Part 4: Whiting (ISO 3262-4:1998); German version EN ISO 3262-4:1998 |
| DIN EN ISO 3262-5-1998 |
涂料用填料.要求和檢驗方法.第5部分:天然結晶碳酸鈣 |
Extenders for paints - Specifications and methods of test - Part 5: Natural crystalline calcium carbonate (ISO 3262-5:1998); German version EN ISO 3262-5:1998 |
| DIN EN ISO 3262-6-1998 |
涂料用填料.要求和檢驗方法.第6部分:沉淀的碳酸鈣 |
Extenders for paints - Specifications and methods of test - Part 6: Precipitated calcium carbonate (ISO 3262-6:1998); German version EN ISO 3262-6:1998 |
| DIN EN ISO 3262-7-1998 |
涂料用填料.要求和檢驗方法.第7部分:白云石 |
Extenders for paints - Specifications and methods of test - Part 7: Dolomite (ISO 3262-7:1998); German version EN ISO 3262-7:1998 |
| DIN EN ISO 3262-8-1999 |
涂料用填充劑.試驗方法規范.第8部分:天然粘土 |
Extenders for paints - Specifications and methods of test - Part 8: Natural clay (ISO 3262-8:1999); German version EN ISO 3262-8:1999 |
| DIN EN ISO 3262-9-1998 |
涂料用填充料.要求和檢驗方法.第9部分:煅燒的高嶺土 |
Extenders for paints - Specifications and methods of test - Part 9: Calcined clay (ISO 3262-9:1997); German version EN ISO 3262-9:1998 |
| DIN EN ISO 3269-2000 |
緊固件.驗收檢查 |
Fasteners - Acceptance inspection (ISO 3269:2000); German version EN ISO 3269:2000 |
| DIN EN ISO 3274-1998 |
幾何產品規范(GPS).織物表面:輪廓法.接觸尖筆式記錄儀的一般特性 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996); German version EN ISO 3274:1997 |
| DIN EN ISO 3325-2002 |
包括硬性金屬的燒結金屬材料.測定橫向斷裂強度 |
Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength (ISO 3325:1996 + AMD 1:2001) (includes Amendment A1:2002); German version EN ISO 3325:1999 + A1:2002 |
| DIN EN ISO 3336-1996 |
牙科學.合成聚合物牙齒 |
Dentistry - Synthetic polymer teeth (ISO 3336:1993); German version EN ISO 3336:1996 |
| DIN EN ISO 3344-1997 |
增強制品.水份含量的測定 |
Reinforcement products - Determination of moisture content (ISO 3344:1997); German version EN ISO 3344:1997 |
| DIN EN ISO 3381-2005 |
鐵路設施.聲學.有軌車輛內的噪聲測量 |
|
| DIN EN ISO 3382-2000 |
聲學.參考其它聲學參數的房間混響時間的測量 |
Acoustics - Measurement of the reverberation time of rooms with reference to other acoustical parameters (ISO 3382:1997); German version EN ISO 3382:2000 |
| DIN EN ISO 3385-1995 |
軟質泡沫聚合材料.用定載沖擊法測定疲勞 |
Flexible cellular polymeric materials - Determination of fatigue by constant load pounding (ISO 3385:1989); German version EN ISO 3385:1995 |
| DIN EN ISO 3386-1-1998 |
泡沫柔性聚合材料.壓縮應力應變特性的測定.第1部分:低密度材料 |
Polymeric materials, cellular flexible - Determination of stress-strain characteristic in compression - Part 1: Low-density materials (ISO 3386-1:1986); German version EN ISO 3386-1:1997 |
| DIN EN ISO 3386-2-1998 |
泡沫柔性聚合材料.壓縮應力應變特性的測定.第2部分:高密度材料 |
Polymeric materials, cellular flexible - Determination of stress-strain characteristics in compression - Part 2: High-density materials (ISO 3386-2:1997); German version EN ISO 3386-2:1997 |
| DIN EN ISO 3405-2001 |
石油產品.在大氣壓下測定蒸餾特性 |
Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2000); German version EN ISO 3405:2000 |
| DIN EN ISO 3411-1999 |
土方機械.操作者的人體尺寸和操作者最小座艙空間 |
Earth-moving machinery - Human physical dimensions of operators and minimum operator space envelope (ISO 3411:1995); German version EN ISO 3411:1999 |
| DIN EN ISO 3450-1996 |
土方機械.裝橡膠輪胎機械的制動裝置.系統,要求和檢驗 |
Earth-moving machinery - Braking systems of rubber-tyred machines - Systems and performance requirements and test procedures (ISO 3450:1996); German version EN ISO 3450:1996 |
| DIN EN ISO 3451-1-1997 |
塑料.灰份的測定.第1部分:一般方法 |
Plastics - Determination of ash - Part 1: General methods (ISO 3451-1:1997); German version EN ISO 3451-1:1997 |
| DIN EN ISO 3451-4-2001 |
塑料.灰分的測定.第4部分:聚酰胺 |
Plastics - Determination of ash - Part 4: Polyamides (ISO 3451-4:1998); German version EN ISO 3451-4:2000 |
| DIN EN ISO 3451-5-2002 |
塑料.灰分的測定.第5部分:聚氯乙烯 |
Plastics - Determination of ash - Part 5: Poly(vinyl chloride) (ISO 3451-5:2002); German version EN ISO 3451-5:2002 |
| DIN EN ISO 3452-2-2000 |
無損試驗.滲透試驗.第2部分:滲透材料試驗 |
Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2000); German version EN ISO 3452-2:2000 |
| DIN EN ISO 3452-3-1999 |
無損檢驗.滲透檢驗.第3部分:標準試樣 |
Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:1998); German version EN ISO 3452-3:1998 |
| DIN EN ISO 3452-4-1999 |
無損檢驗.滲透檢驗.第4部分:設備 |
Non-destructive testing - Penetrant testing - Part 4: Equipment (ISO 3452-4:1998); German version EN ISO 3452-4:1998 |
| DIN EN ISO 3457-1995 |
土方機械.擋板和護罩.定義和規范 |
Earth moving machinery - Guards and shields - Definitions and specifications (ISO 3457:1986); German version EN ISO 3457:1995 |
| DIN EN ISO 3497-2001 |
金屬鍍層.鍍層厚度的測量.X射線光譜測定法 |
Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods (ISO 3497:2000); German version EN ISO 3497:2000 |
| DIN EN ISO 3506-1-1998 |
不銹鋼制連接件的機械性能.第1部分:螺絲 |
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:1997); German version EN ISO 3506-1:1997 |
| DIN EN ISO 3506-2-1998 |
耐腐蝕不銹鋼緊固件的機械特性.第2部分:螺母 |
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:1997); German version EN ISO 3506-2:1997 |
| DIN EN ISO 3506-3-1998 |
耐腐蝕不銹鋼緊固件的機械特性.第3部分:螺銷和類似的無拉應力的螺絲 |
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:1997); German version EN ISO 3506-3:1997 |
| DIN EN ISO 3521-1999 |
塑料.不飽和聚酯和環氧樹脂.體積的總收縮量的測定 |
Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage (ISO 3521:1997); German version EN ISO 3521:1999 |
| DIN EN ISO 3543-2001 |
金屬和非金屬涂層.厚度測量.β射線反向散射法 |
Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method (ISO 3543:2000); German version EN ISO 3543:2000 |
| DIN EN ISO 3549-2002 |
色漆用鋅粉顏料.規范和試驗方法 |
Zinc dust pigments for paints - Specifications and test methods (ISO 3549:1995); German version EN ISO 3549:2002 |
| DIN EN ISO 3582-2001 |
柔性多孔聚合材料.在小火焰條件下小試樣水平方向燃燒特性的實驗室評定 |
Flexible cellular polymeric materials - Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame (ISO 3582:2000); German version EN ISO 3582:2000 |
| DIN EN ISO 3593-1994 |
淀粉.灰分的測定 |
Starch - Determination of ash (ISO 3593:1981); German version EN ISO 3593:1994 |
| DIN EN ISO 3596-2002 |
動植物脂肪和油.不可皂化物的測定.二已醚萃取法 |
Animal and vegetable fats and oils - Determination of unsaponifiable matter - Method using diethyl ether extraction (ISO 3596:2000); German version EN ISO 3596:2001 |
| DIN EN ISO 3613-2002 |
鋅、鎘、鋁鋅合金和鋅鋁合金的鉻酸鹽轉化鍍層.試驗方法 |
Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods (ISO 3613:2000); German version EN ISO 3613:2001 |
| DIN EN ISO 3630-1-1994 |
牙根管器械.第1部分:銼刀、擴孔器、毛刺鉆孔器、粗銼、軟膏、探測器和棉條鉆孔器 |
Dental root-canal instruments - Part 1: Files, reamers, barbed broaches, rasps, paste carries, explorers and cotton broaches (ISO 3630-1:1992); German version EN ISO 3630-1:1994 |
| DIN EN ISO 3630-2-2001 |
牙根管器械.第2部分:擴管器 |
Dental root-canal instruments - Part 2: Enlargers (ISO 3630-2:2000); German version EN ISO 3630-2:2000 |
| DIN EN ISO 3630-3-1996 |
牙根管器械.第3部分:充盈冷凝器,充盈充填器和充盈分配器 |
Dental root-canal instruments - Part 3: Condensers, pluggers and spreaders (ISO 3630-3:1994); German version EN ISO 3630-3:1996 |
| DIN EN ISO 3650-1999 |
幾何產品規范(GPS).長度標準.塊規 |
Geometrical product specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998); German version EN ISO 3650:1998 |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com