標準號 |
中文名稱 |
英文名稱 |
| EN ISO 8989-1998 |
塑料液態酚醛樹脂水溶物的測定 |
Plastics - Liquid phenolic resins - Determination of water miscibility (ISO 8989:1995) |
| EN ISO 899-1-2003 |
塑料 蠕變的測定 第1部分：拉伸蠕變 |
Plastics - Determination of creep behaviour - Part 1: Tensile creep (ISO 899-1:2003) |
| EN ISO 899-2-2003 |
塑料 蠕變的測定 第2部分：用三點負載測定擾屈蠕變 |
Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003) |
| EN ISO 8990-1996 |
絕熱穩態傳熱性質的測定校準和防護熱箱法 |
Thermal insulation - Determination of steady-state thermal transmission properties - Calibrated and guarded hot box (ISO 8990:1994) |
| EN ISO 8996-2004 |
熱環境的人類工效學.代謝率的測定 |
|
| EN ISO 90-1-1999 |
薄壁金屬容器尺寸、容量的定義和測定第1部分：頂開罐 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 1: Open-top cans (ISO 90-1:1997) |
| EN ISO 90-2-1999 |
薄壁金屬容器尺寸、容量的定義和測定第2部分：一般用途的容器 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 2: General use containers (ISO 90-2:1997) |
| EN ISO 90-3-2001 |
薄壁金屬容器尺寸、容量的定義和測定第3部分：噴霧罐 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 3: Aerosol cans (ISO 90-3:2000) |
| EN ISO 9000-2000 |
質量管理體系基礎和詞匯 |
Quality management systems - Fundamentals and vocabulary (ISO 9000:2000) |
| EN ISO 9000-3-1997 |
質量管理和質量保證標準第3部分：ISO 9001-1994計算機軟件的開發、供應、安裝和維護應用指南 |
Quality management and quality assurance standards - Part 3: Guidelines for the application of ISO 9001:1994 to the development, supply, installation and maintenance of computer software (ISO 9000-3:1997) |
| EN ISO 9001-2000 |
質量管理體系要求 |
Quality management systems - Requirements (ISO 9001:2000) |
| EN ISO 9004-2000 |
質量管理體系業績改進指南 |
Quality management systems - Guidelines for performance improvements (ISO 9004:2000) |
| EN ISO 9013-2002 |
熱切割 熱切割分類產品幾何量規范和質量公差 |
Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2002) |
| EN ISO 9020-1998 |
色漆和清漆用粘合劑胺類樹脂的游離甲醛含量的測定亞硫酸鈉滴定法 |
Binders for paints and varnishes - Determination of free-formaldehyde content of amino resins - Sodium sulfite titrimetric method (ISO 9020:1994, including Technical Corrigendum 1:1996) |
| EN ISO 9029-1995 |
原油水分的測定蒸餾法 |
Crude petroleum - Determination of water - Distillation method (ISO 9029:1990) |
| EN ISO 9047-2003 |
房屋建筑密封膠變溫下的粘合性能的測定 |
Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures (ISO 9047:2001) |
| EN ISO 9054-1999 |
硬質泡沫塑料自結皮高密度材料的試驗方法 |
Cellular plastics, rigid - Test methods for self-skinned, high-density materials (ISO 9054:1990) |
| EN ISO 9073-2-1996 |
紡織品非織造布試驗方法第2部分：厚度的測定 |
Textiles - Test methods for nonwovens - Part 2: Determination of thickness (EN ISO 9073-2:1995) |
| EN ISO 9073-4-1997 |
紡織品非織造布試驗方法第4部分：抗撕裂的測定 |
Textiles - Test methods for nonwovens - Part 4: Determination of tear resistance (ISO 9073-4:1997) |
| EN ISO 9073-6-2003 |
紡織品非織造布試驗方法第6部分：吸水性(注解：認可通知) |
Textiles - Test methods for nonwovens - Part 6: Absorption (ISO 9073-6:2000) |
| EN ISO 9073-7-1998 |
紡織品非織造布試驗方法第7部分：彎曲長度的測定 |
Textiles - Test methods for nonwovens - Part 7: Determination of bending length (ISO 9073-7:1995) |
| EN ISO 9073-8-1998 |
紡織品非織造布試驗方法第8部分：液體滲透時間的測定(模擬尿) |
Textiles - Test methods for nonwovens - Part 8: Determination of liquid strike-through time (simulated urine) (ISO 9073-8:1995) |
| EN ISO 9073-9-1998 |
紡織品非織造布試驗方法第9部分：懸垂系數的測定 |
Textiles - Test methods for nonwovens - Part 9: Determination of drape coefficient (ISO 9073-9:1995) |
| EN ISO 9080-2003 |
塑料管與管道系統用推斷法測定熱塑管型材料長期流動液體靜力強度 |
Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2003) |
| EN ISO 9093-1-1997 |
小艇通海旋塞及貫穿艇體配件第1部分：金屬的配件 |
Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994) |
| EN ISO 9093-2-2002 |
小艇通海旋塞及貫穿艇體配件第2部分：非金屬的 |
Small craft - Seacocks and through-hull fittings - Part 2: Non-metallic (ISO 9093-2:2002) |
| EN ISO 9094-1-2003 |
小艇防火第1部分：船長≤15米的小艇 |
Small craft - Fire protection - Part 1: Craft with a hull length of up to and including 15 m (ISO 9094-1:2003) |
| EN ISO 9094-2-2002 |
小艇防火第2部分：船長〈15米的小艇 |
Small craft - Fire protection - Part 2: Craft with a hull length of over 15 m (ISO 9094-2:2002) |
| EN ISO 9163-1998 |
紡織玻璃纖維粗紗試樣的制備和浸漬粗紗拉伸強度的測定 |
Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:1996) |
| EN ISO 9167-1-1995 |
菜籽芥子油工甙含量的測定第1部分：高效液相色譜法 |
Rapeseed - Determination of glucosinolates content - Part 1: Method using high-performamce liquid chromatography (ISO 9167-1:1992) |
| EN ISO 9167-2-1997 |
菜籽芥子油工甙含量的測定第2部分：用X－射線熒光光譜法 |
Rapeseed - Determination of glucosinolates content - Part 2: Method using X-ray fluorescence spectrometry (ISO 9167-2:1994) |
| EN ISO 9173-1-1995 |
拔牙鉗第1部分：螺釘和鉸鏈接合型 |
Dental extraction forceps - Part 1: Screw and pin joint types (ISO 9173-1:1991) |
| EN ISO 9187-1-2003 |
醫用注射器具第1部分：注射安瓿 |
Injection equipment for medical use - Part 1: Ampoules for injectables (ISO 9187-1:2000) |
| EN ISO 9220-1994 |
金屬覆蓋層鍍層厚度測量掃描電子顯微鏡法 |
Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:1988) |
| EN ISO 9222-1-1995 |
技術制圖動密封應用第1部分：通用簡化畫法 |
Technical drawings - Seals for dynamic application - Part 1: General simplified representation (ISO 9222-1:1989) |
| EN ISO 9222-2-1994 |
技術制圖動密封應用第2部分：簡化畫法 |
Technical drawings - Seals of dynamic application - Part 2: Detailed simplified representation (ISO 9222-2:1989) |
| EN ISO 9237-1995 |
紡織品織物透氣性的測定 |
Textiles - Determination of permeability of fabrics to air (ISO 9237:1995) |
| EN ISO 9239-1-2002 |
地板對火反應試驗第1部分：使用單輻射熱源的火焰性能測定 |
Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2002) |
| EN ISO 9241-10-1996 |
辦公用視覺顯示終端(VDTs)的人類工效學要求第10部分：對話原理 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 10: Dialogue principles (ISO 9241-10:1996) |
| EN ISO 9241-11-1998 |
辦公用視覺顯示終端(VDTs)的人類工效學要求第11部分：可用性指南 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 11: Guidance on usability (ISO 9241-11:1998) |
| EN ISO 9241-12-1998 |
辦公用視覺顯示終端(VDTs)的人類工效學要求第12部分：信息表達 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 12: Presentation of information (ISO 9241-12:1998) |
| EN ISO 9241-13-1998 |
辦公用視覺顯示終端(VDTs)的人類工效學要求第13部分：用戶指南 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 13: User guidance (ISO 9241-13:1998) |
| EN ISO 9241-14-1999 |
辦公用視覺顯示終端(VDTs)的人類工效學要求第14部分：菜單對話 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 14: Menu dialogues (ISO 9241-14:1997) |
| EN ISO 9241-15-1997 |
辦公用視覺顯示終端(VDTs)的人類工效學要求第15部分：命令對話 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 15: Command dialogues (ISO 9241-15:1997) |
| EN ISO 9241-16-1999 |
辦公用視覺顯示終端(VDTs)的人類工效學要求第16部分：直接處理對話 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 16: Direct manipulation dialogues (ISO 9241-16:1999) |
| EN ISO 9241-17-1998 |
辦公用視覺顯示終端(VDTs)的人類工效學要求第17部分：填表對話 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 17: Form filling dialogues (ISO 9241-17:1998) |
| EN ISO 9241-5-1999 |
辦公用視覺顯示終端(VDTs)的人類工效學要求第5部分：工作臺布置及位置要求 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 5: Workstation layout and postural requirements (ISO 9241-5:1998) |
| EN ISO 9241-6-1999 |
辦公用視覺顯示終端(VDTs)的人類工效學要求第6部分：工作環境指南 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 6: Guidance on the work environment (ISO 9241-6:1999) |
| EN ISO 9241-7-1998 |
辦公用視覺顯示終端(VDTs)的人類工效學要求第7部分：反射顯示 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 7: Requirements for display with reflections (ISO 9241-7:1998) |
| EN ISO 9241-8-1997 |
辦公用視覺顯示終端(VDTs)的人類工效學要求第8部分：顯示顏色要求 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 8: Requirements for displayed colours (ISO 9241-8:1997) |
| EN ISO 9241-9-2000 |
辦公用視覺顯示終端(VDTs)的人類工效學要求第9部分：非鍵盤輸入設備要求 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 9: Requirements for non-keyboard input devices (ISO 9241-9:2000) |
| EN ISO 9251-1995 |
絕熱傳熱狀態和材料特性詞匯 |
Thermal insulation - Heat transfer conditions and properties of materials - Vocabulary (ISO 9251:1987) |
| EN ISO 9283-1998 |
操作型工業機器人性能標準和測試方法 |
Manipulating industrial robots - Performance criteria and related test methods (ISO 9283:1998) |
| EN ISO 9288-1996 |
絕熱輻射傳熱物理量和定義 |
Thermal insulation - Heat transfer by radiation - Physical quantities and definitions (ISO 9288:1989) |
| EN ISO 9289-1995 |
油籽餅粕游離殘留已烷的測定 |
Oilseed residues - Determination of free residual hexane (ISO 9289:1991) |
| EN ISO 9300-1995 |
用文杜利臨界流量噴嘴測定氣體流量 |
Measurement of gas flow means of critical flow Venturi nozzles (ISO 9300:1990) |
| EN ISO 9308-1-2000 |
水質大腸桿菌和大腸桿菌類的檢測和計數第1部分：濾膜過濾法 |
Water quality - Detection and enumeration of Escherichia coli and coliform bacteria - Part 1: Membrane filtration method (ISO 9308-1:2000) |
| EN ISO 9311-2-2002 |
熱塑性塑料管系統的粘合劑第2部分：切變強度的測定 |
Adhesives for thermoplastics piping systems - Part 2: Determination of shear strength (ISO 9311-2:2002) |
| EN ISO 9312-1994 |
電阻焊設備電極擋塊的絕緣柱 |
Resistance welding equipment - Insulated pins for use in electrode back-ups (ISO 9312:1990) |
| EN ISO 9337-1-2000 |
隱形眼鏡后銀頂曲光度的測定第1部分：用焦距計人工調焦的方法 |
Contact lenses - Determination of back vertex power - Part 1: Method using focimeter with manual focusing (ISO 9337-1:1999) |
| EN ISO 9337-2-2004 |
接觸鏡片.后屈光度的測定.第2部分:在鹽中浸漬的接觸鏡片的測量 |
|
| EN ISO 9338-1998 |
光學和光學儀器隱形眼鏡直徑的測定 |
Optics and optical instruments - Contact lenses - Determination of the diameters (ISO 9338:1996) |
| EN ISO 9339-1-1998 |
光學和光學儀器隱形眼鏡厚度測定第1部分：固定隱形眼鏡 |
Optics and optical instruments - Contact lenses - Determination of the thickness - Part 1: Rigid contact lenses (ISO 9339-1:1996) |
| EN ISO 9340-1998 |
光學和光學儀器隱形眼鏡固定隱形眼鏡的應力測定 |
Optics and optical instruments - Contact lenses - Determination of strains for rigid contact lenses (ISO 9340:1996) |
| EN ISO 9341-1998 |
光學和光學儀器隱形眼鏡固定隱形眼鏡中夾雜物和表面不完備性的測定 |
Optics and optical instruments - Contact lenses - Determination of inclusions and surface imperfections for rigid contact lenses (ISO 9341:1996) |
| EN ISO 9342-1998 |
光學和光學儀器焦距計校正用檢驗鏡頭 |
Optics and optical instruments - Test lenses for calibration of focimeters (ISO 9342:1996) |
| EN ISO 9346-1996 |
絕熱傳質物理量和定義 |
Thermal insulation - Mass transfer - Physical quantities and definitions (ISO 9346:1987) |
| EN ISO 9360-1-2000 |
麻醉和呼吸設備用于加濕人的呼吸氣體的熱濕交換器(HMEs)第1部分：與250ml最小潮量一起使用的熱濕交換器 |
Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 ml (ISO 9360-1:2000) |
| EN ISO 9360-2-2002 |
麻醉和呼吸設備用于加濕人的呼吸氣體的熱濕交換器(HMEs)第2部分：最小落差容量為250ml的氣管造口病人用 |
Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml (ISO 9360-2:2001) |
| EN ISO 9363-1-1999 |
光學與光學儀器隱形眼鏡隱形眼鏡材料致癌的測定第1部分：瓊脂用作細菌固體培養基中的支持物的免疫擴 |
Optics and optical instruments - Contact lenses - Determination of cytotoxicity of contact lens material - Part 1: Agar overlay test and growth inhibition test (ISO 9363-1:1994) |
| EN ISO 9377-2-2000 |
水質烴油指數的測定第2部分：溶劑萃取法與氣相色譜分析法 |
Water quality - Determination of hydrocarbon oil index - Part 2: Method using solvent extraction an gas chromatography (ISO 9377-2:2000) |
| EN ISO 9391-1995 |
水質深水中大型無脊椎生物的采樣群落法定性和定量采樣器使用方法指南 |
Water quality - Sampling in deep waters for macro-invertebrates - Guidance on the use of colonization, qualitative and quantitative samplers (ISO 9391:1993) |
| EN ISO 9394-1998 |
眼科光學接觸鏡與接觸鏡保護產品用兔眼視覺研究法測定生物相容性 |
Ophthalmic optics - Contact lenses and contact lens care products - Determination of biocompatibility by ocular study using rabbit eyes (ISO 9394:1998) |
| EN ISO 9396-2000 |
塑料酚醛樹脂用自動裝置在給定溫度下對凝膠時間的測定 |
Plastics - Phenolic resins - Determination of the gel time at a given temperature using automatic apparatus (ISO 9396:1997) |
| EN ISO 9397-1997 |
塑料酚醛樹脂 游離甲醛含量的測定鹽酸胲法 |
Plastics - Phenolic resins - Determination of free-formaldehyde content - Hydroxylamine hydrochloride method (ISO 9397:1995) |
| EN ISO 9400-1995 |
鎳基合金抗晶間腐蝕性的測定 |
Nickel-based alloys - Determination of resistance to intergranular corrosion (ISO 9400:1990) |
| EN ISO 9408-1999 |
水質通過在密閉的透氣性測定器中需氧量的測定來評定有機化合物在水介質中的最大需氧生物降解能力的方法 |
Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determination of oxygen demand in a closed respirometer (ISO 9408:1999) |
| EN ISO 9409-1-2004 |
操作型工業機器人.機械接口.第1部分:板 |
|
| EN ISO 9409-2-2003 |
操作型工業機器人機械接口第2部分：軸型 |
Manipulating industrial robots - Mechanical interfaces - Part 2: Shafts (ISO 9409-2:2002) |
| EN ISO 9431-1999 |
建筑工程制圖圖樣說明紙和標題欄的位置 |
Construction drawings - Spaces for drawing and for text, and title blocks on drawing sheets (ISO 9431:1990) |
| EN ISO 9439-2000 |
水質水介質中有機化合物最終有氧生物降解能力的評價二氧化碳變化試驗 |
Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Carbon dioxide evolution test (ISO 9439:1999) |
| EN ISO 945-1994 |
鑄鐵 石墨顯微組織的分類 |
Cast iron - Designation of microstructure of graphite (ISO 945:1975) |
| EN ISO 9454-2-2000 |
軟釬焊劑分類和要求第2部分：性能要求 |
Soft soldering fluxes - Classification and requirements - Part 2: Performance requirements (ISO 9454-2:1998) |
| EN ISO 9455-10-2000 |
軟釬焊劑試驗方法第10部分：釬劑功效試驗、釬料輔展性試驗 |
Soft soldering fluxes - Test methods - Part 10: Flux efficacy tests, solder spread method (ISO 9455-10:1998) |
| EN ISO 9455-12-1994 |
軟釬焊劑試驗方法第12部分：鋼管腐蝕試驗 |
Soft soldering fluxes - Test methods - Part 12: Steel tube corrosion test (ISO 9455-12:1992) |
| EN ISO 9455-13-1999 |
軟釬焊劑試驗方法第13部分：釬劑飛濺量的測定 |
Soft soldering fluxes - Test methods - Part 13: Determination of flux spattering (ISO 9455-13:1996) |
| EN ISO 9455-15-1999 |
軟釬焊劑試驗方法第15部分：銅腐蝕試驗 |
Soft soldering fluxes - Test methods - Part 15: Copper corrosion test (ISO 9455-15:1996) |
| EN ISO 9455-16-2001 |
軟釬焊劑試驗方法第16部分：釬劑功效試驗、濕平衡法 |
Soft soldering fluxes - Test methods - Part 16: Flux efficacy tests, wetting balance method (ISO 9455-16:1998) |
| EN ISO 9455-2-1995 |
軟釬焊劑試驗方法第2部分：不揮發物的測定、沸點測定法 |
Soft soldering fluxes - Test methods - Part 2: Determination of non-volatile matter, ebulliometric method (ISO 9455-2:1993) |
| EN ISO 9455-6-1997 |
軟釬焊劑試驗方法第6部分：鹵化物(不包括氟化物)的含量測定 |
Soft soldering fluxes - Test methods - Part 6: Determination and detection of halide (excluding fluoride) content (ISO 9455-6:1995) |
| EN ISO 9455-9-1995 |
軟釬焊劑試驗方法第9部分：氨含量測定 |
Soft soldering fluxes - Test methods - Part 9: Determination of ammonia content (ISO 9455-9:1993) |
| EN ISO 9456-1996 |
光學和光學儀器眼科光學眼鏡架標志 |
Optics and optical instruments - Ophthalmic optics - Marking of spectacle frames (ISO 9456:1991) |
| EN ISO 9488-1999 |
太陽能詞匯 |
Solar energy - Vocabulary (ISO 9488:1999) |
| EN ISO 9509-1995 |
水質評價化學藥品和污水對活性污泥中微生物硝化抑制作用的方法 |
Water quality - Method for assessing the inhibition of nitrification of activated sludge micro-organisms by chemicals and waste water (ISO 9509:1989) |
| EN ISO 9513-2002 |
金屬材料抗拉試驗第4部分：單軸試驗用的變形測定儀的檢準 |
Metallic materials - Calibration of extensometers used in uniaxial testing (ISO 9513:1999) |
| EN ISO 9514-1994 |
色漆和清漆液態體系適用期測定樣品的制備和處理以及試驗指南 |
Paints and varnishes - Determination of the pot-life of liquid systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:1992) |
| EN ISO 9556-2001 |
鋼和鐵全碳量的測定電感應爐中燃燒后紅外線吸收法 |
Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace (ISO 9556:1989) |
| EN ISO 9562-2004 |
水質.可吸附鹵素(AOX)的測定 |
|
| EN ISO 960-1997 |
塑料聚酰胺(PA)水含量的測定 |
Plastics - Polyamides (PA) - Determination of water content (ISO 960:1988) |
| EN ISO 9606-3-1999 |
焊工的認可試驗熔焊第3部分：銅和銅合金 |
Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999) |
| EN ISO 9606-4-1999 |
焊工的認可試驗熔焊第4部分：鎳及鎳合金 |
Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999) |
| EN ISO 9606-5-2000 |
焊工的認可試驗熔焊第5部分：鈦及鈦合金、鋯和鋯合金 |
Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000) |
| EN ISO 9614-1-1995 |
聲學聲強法測定噪聲源聲功率級第1部分：離散點測量法 |
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) |
| EN ISO 9614-2-1996 |
聲學聲強法測定噪聲源聲功率級第2部分：掃描測量法 |
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning (ISO 9614-2:1996) |
| EN ISO 9614-3-2002 |
聲學聲強法測定噪聲源聲功率級第3部分：掃描測量的精確方法 |
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002) |
| EN ISO 9653-2000 |
粘合劑粘合件剪切沖擊強度測定方法 |
Adhesives - Test method for shear impact strength of adhesive bonds (ISO 9653:1998) |
| EN ISO 9664-1995 |
粘合劑拉伸剪切膠粘件疲勞性能的試驗方法 |
Adhesives - Test methods for fatigue properties of structural adhesives in tensile shear (ISO 9664:1993) |
| EN ISO 9665-2000 |
粘合劑動物膠取樣和試驗方法 |
Adhesives - Animal glues - Methods of sampling and testing (ISO 9665:1998) |
| EN ISO 9680-1996 |
牙科工作燈(包括技術勘誤1) |
Dental operating light (ISO 9680:1993 including Technical Corrigendum 1:1995) |
| EN ISO 9687-1995 |
牙科設備圖形符號 |
Dental equipment - Graphical symbols (ISO 9687:1993) |
| EN ISO 9692-2-1998 |
焊接和相關工藝接頭的制備第2部分：鋼的埋弧焊 |
Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:1998) |
| EN ISO 9692-3-2001 |
焊接和相關工藝接頭制備的建議第3部分：鋁及鋁合金的金屬焊條惰性氣體保護焊和鎢焊條惰性氣體保護焊 |
Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2000) |
| EN ISO 9692-4-2003 |
焊接和相關工藝接頭制備的建議第4部分：復合鋼 |
Welding and allied processes - Recommendations for joint preparation - Part 4: Clad steels (ISO 9692-4:2003) |
| EN ISO 9693-2000 |
牙科金屬烤瓷修復系統 |
Metal-ceramic dental restorative systems (ISO 9693:1999) |
| EN ISO 9694-1998 |
牙科磷酸鹽結合劑鑄造包埋材料 |
Dental phosphate-bonded casting investments (ISO 9694:1996) |
| EN ISO 9702-1998 |
塑料胺類環氧固化劑伯、仲和叔胺基團氨含量的測定 |
Plastics - Amine epoxide hardeners - Determination of primary, secondary and tertiary amine group nitrogen content (ISO 9702:1996) |
| EN ISO 9703-3-1998 |
麻醉和呼吸護理報警信號第3部分：警報應用指南 |
Anaesthesia and respiratory care alarm signals - Part 3: Guidance on application of alarms (ISO 9703-3:1998) |
| EN ISO 9706-1998 |
信息和文獻文件用紙耐用性要求 |
Information and documentation - Paper for documents - Requirements for permanence (ISO 9706:1994) |
| EN ISO 9707-1994 |
信息和文獻圖書、報紙、期刊和電子出版物的生產和銷售統計表 |
Information and documentation - Statistics on the production and distribution of books, newspapers, periodicals and electronic publications (ISO 9707:1991) |
| EN ISO 9713-2004 |
神經外科植入物.自鎖顱內動脈瘤夾鉗 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com