標準號 |
中文名稱 |
英文名稱 |
| BS ISO 4020-2002 |
道路車輛.柴油發動機的燃油濾清器.試驗方法 |
Road vehicles - Fuel filters for diesel engines.Test methods |
| BS ISO 4037-1-1998 |
校準劑量計和劑量強度計及測定充作為光子函數的靈敏度用的X 和γ標準輻射.第1部分:輻射性產生法 |
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Radiation characteristics and production methods |
| BS ISO 4037-2-1998 |
校準劑量計和劑量強度計及測定充作為光子函數的靈敏度用的X 和γ標準放射源.能量范圍在8KeV-1,3MeV和4MeV-9MeV輻射保護用劑量學 |
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Dosimetry for radiation protection over the energy ranges 8 keV to 1, 3 MeV and 4 MeV to 9 MeV |
| BS ISO 4037-3-1999 |
校準劑量計和劑量強度計及測定充作為光子函數的靈敏度用的X 和γ標準輻射.第1部分:輻射性產生法 |
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Calibration of area and personal dosemeters and the measurement of their response as a function of energy an |
| BS ISO 4037-4-2004 |
校準劑量儀和劑量率儀及確定其光子能量響應的Χ和γ參考輻射.低能X參考輻射場中場所劑量計和個人劑量計的校準 |
|
| BS ISO 4037-4-2004 |
校準劑量儀和劑量率儀及確定其光子能量響應的Χ和γ參考輻射.低能X參考輻射場中場所劑量計和個人劑量計的校準 |
|
| BS ISO 4046-1-2003 |
紙、紙板、紙漿及其術語.詞匯.按字母順序排列的索引 |
Paper, board, pulps and related terms - Vocabulary - Alphabetical index |
| BS ISO 4046-2-2003 |
紙、紙板、紙漿及其術語.詞匯.打漿術語 |
Paper, board, pulps and related terms - Vocabulary - Pulping terminology |
| BS ISO 4046-3-2003 |
紙、紙板、紙漿及其術語.詞匯.造紙術語 |
Paper, board, pulps and related terms - Vocabulary - Paper-making terminology |
| BS ISO 4046-4-2003 |
紙、紙板、紙漿及其術語.詞匯.紙和紙板的等級和加工產品 |
Paper, board, pulps and related terms - Vocabulary - Paper and board grades and converted products |
| BS ISO 4046-5-2003 |
紙、紙板、紙漿及其術語.詞匯.紙漿、紙和紙板的特性 |
Paper, board, pulps and related terms - Vocabulary - Properties of pulp, paper and board |
| BS ISO 4057-1992 |
信息處理.63字節/mm(1600字節/in)相位編碼式寬6.3mm(0.25in)盒式磁帶的數據交換 |
Information processing - Data interchange on 6,30 mm (0.25 in) magnetic tape cartridge, 63 bpmm (1600 bpi) phase-encoded |
| BS ISO 406-2000 |
技術圖紙.直線和角度的尺寸公差 |
Technical drawings - Tolerancing of linear and angular dimensions |
| BS ISO 4064-2-2001 |
封閉管道中水流量的測量.飲用冷水測量計.安裝要求和選擇 |
Measurement of water flow in closed conduits - Meters for cold potable water - Installation requirements and selection |
| BS ISO 4065-1997 |
熱塑塑料管.通用管壁厚度表 |
Thermoplastics pipes - Universal wall thickness table |
| BS ISO 4087-1991 |
縮微攝影.檔案用35mm縮微膠片上的報紙縮微攝影 |
Micrographics - Microfilming of newspapers for archival purposes on 35 mm microfilm |
| BS ISO 4087-2005 |
縮微攝影技術.35mm縮微膠片存檔用報紙的縮微攝影 |
|
| BS ISO 4090-2001 |
攝影.醫療放射照相用X光底片盒/屏蔽物/膠片和硬拷貝成像膠片.尺寸和規范 |
Photography - Medical radiographic cassettes/screens/films and hard-copy imaging films - Dimensions and specifications |
| BS ISO 4093-2000 |
柴油發動機.噴油泵.試驗用高壓管 |
Diesel engines - Fuel injection pumps - High-pressure pipes for testing |
| BS ISO 4096-2001 |
香精油(包括叔醇).用測定冷態甲�；蟮孽セ捣y定游離醇含量 |
Essential oils (containing tertiary alcohols) - Evaluation of free alcohols content by determination of ester value after cold formylation |
| BS ISO 4097-2001 |
乙丙烯二烯烴橡膠(EPDM).評定規程 |
Rubber, ethylene-propylene-diene (EPDM) - Evaluation procedure |
| BS ISO 4115-1998 |
空中貨運設備.空中/地面用托盤網 |
Air cargo equipment - Air/land pallet nets |
| BS ISO 4120-2004 |
感官分析.方法學.三角試驗 |
|
| BS ISO 4121-2003 |
感官分析.定量反應秤的使用指南 |
(Sensory analysis - Guidelines for the use of quantitative response scales) |
| BS ISO 4138-2004 |
道路車輛.恒速環行駕駛.開環試驗方法 |
|
| BS ISO 4148-2004 |
道路車輛.專用警示信號燈.尺寸 |
|
| BS ISO 4149-2005 |
生咖啡.嗅覺和視覺檢驗及對雜質和缺陷的測定 |
|
| BS ISO 4161-1999 |
帶法蘭的六角螺母.粗螺紋 |
Hexagon nuts with flange - Coarse thread |
| BS ISO 4168-2002 |
時間計量儀表.輻射發光沉積檢驗條件 |
Timekeeping instruments - Conditions for carrying out checks on radioluminescent deposits |
| BS ISO 4179-2005 |
壓力和非壓力管道用球墨鑄鐵管和配件.水泥灰漿內襯 |
|
| BS ISO 418-2002 |
攝影.沖洗用藥液.無水亞硫酸鈉規范 |
Photography - Processing chemicals - Specifications for anhydrous sodium sulfite |
| BS ISO 4190-1-2002 |
電梯安裝.I、II、III和VI類電梯 |
Lift (US: Elevator) installation - Class I, II, III and VI lifts |
| BS ISO 4190-2-2002 |
電梯安裝.Ⅳ類電梯 |
Lift (US: Elevator) installation - Class IV lifts |
| BS ISO 420-1995 |
攝影技術.攝影材料加工用化學藥品.溴化鉀規范 |
Photography - Processing chemicals - Specifications for potassium bromide |
| BS ISO 422-1995 |
攝影技術.攝影材料加工用化學藥品.對接甲基氨基苯酚硫酸鹽規范 |
Photography - Processing chemicals - Specifications for p-methylaminophenol sulfate |
| BS ISO 423-1995 |
攝影技術.攝影材料加工用化學藥品.對苯二酚規范 |
Photography - Processing chemicals - Specification for hydroquinone |
| BS ISO 424-1995 |
攝影技術.處理用化學藥品.無水碳酸鈉和碳酸鈉一水化物的規范 |
Photography - Processing chemicals - Specification for anhydrous sodium carbonate and sodium carbonate monohydrate |
| BS ISO 4241-1996 |
電影技術.35mm和16mm發行拷貝的片頭和片尾.規范 |
Cinematography - Leaders and run-out trailers for 35 mm and 16 mm release prints - Specifications |
| BS ISO 4241-2003 |
電影.電影院放映片頭、片尾和換機標記.規范 |
(Cinematography - Theatre projection leader, trailer and cue marks - Specifications) |
| BS ISO 4246-1995 |
電影技術.詞匯 |
Cinematography - Vocabulary |
| BS ISO 4249-3-2005 |
摩托車輪胎和輪輞(代號規格系列).輪輞 |
|
| BS ISO 4266-1-2002 |
石油和液態石油產品.用自動法測定儲罐中溫度和液面.氣罐的液面測量 |
Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Measurement of level in atmospheric tanks |
| BS ISO 4266-2-2002 |
石油和液態石油產品.用自動法測定儲罐中溫度和液面.船用容器的液面測量 |
Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Measurement of level in marine vessels |
| BS ISO 4266-3-2002 |
石油和液態石油產品.用自動法測定儲罐中溫度和液面.加壓儲罐的液面測量(非冷卻的) |
Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Measurement of level in pressurized storage tanks (non-refrigerated) |
| BS ISO 4266-4-2002 |
石油和液態石油產品.用自動法測定儲罐中溫度和液面.氣罐溫度的測量 |
Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Measurement of temperature in atmospheric tanks |
| BS ISO 4266-5-2002 |
石油和液態石油產品.用自動法測定儲罐中溫度和液面.船用容器溫度的測量 |
Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Measurement of temperature in marine vessels |
| BS ISO 4266-6-2002 |
石油和液態石油產品.用自動法測定儲罐中溫度和液面.加壓儲罐溫度的測量(非冷卻的) |
Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Measurement of temperature in pressurized storage tanks (non-refrigerated) |
| BS ISO 4268-2000 |
石油和液化石油產品.溫度測量.手工方法 |
Petroleum and liquid petroleum products - Temperature measurements - Manual methods |
| BS ISO 4269-2001 |
石油和液化石油產品.通過液體測量進行油箱校準.使用容積測量儀的遞增法 |
Petroleum and liquid petroleum products - Tank calibration by liquid measurement - Incremental method using volumetric meters |
| BS ISO 4308-1-2003 |
起重機和提升設備.鋼絲繩的選用.總則 |
(Cranes and lifting appliances - Selection of wire ropes - General) |
| BS ISO 4309-2004 |
起重機.金屬絲繩.保養、維修、安裝、檢查和報廢 |
|
| BS ISO 4365-2005 |
明渠水流.河、河渠泥沙.含沙量、粒度分布和相對密度的測定 |
|
| BS ISO 4375-2001 |
流體比重測定.用于水流水文測量的索道裝置 |
Hydrometric determinations - Cableway systems for stream gauging |
| BS ISO 4377-2002 |
比重測定.使用構造物的明渠液體流量測量.V形平面溢流堰 |
Hydrometric determinations - Flow measurement in open channels using structures - Flat-V weirs |
| BS ISO 4381-2000 |
滑動軸承.多層滑動軸承用鉛錫鑄造合金 |
Plain bearings - Lead and tin casting alloys for multilayer plain bearings |
| BS ISO 4383-2000 |
滑動軸承.薄壁滑動軸承用多層材料 |
Plain bearings - Multilayer materials for thin-walled plain bearings |
| BS ISO 4384-1-2000 |
滑動軸承.軸承合金的硬度試驗.復合材料 |
Plain bearings - Hardness testing of bearing metals - Compound materials |
| BS ISO 4392-1-2002 |
液壓傳動.發動機特性測定.在恒低速和常壓下 |
Hydraulic fluid power - Determination of characteristics of motors - At constant low speed and constant pressure |
| BS ISO 4392-2-2002 |
液壓傳動.發動機特性測定.穩定性 |
Hydraulic fluid power - Determination of characteristics of motors - Startability |
| BS ISO 4401-1996 |
液壓傳動.四油口定向控制閥.裝配面 |
Hydraulic fluid power - Four-port directional control valves - Mounting surfaces |
| BS ISO 4404-1-2002 |
石油和相關產品.耐火液壓液耐腐蝕性測定.含水液體 |
Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Water-containing fluids |
| BS ISO 4404-1998 |
石油和相關產品.液壓系統用含水耐火液體的耐腐蝕性測定 |
Petroleum and related products - Determination of the corrosion resistance of water-containing fire-resistant fluids for hydraulic systems |
| BS ISO 4406-2000 |
液壓傳動.流體.固體微粒污染分級編碼法 |
Hydraulic fluid power - Fluids - Method for coding the level of contamination by solid particles |
| BS ISO 4407-2002 |
液壓傳動.液壓液污染.用光學顯微鏡計數法測定粒狀物污染 |
Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope |
| BS ISO 4413-1998 |
液壓傳動.與系統相關的一般規則 |
Hydraulic fluid power - General rules relating to systems |
| BS ISO 4414-1998 |
氣壓傳動.與系統相關的一般規則 |
Pneumatic fluid power - General rules relating to systems |
| BS ISO 4433-1-1998 |
熱塑管.耐液體化學藥品的性能.分類.第1部分:浸入試驗 |
Thermoplastic pipes - Resistance to liquid chemicals - Classification - Immersion test method |
| BS ISO 4433-2-1998 |
熱塑管.耐液體化學藥品的性能.分類.第2部分:聚烯烴管 |
Thermoplastics pipes - Resistance to liquid chemicals - Classification - Polyolefin pipes |
| BS ISO 4433-3-1998 |
熱塑管.耐液體化學藥品的性能.分類.第3部分:未增塑聚氯乙烯(PVC-U),耐沖性聚氯乙烯(PVC-HI)和氯化聚氯乙烯(PVC-C)管 |
Thermoplastic pipes - Resistance to liquid chemicals - Classification - Unplasticized poly(vinyl chloride) (PVC-U), high-impact poly(vinyl chloride) (PVC-HI) and chlorinated poly(vinyl chloride) (PVC-C) pipes |
| BS ISO 4433-4-1998 |
熱塑管.耐液體化學藥品的性能.分類.第4部分:聚偏氟乙烯管 |
Thermoplastics pipes - Resistance to liquid chemicals - Classification - Poly(vinylidene fluoride) (PVDF) pipes |
| BS ISO 449-1997 |
造船和航海技術.A級磁羅盤、羅盤座和方位閱讀裝置 |
Ships and marine technology. Magnetic compasses, binnacles and azimuth reading devices. Class A |
| BS ISO 4507-2000 |
燒結鐵類材料.滲碳或碳氮共滲.用微型硬度測試法測定和驗證外層淬火的深度 |
Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test |
| BS ISO 4512-2001 |
石油和液態石油產品.儲油罐中液位的測量設備.人工法 |
Petroleum and liquid petroleum products - Equipment for measurement of liquid levels in storage tanks - Manual methods |
| BS ISO 4524-2-2000 |
金屬鍍層.金及金合金電鍍層的試驗方法.混合流動氣體(MFG)環境試驗 |
Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Mixed flowing gas (MFG) environmental tests |
| BS ISO 4525-2003 |
金屬鍍層.塑料材料上的鎳加鉻電鍍層 |
Metallic coatings - Electroplated coatings of nickel plus chromium on plastics materials |
| BS ISO 4528-2000 |
上釉和瓷釉精整.物品上釉和涂以瓷釉面積的試驗方法的選擇 |
Vitreous and porcelain enamel finishes - Selection of test methods for vitreous and porcelein enamelled areas of articles |
| BS ISO 4587-2003 |
粘合劑.剛性對剛性的粘接組件拉伸搭接剪切強度的測定 |
(Adhesives - Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies) |
| BS ISO 4589-1-1997 |
塑料.通過氧指數測定其燃燒性.第1部分:總則 |
Plastics. Determination of burning behaviour by oxygen index. Guidance |
| BS ISO 4602-1998 |
增強材料.機織物.整經和整緯單長度紗的數量測定 |
Reinforcements - Woven fabrics - Determination of number of yarns per unit length of warp and weft |
| BS ISO 4603-1996 |
紡織玻璃纖維.織物.厚度的測定 |
Textile glass - Woven fabrics - Determination of thickness |
| BS ISO 4606-1995 |
紡織玻璃纖維.織物.用條法測定斷裂張力和斷裂伸長 |
Textile glass - Woven fabric - Determination of tensile breaking force and elongation at break by the strip method |
| BS ISO 4619-1998 |
色漆和清漆用干燥劑 |
Driers for paints and varnishes |
| BS ISO 4625-1-2005 |
色漆和清漆用粘合劑.軟化點的測定.環和球法 |
|
| BS ISO 4625-1-2005 |
色漆和清漆用粘合劑.軟化點的測定.環和球法 |
|
| BS ISO 4625-2-2005 |
色漆和清漆用粘合劑.軟化點的測定.杯和球法 |
|
| BS ISO 4639-2-1996 |
內燃機燃料管路用橡膠管和軟管.規范.第2部分:已氧化燃料 |
Rubber tubing and hoses for fuel circuits for internal-combustion engines - Specification - Oxygenated fuels |
| BS ISO 4639-3-1996 |
內燃機燃料管路用橡膠管和軟管.規范.第3部分:被氧化的燃料 |
Rubber tubing and hoses for fuel circuits for internal-combustion engines - Specification - Oxidized fuels |
| BS ISO 464-1995 |
滾動軸承.有彈簧固定環的徑向軸承尺寸 |
Rolling bearings - Radial bearings with locating snap ring - Dimensions and tolerances |
| BS ISO 4649-2002 |
硫化或熱塑性橡膠.用旋轉滾筒裝置測定耐磨性 |
(Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device) |
| BS ISO 4658-2000 |
丙烯腈一丁二烯橡膠(NBR).評定過程 |
Acrylonitrile-butadiene rubber (NBR) - Evaluation procedure |
| BS ISO 4659-2003 |
苯乙烯-丁二烯橡膠(炭黑或炭黑和油母煉膠).評價方法 |
Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches) - Evaluation procedure |
| BS ISO 4660-2000 |
天然生橡膠.顏色指數試驗 |
Rubber, raw natural - Colour index test |
| BS ISO 4664-1-2005 |
硫化或熱塑性橡膠.動態性能的測定.通用指南 |
|
| BS ISO 4664-1998 |
橡膠.動態性能測定指南 |
Rubber - Guide to the determination of dynamic properties |
| BS ISO 4665-2001 |
硫化和熱塑橡膠.耐風化能力 |
Rubber, vulcanized and thermoplastic - Resistance to weathering |
| BS ISO 4689-2-2004 |
鐵礦石.硫含量的測定.燃燒和滴定法 |
|
| BS ISO 4689-3-2004 |
鐵礦石.硫含量的測定.燃燒和紅外線法 |
|
| BS ISO 4695-1996 |
鐵礦石.還原性的測定 |
Iron ores - Determination of reducibility |
| BS ISO 4698-1995 |
鐵礦石顆粒.自由膨脹指數測定 |
Iron ore pellets - Determination of relative free-swelling index |
| BS ISO 4703-2001 |
雙柱式平面磨床的驗收條件.導軌磨床.精度試驗 |
Test conditions for surface grinding machines with two columns - Machines for grinding slideways - Testing of the accuracy |
| BS ISO 4708-2000 |
復合軟木.填料.試驗方法 |
Composition cork - Gasket material - Test methods |
| BS ISO 4709-2001 |
復合軟木.墊圈材料.分類體系、要求、取樣、包裝和標記 |
Composition cork - Gasket material - Classification system, requirements, sampling, packing and marking |
| BS ISO 4710-2000 |
發泡的酒類和充氣的酒類的圓柱形軟木瓶塞.特性 |
Cork - Cylindrical stoppers for sparkling wines and gasified wines - Characteristics |
| BS ISO 4714-2000 |
復合軟木.規范、抽樣、包裝和作標記 |
Composition cork - Specifications, sampling, packaging and marking |
| BS ISO 4715-2001 |
香精油.蒸發后殘渣的定量測定 |
Essential oils - Quantitative evaluation of residue on evaporation |
| BS ISO 4718-2004 |
檸檬草油(香茅屬鋸齒狀的) |
|
| BS ISO 4718-2004 |
檸檬草油 |
|
| BS ISO 472-2000 |
塑料.詞匯 |
Plastics. Vocabulary |
| BS ISO 4720-2000 |
香精油.命名 |
Essential oils - Nomenclature |
| BS ISO 4724-2004 |
弗吉尼亞柏木油 |
|
| BS ISO 4724-2004 |
弗吉尼亞柏木油 |
|
| BS ISO 4725-2004 |
得克薩斯柏木油 |
|
| BS ISO 4725-2004 |
得克薩斯柏木油 |
|
| BS ISO 4728-2003 |
西班牙野生牛至菜油 |
(Oil of Spanish wild marjoram (Thymus mastichina L.)) |
| BS ISO 4730-2004 |
白千層油.對孟烯-1-醇-4型(茶樹油) |
|
| BS ISO 4730-2004 |
白千層油.萜品醇-1-醇-4型(茶樹油) |
|
| BS ISO 4733-2004 |
小豆寇油 |
|
| BS ISO 4733-2004 |
小豆寇油 |
|
| BS ISO 4782-1998 |
工業金屬絲網篩和金屬絲篩布用金屬絲規范 |
Specification for metal wire for industrial wire screens and woven wire cloth |
| BS ISO 4795-1997 |
實驗室玻璃器皿.溫度計球頭用玻璃 |
Laboratory glassware - Glass for thermometer bulbs |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com