標準號 |
中文名稱 |
英文名稱 |
| DIN EN ISO 11124-4-1997 |
用涂層材料涂覆前鋼表面的準備工作.金屬噴射清潔材料的要求.第4部分:低碳鑄鋼噴丸 |
(Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot (ISO 11124-4:1993); German version EN ISO 11124-4:1997) |
| DIN EN ISO 11125-1-1997 |
涂料及相關產品應用前鋼襯墊的制備.金屬噴砂清理磨料的試驗方法.第1部分:取樣 |
(Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:1993); German version EN ISO 11125-1:1997) |
| DIN EN ISO 11125-2-1997 |
涂料及相關產品應用前鋼襯墊的制備.金屬噴砂清理磨料的試驗方法.第2部分:粒度分布的測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11125-2:1993); German version EN ISO 11125-2:1997) |
| DIN EN ISO 11125-3-1997 |
涂料及相關產品應用前鋼襯墊的制備.金屬噴砂清理磨料的試驗方法.第3部分:硬度的測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness (ISO 11125-3:1993); German version EN ISO 11125-3:1997) |
| DIN EN ISO 11125-4-1997 |
涂料及相關產品應用前鋼襯墊的制備.金屬噴砂清理磨料的試驗方法.第4部分:表觀密度的測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 4: Determination of apparent density (ISO 11125-4:1993); German version EN ISO 11125-4:1997) |
| DIN EN ISO 11125-5-1997 |
涂料和相關產品應用前鋼襯底的制備.金屬噴沙清理磨料的試驗方法.第1部分:有缺陷的顆粒和微結構的測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure (ISO 11125-5:1993); German version EN I |
| DIN EN ISO 11125-6-1997 |
涂料和相關產品應用前鋼襯底的制備.金屬噴沙清理磨料的試驗方法.第1部分:外來雜質的測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 6: Determination of foreign matter (ISO 11125-6:1993); German version EN ISO 11125-6:1997) |
| DIN EN ISO 11125-7-1997 |
涂層材料涂層前鋼表面的預處理.金屬噴丸的檢驗方法.第7部分:濕度測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 7: Determination of moisture (ISO 11125-7:1993); German version EN ISO 11125-7:1997) |
| DIN EN ISO 11126-1-1997 |
用涂層材料涂覆前鋼表面的準備工作.非金屬噴射清潔材料的要求.第1部分:一般介紹和分類 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11126-1:1993, including Technical Corrigenda 1:1997 and 2: |
| DIN EN ISO 11126-3-1997 |
用涂層材料涂覆前鋼表面的準備工作.非金屬噴射清潔材料的要求.第3部分:煉銅熔渣制噴丸 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag (ISO 11126-3:1993); German version EN ISO 11126-3:1997) |
| DIN EN ISO 11126-4-1998 |
用涂層材料涂覆前鋼表面的準備工作.非金屬噴射清潔材料的要求.第4部分:熔渣制鋼丸 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag (ISO 11126-4:1993); German version EN ISO 11126-4:1998) |
| DIN EN ISO 11126-5-1998 |
用涂層材料涂覆前鋼表面的準備工作.非金屬噴射清潔材料的要求.第5部分:煉鎳熔渣制噴丸 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 5: Nickel refinery slag (ISO 11126-5:1993); German version EN ISO 11126-5:1998) |
| DIN EN ISO 11126-6-1997 |
涂料和相關產品應用前鋼襯底的制備.非金屬噴沙清理磨料的試驗方法.第6部分:鐵爐熔渣 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag (ISO 11126-6:1993); German version EN ISO 11126-6:1997) |
| DIN EN ISO 11126-7-1999 |
涂料和相關產品應用前鋼襯底的制備.非金屬噴沙清理磨料的試驗方法.第7部分:熔氧化鋁 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide (ISO 11126-7:1995); German version EN ISO 11126-7:1999) |
| DIN EN ISO 11126-8-1997 |
涂料和相關產品應用前鋼襯底的制備.非金屬噴沙清理磨料的試驗方法.第8部分:橄欖石沙 |
(Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine sand (ISO 11126-8:1993); German version EN ISO 11126-8:1997) |
| DIN EN ISO 11127-1-1997 |
涂料和相關產品應用之前鋼襯底的制備.非金屬噴砂清理磨料的試驗方法.第1部分:抽樣 |
(Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11127-1:1993); German version EN ISO 11127-1:1997) |
| DIN EN ISO 11127-2-1997 |
涂料和相關產品應用前鋼襯底的制備.非金屬噴沙清理磨料的試驗方法.第2部分:粒度分布的測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:1993); German version EN ISO 11127-2:1997) |
| DIN EN ISO 11127-3-1997 |
涂料和相關產品應用前鋼襯底的制備.非金屬噴沙清理磨料的試驗方法.第3部分:表觀密度的測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:1993); German version EN ISO 11127-3:1997) |
| DIN EN ISO 11127-4-1997 |
涂料和相關產品應用前鋼襯底的制備.非金屬噴沙清理磨料的試驗方法.第4部分:通過玻璃劃痕試驗對硬度的評估 |
(Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:1993); German version EN ISO 11127-4:1997) |
| DIN EN ISO 11127-5-1997 |
涂料和相關產品應用前鋼襯底的制備.非金屬噴沙清理磨料的試驗方法.第5部分:潮濕度的測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture (ISO 11127-5:1993); German version EN ISO 11127-5:1997) |
| DIN EN ISO 11127-6-1997 |
涂料和相關產品應用前鋼襯底的制備.非金屬噴沙清理磨料的試驗方法.第6部分:通過電導率測量對水溶污染的測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:1993); German versio |
| DIN EN ISO 11127-7-1997 |
涂料和相關產品應用前鋼襯底的制備.非金屬噴沙清理磨料的試驗方法.第7部分:對水溶氯化物的測定 |
(Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water soluble chlorides (ISO 11127-7:1993); German version EN ISO 11127-7:1997) |
| DIN EN ISO 11130-1999 |
金屬與合金的腐蝕性.鹽溶液中反復腐蝕試驗 |
(Corrosion of metals and alloys - Alternate immersion test in salt solution (ISO 11130:1999); German version EN ISO 11130:1999) |
| DIN EN ISO 11143-2002 |
牙科設備.汞齊合金分離器 |
(Dental equipment - Amalgam separators (ISO 11143:1999 + Cor.1:2002) (includes corrigendum AC:2002); German version EN ISO 11143:1999 + AC:2002) |
| DIN EN ISO 11144-1996 |
牙科設備.給排水管接頭 |
(Dental equipment - Connections for supply and waste lines (ISO 11144:1995); German version EN ISO 11144:1996) |
| DIN EN ISO 11145-2002 |
光學和光學儀器.激光和有關的激光設備.詞匯和符號 |
(Optics and optical instruments - Laser and laser-related equipment - Vocabulary and symbols (ISO 11145:2001); German version EN ISO 11145:2001) |
| DIN EN ISO 11146-1999 |
激光和激光相關設備.激光束參數的試驗方法.射線測量,離向角和射線傳播系數 |
(Lasers and laser related equipment - Test methods for laser beam parameters - Beam widths, divergence angle and beam propagation factor (ISO 11146:1999); German version EN ISO 11146:1999) |
| DIN EN ISO 11146-2-2005 |
激光和激光相關設備.激光束寬度、發散角和束擴散率的試驗方法.第2部分:一般象散束 |
|
| DIN EN ISO 11146-2-2005 |
激光和激光相關設備.激光束寬度、發散角和束擴散率的試驗方法.第2部分:一般象散束 |
|
| DIN EN ISO 11149-1997 |
光學和光學儀器.激光和激光相關設備.非電信激光應用的光纖接頭 |
(Optics and optical instruments - Lasers and laser-related equipment - Fibre optic connectors for non-telecommunication laser application (ISO 11149:1997); German version EN ISO 11149:1997) |
| DIN EN ISO 11151-1-2000 |
激光和激光相關設備.標準光學件.第1部分:紫外線、可見光和近紅外線光譜范圍內件 |
(Lasers and laser-related equipment - Standard optical components - Part 1: Components for the ultraviolet, visible and near-infrared spectral range (ISO 11151-1:2000); German version EN ISO 11151-1:2000) |
| DIN EN ISO 11151-2-2000 |
激光和激光相關設備.標準光學件.第2部分:紅外線光譜范圍內件 |
(Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2000); German version EN ISO 11151-2:2000) |
| DIN EN ISO 1119-2003 |
產品幾何量技術規范(GPS).錐度和錐度角系列 |
(Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:1998); German version EN ISO 1119:2002) |
| DIN EN ISO 11196-1997 |
麻醉氣體用監測器 |
(Aneasthetic gas monitors (ISO 11196:1995 including Technical Corrigendum 1:1997); German version EN ISO 11196:1997) |
| DIN EN ISO 11197-2005 |
醫療供電設備 |
|
| DIN EN ISO 11199-1-2000 |
雙臂操作的助步器.要求和試驗方法.第1部分:步行支架 |
(Walking aids manipulated by both arms - Requirements and test methods - Part 1: Walking frames (ISO 11199-1:1999); German version EN ISO 11199-1:1999) |
| DIN EN ISO 11199-2-2000 |
雙臂操作的助步器.要求和試驗方法.第2部分:滾動器 |
(Walking aids manipulated by both arms - Requirements and test methods - Part 2: Rollators (ISO 11199-2:1999); German version EN ISO 11199-2:1999) |
| DIN EN ISO 11199-2-2005 |
雙臂操作的助步器.要求和試驗方法.第2部分:滾動器 |
|
| DIN EN ISO 1120-2002 |
傳送帶.機械緊固件強度測定.靜態試驗方法 |
(Conveyor belts - Determination of strength of mechanical fastenings - Static test method (ISO 1120:2002); German version EN ISO 1120:2002) |
| DIN EN ISO 11200-1996 |
聲學.機械和設備發出的噪聲.在工作站和其他特定位置發射聲壓級測定基本標準導則 |
(Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:1995); German version EN ISO 11200:1995 |
| DIN EN ISO 11201-1996 |
聲學.機械裝置及設備發出的噪聲.工作地點和其它試驗場所輻射聲壓級的測量.反射平面上基本自由聲區用2級精度 |
(Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions; engineering method in an essentially free field over a reflecting plane (ISO 11201:1995); German vers |
| DIN EN ISO 11202-1996 |
聲學.機械裝置及設備發出的噪聲.工作地點和其它試驗場所輻射聲壓級的測量.在使用條件下測量的3級精度方法 |
(Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions; survey method in situ (ISO 11202:1995); German version EN ISO 11202:1995) |
| DIN EN ISO 11203-1996 |
聲學.機械裝置及設備發出的噪聲.工作地點和其它聲功率級試驗場所的輻射聲壓級測量 |
(Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995); German version EN ISO 11203:1995) |
| DIN EN ISO 11204-1996 |
聲學.機械裝置及設備發出的噪聲.工作地點和其它試驗場所的輻射聲壓級測量.環境改善法 |
(Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions; method requiring environmental corrections (ISO 11204:1995); German version EN ISO 11204:1995) |
| DIN EN ISO 11205-2004 |
聲學.機械和設備發出的噪音.使用聲強現場測定工作位和其它特殊位置的聲壓級別的工程方法 |
|
| DIN EN ISO 11210-1995 |
鉑裝飾合金中鉑量測定.用六氯鉑酸二銨沉淀作重力測定 |
(Determination of platinum in platinum jewellery alloys - Gravimetric method after precipitation of diammonium hexachloroplatinate (ISO 11210:1995); German version EN ISO 11210:1995) |
| DIN EN ISO 11212-1-1997 |
淀粉和淀粉制品.重金屬含量.第1部分:用原子吸收光譜法測定砷含量 |
(Starch and derived products - Heavy metals content - Part 1: Determination of arsenic content by atomic absorption spectrometry (ISO 11212-1:1997); German version EN ISO 11212-1:1997) |
| DIN EN ISO 11212-2-1997 |
淀粉和淀粉制品.重金屬含量.第2部分:用原子吸收光譜法測定汞含量 |
(Starch and derived products - Heavy metals content - Part 2: Determination of mercury content by atomic absorption spectrometry (ISO 11212-2:1997); German version EN ISO 11212-2:1997) |
| DIN EN ISO 11212-3-1997 |
淀粉和淀粉制品.重金屬含量.第3部分:用帶電熱原子分裂的原子吸收光譜法測定鉛含量 |
(Starch and derived products - Heavy metals content - Part 3: Determination of lead content by atomic absorption spectrometry with electrothermal atomization (ISO 11212-3:1997); German version EN ISO 11212-3:1997) |
| DIN EN ISO 11212-4-1997 |
淀粉和淀粉制品.重金屬含量.第4部分:用帶電熱原子分裂的原子吸收光譜法測定鎘含量 |
(Starch and derived products - Heavy metals content - Part 4: Determination of cadmium content by atomic absorption spectrometry with electrothermal atomization (ISO 11212-4:1997); German version EN ISO 11212-4:1997) |
| DIN EN ISO 11213-1995 |
淀粉和淀粉制品的檢驗.用酶催化法測定淀粉的乙�；暮� |
(Modified starch - Determination of acetyl content - Enzymatic method (IS0 11213:1995); German version EN ISO 11213:1995) |
| DIN EN ISO 11214-1996 |
改進的淀粉.氧化淀粉中羥基團含量的測定 |
(Modified starch - Determination of carboxyl group content of oxidized starch (ISO 11214:1996); German version EN ISO 11214:1996) |
| DIN EN ISO 11215-1998 |
改良淀粉.乙酰二淀粉己二酸酯中己二酸含量的測定.氣相色譜法 |
(Modified starch - Determination of adipic acid content of acetylated di-starch adipates - Gas-chromatographic method (ISO 11215:1998); German version EN ISO 11215:1998) |
| DIN EN ISO 11216-1998 |
改良淀粉.羧甲基淀粉中羧甲基團含量的測定 |
(Modified starch - Determination of content of carboxymethyl groups in carboxymethyl starch (ISO 11216:1998); German version EN ISO 11216:1998) |
| DIN EN ISO 11244-1999 |
牙科用釬焊包埋料 |
(Dental brazing investments (ISO 11244:1998); German version EN ISO 11244:1999) |
| DIN EN ISO 11245-2000 |
牙齒修復.磷酸鹽粘結耐火模鑄材料 |
(Dental restorations - Phosphate-bonded refractory die materials (ISO 11245:1999); German version EN ISO 11245:2000) |
| DIN EN ISO 11246-1999 |
牙科硅酸乙脂粘接鑄造包埋料 |
(Dental ethyl silicate bonded casting investments (ISO 11246:1996); German version EN ISO 11246:1998) |
| DIN EN ISO 11248-1999 |
塑料.熱塑材料.高溫下短期特性的評定 |
(Plastics - Thermosetting moulding materials - Evaluation of short-term performance at elevated temperatures (ISO 11248:1993); German version EN ISO 11248:1999) |
| DIN EN ISO 11254-1-2000 |
激光和激光相關設備.光學表面激光誘導損傷閾的測定.第1部分:1-on-1試驗 |
(Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 1: 1-on-1 test (ISO 11254-1:2000); German version EN ISO 11254-1:2000) |
| DIN EN ISO 11254-2-2002 |
激光和激光相關設備.光學表面激光誘導損傷閾的測定.第2部分:S-on-1試驗 |
(Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 2: S-on-1 test (ISO 11254-2:2001); German version EN ISO 11254-2:2001) |
| DIN EN ISO 1127-1997 |
不銹鋼管.尺寸,公差和單位長度的質量 |
(Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992); German version EN ISO 1127:1996) |
| DIN EN ISO 11290-1-1997 |
食品和動物飼料的微生物學.單核細胞增多性李司忒氏菌驗證和計數用水平法.第1部分:驗證方法 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of Listeria monocytogenes - Part 1: Detection method (ISO 11290-1:1996); German version EN ISO 11290-1:1996) |
| DIN EN ISO 11290-1-2005 |
食品和動物飼料的微生物學.單核細胞增生性利斯特氏菌檢測和計數的水平方法.第1部分:檢測方法 |
|
| DIN EN ISO 11290-2-1998 |
食品和動物飼料的微生物學.單核細胞增多性李司忒氏菌驗證和計數用水平法.第2部分:驗證方法 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of Listeria monocytogenes - Part 2: Enumeration method (ISO 11290-2:1998); German version EN ISO 11290-2:1998) |
| DIN EN ISO 11290-2-2005 |
食品和動物飼料的微生物學.單核細胞增生性利斯特氏菌檢測和計數的水平方法.第2部分:計數方法 |
|
| DIN EN ISO 11306-1998 |
金屬和合金的腐蝕.海水表面的金屬和合金的暴露和估算的指南 |
(Corrosion of metals and alloys - Guidelines for exposing and evaluating metals and alloys in surface sea water (ISO 11306:1998); German version EN ISO 11306:1998) |
| DIN EN ISO 1133-2000 |
塑料.熱塑性塑料的質量流率(MFR)和熔體流量率(MVR)的測定 |
(Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO 1133:1997); German version EN ISO 1133:1999) |
| DIN EN ISO 1133-2005 |
塑料.熱塑性塑料熔體質量流動速率(MFR)和熔體體積流動速率(MVR)的測定 |
|
| DIN EN ISO 11334-1-1997 |
用胳膊操作的助步器.要求和試驗方法.第1部分:肘支撐器 |
(Walking aids manipulated by one arm - Requirements and test methods - Part 1: Elbow crutches (ISO 11334-1:1994); German version EN ISO 11334-1:1997) |
| DIN EN ISO 11334-4-1999 |
用一只胳膊操作的助步器.要求和試驗方法.第4部分:具有三條或多于三條腿支撐的扶杖 |
(Walking aids manipulated by one arm - Requirements and test methods - Part 4: Walking sticks with three or more legs; German version EN ISO 11334-4:1999) |
| DIN EN ISO 11337-2004 |
塑料.聚酰胺.氣相色譜法測定ε-己內酰胺和ω-月桂酰 |
|
| DIN EN ISO 11341-1998 |
色漆和清漆.人工風蝕和人工輻射.由于濾化過的氙弧輻射產生的應力 |
(Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation (ISO 11341:1994); German version EN ISO 11341:1997) |
| DIN EN ISO 11341-2004 |
色漆和清漆.模擬氣候及模擬輻射曝曬.氙弧燈曝曬 |
|
| DIN EN ISO 11348-1-1999 |
水質.有關光發射水樣品的抑制效果的測定(發光細菌試驗).第1部分:使用新制備細菌法 |
(Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 1: Method using freshly prepared bacteria (ISO 11348-1:1998); German version EN ISO 11348-1:1998) |
| DIN EN ISO 11348-2-1999 |
水質.有關光發射水樣品的抑制效果的測定(發光細菌試驗).第2部分:使用液體干細菌法 |
(Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 2: Method using liquid-dried bacteria (ISO 11348-2:1998); German version EN ISO 11348-2:1998) |
| DIN EN ISO 11348-3-1999 |
水質.有關光發射水樣品的抑制效果的測定(發光細菌試驗).第2部分:使用凍干細菌法 |
(Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 3: Method using freeze-dried bacteria (ISO 11348-3:1998); German version EN ISO 11348-3:1998) |
| DIN EN ISO 11357-1-1997 |
塑料.差示掃描量熱法.第1部分.通用規則 |
(Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:1997); German version EN ISO 11357-1:1997) |
| DIN EN ISO 11358-1997 |
塑料.聚合物的熱重測定.一般規則 |
(Plastics - Thermogravimetry (TG) of polymers - General principles (ISO 11358:1997); German version EN ISO 11358:1997) |
| DIN EN ISO 11369-1997 |
水質.挑選出的植物處理劑的測定.固液提取后用UV探測的高分辨率液相色譜方法 |
(Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction (ISO 11369:1997); German version EN ISO 11369:1997) |
| DIN EN ISO 11376-2002 |
塑料.環氧樹脂和環氧丙基酯.無機氯的測定 |
(Plastics - Epoxy resins and glycidyl esters - Determination of inorganic chlorine (ISO 11376:1997); German version EN ISO 11376:2001) |
| DIN EN ISO 11378-2-2003 |
鋪地織物.實驗室污物試驗.第2部分:轉鼓試驗 |
(Textile floor coverings - Laboratory soiling tests - Part 2: Drum test (ISO 11378-2:2001); German version EN ISO 11378-2:2001) |
| DIN EN ISO 11380-1996 |
光學和光學儀器.眼科.鏡片樣板 |
(Optics and optical instruments - Ophthalmic optics - Formers (ISO 11380:1994); German version EN ISO 11380:1996) |
| DIN EN ISO 11381-1996 |
光學和光學儀器.眼科光學.螺紋 |
(Optics and optical instruments - Ophthalmic optics - Screw threads (ISO 11381:1994); German version EN ISO 11381:1996) |
| DIN EN ISO 11399-2001 |
熱環境的人類工效學.相關國際標準的原理和應用 |
(Ergonomics of the thermal environment - Principles and application of relevant international standards (ISO 11399:1995); German version EN ISO 11399:2000) |
| DIN EN ISO 11401-1998 |
塑料.酚醛樹脂.用液體色層分離法分離 |
(Plastics - Phenolic resins - Separation by liquid chromatography (ISO 11401:1993); German version EN ISO 11401:1998) |
| DIN EN ISO 11402-1998 |
塑料.縮聚樹脂.游離甲醛的測定 |
(Plastics - Condensation resins - Determination of free formaldehyde (ISO 11402:1993); German version EN ISO 11402:1998) |
| DIN EN ISO 11402-2005 |
酚醛樹脂、氨基樹脂和縮合樹脂.游離甲醛含量的測定 |
|
| DIN EN ISO 11403-1-2000 |
塑料.可比較多點數據的獲得和表示.第1部分:機械性能 |
(Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:1994); German version EN ISO 11403-1:1999) |
| DIN EN ISO 11403-2-2000 |
塑料.可比較多點數據的獲得和表示.第2部分:熱和加工性能 |
(Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:1995); German version EN ISO 11403-2:1999) |
| DIN EN ISO 11403-2-2004 |
塑料.可比多點數據的采集和表示.第2部分:熱性能和加工性能 |
|
| DIN EN ISO 11403-3-2002 |
塑料.可比較多點數據的采集和表示.第3部分:環境對特性的影響 |
(Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:1999); German version EN ISO 11403-3:2001) |
| DIN EN ISO 11409-1998 |
塑料.酚醛樹脂.用差別掃描量熱法測定反應熱和反應溫度 |
(Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry (ISO 11409:1993); German version EN ISO 11409:1998) |
| DIN EN ISO 11426-1999 |
金和金珠寶合金的測定.火吹法(火試驗法) |
(Determination of gold in gold jewellery alloys - Cupellation method (fire assay) (ISO 11426:1997); German version EN ISO 11426:1998) |
| DIN EN ISO 11431-2003 |
房屋建筑.連接件.受熱、水和透過玻璃的人造光照射后密封膠的粘合性的測定 |
(Building construction - Jointing products - Determination of adhesion/cohesion properties of saelants after exposure to heat, water and artificial light through glass (ISO 11431:2002); German version EN ISO 11431:2002) |
| DIN EN ISO 11432-1998 |
建筑結構.密封劑.抗壓特性測定 |
(Building construction - Sealants - Determination of resistance to compression (ISO 11432:1993); German version EN ISO 11432:1997) |
| DIN EN ISO 11432-2005 |
房屋建筑.密封膠.耐壓性測定 |
|
| DIN EN ISO 11439-2001 |
氣瓶.用作機動車燃料的天然氣的車上存儲用高壓氣瓶 |
(Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2000); German version EN ISO 11439:2000) |
| DIN EN ISO 11446-2004 |
道路車輛.牽引車和掛車間電氣連接用連接器.具有12V標稱電源電壓的車輛用13極連接器 |
|
| DIN EN ISO 11468-1999 |
塑料.檢驗用聚氯乙烯(PVC)糊劑的制備.溶液器法 |
(Plastics - Preparation of PVC pastes for test purposes - Dissolver method (ISO 11468:1997); German version EN ISO 11468:1999) |
| DIN EN ISO 11469-2000 |
塑料.塑料產品的通用識別和標記 |
(Plastics - Generic identification and marking of plastics products (ISO 11469:2000); German version EN ISO 11469:2000) |
| DIN EN ISO 11489-1995 |
鉑裝飾合金中鉑含量測定.用汞氯化學還原進行重力測定 |
(Determination of platinum in platinum jewellery alloys - Gravimetric method after reduction with mercury(I) chloride (ISO 11489:1995); German version EN ISO 11489:1995) |
| DIN EN ISO 11490-1995 |
鈀裝飾合金中鈀含量測定.用二甲基乙二肟進行重力測定 |
(Determination of palladium in palladium jewellery alloys - Gravimetric method with dimethyl glyoxime (ISO 11490:1995); German version EN ISO 11490:1995) |
| DIN EN ISO 11498-1999 |
牙科手持器械.牙科用低壓電動機 |
(Dental handpieces - Dental low-voltage electrical motors (ISO 11498:1997); German version EN ISO 11498:1999) |
| DIN EN ISO 11499-1999 |
局部麻醉牙管殼 |
(Dental cartridges for local anaesthetics (ISO 11499:1997); German version EN ISO 11499:1999) |
| DIN EN ISO 11501-2004 |
塑料.薄膜和薄板.加熱尺寸變化的測定 |
|
| DIN EN ISO 11502-2005 |
塑料.薄膜和薄板.阻尼力測定 |
|
| DIN EN ISO 11507-2002 |
涂料和清漆.涂層的人工風蝕.暴露于UV熒光和水 |
(Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV and water (ISO 11507:1997); German version EN ISO 11507:2001) |
| DIN EN ISO 11539-1999 |
眼科光學.接觸鏡片.接觸鏡片與接觸鏡片材料分類 |
(Ophthalmic optics - Contact lenses - Classification of contact lenses and contact lens materials (ISO 11539:1999); German version EN ISO 11539:1999) |
| DIN EN ISO 11541-2003 |
天然氣.高壓下含水量的測定 |
(Natural gas - Determination of water content at high pressure (ISO 11541:1997); German version EN ISO 11541:2002) |
| DIN EN ISO 11542-1-2002 |
塑料.超高分子量聚乙烯模塑和擠塑材料.第1部分:名稱與符號系統和基本規范 |
(Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 11542-1:2001); German version EN ISO 11542-1:2001) |
| DIN EN ISO 11542-2-1999 |
塑料.超高分子量聚乙烯模塑和擠制材料.第2部分:試樣制備和性能測定 |
(Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998); German version EN ISO 11542-2:1998) |
| DIN EN ISO 11543-2002 |
改良淀粉.羥丙含量測定.質子核磁共振(NMR)分光計 |
(Modified starch - Determination of hydroxypropyl content - Method using proton nuclear magnetic resonance (NMR) spectrometry (ISO 11543:2000); German version EN ISO 11543:2002) |
| DIN EN ISO 11545-2001 |
農業灌溉設備.有噴頭或噴霧咀的橫向移動排灌機械和中心軸.水分配均勻性的測定 |
(Agricultural irrigation equipment - Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles - Determination of uniformity of water distribution (ISO 11545:2001); German version EN ISO 11545:2001) |
| DIN EN ISO 11546-1-1996 |
聲學.密封罩隔聲性能的測定.第1部分:申報用實驗室條件下的測量 |
(Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995); German version EN ISO 11546-1:1995) |
| DIN EN ISO 11546-2-1996 |
聲學.密封罩隔聲性能的測定.第2部分:驗收和校驗部位的測量 |
(Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995); German version EN ISO 11546-2:1995) |
| DIN EN ISO 11547 Berichtigung 1-2001 |
DINENISO11547-1995的勘誤 |
(Corrigendum to DIN EN ISO 11547:1995 (German version EN ISO 11547/A1:2000)) |
| DIN EN ISO 11547-1995 |
小船.負載下起動前的保護 |
(Small craft - Start-in-gear protection (ISO 11547:1994); German version EN ISO 11547:1995) |
| DIN EN ISO 11551-1997 |
光學和光學儀器.激光和與激光相關的設備.光學激光組件光吸收性測試 |
(Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components (ISO 11551:1997); German version EN ISO 11551:1997) |
| DIN EN ISO 11551-2004 |
光學和光學儀器.激光和激光設備.光學激光組件光吸收性試驗方法 |
|
| DIN EN ISO 11553-1-2005 |
機械安全.激光加工機械.第1部分:一般安全要求 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com