標準號 |
中文名稱 |
英文名稱 |
| DIN ISO 11799-2005 |
信息和文獻工作.檔案和圖書館資料的文獻存儲要求 |
|
| DIN ISO 11825-1999 |
紡織機械及其配件.編織機用舌型針.針桿寬度和鉤針高度的調整 |
Textile machinery and accessories - Latch-type needles for knitting machines - Coordination of shank widths and hook heights (ISO 11825:1995) |
| DIN ISO 11843-1-2004 |
檢測能力.第1部分:術語和定義 |
|
| DIN ISO 1185-2002 |
道路車輛.24V電氣系統的牽引車輛和掛車之間的電氣連接裝置.24N(標準)型7極連接器 |
Road vehicles - Electrical connections between towing vehicles and towed vehicles with 24 V-systems - 7-pole connector type 24 N (normal) (ISO 1185:1997) |
| DIN ISO 11898-1995 |
道路車輛.數字信息交換.高速通信用局域網控制器 |
Road vehicles - Interchange of digital information - Controller area network (CAN) for high-speed communication; identical with ISO 11898:1993 (Status as of 1994) |
| DIN ISO 11901-1-1996 |
壓力工具.氣壓彈簧.第1部分:總規范 |
Tools for pressing - Gas springs - Part 1: General specifications (ISO 11901-1:1995) |
| DIN ISO 11901-1-2005 |
沖壓工具.氣壓彈簧.第1部分:一般規范 |
|
| DIN ISO 11901-2-1996 |
壓力工具.氣壓彈簧.第2部分:附件規范 |
Tools for pressing - Gas springs - Part 2: Specification of accessories (ISO 11901-2:1995) |
| DIN ISO 11901-2-2005 |
沖壓工具.氣壓彈簧.第2部分:附件規范 |
|
| DIN ISO 11903-2004 |
沖壓工具.導柱裝置 |
|
| DIN ISO 11906-2000 |
縮微攝影.縮微膠片系列.操作過程 |
Micrographics - Microfilming of serials - Operating procedures (ISO 11906:1999) |
| DIN ISO 1204-1994 |
往復式內燃機.旋轉方向的規定 |
Reciprocating internal combustion engines - Designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine |
| DIN ISO 12040-1998 |
印刷技術.印刷和印刷油墨.使用過濾氙弧燈評價色牢度 |
Graphic technology - Prints and printing inks - Assessment of light fastness using filtered xenon arc light (ISO 12040:1997) |
| DIN ISO 12098-2000 |
有24V電壓系統的商用車輛.牽引車和掛車間的15桿連接器.尺寸和觸點的分配 |
Commercial vehicles with 24 V systems - 15-pole connectors between towing vehicles and trailers - Dimensions and contact allocation (ISO 12098:1994) |
| DIN ISO 12124-2002 |
助聽器真耳聲學特性測量程序 |
Procedures for the measurement of real-ear acoustical characteristics of hearing aids (ISO 12124:2001) |
| DIN ISO 12128-1998 |
滑動軸承.潤滑孔,潤滑槽和潤滑襯套.軸承套的尺寸,類型,標識以及應用 |
Plain bearings - Lubrication holes, grooves and pockets - Dimensions, types, designation and their application to bearing bushes; Identical with ISO 12128:1995 |
| DIN ISO 12132-2000 |
滑動軸承.薄壁半軸承的質量保證.設計FMEA |
Plain bearings - Quality assurance of thin-walled half-bearings - Design FMEA (ISO 12132:1999) |
| DIN ISO 12145-1999 |
電阻焊接設備.點焊電極的安裝角度 |
Resistance welding equipment - Angles for mounting spot welding electrodes (ISO 12145:1998) |
| DIN ISO 12151-2-2004 |
液壓傳動和通用連接件.軟管接頭.第2部分:帶ISO8434-1和8434-4O形圈24錐形連接件末端的軟管接頭 |
(Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 and 8434-4 24?cone connector ends with O-rings (ISO 12151-2:2003)) |
| DIN ISO 12151-2-2004 |
液壓傳動和通用連接件.軟管接頭.第2部分:帶ISO 8434-1和8434-4 24°錐形連接件末端和O形圈的軟管接頭 |
|
| DIN ISO 12151-3-2004 |
液壓傳動和通用連接件.軟管接頭.第3部分:帶ISO6162法蘭末端的軟管接頭 |
(Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162 flange ends (ISO 12151-3:1999)) |
| DIN ISO 12151-3-2004 |
液壓傳動和通用連接件.軟管接頭.第3部分:帶ISO 6162法蘭末端的軟管接頭 |
|
| DIN ISO 12156-1-1999 |
柴油燃料.高頻度往復設備(HFRR)用潤滑劑性能評定.第1部分:試驗方法 |
Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:1997) |
| DIN ISO 12165-2002 |
模塑工具.壓模和注塑模及壓塑模件.術語和符號 |
Tools for moulding - Components of compression and injection moulds and diecasting dies - Terms and symbols (ISO 12165:2000) |
| DIN ISO 1219-1-1996 |
液壓傳動系統和部件.圖形符號和線路圖.第1部分:圖形符號 |
Fluid power systems and components - Graphic symbols and circuit diagrams - Part 1: Graphic symbols (ISO 1219-1:1991) |
| DIN ISO 1219-2-1996 |
液壓傳動系統和部件.圖形符號和線路圖.第2部分:線路圖 |
Fluid power systems and components - Graphic symbols and circuit diagrams - Part 2: Circuit diagrams (ISO 1219-2:1995) |
| DIN ISO 12238-2005 |
液壓傳動.方向控制閥門.移動時間測量(ISO 12238-2001) |
|
| DIN ISO 12240-1-1999 |
關節軸承.第1部分:徑向關節軸承 |
Spherical plain bearing - Part 1: Spherical plain radial bearings (ISO 12240-1:1998) |
| DIN ISO 12240-2-1999 |
關節軸承.第2部分:角面接觸徑向關節軸承 |
Spherical plain bearing - Part 2: Angular contact spherical plain radial bearings (ISO 12240-2:1998) |
| DIN ISO 12240-3-1999 |
關節軸承.第3部分:止推徑向關節軸承 |
Spherical plain bearing - Part 3: Thrust spherical plain (ISO 12240-3:1998) |
| DIN ISO 12240-4-1999 |
關節軸承.第4部分:徑向關節軸承桿端 |
Spherical plain bearing - Part 4: Spherical plain bearing rod ends (ISO 12240-4:1998) |
| DIN ISO 1227-1987 |
淀粉.含有衍生物和副產物的淀粉.術語 |
Starch, including derivatives and by-products; vocabulary; identical with ISO 1227, edition 1979 |
| DIN ISO 123-2002 |
橡膠膠乳的取樣 |
Rubber latex - Sampling (ISO 123:2001) |
| DIN ISO 12301-1995 |
滑動軸承.幾何特性和材料質量特性的質量控制技術和檢驗 |
Plain bearings - Quality control techniques and inspection of geometrical and material quality characteristics; identical with ISO 12301:1992 |
| DIN ISO 12302-1998 |
滑動軸承.質量特性.SPC(統計過程控制) |
Plain bearings - Quality characteristics - Statistical process control (SPC) (ISO 12302:1993) |
| DIN ISO 12303-1998 |
滑滾動軸承.質量特性.機加工能力的計算 |
Plain bearings - Quality characteristics - Calculation of machine and process capabilities (ISO 12303:1995) |
| DIN ISO 12306-1998 |
滑動軸承.測量薄壁軸承套和薄壁卡箍的厚度 |
Plain bearings - Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes (ISO 12306:1994) |
| DIN ISO 12307-1-1998 |
滑動軸承.卷制的襯套.第1部分:外徑檢驗 |
Plain bearings - Wrapped bushes - Part 1: Checking the outside diameter (ISO 12307-1:1994) |
| DIN ISO 12307-2-2001 |
滑動軸承.卷制襯套的檢驗.第2部分:內徑檢驗 |
Plain bearings - Checking of wrapped bushes - Part 2: Checking the inside diameter (ISO 12307-2:2000) |
| DIN ISO 12308-1998 |
滑動軸承.質量保證.樣品類型.定義.應用和檢驗 |
Plain bearings - Quality assurance - Sample types; definitions, applications and testing (ISO 12308:1994) |
| DIN ISO 125-1993 |
天然橡膠膠乳.含堿量測定 |
Natural rubber latex concentrate; determination of alkalinity; identical with ISO 125:1990 |
| DIN ISO 126-1999 |
天然橡膠膠乳濃縮物.干膠含量的測定 |
Latex, rubber, natural concentrate - Determination of dry rubber content (ISO 126:1995) |
| DIN ISO 12647-1-1998 |
制圖技術.半調色分離,試印和出版印刷的生產過程控制.第1部分:參數和測量方法 |
Graphic technology - Process control for the manufacture of half-tone colour separations, proof and production prints - Part 1: Parameters and measurement methods (ISO 12647-1:1996) |
| DIN ISO 12647-2-1998 |
制圖技術.半調色分離,試印和出版印刷的生產過程控制.第2部分:膠版印刷法 |
Graphic technology - Process control for the manufacture of half-tone colour separations, proof and production prints - Part 2: Offset lithographic processes (ISO 12647-2:1996) |
| DIN ISO 12647-3-2000 |
制圖技術.半色調分離、樣張和正式印刷品的生產過程控制.第3部分:新聞紙上的冷排膠版印刷和凸版印刷 |
Graphic technology - Process control for the manufacture of half-tone colour separations, proofs and production prints - Part 3: Coldset offset lithography and letterpress on newsprint (ISO 12647-3:1998) |
| DIN ISO 12667-1995 |
載重車和公交車.T型交叉嚙合萬向軸法蘭 |
Commercial vehicles and buses - Cross-tooth propeller shaft flanges, type T (ISO 12667:1993) |
| DIN ISO 1269-1988 |
塑料.氯乙烯的均聚物和共聚物樹脂.揮發性物質(包括水)的測定 |
Plastics; homopolymer and copolymer resins of vinylchloride; determination of volatile matter (including water); identical with ISO 1269, edition 1980 |
| DIN ISO 127-1999 |
天然橡膠膠乳濃縮物.KOH數的測定 |
Rubber, natural latex concentrate - Determination of KOH number (ISO 127:1995) |
| DIN ISO 12756-1999 |
繪圖與書寫儀器.圓珠筆和簽字筆.詞匯 |
Drawing and writing instruments - Ball point pens and roller ball pens - Vocabulary (ISO 12756:1998) |
| DIN ISO 12757-1-1999 |
園珠筆及其筆芯.第1部分:一般應用 |
Ball point pens and refills - Part 1: General use (ISO 12757-1:1998) |
| DIN ISO 12757-2-1999 |
圓珠筆和筆芯.第2部分:文件用途 |
Ball point pens and refills - Part 2: Documentary use (DOC) (ISO 12757-2:1998) |
| DIN ISO 128-1-2003 |
技術圖紙.圖形表示的一般原則.第1部分:前言和索引 |
(Technical drawings - General principles of presentation - Part 1: Introduction and index (ISO 128-1:2003)) |
| DIN ISO 128-22-1999 |
技術制圖.展示的一般規則.第22部分:標題線和參考線的慣例和應用 |
Technical drawings - General principles of presentation - Part 22: Basic conventions and applications for leader lines and reference lines (ISO 128-22:1999) |
| DIN ISO 128-23-2000 |
技術制圖.圖示的一般原理.第23部分:有關建筑圖紙的直線 |
Technical drawings - General principles of presentation - Part 23: Lines on construction drawings (ISO 128-23:1999) |
| DIN ISO 128-24-1999 |
技術制圖.表示的一般原則.第24部分:機械工程制圖線 |
Technical drawings - General principles of presentation - Part 24: Lines on mechanical engineering drawings (ISO 128-24:1999) |
| DIN ISO 128-25-2000 |
技術繪圖.圖示的一般原理.第25部分:造船繪圖線條 |
Technical drawings - General principles of presentation - Part 25: Lines on shipbuilding drawings (ISO 128-25:1999) |
| DIN ISO 128-30-2002 |
技術制圖.畫法的一般原則.第30部分:視圖的基本慣例 |
Technical drawings - General principles of presentation - Part 30: Basic conventions for views (ISO 128-30:2001) |
| DIN ISO 128-34-2002 |
技術制圖.畫法的一般原則.第34部分:機械工程圖的視圖 |
Technical drawings - General principles of presentation - Part 34: Views on mechanical engineering drawings (ISO 128-34:2001) |
| DIN ISO 128-40-2002 |
技術制圖.畫法的一般原則.第40部分:切面圖和剖面圖的基本慣例 |
Technical drawings - General principles of presentation - Part 40: Basic conventions for cuts and sections (ISO 128-40:2001) |
| DIN ISO 128-44-2002 |
技術制圖.畫法的一般原則.第44部分:機械工程圖的剖面圖 |
Technical drawings - General principles of presentation - Part 44: Sections on mechanical engineering drawings (ISO 128-44:2001) |
| DIN ISO 128-50-2002 |
技術制圖.畫法的一般原則.第50部分:切面圖和剖面圖表示區域的基本慣例 |
Technical drawings - General principles of presentation - Part 50: Basic conventions for representing areas on cuts and sections (ISO 128-50:2001) |
| DIN ISO 12853-2005 |
光學和光學儀器.顯微鏡.提供給用戶的信息 |
|
| DIN ISO 12884-2000 |
環境空氣.總(氣相和粒子相)多環芳香烴的測定.用氣相色譜法或質譜分析法收集過濾器背上的吸附劑 |
Ambient air - Determination of total (gas and particle phase) polycyclic aromatic hydrocarbons - Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analysis (ISO 12884:2000) |
| DIN ISO 13012-1999 |
套筒式線性運動循環滾珠滾動軸承.附件 |
Rolling bearings - Linear motion, recirculating ball, sleeve type - Accessories (ISO 13012:1998) |
| DIN ISO 1306-2004 |
橡膠配合劑.炭黑(造粒).傾注密度的測定 |
|
| DIN ISO 132-2004 |
硫化或熱塑性橡膠.撓裂和裂痕增長的測定 |
|
| DIN ISO 13276-2003 |
煙草和煙草制品.煙堿純度的測定.使用鎢硅酸的重量分析法 |
(Tobacco and tobacco products - Determination of nicotine purity - Gravimetric method using tungstosilicic acid (ISO 13276:1997)) |
| DIN ISO 13321-2004 |
粒度分析.相關光子光譜學 |
|
| DIN ISO 13331-1996 |
道路車輛.摩托車燃料箱的開口和注油管.氣體回收系統 |
Road vehicles - Filler pipes and openings of motor vehicle fuel tanks - Vapour recovery system (ISO 13331:1995) |
| DIN ISO 13359-1998 |
封閉式管道中液體流量測量.帶法蘭盤的磁感應流量測量器.安裝長度 |
Measurement of conductive liquid flow in closed conduits - Flanged-type electromagnetic flowmeters - Overall length (ISO 13359:1998) |
| DIN ISO 13373-1-2002 |
條件監測和機械診斷.振動條件監測.第1部分:一般程序 |
Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 1: General procedures (ISO 13373-1:2002) |
| DIN ISO 13440-1999 |
拖拉機和農業機械.農作物防護設備.殘留量測定 |
Agricultural machinery and tractors - Equipment for crop protection - Agricultural sprayers; test method for determination of volume of residues (ISO 13440:1996) |
| DIN ISO 13472-1-2004 |
聲學.現場路面吸聲特性的測量.第1部分:擴展表面法 |
|
| DIN ISO 13473-2-2004 |
使用表面外觀表征路面結構.第2部分:與路面結構外觀分析相關的術語和基本要求 |
|
| DIN ISO 13473-3-2004 |
用表面外觀表征路面結構.第3部分:輪廓測定儀的規范和分類 |
|
| DIN ISO 13536-1997 |
土壤質量.PH值為8.1時利用氯化鋇緩沖溶液對可交換陽離子和潛在的陽離子交換能力的測定 |
Soil quality - Determination of thepotential cation exchange capacity and exchangeable cations using barium chloride solution buffered at pH = 8,1 (ISO 13536:1995) |
| DIN ISO 13542-1998 |
紙和紙板.硬紙板錐形圓筒內徑 |
Paper and board - Specification for internal diameters of cores for reels (ISO 13542:1995) |
| DIN ISO 13552-1995 |
紡織機械和附件.卷布輥.卷布軸更換自動化的連接尺寸 |
Textile machinery and accessories - Cloth rollers - Specification for connections for automation of roller changing (ISO 13552:1994) |
| DIN ISO 13553-1995 |
紡織機械和附件.織軸.經軸更換自動化的連接尺寸 |
Textile machinery and accessories - Weaver`s beams - Specification for connections for automation of beam changing (ISO 13553:1994) |
| DIN ISO 13567 Bb.1-2000 |
技術產品文件.CAD層的組織和命名.第3部分:ISO 13567-1和ISO-13567-2的應用 |
Technical product documentation - Organization and naming of layers for CAD - Application of ISO 13567-1 and ISO 13567-2 (ISO/TR 13567-3:1999) |
| DIN ISO 13655-2000 |
制圖技術.制圖藝術成像用光譜測量和比色計算 |
Graphic technology - Spectral measurement and colorimetric computation for graphic arts images (ISO 13655:1996) |
| DIN ISO 13715-2000 |
技術制圖.未定義形狀的邊緣.詞匯和制圖說明 |
Technical drawings - Edges of undefined shape - Vocabulary and indication on drawings (ISO 13715:2000) |
| DIN ISO 13720-1998 |
肉和肉制品.假單胞菌spp.的計數 |
Meat and meat products - Enumeration of Pseudomonas spp. (ISO 13720:1995) |
| DIN ISO 13741-1-2003 |
塑料/橡膠.聚合物分散體和橡膠膠乳(天然的和合成的).用毛細管柱氣相色譜法測定殘留單體和其他有機成分.第1部分:直接液體注射法 |
Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic); Determination of residual monomers and other organic components by capillary-column gas chromatography - Part 1: Direct liquid injection method (ISO 13741-1:1998) |
| DIN ISO 13741-2-2003 |
塑料/橡膠.聚合物分散體和橡膠膠乳(天然的和合成的).用毛細管柱氣相色譜法測定殘留單體和其他有機成分.第2部分:頂空法 |
Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic); Determination of residual monomers and other organic components by capillary-column gas chromatography - Part 2: Headspace method (ISO 13741-2:1998) |
| DIN ISO 13752-1999 |
空氣質量.采用作為基準的第2種測量方法在現場條件下測量方法的不確定性的評估 |
Air quality - Assessment of the uncertainty of a measurement method under field conditions using a second method as reference (ISO 13752:1998) |
| DIN ISO 13754-2000 |
紡織機械和附件.抽紗和經紗紡錘用六角螺母和槽頂螺母 |
Textiles machinery and accessories - Hexagon nuts and slotted nuts for spinning and twisting spindles (ISO 13754:1999) |
| DIN ISO 13773-2000 |
橡膠.聚氯丁膠乳.含堿量的測定 |
Rubber - Polychloroprene latex - Determination of alkalinity (ISO 13773:1997) |
| DIN ISO 13778-2000 |
滑動軸承.薄壁半軸承的質量保證.達到窄間隙區域的軸承的選擇組件 |
Plain bearings - Quality assurance of thin-walled half bearings - Selective assembly of bearings to achieve a narrow clearance range (ISO 13778:1999) |
| DIN ISO 13804-2000 |
鋁用玻璃和瓷漆.試驗樣品的生產 |
Vitreous and porcelain enamels for aluminium - Production of specimens for testing (ISO 13804:1999) |
| DIN ISO 13805-2000 |
鋁用釉層和瓷漆.在電解溶液的作用下鋁上瓷漆粘合的測定. |
Vitreous and porcelain enamels for aluminium - Determination of the adhesion of enamels on aluminium by means of electrolytic solution (spall test) (ISO 13805:1999) |
| DIN ISO 13807-2001 |
釉層和瓷漆層.化學工業用瓷釉在熱沖擊試驗中斷裂形成溫度的測定 |
Vitreous and porcelain enamels - Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry (ISO 13807:1999); Technical Corrigendum 1:2000 |
| DIN ISO 13877-2000 |
土壤質量.多核芳香烴類的測定.高效液相色譜法 |
Soil quality - Determination of polynuclear aromatic hydrocarbons - Method using high-performance liquid chromatographic (ISO 13877:1998) |
| DIN ISO 13878-1998 |
土壤質量.用干燒法測定總氮含量(素分析) |
Soil quality - Determination of total nitrogen content by dry combustion (elemental analysis) (ISO 13878:1998) |
| DIN ISO 13926-1-1998 |
針頭系列.第1部分:醫用胰島素注射器針頭用玻璃圓柱形管 |
Pen systems - Part 1: Glass cylinders for pen-injectors for medical use (ISO 13926-1:1998) |
| DIN ISO 13926-1-2005 |
針頭系列.第1部分:醫用針頭注射器用玻璃套筒 |
|
| DIN ISO 13926-2-2000 |
針頭系列.第2部分:醫用針頭注射器的柱塞和園盤 |
Pen systems - Part 2: Plungers and discs for pen-injectors for medical use (ISO 13926-2:1999) |
| DIN ISO 13942-2001 |
粘合磨料產品.限制偏差和跳動誤差 |
Bonded abrasive products - Limit deviations and run-out tolerances (ISO 13942:2000) |
| DIN ISO 13944-1998 |
潤滑金屬粉末混合物.潤滑物含量測定.改良的索格利特(提取器)萃取法 |
Lubricated metallic powder mixes - Determination of lubricant content - Modified Soxhlet extraction method (ISO 13944:1996) |
| DIN ISO 13964-1999 |
空氣質量.環境空氣中臭氧含量測定.紫外線光度計法 |
Air quality - Determination of ozone in ambient air - Ultraviolet photometric method (ISO 13964:1998) |
| DIN ISO 13992-1997 |
高山旅游滑雪用滑雪板的帶扣.安全技術要求和檢驗 |
Alpine touring ski-bindings - Safety requirements and test methods (ISO 13992:1997) |
| DIN ISO 13993-2002 |
滑雪設備租賃商店實施規范.租賃設施中完整和不完整高山滑雪裝配靴設備的取樣和檢驗 |
Rental ski shop practice - Sampling and inspection of complete and incomplete alpine ski-binding-boot systems in rental applications (ISO 13993:2001) |
| DIN ISO 14-1986 |
內定心的直邊花鍵軸.尺寸.公差和檢驗 |
(Straigth-sided splines for cylindrical shafts with internal centering; dimensions, tolerances and verification; identical with ISO 14, edition 1982) |
| DIN ISO 14004-1998 |
環境管理系統.原理,系統,輔助裝置的一般導則 |
Environmental management systems - General guidelines on principles, systems and supporting techniques (ISO 14004:1996); German version ISO 14004:1997 |
| DIN ISO 14004-2005 |
環境管理體系.原理、體系與支持技術一般指南 |
|
| DIN ISO 14004-2005 |
環境管理體系.原理、體系與支持技術一般指南 |
|
| DIN ISO 1409-1999 |
塑料/橡膠.聚合物的含水分散體和橡膠膠乳(天然的和合成的).用環形法測定表面張力 |
Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic) - Determination of surface tension by the ring method (ISO 1409:1995) |
| DIN ISO 141-1978 |
紡織機械和輔助裝置.卷緯機和交叉卷繞絡筒機.左后側的定義 |
Textile Machinery and Accessories; Pirn Winders and Cross Winders, Definition of Left and Right Sides |
| DIN ISO 14135-1-2005 |
光學和光學儀器.望遠鏡瞄準具規范.第1部分:通用儀器 |
|
| DIN ISO 14135-1-2005 |
光學和光學儀器.望遠鏡瞄準具規范.第1部分:通用儀器 |
|
| DIN ISO 14135-2-2005 |
光學和光學儀器.望遠鏡瞄準具規范.第2部分:高性能儀器 |
|
| DIN ISO 14135-2-2005 |
光學和光學儀器.望遠鏡瞄準具規范.第2部分:高性能儀器 |
|
| DIN ISO 14145-1-1999 |
園珠筆及其筆芯.第1部分:一般用途 |
Roller ball pens and refills - Part 1: General use (ISO 14145-1:1998) |
| DIN ISO 14145-2-1999 |
園珠筆及其筆芯.第2部分:公文寫作用 |
(Roller ball pens and refills - Part 2: Documentary use (DOC) (ISO 14145-2:1998)) |
| DIN ISO 14154-2005 |
土質.一些選定的氯苯酚的測定.電子俘獲檢測的氣相色譜法 |
|
| DIN ISO 142-1978 |
紡織機械和輔助裝置.織造準備機械.左右側的定義 |
(Textile Machinery and Accessories; Weaving Preparatory Machines, Definition of Left and Right Sides) |
| DIN ISO 14238-1999 |
土壤質量.生物檢測法.土壤中氮礦化性和氮化合性的測定和制藥方法對土壤的影響 |
(Soil quality - Biological methods - Determination of nitrogen mineralization and nitrification in soils and the influence of chemicals on these processes (ISO 14238:1997)) |
| DIN ISO 14239-1999 |
土壤質量.在需氧條件下土壤中有機化合物礦化的測量用實驗室孕育系統 |
(Soil quality - Laboratory incubation systems for measuring the mineralization of organic chemicals in soil under aerobic conditions (ISO 14239:1997)) |
| DIN ISO 14240-1-1999 |
土壤質量.土壤微生物生物量的測定.第1部分:地層誘發呼吸法 |
Soil quality - Determination of soil microbial biomass - Part 1: Substrate-induced respiration method (ISO 14240-1:1997) |
| DIN ISO 14240-2-1999 |
土壤質量.土壤微生物生物量的測定.第2部分:熏煙萃取法 |
Soil quality - Determination of soil microbial biomass - Part 2: Fumigation-extraction method (ISO 14240-2:1997) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com