標準號 |
中文名稱 |
英文名稱 |
| ISO 15087-4-2000 |
牙科起子.第4部分:COUPLAND起子 |
Dental elevators - Part 4: Coupland elevators |
| ISO 15087-5-2000 |
牙科起子.第5部分:BEIN起子 |
Dental elevators - Part 5: Bein elevators |
| ISO 15087-6-2000 |
牙科起子.第6部分:FLOHR起子 |
Dental elevators - Part 6: Flohr elevators |
| ISO 15089-2000 |
水質.測定植物處理和殺蟲劑用選擇性的免疫測定導則 |
Water quality - Guidelines for selective immunoassays for the determination of plant treatment and pesticide agents |
| ISO 1509-1973 |
飛機的一般用途推拉式三極斷路器.性能要求 |
General purpose push-pull three-pole circuit-breakers for aircraft; Performance requirements |
| ISO 15098-1-1999 |
牙科鑷子.第1部分:一般要求 |
Dental tweezers - Part 1: General requirements |
| ISO 15098-2-2000 |
牙科鑷子.第2部分:Meriam型 |
Dental tweezers - Part 2: Meriam types |
| ISO 15098-3-2000 |
牙科鑷子.第3部分:學院型 |
Dental tweezers - Part 3: College types |
| ISO 15099-2003 |
門、窗和遮蔽裝置的熱性能.詳細計算 |
(Thermal performance of windows, doors and shading devices - Detailed calculations) |
| ISO 15099-2003 |
門、窗和遮蔽裝置的熱性能.詳細計算 |
|
| ISO 15100-2000 |
塑料.增強纖維.短切原絲.松密度的測定 |
Plastics - Reinforcement fibres - Chopped strands; Determination of bulk density |
| ISO 15103-1-2000 |
塑料.聚亞苯基乙醚(PPE)模塑和擠制材料.第1部分:名稱與符號系統和基本規范 |
Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 1: Designation system and basis for specifications |
| ISO 15103-2-2000 |
塑料.聚亞苯基乙醚(PPE)模塑和擠制材料.第2部分:試樣制備和性能測定 |
Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties |
| ISO 15105-1-2002 |
塑料.薄膜和薄板.氣體傳輸率的測定.第1部分:壓差法 |
Plastics; Film and sheeting - Determination of gas transmission rate - Part 1: Differential-pressure method |
| ISO 15105-2-2003 |
塑料.薄膜和薄板.氣體傳輸率的測定.第2部分:等壓法 |
Plastics - Film and sheeting - Determination of gas transmission rate - Part 2: Equal-pressure method |
| ISO 15105-2-2003 |
塑料.薄膜和薄板.氣體傳輸率的測定.第2部分:等壓法 |
|
| ISO 15106-1-2003 |
塑料.薄膜和薄片.水蒸氣傳輸率的測定.第1部分:濕度探測傳感器法 |
Plastics; Film and sheeting - Determination of water vapour transmission rate - Part 1: Humidity detection sensor method |
| ISO 15106-1-2003 |
塑料.薄膜和薄片.水蒸氣傳輸率的測定.第1部分:濕度探測傳感器法 |
|
| ISO 15106-1-2003 |
塑料.薄膜和薄片.水蒸氣傳輸率的測定.第1部分:濕度探測傳感器法 |
|
| ISO 15106-1-2003 |
塑料.薄膜和薄片.水蒸氣傳輸率的測定.第1部分:濕度探測傳感器法 |
|
| ISO 15106-2-2003 |
塑料.薄膜和薄片.水蒸氣傳輸率的測定.第2部分:紅外探測傳感器法 |
Plastics; Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method |
| ISO 15106-2-2003 |
塑料.薄膜和薄片.水蒸氣傳輸率的測定.第2部分:紅外探測傳感器法 |
|
| ISO 15106-2-2003 |
塑料.薄膜和薄片.水蒸氣傳輸率的測定.第2部分:紅外探測傳感器法 |
|
| ISO 15106-2-2003 |
塑料.薄膜和薄片.水蒸氣傳輸率的測定.第2部分:紅外探測傳感器法 |
|
| ISO 15106-3-2003 |
塑料.薄膜和薄片.水蒸氣傳輸率的測定.第3部分:電解探測傳感器法 |
Plastics; Film and sheeting - Determination of water vapour transmission rate - Part 3: Electrolytic detection sensor method |
| ISO 15106-3-2003 |
塑料.薄膜和薄片.水蒸氣傳輸率的測定.第3部分:電解探測傳感器法 |
|
| ISO 15106-3-2003 |
塑料.薄膜和薄片.水蒸氣傳輸率的測定.第3部分:電解探測傳感器法 |
|
| ISO 15106-3-2003 |
塑料.薄膜和薄片.水蒸氣傳輸率的測定.第3部分:電解探測傳感器法 |
|
| ISO 15107-1998 |
膠粘劑.膠粘連接抗裂強度的測定 |
Adhesives - Determination of cleavage strength of bonded joints |
| ISO 15108-1998 |
膠粘劑.用彎曲剪切法測定膠粘連接處的強度 |
Adhesives - Determination of strength of bonded joints using a bending-shear method |
| ISO 15109-1998 |
膠粘劑.靜負荷狀態下膠粘連接處斷裂時間的測定 |
Adhesives - Determination of the time to rupture of bonded joints under static load |
| ISO 15113 Technical Corrigendum 1-2001 |
橡膠.摩擦特性的測定.技術勘誤1 |
Rubber - Determination of frictional properties; Technical Corrigendum 1 |
| ISO 15113-1999 |
橡膠.摩擦特性的測定 |
Rubber - Determination of frictional properties |
| ISO 15117-1-2004 |
煤流動性.第1部分:料斗抖動 |
|
| ISO 15119-2000 |
包裝.袋.已填充袋摩擦系數的測定 |
Packaging - Sacks - Determination of the friction of filled sacks |
| ISO 1513 Technical Corrigendum 1-1994 |
色漆和清漆.試驗樣品的檢驗和制備.技術勘誤1 |
Paints and varnishes; examination and preparation of samples for testing; technical corrigendum 1 |
| ISO 1513-1992 |
色漆和清漆.試驗樣品的檢驗和制備 |
Paints and varnishes; examination and preparation of samples for testing |
| ISO 15136-1-2001 |
石油和天然氣工業的鉆孔設備.人工升降梯的空腔泵系統.第1部分:泵 |
Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps |
| ISO 15138 Technical Corrigendum 1-2001 |
石油和天然氣工業.近海生產裝置.加熱,通風和空調.技術勘誤1 |
Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning; Technical Corrigendum 1 |
| ISO 15138-2000 |
石油和天然氣工業.海上生產設備.加熱、通風和空調設備 |
Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning |
| ISO 1514-1993 |
涂料和清漆.試驗用標準樣板 |
Paints and varnishes; standard panels for testing |
| ISO 1514-2004 |
色漆和清漆.試驗用標準樣板 |
|
| ISO 15141-1-1998 |
食品.谷類作物和谷類作物產品中赭曲霉素A的測定.第1部分:硅膠凈化高效液體色譜法 |
Foodstuffs - Determination of ochratoxin A in cereals and cereal products - Part 1: High performance liquid chromatographic method with silica gel clean up |
| ISO 15141-2-1998 |
食品.谷類作物和谷類作物產品中赭曲霉素A的測定.第2部分:重碳酸鹽凈化高效液體色譜法 |
Foodstuffs - Determination of ochratoxin A in cereals and cereal products - Part 2: High performance liquid chromatographic method with bicarbonate clean up |
| ISO 15142-1-2003 |
外科植入物.骨髓腔內插金屬釘系統.第1部分:骨髓腔內插釘 |
(Implants for surgery - Metal intramedullary nailing systems - Part 1: Intramedullary nails) |
| ISO 15142-1-2003 |
外科植入物.骨髓腔內插金屬釘系統.第1部分:骨髓腔內插釘 |
|
| ISO 15142-2-2003 |
外科植入物.骨髓腔內插金屬釘系統.第2部分:鎖緊部件 |
(Implants for surgery - Metal intramedullary nailing systems - Part 2: Locking components) |
| ISO 15142-2-2003 |
外科植入物.骨髓腔內插金屬釘系統.第2部分:鎖緊部件 |
|
| ISO 15142-3-2003 |
外科植入物.骨髓腔內插金屬釘系統.第3部分:連接裝置和擴孔鉆直徑測量 |
(Implants for surgery - Metal intramedullary nailing systems - Part 3: Connection devices and reamer diameter measurements) |
| ISO 15142-3-2003 |
外科植入物.骨髓腔內插金屬釘系統.第3部分:連接裝置和擴孔鉆直徑測量 |
|
| ISO 15147-1999 |
輕傳輸帶.切割輕傳輸帶的寬度和長度公差 |
Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts |
| ISO 15148-2002 |
建筑材料和產品的溫濕性能.部分浸入法測定吸水系數 |
Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion |
| ISO 15152-2003 |
煙草.作為煙堿的總生物堿含量的測定.連續流分析法 |
(Tobacco - Determination of the content of total alkaloids as nicotine - Continuous-flow analysis method) |
| ISO 15152-2003 |
煙草.作為煙堿的總生物堿含量的測定.連續流分析法 |
|
| ISO 15153-2003 |
煙草.還原物質含量的測定.連續流分析法 |
(Tobacco - Determination of the content of reducing substances - Continuous-flow analysis method) |
| ISO 15153-2003 |
煙草.還原物質含量的測定.連續流分析法 |
|
| ISO 15154-2003 |
煙草.還原的碳水化合物含量的測定.連續流分析法 |
(Tobacco - Determination of the content of reducing carbohydrates - Continuous-flow analysis method) |
| ISO 15154-2003 |
煙草.還原的碳水化合物含量的測定.連續流分析法 |
|
| ISO 15156-1-2001 |
石油和天然氣工業.在石油和天然氣生產中用于含HS環境的材料.第1部分:耐裂材料選擇的一般原則 |
Petroleum and natural gas industries - Materials for use in HS-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials |
| ISO 15156-2-2003 |
石油和天然氣工業.油、氣生產中含硫化氫(H2S)環境下使用的材料.第2部分:耐裂化碳和低合金鋼及鑄鐵的使用 |
|
| ISO 15156-2-2003 |
石油和天然氣工業.油、氣生產中含硫化氫(H2S)環境下使用的材料.第2部分:耐裂化碳和低合金鋼及鑄鐵的使用 |
|
| ISO 15156-3-2003 |
石油和天然氣工業.油、氣生產中含硫化氫(H2S)環境下使用的材料.第3部分:耐裂化CRAs(耐腐蝕合金)和其他合金 |
|
| ISO 15156-3-2003 |
石油和天然氣工業.油、氣生產中含硫化氫(H2S)環境下使用的材料.第3部分:耐裂化CRAs(耐腐蝕合金)和其他合金 |
|
| ISO 1516-2002 |
閃點/無閃點測定.閉杯平衡法 |
Determination of flash/no flash - Closed cup equilibrium method |
| ISO 15161-2001 |
食品與飲料業用ISO 9001:2000應用導則 |
Guidelines on the application of ISO 9001:2000 for the food and drink industry |
| ISO 15165-2001 |
精細陶瓷(高級陶瓷、高級工程陶瓷).分類系統 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Classification system |
| ISO 15166-1-1998 |
膠粘劑.大塊樣品的準備方法.第1部分:由兩部分組成的系統 |
Adhesives - Methods of preparing bulk specimens - Part 1: Two-part systems |
| ISO 15166-2-2000 |
膠粘劑.大塊樣品的準備方法.第2部分:高溫處理一部分系統 |
Adhesives - Methods for preparing bulk specimens - Part 2: Elevated-temperature-curing one-part systems |
| ISO 15167-1999 |
石油產品.中期蒸餾燃料的顆粒含量測定.實驗室過濾法 |
Petroleum products - Determination of particulate content of middle distillate fuels - Laboratory filtration method |
| ISO 15169-2003 |
石油和液體石油產品.用混合油罐測量系統測定立式油罐所含烴類的體積、密度和質量 |
(Petroleum and liquid petroleum products - Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems) |
| ISO 15169-2003 |
石油和液體石油產品.用混合油罐測量系統測定立式油罐所含烴類的體積、密度和質量 |
|
| ISO 1517-1973 |
色漆和清漆.表面干燥試驗.微球體法 |
Paints and varnishes; Surface-drying test; Ballotini method |
| ISO 15170-1-2001 |
道路車輛.帶銷和扭鎖的四孔電連接器.第1部分:尺寸和應用類別 |
Road vehicles - Four-pole electrical connectors with pins and twist lock - Part 1: Dimensions and classes of applications |
| ISO 15170-2-2001 |
道路車輛.帶銷和扭鎖的四極點電連接器.第2部分:試驗和要求 |
Road vehicles - Four-pole electrical connectors with pins and twist lock - Part 2: Tests and requirements |
| ISO 15171-1-1999 |
液壓和一般用途的連接.診斷用途的液壓耦合.壓力下非連接耦合 |
Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1: Coupling not for connection under pressure |
| ISO 15171-2-2000 |
液壓和一般用途的連接.診斷用液壓聯軸器.壓力下連接用帶M16 Pt2端頭的聯軸器 |
Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2: Coupling with M16 ?2 end for connection under pressure |
| ISO 15174-2002 |
奶和奶制品.微生物凝結劑.測定牛奶全凝結塊狀活性 |
Milk and milk products - Microbial coagulants - Determination of total milk-clotting activity |
| ISO 15175-2004 |
土質.與地下水保護相關的土壤特性 |
|
| ISO 15176-2002 |
土壤質量.挖掘土壤和要求再利用的其他土壤物質特征 |
Soil quality - Characterization of excavated soil and other soil materials intended for re-use |
| ISO 15178-2000 |
土壤質量.干燃燒法測定總硫量 |
Soil quality - Determination of total sulfur by dry combustion |
| ISO 1518-1992 |
涂料和清漆.刮痕試驗 |
Paints and varnishes; scratch test |
| ISO 15181-1-2000 |
涂料和清漆.測定防污漆中殺蟲劑釋放率.第1部分:殺蟲劑萃取的一般方法 |
Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 1: General method for extraction of biocides |
| ISO 15181-2-2000 |
涂料和清漆.測定防污漆中殺蟲劑釋放率.第2部分:萃取物中銅離子濃度的測定以及釋放率的計算 |
Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate |
| ISO 15184-1998 |
涂料和清漆.使用鉛筆試驗測定薄膜硬度 |
Paints and varnishes - Determination of film hardness by pencil test |
| ISO 15186-1-2000 |
聲學.用聲強進行建筑物和建筑構件的隔聲測量.第1部分:實驗室測量 |
Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 1: Laboratory measurements |
| ISO 15186-2-2003 |
聲學.用聲強測定建筑物和建筑構件的隔聲性能.第2部分:現場測量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 2: Field measurements) |
| ISO 15186-2-2003 |
聲學.用聲強測定建筑物和建筑構件的隔聲性能.第2部分:現場測量 |
|
| ISO 15186-3-2002 |
聲學.用聲強進行建筑物和建筑構件的隔聲測量.第3部分:低頻率實驗室測量 |
Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 3: Laboratory measurements at low frequencies |
| ISO 15187-2000 |
操縱工業機器人.機器人程序設計和操縱的圖形使用者接口 |
Manipulating industrial robots - Graphical user interfaces for programming and operation of robots (GUI-R) |
| ISO 15188-2001 |
術語標準化項目管理指南 |
Project management guidelines for terminology standardization |
| ISO 15189-2003 |
醫學實驗室.質量和資格的特殊要求 |
Medical laboratories - Particular requirements for quality and competence |
| ISO 15189-2003 |
醫學實驗室.質量和資格的特殊要求 |
|
| ISO 15189-2003 |
醫學實驗室.質量和資格的特殊要求 |
|
| ISO 1519-2002 |
涂料和清漆.彎曲試驗(圓心軸) |
Paints and varnishes - Bend test (cylindrical mandrel) |
| ISO 15190-2003 |
醫學實驗室.安全要求 |
(Medical laboratories - Requirements for safety) |
| ISO 15190-2003 |
醫學實驗室.安全要求 |
|
| ISO 15193-2002 |
實驗室條件下醫用診斷裝置.生物原始試樣中數量值的測量.參考測量法的說明 |
In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Presentation of reference measurement procedures |
| ISO 15194-2002 |
實驗室條件下醫用診斷裝置.生物原始試樣中數量值的測量.標準物質的描述 |
In vitro diagnostic systems - Measurement of quantities in samples of biological origin - Description of reference materials |
| ISO 15195-2003 |
實驗室醫學.標準測量實驗室的要求 |
(Laboratory medicine - Requirements for reference measurement laboratories) |
| ISO 15195-2003 |
實驗室醫學.標準測量實驗室的要求 |
|
| ISO 15197-2003 |
體外診斷試驗系統.糖尿病癥管理中自測用血糖監測系統的要求 |
(In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus) |
| ISO 15197-2003 |
體外診斷試驗系統.糖尿病癥管理中自測用血糖監測系統的要求 |
|
| ISO 15198-2004 |
臨床實驗室藥物.體外診斷醫療設備.由制造商證實的用戶質量控制程序 |
|
| ISO 1520-1999 |
涂料和清漆.杯突試驗 |
Paints and varnishes - Cupping test |
| ISO 15202-1-2000 |
工作場所空氣. 用等離子體原子發射光譜法對氣載顆粒物質中金屬和非金屬的測定.第1部分:取樣 |
Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling |
| ISO 15202-2-2001 |
工作場所空氣. 用等離子體原子發射光譜法對氣載顆粒物質中金屬和非金屬的測定.第2部分:樣品制備 |
Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 2: Sample preparation |
| ISO 15202-3-2004 |
車間空氣.感應耦合等離子體原子發射光譜法對氣載顆粒物中金屬及類金屬的測定.第3部分:分析 |
|
| ISO 15212-1-1998 |
擺動式密度計.第1部分:實驗室儀器 |
Oscillation-type density meters - Part 1: Laboratory instruments |
| ISO 15212-2-2002 |
振蕩式密度計.第2部分:均質液體用過程測量儀器 |
Oscillation-type density meters - Part 2: Process instruments for homogeneous liquids |
| ISO 15213-2003 |
食品和動物飼料的微生物學.在厭氧條件下亞硫酸還原菌生長計數的水平法 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of sulfite-reducing bacteria growing under anaerobic conditions) |
| ISO 15213-2003 |
食品和動物飼料的微生物學.在厭氧條件下亞硫酸還原菌生長計數的水平法 |
|
| ISO 15214-1998 |
食品和動物飼料的微生物學.適溫性乳酸菌的水平計數法.30℃菌落計數技術 |
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of mesophilic lactic acid bacteria - Colony-count technique at 30 鳦 |
| ISO 15217-2000 |
液壓傳動系統和件.帶接地端的16mm電氣連接器.特性和要求 |
Fluid power systems and components - 16 mm square electrical connector with earth contact - Characteristics and requirements |
| ISO 15218-2003 |
氣壓傳動.3/2電磁閥.安裝接口表面 |
(Pneumatic fluid power - 3/2 solenoid valves - Mounting interface surfaces) |
| ISO 15218-2003 |
氣壓傳動.3/2電磁閥.安裝接口表面 |
|
| ISO 15219-2004 |
土方機械.塔式纜索挖掘機.術語和商用規范 |
|
| ISO 1522 Technical Corrigendum 1-1998 |
涂料和清漆.擺桿阻尼試驗.技術勘誤1 |
Paints and varnishes - Pendulum damping test; Technical Corrigendum 1 |
| ISO 1522-1998 |
涂料和清漆.擺桿阻尼試驗 |
Paints and varnishes - Pendulum damping test |
| ISO 15223 AMD 1-2002 |
醫療裝置.與醫療裝置標簽、加標簽和提供的信息一起使用的符號.修改件1 |
Medical devices - Symbols to be used with medical device labels, labelling and information to be supplied; Amendment 1 |
| ISO 15223 AMD 2-2004 |
醫療器械.用于醫療器械標簽、作標記和提供信息的符號.修改件2 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com