標準號 |
中文名稱 |
英文名稱 |
| BS ISO 6549-2000 |
道路車輛.H和R點測定的程序 |
Road vehicles - Procedure for H- and R-point determination |
| BS ISO 6550-3-2002 |
道路車輛.帶錐座的封閉型電熱塞及其氣缸安裝孔尺寸.第3部分:M10DRKONG |
Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - M10 glow-plugs |
| BS ISO 6550-4-2005 |
道路車輛.帶錐座封閉型電熱塞及其汽缸蓋安裝孔尺寸.M8 x 1電熱塞 |
|
| BS ISO 6561-1-2005 |
水果、蔬菜及其制品.鎘含量測定.石墨爐原子吸收光譜測定法 |
|
| BS ISO 6561-2-2005 |
水果、蔬菜及其制品.鎘含量測定.火焰原子吸收光譜測定法 |
|
| BS ISO 6570-2002 |
天然氣.潛在烴液含量的測定.測重法 |
Natural gas - Determination of potential hydrocarbon liquid content - Gravimetric methods |
| BS ISO 6576-2004 |
月桂(Laurus nobilis Linnaeus)整葉和碎葉 |
|
| BS ISO 6576-2004 |
月桂.(Laurus nobilis Linnaeus)整葉和碎葉 |
|
| BS ISO 6588-1-2005 |
紙、紙板和紙漿.水提取物pH值的測定.冷萃取 |
|
| BS ISO 6605-2003 |
液壓傳動.軟管及軟管組件.試驗方法 |
(Hydraulic fluid power - Hoses and hose assemblies - Test methods) |
| BS ISO 6611-2004 |
乳和乳制品.酵母和(或)霉菌菌落形成單位的計數.25℃時的菌落計數技術 |
|
| BS ISO 6621-2-2004 |
內燃機.活塞環.檢驗測量規則 |
|
| BS ISO 6621-4-2003 |
內燃機.活塞環.一般規范 |
(Internal combustion engines - Piston rings - General specifications) |
| BS ISO 6623-2004 |
內燃機.活塞環.鑄鐵制刮環 |
|
| BS ISO 6644-2002 |
流動谷物和精加工谷物產品.機械方法自動取樣 |
Flowing cereals and milled cereal products - Automatic sampling by mechanical means |
| BS ISO 6646-2000 |
稻米.稻谷和有殼稻谷潛在碾磨產量的測定 |
Rice - Determination of the potential milling yield from paddy and husked rice |
| BS ISO 666-1997 |
機床.輪轂式法蘭平面磨輪的安裝 |
Machine tools - Mounting of plain grinding wheels by means of hub flanges |
| BS ISO 6670-2002 |
速溶咖啡.帶內襯的大容量箱的取樣方法 |
Instant coffee - Sampling method for bulk units with liners |
| BS ISO 6673-2003 |
生咖啡豆.在105℃時質量損失的測定 |
(Green coffee - Determination of loss in mass at 105 鳦) |
| BS ISO 668-1996 |
貨運集裝箱系列1.分類、外形尺寸和額定容量 |
Series 1 freight containers - Classification, dimensions and ratings |
| BS ISO 6686-1995 |
作物保護設備.防滴裝置.減小噴嘴液流量的測定 |
Equipment for crop protection - Anti-drip devices - Determination of performance |
| BS ISO 6690-1997 |
擠奶裝置的機械試驗 |
Milking machine installations - Mechanical tests |
| BS ISO 6710-1996 |
靜脈取血樣用一次性容器 |
Single-use containers for venous blood specimen collection |
| BS ISO 6721-10-2001 |
塑料.動力機械性能的測定.使用平行板式振蕩流變儀測定復合剪切粘度 |
(Plastics - Determination of dynamic mechanical properties - Complex shear viscosity using a parallel-plate oscillatory rheometer) |
| BS ISO 6741-1-2002 |
紡織品.纖維和紗.寄銷品商業質量的測定.質量的測定和計算 |
Textiles - Fibres and yarns - Determination of commercial mass of consignments - Mass determination and calculations |
| BS ISO 6741-2-2002 |
紡織品.纖維和紗.寄銷品商業質量的測定.獲取實驗室樣品的方法 |
Textiles - Fibres and yarns - Determination of commercial mass of consignments - Methods for obtaining laboratory samples |
| BS ISO 6741-3-2002 |
紡織品.纖維和紗.寄銷品商業質量的測定.樣品凈化規程 |
Textiles - Fibres and yarns - Determination of commercial mass of consignments - Specimen cleaning procedures |
| BS ISO 6743-1-2002 |
潤滑劑、工業用潤滑油和有關產品(L類).分類.A 族(總損耗系統) |
Lubricants, industrial oils and related products (class L) - Classification - Family A (Total loss systems) |
| BS ISO 6743-3-2004 |
潤滑劑、工業潤滑油和有關產品(L類).分類.D組(壓縮機) |
|
| BS ISO 6743-4-1999 |
潤滑劑、工業用潤滑油和有關產品(L類).分類.第4部分:H族(液壓系統) |
Lubricants, industrial oils and related products (class L) - Classification - Family H (hydraulic systems) |
| BS ISO 6743-9-2004 |
潤滑劑、工業潤滑油和有關產品(L類).分類.X族(潤滑脂) |
|
| BS ISO 6743-99-2002 |
潤滑劑、工業用潤滑油和有關產品(L類).分類.總則 |
Lubricants, industrial oils and related products (class L) - Classification - General |
| BS ISO 6746-1-2003 |
土方機械.尺寸和代碼的定義.主機 |
(Earth-moving machinery - Definitions of dimensions and codes - Base machine) |
| BS ISO 6746-2-2003 |
土方機械.尺寸和代碼的定義.設備和附件 |
(Earth-moving machinery - Definitions of dimensions and codes - Equipment and attachments) |
| BS ISO 6751-1998 |
制模工具.圓柱頭推桿 |
Tools for moulding - Ejector pins with cylindrical head |
| BS ISO 6753-2-1998 |
模壓工具.機加工金屬板.第2部分:模具的機加工金屬板 |
Tools for pressing and moulding - Machined plates - Machined plates for moulds |
| BS ISO 6768-1998 |
環境空氣.二氧化氮含量濃度的測定.改進的格里斯-薩爾茨曼(Griess-Saltzman) 法 |
Ambient air - Determination of mass concentration of nitrogen dioxide - Modified Griess-Saltzman method |
| BS ISO 6780-1995 |
貨物聯運用普通平托盤.一般用途的貨物聯運托盤主要尺寸及公差 |
(General-purpose flat pallets for through transit of goods - Principal dimensions and tolerances) |
| BS ISO 6787-2001 |
螺釘和螺母用裝配工具.可調扳手 |
(Assembly tools for screws and nuts - Adjustable wrenches) |
| BS ISO 6798-1996 |
往復式內燃機.空氣噪聲的測量.工程法和測量法 |
Reciprocating internal combustion engines - Measurement of emitted airborne noise - Engineering method and survey method |
| BS ISO 68-1-1999 |
ISO普通螺紋.基本外形.第1部分:米制螺紋 |
ISO general purpose screw threads - Basic profile - Metric screw threads |
| BS ISO 68-2-1999 |
ISO普通螺紋.基本外形.第1部分:英制螺紋 |
ISO general purpose screw threads - Basic profile - Inch screw threads |
| BS ISO 6805-1995 |
井下采礦用橡膠軟管和軟管組件.采煤用的鋼絲加筋液壓型.規范 |
Rubber hoses and hose assemblies for underground mining - Wire-reinforced hydraulic types for coal mining - Specification |
| BS ISO 6811-1998 |
球面滑動軸承.詞匯 |
Spherical plain bearings - Vocabulary |
| BS ISO 6813-1998 |
道路車輛.碰撞分類.術語 |
Road vehicles - Collision classification - Terminology |
| BS ISO 6846-1995 |
攝影技術.黑白連續色調相紙.印相用ISO感光度和寬容度的測定 |
Photography - Black and white continuous tone papers - Determination of ISO speed and ISO range for printing |
| BS ISO 6849-1997 |
攝影術.加工照片廢棄物.硼的測定 |
Photography - Processing wastes - Determination of boron |
| BS ISO 6851-2002 |
攝影.沖洗廢液.氨態氮總含量的測定(微擴散基氏定氮法) |
Photography - Processing waste - Determination of total amino nitrogen (microdiffusion Kjeldahl method) |
| BS ISO 6853-2002 |
攝影.沖洗廢液.氨態氮含量的測定(微擴散法) |
Photography - Processing waste - Determination of ammoniacal nitrogen (microdiffusion method) |
| BS ISO 6861-1997 |
信息和文獻工作.目錄信息交換用Glagolitic字母代碼字符集 |
Information and documentation - Glagolitic alphabet coded character set for bibliographic information interchange |
| BS ISO 6870-2003 |
動物飼料.玉米赤霉烯酮含量的定性測定 |
(Animal feeding stuffs - Qualitative determination of zearalenone) |
| BS ISO 6879-1996 |
空氣質量.空氣質量測量方法的性能特征和有關概念 |
Air quality - Performance characteristics and related concepts for air quality measuring methods |
| BS ISO 69-1998 |
電影攝影.16mm電影磁片.剪切和穿孔尺寸 |
Cinematography - 16 mm motion-picture magnetic film - Cutting and perforating dimensions |
| BS ISO 690-2-1998 |
信息和文獻.參考文獻.第2部分:電子文獻或其分冊 |
Information and documentation - Bibliographic references - Electronic documents or parts thereof |
| BS ISO 6916-1-1996 |
柔性多孔聚合材料.泡沫和海綿多孔橡膠制品.第1部分:薄板 |
Flexible cellular polymeric materials - Sponge and expanded cellular rubber products - Specification - Sheeting |
| BS ISO 6926-2000 |
聲學.聲功率級測定用基準聲源的性能和校正要求 |
Acoustics - Requirements for the performance and calibration of reference sound sources for the determination of sound power levels |
| BS ISO 6939-2002 |
紡織品.筒子紗.紗線抗斷裂強度試驗法.絞紗法 |
Textiles - Yarns from packages - Method of test for breaking strength of yarn by the skein method |
| BS ISO 694-2000 |
船舶技術.船上磁羅盤的定位 |
Ships and marine technology. Positioning of magnetic compasses in ships |
| BS ISO 6953-1-2001 |
氣壓傳動.壓縮氣體壓力調節器和過濾器調節器.供應商說明書中包括的主要特性和產品標記要求 |
Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Main characteristics to be included in literature from suppliers and product-marking requirements |
| BS ISO 6953-2-2001 |
氣壓傳動.壓縮氣體壓力調節器和過濾器調節器.測定供應商說明書中包括的主要特性的試驗方法 |
Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Test methods to determine the main characteristics to be included in literature from suppliers |
| BS ISO 6954-2001 |
機械振動.客輪和商船可允許振動的測量、報告和評價導則 |
Mechanical vibration - Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships |
| BS ISO 6969-2004 |
道路車輛.聲音信號設備.車輛安裝后的試驗 |
|
| BS ISO 6971-2002 |
焊接結構拉曳用彎板鏈、附件和鏈輪 |
Cranked-link drag chains of welded construction, attachments and sprockets |
| BS ISO 6972-2002 |
焊接結構工程用彎板鏈、附件和鏈輪 |
Cranked-link mill chains of welded construction, attachments and sprockets |
| BS ISO 6974-1-2000 |
天然氣.用氣相色譜法測定具有規定不定度的成分.第1部分:簡明分析導則 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Guidelines for tailored analysis |
| BS ISO 6974-2-2001 |
天然氣.用氣相色譜法測定規定的不確定性.數據處理用定性和統計巡飭肯低廠 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Measuring-system characteristics and statistics for processing of data |
| BS ISO 6974-3-2000 |
天然氣.用氣相色譜法測定具有規定不定度的成分.用兩個填充柱對氫,氦,氧,氮,二氧化碳和達到C8的碳?xì)浠衔餃y(cè)定 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns |
| BS ISO 6974-4-2000 |
天然氣.用氣相色譜法測定具有規定不定度的成分.第4部分:用兩柱測定實驗室和聯機測量系統用氮、二氧化碳和C到C和C的烴類 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns |
| BS ISO 6974-5-2000 |
天然氣.用氣相色譜法測定具有規定不定度的成分.用三柱測定實驗室和聯機測量系統用氮、二氧化碳和C到C和C的烴類 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns |
| BS ISO 6974-6-2002 |
天然氣.用氣相色譜法測定具有規定不定度的成分.用三柱測定氫、氦、氧、氮、二氧化碳和CDOWN1 至 CDOWN8的碳?xì)浠衔?/td>
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and CDOWN1 to CDOWN8 hydrocarbons using three capillary columns |
| BS ISO 6980-1997 |
校準劑量計和劑量強度計及測定充作為β輻射能量函數的靈敏度用的β標準放射源 |
Specification for reference beta radiations for calibrating dosimeters and dose-rate meters and for determining their response as a function of beta-radiation energy |
| BS ISO 6981-1996 |
液壓傳動.液壓缸.活塞桿端孔.裝配尺寸 |
Hydraulic fluid power - Cylinders - Rod end plain eyes - Mounting dimensions |
| BS ISO 6982-1996 |
液壓傳動.液壓缸.活塞桿端球面環孔.裝配尺寸 |
Hydraulic fluid power - Cylinders - Rod end spherical eyes - Mounting dimensions |
| BS ISO 6989-2002 |
紡織纖維.短纖維長度和長度分布的測定(用單纖維的測定) |
Textiles fibres - Determination of length and length distribution of staple fibres (by measurement of single fibres) |
| BS ISO 70-1995 |
電影技術.在35mm電影膠片上的35mm負片光學聲帶.位置和最大寬度尺寸 |
Cinematography - Monophonic 35 mm negative photographic sound record on 35 mm motion-picture film - Position and maximum width dimensions |
| BS ISO 7000-2004 |
設備用圖形符號.索引和一覽表 |
|
| BS ISO 7004-2002 |
攝影.工業用射線照相膠片.置于X-射線和γ-射線下的膠片ISO感光 速度和ISO平均速度梯度G2和G4的測定 |
Photography - Industrial radiographic films - Determination of ISO speed, ISO average gradient and ISO gradients G2 and G4 when exposed to X- and gamma-radiation |
| BS ISO 701-1999 |
國際齒輪符號.幾何數據的符號 |
International gear notation - Symbols for geometrical data |
| BS ISO 7026-1998 |
柴油發動機.S規格B類針式噴嘴的20、21、21.1和27型螺旋擰入式噴嘴架 |
Diesel engines - Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size `S1` type `B` |
| BS ISO 704-2001 |
術語工作.原則和方法 |
Terminology work - Principles and methods |
| BS ISO 7041-2002 |
2型長效扭矩式六角螺母(使用非金屬墊圈).性能類別9和12 |
Prevailing torque type hexagon nuts (with non-metallic insert), style 2. Property classes 9 and 12 |
| BS ISO 706-2004 |
橡膠膠乳.凝固物(篩余物)含量的測定 |
|
| BS ISO 7063-2004 |
滾動軸承.滾針軸承滾道滾針.邊界尺寸和公差 |
|
| BS ISO 709-2001 |
香精油.酯化值的測定 |
Essential oils - Determination of ester value |
| BS ISO 7112-1999 |
林業機械.便攜式手持灌木鏟除機和雜草修剪機.詞匯 |
Machinery for forestry - Portable hand-held brush-cutters and grass-trimmers - Vocabulary |
| BS ISO 7113-1999 |
便攜式手持林業機械.灌木鏟除機用割鋸附件.單片金屬刃 |
Portable hand-held forestry machines - Cutting attachments for brush cutters - Single piece metal blades |
| BS ISO 7148-1-2000 |
滑動軸承.軸承材料摩擦特性試驗.軸承金屬試驗 |
Plain bearings - Testing of tribological behaviour of bearing materials - Testing of bearing metals |
| BS ISO 7148-2-2000 |
滑動軸承.軸承材料摩擦特性試驗.多聚物軸承材料試驗 |
Plain bearings - Testing of tribological behaviour of bearing materials - Testing of polymer-based bearing materials |
| BS ISO 7176-1-1999 |
輪椅.靜態穩定性的測定 |
Wheelchairs - Determination of static stability |
| BS ISO 7176-14-1997 |
輪椅.電動輪椅的動力和控制系統.要求和試驗方法 |
Wheelchairs - Power and control systems for electric wheelchairs - Requirements and test methods |
| BS ISO 7176-15-1997 |
輪椅.第15部分:信息說明、文獻工作和作標記 |
Wheelchairs - Requirements for information disclosure, documentation and labelling |
| BS ISO 7176-16-1997 |
輪椅.椅裝套布的耐燃性.要求和試驗方法 |
Wheelchairs - Resistance to ignition of upholstered parts - Requirements and test methods |
| BS ISO 7176-2-2001 |
輪椅.電動輪椅動態穩定性的測定 |
Wheelchairs - Determination of dynamic stability of electric wheelchairs |
| BS ISO 7176-21-2003 |
輪椅.電動輪椅和小型摩托車電磁兼容性的要求和試驗方法 |
(Wheelchairs - Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motorized scooters) |
| BS ISO 7176-22-2000 |
輪椅.安裝方法 |
Wheelchairs - Set-up procedures |
| BS ISO 7176-24-2004 |
輪椅.使用者操作的爬梯設備的要求和試驗方法 |
|
| BS ISO 7176-3-2003 |
輪椅.制動器效能的測定 |
(Wheelchairs - Determination of effectiveness of brakes) |
| BS ISO 7176-4-1998 |
輪椅.電動輪椅能耗和理論距離范圍測定用小型摩托車 |
Wheelchairs - Energy consumption of electric wheelchairs and scooters for determination of theoretical distance range |
| BS ISO 7176-6-2002 |
輪椅.電動輪椅最大速度、加速度及減速度的測定 |
Wheelchairs - Determination of maximum speed, acceleration and deceleration of electric wheelchairs |
| BS ISO 7176-8-1998 |
輪椅.靜態強度、沖擊強度和疲勞強度的要求和試驗方法 |
Wheelchairs - Requirements and test methods for static, impact and fatigue strengths |
| BS ISO 7176-9-2002 |
輪椅.電動輪椅氣候試驗 |
Wheelchairs - Climatic tests for electric wheelchairs |
| BS ISO 7180-1997 |
氣動流體動力.氣缸.缸筒和氣口螺紋規格 |
Pneumatic fluid power - Cylinders - Bore and port thread sizes |
| BS ISO 7181-1997 |
液壓傳動.液壓缸.缸筒和活塞桿截面比 |
Hydraulic fluid power - Cylinders - Bore and rod area ratios |
| BS ISO 7187-1996 |
攝影技術.直接彩色照片材料.ISO感光度的測定 |
Photography - Materials for direct-positive colour-print cameras - Determination of ISO speed |
| BS ISO 7197-1998 |
神經外科植入物.無菌的,一次性使用的腦積水分流管和組件 |
Neurosurgical implants - Sterile, single-use hydrocephalus shunts and components |
| BS ISO 7198-1998 |
心血管植入物.血管修復術 |
Cardiovascular implants - Tubular vascular prostheses |
| BS ISO 7200-2001 |
技術制圖.標題欄 |
Technical drawing - Title blocks |
| BS ISO 7206-4-2002 |
外科植入物.部分和全部假體關節.第4部分:干股骨神經組件和扭轉敷物耐久性能的測定 |
Implants for surgery - Partial and total hip joint prostheses - Determination of endurance properties of stemmed femoral components |
| BS ISO 7211-3-2002 |
紡織品.機織物.結構.分析方法.織物紗線卷曲性的測定 |
Textiles - Woven fabrics - Construction - Methods of analysis - Determination of crimp of yarn in fabric |
| BS ISO 7211-4-2002 |
紡織品.機織物.結構.分析方法.從織物中取出的紗的捻度測定 |
Textiles - Woven fabrics - Construction - Methods of analysis - Determination of twist in yarn removed from fabric |
| BS ISO 7211-5-2002 |
紡織品.機織物.結構.分析方法.從織物中取出的紗的線密度測定 |
Textiles - Woven fabrics - Construction - Methods of analysis - Determination of linear density of yarn removed from fabric |
| BS ISO 7214-1998 |
泡沫塑料.聚乙烯.試驗方法 |
Cellular plastics. Polyethylene. Methods of test |
| BS ISO 7215-1996 |
鐵礦石.相對還原性的測定 |
Iron ores - Determination of relative reducibility |
| BS ISO 7229-1997 |
橡膠或塑料涂覆織物.透氣性測量 |
Rubber- or plastics-coated fabrics - Measurements of gas permeability |
| BS ISO 7238-2004 |
奶油.乳清pH值的測定.電位滴定法 |
|
| BS ISO 7240-15-2004 |
火災探測和警報系統.多感火災探測器 |
|
| BS ISO 7241-2-2000 |
液壓傳動.速動連接件.試驗方法 |
Hydraulic fluid power - Quick-action couplings - Test methods |
| BS ISO 727-1-2002 |
壓力管件用由未增塑的聚氯乙烯,氯化聚氯乙烯或丙烯腈/丁二烯/苯乙烯制的帶普通管套的管配件.米制系列 |
Fittings made from unplasticized poly (vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Metric series |
| BS ISO 727-2-2002 |
壓力管件用由未增塑的聚氯乙烯,氯化聚氯乙烯或丙烯腈/丁二烯/苯乙烯制的帶普通管套的管配件.英制系列 |
Fittings made from unplasticized poly (vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Inch-based series |
| BS ISO 727-2-2005 |
壓力管件用由未增塑聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)或丙烯腈/丁二烯/苯乙烯(ABS)制的帶普通管套的管配件.英制系列 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com