標準號 |
中文名稱 |
英文名稱 |
| BS ISO 1122-1-1998 |
齒輪術語詞匯.幾何學上的定義 |
Vocabulary of gear terms - Definitions related to geometry |
| BS ISO 11224-1994 |
紡織材料.非紡織品.織品的形成和捆包.詞匯 |
Textiles - Nonwovens - Web formation and bonding - Vocabulary |
| BS ISO 11224-2003 |
紡織品.無紡織物的成網及粘合.詞匯 |
(Textiles - Web formation and bonding in nonwovens - Vocabulary) |
| BS ISO 11235-1999 |
橡膠化合物配料.亞磺酰胺催速劑.試驗方法 |
Rubber compounding ingredients - Sulfenamide accelerators - Test methods |
| BS ISO 11243-1995 |
自行車.自行車用行李箱.規劃,分類和試驗 |
Cycles - Luggage carriers for bicycles - Concepts, classification and testing |
| BS ISO 11262-2003 |
土壤質量.氰化物的測定 |
(Soil quality - Determination of cyanide) |
| BS ISO 11271-2002 |
土質.氧化還原反應潛在力的測定.現場法 |
Soil quality - Determination of redox potential - Field method |
| BS ISO 11275-2004 |
土質.非飽和水滲導性和水保持特性的測定.風的蒸發法 |
|
| BS ISO 11285-2004 |
牛乳.乳果糖含量的測定.酶催化法 |
|
| BS ISO 11286-2004 |
茶.用粒度分析法進行等級分類 |
|
| BS ISO 113-1999 |
滾動軸承.止推軸承箱.尺寸范圍 |
Rolling bearings - Plummer block housings - Boundary dimensions |
| BS ISO 11303-2002 |
金屬和合金的腐蝕.防大氣腐蝕方法的選擇指南 |
Corrosion of metals and alloys - Guidelines for selection of protection methods against atmospheric corrosion |
| BS ISO 11312-2001 |
攝影技術.預壓工業用敏感材料薄板材.尺寸和相關要求 |
Photography - Sheets of sensitized material for the pre-press industry - Dimensions and related requirements |
| BS ISO 11314-1996 |
攝影.電影放映機.成象尺度/放映距離的計算 |
Photography - Projectors - Image size/projection distance calculations |
| BS ISO 11315-3-1999 |
攝影.室內投影機.透射投影屏的分類和其透射光亮度水平的測量 |
Photography - Projection in indoor rooms - Classification of transmitting projection screens and measurement of their transmitted luminance levels |
| BS ISO 11316-1999 |
攝影術.靜態圖片的投影.圖像特性評價的測量方法 |
Photography - Projection of still pictures - Measuring methods for the evaluation of imaging properties |
| BS ISO 11318-2002 |
心臟去纖顫器.可植入體內的心臟去纖顫器聯結器組件DF-1.尺寸和試驗要求 |
Cardiac defibrillators - Connector assembly DF-1 for implantable defibrillators - Dimensions and test requirements |
| BS ISO 1132-1-2000 |
滾動軸承.公差.術語和定義 |
Rolling bearings - Tolerances - Terms and definitions |
| BS ISO 1132-2-2002 |
滾動軸承.公差.測量和校驗原理和方法 |
Rolling bearings - Tolerances - Measuring and gauging principles and methods |
| BS ISO 11323-2002 |
鐵礦石和直接還原鐵.詞匯 |
Iron ore and direct reduced iron - Vocabulary |
| BS ISO 11338-1-2003 |
固定源輻射.氣體和粒子相多環芳香烴的測定.取樣 |
(Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Sampling) |
| BS ISO 11338-2-2003 |
固定源輻射.氣相和粒子相多環芳香烴的測定.樣品準備、凈化和測定 |
(Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Sample preparation, clean-up and determination) |
| BS ISO 11342-1998 |
機械振動.撓性轉子機械平衡的方法和標準 |
Mechanical vibration - Methods and criteria for the mechanical balancing of flexible rotors |
| BS ISO 11344-2004 |
合成生橡膠.用凝膠滲膠透色譜法測定溶液聚合物的分子質量分布 |
|
| BS ISO 11345-1998 |
橡膠.碳黑分散的評估.快速比較法 |
Rubber - Assessment of carbon black dispersion - Rapid comparative methods |
| BS ISO 11357-2-1999 |
塑料.差示掃描量熱法(DSC).玻璃傳導溫度的測定 |
Plastics - Differential scanning calorimetry (DSC) - Determination of glass transition temperature |
| BS ISO 11357-3-1999 |
塑料.級差掃描量熱術(DSC).熔化和結晶焓和溫度的測定 |
Plastics - Differential scanning calorimetry (DSC) - Determination of temperature and enthalpy of melting and crystallization |
| BS ISO 11357-5-2001 |
塑料.差示掃描量熱法(DSC).反應曲線溫度時間特性測定.變換程度和反應焓 |
Plastics - Differential scanning calorimetry (DSC) - Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion |
| BS ISO 11357-6-2002 |
塑料.差示掃描量熱法(DSC).氧化傳導時間的測定 |
Plastics - Differential scanning calorimetry (DSC) - Determination of oxidation induction time |
| BS ISO 11357-7-2002 |
塑料.差示掃描量熱法(DSC).結晶動力的測定 |
Plastics - Differential scanning calorimetry (DSC) - Determination of crystallization kinetics |
| BS ISO 11359-1-1999 |
塑料.熱力學分析(TMA).一般原理 |
Plastics - Thermomechanical analysis (TMA) - General principles |
| BS ISO 11359-2-1999 |
塑料.熱力學分析(TMA).線性熱膨脹系數和玻璃化轉變溫度的測定 |
Plastics - Thermomechanical analysis (TMA) - Determination of coefficient of linear thermal expansion and glass transition temperature |
| BS ISO 11359-3-2002 |
塑料.熱力學分析(TMA).溫度滲透力的測定 |
Plastics - Thermomechanical analysis (TMA) - Determination of penetration temperature |
| BS ISO 11376-1997 |
塑料.環氧樹脂和環氧丙基酯.無機氯的測定 |
Plastics. Epoxy resins and glycidyl esters. Determination of inorganic chlorine |
| BS ISO 11377-1998 |
鋪地織物.地板土.試驗位點的確立和對土的評估 |
Textile floor coverings - Floor soiling - Test site set-up and soiling evaluation |
| BS ISO 11378-1-2000 |
紡織品地板覆蓋物.實驗室土壤試驗.卡帕土壤試驗 |
Textile floor coverings - Laboratory soiling tests - Kappasoil test |
| BS ISO 11379-1998 |
鋪地織物.用霧化抽吸器對實驗室清潔的過程 |
Textile floor coverings - Laboratory cleaning procedure using spray extraction |
| BS ISO 11393-5-2002 |
手持式鏈鋸使用者的防護服裝.防護綁腿的試驗方法和性能要求 |
Protective clothing for users of hand-held chain-saws - Test methods and performance requirements for protective gaiters |
| BS ISO 11399-1996 |
熱環境中的人類功效學.相關國際標準的原理和使用 |
(Ergonomics of the thermal environment. Principles and application of relevant International standards) |
| BS ISO 11403-1-1996 |
塑料.可比較多點數據的采集和表示.第1部分:機械性能 |
(Plastics. Acquisition and presentation of comparable multipoint data. Mechanical) |
| BS ISO 11408-1999 |
化學轉化膜覆層.鐵和鋼上的黑色氧化覆層.規范和試驗方法 |
(Chemical conversion coatings - Black oxide coating on iron and steel - Specification and test methods) |
| BS ISO 11415-1998 |
壓力設備.模具 |
(Tools for pressing - Die sets) |
| BS ISO 11416-1995 |
網球拍.網球拍的部件和物理參數 |
(Tennis rackets - Racket components and physical parameters) |
| BS ISO 11421-1997 |
光學和光學儀器.光學傳輸功能(OTF)測量的準確性 |
Optics and optical instruments - Accuracy of optical transfer function (OTF) measurement |
| BS ISO 11424-1997 |
內燃機氣動系統和真空系統用橡膠軟管和導管.規范 |
Rubber hoses and tubing for air and vacuum systems for internal-combustion engines - Specification |
| BS ISO 11425-1997 |
機動車液壓轉向裝置用橡膠軟管和軟管組件.規范 |
Rubber hoses and hose assemblies for automobile power-steering systems - Specification |
| BS ISO 11438-1-1994 |
鎳鐵合金.用電熱原子吸收分光光度測定法測定痕量素含量.第1部分: 基本要求和試樣溶解 |
Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - General requirements and sample dissolution |
| BS ISO 11438-2-1994 |
鎳鐵合金.用電熱原子吸收分光光度測定法測定痕量素含量.第2部分: 鉛含量測定 |
Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of lead content |
| BS ISO 11438-3-1994 |
鎳鐵合金.用電熱原子吸收分光光度測定法測定痕量素含量.第3部分: 銻含量測定 |
Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of antimony content |
| BS ISO 11438-4-1994 |
鎳鐵合金.用電熱原子吸收分光光度測定法測定痕量素含量.第4部分: 錫含量測定 |
Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of tin content |
| BS ISO 11438-5-1994 |
鎳鐵合金.用電熱原子吸收分光光度測定法測定痕量素含量.第5部分:碲含量測定 |
Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of tellurium content |
| BS ISO 11438-6-1994 |
鎳鐵合金.用電熱原子吸收分光光度測定法測定痕量素含量.第6部分:鉈含量測定 |
Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of thallium content |
| BS ISO 11438-7-1994 |
鎳鐵合金.用電熱原子吸收分光光度測定法測定痕量素含量.第7部分:銀含量測定 |
Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of silver content |
| BS ISO 11438-8-1994 |
鎳鐵合金.用電熱原子吸收分光光度測定法測定痕量素含量.銦含量的測定 |
Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of indium content |
| BS ISO 11442-5-2001 |
技術產品文獻工作.計算機技術信息處理.開發階段的概念設計階段的文獻工作 |
Technical product documentation - Handling of computer-based technical information - Documentation in the conceptual design stage of the development phase |
| BS ISO 11443-2005 |
塑料.用毛細管和狹縫流變儀測定塑料的流動性 |
|
| BS ISO 11450-2000 |
收獲和保護設備.圓壓捆機.術語和商業規范 |
Equipment for harvesting and conservation - Round balers - Terminology and commercial specifications |
| BS ISO 11451-1-2005 |
道路車輛.窄帶輻射的電磁能量產生的電子干擾的車輛試驗方法.一般原則和術語 |
|
| BS ISO 11455-1995 |
原光學玻璃.雙折射的測定 |
Raw optical glass - Determination of birefringence |
| BS ISO 11461-2001 |
土質.使用芯套管作為容積一部分的土壤水含量的測定.重量計方法 |
Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method |
| BS ISO 11462-1-2001 |
靜態過程控制的應用指南.SPC組成因素 |
(Guidelines for implementation of statistical process control (SPC) - Elements of SPC) |
| BS ISO 11463-1996 |
金屬與合金的腐蝕.斑蝕的評定 |
Corrosion of metals and alloys - Evaluation of pitting corrosion |
| BS ISO 11475-1999 |
紙和紙板.D65/10°CIE白度(戶外日光) |
Paper and board - CIE whiteness, D65/10 degrees (outdoor daylight) |
| BS ISO 11476-2001 |
紙和紙板.C/2°CIE白度的測定(室內照明條件) |
Paper and board - Determination of CIE whiteness, C/2 ?(indoor illumination conditions) |
| BS ISO 11480-1998 |
紙漿,紙和紙板.全氯和有機氯的測定 |
Pulp, paper and board - Determination of total chlorine and organically bound chlorine |
| BS ISO 11500-1997 |
液壓傳動.使用光消失原理研制的自動計數器對微粒子不純度的測定 |
Hydraulic fluid power - Determination of particulate contamination by automatic counting using the light extinction principle |
| BS ISO 11512-1996 |
林業機械.覆帶式專用機械.制動系統的性能要求 |
Machinery for forestry - Tracked special machines - Performance criteria for brake systems |
| BS ISO 11520-2-2001 |
農用谷粒干燥機.干燥性能的測定.補充性能和作物特殊要求 |
Agricultural grain driers - Determination of drying performance - Additional procedures and crop-specific requirements |
| BS ISO 11529-1-1999 |
銑刀.名稱.第1部分:實心或鑲尖帶柄端銑刀 |
Milling cutters - Designation - Shank type end mills of solid or tipped design |
| BS ISO 11529-1-2005 |
銑刀.名稱與符號.實心或尖頭形柄式端銑刀 |
|
| BS ISO 11529-2-1999 |
銑刀.名稱.第2部分:帶可分度鑲嵌刀片的柄式銑刀和帶孔銑刀 |
(Milling cutters - Designation - Shank type and bore type milling cutters with indexable inserts) |
| BS ISO 11533-1996 |
鐵礦石.鈷含量的測定.火焰原子吸收光譜測定法 |
Iron ores - Determination of cobalt content - Flame atomic absorption spectrometric method |
| BS ISO 11556-1998 |
紙和紙板.使用單一立式懸吊試樣測定卷曲度 |
Paper and board - Determination of curl using a single vertically suspended test piece |
| BS ISO 11556-2005 |
紙和紙板.利用單個垂直懸吊試驗樣片測定卷曲度 |
|
| BS ISO 11561-1999 |
熱絕緣材料的老化.封閉室中熱塑料的熱抗性的長期變化量的測定(加速試驗室試驗方法) |
Ageing of thermal insulation materials - Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods) |
| BS ISO 11563-2003 |
原油和石油制品.散貨運輸.實現管道滿度的指南 |
(Crude petroleum and petroleum products - Bulk cargo transfer - Guidelines for achieving the fullness of pipelines) |
| BS ISO 11564-1998 |
固定源輻射.氮氧化合物質量濃度的測定.萘二胺光度測定法 |
Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Naphthylethylenediamine photometric method |
| BS ISO 11565-1999 |
道路車輛.火花塞.試驗方法和要求 |
Road vehicles - Spark plugs - Test methods and requirements |
| BS ISO 11566-1996 |
碳纖維.單絲樣品抗拉性能的測定 |
Carbon fibre - Determination of the tensile properties of single-filament specimens |
| BS ISO 11567-1996 |
碳纖維.長絲直經和橫截面積的測定 |
Carbon fibre - Determination of filament diameter and cross-sectional area |
| BS ISO 11568-1-2005 |
銀行業務.密鑰管理(零售).原則 |
|
| BS ISO 11599-1998 |
含有包埋放射廢物的液壓粘合劑的氣體泄漏和氣體滲透性的測定 |
Determination of gas porosity and gas permeability of hydraulic binders containing embedded radioactive waste |
| BS ISO 11600-2002 |
房屋建筑.連接件.密封膠的分類和要求 |
Building construction - Jointing products - Classification and requirements for sealants |
| BS ISO 11605-1995 |
紙和紙板.變積式流量計的校驗 |
Paper and board - Calibration of variable-area flowmeters |
| BS ISO 11614-1999 |
往復式內燃?jí)喝际桨l(fā)動機.不透明度測量?jī)x器和廢氣吸光系數測定儀器 |
Reciprocating internal combustion compression-ignition engines - Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas |
| BS ISO 11620-1998 |
信息和文獻工作.實驗室性能指示器 |
Information and documentation - Library performance indicators |
| BS ISO 11628-1995 |
制圖技術.印刷和印刷油墨.對印刷耐酸性的測定 |
Graphic technology - Prints and printing inks - Determination of resistance of prints to acids |
| BS ISO 1163-1-1996 |
塑料.未增塑聚氯乙烯模制和擠制材料.第1部分:名稱與符號系統及規范 |
Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials. Designation system and basis for specifications |
| BS ISO 11630-1998 |
起重機.輪位對準的測量 |
Cranes - Measurement of wheel alignment |
| BS ISO 11631-1999 |
流體流量測量.流量計性能的表示方法 |
Measurement of fluid flow - Methods of specifying flowmeter performance |
| BS ISO 11632-1998 |
固定源排放物.二氧化硫質量濃厚的測定.離子色譜法 |
Stationary source emissions - Determination of mass concentration of sulfur dioxide - Ion chromatography method |
| BS ISO 11648-1-2003 |
散裝物料取樣的統計方法.一般原則 |
(Statistical aspects of sampling from bulk materials - General principles) |
| BS ISO 11648-2-2001 |
從散裝物料中抽樣的統計方法.顆粒狀物料的抽樣 |
Statistical aspects of sampling from bulk materials - Sampling of particulate materials |
| BS ISO 11667-1998 |
纖維增強塑料.模壓化合物和聚酯膠片.樹脂,纖維增強和礦物填料含量的測定.溶解方法 |
Fibre reinforced plastics. Moulding compounds and prepregs. Determination of resin, reinforcement-fibre and mineral-filler content. Dissolution methods |
| BS ISO 11682-1996 |
灌木鏟除機和草地修整機的技術數據 |
Brush-cutters and grass trimmers - Technical data |
| BS ISO 11698-1-2001 |
縮微照相.用穿孔卡片掃描儀制作的圖像質量的測量方法.試驗圖像的特性 |
Micrographics - Methods of measuring image quality produced by aperture card scanners - Characteristics of the test images |
| BS ISO 11698-2-2001 |
縮微照相.用穿孔卡片掃描儀制作的圖像質量的測量方法.質量標準和控制 |
Micrographics - Methods of measuring image quality produced by aperture card scanners - Quality criteria and control |
| BS ISO 11723-2004 |
固體礦物燃料.砷和硒的測定.艾氏卡混合和氫化法 |
|
| BS ISO 11727-1999 |
氣動流體力學.控制閥和其它件的控制機械裝置和氣門的識別 |
Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components |
| BS ISO 1173-2001 |
螺釘和螺母用裝配工具.機動和手動旋具類的驅動端和連接部件.尺寸和扭矩試驗 |
Assembly tools for screws and nuts - Drive ends for hand and machine-operated screwdriver bits and connecting parts - Dimensions, torque testing |
| BS ISO 11731-2-2004 |
水質.軍團藻屬的檢測和計數.對含低量細菌的水進行直接膜過濾的方法 |
|
| BS ISO 11731-2-2004 |
水質.軍團藻屬的檢測和計數.對含低量細菌的水進行直接膜過濾的方法 |
|
| BS ISO 11752-2001 |
柔性泡沫聚合材料.模塑和擠塑多孔或多孔橡膠制品.已完工部件的壓縮試驗 |
Flexible cellular polymeric materials - Moulded and extruded sponge or expanded cellular rubber products - Compressibility test on finished parts |
| BS ISO 11754-2003 |
空間數據和信息傳輸系統.遙測信道編碼 |
(Space data and information transfer systems - Telemetry channel coding) |
| BS ISO 11760-2005 |
煤的分類 |
|
| BS ISO 11782-1-1998 |
金屬及合金的腐蝕.腐蝕疲勞試驗.失效試驗周期 |
Corrosion of metal and alloys - Corrosion fatigue testing - Cycles to failure testing |
| BS ISO 11782-2-1998 |
金屬及合金的腐蝕.腐蝕疲勞試驗.使用裂縫前的樣品進行裂紋擴展試驗 |
Corrosion of metal and alloys - Corrosion fatigue testing - Crack propagation testing using precracked specimens |
| BS ISO 11783-2-2002 |
農林用拖拉機和機械.系列控制和通信數據網.物理層 |
(Tractors and machinery for agriculture and forestry - Serial control and communications data network - Physical layer) |
| BS ISO 11783-3-1998 |
農業和林業用牽引車和機械裝置.系列控制和通信數據網.數據鏈路層 |
Tractors and machinery for agriculture and forestry - Serial control and communications data network - Data link layer |
| BS ISO 11783-6-2004 |
農林用拖拉機和機械.系列控制和通信數據網.虛擬終端 |
|
| BS ISO 11783-7-2002 |
農業和林業用牽引車和機械裝置.系列控制和通信數據網.實施電文應用層 |
Tractors and machinery for agriculture and forestry - Serial control and communications data network - Implement messages application layer |
| BS ISO 11783-9-2002 |
農業和林業用拖拉機及機械.系列控制和通信數據網.ECU 拖拉機 |
Tractors and machinery for agriculture and forestry - Serial control and communications data network - Tractor ECU |
| BS ISO 11784-1997 |
動物射頻信號識別.代碼結構 |
Radio-frequency identification of animals - Code structure |
| BS ISO 11785-1997 |
動物的無線電頻率識別.技術概念 |
Radio-frequency identification of animals - Technical concept |
| BS ISO 11786-1995 |
農用拖拉機和農業機械.拖拉機上裝的測頭界面規范 |
Agricultural tractors and machinery - Tractor mounted sensor interface - Specification |
| BS ISO 11787-1996 |
農用和林業設備.管理計算機和加工計算機間的數據交換.數據交換體系 |
Machinery for agriculture and forestry - Data interchange between management computer and process computers - Data interchange syntax |
| BS ISO 11788-1-1997 |
農業信息系統間的電子數據交換.農業電子數據要素辭典.常規說明書 |
Electronic data interchange between information systems in agriculture - Agricultural data element dictionary - General description |
| BS ISO 11788-3-2000 |
農業信息系統間的電子數據交換.農業電子數據辭典.豬飼養業 |
Electronic data interchange between information systems in agriculture - Agricultural data element dictionary - Pig farming |
| BS ISO 11798-2000 |
信息和文件.紙上書寫,印刷和復制的永久性和持久性.要求和試驗方法 |
Information and documentation - Permanence and durability of writing, printing and copying on paper - Requirements and test methods |
| BS ISO 11800-1998 |
信息和文獻加工.圖書生產中使用的裝訂方法和裝訂材料的要求 |
Information and documentation - Requirements for binding materials and methods used in the manufacture of books |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com