標準號 |
中文名稱 |
英文名稱 |
| ISO 13555-2-2003 |
柴油發動機.柴油噴注設備動態計時的檢驗規程.第2部分:試驗方法 |
(Diesel engines - Procedure for checking the dynamic timing of diesel fuel injection equipment - Part 2: Test method) |
| ISO 13555-2-2003 |
柴油發動機.柴油噴注設備動態計時的檢驗規程.第2部分:試驗方法 |
|
| ISO 13555-3-2004 |
柴油發動機.柴油噴射裝置動態計時的檢驗規程.第3部分:時間測量設備的檢測 |
|
| ISO 13556-1998 |
道路車輛.排氣系統泄漏試驗和設備規范的局限 |
Road vehicles - Localization of exhaust system leaks and equipment specifications |
| ISO 13559-2002 |
黃油、發酵奶制品和鮮奶酪.污染微生物的計數.在30℃時的菌落計數法 |
Butter, fermented milks and fresh cheese - Enumeration of contaminating microorganisms - Colony-count technique at 30 鳦 |
| ISO 13562-1-2000 |
工業用貨車.第1部分:穩定性試驗 |
Industrial variable-reach trucks - Part 1: Stability tests |
| ISO 13562-2-2001 |
工業用貨車.第2部分:裝卸超過6米長貨運集裝箱的貨車的額外穩定性試驗 |
Industrial variable-reach trucks - Part 2: Additional stability tests for trucks handling freight containers of 6 m length and above |
| ISO 13563-1-2001 |
單側裝載叉車.第1部分:穩定性試驗 |
Single side loading fork-lift trucks - Part 1: Stability tests |
| ISO 13563-2-2001 |
單側裝載叉車.第2部分:裝卸6米或更長貨運集裝箱的貨車的附加穩定性試驗 |
Single side loading fork-lift trucks - Part 2: Additional stability tests for trucks handling freight containers of 6 m length and above |
| ISO 13565-1 Technical Corrigendum 1-1998 |
幾何圖形制品規范.表面紋理:輪廓法.表面分層功能特性.第1部分:篩選和一般測量條件.技術勘誤1 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions; Technical Corrigendum 1 |
| ISO 13565-1-1996 |
幾何產品規范.表面特征:輪廓法.表面分層功能特性.第1部分:篩選和一般測量條件 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surface having stratified functional properties - Part 1: Filtering and general measurement conditions |
| ISO 13565-2 Technical Corrigendum 1-1998 |
幾何圖形制品規范.表面特征:輪廓法.表面分層功能特性.第2部分:利用線性材料比率曲線表示的高度特征.技術勘誤1 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve; Technical Corrigendum 1 |
| ISO 13565-2-1996 |
幾何圖形制品規范.紡織表面:輪廓法.表面分層功能特性.第2部分:利用線材比例曲線表記述高特性 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve |
| ISO 13565-3-1998 |
幾何制品規范.表面特征:輪廓法.表面分層功能特性.第3部分:利用材料的概率曲線表描述高度特性 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 3: Height characterization using the material probability curve |
| ISO 13567-1-1998 |
技術產品文件.計算機輔助設計(CAD)用層的編排和命名.第1部分:綜述和原則 |
Technical product documentation - Organization and naming of layers for CAD - Part 1: Overview and principles |
| ISO 13567-2-1998 |
技術產品文件.計算機輔助設計(CAD)用層的編排和命名.第2部分:結構文件中使用的概念、格式和代碼 |
Technical product documentation - Organization and naming of layers for CAD - Part 2: Concepts, format and codes used in construction documentation |
| ISO 13583-1-2000 |
離心鑄造鋼和合金制品.第1部分:一般試驗和公差 |
Centrifugally cast steel and alloy products - Part 1: General testing and tolerances |
| ISO 13583-2-2003 |
離心鑄造鋼及合金產品.第2部分:耐熱材料 |
(Centrifugally cast steel and alloy products - Part 2: Heat resistant materials) |
| ISO 13583-2-2003 |
離心鑄造鋼及合金產品.第2部分:耐熱材料 |
|
| ISO 13584-1-2001 |
工業自動化系統和一體化.部件圖書館.第1部分:總體和基本原則 |
Industrial automation systems and integration - Parts library - Part 1: Overview and fundamental principles |
| ISO 13584-101-2003 |
工業自動化系統和集成.零件庫.第101部分:用參數編制的程序表示幾何視圖交換協議 |
(Industrial automation systems and integration - Parts library - Part 101: Geometrical view exchange protocol by parametric program) |
| ISO 13584-101-2003 |
工業自動化系統和集成.零件庫.第101部分:用參數編制的程序表示幾何視圖交換協議 |
|
| ISO 13584-20-1998 |
工業自動化系統和集成電路.零部件數據庫.第20部分:邏輯源.表示式的邏輯模式 |
Industrial automation systems and integration - Parts library - Part 20: Logical resource; Logical model of expressions |
| ISO 13584-24-2003 |
工業自動化系統和集成.零件庫.第24部分:邏輯模型:供應商庫的邏輯模型 |
(Industrial automation systems and integration - Parts library - Part 24: Logical resource: Logical model of supplier library) |
| ISO 13584-24-2003 |
工業自動化系統和集成.零件庫.第24部分:邏輯模型:供應商庫的邏輯模型 |
|
| ISO 13584-25-2004 |
工業自動化系統和集成.零件庫.第25部分:邏輯源:帶總值和確切含量的補充庫用邏輯模型 |
|
| ISO 13584-26-2000 |
工業自動系統和集成.零件庫.第26部分:邏輯源.信息供貨者識別 |
Industrial automation systems and integration - Parts library - Part 26: Logical resource: Information supplier identification |
| ISO 13584-31-1999 |
工業自動化系統和集成.零件程序庫.第31部分:工具實現源:幾何編程接口 |
Industrial automation systems and integration - Parts library - Part 31: Implementation resources: Geometric programming interface |
| ISO 13584-42 Technical Corrigendum 1-2003 |
工業自動化系統和集成.部件程序庫.第42部分:描述方法:組構部件系列的方法.技術勘誤1 |
Industrial automation systems and integration - Parts library - Part 42: Description methodology: Methodology for structuring part families; Technical Corrigendum 1 |
| ISO 13584-42 Technical Corrigendum 1-2003 |
工業自動化系統和集成.部件程序庫.第42部分:描述方法:組構部件系列的方法.技術勘誤1 |
|
| ISO 13584-42 Technical Corrigendum 1-2003 |
工業自動化系統和集成.部件程序庫.第42部分:描述方法:組構部件系列的方法.技術勘誤1 |
|
| ISO 13584-42-1998 |
工業自動化系統和集成.零件程序庫.第42部分:描述方法:組構零件系列的方法 |
Industrial automation systems and integration - Parts library - Part 42: Description methodology: Methodology for structuring part families |
| ISO 13586 AMD 1-2003 |
塑料.斷裂韌性的測定G)和K.線彈性斷裂力學法.修改件1:含不連續增強纖維的注塑成形塑料的試驗指南 |
(Plastics - Determination of fracture toughness (G and K); Linear elastic fracture mechanics (LEFM) approach - Amendment 1: Guidelines for the testing of injection-moulded plastics containing discontinous reinforcing fibres) |
| ISO 13586-2000 |
塑料.斷裂韌性的測定()和().線彈性斷裂力學法 |
Plastics - Determination of fracture toughness (G and K) - Linear elastic fracture mechanics (LEFM) approach |
| ISO 13589-1998 |
航空航天.有埋頭孔的MJ螺紋自鎖緊十二角螺母.分級:1100MPa(室溫)/425℃、1100MPa(室溫)/650℃、1210MPa(室溫)/425℃、1210MPa(室溫)/735℃、1550MPa(室溫)/235℃、1550MPa(室溫)/425℃、1550MPa(室溫)/600℃.尺寸 |
Aerospace - Nuts, bihexagonal, self-locking, with counterbore and MJ threads, classifications: 1100 MPa (at ambient temperature)/425 C, 1100 MPa (at ambient temperature)/650 C, 1210 MPa (at ambient temperature)/425 C, 1210 MPa (at ambient temperature)/730 |
| ISO 13590-1997 |
小型飛機.船舶.結構和系統的安裝要求 |
Small craft - Personal watercraft - Construction and system installation requirements |
| ISO 13590-2003 |
小艇.個人艇.建造及系統安裝要求 |
|
| ISO 13591-1997 |
小型飛行器.舷外發動機用輕便型燃料系統 |
Small craft - Portable fuel systems for outboard motors |
| ISO 13592-1998 |
小型飛機.汽油發動機用回火火焰控制 |
Small craft - Backfire flame control for petrol engines |
| ISO 13595-2000 |
航空航天.涂覆或未涂覆的,金屬材料制的,帶MJ螺紋的,有自鎖浮動螺帽的鑲嵌件 |
Aerospace - Inserts, with self-locking floating nut, with MJ threads, in metallic material, coated or uncoated - Dimensions |
| ISO 13596-2000 |
航空航天.涂覆或未涂覆的,金屬材料制的,帶MJ螺紋的,封閉型,自鎖鑲嵌件.尺寸 |
Aerospace - Inserts, self-locking, with MJ threads, closed type, in metallic material, coated or uncoated - Dimensions |
| ISO 13597-2000 |
航空航天.涂覆或未涂覆的,金屬材料制的,帶MJ螺紋的,開放型,自鎖鑲嵌件.尺寸 |
Aerospace - Inserts, self-locking, with MJ threads, open type, in metallic material, coated or uncoated - Dimensions |
| ISO 13598-2000 |
航空航天.涂覆或未涂覆的,金屬材料制的,封閉型的,縮減法蘭的,帶MJ螺紋的,自鎖鑲嵌件.尺寸 |
Aerospace - Inserts, self-locking, with MJ threads, reduced flanges, closed type, in metallic material, coated or uncoated - Dimensions |
| ISO 13599-2000 |
航空航天.涂覆或未涂覆的,金屬材料制的,帶自由尺寸孔的鑲嵌件.尺寸 |
Aerospace - Inserts, with clearance hole, in metallic material, coated or uncoated - Dimensions |
| ISO 13600 Technical Corrigendum 1-1998 |
工業能源系統.基本概念,.技術勘誤1 |
Technical energy systems - Basic concepts; Technical Corrigendum 1 |
| ISO 13600-1997 |
工業能源體系.基本概念 |
Technical energy systems - Basic concepts |
| ISO 13601-1998 |
技術能源系統.分析結構.能源產品供應和需求部分 |
Technical energy systems - Structure for analysis - Energyware supply and demand sectors |
| ISO 13602-1-2002 |
技術能量系統.分析方法.第1部分:總則 |
Technical energy systems - Method for analysis - Part 1: General |
| ISO 1361-1997 |
薄金屬容器.開頂式二重卷邊罐圓形罐頭.內徑 |
Light-gauge metal containers - Round open-top cans - Internal diameters |
| ISO 13616-1997 |
銀行業務及有關金融服務.國際銀行帳號 |
Banking and related financial services - International Bank Account Number (IBAN) |
| ISO 13616-2003 |
銀行業務和相關金融服務.國際銀行帳號(IBAN) |
(Banking and related financial services - International bank account number (IBAN)) |
| ISO 13616-2003 |
銀行業務和相關金融服務.國際銀行帳號(IBAN) |
|
| ISO 13617-2001 |
船只和船舶技術.船載焚燒爐.要求 |
Ships and marine technology - Shipboard incinerators - Requirements |
| ISO 13623-2000 |
石油和天然氣工業.管道運輸系統 |
Petroleum and natural gas industries - Pipeline transportation systems |
| ISO 13625-2002 |
石油和天然氣工業.鉆井和生產設備.海洋鉆井隔水導管聯接器 |
Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings |
| ISO 13626-2003 |
石油和天然氣工業.鉆井和生產設備.鉆井和井檢修結構 |
(Petroleum and natural gas industries - Drilling and production equipment - Drilling and well-servicing structures) |
| ISO 13626-2003 |
石油和天然氣工業.鉆井和生產設備.鉆井和井檢修結構 |
|
| ISO 13626-2003 |
石油和天然氣工業.鉆井和生產設備.鉆井和井檢修結構 |
|
| ISO 13628-1-1999 |
石油和天然氣工業.水下生產系統的設計和操作.第1部分:一般要求和推薦規程 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations |
| ISO 13628-2-2000 |
石油和天然氣工業.水下生產系統的設計和操作.第2部分:水下和船用軟管系統 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Flexible pipe systems for subsea and marine applications |
| ISO 13628-3-2000 |
石油和天然氣工業.水下生產系統的設計和操作.第3部分:貫通流動時間(TFL)系統 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowtime (TFL) systems |
| ISO 13628-4-1999 |
石油和天然氣工業.水下生產系統的設計和操作.第4部分:井口和主干設備 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment |
| ISO 13628-5-2002 |
石油和天然氣工業.水下采油系統的設計和操作.第5部分:水下纜線和管道 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals |
| ISO 13628-6-2000 |
石油和天然氣工業.海底生產系統的設計和操作.第6部分:海底生產控制系統 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems |
| ISO 13628-8-2002 |
石油和天然氣工業.水下生產系統的設計和操作.第8部分:水下生產系統上的遙控運載工具接口 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems |
| ISO 13628-9-2000 |
石油和天然氣工業.水下生產系統的設計和操作.第9部分:遙控設備干預系統 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 9: Remotely Operated Tools (ROT) intervention systems |
| ISO 13631-2002 |
石油和天然氣工業.包裝用往復式氣體壓縮機 |
Petroleum and natural gas industries - Packaged reciprocating gas compressors |
| ISO 13638-1996 |
房屋建筑.密封膠.耐長期浸在水中粘結力的測定 |
Building construction - Sealants - Determination of resistance to prolonged exposure to water |
| ISO 13640-1999 |
建筑物建造.接縫產品.試驗襯底規范 |
Building construction - Jointing products - Specifications for test substrates |
| ISO 13641-1-2003 |
水質.厭氣菌的氣體生成的抑制測定.第1部分:一般試驗 |
(Water quality - Determination of inhibition of gas production of anaerobic bacteria - Part 1: General test) |
| ISO 13641-1-2003 |
水質.厭氣菌的氣體生成的抑制測定.第1部分:一般試驗 |
|
| ISO 13641-2-2003 |
水質.厭氣菌的氣體生成的抑制測定.第2部分:低生物量濃度試驗 |
(Water quality - Determination of inhibition of gas production of anaerobic bacteria - Part 2: Test at low biomass concentrations) |
| ISO 13641-2-2003 |
水質.厭氣菌的氣體生成的抑制測定.第2部分:低生物量濃度試驗 |
|
| ISO 13653-1996 |
光學和光學儀器.普通光學試驗方法.象場中有關光輝的測量 |
Optics and optical instruments - General optical test methods - Measurement of relative irradiance in the image field |
| ISO 13655-1996 |
制圖技術.制圖藝術成象用光譜測量和比色的計算 |
Graphic technology - Spectral measurement and colorimetric computation for graphic arts images |
| ISO 13656-2000 |
制版技術.工藝控制的比色分析法和反射光密度分析法的應用和印刷品和印樣的評價 |
Graphic technology - Application of reflection densitometry and colorimetry to process control or evaluation of prints and proofs |
| ISO 13658-2000 |
硫化鋅濃縮物.鋅含量的測定.氫氧化物沉淀法和EDTA滴定法 |
Zinc sulfide concentrates - Determination of zinc content - Hydroxide precipitation and EDTA titrimetric method |
| ISO 13663-1995 |
壓力焊接鋼管.不完全薄膜檢驗用焊縫周圍面積的超聲波檢驗 |
Welded steel tubes for pressure purposes - Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections |
| ISO 13664-1997 |
壓力用無逢和焊接鋼管.層狀組織缺陷探測用管端的磁粉檢驗 |
Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube ends for the detection of laminar imperfections |
| ISO 13665-1997 |
壓力用無逢和焊接鋼管.表面缺陷探測用管身的磁粉檢驗 |
Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube body for the detection of surface imperfections |
| ISO 13666-1998 |
眼科光學.眼鏡鏡片.詞匯 |
Ophthalmic optics - Spectacle lenses - Vocabulary |
| ISO 13674-1-2003 |
道路車輛.沿中心駕駛的鑒定試驗.第1部分:搖擺試驗 |
(Road vehicles - Test method for the quantification of on-centre handling - Part 1: Weave test ) |
| ISO 13674-1-2003 |
道路車輛.沿中心駕駛的鑒定試驗.第1部分:搖擺試驗 |
|
| ISO 13678-2000 |
石油和天然氣工業.與套管和直管一起使用的螺紋復合物的評價和試驗 |
Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing and line pipe |
| ISO 13679-2002 |
石油和天然氣工業.套管和管連接的測試程序 |
Petroleum and natural gas industries - Procedures for testing casing and tubing connections |
| ISO 13680 Technical Corrigendum 2-2004 |
石油和天然氣工業.用作套管、油管和接箍的防腐合金無縫鋼管.交貨技術條件.技術勘誤2 |
|
| ISO 13680-2000 |
石油和天然氣工業.裝箱、鋪設管道和連接器材用防腐的合金無縫管.技術交貨條件 |
Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions |
| ISO 13681-1995 |
肉和肉制品.酵母菌和霉菌的計數.菌落計數技術 |
Meat and meat products - Enumeration of yeasts and moulds - Colony-count technique |
| ISO 13683-1997 |
保健產品的消毒.用保健設備進行濕加熱消毒的例行控制和證實要求 |
Sterilization of health care products - Requirements for validation and routine control of moist heat sterilization in health care facilities |
| ISO 13685-1997 |
姜及其含油樹脂.主要刺激素(辛辣味和生姜酚)的含量測定.使用高效液體色譜分析法 |
Ginger and its oleoresins - Determination of the main pungent components (gingerols and shogaols) - Method using high-performance liquid chromatography |
| ISO 13686-1998 |
天然氣.質量名稱與符號 |
Natural gas - Quality designation |
| ISO 13688-1998 |
防護服裝.一般要求 |
Protective clothing - General requirements |
| ISO 13689-2001 |
冷藏輕烴燃料.在含液化器的罐內的液體水平的測量.微波型水平量規 |
Refrigerated light hydrocarbon fluids - Measurement of liquid levels in tanks containing liquefied gases - Microwave-type level gauge |
| ISO 13690-1999 |
谷類作物,豆科作物和磨制產品.靜態批量取樣 |
Cereals, pulses and milled products - Sampling of static batches |
| ISO 13691-2001 |
石油和天然氣工業.特殊用途高速齒輪部件 |
Petroleum and natural gas industries - High-speed special-purpose gear units |
| ISO 13694-2000 |
光學和光學設備.激光和有關激光的設備.激光束能量密度分布的試驗方法 |
Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power [energy] density distribution |
| ISO 13695-2004 |
光學和光子學.激光及其相關設備.激光光譜特性的試驗方法 |
|
| ISO 13696-2002 |
光學和光學儀器.用光學件進行輻射散射的試驗方法 |
Optics and optical Instruments - Test methods for radiation scattered by optical components |
| ISO 137-1975 |
羊毛.纖維直徑的測定.投影顯微鏡法 |
Wool; Determination of fibre diameter; Projection microscope method |
| ISO 13702-1999 |
石油和天然氣工業.近海生產設備著火和爆炸的控制和減弱.要求和導則 |
Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines |
| ISO 13703 Technical Corrigendum 1-2002 |
石油和天然氣工業.近海生產平臺上管道系統的設計和安裝.技術勘誤1 |
Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms; Technical Corrigendum 1 |
| ISO 13703-2000 |
石油和天然氣工業.海上建設平臺管道系統的設計和安裝 |
Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms |
| ISO 13704 Technical Corrigendum 1-2004 |
石油和天然氣工業.石油煉油廠內加熱器管厚度的計算.技術勘誤1 |
|
| ISO 13704-2001 |
石油和天然氣工業.煉油廠用加熱器管厚度的計算 |
Petroleum and natural gas industries - Calculation of heater-tube thickness in petroleum refineries |
| ISO 13705-2001 |
石油和天然氣工業.一般煉油廠的裂解爐 |
Petroleum and natural gas industries - Fired heaters for general refinery service |
| ISO 13706-2000 |
石油和天然氣工業.風冷熱交換器 |
Petroleum and natural gas industries - Air-cooled heat exchangers |
| ISO 13707-2000 |
石油和天然氣工業.往復式壓縮機 |
Petroleum and natural gas industries - Reciprocating compressors |
| ISO 13709-2003 |
石油、石油化工和天然氣工業用離心泵 |
(Centrifugal pumps for petroleum, petrochemical and natural gas industries) |
| ISO 13709-2003 |
石油、石油化工和天然氣工業用離心泵 |
|
| ISO 13709-2003 |
石油、石油化工和天然氣工業用離心泵 |
|
| ISO 13710-2004 |
石油、石油化學和天然氣工業.往復式變容真空泵 |
|
| ISO 13710-2004 |
石油、石油化學和天然氣工業.往復式變容真空泵 |
|
| ISO 13715-2000 |
技術制圖.未定義形狀的邊緣.詞匯和說明 |
Technical drawings - Edges of undefined shape - Vocabulary and indications |
| ISO 13716-1999 |
牙科學.可逆和不可逆水解膠體印模材料系統 |
Dentistry - Reversible-irreversible hydrocolloid impression material systems |
| ISO 13720-1995 |
肉和肉制品.假單胞菌spp.的計數 |
(Meat and meat products - Enumeration of Pseudomonas spp.) |
| ISO 13722-1996 |
肉和肉制品.Brochothrix thermosphacta的計算.菌落計數技術 |
(Meat and meat products - Enumeration of Brochothrix thermosphacta - Colony-count technique) |
| ISO 13726-1998 |
液壓傳動.內徑250mm-500mm的16MPa(160bar)壓實系列單桿液壓缸 |
(Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm - Accessory mounting dimensions) |
| ISO 13730-1996 |
肉和肉制品.總磷含量的測定.分光光度法 |
(Meat and meat products - Determination of total phosphorus content - Spectrometric method) |
| ISO 13731-2001 |
熱環境的人類工效學.詞匯和符號 |
(Ergonomics of the thermal environment - Vocabulary and symbols) |
| ISO 13734 Technical Corrigendum 1-1999 |
天然氣.用做增味劑的有機硫化物.要求和試驗方法.技術勘誤1 |
(Natural gas - Organic sulfur compounds used as odorants - Requirements and test methods; Technical Corrigendum 1) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com